Lines Matching +full:max +full:- +full:speed
16 -----------------
18 * gpio_input: int array (min = 1, max = 17)
19 List of GPIO pins (0-16) to program as inputs
20 * gpio_output: int array (min = 1, max = 17)
21 List of GPIO pins (0-16) to program as outputs
22 * gpio_inverted: int array (min = 1, max = 17)
23 List of GPIO pins (0-16) to program as inverted
24 * gpio_normal: int array (min = 1, max = 17)
25 List of GPIO pins (0-16) to program as normal/non-inverted
26 * gpio_fan: int array (min = 1, max = 8)
27 List of GPIO pins (0-7) to program as fan tachs
31 -----------
37 16 general purpose digital I/O lines, eight (8) fan speed sensors (8-bit),
44 generated. The interrupts can be masked. In addition, there are over-temp
51 corresponds to a minimum fan speed. If the limit is exceeded, an interrupt
54 rounding is done. With a divider of 8, the slowest measurable speed of a
61 higher voltages directly. 3.3V, 5V, 12V, -12V and battery voltage all have
62 dedicated inputs. There are several inputs scaled to 0-3V full-scale range
64 a 0-2.5V full-scale range. A 2.5V or 1.82V reference voltage is provided
72 once-only alarms.
75 times a second. Fan speed measurement time depends on fan speed and
78 The ADM1026 has the ability to automatically control fan speed based on the
80 used to control fan speed. Usually only one of these two outputs will be
86 controlling fan speed with the PWM and DAC outputs. The fan speed sensors