Lines Matching +full:ipv4 +full:- +full:config +full:- +full:causing +full:- +full:fallback +full:- +full:to +full:- +full:tcp
8 currently a GIT repository. Therefore, revision information specific to an
11 To make it easier to track there older versions in the current GIT
14 "nuttx-6.27").
16 NuttX-0.1.0
17 -----------
23 This release has been verified on both the Linux user-mode and C5471
25 for the C5471 can be found in arch/c5471/doc/test-results.txt.
29 NuttX-0.1.1
30 -----------
42 This release has been verified on the Linux user-mode platform, the
51 NuttX-0.1.2
52 -----------
63 (5) Added 'ls' command to NuttShell (nsh)
66 This release has been verified on the Linux user-mode
72 NuttX-0.2.1
73 -----------
85 This release has been verified on the Linux user-mode
89 has been upgraded to 'beta.'
93 NuttX-0.2.2
94 ------------
99 structure, to better handle different board configurations
105 This release has been verified on the Linux user-mode
114 NuttX-0.2.3
115 ------------
124 This release has been verified on the Linux user-mode
127 the source tree under configs/ntosd-dm320/doc/test-results.
135 NuttX-0.2.4
136 ------------
138 This is the 7th release of NuttX. This release is only to roll out
139 build changes to better support different SoC's that use the same
147 This release has been verified on the Linux user-mode platform
150 configs/ntosd-dm320/doc/test-results and under configs/sim/doc/test-results.
156 NuttX-0.2.5
157 ------------
173 This release has been verified only on the Linux user-mode
179 NuttX-0.2.6
180 -----------
183 bugfix release to correct a number of problems introduced
193 This release has been verified only on the Linux user-mode platform.
197 NuttX-0.2.7
198 -----------
201 release to correct a number of problems reported to me (thanks
203 FAT filesystem logic including stat(), statfs(), and non-standard
204 APIs to manage FAT attributes. At present, FAT long file names and
209 This release has been verified only on the Linux user-mode platform.
213 NuttX-0.2.8
214 -----------
224 This release has been verified only on the Linux user-mode platform.
228 NuttX-0.3.0
229 -----------
232 integration of a network subsystem and the uIP TCP/IP stack into NuttX
238 open issues (see the TODO file). The network subsystem is pre-alpha
242 The baseline functionality of NuttX continues to mature and remains at
243 post-beta (as long as the network is not used).
252 NuttX-0.3.1
253 -----------
256 the integration of a network subsystem and the uIP TCP/IP, UDP, and
259 Many network-related problems have been fixed and the implementation
261 is probably still at the pre-alpha or early level. It is sufficiently
262 complete that you may begin to perform some network integration and
263 is expected to achieve beta level of reliability over the next few
266 The baseline functionality of NuttX continues to mature and remains at
267 post-beta (as long as the network is not used).
276 NuttX-0.3.2
277 -----------
280 the integration of a network subsystem and the uIP TCP/IP, UDP, and
283 Many network-related problems have been fixed and the implementation
286 o TCP-related bug-fixes
287 o TCP performance improvements
293 The level of network reliability is at alpha level is expected to
296 The baseline functionality of NuttX continues to mature and remains at
297 post-beta.
304 NuttX-0.3.3
305 -----------
308 the integration of a network subsystem and the uIP TCP/IP, UDP, and
311 Many network-related problems have been fixed and the implementation
314 o TCP-related bug-fixes for disconnecting sockets
315 o Correction of some TCP read-ahead logic
316 o TCP performance improvements
321 baseline functionality of NuttX continues to mature and remains at
322 post-beta. Open network-related issues include only:
327 o Pending design changes necessary to support multiple network interfaces.
336 NuttX-0.3.4
337 -----------
340 the integration of a network subsystem and the uIP TCP/IP, UDP, and
343 This release is primarily a bug-fix release. New features include
346 o TELNET front-end to NSH,
350 Numerous network related problems were fixed related to DHCPC, UDP
355 baseline functionality of NuttX continues to mature and remains at
356 post-beta or production level.
366 NuttX-0.3.5
367 -----------
369 This is the 17th release of NuttX this release is primarily a bug-fix
370 release and intended to synchronize with the current CVS contents. See
379 NuttX-0.3.6
380 -----------
383 changes. The primary purpose of this release is to synchronize with
384 the release of the pascal-0.1.0 add-on package.
391 * Add support for the add-on Pascal P-Code interpreter (pcode/)
392 (see the pascal-0.1.0 package)
403 a successful build unless the Pascal add-on was present. The
404 tarball was patched to include the fix. Make sure that you download
405 the nuttx-0.3.6.1.tar.gz version to avoid this problem.
407 NuttX-0.3.7
408 -----------
411 preliminary port of NuttX to the ZiLOG z16f 16-bit microcontroller.
413 and the ZiLOG ZDS-II toolchain. See http://www.zilog.com for
417 is only alpha or, perhaps, pre-alpha quality as of this writing.
420 z16f port) continues to improve beyond the late beta level.
422 The z16f port required numerous changes to NuttX to handle:
427 In addition to the z16f port, at least one very critical bug was
428 found and corrected in NuttX: The thread-specific errno value of one
437 NuttX-0.3.8
438 -----------
442 continues the integration of the ZiLOG Z18F and of the Pascal P-Code
443 add-on. This release is synchronized with the release of Pascal-0.1.2.
447 NuttX-0.3.9
448 -----------
451 release. This release includes support for the ZiLOG Z8Encore! micro-
453 the Z80, XTRS platform (http://www.tim-mann.org/xtrs.html).
455 This released has been verified only on the ZiLOG ZDS-II Z8Encore!
460 NuttX-0.3.10
461 ------------
464 release. This release incorporates fixes to correct critical list
467 also includes support to ZiLOG EZ80Acclaim microcontroller (EZ80F91
471 NuttX-0.3.11
472 ------------
490 Please report any errors to me.
494 NuttX-0.3.12
495 ------------
509 * mkfatfs() API can be used to format FAT file systems.
512 Please report any errors to me.
516 NuttX-0.3.13
517 ------------
523 * Fixed problems with Cygwin-based console input. NSH now works
526 * Corrected detection of End-of-File in fgets()
527 * Fixed an error in opendir() that could cause an assertion to fail
530 with O_APPEND to fail.
535 * uIP port now supports multi-threaded, concurrent socket access.
537 another is writing to the socket.
543 - New commands: mkfatfs, mkfifo, sleep, usleep, nice, sh, cd, and pwd
544 - New memory inspection commands and heap usage commands
545 - New capabilities:
546 - Execution of commands in background
547 - Execution of simple scripts
548 - Redirection of command output
549 - Last command status ($?)
550 - Now supports if-then[-else]-fi construct
551 - Other features as noted in the ChangeLog.
555 any errors to me.
559 nutt-0.3.14
560 -----------
567 * Fixed several critical bugs with regard to fat reading and
572 this prohibited correct random access to large files.
577 * Corrected an error in multi-threaded socket handling in send() and
585 * Added support for application access to ICMP protocol stacks
597 report any errors to me.
601 nutt-0.3.15
602 -----------
607 * ROMFS supports mmap() to provide eXecute In Place (XIP) capability
608 * NuttShell (NSH) can be configured to use ROMFS to provide a tiny read-only
616 board. Please report any errors to me.
620 nutt-0.3.16
621 -----------
624 support for USB in NuttX. A set of USB APIs were added to support
625 USB device controller drivers and bindings to USB device class
634 A controller-independent class driver is also included for:
636 serial-to-USB adapter). This driver has only been verified with
640 * Add an option to set aside a separate stack for interrupt
647 (off by 20x in nuttx-0.3.15)
648 * Fixed serial driver bugs related to (1) open counts and (2) recognizing
654 using with a Linux host. Please report any errors to me.
659 ------
667 diff -u -r1.13 up_internal.h
668 --- arch/arm/src/common/up_internal.h 6 Oct 2008 16:20:52 -0000 1.13
669 +++ arch/arm/src/common/up_internal.h 13 Oct 2008 20:48:21 -0000
670 @@ -200,7 +200,8 @@
674 -# define up_netinitialize()
681 NuttX-0.3.17
682 ------------
688 * Added support for SPI-based MMC/SD cards (with an SPI driver
697 (Anyone out there with a USB analyzer? I would love to know what
707 to me.
711 NuttX-0.3.18
712 ------------
719 STR-P711 board.
720 * The Hitachi SH-1 using the SH1_LCEVB1 (SH-1/US7032EVB1) board
728 * A block to character (BCH) driver that allow access a block device as
731 * Added the 'dd' and 'losetup' commands to NSH. These commands
745 1 - The sectors-per-cluster value was being reset to "1".
746 2 - Important lseek logic was omitted when the seek position was zero.
754 to me.
758 NuttX-0.3.19
759 ------------
764 * Add poll() and select() APIs that may be used to monitor for
765 data availability on character devices or TCP/IP sockets.
766 * Implemented support TCP/IP connection backlog. This allows
767 select() to wake-up on new connections to a listener socket.
770 as of the initial check-in).
775 is under development but not ready for check-in yet.
781 * Fixed an important bug in the TCP/IP buffering logic. When
782 TCP/IP read-ahead is enabled and not recv() is in-place when a
783 TCP/IP packet is received, the packet is placed into a read-ahead
784 buffer. However, the old contents of the read-ahead buffer
794 Linux development environment. Please report any errors to me.
798 NuttX-0.4.0
799 -----------
808 errors to me.
810 The version number was bumped up to 0.4.0 in part to reflect the
811 new graphics subsystem, but also to recognize the NuttX is approaching
813 added, Pascal P-code runtime support was added, FAT and ROMFS
815 There were also numerous extensions to the NuttShell, NuttX APIs,
820 NuttX-0.4.1
821 -----------
824 The primary reason for this release is to correct numerous build
825 errors that have accumulated for the ZiLOG ZDS-II based targets.
826 All ZDS-II targets now build correctly (but have not been re-tested).
827 In addition to platform-specific build failures, this release also
835 Please report any errors to me.
839 NuttX-0.4.2
840 -----------
846 for the ez80f910200zcog-d board (eZ80F91-based). That basic
849 next release nuttx-0.4.2. eZ80Acclaim! support has been in the
851 to toolchain issues.
856 due to toolchain issues.
858 These changes were verified only on the ZiLOG eZ80910200zcog-d
859 board. Please report any errors to me.
863 NuttX-0.4.3
864 -----------
870 to support priority inheritance. See the NuttX User Manual for
874 * ez80Acclaim! Corrected several critical, show-stopping bugs on that
876 - Errors in the serial driver interrupts.
877 - An error in the eZ80 table.
880 These changes were verified only on the ZiLOG eZ80910200zcog-d board
881 and on Cygwin-based simulation platform in various configurations.
882 Please report any errors to me.
886 NuttX-0.4.4
887 -----------
896 * Testing was extended to further verify the tiny webserver,
901 These changes were verified only on the ZiLOG eZ80910200zcog-d board
902 using the ZDS-II toolchain in Cygwin-based environment. Please
903 report any errors to me.
