Lines Matching +full:auto +full:- +full:string +full:- +full:detection
2 Advanced Linux Sound Architecture - Driver Configuration guide
22 too. "Debug detection" will add checks for the detection of cards.
38 ----------
47 limiting card index for auto-loading (1-8);
49 For auto-loading more than one card, specify this option
50 together with snd-card-X aliases.
63 Module snd-pcm-oss
64 ------------------
86 regarding opening the device. When this option is non-zero,
90 Module snd-rawmidi
91 ------------------
94 similar to those of the snd-pcm-oss module.
104 --------------------------------------------
114 Default: -1
127 Module snd-adlib
128 ----------------
140 Make sure you have ``sbiload`` from the alsa-tools package available and,
142 number through ``sbiload -l``.
153 sbiload -p 64:0 std.sb drums.sb
156 instead. To have the card produce sound, use ``aplaymidi`` from alsa-utils:
159 aplaymidi -p 64:0 foo.mid
161 Module snd-ad1816a
162 ------------------
171 Module snd-ad1848
172 -----------------
186 The power-management is supported.
188 Module snd-ad1889
189 -----------------
199 Module snd-ali5451
200 ------------------
212 The power-management is supported.
214 Module snd-als100
215 -----------------
221 The power-management is supported.
223 Module snd-als300
224 -----------------
230 The power-management is supported.
232 Module snd-als4000
233 ------------------
239 0 = disabled (default), 1 = auto-detect
243 The power-management is supported.
245 Module snd-asihpi
246 -----------------
256 Module snd-atiixp
257 -----------------
268 If this works for you file a bug with your `lspci -vn` output.
269 (-2 = Force probing, -1 = Default behavior, 0-2 = Use the
272 S/PDIF transfer over AC-link (default = 1)
277 over AC-link and another is over the "direct" SPDIF output. The
281 The power-management is supported.
283 Module snd-atiixp-modem
284 -----------------------
290 Note: The default index value of this module is -2, i.e. the first
293 The power-management is supported.
295 Module snd-au8810, snd-au8820, snd-au8830
296 -----------------------------------------
322 Module snd-azt1605
323 ------------------
337 DMA # for WSS capture (0,1), -1 = disabled (default)
339 port # for MPU-401 UART (0x300,0x330), -1 = disabled (default)
341 IRQ # for MPU-401 UART (3,5,7,9), -1 = disabled (default)
343 port # for OPL3 (0x388), -1 = disabled (default)
355 full-duplex mode. When ``dma1=3``, only ``dma2=0`` is valid and the only way to
364 Module snd-azt2316
365 ------------------
379 DMA # for WSS capture (0,1), -1 = disabled (default)
381 port # for MPU-401 UART (0x300,0x330), -1 = disabled (default)
383 IRQ # for MPU-401 UART (5,7,9,10), -1 = disabled (default)
385 port # for OPL3 (0x388), -1 = disabled (default)
397 full-duplex mode. When ``dma1=3``, only ``dma2=0`` is valid and the only way to
406 Module snd-aw2
407 --------------
413 Module snd-azt2320
414 ------------------
420 The power-management is supported.
422 Module snd-azt3328
423 ------------------
432 Module snd-bt87x
433 ----------------
444 Note: The default index value of this module is -2, i.e. the first
447 Module snd-ca0106
448 -----------------
455 Module snd-cmi8330
456 ------------------
458 Module for sound cards based on C-Media CMI8330 ISA chips.
461 ISA PnP detection - 0 = disable, 1 = enable (default)
488 The power-management is supported.
490 Module snd-cmipci
491 -----------------
493 Module for C-Media CMI8338/8738/8768/8770 PCI sound cards.
500 port address of OPL-3 FM synthesizer (8x38 only):
