Lines Matching +full:system +full:- +full:on +full:- +full:module
8 depends on HAS_IOMEM
12 depends on SERIAL_CORE
20 comment "Non-8250 serial port support"
24 depends on ARM_AMBA
34 bool "Support for console on AMBA serial port"
35 depends on SERIAL_AMBA_PL010=y
37 ---help---
38 Say Y here if you wish to use an AMBA PrimeCell UART as the system
39 console (the system console is the device which receives all kernel
43 (/dev/tty0) will still be used as the system console by default, but
51 depends on ARM_AMBA
61 bool "Support for console on AMBA serial port"
62 depends on SERIAL_AMBA_PL011=y
65 ---help---
66 Say Y here if you wish to use an AMBA PrimeCell UART as the system
67 console (the system console is the device which receives all kernel
71 (/dev/tty0) will still be used as the system console by default, but
79 depends on ARM64 || ARM
86 with "earlycon=smh" on the kernel command line. The console is
90 tristate "BCM1xxx on-chip DUART serial support"
91 depends on SIBYTE_SB1xxx_SOC=y
94 ---help---
96 the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that
98 is implemented. Depending on the SOC configuration there may be
101 If unsure, say Y. To compile this driver as a module, choose M here:
102 the module will be called sb1250-duart.
105 bool "Support for console on a BCM1xxx DUART serial port"
106 depends on SERIAL_SB1250_DUART=y
109 ---help---
111 system console (the system console is the device which receives all
118 bool "AT91 on-chip serial port support"
119 depends on ARCH_AT91 || COMPILE_TEST
123 This enables the driver for the on-chip UARTs of the Atmel
127 bool "Support for console on AT91 serial port"
128 depends on SERIAL_ATMEL=y
131 Say Y here if you wish to use an on-chip UART on a Atmel
132 AT91 processor as the system console (the system
137 bool "Support DMA transfers on AT91 serial port"
138 depends on SERIAL_ATMEL
153 depends on SERIAL_ATMEL=y
170 depends on KGDB_SERIAL_CONSOLE
189 depends on ARCH_KS8695
195 bool "Support for console on KS8695 (Centaur) serial port"
196 depends on SERIAL_KS8695=y
200 system console (the system console is the device which
206 depends on ARCH_MESON
209 This enables the driver for the on-chip UARTs of the Amlogic
213 bool "Support for console on meson"
214 depends on SERIAL_MESON=y
219 system console (the system console is the device which
225 depends on ARCH_CLPS711X || COMPILE_TEST
229 This enables the driver for the on-chip UARTs of the Cirrus
233 bool "Support for console on CLPS711X serial port"
234 depends on SERIAL_CLPS711X=y
238 (/dev/tty0) will still be used as the system console by default, but
244 depends on PLAT_SAMSUNG || ARCH_EXYNOS
247 Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
249 provide all of these ports, depending on how the serial port
254 depends on SERIAL_SAMSUNG
261 depends on SERIAL_SAMSUNG
270 depends on SERIAL_SAMSUNG && DEBUG_LL
274 routines that go via the low-level debug printascii()
278 bool "Support for console on Samsung SoC serial port"
279 depends on SERIAL_SAMSUNG=y
283 Allow selection of the S3C24XX on-board serial ports for use as
287 (/dev/tty0) will still be used as the system console by default, but
295 depends on ARCH_SIRF
298 Support for the on-chip UART on the CSR SiRFprimaII series,
300 provide all of these ports, depending on how the serial port
304 bool "Support for console on SiRF SoC serial port"
305 depends on SERIAL_SIRFSOC=y
309 (/dev/tty0) will still be used as the system console by default, but
317 depends on ARCH_TEGRA && TEGRA20_APB_DMA
320 Support for the on-chip UARTs on the NVIDIA Tegra series SOCs
322 provide all of these ports, depending on how the serial port
328 depends on SPI
335 depends on SPI_MASTER
343 that can be controlled through I2C or high-speed SPI.
349 depends on MACH_DECSTATION && 32BIT
352 ---help---
353 DZ11-family serial controllers for DECstations and VAXstations,
357 bool "Support console on DECstation DZ serial driver"
358 depends on SERIAL_DZ=y
361 ---help---
363 system console (the system console is the device which receives all
367 Note that the firmware uses ttyS3 as the serial console on
374 depends on MACH_DECSTATION
377 ---help---
383 If unsure, say Y. To compile this driver as a module, choose M here:
384 the module will be called zs.
