Lines Matching full:default

18 /* Vendor ID Low byte, default value: 0x01 */
21 /* Vendor ID High byte, default value: 0x00 */
24 /* Device ID Low byte, default value: 0x60 */
27 /* Device ID High byte, default value: 0x86 */
30 /* Device Revision, default value: 0x10 */
33 /* OTP DBYTE510, default value: 0x00 */
36 /* System Control #1, default value: 0x00 */
47 /* System Control DPD, default value: 0x90 */
57 /* Dual link Control, default value: 0x00 */
68 /* PWD Software Reset, default value: 0x20 */
79 /* AKSV_1, default value: 0x00 */
82 /* Video H Resolution #1, default value: 0x00 */
85 /* Video Mode, default value: 0x00 */
89 /* Video Input Mode, default value: 0xc0 */
99 /* I2C Address reassignment, default value: 0x00 */
104 /* Fast Interrupt Status, default value: 0x00 */
125 /* GPIO Control, default value: 0x15 */
134 /* Interrupt Control, default value: 0x06 */
140 /* Interrupt State, default value: 0x00 */
144 /* Interrupt Source #1, default value: 0x00 */
147 /* Interrupt Source #2, default value: 0x00 */
150 /* Interrupt Source #3, default value: 0x01 */
154 /* Interrupt Source #5, default value: 0x00 */
157 /* Interrupt #1 Mask, default value: 0x00 */
160 /* Interrupt #2 Mask, default value: 0x00 */
163 /* Interrupt #3 Mask, default value: 0x00 */
166 /* Interrupt #5 Mask, default value: 0x00 */
170 /* Hot Plug Connection Control, default value: 0x45 */
181 /* GPIO Control, default value: 0x55 */
192 /* Interrupt Source 7, default value: 0x00 */
195 /* Interrupt Source 8, default value: 0x00 */
198 /* Interrupt #7 Mask, default value: 0x00 */
201 /* Interrupt #8 Mask, default value: 0x00 */
206 /* IEEE, default value: 0x10 */
210 /* TMDS Control #4, default value: 0x02 */
215 /* BIST CNTL, default value: 0x00 */
226 /* BIST DURATION0, default value: 0x00 */
230 /* BIST VIDEO_MODE, default value: 0x00 */
234 /* BIST DURATION0, default value: 0x00 */
237 /* BIST DURATION1, default value: 0x00 */
240 /* BIST DURATION2, default value: 0x00 */
243 /* BIST 8BIT_PATTERN, default value: 0x00 */
246 /* LM DDC, default value: 0x80 */
255 /* DDC I2C Manual, default value: 0x03 */
266 /* DDC I2C Target Slave Address, default value: 0x00 */
270 /* DDC I2C Target Segment Address, default value: 0x00 */
273 /* DDC I2C Target Offset Address, default value: 0x00 */
276 /* DDC I2C Data In count #1, default value: 0x00 */
279 /* DDC I2C Data In count #2, default value: 0x00 */
283 /* DDC I2C Status, default value: 0x04 */
293 /* DDC I2C Command, default value: 0x70 */
304 /* DDC I2C FIFO Data In/Out, default value: 0x00 */
307 /* DDC I2C Data Out Counter, default value: 0x00 */
312 /* DDC I2C Delay Count, default value: 0x14 */
315 /* Test Control, default value: 0x80 */
323 /* CBUS Address, default value: 0x00 */
332 /* USBT CTRL0, default value: 0x00 */
341 /* HSIC RX Control3, default value: 0x07 */
352 /* TDM TX NUMBITS, default value: 0x0c */
358 /* TDM TX NUMSPISYM, default value: 0x04 */
361 /* TDM TX NUMHSICSYM, default value: 0x14 */
364 /* TDM TX NUMTOTSYM, default value: 0x18 */
367 /* TDM TX INT Low, default value: 0x00 */
378 /* TDM TX INT High, default value: 0x00 */
389 /* TDM RX Control, default value: 0x1c */
395 /* TDM RX NUMSPISYM, default value: 0x04 */
398 /* TDM RX NUMHSICSYM, default value: 0x14 */
401 /* TDM RX NUMTOTSYM, default value: 0x18 */