505 Software-conversion of raw SPDIF packets (model 033 only) (default = 1)
507 Joystick port address (0 = disable, 1 = auto-detect)
511 The power-management is supported.
513 Module snd-cs4231
514 -----------------
521 port # for MPU-401 UART (optional), -1 = disable
525 IRQ # for MPU-401 UART
534 The power-management is supported.
536 Module snd-cs4236
537 -----------------
543 ISA PnP detection - 0 = disable, 1 = enable (default)
548 port # for CS4236 chip (PnP setup - 0x534)
550 control port # for CS4236 chip (PnP setup - 0x120,0x210,0xf00)
552 port # for MPU-401 UART (PnP setup - 0x300), -1 = disable
554 FM port # for CS4236 chip (PnP setup - 0x388), -1 = disable
558 IRQ # for MPU-401 UART (9,11,12,15)
562 second DMA # for CS4236 chip (0,1,3), -1 = disable
568 The power-management is supported.
570 This module is aliased as snd-cs4232 since it provides the old
571 snd-cs4232 functionality, too.
573 Module snd-cs4281
574 -----------------
583 The power-management is supported.
585 Module snd-cs46xx
586 -----------------
603 The power-management is supported.
605 Module snd-cs5530
606 -----------------
610 Module snd-cs5535audio
611 ----------------------
615 The power-management is supported.
617 Module snd-ctxfi
618 ----------------
620 Module for Creative Sound Blaster X-Fi boards (20k1 / 20k2 chips)
622 * Creative Sound Blaster X-Fi Titanium Fatal1ty Champion Series
623 * Creative Sound Blaster X-Fi Titanium Fatal1ty Professional Series
624 * Creative Sound Blaster X-Fi Titanium Professional Audio
625 * Creative Sound Blaster X-Fi Titanium
626 * Creative Sound Blaster X-Fi Elite Pro
627 * Creative Sound Blaster X-Fi Platinum
628 * Creative Sound Blaster X-Fi Fatal1ty
629 * Creative Sound Blaster X-Fi XtremeGamer
630 * Creative Sound Blaster X-Fi XtremeMusic
643 Module snd-darla20
644 ------------------
651 Module snd-darla24
652 ------------------
659 Module snd-dt019x
660 -----------------
662 Module for Diamond Technologies DT-019X / Avance Logic ALS-007 (PnP
668 The power-management is supported.
670 Module snd-dummy
671 ----------------
686 When multiple PCM devices are created, snd-dummy gives different
689 * 1 = non-interleaved with mmap support
691 * 3 = non-interleaved without mmap
693 As default, snd-dummy drivers doesn't allocate the real buffers
699 The power-management is supported.
701 Module snd-echo3g
702 -----------------
709 Module snd-emu10k1
710 ------------------
749 The power-management is supported.
751 Module snd-emu10k1x
752 -------------------
758 Module snd-ens1370
759 ------------------
771 The power-management is supported.
773 Module snd-ens1371
774 ------------------
784 (default), 1 = auto-detect
788 The power-management is supported.
790 Module snd-es1688
791 -----------------
793 Module for ESS AudioDrive ES-1688 and ES-688 sound cards.
796 ISA PnP detection - 0 = disable, 1 = enable (default)
798 port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
800 IRQ # for MPU-401 port (5,7,9,10)
807 port # for ES-1688 chip (0x220,0x240,0x260)
809 IRQ # for ES-1688 chip (5,7,9,10)
811 DMA # for ES-1688 chip (0,1,3)
813 This module supports multiple cards and autoprobe (without MPU-401 port)
816 Module snd-es18xx
817 -----------------
819 Module for ESS AudioDrive ES-18xx sound cards.
822 ISA PnP detection - 0 = disable, 1 = enable (default)
827 port # for ES-18xx chip (0x220,0x240,0x260)
829 port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
833 IRQ # for ES-18xx chip (5,7,9,10)
835 first DMA # for ES-18xx chip (0,1,3)
837 first DMA # for ES-18xx chip (0,1,3)
