Lines Matching +full:hardware +full:- +full:triggered
7 Addresses scanned: I2C 0x2c - 0x2e
11 Addresses scanned: I2C 0x2c - 0x2e
24 -----------
39 triggered if the rotation speed has dropped below a programmable limit. Fan
46 volts. An alarm is triggered if the voltage has crossed a programmable
50 If an alarm triggers, it will remain triggered until the hardware register
53 hardware registers are read whenever any data is read (unless it is less
55 miss once-only alarms.
61 Hardware Configurations
62 -----------------------
65 depending on the hardware configuration.
68 time. Which are depends on the hardware setup. This driver normally
74 - in0+in5 (default) or temp3
75 - fan1 (default) or in6
76 - fan2 (default) or in7
77 - VID lines (default) or IRQ lines (not handled by this driver)