Lines Matching +full:imx28 +full:- +full:i2c
1 // SPDX-License-Identifier: GPL-2.0+
5 /dts-v1/;
6 #include "imx28.dtsi"
10 compatible = "fsl,imx28-evk", "fsl,imx28";
17 reg_3p3v: regulator-3p3v {
18 compatible = "regulator-fixed";
19 regulator-name = "3P3V";
20 regulator-min-microvolt = <3300000>;
21 regulator-max-microvolt = <3300000>;
22 regulator-always-on;
25 reg_vddio_sd0: regulator-vddio-sd0 {
26 compatible = "regulator-fixed";
27 regulator-name = "vddio-sd0";
28 regulator-min-microvolt = <3300000>;
29 regulator-max-microvolt = <3300000>;
33 reg_fec_3v3: regulator-fec-3v3 {
34 compatible = "regulator-fixed";
35 regulator-name = "fec-3v3";
36 regulator-min-microvolt = <3300000>;
37 regulator-max-microvolt = <3300000>;
41 reg_usb0_vbus: regulator-usb0-vbus {
42 compatible = "regulator-fixed";
43 regulator-name = "usb0_vbus";
44 regulator-min-microvolt = <5000000>;
45 regulator-max-microvolt = <5000000>;
47 enable-active-high;
50 reg_usb1_vbus: regulator-usb1-vbus {
51 compatible = "regulator-fixed";
52 regulator-name = "usb1_vbus";
53 regulator-min-microvolt = <5000000>;
54 regulator-max-microvolt = <5000000>;
56 enable-active-high;
59 reg_lcd_3v3: regulator-lcd-3v3 {
60 compatible = "regulator-fixed";
61 regulator-name = "lcd-3v3";
62 regulator-min-microvolt = <3300000>;
63 regulator-max-microvolt = <3300000>;
65 enable-active-high;
68 reg_can_3v3: regulator-can-3v3 {
69 compatible = "regulator-fixed";
70 regulator-name = "can-3v3";
71 regulator-min-microvolt = <3300000>;
72 regulator-max-microvolt = <3300000>;
74 enable-active-high;
77 reg_lcd_5v: regulator-lcd-5v {
78 compatible = "regulator-fixed";
79 regulator-name = "lcd-5v";
80 regulator-min-microvolt = <5000000>;
81 regulator-max-microvolt = <5000000>;
87 dvdd-supply = <®_lcd_3v3>;
88 avdd-supply = <®_lcd_5v>;
92 remote-endpoint = <&display_out>;
99 gpmi-nand@8000c000 {
100 pinctrl-names = "default";
101 pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
107 compatible = "fsl,imx28-mmc";
108 pinctrl-names = "default";
109 pinctrl-0 = <&mmc0_8bit_pins_a
111 bus-width = <8>;
112 wp-gpios = <&gpio2 12 0>;
113 vmmc-supply = <®_vddio_sd0>;
118 compatible = "fsl,imx28-mmc";
119 bus-width = <8>;
120 wp-gpios = <&gpio0 28 0>;
124 #address-cells = <1>;
125 #size-cells = <0>;
126 compatible = "fsl,imx28-spi";
127 pinctrl-names = "default";
128 pinctrl-0 = <&spi2_pins_a>;
132 #address-cells = <1>;
133 #size-cells = <1>;
134 compatible = "sst,sst25vf016b", "jedec,spi-nor";
135 spi-max-frequency = <40000000>;
141 pinctrl-names = "default";
142 pinctrl-0 = <&hog_pins_a>;
146 fsl,pinmux-ids = <
156 fsl,drive-strength = <MXS_DRIVE_4mA>;
158 fsl,pull-up = <MXS_PULL_DISABLE>;
163 fsl,pinmux-ids = <
166 fsl,drive-strength = <MXS_DRIVE_4mA>;
168 fsl,pull-up = <MXS_PULL_DISABLE>;
171 gpmi_pins_evk: gpmi-nand-evk@0 {
173 fsl,pinmux-ids = <
177 fsl,drive-strength = <MXS_DRIVE_4mA>;
179 fsl,pull-up = <MXS_PULL_DISABLE>;
182 lcdif_pins_evk: lcdif-evk@0 {
184 fsl,pinmux-ids = <
190 fsl,drive-strength = <MXS_DRIVE_4mA>;
192 fsl,pull-up = <MXS_PULL_DISABLE>;
197 pinctrl-names = "default";
198 pinctrl-0 = <&lcdif_24bit_pins_a
204 remote-endpoint = <&panel_in>;
210 pinctrl-names = "default";
211 pinctrl-0 = <&can0_pins_a>;
212 xceiver-supply = <®_can_3v3>;
217 pinctrl-names = "default";
218 pinctrl-0 = <&can1_pins_a>;
219 xceiver-supply = <®_can_3v3>;
226 pinctrl-names = "default";
227 pinctrl-0 = <&saif0_pins_a>;
232 pinctrl-names = "default";
233 pinctrl-0 = <&saif1_pins_a>;
234 fsl,saif-master = <&saif0>;
240 fsl,lradc-touchscreen-wires = <4>;
241 fsl,ave-ctrl = <4>;
242 fsl,ave-delay = <2>;
246 i2c0: i2c@80058000 {
247 pinctrl-names = "default";
248 pinctrl-0 = <&i2c0_pins_a>;
254 #sound-dai-cells = <0>;
255 VDDA-supply = <®_3p3v>;
256 VDDIO-supply = <®_3p3v>;
268 pinctrl-names = "default";
269 pinctrl-0 = <&pwm2_pins_a>;
274 pinctrl-names = "default";
275 pinctrl-0 = <&duart_pins_a>;
280 pinctrl-names = "default";
281 pinctrl-0 = <&auart0_pins_a>;
282 uart-has-rtscts;
287 pinctrl-names = "default";
288 pinctrl-0 = <&auart3_pins_a>;
304 pinctrl-names = "default";
305 pinctrl-0 = <&usb0_id_pins_a>;
306 vbus-supply = <®_usb0_vbus>;
311 vbus-supply = <®_usb1_vbus>;
316 phy-mode = "rmii";
317 pinctrl-names = "default";
318 pinctrl-0 = <&mac0_pins_a>;
319 phy-supply = <®_fec_3v3>;
320 phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
321 phy-reset-duration = <100>;
326 phy-mode = "rmii";
327 pinctrl-names = "default";
328 pinctrl-0 = <&mac1_pins_a>;
334 compatible = "fsl,imx28-evk-sgtl5000",
335 "fsl,mxs-audio-sgtl5000";
336 model = "imx28-evk-sgtl5000";
337 saif-controllers = <&saif0 &saif1>;
338 audio-codec = <&sgtl5000>;
342 compatible = "gpio-leds";
343 pinctrl-names = "default";
344 pinctrl-0 = <&led_pin_gpio3_5>;
349 linux,default-trigger = "heartbeat";
354 compatible = "pwm-backlight";
356 brightness-levels = <0 4 8 16 32 64 128 255>;
357 default-brightness-level = <6>;