839 This module supports multiple cards, ISA PnP and autoprobe (without MPU-401
841 When ``dma2`` is equal with ``dma1``, the driver works as half-duplex.
843 The power-management is supported.
845 Module snd-es1938
846 -----------------
848 Module for sound cards based on ESS Solo-1 (ES1938,ES1946) chips.
852 The power-management is supported.
854 Module snd-es1968
855 -----------------
857 Module for sound cards based on ESS Maestro-1/2/2E (ES1968/ES1978) chips.
860 total buffer size in kB (1-4096kB)
862 playback channels (1-8, default=2)
864 capture channels (1-8, default=0)
866 clock (0 = auto-detection)
868 support the power-management (0 = off, 1 = on, 2 = auto (default))
870 enable MPU401 (0 = off, 1 = on, 2 = auto (default))
876 The power-management is supported.
878 Module snd-fm801
879 ----------------
885 1 = MediaForte 256-PCS,
886 2 = MediaForte 256-PCPR,
887 3 = MediaForte 64-PCR
888 High 16-bits are video (radio) device number + 1;
889 example: 0x10002 (MediaForte 256-PCPR, device 1)
893 The power-management is supported.
895 Module snd-gina20
896 -----------------
903 Module snd-gina24
904 -----------------
911 Module snd-gusclassic
912 ---------------------
923 DMA # for GF1 chip (1,3,5,6,7,-1=disable)
925 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
927 GF1 voices limit (14-32)
933 Module snd-gusextreme
934 ---------------------
939 port # for ES-1688 chip (0x220,0x230,0x240,0x250,0x260)
943 port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable
945 IRQ # for ES-1688 chip (5,7,9,10)
949 IRQ # for MPU-401 port (5,7,9,10)
951 DMA # for ES-1688 chip (0,1,3)
955 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
957 GF1 voices limit (14-32)
961 This module supports multiple cards and autoprobe (without MPU-401 port).
963 Module snd-gusmax
964 -----------------
975 DMA # for GF1 chip (1,3,5,6,7,-1=disable)
977 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
979 GF1 voices limit (14-32)
985 Module snd-hda-intel
986 --------------------
998 -1 = system default: choose appropriate one per controller hardware,
999 0 = auto: falls back to LPIB when POSBUF doesn't work,
1002 3 = VIACOMBO: VIA-specific workaround for capture,
1003 4 = COMBO: use LPIB for playback, auto for capture stream
1005 Bitmask to probe codecs (default = -1, meaning all slots);
1014 Passing -1 will make the driver to choose the appropriate
1017 Specifies the early "patch" files to modify the HD-audio setup
1020 is set. See hd-audio/notes.rst for details.
1033 Automatic power-saving timeout (in second, 0 = disable)
1035 Reset HD-audio controller in power-saving mode (default = on)
1046 See hd-audio/notes.rst for more details about HD-audio driver.
1053 is found in hd-audio/models.rst.
1057 "codec-patch". It's sometimes good for testing and debugging.
1060 matches with your device, report it together with alsa-info.sh
1061 output (with ``--no-upload`` option) to kernel bugzilla or alsa-devel
1064 ``power_save`` and ``power_save_controller`` options are for power-saving
1094 This occurs when the access to non-existing or non-working codec slot
1095 (likely a modem one) causes a stall of the communication via HD-audio
1102 The power-management is supported.
1104 Module snd-hdsp
1105 ---------------
1113 the firmware via hdsploader utility included in alsa-tools
1115 The firmware data is found in alsa-firmware package.
1117 Note: snd-page-alloc module does the job which snd-hammerfall-mem
1120 allocation sure, load snd-page-alloc module in the early
1124 Module snd-hdspm
1125 ----------------
1138 Module snd-ice1712
1139 ------------------
1170 Omni I/O support for MidiMan M-Audio Delta44/66
1185 Module snd-ice1724
1186 ------------------
1207 * Chaintech ZNF3-150
1208 * Chaintech ZNF3-250
1210 * Chaintech AV-710
1212 * Onkyo SE-90PCI
1213 * Onkyo SE-200PCI
1217 * EGO-SYS WaveTerminal 192M
1235 Module snd-indigo
1236 -----------------
1243 Module snd-indigodj
1244 -------------------
1251 Module snd-indigoio
1252 -------------------
1259 Module snd-intel8x0
1260 -------------------
1272 AC'97 codec clock base (0 = auto-detect)
1283 Use S/PDIF over AC-link instead of direct connection from the
1284 controller chip (0 = off, 1 = on, -1 = default)
