Lines Matching full:command
49 * @pmb: pointer to the driver internal queue element for mailbox command.
52 * The dump mailbox command provides a method for the device driver to obtain
55 * This routine prepares the mailbox command for dumping list of static
108 * @pmb: pointer to the driver internal queue element for mailbox command.
110 * This routine prepares a mailbox command to bring down HBA link.
123 * lpfc_dump_mem - Prepare a mailbox command for reading a region.
125 * @pmb: pointer to the driver internal queue element for mailbox command.
129 * The dump mailbox command provides a method for the device driver to obtain
132 * This routine prepares the mailbox command for dumping HBA's config region.
160 * lpfc_dump_wakeup_param - Prepare mailbox command for retrieving wakeup params
162 * @pmb: pointer to the driver internal queue element for mailbox command.
164 * This function create a dump memory mailbox command to dump wake up
194 * lpfc_read_nv - Prepare a mailbox command for reading HBA's NVRAM param
196 * @pmb: pointer to the driver internal queue element for mailbox command.
198 * The read NVRAM mailbox command returns the HBA's non-volatile parameters
201 * This routine prepares the mailbox command for reading information stored
217 * lpfc_config_async - Prepare a mailbox command for enabling HBA async event
219 * @pmb: pointer to the driver internal queue element for mailbox command.
222 * The asynchronous event enable mailbox command is used to enable the
226 * This routine prepares the mailbox command for enabling HBA asynchronous
244 * lpfc_heart_beat - Prepare a mailbox command for heart beat
246 * @pmb: pointer to the driver internal queue element for mailbox command.
248 * The heart beat mailbox command is used to detect an unresponsive HBA, which
252 * This routine prepares the mailbox command for issuing a heart beat in the
253 * form of mailbox command to the HBA. The timely completion of the heart
254 * beat mailbox command indicates the health of the HBA.
269 * lpfc_read_topology - Prepare a mailbox command for reading HBA topology
271 * @pmb: pointer to the driver internal queue element for mailbox command.
274 * The read topology mailbox command is issued to read the link topology
281 * This routine prepares the mailbox command for reading HBA link topology
284 * memory as part of the execution of the mailbox command.
313 * lpfc_clear_la - Prepare a mailbox command for clearing HBA link attention
315 * @pmb: pointer to the driver internal queue element for mailbox command.
317 * The clear link attention mailbox command is issued to clear the link event
322 * command.
324 * This routine prepares the mailbox command for clearing HBA link attention
342 * lpfc_config_link - Prepare a mailbox command for configuring link on a HBA
344 * @pmb: pointer to the driver internal queue element for mailbox command.
346 * The configure link mailbox command is used before the initialize link
347 * mailbox command to override default value and to configure link-oriented
349 * command would be used after an F_Port login to set the returned DID address
350 * and the fabric timeout values. This command is not valid before a configure
351 * port command has configured the HBA port.
353 * This routine prepares the mailbox command for configuring link on a HBA.
395 * lpfc_config_msi - Prepare a mailbox command for configuring msi-x
397 * @pmb: pointer to the driver internal queue element for mailbox command.
399 * The configure MSI-X mailbox command is used to configure the HBA's SLI-3
428 /* Clear mailbox command fields */ in lpfc_config_msi()
465 /* Set command and owner bit */ in lpfc_config_msi()
473 * lpfc_init_link - Prepare a mailbox command for initialize link on a HBA
475 * @pmb: pointer to the driver internal queue element for mailbox command.
479 * The initialize link mailbox command is used to initialize the Fibre
480 * Channel link. This command must follow a configure port command that
483 * This routine prepares the mailbox command for initializing link on a HBA
581 * lpfc_read_sparam - Prepare a mailbox command for reading HBA parameters
583 * @pmb: pointer to the driver internal queue element for mailbox command.
586 * The read service parameter mailbox command is used to read the HBA port
588 * specified directly by a BDE in the mailbox command. These service
592 * This routine prepares the mailbox command for reading HBA port service
594 * are populated into the mailbox command for the HBA to DMA the service
640 * lpfc_unreg_did - Prepare a mailbox command for unregistering DID
644 * @pmb: pointer to the driver internal queue element for mailbox command.
