Lines Matching +full:system +full:- +full:on +full:- +full:chip
7 Addresses scanned: -
9 http://datasheets.maxim-ic.com/en/ds/MAX16065-MAX16066.pdf
12 Addresses scanned: -
14 http://datasheets.maxim-ic.com/en/ds/MAX16067.pdf
17 Addresses scanned: -
19 http://datasheets.maxim-ic.com/en/ds/MAX16068.pdf
22 Addresses scanned: -
24 http://datasheets.maxim-ic.com/en/ds/MAX16070-MAX16071.pdf
27 Author: Guenter Roeck <linux@roeck-us.net>
31 -----------
33 [From datasheets] The MAX16065/MAX16066 flash-configurable system managers
34 monitor and sequence multiple system voltages. The MAX16065/MAX16066 can also
35 accurately monitor (+/-2.5%) one current channel using a dedicated high-side
36 current-sense amplifier. The MAX16065 manages up to twelve system voltages
39 The MAX16067 flash-configurable system manager monitors and sequences multiple
40 system voltages. The MAX16067 manages up to six system voltages simultaneously.
42 The MAX16068 flash-configurable system manager monitors and manages up to six
43 system voltages simultaneously.
45 The MAX16070/MAX16071 flash-configurable system monitors supervise multiple
46 system voltages. The MAX16070/MAX16071 can also accurately monitor (+/-2.5%)
47 one current channel using a dedicated high-side current-sense amplifier. The
48 MAX16070 monitors up to twelve system voltages simultaneously, and the MAX16071
58 -----------
61 can be safely used to identify the chip. You will have to instantiate
62 the devices explicitly. Please see Documentation/i2c/instantiating-devices for
65 WARNING: Do not access chip registers using the i2cdump command, and do not use
66 any of the i2ctools commands on a command register (0xa5 to 0xac). The chips
74 -------------
76 in[0-11]_input Input voltage measurements.
78 in12_input Voltage on CSP (Current Sense Positive) pin.
79 Only if the chip supports current sensing and if
82 in[0-11]_min Low warning limit.
83 Supported on MAX16065, MAX16066, MAX16070, and MAX16071
86 in[0-11]_max High warning limit.
87 Supported on MAX16065, MAX16066, MAX16070, and MAX16071
91 (depending on chip configuration), but not both.
93 in[0-11]_lcrit Low critical limit.
95 in[0-11]_crit High critical limit.
97 in[0-11]_alarm Input voltage alarm.
99 curr1_input Current sense input; only if the chip supports current
104 curr1_alarm Overcurrent alarm; only if the chip supports current