1288 Note: the latest driver supports auto-detection of chip clock.
1293 motherboard has these devices, use the ns558 or snd-mpu401
1296 The power-management is supported.
1298 Module snd-intel8x0m
1299 --------------------
1310 AC'97 codec clock base (0 = auto-detect)
1314 Note: The default index value of this module is -2, i.e. the first
1317 The power-management is supported.
1319 Module snd-interwave
1320 --------------------
1322 Module for Gravis UltraSound PnP, Dynasonic 3-D/Pro, STB Sound Rage 32
1326 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
1334 ISA PnP detection - 0 = disable, 1 = enable (default)
1345 DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
1349 Module snd-interwave-stb
1350 ------------------------
1352 Module for UltraSound 32-Pro (sound card from STB used by Compaq)
1357 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
1365 ISA PnP detection - 0 = disable, 1 = enable (default)
1378 DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
1382 Module snd-jazz16
1383 -------------------
1397 MPU-401 port # (0x300,0x310,0x320,0x330)
1399 MPU-401 irq # (2,3,5,7)
1403 Module snd-korg1212
1404 -------------------
1410 Module snd-layla20
1411 ------------------
1418 Module snd-layla24
1419 ------------------
1426 Module snd-lola
1427 ---------------
1429 Module for Digigram Lola PCI-e boards
1433 Module snd-lx6464es
1434 -------------------
1440 Module snd-maestro3
1441 -------------------
1448 GPIO pin number for external amp (0-15) or -1 for default pin (8
1459 The power-management is supported.
1461 Module snd-mia
1462 ---------------
1469 Module snd-miro
1470 ---------------
1484 MPU-401 port # (0x300,0x310,0x320,0x330)
1486 MPU-401 irq # (5,7,9,10)
1494 Module snd-mixart
1495 -----------------
1505 Install the necessary firmware files in alsa-firmware package.
1507 firmware via mixartloader utility in alsa-tools package.
1509 Module snd-mona
1510 ---------------
1517 Module snd-mpu401
1518 -----------------
1520 Module for MPU-401 UART devices.
1523 port number or -1 (disable)
1525 IRQ number or -1 (disable)
1527 PnP detection - 0 = disable, 1 = enable (default)
1531 Module snd-msnd-classic
1532 -----------------------
1538 Port # for msnd-classic card
1540 IRQ # for msnd-classic card
1548 ISA PnP detection - 0 = disable, 1 = enable (default)
1577 Module snd-msnd-pinnacle
1578 ------------------------
1593 ISA PnP detection - 0 = disable, 1 = enable (default)
1598 Module snd-mtpav
1599 ----------------
1613 Module snd-mts64
1614 ----------------
1621 Module snd-nm256
1622 ----------------
1627 max playback frame size in kB (4-128kB)
1629 max capture frame size in kB (4-128kB)
1645 The power-management is supported.
1648 automatically, or causes hang-up during initialization.
1656 case, use ``force_ac97=1`` option - but *NO* guarantee whether it
1659 Note: The NM256 chip can be linked internally with non-AC97
1663 other drivers, e.g. snd-cs4232 or snd-opl3sa2. Some has ISA-PnP
1668 known hardware like Dell Latitude LS and Sony PCG-F305, this
1678 OSS driver, which is a result of black-magic reverse engineering.
1679 The detection of codec will fail if the driver is loaded *after*
1680 X-server as described above. You might be able to force to load
1681 the module, but it may result in hang-up. Hence, make sure that
1685 Module snd-opl3sa2
1686 ------------------
1688 Module for Yamaha OPL3-SA2/SA3 sound cards.
1691 ISA PnP detection - 0 = disable, 1 = enable (default)
1696 control port # for OPL3-SA chip (0x370)
1698 SB port # for OPL3-SA chip (0x220,0x240)
1700 WSS port # for OPL3-SA chip (0x530,0xe80,0xf40,0x604)
1702 port # for MPU-401 UART (0x300,0x330), -1 = disable
1704 FM port # for OPL3-SA chip (0x388), -1 = disable
1706 IRQ # for OPL3-SA chip (5,7,9,10)
1708 first DMA # for Yamaha OPL3-SA chip (0,1,3)
