Lines Matching +full:hardware +full:- +full:triggered

5   * National Semiconductor LM78 / LM78-J
7     Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
12     Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
20 -----------
22 This driver implements support for the National Semiconductor LM78, LM78-J
23 and LM79. They are described as 'Microprocessor System Hardware Monitors'.
26 the LM78 and LM78-J are exactly identical. The LM79 has one more VID line,
33 Temperatures are measured in degrees Celsius. An alarm is triggered once
34 when the Overtemperature Shutdown limit is crossed; it is triggered again
39 between -55 and +125 degrees, with a resolution of 1 degree.
42 triggered if the rotation speed has dropped below a programmable limit. Fan
49 An alarm is triggered if the voltage has crossed a programmable minimum
60 If an alarm triggers, it will remain triggered until the hardware register
63 hardware registers are read whenever any data is read (unless it is less
65 miss once-only alarms.