907 NuttX-0.4.5
908 -----------
926 NuttX-0.4.6
927 -----------
930 for the Micromint Eagle-100 development board. This board is based
931 around, the Luminary LM3S6918 MCU. This is the first ARM Cortex-M3
933 timer and serial console with configurations to execute the NuttX
934 OS test and to run the NuttShell (NSH). Work is still underway on
935 this port and current plans are to have I2C, SSI, MMC/SD, and
939 work has been set aside until I complete work on the Eagle-100 (I
940 also need to come up with a 3V power supply).
942 Other changes in this release include: Extensions to the SPI interface
943 definition in order to handle 9-bit interfaces to displays. Several
948 NuttX-0.4.7
949 -----------
952 up and extending the Eagle100/LM3S6918 port released in nuttx-0.4.6
955 * Improved reliably and additional drivers for the Eagle-100 board
956 (LM3S6918 ARM Cortex-M3). Additional drivers include Ethernet,
957 SSI, and support for the on-board LEDs and microSD cards.
959 * The SPI-based MMC/SD driver was extended to support SDHC Version
963 the LM3S6918, the LPC2148, the SPI-based MMC/SD driver, and to
968 NuttX-0.4.8
969 -----------
980 the Olimex card slot appears to accept only MMC cards; I have
984 * Support for the CodeSourcery and devkitARM Windows-native GNU
986 LPC2148, and STR711 to support these toolchains under Cygwin.
990 NuttX-0.4.9
991 -----------
995 * Support for a new binary format call NXFLAT that can be used to
999 * Several important bugs were files related to networking and ROMFS.
1004 NuttX-0.4.10
1005 -----------
1011 related bug-fixes and functional additions for THTTPD were added:
1013 * Several new standard C-library functions (fileno, strstr,
1018 non-blocking sockets.
1025 NuttX-0.4.11
1026 ------------
1031 THTTPD have been tested on the Micromint Eagle-100 development board
1032 (Cortex-M3). These tests verify:
1039 A standard CGI interface is used: Information is pasted to the CGI
1041 I/O is redirected to stdin and stdout so that the CGI program only
1042 need to printf() to send its content back to the HTTP client.
1044 Another value to this THTTPD integration effort has been that THTTPD
1049 should consider upgrading to this release.
1053 NuttX-0.4.12
1054 ------------
1057 for the STMicro STM32, Cortex-M3 MCU. The specific port is to the
1058 STMicro STM3210E-EVAL development board based around the STM32F103ZET6
1061 * This basic port includes boot-up logic, interrupt driven serial
1063 * Includes a basic STMicro RIDE7 project that can be used to
1064 perform basic STM32 board bring-up (due to RIDE7 size limitations,
1065 it cannot be used for the full NuttX bring-up).
1077 NuttX-0.4.13
1078 ------------
1082 STM3210E-EVAL development board based around the STM32F103ZET6 MCU
1083 was released in NuttX-0.4.12. This release adds:
1085 * A simple interface definition to support some FLASH, EEPROM,
1089 * Improved Cortex-M3 context switching. This should improve
1091 * Added a USB device-side driver for the STM32. This is an early
1101 * Fixed and optimization-dependent race condition in the clock
1104 cause interrupt operations to failed used for interrupts in a
1109 NuttX-4.14
1110 ----------
1114 STM3210E-EVAL development board based around the STM32F103ZET6 MCU
1115 was released in NuttX-0.4.12 and extended in Nuttx-0.4.13 to include
1121 to provide read-ahead buffering and write buffering for improved
1123 * Added a generic worker thread that can used to defer processing
1124 from an interrupt to a task.
1125 * Defined a generic SD/SDIO interface can can be bound to a MMC/SD
1126 or SDIO driver to provide SDIO support.
1127 * Implemented a an SDIO-based MMC/SD driver using this new SDIO
1132 * Add support to configure an STM32 input GPIO to generate an
1134 * Added support for buttons on the STM3210E-EVAL board.
1136 * Added a configuration to exercise the STM32 with the USB mass
1142 * Fixed several STM32 DMA-related issues. Integrated and debugged
1144 * Fixed several bugs in the STM32 USB device-side driver.
1146 NOTE: This version, 4.14, is equivalent to what would have been
1147 called 0.4.14 to follow 0.4.13. The zero has been eliminated from
1148 the front of the version number to avoid confusion about the state
1149 of development: Some have interpreted the leading zero to mean
1151 Beginning in January 2010, I will switch to the 2010.nn versioning
1152 as many others have done to avoid such confusion.
1156 NuttX-5.0
1157 ---------
1159 This is 47th release of NuttX and the successor to nuttx-4.14. This
1160 major revision number has been incremented to indicate that an
1164 that standard and did not conform to it.
1166 If you have applications running on NuttX-4.14, those applications
1167 should continue to build and execute without problem on NuttX-5.0.
1168 However, if you have device drivers or other OS-internal logic, you
1169 will probably have to make some minor changes to your code to use
1172 * If you include sys/types.h to get the non-standard, fixed width
1175 * Instead, you will need to include stdint.h where the new fixed
1177 * You will have to change all occurrences of the following types:
1179 uint32 -> uint32_t
1180 uint16 -> uint16_t
1181 ubyte -> uint8_t
1182 uint8 -> uint8_t
1183 sint32 -> int32_t
1184 sint16 -> int16_t
1185 sint8 -> int8_t
1187 * In addition, the non-standard type 'boolean' must replaced with
1191 This change in typing caused small changes to many, many files. It
1193 correctly (other than the SDCC-based configurations). Regression
1196 let me know and I will help you to fix them.)
1199 unrelated to the type changes were found and corrected.
1203 * Corrected the handling of TCP sequence numbers in the TCP stack.
1214 NuttX-5.1
1215 ---------
1222 This release adds support for the SAM3U-EK development board with
1228 NuttX-5.1 includes the basic port for the SAM3U-EK board. This
1229 release passes the NuttX OS test and is proven to have a valid
1230 OS implementation. It supports the basic boot-up, serial console
1231 and timer interrupts. A configuration to support the NuttShell
1234 The extended port will also include support for SDIO-based SD
1244 That port, unfortunately has stalled due to tools issues. Those
1246 basic port will be available in NuttX-5.2.
1248 The extended release will follow and should include SDIO-based
1254 NuttX-5.2
1255 ---------
1261 This basic port includes basic boot-up, serial console, and timer
1265 An extended release will follow and should include SDIO-based SD
1268 NuttX-5.3
1269 ---------
1274 * A basic port for the NXP LPC2378 MCU on the Olimex-LPC2378
1277 And extensions to two existing architectures:
1279 * David Hewson contributed a dual-speed (full/high) USB device-side
1288 * An important fix to the USB mass storage driver was contributed
1292 NuttX-5.4
1293 ---------
1296 important extension to th NX graphics system (See
1301 directly converts the memory content to video. However, most MCUs
1305 This release of NuttX extends NX so that now renders directly to
1306 the LCD device via its serial or parallel interface. No in-memory
1311 extensions plus a driver for the HX8347, 16-bit parallel LCD. This
1312 LCD supports 16-bit RGB (5:6:5).
1314 NuttX-5.5
1315 ---------
1320 * NuttX was ported to the Luminary/TI LM3S6965 Ethernet Evaluation
1326 on porting the NuttX window system (NX) to work with the
1331 verified because I haven't properly connected it to hardware
1334 * The Olimex STR-P711 NuttX port was extended to support the
1336 The ENC28J60 has not been tested on the STR-P711, however,
1341 Along the way, external interrupt support (XTI) was added to
1342 the STMicro STR-P711 port and some important bugs were fixed
1343 in the STR-P711 SPI driver.
1352 NuttX-5.6
1353 ---------
1358 * This port adds support for the RiT displays P14201 4-bpp,
1359 greyscale OLED. 4-bpp greyscale support was integrated into
1360 the NX graphics sub-system and verified using the TI/Luminary
1366 LPC313x port. The I2C interface definition was extended to
1370 As well as a few, important USB-related bugfixes (See the ChangeLog
1374 LPC1768 MCU. However, it is too early for that port to be useful
1378 NuttX-5.7
1379 ---------
1382 for one new ARM Cortex-M3 architecture:
1385 2G board from 2G Engineering (http://www.2g-eng.com).
1397 (2) SPI-based MMC/SD support
1401 NuttX-5.8.
1403 NuttX-5.8
1404 ---------
1412 Power was not being provided to the GPIO module!
1428 One to support the USB serial device and one for the USB mass
1434 to join into multicast groups. Outbound traffic to enter and
1439 NuttX-5.9
1440 ---------
1442 This is the 56th release of NuttX. This release is difficult to
1443 categorize; NuttX-5.9 was really released because there were too
1444 many changes accumulating in CVS -- a few important, some unfinished
1448 of on-demand paging support. This feature will allow you to
1450 FLASH) in a small RAM. All of the core on-demand paging logic
1452 and support was implemented for the ARM-9 family. A test
1455 fixed-page ARM9 operation, but otherwise this new on-demand
1457 * Add support for the CodeSourcery toolchain to the Olimex-lpc2378
1459 * The Neuros OSD port has been updated to work with the production
1466 * NXP LPC17xx - Fixed a critical bug in the GPIO configuration
1467 logic: When attempting to set no pull-up or pull-down (floating),
1468 it would, instead, select pull-down.
1470 * TI/Luminary LM3Sxxxx - Fixed:
1472 (2) GPIO port encoding the limited support to only 8 GPIO ports.
1480 NuttX-5.10
1481 ----------
1492 * On-Demand Paging Support:
1493 The basic logic for the On-Demand Paging feature is complete,
1496 test infrastructure will be needed in order to complete the
1501 object is linked with the NuttX libraries to produce the final
1503 only used to support the On-Demand paging feature: The first
1505 the second pass builds the NuttX executable more-or-less as
1510 CONFIG_EXAMPLE. CONFIG_EXAMPLE used to identify the sub-directory
1512 application to be built. That made it awkward to configure to
1514 directory. CONFIG_APP_DIR is more general; it can be used to
1515 refer to any directory containing the application to be built.
1518 you will need to make a couple of changes:
1520 - Replace all occurrences of CONFIG_EXAMPLE=foobar with
1523 - Replace any occurrences of examples/$(CONFIG_EXAMPLE) with
1525 - Replace any occurrences of lib$(CONFIG_EXAMPLE)$(LIBEXT)
1527 - Check any other occurrences of CONFIG_EXAMPLE.
1529 * Several bugfixes are included as well as code changes to eliminate
1532 NuttX-5.11
1533 ----------
1541 * Corrections to lm3s8962 port contributed by Larry Arnold. That
1542 port is purported to work correctly with these changes in place.
1547 * A new configuration to support the mbed.org LPC1768 board.
1551 NuttX-5.12
1552 ----------
1557 Essentially, interrupts are re-enabled while the signal handler
1558 executes, but the logic to re-disable the interrupts before
1563 ARM to Cortex-M3, AVR32, M16C, SH1, ZNEO, eZ80, Z8, and Z80 --
1567 Other notable changes in NuttX-5.12:
1571 release was made before verifying this port in order to get the
1577 NuttX-5.13
1578 ----------
1591 bumped by the Olimex LPC1766-STK port -- see below)
1595 and functional, but I am not yet able to demonstrate that. At
1601 devices -- like SPI and USB --- and will be available in a
1604 * LPC1766, Olimex LPC1766-STK
1606 Support for the Olimex-LPC1766 is newly added to NuttX and is
1611 they have not yet been verified. Goals for NuttX-5.14 include:
1617 NuttX-5.14
1618 ----------
1620 The 61st release of NuttX, NuttX-5.14, was made on November 27,
1628 * Cortex-M3 Hard Fault. Fixed a hard fault problem that can occur
1632 Ethernet interrupt). However, it is assumed that all Cortex-M3
1635 * TCP/IP Sequence Number Bug. Corrected errors some important
1643 (and with no re-transmission requests). This was due to
1648 * One-Shot POSIX Timer Bug. Fixed an error in set-up of a one-shot
1650 is zero in the one-shot case), always resulting in a 10Ms timer!