1710 second DMA # for Yamaha OPL3-SA chip (0,1,3), -1 = disable
1715 The power-management is supported.
1717 Module snd-opti92x-ad1848
1718 -------------------------
1724 ISA PnP detection - 0 = disable, 1 = enable (default)
1731 port # for MPU-401 UART (0x300,0x310,0x320,0x330)
1737 IRQ # for MPU-401 UART (5,7,9,10)
1743 Module snd-opti92x-cs4231
1744 -------------------------
1749 ISA PnP detection - 0 = disable, 1 = enable (default)
1756 port # for MPU-401 UART (0x300,0x310,0x320,0x330)
1762 IRQ # for MPU-401 UART (5,7,9,10)
1770 Module snd-opti93x
1771 ------------------
1776 ISA PnP detection - 0 = disable, 1 = enable (default)
1783 port # for MPU-401 UART (0x300,0x310,0x320,0x330)
1789 IRQ # for MPU-401 UART (5,7,9,10)
1797 Module snd-oxygen
1798 -----------------
1800 Module for sound cards based on the C-Media CMI8786/8787/8788 chip:
1802 * Asound A-8788
1804 * AuzenTech X-Meridian
1805 * AuzenTech X-Meridian 2G
1806 * Bgears b-Enspirer
1808 * HT-Omega Claro (plus)
1809 * HT-Omega Claro halo (XT)
1810 * Kuroutoshikou CMI8787-HG2PCI
1811 * Razer Barracuda AC-1
1818 Module snd-pcsp
1819 ---------------
1821 Module for internal PC-Speaker.
1824 Disable PC-Speaker PCM sound. Only beeps remain.
1831 Module snd-pcxhr
1832 ----------------
1838 Module snd-portman2x4
1839 ---------------------
1845 Module snd-powermac (on ppc only)
1846 ---------------------------------
1848 Module for PowerMac, iMac and iBook on-board soundchips
1857 The power-management is supported.
1859 Module snd-pxa2xx-ac97 (on arm only)
1860 ------------------------------------
1866 The power-management is supported.
1868 Module snd-riptide
1869 ------------------
1885 Module snd-rme32
1886 ----------------
1893 Module snd-rme96
1894 ----------------
1900 Module snd-rme9652
1901 ------------------
1903 Module for RME Digi9652 (Hammerfall, Hammerfall-Light) sound cards.
1910 Note: snd-page-alloc module does the job which snd-hammerfall-mem
1913 allocation sure, load snd-page-alloc module in the early
1917 Module snd-sa11xx-uda1341 (on arm only)
1918 ---------------------------------------
1925 The power-management is supported.
1927 Module snd-sb8
1928 --------------
1930 Module for 8-bit SoundBlaster cards: SoundBlaster 1.0, SoundBlaster 2.0,
1942 The power-management is supported.
1944 Module snd-sb16 and snd-sbawe
1945 -----------------------------
1947 Module for 16-bit SoundBlaster cards: SoundBlaster 16 (PnP),
1951 Mic Auto-Gain-Control - 0 = disable, 1 = enable (default)
1953 ASP/CSP chip support - 0 = disable (default), 1 = enable
1955 ISA PnP detection - 0 = disable, 1 = enable (default)
1962 port # for MPU-401 UART (0x300,0x330), -1 = disable
1964 base port # for EMU8000 synthesizer (0x620,0x640,0x660) (snd-sbawe
1969 8-bit DMA # for SB DSP 4.x chip (0,1,3)
1971 16-bit DMA # for SB DSP 4.x chip (5,6,7)
1975 Note: To use Vibra16X cards in 16-bit half duplex mode, you must
1976 disable 16bit DMA with dma16 = -1 module parameter.
1977 Also, all Sound Blaster 16 type cards can operate in 16-bit
1978 half duplex mode through 8-bit DMA channel by disabling their
1979 16-bit DMA channel.
