Lines Matching +full:fails +full:- +full:without +full:- +full:test +full:- +full:cd
14 Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
49 BT-948/958/958D, will always be available from my Linux Home Page at URL
60 opportunity to become a beta test site for their latest MultiMaster product,
61 the BT-948 PCI Ultra SCSI Host Adapter, and then again for the BT-958 PCI Wide
82 94555, USA and can be reached at 510/796-6100 or on the World Wide Web at
84 mail at techsup@mylex.com, by Voice at 510/608-2400, or by FAX at 510/745-7715.
106 adapter will attempt to negotiate for 20.0 mega-transfers/second.
111 adapter will attempt to negotiate for 10.0 mega-transfers/second.
116 adapter will attempt to negotiate for 5.0 mega-transfers/second.
135 BusLogic SCSI Host Adapters directly implement SCSI-2 Tagged Queuing, and so
168 handled by issuing a soft reset to the host adapter and re-initialization.
185 The ISA compatible I/O port is disabled by default on the BT-948/958/958D.
208 FlashPoint LT (BT-930) Ultra SCSI-3
209 FlashPoint LT (BT-930R) Ultra SCSI-3 with RAIDPlus
210 FlashPoint LT (BT-920) Ultra SCSI-3 (BT-930 without BIOS)
211 FlashPoint DL (BT-932) Dual Channel Ultra SCSI-3
212 FlashPoint DL (BT-932R) Dual Channel Ultra SCSI-3 with RAIDPlus
213 FlashPoint LW (BT-950) Wide Ultra SCSI-3
214 FlashPoint LW (BT-950R) Wide Ultra SCSI-3 with RAIDPlus
215 FlashPoint DW (BT-952) Dual Channel Wide Ultra SCSI-3
216 FlashPoint DW (BT-952R) Dual Channel Wide Ultra SCSI-3 with RAIDPlus
220 BT-948 PCI Ultra SCSI-3
221 BT-958 PCI Wide Ultra SCSI-3
222 BT-958D PCI Wide Differential Ultra SCSI-3
226 BT-946C PCI Fast SCSI-2
227 BT-956C PCI Wide Fast SCSI-2
228 BT-956CD PCI Wide Differential Fast SCSI-2
229 BT-445C VLB Fast SCSI-2
230 BT-747C EISA Fast SCSI-2
231 BT-757C EISA Wide Fast SCSI-2
232 BT-757CD EISA Wide Differential Fast SCSI-2
233 BT-545C ISA Fast SCSI-2
234 BT-540CF ISA Fast SCSI-2
238 BT-445S VLB Fast SCSI-2
239 BT-747S EISA Fast SCSI-2
240 BT-747D EISA Differential Fast SCSI-2
241 BT-757S EISA Wide Fast SCSI-2
242 BT-757D EISA Wide Differential Fast SCSI-2
243 BT-545S ISA Fast SCSI-2
244 BT-542D ISA Differential Fast SCSI-2
245 BT-742A EISA SCSI-2 (742A revision H)
246 BT-542B ISA SCSI-2 (542B revision H)
250 BT-742A EISA SCSI-2 (742A revisions A - G)
251 BT-542B ISA SCSI-2 (542B revisions A - G)
257 retail kits. The BT- model numbers above refer to the bare board packaging.
258 The retail kit model numbers are found by replacing BT- with KT- in the above
270 striping (RAID-0), and support for mirroring (RAID-1), fixed parity (RAID-4),
271 and distributed parity (RAID-5) is available separately. The built-in Linux
290 BT-948/958/958D INSTALLATION NOTES
292 The BT-948/958/958D PCI Ultra SCSI Host Adapters have some features which may
297 When configured to factory default settings, the BT-948/958/958D will only
299 The BT-948/958/958D will not respond to any of the ISA compatible I/O ports
308 Ctrl-B at system startup and select "Adapter Configuration", "View/Modify
312 possible future I/O port conflicts. The older BT-946C/956C/956CD also have
318 PCI slots are scanned may appear reversed with the BT-948/958/958D as
319 compared to the BT-946C/956C/956CD. For booting from a SCSI disk to work
332 factory default settings of the BT-948/958/958D enumerate the host adapters
334 the AutoSCSI utility via Ctrl-B at system startup and select "Adapter
335 Configuration", "View/Modify Configuration", press Ctrl-F10, and then change
344 The BT-948/958/958D ship with their configuration set to "Factory Default"
371 The "IO:" option specifies an ISA I/O Address to be probed for a non-PCI
465 TaggedQueuing:<Target-Spec>
467 The "TaggedQueuing:<Target-Spec>" or "TQ:<Target-Spec>" option controls
468 Tagged Queuing individually for each Target Device. <Target-Spec> is a
512 each SCSI Command that fails.
548 cd /usr/src
549 tar -xvzf BusLogic-2.0.15.tar.gz
551 patch -p0 < BusLogic.patch (only for 2.0.33 and below)
552 cd linux
565 "buslogic-announce-request@dandelion.com" with the line "subscribe" in the