1653 Additional support has been included for the Olimex-LPC1766. Support
1654 for that board was added to NuttX 5.13. This release extends that
1660 for NuttX-5.15 (and beyond) include: (1) Verified USB support, (2)
1663 NuttX-5.15
1664 ----------
1666 The 62nd release of NuttX, NuttX-5.15, was made on December 12,
1668 enhancements, primarily for the Olimex LPC1766-STK board.
1672 * Additional fixes needed with the TCP sequence number problem
1673 "fixed" in NuttX-5.14.
1678 * All USB class drivers need to call DEV_CONNECT() when they are
1679 ready to be enumerated. That is, (1) initially when bound to
1688 Ethernet packet buffers (16K). An option was added to limit
1689 the amount of SRAM used for packet buffering and to re-use any
1693 LPC1766-STK NuttShell (NSH) configuration.
1696 * Added an optional cmddata() method to the SPI interface. Some
1697 devices require an additional out-of-band bit to specify if the
1698 next word sent to the device is a command or data. The cmddata
1703 an NX graphics configuration for the Olimex LPC1766-STK have
1707 NuttX-5.16
1708 ----------
1713 USB host infrastructure is new to NuttX. This initial USB host release
1720 6.3.9 USB Host-Side Drivers
1721 * include/nuttx/usb/usbhost.h. All structures and APIs needed to
1722 work with USB host-side drivers are provided in this header
1735 in order add its interface to the registry. Later, when a USB
1737 USB host class driver that is needed to support the connected
1742 device controller supports two methods that are used to detect
1746 Wait for a device to be connected or disconnected.
1751 descriptor, (3) call usbhost_findclass() to find the class
1753 the struct usbhost_registry_s interface to get a class instance,
1757 * Binding USB Host-Side Drivers. USB host-side controller drivers
1759 bound to another, higher level USB host class driver. The class
1762 on-board devices. For example, the USB host mass storage class
1765 be used to mount a file system just as with any other other
1771 initialization in order to makes itself available in the
1776 (1) calls the USB host controller driver's wait() to detect
1778 controller driver's enumerate method to bind the registered
1779 USB host class driver to the USB host controller driver.
1782 in the file configs/olimex-lpc1766stk/src/up_nsh.c.
1785 NuttX driver under the /dev directory. To repeat the above
1789 used to mount a file system just as with any other other
1790 block driver instance. Examples: See the call to
1794 NuttX-5.17
1795 ----------
1802 * The LPC17xx USB host controller driver was extended to (1) add
1803 support for low-speed devices, (2) handle multiple concurrent
1808 a standard USB keyboard to NuttX and receive keyboard input for
1813 NuttX-5.18
1814 ----------
1819 release is made primarily to keep the release tarball in synchronization
1823 * Incorporate several important uIP patches -- including the well
1824 known patch to handle missing SYNACK.
1826 not yet begun due to toolchain issues. Added support for the
1832 * USB host support expanded to handle vendor specific USB devices.
1836 NuttX-5.19
1837 ----------
1850 for applications using NuttX to have a highly customized
1851 initialization process. It supports a set of end-user applications
1854 of it this way: In a buckled-up embedded application, your
1855 end-user programs will probably have their own dedicated start-up
1856 logic. But, during development, you might want to have you
1858 This apps/ add-on (and NSH hooks) was contributed by Uros to
1860 * NSH was also extended to support application specific ROMFS
1861 /etc/init.d/rcS start-up scripts. This feature, as well, as
1862 all of the above-mentioned apps/ directory support was contributed
1867 driver should support point-to-point network communications to
1868 a host using TCP/IP or UDP. This driver is code complete, but
1872 * Cortex-M3 Power improvements: Waits for Interrupt (WFI) in idle
1873 loop for reduced power consumption (LPC17xx and STM32 only -
1878 NuttX-6.0
1879 ---------
1883 version number of this release was bumped from 5.19 to 6.0. A
1884 change in the major revision number is used to reflect an incompatibility
1886 functionality has been separated from NuttX application-related
1889 * nuttx-6.0.tar.gz, and
1890 * apps-6.0.tar.gz
1892 The purpose of this separation is both to better organize and
1893 modularize the NuttX source tree, but also to provide better support
1894 for incorporation of end-user applications with Nuttx.
1896 The incompatibility results from the changes to the board configuration
1897 logic needed to supported the separable application. The major
1898 changes to the configuration include:
1900 * CONFIG_APPS_DIR - This should not be set. The default is
1902 product-specific application directory in some different location.
1904 * appconfig - Each board configuration now requires a new file
1908 In addition to this major reorganization in the directory structure,
1909 this release also includes some important extensions to existing
1913 re-designed. Now you can have an Ethernet connection to you
1917 to work on the Bifferboard (see http://bifferos.bizhat.com/).
1919 * And extensions to the uIP driver interface, and
1921 * Bug fixes to fopen() and STM32 GPIO configuration
1925 NuttX-6.1
1926 ---------
1930 6.0 release introduced a detach-able application environment to
1932 purpose of this release is to correct numerous build problems
1937 by Rafael Noronha was incorporated and is reported to fix those
1939 * The apps/ directory build system would not handle Windows-native
1940 toolchains due to obscure path formatting issues.
1948 in kernel-mode. This provides a secure environment for NuttX. This
1949 feature is fully coded in NuttX-6.1, but has not been tested due
1950 to higher priority tasks that have arisen.
1952 Related to this change, support for the Cortex-M3 memory protection
1953 unit (MPU) has been integrated with the NuttX kernel build to provide
1965 lets named applications to be viewed and accessed in NSH under
1967 * An I2C-based driver for the LIS331DL MEMS motion sensor.
1973 8-bit types (int8_t), and USB serial device. See the ChangeLog for
1976 NuttX-6.2
1977 ---------
1983 * NXFFS: The obvious new feature is NXFFS, the NuttX wear-leveling
1984 FLASH file system. This new file system is intended to be
1993 * Support for the Univision UG-9664HSWAG01 OLED with Solomon
1999 In addition to these new feature, several important bugfixes are
2004 NuttX-6.3
2005 ---------
2009 back-to-back release was made so that the current released version
2010 of NuttX will correspond to the initial release from the RGMP
2015 on multi-processor platforms. See
2025 NuttX-6.4
2026 ---------
2032 * A new, full-featured FTP client. This client may be used as a library
2037 the NXP LPC17xx to demonstrate this functionality.
2039 * A PCI-based E1000 Ethernet driver (contributed by Yu Qiang)
2044 buffered C functions to be used for network communications.
2045 * The NSH ifconfig command can now be used to set or change the
2050 * The MicroChip PIC32MX port is now code complete and ready to
2051 begin testing. Unfortunately, testing will be delayed due to
2055 Additional miscellaneous enhancements and bug fixes to task_delete(),
2058 NuttX-6.5
2059 ---------
2063 6.5 release is all about support for the Atmel 8-bit AVR family.
2076 incomplete areas and a few caveats that need to be stated. Here
2077 they are, ordered from the least to the most complete:
2081 This port of NuttX to the Amber Web Server from SoC Robotics
2082 (http://www.soc-robotics.com/index.htm). Is only partially in
2086 STATUS: Work on this port has stalled due to toolchain issues. It
2091 This port of NuttX to the Opendous Micropendous 3 board. The
2097 STATUS: The basic port was released in NuttX-6.5. This basic
2105 This is a port of NuttX to the PJRC Teensy++ 2.0 board. This
2108 of FLASH and 8K of SRAM; a little more room to move than the
2111 STATUS: The basic port was released in NuttX-6.5. This basic
2118 configuration is not fully debugged as of the NuttX-6.5 release.
2120 AVR-specific issues. The basic AVR port is solid and biggest issue
2122 Because of the Harvard architecture, constant data that resides to
2128 Most NuttX test applications are console-oriented with lots of
2130 stored in SRAM now due to these data accessing issues and even the
2131 smallest console-oriented applications can quickly fill a 4-8K
2132 memory. So, in order for the AVR port to be useful, one of two
2133 things would need to be done:
2139 2. Create a special version of printf that knows how to access
2142 NuttX-6.6
2143 ---------
2152 * Fixed several NX Graphics bugs: Rendering fonts at >8 bits-per-pixel,
2155 * Corrections to the USB host mass storage class driver
2158 * Corrections to the Teensy AT90USB SD driver
2159 * Changes for a clean compilation under the ZDS-II toolchain.
2163 * Add logic to extract printf strings from FLASH (but there are
2168 * Added several new configurations for the STMicro STM3210E-EVAL
2170 * Added support for the STM3210E-EVAL board: (1) LCD in either
2172 * Added a configuration option to use different serial ports for
2174 with CR-LF expansion and character echo if NSH is not run on
2179 the background while pop-up windows occur. Text should continue
2180 to update normally with or without the popup windows present.
2185 NuttX-6.7
2186 ---------
2190 that release consists of two tarballs: nuttx-6.7.tar.gz and
2191 apps-6.7.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2199 and disconnected when not needed (or re-connected as a different
2203 * NX Fonts: Add support for multiple fonts; developed a tool to
2206 * NX Graphics: Add new NX APIs to support drawing of wide lines
2207 in any orientation. Added new low level routines to set
2213 * STM32: New NX-related configurations to exercise text and
2221 NuttX-6.8
2222 ---------
2226 that release consists of two tarballs: nuttx-6.8.tar.gz and
2227 apps-6.8.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2231 * NuttX has been ported to run on the Freescale Cortex-M4 "Kinetis"
2233 KwikStik-K40 and (2) the Kinetis TWR-K60N512 tower.
2236 * LPC17xx CAN driver extended to support both CAN1 and CAN2
2238 * Fixed several critical bugs related to signal handling
2240 to send or receive message queues.Both are important. (submitted
2249 NuttX-6.9
2250 ---------
2254 that release consists of two tarballs: nuttx-6.9.tar.gz and
2255 apps-6.9.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2261 * Analog Support/ NXP LPC17xx: New DAC sub-system including ADC and DAC
2262 drivers for the LPC17xx. Extensions to the ADS1255 driver.
2265 * Power Management: Added a new NuttX power management sub-system for
2269 * I2C Test Tool: A new application was added that can be used to
2273 * NuttShell (NSH): In addition to the I2C test tool, a date command
2274 is now supported (if CONFIG_RTC is defined) that can be used to
2280 * Kinetis Cortex-M4: Added a SDHC driver for the Kinetis parts.
2282 do to some higher priority tasks that forced me to stop work.