1981 The power-management is supported.
1983 Module snd-sc6000
1984 -----------------
1986 Module for Gallant SC-6000 soundcard and later models: SC-6600 and
1987 SC-7000.
1996 MPU-401 IRQ # (5,7,9,10) ,0 - no MPU-401 irq
2000 Enable gameport - 0 = disable (default), 1 = enable
2006 Module snd-sscape
2007 -----------------
2018 MPU-401 IRQ # (PnP setup)
2022 2nd DMA # (PnP setup, -1 to disable)
2024 Enable gameport - 0 = disable (default), 1 = enable
2030 Module snd-sun-amd7930 (on sparc only)
2031 --------------------------------------
2037 Module snd-sun-cs4231 (on sparc only)
2038 -------------------------------------
2044 Module snd-sun-dbri (on sparc only)
2045 -----------------------------------
2051 Module snd-wavefront
2052 --------------------
2057 Use CS4232 MPU-401 interface
2060 ISA PnP detection - 0 = disable, 1 = enable (default)
2069 Port # for CS4232 MPU-401 interface.
2071 IRQ # for CS4232 MPU-401 interface (9,11,12,15).
2077 FM OPL-3 Port #
2133 Module snd-sonicvibes
2134 ---------------------
2140 Reverb Enable - 1 = enable, 0 = disable (default);
2143 Mic Gain Enable - 1 = enable, 0 = disable (default)
2147 Module snd-serial-u16550
2148 ------------------------
2155 IRQ # for UART16550A chip, -1 = poll mode
2163 number of MIDI ports in a serial port (1-4)
2167 0 = Soundcanvas, 1 = MS-124T, 2 = MS-124W S/A,
2168 3 = MS-124W M/B, 4 = Generic
2173 Module snd-trident
2174 ------------------
2180 * AzTech PCI 64-Q3D
2183 * Shark Predator4D-PCI
2191 max wavetable size in kB (4-?kb)
2195 The power-management is supported.
2197 Module snd-ua101
2198 ----------------
2200 Module for the Edirol UA-101/UA-1000 audio/MIDI interfaces.
2204 Module snd-usb-audio
2205 --------------------
2220 Ignore any USB-controller regarding mixer interface (default: no)
2222 Enable auto-clock selection for UAC2 devices (default: yes)
2229 For architectures with non-coherent memory like ARM or MIPS, the
2232 option, so that the DMA-coherent buffers are allocated and used
2242 the mixer element such as URB error -22. This happens on some
2249 Module snd-usb-caiaq
2250 --------------------
2261 Module snd-usb-usx2y
2262 --------------------
2264 Module for Tascam USB US-122, US-224 and US-428 devices.
2269 in alsa-tools and alsa-firmware packages.
2271 Module snd-via82xx
2272 ------------------
2285 support DXS channels, 0 = auto (default), 1 = enable, 2 = disable,
2312 ``lspci -nv``).
2324 Note: for the MPU401 on VIA823x, use snd-mpu401 driver
2327 The power-management is supported.
2329 Module snd-via82xx-modem
2330 ------------------------
2339 Note: The default index value of this module is -2, i.e. the first
2342 The power-management is supported.
2344 Module snd-virmidi
2345 ------------------
2352 MIDI devices # (1-4, default=4)
2356 Module snd-virtuoso
2357 -------------------
2365 Module snd-vx222
2366 ----------------
2368 Module for Digigram VX-Pocket VX222, V222 v2 and Mic cards.
2379 Install the necessary firmware files in alsa-firmware package.
2381 firmware via vxloader utility in alsa-tools package. To invoke
2386 install snd-vx222 /sbin/modprobe --first-time -i snd-vx222\
2389 (for 2.2/2.4 kernels, add ``post-install /usr/bin/vxloader`` to
2395 /proc/asound/cardX/vx-status proc file.
2397 The power-management is supported.
2399 Module snd-vxpocket
2400 -------------------
2402 Module for Digigram VX-Pocket VX2 and 440 PCMCIA cards.
2417 Install the necessary firmware files in alsa-firmware package.
2419 firmware via vxloader utility in alsa-tools package.