387 bool "Support for console on a DECstation Z85C30 serial port"
388 depends on SERIAL_ZS=y
391 ---help---
393 system console (the system console is the device which receives all
397 Note that the firmware uses ttyS1 as the serial console on the
398 Maxine and ttyS3 on the others using this driver.
404 depends on FOOTBRIDGE
407 If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
412 bool "Console on DC21285 serial port"
413 depends on SERIAL_21285=y
416 If you have enabled the serial port on the 21285 footbridge you can
420 (/dev/tty0) will still be used as the system console by default, but
428 depends on MV64X60
434 bool "Support for console on Marvell MPSC serial port"
435 depends on SERIAL_MPSC
438 Say Y here if you want to support a serial console on a Marvell MPSC.
442 depends on ARCH_PXA || ARCH_MMP
447 If you have a machine based on an Intel XScale PXA2xx CPU you
455 depends on !SERIAL_8250
458 bool "Console on PXA serial port (DEPRECATED)"
459 depends on SERIAL_PXA
463 If you have enabled the serial port on the Intel XScale PXA
467 (/dev/tty0) will still be used as the system console by default, but
478 depends on ARCH_SA1100
481 If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
487 bool "Console on SA1100 serial port"
488 depends on SERIAL_SA1100
491 If you have enabled the serial port on the SA1100/SA1110 StrongARM
495 (/dev/tty0) will still be used as the system console by default, but
503 depends on ARCH_MXC || COMPILE_TEST
508 If you have a machine based on a Motorola IMX CPU you
512 bool "Console on IMX serial port"
513 depends on SERIAL_IMX=y
517 If you have enabled the serial port on the Freescale IMX
521 (/dev/tty0) will still be used as the system console by default, but
528 depends on HAS_IOMEM
533 To compile this driver as a module, choose M here: the
534 module will be called uartlite.
537 bool "Support for console on Xilinx uartlite serial port"
538 depends on SERIAL_UARTLITE=y
542 Say Y here if you wish to use a Xilinx uartlite as the system
543 console (the system console is the device which receives all kernel
548 depends on SERIAL_UARTLITE
552 Set this to the number of uartlites in your system, or the number
557 depends on SPARC
564 depends on SPARC
566 This driver supports the Zilog8530 serial ports found on many Sparc
570 bool "Console on Sun Zilog8530 serial port"
571 depends on SERIAL_SUNZILOG=y
574 on your Sparc system as the console, you can do so by answering
579 depends on SPARC && PCI
582 mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able
586 bool "Console on Sun SU serial port"
587 depends on SERIAL_SUNSU=y
590 on your Sparc system as the console, you can do so by answering
595 depends on GSC
598 ---help---
607 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
608 3. Add device ttyB0 to /etc/securetty (if you want to log on as
609 root on this console.)
613 bool "Support for console on serial MUX"
614 depends on SERIAL_MUX=y
620 depends on PARISC && !SERIAL_MUX && VT
624 used as the system console. This is useful for machines in
629 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
630 3. Add device ttyB0 to /etc/securetty (if you want to log on as
631 root on this console.)
636 depends on SPARC && PCI
638 This driver supports the Siemens SAB82532 DUSCC serial ports on newer
643 bool "Console on Sun Siemens SAB82532 serial port"
644 depends on SERIAL_SUNSAB=y
647 on your Sparc system as the console, you can do so by answering
652 depends on SPARC64
654 This driver supports the console device found on SUN4V Sparc
659 depends on SGI_HAS_ZILOG
662 This driver supports the Zilog8530 serial ports found on SGI
666 bool "Console on SGI Zilog8530 serial port"
