Lines Matching +full:imx28 +full:- +full:i2c
8 * http://www.opensource.org/licenses/gpl-license.html
12 /dts-v1/;
13 #include "imx28.dtsi"
16 model = "Crystalfontz CFA-10036 Board";
17 compatible = "crystalfontz,cfa10036", "fsl,imx28";
26 ssd1306_cfa10036: ssd1306-10036@0 {
28 fsl,pinmux-ids = <
31 fsl,drive-strength = <MXS_DRIVE_4mA>;
33 fsl,pull-up = <MXS_PULL_DISABLE>;
36 led_pins_cfa10036: leds-10036@0 {
38 fsl,pinmux-ids = <
41 fsl,drive-strength = <MXS_DRIVE_4mA>;
43 fsl,pull-up = <MXS_PULL_DISABLE>;
46 usb0_otg_cfa10036: otg-10036@0 {
48 fsl,pinmux-ids = <
51 fsl,drive-strength = <MXS_DRIVE_4mA>;
53 fsl,pull-up = <MXS_PULL_DISABLE>;
58 fsl,pinmux-ids = <
62 fsl,drive-strength = <0>;
64 fsl,pull-up = <0>;
70 compatible = "fsl,imx28-mmc";
71 pinctrl-names = "default";
72 pinctrl-0 = <&mmc0_4bit_pins_a
74 vmmc-supply = <®_vddio_sd0>;
75 bus-width = <4>;
82 pinctrl-names = "default";
83 pinctrl-0 = <&duart_pins_b>;
87 i2c0: i2c@80058000 {
88 pinctrl-names = "default";
89 pinctrl-0 = <&i2c0_pins_b>;
90 clock-frequency = <400000>;
94 compatible = "solomon,ssd1306fb-i2c";
95 pinctrl-names = "default";
96 pinctrl-0 = <&ssd1306_cfa10036>;
98 reset-gpios = <&gpio2 7 0>;
101 solomon,page-offset = <0>;
102 solomon,com-lrremap;
103 solomon,com-invdir;
104 solomon,com-offset = <32>;
116 pinctrl-names = "default";
117 pinctrl-0 = <&usb0_otg_cfa10036>;
125 compatible = "gpio-leds";
126 pinctrl-names = "default";
127 pinctrl-0 = <&led_pins_cfa10036>;
131 default-state = "on";
135 reg_vddio_sd0: vddio-sd0 {
136 compatible = "regulator-fixed";
137 pinctrl-names = "default";
138 pinctrl-0 = <&mmc_pwr_cfa10036>;
139 regulator-name = "vddio-sd0";
140 regulator-min-microvolt = <3300000>;
141 regulator-max-microvolt = <3300000>;