2284 * Other new drivers: Driver for I2C-based at24cxx EEPROM submitted by
2285 Li Zhuoyi (Lzyy); Driver for the LM-75 temperature sensor. Support
2286 for the LM-75 temperature sensor integrated into the SM3210E-EVAL
2292 * FLASH: Added a function that accepts the path to a block driver and
2295 * Build System: The Make export logic now also tries to track down all
2296 architecture-specific header files and include these in the NuttX
2302 * STM32 I2C Driver: Add resets, timeout, and other fixes to work
2309 * C Library: Fixed errors in gmtime() and gmtime_r() that could lead to
2313 only config CONFIG_RTC is enabled
2315 * Build System: Use of -print-libgcc-file-name to get path to
2319 NuttX-6.10
2320 ----------
2324 that release consists of two tarballs: nuttx-6.10.tar.gz and
2325 apps-6.10.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2333 * CDC ACM serial class device-side driver
2335 * RTC: Now supports hi-res and lo-res hardware RTC. The lo-res RTC
2341 * ADS7843E touchscreen driver. As used on the SAM3U-EK development
2344 * AT91SAM3U SPI driver. To support the ADS7843E toucscreen
2350 * System Timer. Added support for a 64-bit system timer.
2355 * LCD Support. Added a test to verify that we read and write correct
2356 to LCD GRAM memory.
2358 * I2C tool. Extended to support to include a verify command and
2359 repititions and auto-address increment for most commands.
2362 USB serial terminal to a host UART serial terminal.
2385 NuttX-6.11
2386 ----------
2390 that release consists of two tarballs: nuttx-6.11.tar.gz and
2391 apps-6.11.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2399 * NX Graphics: New interfaces to read from graphics memory
2401 to achieve a larger, more usable block size for NXFFS.
2423 NuttX-6.12
2424 ----------
2428 that release consists of two tarballs: nuttx-6.12.tar.gz and
2429 apps-6.12.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2437 verified for the STMicro STM3250G-EVAL board.
2439 * SDIO-Based SD Card support. Add support for large (>4Gb) devices
2450 * C Library. wchar_t is a built-in type for C++
2452 NuttX-6.13
2453 ----------
2457 that release consists of two tarballs: nuttx-6.13.tar.gz and
2458 apps-6.13.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2466 "upper half" PWM driver. Updated the MP25x driver to support
2471 * STM32 Boards. Added STM3240G-EVAL DHPCD and nettest configuration.
2472 Support for a new STM32 board, the HY-Mini STM32v board, was
2474 * PIC32. The port to the Microchip PIC32MX is finally functional and
2477 * Tests: New re-usable tests (in apps/examples) for PWM, ADC, and
2478 CAN loopback. Several existing tests can now be built as NSH built-in
2490 NuttX-6.14
2491 ----------
2495 that release consists of two tarballs: nuttx-6.14.tar.gz and
2496 apps-6.14.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2503 * Drivers. The upper-half PWM driver will now support a pulse count (as
2504 would be needed to control a stepper motor).
2507 support for the STM32 F4. Add support for UART4-5 and USART6
2509 count for TIM1 and TIM8. Timer driver now supports the F4's 32-bit
2512 * STM32F4Discovery. Support for the STM32F4-Discovery board contributed
2515 * STM3240G-EVAL. Add support for user control of LEDs.
2517 * LPC17xx. Add support for loopback mode to CAN driver. CAN TX done
2521 * LPC1766-STK. Add support for on-board buttons. Add support for user
2524 * LM3S. Add support for the LM3S6432S2E on the TI RDK-S2E (Contributed
2527 * PIC32MX. USB device-side driver (needs further testing). A partial
2533 * Build. New targets apps_clean and apps_distclean to simplify working
2538 * Drivers. Fixed a buffer-full test in the upper-half CAN driver.
2547 * FAT. Now returns the correct error value when it is unable to
2554 NuttX-6.15
2555 ----------
2559 that release consists of two tarballs: nuttx-6.15.tar.gz and
2560 apps-6.15.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2567 * General Drivers: Add support for (29-bit) extended CAN IDs. Add an
2568 infrastructure to support battery drivers. Add a driver for MAX17040x
2574 Added the new command 'dmesg' to NSH that can be used to dump the
2588 * STM32 Drivers. PWM driver pulse count was limited to 128; now is
2589 (essentially) unlimited. Add support for (29-bit) extended CAN IDs.
2595 (29-bit) extended CAN IDs.
2604 tcgetattr(). Moved the old, too-smart fgets() to a new application
2607 Add support to enable or disable debug output.
2609 * Build system: Support for building a 32-bit simulation executable on
2610 a 64-bit Linux machine. Correct a dependency issue in the arch/*/src/board
2624 * NSH. Wait for a USB connection if a USB serial class is used to
2630 NuttX-6.16
2631 ----------
2635 that release consists of two tarballs: nuttx-6.16.tar.gz and
2636 apps-6.16.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2643 * ARMv7M Support: Includes new, streamlined Cortex-M exception
2645 Cortex-M4 FPU registers is now provided (in both "lazy" and "non-lazy"
2653 Verified the STM32 F4 DMA driver; Added F4 DMA support to the existing
2657 for the STM3220G-EVAL board (contributed by Gary Teravskis).
2660 STM3240G-EVAL board.
2666 * Networking. Added a lower-level, thread-independent socket layer.
2667 Parts of this layer were created in 6.15 to support the FTPD
2669 to support an NFS file system (not yet released).
2679 * Networking: Fixed a "leak" in the TCP/IP read-ahead buffering logic.
2680 Corrected an error in TCP/IP sequence numbering/ACK logic which
2681 occurred when read-ahead buffering memory is exhausted.
2689 * Networking: Corrected recv()/recvfrom() return value. Added logic to
2692 logic to select() to correctly handle POLLHUP (Contributed by Max
2698 NuttX-6.17
2699 ----------
2703 that release consists of two tarballs: nuttx-6.17.tar.gz and
2704 apps-6.17.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2711 * Networking: Additional low-level, thread-independent socket
2716 system re-awakens from certain deep-sleep modes.
2719 wraps an NX window and can be re-directed for stdout. This allows,
2720 for example, a pop-up graphics window that contains a NuttShell (NSH)
2724 driver to support watchdog timers.
2726 * Calypso: Support for TI Calypso-based cellphones (as supported by
2727 the Osmocom-BB project) was contributed by members of the Osmocom-BB
2730 * USB Device Interface: Needed to extend the USB device interface
2732 may need to accompany a setup request.
2736 and partially verified (this driver seems to be functional but since
2743 * PIC32 boards: Added support for the Sure DB-DP11212 PIC32 General
2748 The goal is to move any non-standard header files to include/nuttx
2749 or include/arch. Moved include/math.h to include/nuttx/math.h;
2764 kconfig-frontends tool is being incorporated into the build
2777 the file is opened write-only.
2780 multi-user NX server because of lack of use.
2782 * STM32: In order to use CAN2, both CAN1 and CAN2 clocking must be
2789 * Build System: Reordered the link command line to account for new
2793 NuttX-6.18
2794 ----------
2798 that release consists of two tarballs: nuttx-6.18.tar.gz and
2799 apps-6.18.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2816 DMA to improve Rx performance (Contributed by Mike Smith).
2818 * STM3240G-EVAL Board. Add support for the LCD and for the STMPE811
2825 Numerous other extensions needed to support NxWM (see the ChangeLog
2828 * Library. Add prctl() command that can be used to setting and getting
2830 fixes) are part of a larger effort to improve task monitoring
2841 kconfig-frontends tool is being incorporated into the build
2869 need to return non-zero values on success.
2871 * graphics: Many multi-use mode fixes added to support NxWM (see the
2872 ChangeLog for details). Auto-raise is temporarily disabled in multi-
2877 NuttX-6.19
2878 ----------
2882 that release consists of two tarballs: nuttx-6.19.tar.gz and
2883 apps-6.19.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2889 This feature allows a tiny, embedded MCU to mount a remote file system
2890 exported by an NFS server and then to access the file system as it would
2901 nfsmount <server-address> <mount-point> <remote-path>
2903 That command will mount the remote NFS server directory <remote-path> at
2904 <mount-point> on the target machine. <server-address> is the IP address of
2910 do and getting the target resource usage to a bare minimum. Only around a
2911 kilobyte or so of memory is required to run the NFS client (and most of that
2923 The STM3220G-EVAL board support is now equivalent to the STM3240G-EVAL
2933 * apps/: Add the capability to use an arbitrary USB device as the console
2941 kconfig-frontends tool is being incorporated into the build
2959 NuttX-6.20
2960 ----------
2964 that release consists of two tarballs: nuttx-6.20.tar.gz and
2965 apps-6.20.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2975 system which will automatically drive the system to lower power
2976 usage states due to lack of use.
2978 * Drivers: Added a driver for the SST 25 SPI-based FLASH parts.
2985 * PIC32 boards: Added support for the DTX1-4000L "Mirtoo" module
2988 * NXP LPC43XX Boards: Added support for NGX LPC4330-Xplorer board.
2993 * LM3S Boards: Add a configuration to support the TI/Stellaris
2994 EKK-LM3S3B96 development board. Contributed by Jose Pablo Rojas V.
2996 * Library: NuttX now supports platform-specific stdarg.h header
3003 kconfig-frontends tool is being incorporated into the build
3014 * LM3S: Fixed an optimization related but that caused slow start-up
3022 NuttX-6.21
3023 ----------
3027 that release consists of two tarballs: nuttx-6.21.tar.gz and
3028 apps-6.21.tar.gz. Both may be needed (see the top-level nuttx/README.txt
3038 * Drivers: Added support for the TI PGA112-7 amplifier/multiplexor.
3039 * LPC43xx: Added clock ramp-up logic to run at 204 MHz
3040 * LPC43xx Drivers: SPIFI block driver, RS-485 support, Minimal termios
3050 Add support for the Olimex STM32-P107 (contributed by Max Holtzberg).
3057 * Applications: Port of freemodbus-v1.5.0. Add support for testing
3065 (Thanks go to Richard Cochran).
3066 * Documentation: Document ways to customize the behavior of NSH.
3075 * STM32: Pinmap fixes, SPI driver re-initialization
3078 * PM: Fix a place where interrupts were not be re-enabled.
3079 * Applications: NSH application start-up race conditions.
3086 NuttX-6.22
3087 ----------
3091 that release consists of two tarballs: nuttx-6.22.tar.gz and
3092 apps-6.22.tar.gz. Both may be needed (see the top-level nuttx/README.txt
3099 r5206 should equivalent to release 6.22 of NuttX 6.22:
3101 svn checkout -r5206 svn://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
3105 svn checkout -r5206 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
3114 * Memory Management: Added a new granule-based allocated that can be
3115 used to manage, aligned and quantized DMA memory.
3117 * File System: Add hooks to allocate I/O memory with and external
3122 * Drivers: Add hooks USB device drivers to allocate I/O memory with and
3127 * ARMv7-M: Added logic to reset the MCU using the NVIC.
3131 * STM32 Drivers: Add logic to re-initialize UARTs a second time to
3134 * STM32 boards: Support for USB host added add to several configurations
3139 * Build System: Kconfig string de-quoting logic. Remove comments from
3140 defconfig files (Kate). Add tool to create NuttX-style symbol tables.