646 * The unregister DID mailbox command is used to unregister an N_Port/F_Port
648 * command frees an RPI context in the HBA port. This has the effect of
651 * This routine prepares the mailbox command for unregistering a remote
675 * lpfc_read_config - Prepare a mailbox command for reading HBA configuration
677 * @pmb: pointer to the driver internal queue element for mailbox command.
679 * The read configuration mailbox command is used to read the HBA port
680 * configuration parameters. This mailbox command provides a method for
684 * This routine prepares the mailbox command for reading out HBA configuration
701 * lpfc_read_lnk_stat - Prepare a mailbox command for reading HBA link stats
703 * @pmb: pointer to the driver internal queue element for mailbox command.
705 * The read link status mailbox command is used to read the link status from
710 * This routine prepares the mailbox command for reading out HBA link status.
726 * lpfc_reg_rpi - Prepare a mailbox command for registering remote login
731 * @pmb: pointer to the driver internal queue element for mailbox command.
734 * The registration login mailbox command is used to register an N_Port or
741 * This routine prepares the mailbox command for registering remote port login.
743 * HBA with the mailbox command.
797 * lpfc_unreg_login - Prepare a mailbox command for unregistering remote login
801 * @pmb: pointer to the driver internal queue element for mailbox command.
803 * The unregistration login mailbox command is used to unregister an N_Port
804 * or F_Port login. This command frees an RPI context in the HBA. It has the
807 * This routine prepares the mailbox command for unregistering remote port
837 * This routine sends mailbox command to unregister all active RPIs for
869 * lpfc_reg_vpi - Prepare a mailbox command for registering vport identifier
873 * @pmb: pointer to the driver internal queue element for mailbox command.
875 * The registration vport identifier mailbox command is used to activate a
881 * This routine prepares the mailbox command for registering a virtual N_Port.
915 * lpfc_unreg_vpi - Prepare a mailbox command for unregistering vport id
918 * @pmb: pointer to the driver internal queue element for mailbox command.
920 * The unregistration vport identifier mailbox command is used to inactivate
927 * This routine prepares the mailbox command for unregistering a virtual
990 /* Command ring setup for ring */ in lpfc_config_pcb_setup()
1015 * lpfc_read_rev - Prepare a mailbox command for reading HBA revision
1017 * @pmb: pointer to the driver internal queue element for mailbox command.
1019 * The read revision mailbox command is used to read the revision levels of
1025 * This routine prepares the mailbox command for reading HBA revision
1062 * @hbqmb: pointer to the HBQ configuration data structure in mailbox command.
1081 * @hbqmb: pointer to the HBQ configuration data structure in mailbox command.
1103 * @hbqmb: pointer to the HBQ configuration data structure in mailbox command.
1125 * lpfc_config_hbq - Prepare a mailbox command for configuring an HBQ
1130 * @pmb: pointer to the driver internal queue element for mailbox command.
1132 * The configure HBQ (Host Buffer Queue) mailbox command is used to configure
1136 * This routine prepares the mailbox command for configuring an HBQ.
1199 * lpfc_config_ring - Prepare a mailbox command for configuring an IOCB ring
1202 * @pmb: pointer to the driver internal queue element for mailbox command.
1204 * The configure ring mailbox command is used to configure an IOCB ring. This
1210 * configure ring command more than once with the same ring number. The HBA
1213 * This routine prepares the mailbox command for configuring IOCB ring.
1257 * lpfc_config_port - Prepare a mailbox command for configuring port
1259 * @pmb: pointer to the driver internal queue element for mailbox command.
1261 * The configure port mailbox command is used to identify the Port Control
1262 * Block (PCB) in the driver memory. After this command is issued, the
1268 * This routine prepares the mailbox command for configuring port.
1304 mb->un.varCfgPort.ccrp = 1; /* Command Ring Polling */ in lpfc_config_port()
1445 * lpfc_kill_board - Prepare a mailbox command for killing board
1447 * @pmb: pointer to the driver internal queue element for mailbox command.
1449 * The kill board mailbox command is used to tell firmware to perform a
1451 * When the kill board mailbox command is received, the ER3 bit is set to 1
1454 * command.
1456 * This routine prepares the mailbox command for killing the board in
1473 * @mbq: pointer to the driver internal queue element for mailbox command.
