Lines Matching full:coprocessor

4 DAX is a coprocessor which resides on the SPARC M7 (DAX1) and M8
11 into the driver and subsequently the Hypervisor and the coprocessor.
13 coprocessor, and the driver interface is not intended for general use.
22 The Hypervisor interface to the coprocessor is described in detail in
31 A coprocessor request is described by a Command Control Block
36 requests to the available coprocessor execution units. A status code
40 is written by the coprocessor to provide execution status. No
45 coprocessor. This is done using the monitored load and mwait
47 coprocessor was designed so that after a request is submitted, the
67 The DAX coprocessor can only operate on physical memory, so before a
68 request can be fed to the coprocessor, all the addresses in a CCB must
139 was actually accepted by the coprocessor. If the accepted length is
159 updated by the coprocessor hardware. Software may take advantage of
201 program a size limit for each address. This prevents the coprocessor
284 the coprocessor writes in units of cache lines.