404 /* TDM RX Status 2nd, default value: 0x00 */
409 /* TDM RX INT Low, default value: 0x00 */
412 /* TDM RX INT High, default value: 0x00 */
417 /* TDM RX INTMASK High, default value: 0x00 */
420 /* HSIC TX CRTL, default value: 0x00 */
428 /* HSIC TX INT Low, default value: 0x00 */
431 /* HSIC TX INT High, default value: 0x00 */
434 /* HSIC Keeper, default value: 0x00 */
440 /* HSIC Flow Control General, default value: 0x02 */
445 /* HSIC Flow Control CTR13, default value: 0xfc */
448 /* HSIC Flow Control CTR14, default value: 0xff */
451 /* HSIC Flow Control CTR15, default value: 0xff */
454 /* HSIC Flow Control CTR50, default value: 0x03 */
457 /* HSIC Flow Control INTR0, default value: 0x00 */
467 /* TDM Low Latency, default value: 0x20 */
475 /* TMDS 0 Clock Control, default value: 0x10 */
480 /* TMDS Clock Enable, default value: 0x00 */
484 /* TMDS Channel Enable, default value: 0x00 */
489 /* BGR_BIAS, default value: 0x07 */
494 /* TMDS 0 Digital I2C BW, default value: 0x0a */
497 /* TMDS 0 Digital Zone Control, default value: 0xe0 */
504 /* TMDS 0 Digital PLL Mode Control, default value: 0x00 */
509 /* MHL Tx Control 6th, default value: 0xa0 */
514 /* Packet Filter0, default value: 0x00 */
525 /* Packet Filter1, default value: 0x00 */
534 /* TMDS Clock Status, default value: 0x10 */
544 /* RX_HDMI Control, default value: 0x10 */
553 /* RX_HDMI Control, default value: 0x38 */
560 /* RX_HDMI Control, default value: 0x0f */
564 /* rx_hdmi Clear Buffer, default value: 0x00 */
574 /* RX_HDMI VSI Header1, default value: 0x00 */
577 /* RX_HDMI VSI MHL Monitor, default value: 0x3c */
583 /* Interrupt Source 9, default value: 0x00 */
589 /* Interrupt 9 Mask, default value: 0x00 */
592 /* TPI CBUS Start, default value: 0x00 */
603 /* EDID Control, default value: 0x10 */
614 /* EDID FIFO Addr, default value: 0x00 */
617 /* EDID FIFO Write Data, default value: 0x00 */
620 /* EDID/DEVCAP FIFO Internal Addr, default value: 0x00 */
623 /* EDID FIFO Read Data, default value: 0x00 */
626 /* EDID DDC Segment Pointer, default value: 0x00 */
629 /* TX IP BIST CNTL and Status, default value: 0x00 */
639 /* TX IP BIST INST LOW, default value: 0x00 */
643 /* TX IP BIST PATTERN LOW, default value: 0x00 */
647 /* TX IP BIST CONFIGURE LOW, default value: 0x00 */
651 /* E-MSC General Control, default value: 0x80 */
662 /* E-MSC Comma ErrorCNT, default value: 0x03 */
667 /* E-MSC RFIFO ByteCnt, default value: 0x00 */
671 /* SPI Burst Cnt Status, default value: 0x00 */
674 /* SPI Burst Status and SWRST, default value: 0x00 */
681 /* E-MSC 1st Interrupt, default value: 0x00 */
692 /* E-MSC Interrupt Mask, default value: 0x00 */
695 /* I2C E-MSC XMIT FIFO Write Port, default value: 0x00 */
698 /* I2C E-MSC RCV FIFO Write Port, default value: 0x00 */
701 /* E-MSC 2nd Interrupt, default value: 0x00 */
705 /* E-MSC Interrupt Mask, default value: 0x00 */
709 /* MHL Top Ctl, default value: 0x00 */
715 /* MHL DataPath 1st Ctl, default value: 0xbc */
721 /* MHL DataPath 2nd Ctl, default value: 0xbb */
726 /* MHL DataPath 3rd Ctl, default value: 0x2f */
733 /* MHL DataPath 4th Ctl, default value: 0x48 */
738 /* MHL DataPath 5th Ctl, default value: 0x48 */
743 /* MHL DataPath 6th Ctl, default value: 0x3f */
751 /* MHL PLL 1st Ctl, default value: 0x05 */
774 /* MHL PLL 3rd Ctl, default value: 0x80 */