1475 * Driver maintains a internal mailbox command queue implemented as a linked
1476 * list. When a mailbox command is issued, it shall be put into the mailbox
1477 * command queue such that they shall be processed orderly as HBA can process
1478 * one mailbox command at a time.
1498 * Driver maintains a internal mailbox command queue implemented as a linked
1499 * list. When a mailbox command is issued, it shall be put into the mailbox
1500 * command queue such that they shall be processed orderly as HBA can process
1501 * one mailbox command at a time. After HBA finished processing a mailbox
1502 * command, the driver will remove a pending mailbox command from the head of
1503 * the mailbox command queue and send to the HBA for processing.
1506 * pointer to the driver internal queue element for mailbox command.
1524 * @mbq: pointer to the driver internal queue element for mailbox command.
1526 * This routine put the completed mailbox command into the mailbox command
1538 * lpfc_mbox_cmpl_put - Put mailbox command into mailbox command complete list
1540 * @mbq: pointer to the driver internal queue element for mailbox command.
1542 * This routine put the completed mailbox command into the mailbox command
1560 * lpfc_mbox_cmd_check - Check the validality of a mailbox command
1562 * @mboxq: pointer to the driver internal queue element for mailbox command.
1564 * This routine is to check whether a mailbox command is valid to be issued.
1566 * is to issue a mailbox command to the mailbox transport.
1573 /* Mailbox command that have a completion handler must also have a in lpfc_mbox_cmd_check()
1590 * lpfc_mbox_dev_check - Check the device state for issuing a mailbox command
1594 * mailbox command. It is used by the mailbox transport API at the time the
1595 * to post a mailbox command to the device.
1614 * lpfc_mbox_tmo_val - Retrieve mailbox command timeout value
1616 * @cmd: mailbox command code.
1619 * command code.
1622 * Timeout value to be used for the given mailbox command
1677 * lpfc_sli4_mbx_sge_set - Set a sge entry in non-embedded mailbox command
1678 * @mbox: pointer to lpfc mbox command.
1683 * This routine sets up an entry in the non-embedded mailbox command at the sge
1700 * lpfc_sli4_mbx_sge_get - Get a sge entry from non-embedded mailbox command
1701 * @mbox: pointer to lpfc mbox command.
1704 * This routine gets an entry from the non-embedded mailbox command at the sge
1721 * lpfc_sli4_mbox_cmd_free - Free a sli4 mailbox command
1723 * @mbox: pointer to lpfc mbox command.
1725 * This routine frees SLI4 specific mailbox command for sending IOCTL command.
1737 /* For embedded mbox command, just free the mbox command */ in lpfc_sli4_mbox_cmd_free()
1743 /* For non-embedded mbox command, we need to free the pages first */ in lpfc_sli4_mbox_cmd_free()
1759 /* Finally, free the mailbox command itself */ in lpfc_sli4_mbox_cmd_free()
1764 * lpfc_sli4_config - Initialize the SLI4 Config Mailbox command
1766 * @mbox: pointer to lpfc mbox command.
1768 * @opcode: The sli4 config sub mailbox command opcode.
1769 * @length: Length of the sli4 config mailbox command (including sub-header).
1771 * This routine sets up the header fields of SLI4 specific mailbox command
1772 * for sending IOCTL command.
1774 * Return: the actual length of the mbox command allocated (mostly useful
1775 * for none embedded mailbox command).
1789 /* Set up SLI4 mailbox command header fields */ in lpfc_sli4_config()
1793 /* Set up SLI4 ioctl command header fields */ in lpfc_sli4_config()
1796 /* Setup for the embedded mbox command */ in lpfc_sli4_config()
1811 /* Setup for the non-embedded mbox command */ in lpfc_sli4_config()
1852 /* Set up main header fields in mailbox command */ in lpfc_sli4_config()
1883 * Return: the actual length of the mbox command allocated.
1893 /* Set up SLI4 ioctl command header fields */ in lpfc_sli4_mbox_rsrc_extent()
1949 * @mbox: pointer to lpfc mbox command queue entry.
