Lines Matching full:please

63    occurs, please contact Moxa at support@moxa.com.tw.
72     - io-irq.exe Configuration program to setup ISA boards. Please note that
76    GNU General Public License in this version. Please refer to GNU General
84    please refer to hardware installation procedure in the User's Manual.
117        as well as IRQ before installing this driver. Please refer to hardware
119        Please make sure the JP1 is open after the ISA board is set properly.
124        with other ISA devices. Please refer to hardware installation
158        run the driver. If you prefer module driver, please refer to 3.4.
159        If static driver is required, please refer to 3.5.
196        installation, please skip this paragraph.
206           a. You change the driver's major number. Please refer the "3.7"
221           you need to change to other number, please refer section "3.7"
255           <argument> is needed. Please refer to section "3.4.5" for more
268           But if you use ISA board, please modify the "modprobe ..." command
270           rc.mxser, please try to execute "/moxa/mxser/driver/rc.mxser"
272           encountered, please try to modify again. If the modification is
317           please skip this step.
347           You will go into a menu-driven system. Please select [Character
355 	  For appropriate details, please refer to the Linux document.
362 	   f. Please make sure the boot kernel (vmlinuz) is in the
367 	      After checking /etc/lilo.conf, please run "lilo".
408 	  in the system. Please select 2 major numbers that are available.
430    Before using these utilities, please load driver (refer 3.4 & 3.5) and
483    possible. If all the possible solutions fail, please contact our technical
490    To avoid this problem, please unplug fifth and after board, because Moxa
496    which device causes the situation, please check /proc/interrupts to find
501    Each port within the same multiport board shares the same IRQ. Please set
506    Moxa ISA board needs an interrupt vector.Please refer to user's manual
512    Please refer to previous section 3.7 to change a free major number for
518    conflict with other devices. Please refer to previous section 3.7 to