667 depends on SERIAL_IP22_ZILOG=y
672 depends on SUPERH || ARCH_RENESAS || H8300 || COMPILE_TEST
680 depends on SERIAL_SH_SCI
687 bool "Support for console on SuperH SCI(F)" if EXPERT
688 depends on SERIAL_SH_SCI=y
693 bool "Support for early console on SuperH SCI(F)" if EXPERT
694 depends on SERIAL_SH_SCI=y
701 depends on SERIAL_SH_SCI && DMA_ENGINE
706 depends on SOC_PNX833X
709 If you have a MIPS-based Philips SoC such as PNX8330 and you want
714 depends on SERIAL_PNX8XXX
717 If you have a MIPS-based Philips SoC such as PNX8330 and you want
722 depends on ARCH_LPC32XX && OF
726 Those are UARTs completely different from the Standard UARTs on the
732 depends on SERIAL_HS_LPC32XX=y
736 ports on the LPC32XX as the console, you can do so by answering
750 depends on COLDFIRE
757 depends on SERIAL_MCF
766 depends on SERIAL_MCF
769 Enable a ColdFire internal serial port to be the system console.
773 depends on (M68K && MAC) || PPC_PMAC
776 This driver supports the Zilog z85C30 serial ports found on
782 depends on SERIAL_PMACZILOG
784 The pmac_zilog driver for the z85C30 chip on many powermacs
792 the pmac_zilog and 8250 drivers to co-exist, but may cause
794 access the built-in serial ports on powermacs will need to
797 If you enable this option, any z85c30 ports in the system will
799 unable to use the 8250 module for PCMCIA or other 16C550-style
802 Say N unless you need the z85c30 ports on your (Power)Mac
806 bool "Console on Mac or PowerMac z85c30 serial port"
807 depends on SERIAL_PMACZILOG=y
811 on your (Power)Mac as the console, you can do so by answering
816 depends on CPM2 || CPM1
819 This driver supports the SCC and SMC serial ports on Motorola
823 bool "Support for console on CPM SCC/SMC serial port"
824 depends on SERIAL_CPM=y
827 Say Y here if you wish to use a SCC or SMC CPM UART as the system
828 console (the system console is the device which receives all kernel
832 (/dev/tty0) will still be used as the system console by default, but
840 depends on IA64_GENERIC || IA64_SGI_SN2
844 If you have an SGI Altix and you would like to use the system
850 depends on MACH_PIC32
857 not as a module.
861 depends on SERIAL_PIC32
864 If you have a PIC32, this driver supports the putting a console on one
871 depends on PPC_MPC52xx || PPC_MPC512x
877 module.
880 bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
881 depends on SERIAL_MPC52xx=y
889 depends on SERIAL_MPC52xx_CONSOLE=y
898 depends on PCI && PPC_PSERIES
906 This driver can also be built as a module. If so, the module
911 depends on HAS_TXX9_SERIAL
920 depends on SERIAL_TXX9
925 depends on SERIAL_TXX9=y
930 depends on !SERIAL_8250 && SERIAL_TXX9
934 depends on CPU_VR41XX
943 depends on SERIAL_VR41XX=y
947 a console on a serial port, say Y. Otherwise, say N.
951 depends on PCI
957 box, for instance in order to become a dial-in server. This driver
962 To compile this driver as a module, choose M here: the
963 module will be called jsm.
967 depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4
971 and wish to use the serial ports on this card, say Y.
976 depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3
983 tristate "MSM on-chip serial port support"
984 depends on ARCH_QCOM
989 depends on SERIAL_MSM=y
994 tristate "QCOM on-chip GENI based serial port support"
995 depends on ARCH_QCOM || COMPILE_TEST
996 depends on QCOM_GENI_SE
1001 depends on SERIAL_QCOM_GENI=y
1009 bool "VIA VT8500 on-chip serial port support"
1010 depends on ARCH_VT8500
1015 depends on SERIAL_VT8500=y
1020 depends on ARCH_NETX
1023 If you have a machine based on a Hilscher NetX SoC you
1026 To compile this driver as a module, choose M here: the
1027 module will be called netx-serial.
1030 bool "Console on NetX serial port"
1031 depends on SERIAL_NETX=y
1034 If you have enabled the serial port on the Hilscher NetX SoC
1039 depends on ARCH_OMAP2PLUS
1042 If you have a machine based on an Texas Instruments OMAP CPU you
1046 with the omap-serial driver. DMA support can be enabled from platform
1050 bool "Console on OMAP serial port"
1051 depends on SERIAL_OMAP=y
1058 (/dev/tty0) will still be used as the system console by default, but
1066 depends on LANTIQ
1071 Support for console and UART on Lantiq SoCs.
1075 depends on QUICC_ENGINE
1080 This driver supports the QE serial ports on Freescale embedded
1092 bool "Console on SCCNXP serial port"