781 /* MHL CBUS 1st Ctl, default value: 0x12 */
799 /* MHL CBUS 2nd Ctl, default value: 0x03 */
806 /* MHL CoC 1st Ctl, default value: 0xc3 */
812 /* MHL CoC 2nd Ctl, default value: 0x87 */
817 /* MHL CoC 4th Ctl, default value: 0x00 */
821 /* MHL CoC 5th Ctl, default value: 0x28 */
826 /* MHL CoC 6th Ctl, default value: 0x0d */
829 /* MHL DoC 1st Ctl, default value: 0x18 */
836 /* MHL DataPath 7th Ctl, default value: 0x2a */
845 /* MHL DataPath 8th Ctl, default value: 0x06 */
852 /* Tx Zone Ctl1, default value: 0x00 */
856 /* MHL3 Tx Zone Ctl, default value: 0x00 */
866 /* HDCP Polling Control and Status, default value: 0x70 */
876 /* HDCP Interrupt 0, default value: 0x00 */
879 /* HDCP Interrupt 0 Mask, default value: 0x00 */
882 /* HDCP General Control 0, default value: 0x02 */
893 /* HDCP General Control 1, default value: 0x08 */
901 /* HDCP Misc Control, default value: 0x00 */
909 /* HDCP RPT SMNG K, default value: 0x00 */
912 /* HDCP RPT SMNG In, default value: 0x00 */
915 /* HDCP Auth Status, default value: 0x00 */
918 /* HDCP RPT RCVID Out, default value: 0x00 */
921 /* HDCP TP1, default value: 0x62 */
924 /* HDCP GP Out 0, default value: 0x00 */
927 /* HDCP Repeater RCVR ID 0, default value: 0x00 */
930 /* HDCP DDCM Status, default value: 0x00 */
935 /* HDMI2MHL3 Control, default value: 0x0a */
950 /* HDMI2MHL3 Port0 Control, default value: 0x04 */
962 /* HDMI2MHL3 Scramble Control, default value: 0x41 */
967 /* HSIC Div Ctl, default value: 0x05 */
972 /* MHL Capability 1st Byte, default value: 0x00 */
975 /* MHL Interrupt 1st Byte, default value: 0x00 */
978 /* Device Status 1st byte, default value: 0x00 */
981 /* CBUS Scratch Pad 1st Byte, default value: 0x00 */
984 /* MHL Extended Capability 1st Byte, default value: 0x00 */
987 /* Device Extended Status 1st byte, default value: 0x00 */
990 /* TPI DTD Byte2, default value: 0x00 */
1002 /* Input Format, default value: 0x00 */
1009 /* Output Format, default value: 0x00 */
1015 /* TPI AVI Check Sum, default value: 0x00 */
1018 /* TPI System Control, default value: 0x00 */
1029 /* TPI COPP Query Data, default value: 0x00 */
1043 /* TPI COPP Control Data, default value: 0x00 */
1052 /* TPI Interrupt Enable, default value: 0x00 */
1055 /* TPI Interrupt Status Low Byte, default value: 0x00 */
1065 /* TPI DS BCAPS Status, default value: 0x00 */
1068 /* TPI BStatus1, default value: 0x00 */
1073 /* TPI BStatus2, default value: 0x10 */
1080 /* TPI HW Optimization Control #3, default value: 0x00 */
1087 /* TPI Info Frame Select, default value: 0x00 */
1101 /* TPI Info Byte #0, default value: 0x00 */
1104 /* CoC Status, default value: 0x00 */
1115 /* CoC 1st Ctl, default value: 0x40 */
1118 /* CoC 2nd Ctl, default value: 0x0a */
1123 /* CoC 3rd Ctl, default value: 0x14 */
1128 /* CoC 4th Ctl, default value: 0x40 */
1133 /* CoC 7th Ctl, default value: 0x00 */
1139 /* CoC 8th Ctl, default value: 0x06 */
1147 /* CoC 10th Ctl, default value: 0x00 */
1150 /* CoC 11th Ctl, default value: 0x00 */
1153 /* CoC 12th Ctl, default value: 0x00 */
1156 /* CoC 13th Ctl, default value: 0x0f */
1159 /* CoC 14th Ctl, default value: 0x0a */
1164 /* CoC 15th Ctl, default value: 0x0a */
1169 /* CoC 16th Ctl, default value: 0x00 */
1174 /* CoC 18th Ctl, default value: 0x32 */
1179 /* CoC 21st Ctl, default value: 0x00 */
1184 /* CoC 22nd Ctl, default value: 0x00 */