3141 Numerous changes to configuration logic as needed for the new mconf-based
3143 Make.defs logic into tools/Config.mk (Richard Cochran).
3146 Add %n format to sscanf() (Kate).
3148 * Applications: Numerous changes and extensions to the old uIP web server
3151 …XML-RPC Server (http://www.drdobbs.com/web-development/an-embeddable-lightweight-xml-rpc-server/18…
3156 * RTOS: Fixes to priority inheritance logic (*critical*). waitpid()
3159 * FAT File System: Improper Boolean expression caused un-necessary writes
3162 * Networking: Remove an un-necessary delay from recvfrom(). This greatly
3167 * Drivers: Fix double release of memory in SDIO-based, MMC/SD driver
3178 Ethernet buffer alignment check. Add "kludge" to Ethernet driver to
3186 Vainish). Fix some field-width handling issues in sscanf()
3190 NuttX-6.23
3191 ----------
3195 that release consists of two tarballs: nuttx-6.23.tar.gz and
3196 apps-6.23.tar.gz. Both may be needed (see the top-level nuttx/README.txt
3203 r5313 should equivalent to release 6.23 of NuttX 6.23:
3205 svn checkout -r5313 svn://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
3209 svn checkout -r5313 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
3213 * RTOS: If both atexit() and on_exit() are enabled, use on_exit() to
3227 * C Library: Support is now included for the add-on uClibc++ C++
3229 STL, RTTI, exceptions -- the complete C++ environment. (uClibc++ is
3230 provided as a separate add-on package due to licensing issues).
3232 Optimized generic and ARM-specific memcpy() function. Optimized
3243 (Darcy Gong). Enancements to NSH ping command to support pinging hosts
3244 with very long round-trip times. Extensions to the ifconfig command
3247 Many extensions to the webclient/wget and DNS resolver logic from Darcy
3268 NuttX-6.24
3269 ----------
3273 that release consists of two tarballs: nuttx-6.24.tar.gz and
3274 apps-6.24.tar.gz. Both may be needed (see the top-level nuttx/README.txt
3281 SVN. Revision r5447 should equivalent to release 6.24 of NuttX 6.24:
3283 svn checkout -r5447 svn://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
3287 svn checkout -r5447 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
3293 - Implemented the POSIX pause() function (still has some compiance
3295 - Tasking logic is extended to support the notion of address
3298 (by binfmt), the OS will propogate that environment to child threads
3300 - If support for the PATH variable is enabled, the OS start up logic
3307 - The NuttX binary loaders have been updated to support the PATH
3310 feature is added to support more standard behavior (eventually, NSH
3313 - The NXFLAT and ELF binary loaders have been extended to create
3319 * Drivers: LCD driver for the Univision UG-2864AMBAG01 OLED
3324 * STM32 Drivers: Added optional RS-485 direction bit control (from
3329 - Support for generic STM32F100RC board contributed by Freddie Chopin.
3330 - stm32f4discovery/nxlines: STM32F4Discovery support for the
3331 UG-2864AMBAG01 OLED.
3332 - stm32f4discovery/winbuild: A version of the NuttX OS test
3333 configured to build natively on Windows.
3334 - stm32f4discovery/elf: Now uses the PATH variable to find ELF
3336 - configs/cloudctrl: Added for Darcy Gong's CloudController board
3345 - Add support for the z180 chip family and, specifically, for
3347 - All ZiLOG configurations updated to use the current ZDS-II
3352 - Add a semaphore handshake so that operations on buffers from
3355 - nxtk_subwindowmove() and nxtk_getwindow(): Improvements to clipping
3358 * C Library: lib/ sub-directory renamed libc/ (there is a new lib/ sub-
3359 directory that is used to hold all archives).
3365 - Add NSH hexdump command to dump the contents of a file (or character
3366 device) to the console (contributed by Petteri Aimonen).
3367 - Extend the NSH ifconfig command plus various DHCPC improvements
3372 - ostest: Replace large tables with algorithmic prime number
3373 generation. This allows the roundrobin test to run on platforms
3375 - keypadtest: A new keypad test example contributed by Denis Carikli.
3376 - elf and nxflat: If CONFIG_BINFMT_EXEPATH is defined, these examples
3377 will now use a relative path to the program and expect the binfmt/
3378 logic to find the absolute path to the program using the PATH
3383 - New top-level Makefiles: Makefile.unix and Makefile.win (along with
3384 numerous changes to other make-related files). This adds basic
3386 window (rather than in a POSIX-like environment). This build: (1)
3392 and (2) still lacks some of the creature-comforts of the more
3396 - Example Windows native builds for STM32F4Discovery, eZ80, z16f, z8,
3398 - Several configurations have been converted to work the kconfig-
3401 - Architectures now include a common Toolchain.defs file that can be
3402 used to manage toolchains in a more configurable way (most of this
3407 - Renamed tools/winlink.sh to tools/copydir.sh.
3408 - Several new tools/scripts to support the Windows native build:
3411 - tools/incdir.sh and incdir.bat now support an -s option to generate
3413 - tools/b16.c: Fixed precision math conversion utility.
3430 - Qencoder driver and TIM3 driver fixes from Ryan Sundberg.
3431 - Fix timeout delay calculation in the STM32 OTG FS host driver.
3434 driver is un-initialized.
3438 - Fix logic when the mouse drags outside of the window; fix
3440 - nxtk_filltrapwindow(): Correct an offset problem (also from Peterri
3442 - nxglib_splitline(): Correct the "fat flat line" bug.
3446 - nrand() changes to prevent coefficients from becoming zero which
3448 - Add rounding functions to the math library (contributed by Petteri
3451 * Build system: Changes to MIN definitions in all limit.h header files
3452 to avoid integer overflows. For example from (-128) to (-127 - 1)
3459 NuttX-6.25
3460 ----------
3464 that release consists of two tarballs: nuttx-6.25.tar.gz and
3465 apps-6.25.tar.gz. Both may be needed (see the top-level nuttx/README.txt
3472 SVN. Revision r5595 should equivalent to release 6.25 of NuttX:
3474 svn checkout -r5595 svn://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
3478 svn checkout -r5595 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
3484 - Removed support for CONFIG_BUILTIN_APP_START. This is not really a
3490 - Implement a simple vfork(). In NuttX-6.25, this interface is
3491 available only for ARM7/9, ARMv7-M (Cortext-M3/4), and MIPS32
3493 - exec() now sets the priority of the new task to the same priority as
3495 - New, partially complient implementations of execv() and execl().
3498 - Add a complete implementation of posix_spawn(). This standard
3499 interface is a better match for an MMU-less architecture than are
3501 - Add a task start hook that will be called before the task main
3502 is started. This can be used, for example, to schedule C++
3503 static constructors to run automatically in the context of the
3508 - Repartitioned tasking data structures. All shared resources are now
3511 - Added support for remember the parent "task group" when a new task is
3513 - Added optional support to record the membership of each thread in
3515 - Implement support for retaining child task status in the "task group"
3519 - Add internal logic to "reparent" a task. This is useful,
3522 to be reparented for the eventual child thread.
3523 - Added support for SIGCHLD. Sent to all members of the parent task
3525 - If SIGCHLD and retention of child task exist status are enabled, then
3526 a more spec-compliant version of waitpid() is enabled.
3527 - New interfaces waitid() and wait() are also enabled when SIGCHLD
3532 - dup() and dup2() can new be used with opened files in a mounted file
3533 system. This supports re-direction of output in NSH to files.
3534 - The binfs file system was moved from apps/builtin to fs/binfs. The
3535 binfs file system was extended to support execution of "builtin
3537 - Added logic based on SIGCHLD to automatically unload and clean-up
3542 - Much of the logic for "builtin applications" was moved from
3543 apps/builtin to nuttx/binfmt/libbuiltin. Includes some extensions
3545 - A binary loader was added for builtin applications to support
3551 - Added logic to marshal and serialized "out-of-band" keyboard
3557 - Driver for the UG-2864HSWEG01 OLED contributed by Darcy Gong.
3558 - Add support for removable serial devices (like USB serial). This
3561 * ARMv7-M:
3563 - Added an option to use the BASEPRI register to disable interrupts
3565 that interfere with some debug tools. You need to switch to the
3570 - Bring STM32 F1 DMA capabilities up to par with the STM32 F2/F4
3572 - Add support for USART single wire mode (Contributed by the PX4
3574 - Updates to support for SPI DMA on the STM32 F1/F2/F4. From
3579 - New configuration to support the UG-2864HSWEG01 OLED on the
3581 - Added a posix_spawn() test configuration for the STM32F4Discovery.
3585 - Files and directories repartitioned to support both LM3S and LM4F
3587 - Partial definitions for the LM4F contributed by Jose Pablo Carballo
3592 - Added scripts and documentation to use OpenOCD with the LM3S (from
3597 - Files and directories repartitioned to support both LPC175x/LPC176x
3603 - Added a configuration to support the Wave Share Open1788 board.
3608 - Add basic support for the The0.net ZP213x/4xPA board (with the LPC2148
3610 - Add an nxlines configuration for the ZP213x/4xPA (with the LPC2148
3615 - Add an nxlines configuration for the simulator.
3619 - Add logic to work around delayed ACKs by splitting packets
3621 - Split net_poll() to create the internal interface psock_poll().
3625 - Added support for LCD1602 alphanumeric LCD (HD4468OU controller).
3629 - Added 5x8 monospace font. This tiny font is useful for graph
3635 - Add an options to better manage toolchain prefixes.
3636 - Redesigned how the context targer works in the apps/ directory.
3638 because there is no easy way to get the system to rebuild the
3644 - There are several new configurations that use the kconfig-frontends
3645 tools and several older configurations that have been converted to
3646 use these tools. There is still a long way to go before the conversion
3651 configs/stm3220g-eval/nxwm
3653 configs/olimex-lpc1766stk/nsh
3654 configs/olimex-lpc1766stk/hidkbd
3655 configs/olimex-lpc1766stk/nettest
3659 configs/lm326965-ek (all configurations)
3660 configs/mcu123-214x/nsh
3665 - tools/kconfig.bat: Kludge to run kconfig-frontends from a DOS shell.
3666 - tools/configure.c: configure.c can be used to build a work-alike
3667 program as a replacement for configure.sh. This work-alike
3670 - tools/configure.bat: configure.bat is a small Windows batch
3675 to build it first.
3679 - New and modified examples:
3681 apps/examples/wlan: Remove non-functional example.
3683 handler test to catch death-of-child signals (SIGCHLD). Add a
3687 - NSH:
3689 NSH now supports re-direction of I/O to files (but still not from).
3690 The block driver source argument to the mount command is now
3698 - Supports a new daemon that can be used to monitor USB trace outpout.
3699 - Removed non-functional wlan example.
3705 - Fixed a *critical* task exit bug. Here is the failure scenario:
3707 TCB (i.e., the one at the head of the ready to run list), (2)
3709 of the ready-to-run list, then (3) sched_unlock() is called which
3711 I saw was that pre-emption got disabled in the IDLE thread, locking
3716 - sigtimedwait() would return a bad signal number if the signal was
3721 - Some SD cards will appear busy until switched to SPI mode for
3722 first time. Having a pull-up resistor on MISO may avoid this
3724 without pull-up.
3728 - STM32 FLASH driver counting error (from Freddie Chopin).