1093 depends on SERIAL_SCCNXP=y
1096 Support for console on SCCNXP serial ports.
1104 depends on (SPI_MASTER && !I2C) || I2C
1112 depends on SERIAL_SC16IS7XX
1113 depends on I2C
1118 Enable SC16IS7xx driver on I2C bus,
1125 depends on SERIAL_SC16IS7XX
1126 depends on SPI_MASTER
1130 Enable SC16IS7xx driver on SPI bus,
1138 depends on X86_32 || COMPILE_TEST
1139 ---help---
1140 Add support for UART controller on timberdale.
1145 depends on MIPS || ARM || COMPILE_TEST
1147 This enables the driver for the onchip UART core found on
1153 BCM7xxx (STB) - DOCSIS console
1156 bool "Console on BCM63xx serial port"
1157 depends on SERIAL_BCM63XX=y
1161 If you have enabled the serial port on the BCM63xx CPU
1166 depends on OF && SPARC
1168 ---help---
1172 bool "Console on GRLIB APBUART serial port"
1173 depends on SERIAL_GRLIB_GAISLER_APBUART=y
1176 Support for running a console on the GRLIB APBUART
1186 depends on SERIAL_ALTERA_JTAGUART=y
1190 Enable a Altera JTAG UART port to be the system console.
1194 depends on SERIAL_ALTERA_JTAGUART_CONSOLE
1208 depends on SERIAL_ALTERA_UART
1217 depends on SERIAL_ALTERA_UART
1226 depends on SERIAL_ALTERA_UART=y
1230 Enable a Altera UART port to be the system console.
1234 depends on GPIOLIB || COMPILE_TEST
1235 depends on SPI && HAS_DMA
1237 Support for the IFX6x60 modem devices on Intel MID platforms.
1241 depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
1250 ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
1256 bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
1257 depends on SERIAL_PCH_UART=y
1260 Say Y here if you wish to use the PCH UART as the system console
1261 (the system console is the device which receives all kernel messages and
1266 depends on ARCH_MXS || MACH_ASM9260 || COMPILE_TEST
1275 depends on SERIAL_MXS_AUART=y
1278 Enable a MXS AUART port to be the system console.
1282 depends on OF
1290 depends on SERIAL_XILINX_PS_UART=y
1294 Enable a Cadence UART port to be the system console.
1298 depends on HAVE_CLK && ATH79
1302 built-in UART of the SoC, say Y to this option.
1304 To compile this driver as a module, choose M here: the
1305 module will be called ar933x_uart.
1308 bool "Console on AR933X serial port"
1309 depends on SERIAL_AR933X=y
1312 Enable a built-in UART port of the AR933X to be the system console.
1316 depends on SERIAL_AR933X
1324 depends on ARM && (ARCH_EFM32 || COMPILE_TEST)
1327 This driver support the USART and UART ports on
1332 depends on SERIAL_MPS2_UART
1338 depends on ARCH_MPS2 || COMPILE_TEST
1341 This driver support the UART ports on ARM MPS2.
1345 depends on SERIAL_EFM32_UART=y
1352 Driver for on-chip UART for ARC(Synopsys) for the legacy
1356 bool "Console on ARC UART"
1357 depends on SERIAL_ARC=y
1361 Enable system Console on ARC UART
1365 depends on SERIAL_ARC
1374 depends on PCI
1382 To compile this driver as a module, choose M here: the
1383 module will be called rp2.
1390 depends on SERIAL_RP2
1398 depends on HAS_DMA
1401 Support for the on-chip lpuart on some Freescale SOCs.
1404 bool "Console on Freescale lpuart serial port"
1405 depends on SERIAL_FSL_LPUART=y
1409 If you have enabled the lpuart serial port on the Freescale SoCs,
1414 depends on OF
1417 Support for the on-chip USART on Conexant Digicolor SoCs.
1420 bool "Console on Conexant Digicolor serial port"
1421 depends on SERIAL_CONEXANT_DIGICOLOR=y
1424 If you have enabled the USART serial port on Conexant Digicolor
1430 depends on ARM || COMPILE_TEST
1432 This driver is for the on-chip Asychronous Serial Controller on
1440 bool "Support for console on ST ASC"
1441 depends on SERIAL_ST_ASC=y
1447 depends on MCB
1449 Say yes here to enable support for the MEN 16z135 High Speed UART IP-Core
1450 on a MCB carrier.
1452 This driver can also be build as a module. If so, the module will be called
1457 depends on ARCH_SPRD
1464 depends on SERIAL_SPRD=y
1470 with "earlycon" on the kernel command line. The console is
1476 depends on ARCH_STM32 || COMPILE_TEST
1478 This driver is for the on-chip Serial Controller on
1486 bool "Support for console on STM32"
1487 depends on SERIAL_STM32=y
1492 depends on ARCH_MVEBU || COMPILE_TEST
1496 based on the Armada-3700 SoC and wish to use the on-board serial
1502 bool "Console on Marvell EBU serial port"
1503 depends on SERIAL_MVEBU_UART
1508 Say 'Y' here if you wish to use Armada-3700 UART as the system console.
1509 (the system console is the device which receives all kernel messages
1515 depends on ARCH_ACTIONS || COMPILE_TEST
1519 Say 'Y' here if you wish to use the on-board serial port.
1523 bool "Console on Actions Semi Owl serial port"
1524 depends on SERIAL_OWL=y
1530 as the system console.