1952 * command. If the mailbox command is not MBX_SLI4_CONFIG (0x9B) or if the
1966 /* For embedded mbox command, get opcode from embedded sub-header*/ in lpfc_sli_config_mbox_subsys_get()
1972 /* For non-embedded mbox command, get opcode from first dma page */ in lpfc_sli_config_mbox_subsys_get()
1982 * @mbox: pointer to lpfc mbox command queue entry.
1985 * command. If the mailbox command is not MBX_SLI4_CONFIG (0x9B) or if
1999 /* For embedded mbox command, get opcode from embedded sub-header*/ in lpfc_sli_config_mbox_opcode_get()
2005 /* For non-embedded mbox command, get opcode from first dma page */ in lpfc_sli_config_mbox_opcode_get()
2017 * This routine routine allocates and constructs non-embedded mailbox command
2020 * Return: pointer to the mailbox command constructed if successful, otherwise
2040 /* Set up READ_FCF SLI4_CONFIG mailbox-ioctl command */ in lpfc_sli4_mbx_read_fcf_rec()
2060 /* Set up command fields */ in lpfc_sli4_mbx_read_fcf_rec()
2071 * @mboxq: pointer to lpfc mbox command.
2074 * mailbox command.
2079 /* Set up SLI4 mailbox command header fields */ in lpfc_request_features()
2105 * lpfc_init_vfi - Initialize the INIT_VFI mailbox command
2106 * @mbox: pointer to lpfc mbox command to initialize.
2111 * in the context of an FCF. The driver issues this command to setup a VFI
2136 * lpfc_reg_vfi - Initialize the REG_VFI mailbox command
2137 * @mbox: pointer to lpfc mbox command to initialize.
2215 * lpfc_init_vpi - Initialize the INIT_VPI mailbox command
2217 * @mbox: pointer to lpfc mbox command to initialize.
2220 * The INIT_VPI mailbox command supports virtual N_Ports. The driver uses the
2221 * command to activate a virtual N_Port. The HBA assigns a MAC address to use
2222 * with the virtual N Port. The SLI Host issues this command before issuing a
2238 * lpfc_unreg_vfi - Initialize the UNREG_VFI mailbox command
2239 * @mbox: pointer to lpfc mbox command to initialize.
2242 * The UNREG_VFI mailbox command causes the SLI Host to put a virtual fabric
2260 * @mbox: pointer to lpfc mbox command to initialize.
2262 * This function create a SLI4 dump mailbox command to dump configure
2412 * @mbox: pointer to lpfc mbox command to initialize.
2414 * This function create a SLI4 dump mailbox command to dump configure
2456 * lpfc_reg_fcfi - Initialize the REG_FCFI mailbox command
2458 * @mbox: pointer to lpfc mbox command to initialize.
2460 * The REG_FCFI mailbox command supports Fibre Channel Forwarders (FCFs). The
2461 * SLI Host uses the command to activate an FCF after it has acquired FCF
2462 * information via a READ_FCF mailbox command. This mailbox command also is used
2523 * lpfc_reg_fcfi_mrq - Initialize the REG_FCFI_MRQ mailbox command
2525 * @mbox: pointer to lpfc mbox command to initialize.
2528 * The REG_FCFI_MRQ mailbox command supports Fibre Channel Forwarders (FCFs).
2529 * The SLI Host uses the command to activate an FCF after it has acquired FCF
2530 * information via a READ_FCF mailbox command. This mailbox command also is used
2587 * lpfc_unreg_fcfi - Initialize the UNREG_FCFI mailbox command
2588 * @mbox: pointer to lpfc mbox command to initialize.
2591 * The UNREG_FCFI mailbox command supports Fibre Channel Forwarders (FCFs).
2592 * The SLI Host uses the command to inactivate an FCFI.
2603 * lpfc_resume_rpi - Initialize the RESUME_RPI mailbox command
2604 * @mbox: pointer to lpfc mbox command to initialize.
2607 * The RESUME_RPI mailbox command is used to restart I/O to an RPI after a
2627 * mailbox command.
2628 * @mbox: pointer to lpfc mbox command to initialize.
2630 * The PORT_CAPABILITIES supported pages mailbox command is issued to
2646 * @mbox: pointer to lpfc mbox command to initialize.
2648 * The PORT_CAPABILITIES SLI4 parameters mailbox command is issued to