Lines Matching full:dram
344 void __iomem *dram_ptr = icom_port->dram; in load_code()
358 /* Zero out DRAM */ in load_code()
375 iram_ptr = (char __iomem *)icom_port->dram + ICOM_IRAM_OFFSET; in load_code()
395 iram_ptr = (char __iomem *) icom_port->dram + ICOM_IRAM_OFFSET; in load_code()
403 writeb(V2_HARDWARE, &(icom_port->dram->misc_flags)); in load_code()
409 &(icom_port->dram->HDLCConfigReg)); in load_code()
410 writeb(0x04, &(icom_port->dram->FlagFillIdleTimer)); /* 0.5 seconds */ in load_code()
411 writeb(0x00, &(icom_port->dram->CmdReg)); in load_code()
412 writeb(0x10, &(icom_port->dram->async_config3)); in load_code()
414 ICOM_ACFG_1STOP_BIT), &(icom_port->dram->async_config2)); in load_code()
416 /*Set up data in icom DRAM to indicate where personality in load_code()
443 writeb((char) ((fw->size + 16)/16), &icom_port->dram->mac_length); in load_code()
444 writel(temp_pci, &icom_port->dram->mac_load_addr); in load_code()
452 shared memory to adapter DRAM. in load_code()
457 writeb(START_DOWNLOAD, &icom_port->dram->sync); in load_code()
462 if (readb(&icom_port->dram->misc_flags) & ICOM_HDW_ACTIVE) in load_code()
472 cable_id = readb(&icom_port->dram->cable_id); in load_code()
490 writeb(ICOM_DISABLE, &(icom_port->dram->disable)); in load_code()
511 if (!icom_port->dram) { in startup()
521 raw_cable_id = readb(&icom_port->dram->cable_id); in startup()
535 raw_cable_id = readb(&icom_port->dram->cable_id); in startup()
610 cmdReg = readb(&icom_port->dram->CmdReg); in shutdown()
612 writeb(cmdReg & ~CMD_SND_BREAK, &icom_port->dram->CmdReg); in shutdown()
652 cmdReg = readb(&ICOM_PORT->dram->CmdReg); in icom_write()
654 &ICOM_PORT->dram->CmdReg); in icom_write()
655 writeb(START_XMIT, &ICOM_PORT->dram->StartXmitCmd); in icom_write()
658 readb(&ICOM_PORT->dram->StartXmitCmd); in icom_write()
673 status = readb(&icom_port->dram->isr); in check_modem_status()
947 local_osr = readb(&ICOM_PORT->dram->osr); in icom_set_mctrl()
965 writeb(local_osr, &ICOM_PORT->dram->osr); in icom_set_mctrl()
975 status = readb(&ICOM_PORT->dram->isr); in icom_get_mctrl()
989 cmdReg = readb(&ICOM_PORT->dram->CmdReg); in icom_stop_tx()
990 writeb(cmdReg | CMD_HOLD_XMIT, &ICOM_PORT->dram->CmdReg); in icom_stop_tx()
998 cmdReg = readb(&ICOM_PORT->dram->CmdReg); in icom_start_tx()
1001 &ICOM_PORT->dram->CmdReg); in icom_start_tx()
1017 xdata = readb(&ICOM_PORT->dram->xchar); in icom_send_xchar()
1020 writeb(ch, &ICOM_PORT->dram->xchar); in icom_send_xchar()
1023 xdata = readb(&ICOM_PORT->dram->xchar); in icom_send_xchar()
1036 cmdReg = readb(&ICOM_PORT->dram->CmdReg); in icom_stop_rx()
1037 writeb(cmdReg & ~CMD_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); in icom_stop_rx()
1047 cmdReg = readb(&ICOM_PORT->dram->CmdReg); in icom_break()
1049 writeb(cmdReg | CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); in icom_break()
1051 writeb(cmdReg & ~CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); in icom_break()
1079 cmdReg = readb(&ICOM_PORT->dram->CmdReg); in icom_close()
1080 writeb(cmdReg & ~CMD_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); in icom_close()
1158 tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); in icom_set_termios()
1163 writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); in icom_set_termios()
1200 writeb(CMD_RCV_DISABLE, &ICOM_PORT->dram->CmdReg); in icom_set_termios()
1203 if (readb(&ICOM_PORT->dram->PrevCmdReg) == 0x00) { in icom_set_termios()
1222 writeb(new_config3, &(ICOM_PORT->dram->async_config3)); in icom_set_termios()
1223 writeb(new_config2, &(ICOM_PORT->dram->async_config2)); in icom_set_termios()
1224 tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); in icom_set_termios()
1226 writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); in icom_set_termios()
1227 writeb(0x04, &(ICOM_PORT->dram->FlagFillIdleTimer)); /* 0.5 seconds */ in icom_set_termios()
1228 writeb(0xFF, &(ICOM_PORT->dram->ier)); /* enable modem signal interrupts */ in icom_set_termios()
1231 writeb(CMD_RESTART, &ICOM_PORT->dram->CmdReg); in icom_set_termios()
1234 if (readb(&ICOM_PORT->dram->CmdReg) == 0x00) { in icom_set_termios()
1244 &ICOM_PORT->dram->RcvStatusAddr); in icom_set_termios()
1249 &ICOM_PORT->dram->XmitStatusAddr); in icom_set_termios()
1251 writeb(CMD_XMIT_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); in icom_set_termios()
1383 icom_port->dram = icom_adapter->base_addr + in icom_load_ports()
1451 writeb(0x00, &icom_port->dram->osr); in icom_remove_adapter()