2421 About capture IBL, see the description of snd-vx222 module.
2423 Note: snd-vxp440 driver is merged to snd-vxpocket driver since
2426 The power-management is supported.
2428 Module snd-ymfpci
2429 -----------------
2435 1 (auto-detect for YMF744/754 only)
2438 1 (auto-detect for YMF744/754 only)
2441 1 (auto-detect)
2443 enable shared rear/line-in switch (bool)
2447 The power-management is supported.
2449 Module snd-pdaudiocf
2450 --------------------
2454 The power-management is supported.
2461 specific devices on drivers for on-board AC'97 controllers like
2462 snd-intel8x0. Some hardware have swapped output pins between Master
2464 specifications from version to version :-)
2466 The driver provides the auto-detection of known problematic devices,
2491 For backward compatibility, the corresponding integer value -1, 0, ...
2498 Configuring Non-ISAPNP Cards
2501 When the kernel is configured with ISA-PnP support, the modules
2503 If this option is set, *only* the ISA-PnP devices will be probed.
2504 For probing the non ISA-PnP cards, you have to pass ``isapnp=0`` option
2507 When the kernel is configured without ISA-PnP support, isapnp option
2515 module aliases. The string ``snd-card-%1`` is requested for ALSA native
2518 To auto-load an ALSA driver for OSS services, define the string
2519 ``sound-slot-%i`` where ``%i`` means the slot number for OSS, which
2526 ----- /etc/modprobe.d/alsa.conf
2527 alias snd-card-0 snd-emu10k1
2528 alias sound-slot-0 snd-emu10k1
2529 ----- /etc/modprobe.d/alsa.conf
2531 The available number of auto-loaded sound cards depends on the module
2533 To enable the auto-loading of multiple cards, specify the number of
2543 ----- /etc/modprobe.d/alsa.conf
2546 alias snd-card-0 snd-interwave
2547 alias snd-card-1 snd-ens1371
2548 options snd-interwave index=0
2549 options snd-ens1371 index=1
2551 alias sound-slot-0 snd-interwave
2552 alias sound-slot-1 snd-ens1371
2553 ----- /etc/modprobe.d/alsa.conf
2563 options snd slots=snd-interwave,snd-ens1371
2565 Then, the first slot (#0) is reserved for snd-interwave driver, and
2566 the second (#1) for snd-ens1371. You can omit index option in each
2571 hot-plugging and the resultant slot conflict. For example, in the
2573 other driver (e.g. snd-usb-audio) is loaded before snd-interwave or
2574 snd-ens1371, it will be assigned to the third or later slot.
2577 modules but that name. For example, ``slots=!snd-pcsp`` will reserve
2578 the first slot for any modules but snd-pcsp.
2585 /dev/snd/pcmC0D0[c|p] -> /dev/audio0 (/dev/audio) -> minor 4
2586 /dev/snd/pcmC0D0[c|p] -> /dev/dsp0 (/dev/dsp) -> minor 3
2587 /dev/snd/pcmC0D1[c|p] -> /dev/adsp0 (/dev/adsp) -> minor 12
2588 /dev/snd/pcmC1D0[c|p] -> /dev/audio1 -> minor 4+16 = 20
2589 /dev/snd/pcmC1D0[c|p] -> /dev/dsp1 -> minor 3+16 = 19
2590 /dev/snd/pcmC1D1[c|p] -> /dev/adsp1 -> minor 12+16 = 28
2591 /dev/snd/pcmC2D0[c|p] -> /dev/audio2 -> minor 4+32 = 36
2592 /dev/snd/pcmC2D0[c|p] -> /dev/dsp2 -> minor 3+32 = 39
2593 /dev/snd/pcmC2D1[c|p] -> /dev/adsp2 -> minor 12+32 = 44
2601 options of snd-pcm-oss module.
2608 -------------------------------
2616 number of fragments or zero if auto
2618 size of fragment in bytes or zero if auto
2631 non-block
2632 force non-block mode
2633 whole-frag
2636 no-silence
2638 buggy-ptr
2655 actually loaded due to memory fragmentation. You can pre-allocate the
2656 PCM buffers by loading snd-page-alloc module and write commands to its
2660 Reading the proc file /proc/drivers/snd-page-alloc shows the current
2662 commands to the snd-page-alloc driver:
2676 This will erase the all pre-allocated buffers which are not in
2684 http://www.alsa-project.org
2688 mailto:alsa-devel@alsa-project.org
2689 alsa-info.sh script
2690 http://www.alsa-project.org/alsa-info.sh