1190 /* CoC Interrupt, default value: 0x00 */
1193 /* CoC Interrupt Mask, default value: 0x00 */
1198 /* CoC Misc Ctl, default value: 0x00 */
1202 /* CoC 24th Ctl, default value: 0x00 */
1207 /* CoC 25th Ctl, default value: 0x00 */
1212 /* CoC 26th Ctl, default value: 0x00 */
1217 /* CoC 27th Ctl, default value: 0x00 */
1222 /* DoC 9th Status, default value: 0x00 */
1225 /* DoC 10th Status, default value: 0x00 */
1228 /* DoC 5th CFG, default value: 0x00 */
1232 /* DoC 1st Ctl, default value: 0x40 */
1235 /* DoC 7th Ctl, default value: 0x00 */
1242 /* DoC 8th Ctl, default value: 0x00 */
1250 /* DoC 9th Ctl, default value: 0x00 */
1257 /* DoC 10th Ctl, default value: 0x00 */
1260 /* DoC 11th Ctl, default value: 0x00 */
1263 /* DoC 15th Ctl, default value: 0x00 */
1270 /* Interrupt Mask 1st, default value: 0x00 */
1273 /* Interrupt Mask 2nd, default value: 0x00 */
1276 /* Interrupt Mask 3rd, default value: 0x00 */
1279 /* Interrupt Mask 4th, default value: 0x00 */
1282 /* MDT Receive Time Out, default value: 0x00 */
1285 /* MDT Transmit Time Out, default value: 0x00 */
1288 /* MDT Receive Control, default value: 0x00 */
1298 /* MDT Receive Read Port, default value: 0x00 */
1301 /* MDT Transmit Control, default value: 0x70 */
1312 /* MDT Receive WRITE Port, default value: 0x00 */
1315 /* MDT RFIFO Status, default value: 0x00 */
1320 /* MDT XFIFO Status, default value: 0x80 */
1326 /* MDT Interrupt 0, default value: 0x0c */
1332 /* MDT Interrupt 0 Mask, default value: 0x00 */
1335 /* MDT Interrupt 1, default value: 0x00 */
1344 /* MDT Interrupt 1 Mask, default value: 0x00 */
1347 /* CBUS Vendor ID, default value: 0x01 */
1350 /* CBUS Connection Status, default value: 0x00 */
1358 /* CBUS Interrupt 1st, default value: 0x00 */
1369 /* CBUS Interrupt Mask 1st, default value: 0x00 */
1372 /* CBUS Interrupt 2nd, default value: 0x00 */
1379 /* CBUS Interrupt Mask 2nd, default value: 0x00 */
1382 /* CBUS DDC Abort Interrupt, default value: 0x00 */
1385 /* CBUS DDC Abort Interrupt Mask, default value: 0x00 */
1388 /* CBUS MSC Requester Abort Interrupt, default value: 0x00 */
1391 /* CBUS MSC Requester Abort Interrupt Mask, default value: 0x00 */
1394 /* CBUS MSC Responder Abort Interrupt, default value: 0x00 */
1397 /* CBUS MSC Responder Abort Interrupt Mask, default value: 0x00 */
1400 /* CBUS RX DISCOVERY interrupt, default value: 0x00 */
1403 /* CBUS RX DISCOVERY Interrupt Mask, default value: 0x00 */
1406 /* CBUS_Link_Layer Control #8, default value: 0x00 */
1409 /* MDT State Machine Status, default value: 0x00 */
1414 /* CBUS MSC command trigger, default value: 0x00 */
1423 /* CBUS MSC Command/Offset, default value: 0x00 */
1438 /* CBUS MSC Heartbeat Control, default value: 0x27 */
1444 /* CBUS MSC Compatibility Control, default value: 0x02 */
1452 /* CBUS3 Converter Control, default value: 0x24 */
1459 /* Discovery Control1, default value: 0x24 */
1471 /* Discovery Control4, default value: 0x80 */
1477 /* Discovery Control5, default value: 0x03 */
1482 /* Discovery Control8, default value: 0x81 */
1487 /* Discovery Control9, default value: 0x54 */
1497 /* Discovery Status1, default value: 0x00 */
1502 /* Discovery Status2, default value: 0x00 */
1520 /* Interrupt CBUS_reg1 INTR0, default value: 0x00 */
1532 /* Interrupt CBUS_reg1 INTR0 Mask, default value: 0x00 */