3729 - STM32 F4 maximum SPI frequency was wrong (corrected by Petteri
3734 - Due to cloning of untested code, the logic to control on-board
3736 - Serial devices number /dev/ttyS0-5 is there is a serial console,
3737 but /dev/ttyS1-6 if there is no serial console.
3741 - C++ static constructors execute now using a start taskhook
3747 - Several FAT-related bugs fixed by Petteri Aimonen.
3751 - Fix poll/select issure reported by Qiang: poll_interrupt() must call
3755 - Similar issues corrected for recvfrom() and send().
3756 - Telnetd would hang in a loop if recv() ever returned a value <= 0.
3760 - fread() could hang on certain error conditions.
3761 - Can't handle SYSLOG output to a character device from the IDLE task
3766 - Serial was driver was not being built if there is no console
3772 - sig_timedwait() and clock_time2ticks.c: Timing "rounding" logic
3773 - ARM9 Compilation issue with low vectors.
3774 - readline() return value
3775 - Others as detailed in the ChangeLog: HID keyboard, LPC17xx bit
3779 NuttX-6.26
3780 ----------
3784 that release consists of two tarballs: nuttx-6.26.tar.gz and
3785 apps-6.26.tar.gz. Both may be needed (see the top-level nuttx/README.txt
3792 SVN. Revision r5745 should equivalent to release 6.26 of NuttX:
3794 svn checkout -r5745 svn://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
3798 svn checkout -r5745 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
3804 - Add an additional call-out to support board-specific driver
3805 initialization during the boot-up phase (available with
3810 - New interface task_spawn() that is like posix_spawn(), but uses
3812 - Additional data restructuring as a continuation of the task group
3817 - TCBs for tasks and pthreads are now separate structures. This
3818 saves a little memory since tasks do not have to carry the overhead
3823 - Extensive changes were made to support the kernel build mode. In
3828 mode accesses). Access to the kernel from the user blob is only
3830 - Extensive changes were made to the syscall, SVCall, and trapping
3832 - The memory manager was extended to support both kernel- and user-
3833 mode allocations. Logic within the kernel needs to use the
3834 correct kernel- or user-space allocator, depending upon the user
3836 - The user-space blob now contains a header built in at the beginning
3838 provided by a kludgy, auto-generated header file (user_map.h).
3839 - Basic support implemented for the ARMv7-M family with fragments
3840 also implemetned for the ARMv6-M and MIPS32 families.
3841 - Kernel build supported added for the LPC17xx Open1788 and for
3842 the Atmel SAM3U-EK board. All testing is being performed on the
3847 - Delivery of signals to threads within a task group is now compatible
3848 with the way that signals are delivered to threads within a process.
3852 - Add a driver for the SST29VF NOR FLASH parts.
3853 - USB device trace/debug feature extended to decode device-specific
3854 trace events to make the trace output more readable (from Petteri
3856 - USB MSC device driver can not support names of differing sizes
3858 - Locking added to MMC/SD SPI drivers so that MMC/SD can co-exist on
3862 * ARMv6-M (Cortex-M0):
3864 - Added support for the ARM Cortex-M0 family.
3868 - Added support for the nuvoTon NUC120 MCU (Cortex-M0).
3872 - Added basic support for the nuvoTon NuTiny-SDK-NUC120 board (Cortex-M0).
3876 - Added support for the LPC177x and LPC178x families. Most of this is
3881 - Added support for Zilogic System's ARM development Kit, ZKIT-ARM-1769.
3883 - The port for the WaveShare Open1788 board is now functional. Basic
3889 - Added an SD card MSI driver for the LPC178x. The driver is marginally
3890 functional but requires DMA capability to be reliable.
3894 - Support extended to handle the STM32 F3 family (Cortex-M4 with F1-like
3899 - Added support the STMicro STM32F3Discovery board (STM32 F3).
3903 - Basic support for the LM4F120 family is in place, but untested (mostly
3908 - Add support for the LM4F120 LaunchPad (untested).
3912 - select() should now allocate a little less memory.
3916 - Extended to support multiple heaps. This is used as part of
3917 the kernel build in order to support separater user- and
3918 kernel-mode heaps.
3919 - The stand-alone memory manger test had to be removed. It
3925 - Several configurations converted to use the kconfig-frontends
3926 configuration tool. There are still many more that need to
3931 - Move the workqueue logic into the C library. There is now a
3932 special user-space version of the work queue (which will only
3934 - Implementation of itoa() contributed by Ryan Sundberg.
3938 - The NSH builtin task logic now uses task_spawn() to start builtin
3940 - The OS test now includes a test cased to verify task_restart().
3943 implemented but present in this release. Most are expected to be fully
3953 not yet fully functional due to several user resources that are not yet
3956 * Conversion of old configurations to use the kconfig-frontends
3963 - The wrong PID was being signalled with SIGCHILD. It should be
3965 the last thread to leave the task group.
3966 - Added logic so that some internal resources and states are recovered
3970 * ARMv7-M:
3972 - Several fixes to the MPU control logic.
3976 - Removable serial drivers race conditions fixed.
3977 - MAX11802 timing bug (from Petteri Aimonen).
3981 - Handle cases were SPI DMA logic fails if sem_wait is awakened
3982 by a signal. Need to clear error flags to prevent corruption of
3985 - Fixes to the OTG FS device driver from Petteri Aimonen.
3986 - Fix typos in DMA register header file (from Yan T.)
3990 - Correction to the hyphen in the SANS 17x22 font (from Petteri
3995 - Corrected errors in the socket poll/select logic. Additional
3996 state logic was needed to detect if the socket is still connected
4001 - mallinfo() should hold the memory manager semaphore (from Petteri
4006 - Resolved several build errors reported by Mike Smith.
4010 - Fixed an NSH memory leak: Needed to detach after creating each
4012 - readline() now returns EOF on any failure (instead of a negated
4014 logic similar to getc. The value zero (meaning end-of-file)
4019 NuttX-6.27
4020 ----------
4024 that release consists of two tarballs: nuttx-6.27.tar.gz and
4025 apps-6.27.tar.gz. Both may be needed (see the top-level nuttx/README.txt
4032 - Add missing registration of /dev/zero. Registration of /dev/null
4037 - Added a new interface to set aside memory on the task's stack. This
4038 is used (at least in the kernel build) to hold task arguments.
4039 - Remove up_assert_code(). One assertion routine is enough.
4043 - Extensive changes were made to support the kernel build mode. In
4048 mode accesses). Access to the kernel from the user blob is only
4050 - Kernel build configurations for the Open1788 board and for the
4052 - Changes were made to task and thread start-up routines, signal
4053 handling, data structures, ARMv7-M SVCalls, stack management
4058 - Driver for the ST7567 LCD Display Module from Univision Technology
4060 - SPI initialize functions renamed so that multiple SPI blocks can
4062 - Extended to support the RAMTRON FM25V01 device. Contributed by
4064 - Serial drivers: TIOCSERGSTRUCT ioctls now conditioned on
4067 * ARMv7-M (Cortex-M3/4):
4069 - Added support for modifiable interrupt vectors in RAM
4073 - Added kernel build support
4077 - Add kernel build support
4078 - Add support for the Kinetis L family of Cortex-M0+ MCUs. Contributed
4083 - Now holds off sleep mode in the IDLE loop is DMA is in progress
4088 - ZKIT-ARM-1769: Now supports the ST7567 LCD display module. Added
4090 - ZKIT-ARM-1769: Add support for both CAN1 and CAN2. Contributed by
4093 - Open1788: Basic support for the WaveShare Open1788 board is complete
4095 - Open1788: Integrated the LPC178x LCD driver with the WaveShare display.
4096 Touchscreen support is included, howerver, there appears to be an
4098 - Open1788: Now supports SDRAM (used to provide the LCD framebuffer).
4099 - Open 1788: Reversed sense of the IDLE LCD. It is now off when the
4105 - Added an LCD framebuffer driver for the LPC177x/8x family.
4106 - Implemented LPC17xx GPDMA support.
4107 - Integrated the LPC17xx GPDMA support into the SD card driver.
4108 - SSP driver adapted to work with the LPC178x family.
4109 - Separate LPC176x and LPC178x GPIO logic; this logic is too different
4110 to maintain in one file with conditional compilation.
4111 - Re-design of the GPIO logic for the LPC178x family by Rommel Marcelo.
4115 - Added kernel build support
4119 - Added support for kernel mode build.
4120 - Added architecure support for the STM32 F427/F437 chips. Contributed
4125 - Added a configuration to support a kernel mode build of the OS test
4130 - Added kernel build support
4131 - Added support for the 7 UARTs on the LM4F120
4135 - Added scripts and instructions to simplify use of OpenOCD with ICDI
4137 - The basic for the Stellaris LM4F120 Launchpad is complete. This
4143 - Directories where the same sources files are used to build different
4144 objects in the first and second pass kernel builds need to keep those
4150 - apps/system/ramtest: Add a simple memory test that can be built
4155 - kconfig2html is a new tool which will replace the hand-generated
4156 documentation of the NuttX configruation variables with auto-
4160 implemented but present in this release. Most are expected to be fully
4163 * A port to the Freescale Freedom KL25Z is complete but not yet stable
4164 enough. The KL25Z is a low-cost Cortex-M0+ part with 128KB of FLASH
4167 * Conversion of old configurations to use the kconfig-frontends
4170 to use the kconfig-frontends tools.
4176 - Fixed a critical bug: When there is pending C buffered output
4178 a critical point when trying to exit. Blocking at this critical
4181 to assure that exitting tasks never block after task teardown
4184 * ARMv6-M:
4186 - Fixed parameter passing for all system call inline functions with > 3
4188 - Fixed a major problem: The Cortex-M0 has no BASEPRI register but the
4189 logic of NuttX-6.26 was using it to manage interrupts. Switch to
4193 * ARMv7-M:
4195 - Corrected Correct MPU sub-region settings for unaligned regions.
4196 - In exception handling with CONFIG_NUTTX_KERNEL, need to explicitly
4198 - Fixed parameter passing for all system call inline functions with > 3
4203 - Support for O_NONBLOCK was not supported in the "upper half"
4205 - PL2303 compilation errors
4209 - Corrected typos in alternate function definitions.
4213 - Added a work-around for an ADC errata. From Chris Taglia
4214 - Only one ADC pin was configured. Need to configure all that
4219 - The FAT logic was not making a distinction between directory
4220 non-existence and file non-existence so when it you try to
4221 create a file in a non-existent directory, it would create a
4224 - Several fixes to the FAT file system from Ronen Vainish. These
4225 fixes mostly involve the logic to extend directory clusters for
4228 - mkfatfs was writing the boot code to the wrong location. From
4233 - Fixed a compilation error when socket options are are disabled.
4238 - Corrected an error in sscanf. If %n occurs in the format statement
4241 - strchr(str, '\0') should return a pointer to the end of the string,
4246 - Fix naming of NuttX target if EXEEXT is defined.
4250 - OS test: Fix timing error in non-cancelable thread test.
4251 - NSH: Correct the test of the skip input parameter. Was limiting the
4252 range to <= count. From Ken Petit.
4254 NuttX-6.28
4255 ----------
4259 that release consists of two tarballs: nuttx-6.28.tar.gz and
4260 apps-6.28.tar.gz. Both may be needed (see the top-level nuttx/README.txt
4267 - SMART FLASH file system (contributed by Add Ken Pettit).
