Lines Matching full:ide

1 IDE-CD driver documentation
9 The ide-cd driver should work with all ATAPI ver 1.2 to ATAPI 2.6 compliant 
10 CDROM drives which attach to an IDE interface.  Note that some CDROM vendors
17 (CyCDROM CR520ie) which attaches to the IDE port but is not ATAPI;
47 0. The ide-cd relies on the ide disk driver.  See
48    Documentation/ide/ide.txt for up-to-date information on the ide
51 1. Make sure that the ide and ide-cd drivers are compiled into the
53    entitled "Floppy, IDE, and other block devices", say either `Y' 
59       Include IDE/ATAPI CDROM support
61    Depending on what type of IDE interface you have, you may need to
63    Documentation/ide/ide.txt.
70 3. The CDROM drive should be connected to the host on an IDE
80    on the primary IDE interface are called `hda' and `hdb',
83    in the third position; see Documentation/ide/ide.txt.)
86    driver, you should make sure your IDE interface uses either the
88    the CDROM drive is the only device on the IDE interface, it should
92    when you boot, however.  See Documentation/ide/ide.txt for more
164 Documentation/ide/ide.txt for current information about the underlying
165 IDE support code.  Some of these items apply only to earlier versions
174      Documentation/ide/ide.txt, and check how your hardware is
177    - If your drive is the only device on an IDE interface, it should
180    - If your IDE interface is not at the standard addresses of 0x170
182      lilo option.  See Documentation/ide/ide.txt.  (This feature was
200    - Some IDE adapters require a nonstandard initialization sequence
203      IDE interfaces on sound cards often fall into this category.
208      see Documentation/ide/ide.txt.
230     number of your IDE interface matches what the driver expects.
256     likely cause is that you have a buggy IDE adapter which doesn't
262     foolproof.  See Documentation/ide/ide.txt for more information
298     scripts/MAKEDEV.ide.  (You may have to make it executable