4271 - Add support of MTD partitions via a new MTD driver that manages a
4274 - Extended the MTD interface to provide an (optional) method to
4276 - M25Px driver re-architected to use the byte write capability (when
4277 possible) and to use 4KB sectors for the erase block size when the
4282 - New interface definitions to support audio devices (from Ken Pettit)
4287 - Added new driver for the wireless nRF24L01+ transceiver (from
4292 - Added support for the Pirelli DP-L10 phone (from Craig Comstock via
4297 - Added an option to conditionally disable the "wfi" sleep mode. This
4298 is needed with certain JTAG debuggers to prevent the debug session
4300 - Added support for the STM32L (STM32L15X/STM32L16x) family.
4301 - Added STM32F103C4 and F103C8 chip support (from Laurent Latil).
4302 - Added a new interface function, stm32_dmacapable() that can be used
4303 to determine if DMA is possible from the specified memory address
4308 - If CONFIG_STM32_DMACAPABLE is defined, the STM32 SPI driver now uses
4309 stm32_dmacapable() to determine if it is possible to perform DMA
4316 - Support added for the MikroElektronika Mikromedia for STM32F4
4319 - The HY-mini STM32v board now uses the common SSD1289 driver
4322 - Support added for the R65105-based LCD that comes with some
4323 HY-Mini STM32v boards (from Christian Faure).
4324 - Added basic support for the STM32L-Discovery board. Drivers
4325 for the on-board segment LCD are included.
4326 - Added support for the STM32 Tiny development board based on the
4332 - Support added for a TI/Stellaris internal FLASH MTD driver (from Max
4337 - The LM3S6965-EK now has configurations for the UDP discovery tool and
4338 for the TCP echo server (both from Max Holtzberg)
4342 - Reorganized, renamed, and updated directory structure to better
4344 - Added support for both the ATSAM4S and ATSAM4L families. The
4345 ATSAM4S is similar to the ATSAM3U, but the ATSAM4L is quite a
4346 different beast, really much more akin to the AVR32s SoCs but
4347 with a Cortex-M4.
4351 - Added support for the Atmel SAM4L Xplained Pro development board.
4352 This board features the ATSAM4LC4C MCU (Cortex-M4 with 256KB FLASH +
4354 - Added support for the Atmel SAM4S Xplained developement board. This
4355 board features the ATSAM4S16C MCU (Cortex-M4 with 1MB FLASH + 128KB
4360 - Added support for the 1602 segment LCD on-board the Sure PIC32MX
4366 - Clean-up of almost all .gitignore files: Made scope of ignore to be
4370 - Standardize and consolidated all build-as-an-NSH-application
4372 sufficient to build an application, test, or or example as an NSH
4374 - Added support for a generic ARM, ARMv6-M and ARMv7-M Windows EABI
4379 - Added encoder/decoder logic to marshal and serialize special segment
4381 similar to the encoding/decoding logic that is used to marshal
4383 - Add dprintf() and vdprintf() (the latter from Andrew Tridgell).
4384 - Add an application that may be built as an NSH builtin command that
4389 - Added an MTD partition test/examples. Currently used with (1) the a
4390 simulation configuration to test MTD partitions on a RAM emulation
4392 - Added a test/example to verify alphanumeric, segment LCDs.
4393 - Added a simple single threaded, poll based TCP echo server based
4396 - Added several tests of the SMART block driver and file system (from
4398 - Added a runtime configuration for the UDP discover utility (from
4400 - Added an example application to demo the nRF24L01 driver (from
4402 - New and modified NSH commands:
4403 Added a -h option to the df command to show the volume information
4408 implemented but present in this release. Most are expected to be fully
4413 - A complete audio subsystem include CODECs, higher level management,
4416 release and so is categorized as a work-in-progress. At present,
4417 progress is blocked due to issues interfacing with the VS1053
4420 * kconfig-fronted Configuration:
4422 - Conversion of old configurations to use the kconfig-frontends
4425 to use the kconfig-frontends tools.
4431 - Modify assertion in the priority inheritance logic that is reported
4432 to cause false alarm assertions.
4436 - Typo in syscall proxying logic corrected by Ken Pettit.
4440 - Poll setup/teardown logic should ignore invalid (i.e., negative)
4442 - When readahead data is available, the network poll() logic should
4447 - Correct power controls in the MIO283QT2 LCD driver.
4451 - Change the default IN request buffer size from 64 to 96. This will
4453 NULL packets. Also, fix the OUT request buffers size to exactly the
4458 - Correct some bad STM32 F1 DMA definitions that crept into the system
4460 - Fixed an error in NULL packet handling in the STM32 F1 USB device
4461 controller driver: If the NULL-packet needed flag ever got set,
4467 - Correct some bad condition compilation in the RCC logic (CONFIG_
4468 missing from setting names). This affects some STM32 FLASH pre-
4470 - Change for hardware flow control support for STM32. The change also
4473 - Fixed a backward conditional in USB OTG FS host controller driver
4478 - I2C interrupt control. Also correction for a single byte read
4483 - Freedom KL25Z pin multiplexing and LED control corrections (from
4488 - Fix NULL packet handling in the PIC32 USB device driver. Without
4495 - Default priorities for NxWidget and NxWM threads should be 100,
4496 not 50, to be consistent with other default priorities.
4500 - Remove the CONFIG_EXAMPLES_NXTEXT_NOGETRUN option from the NXTEXT
4503 - C++ name mangling was occurring when this example is built as an NSH
4504 built-in application causing the entry to be undefined when called
4506 - Add some missing NSH library configuration values (from Lorenz
4509 NuttX-6.29
4510 ----------
4514 that release consists of two tarballs: nuttx-6.29.tar.gz and
4515 apps-6.29.tar.gz. Both may be needed (see the top-level nuttx/README.txt
4522 - Generalized the SSD1306 driver and added support UG-2832HSWEG04
4523 which is very similar to the existing support for the
4524 UG-2864HSWEG01.
4525 - Added support for a generic bit-bang SPI driver. This includes
4526 both a common "upper half" driver as well as a platformp-specific
4529 * ARMv7-A, Cortex-A5
4531 - Added support for the ARMv7-A architecture and the Cortex-A5 in particular.
4533 * ARMv7-M, Cortex-M3/4
4535 - Modified how some registers are copied during a context switch (with
4537 time when the context switch is due to interrupt level processing.
4541 - Added support for a separate CCM heap. This may be useful for
4547 - DAC: Added support for DAC DMA (contributed by John Wharington).
4548 - I2C: An I2C driver for the STM32 F3 family (from John Wharington).
4552 - Add support for SAM3X and SAM3A chips
4556 - Re-architect the SAM3/4 SPI driver so that is it compatible with the
4558 - Added register definition file for the SAM4L LCD peripheral.
4559 - Added SAM4L PDCA register definition file
4563 - SAM4L-Xplained: Added support for the SPI-based SD card on the I/O1
4565 - SAM4L-Xplained: Added a driver for the LED1 segment LCD module.
4566 - SAM4L-Xplained: Added support for the UG-2832HSWEG04 OLED on the
4568 - SAM4S-Xplained: Added support for on-board 1MB SRAM
4569 - Arduino Due: Basic support for the Arduino Due (SAM3X) is now
4571 - SAM3U-EK: The touchscreen is now functional.
4575 - Added support for the Atmel AT91SAMA5D3 Cortex-A5 chip family.
4579 - Added support for the Atmel SAMA5D3x-EK boards which use the AT9
4584 - Freescale KL25Z TSI register definitions and example TSI driver for
4586 - Added SPI driver and register definitions for the Freescale KL25Z.
4587 - Added a framework for controlling SPI-related discrete inputs and
4592 - New sub-directories to hold SPI-related files: includes/nuttx/spi.h
4593 moved to include/nuttx/spi/.; SPI-related Kconfig info moved from
4594 drivers/Kconfig to drivers/spi/kconfig.
4595 - Finally... I changed the naming of configuration variables like
4596 CONFIG_DRAM_ to CONFIG_RAM_. This has bothered me for a long time
4602 - Added CRC16 support.
4606 - Added Zmodem file transfer support. This may be used as an embedded
4609 - C++ initializers should be set once and, preferably, in the context
4614 configuration options to control who does the C++ initialization.
4616 configured to do otherwise. Conversely, cxxtest and helloxx
4618 - examples/cxxtext: Add ostream test as provided by Michael.
4619 - NSH: Added a 'cmp' command that can be used to compare two files
4624 implemented but present in this release. They are not likely to be
4629 - A complete audio subsystem include CODECs, higher level management,
4632 release and so is categorized as a work-in-progress. At present,
4633 progress is blocked due to issues interfacing with the VS1053
4636 * kconfig-fronted Configuration:
4638 - Conversion of old configurations to use the kconfig-frontends
4641 to use the kconfig-frontends tools.
4647 - Fixed compilation error if no file systems are enabled: Change
4648 error to ERROR.
4649 - Read-Ahead/Write buffering: Correct typos that can cause failures
4654 - Remove the wait for the touchscreen busy bit in the ADS7843E driver.
4655 From my reading of the ADS7843 spec, it would not be appropriate to
4656 wait for the BUSY bit to de-asserted anyway (since it is only de-
4657 asserted when we read the data). Most boards do not even bother to
4659 - MMC/SD SPI based driver: Driver needs to make sure that the SPI
4661 - ENC28J60: Change buffer ordering to work around Errata. From Dave
4666 - Fixed a typo in the composite device driver unitialization logic.
4668 - usbdev.h: Fix some typos that cause compiler errors when
4674 - Fix a bug (uninitialized register error) that crept in the ARM9
4675 boot-up code several years ago. Obviously no one has used the
4680 - Fix STM32 OTF FS endpoint allocation logic. Apparently the same
4683 OUT. This resulted in failures to allocate endpoints when used with
4685 - SDIO: Add support for the data block end (DBCKEND) interrupt to
4687 - DAC: Fixed numerous DAC driver errors and added support for DAC
4692 - SAM4S: Correct configuration of PIO pins for SAM4S B and C peripherals.
4693 - Need to disable write protection before configuring PIO pins.
4694 - GPIO configuration logic must protect against re-entrancy.
4695 - Clocking must be applied to the SMC module for the 3X and 3A family in
4696 order for the NFC SRAM to be functional.
4697 - Fixed some errors for interrupts on ports D-F.
4701 - Common SPI driver: Fix SPI mode setting. In the SAM3/4 family, the
4707 - SAM3U-EK: Fix polarity of the /PENIRQ signal (it is active low).
4708 The SAM3U-EK board now runs at 96MHz.
4712 - apps/examples/nxhello: Minor fix for compilation error when the
4713 display resolution is low (< 8bpp) due to a typo that has been there
4715 - apps/system/ramtest: The RAM test was not correctly built
4717 - apps/examples/composite: Change to prevent some false alarm debug
4720 NuttX-6.30
4721 ----------
4725 that release consists of two tarballs: nuttx-6.30.tar.gz and
4726 apps-6.30.tar.gz. Both may be needed (see the top-level nuttx/README.txt
4733 - Extended TERMIOS support for serial and CDC/ACM drivers. From
4735 - Added option to disable serial port reordering. From Lorenz Meier.
4736 - Several changes to the USB host control interface and extensions to
4737 common USB host logic to handle host controllers with multiple
4739 - USB device tracing: Extended decoding and stringifying of USB trace
4740 output to include trace output from class drivers.
4741 - USB host tracing: Added support for USB host tracing similar in
4742 some ways to USB device tracing: Stringification is an inherent
4748 - Support for the Microchip ENCX24J600 Ethernet driver from Max
4750 - CC3000 Networking. Initial support for the TI CC3000 network
4751 module on the Freescale Freedom-KL25Z board from Alan Carvalho
4754 * ARMv7-A, Cortex-A5
4756 - Restructured some MMU-related logic and header files.
4757 - Hooks added for Cortex-A8, but not yet used.
4761 - STM32 SPI: nbits() interface extended to control bit order as well
4766 - Olimex STM32-P107: Incorporate ENCX24J600 networking for the Olimex
4768 - LeafLabs Maple Board: Add board support for the LeafLabs Maple and
4773 - Added support for the SAMA5 DMAC controllers.
4774 - DMA-capable drivers for the SAMA5 SPI peripherals.
4775 - DMA-capable HSCMCI 0/1/2 drivers.
4776 - Support for PIO interrupts
4777 - Utilities for intelligent conversions between physical and virtual
4779 - Added USB host controller drivers for both the OHCI (low- and full-
4780 speed) peripheral and the ECHI (high-speed) peripheral.
4781 - Added USB device controller for the SAMA5 UDPHS peripheral (full-
4782 and high-speed).
4783 - Added a Two Wire (TWI) driver. This is a variant of I2C.
4785 * Atmel AT91 SAMA5D3x-EK Development Boards
4787 - Now supports onboard SDRAM. Modified heap initialization logic
4788 to include SDRAM if configured.
4789 - Integrated a FAT file system on the on-board SPI-based AT25 serial
4791 - Integrated HSMCI0 and HSMCI1 support for the microSD and full file
4793 - Integrated USB OHCI and ECHI host and high-speed peripheral support.
4796 - Integrated the TWI driver and the I2C tool. Added support for an
4801 - apps/examples/cc3000. Initial support for the TI CC3000 network
4802 module on the Freescale Freedom-KL25Z board from Alan Carvalho de
4803 Assis. Includes the test to verify the CC3000.
4804 - apps/examples/usbmsc: apps/examples/usbstorage renamed usbmsc for
4806 - apps/system/usbmonitor: The USB monitor has been extended so that
4810 implemented but present in this release. They are not likely to be
4815 - CC3000 Networking. Initial support for the TI CC3000 network
4816 module on the Freescale Freedom-KL25Z board from Alan Carvalho
4819 * kconfig-fronted Configuration:
4821 - Conversion of old configurations to use the kconfig-frontends
4824 to use the kconfig-frontends tools.
4830 - ROMFS: Fix an error where long (>15) file names were read
4832 - NXFFS: Clean up some compiler warnings.
4836 - MMC/SD driver: Correction for a bad return value when multiple
4838 - USB HID keyboard and mass storage host-side class drivers: Fix some
4839 compilation errors and warnings when pre-allocated data structures
4841 - USB device-side class drivers: Fix some compilations errors when
4842 DUALSPEED (i.e., full- and high-sped) support is enabled.
4843 - CDC/ACM and PL2303: Don't use max packetsize assigned to the endpoint
4846 been configured. Really only an issue for high-speed endpoints.
4847 - USB Host Mast Storage Class: Fixed a problem that was causing some
4848 devices to fail to initialize: If device is returning fatal transfer
4849 errors while attempting to initialize, don't bother with the startup
4852 - USB Host Mast Storage Class: Correct a reference counting error:
4857 - USB Device CDC/ACM: Fix backward conditional compilation in the
4858 CDC/ACM driver with regard to remote wakeup and self-powered
4863 - ARP IP harvesting: Correct backward condition in netmask task.
4865 - Network connection monitor: Fixes a race condition where a loss of
4868 - TCP/IP Backlog: Fix a critical bug in the TCP/IP backlog
4869 initialization: Only the first backlog buffer was getting added to
4871 - ENC28J60: Fixes and improvements back-ported from the ENCX24J600
4872 to the ENC28J60 by Max Holtzberg.
4876 - STM32 I2C fixes for the STM32 F3 family from John Wharington.
4877 - STM32 I2C Correct an error that crept into the STM32 F1 I2C
4879 - STM32 F4: Added some missing CONFIG_SERIAL_TERMIOS support; Fixed
4881 - STM32 SDIO: If CONFIG_SDIO_BLOCKSETUP defined, OS would crash. Now
4884 - STM32 I2C Timers: Some CCER bit settings changed. Submitted by
4886 - STM32 CAN: Fix access to CAN filter registers. From the PX4 team
4888 - STM32 Kconfig: Fix STM32 UART7/8 Kconfig names and UART DMA. From
4893 - Fix #endif with missing #if in USB host header file. Reported
4898 - Corrected DMA-related problems: Bad register definitions, parameters
4900 - Correct a race condition in the HSMCI driver when an interrupt
4902 - Peripheral clock setup: Correct a typo in a register name.
4906 - Order of some operations changed in boot-up logic to defer
4908 - Correct handling of spurious interrupts.
4912 - KL25Z SPI: Correct typo in name of a function. From Alan Carvalho
4917 - apps/examples/composite: Fix a typo that can cause a configuration
4919 - apps/examples/pwm: Clean-up some configuration confusion.
4920 - apps/netutils/dhcpd/dhcpd.c: Fixed calculation of the next lease
4922 - apps/examples/usbmsc: Don't try to control USB trace if we are
4923 an NSH built-in task. In that case our attempts are inadequate
4924 and only interfere with with other logic that is attempting to
4925 to do the same thing (in NSH or in the USB monitor).
4926 - apps/examples/usbmsc: IMPORTANT bug fix: Change how the msconn
4928 This was because the USB MSC start-up logic creates a pthread;
4932 a pthread, but we are stuck with that for now. The work-around
4935 - apps/nshlib: Fix NSH listing output for the case of a single file.
4938 NuttX-6.31
4939 ----------
4943 that release consists of two tarballs: nuttx-6.31.tar.gz and
4944 apps-6.31.tar.gz. Both may be needed (see the top-level nuttx/README.txt
4951 - Standardized stack checking logic so the interfaces can be used
4956 - Ken Pettit has finally released his long awaited audio subsystem.
4960 - Ken Pettit's VS1053 audio CODEC driver is now functional.
4964 - Add the prefix ETH0 to all PHY configuration selections. This
4965 will allow us to support to Ethernet MAC drivers with two different
4967 - Add MII/RMII PHY definitions for the Micrel KSZ8051 PHY.
4968 - Add GMII/GRMII PHY definitions for the Micrel KSZ9021/31 PHY.
4969 - New network-optimized, higher-performance sendfile() implementation
4971 - Added a simple routing table. This table is currenly only used (1)
4972 when we need to look-up an Ethernet device based on an IP address,
4973 and (2) in the ARP logic when we need to request the MAC address of
4975 - Make net_close() nonblocking and free unestablished connections if
4977 - Changed the meaning of the uip_*input functions. They now return
4979 driver that must make a decision to return the packet or not: It
4981 - David Sidrane has completed integration of the CC3000 networking.
4983 replacement for the NuttX networking with off-chip networking support
4985 - Numerous enhancements to the ENCX24J600 driver from Max Holtberg.
4989 - The SST25 serial FLASH MTD driver now includes support for the
4991 - Add a preflight method to the SDIO interface to support the STM32
4993 - Enhanced the MMC/SD SDIO driver to perform DMA preflight operations
4996 - Add an ioctl command that can be used to trigger ADC/DAC conversion
5001 - Enhanced the FAT32 filesystem code to understand DMA preflight
5002 failures, and to use the file sector buffer as a bounce buffer when
5003 a user-supplied buffer is not suitable for DMA. From Mike Smith.
5007 - Add support so that subsets of the total DRAM (and other external
5008 memory) can be added to the heap, leaving other memory reserved for
5013 - Use more descriptive task names when starting the EHCI and OHCI
5015 - Added a 10/100Base-T Ethernet (EMAC) driver.
5016 - Added a 1000Base-T Ethernet (GMAC) driver.
5017 - Added a Real Time Clock (RTC) driver and integrated with the NuttX
5019 - Added support for /dev/random using the SAMA5D3x True Random Number
5021 - Added a Watchdog Timer (WDT) driver.
5022 - Added a Timer/Counter (TC) library with interface that make be used
5024 - Added an ADC driver that can collect multiple samples using the
5027 - Added a touchscreen driver based on the special features of the
5029 - Added an LCD controller (LCDC) frame buffer driver.
5030 - Added a CAN driver. However, testing has been delayed because of
5032 - Basic header file support is available for the Image Sensor
5036 * Atmel AT91 SAMA5D3x-EK Development Boards
5038 - Add OS test support for the FPU test.
5039 - Enable the task name feature board configuration sto provide
5041 - Added NX and NxWM configurations to verify the LCD and touchscreen.
5044 - The TRNG and /dev/random are now enabled by default in the demo
5049 - Add configuration to select revision 3 of the Arduino Due which has
5054 - Add support for the STM32F207ZE chip. From Martin Lederhilger.
5058 - Add configuration for the Spark Core. The initial check-in is
5062 - Support for the Olimex STM32 P207 board added by Martin Lederhilger.
5063 - Configuration for the Mikroe STM32F4 board configuration updated for
5068 - zkit-arm-1769: LED1 is now user controllable after booting. From
5073 - PIT and TPM register definitions header files for the from Alan
5075 - Added low-level getc() function for operation with no file system.
5081 - A new configuration called minnsh was added is an experiement to
5087 - Basic board support for the Motorola C139 (Compal E86) phone. From
5092 - Moved several useful examples from apps/examples to apps/system.
5094 - New addroute and delroute commands added to NSH in order to manage
5096 - Numerous enhancements and updates to the CC3000 example from David
5098 - Add a new stack monitor daemon that can be used to constantly
5100 - Numerous changes to get NSH working with no file system. Basically
5101 this suppresses I/O redirection and replaces file I/O with calls to
5102 low-level console read/write functions. Suggested by Alan Carvalho
5104 - apps/system/nxplayer: A new, command-line media player called
5106 - apps/examples/random: Add a simple test that dumps values from
5108 - apps/examples/adc: Add support so that a ADC driven by software
5113 - The MKDEP tools now support a new argument that identifies the
5117 implemented but present in this release. They are not likely to be
5120 * kconfig-fronted Configuration:
5122 - Conversion of old configurations to use the kconfig-frontends
5125 to use the kconfig-frontends tools.
5131 - IDLE thread initialization logic should not call group_setupidlefiles()
5133 - Fix some cornercase error handling logic: If sched_releasetcb() is
5140 - Look up of a device using subnet will fail if the packet is being
5141 sent out of our subnet (via a router). The fallback here is just to
5143 was extended to handle multiple Ethernet devices by adding a simple
5145 - Fix some backward conditional logic in send() that enabled the
5147 - Notify the socket layer from the network monitor if a connection is
5150 - send(): Reset the send timeout when the data is ACKed, not when the
5153 - Correct how the TCP/IP initial minimum MSS is calculated. Max
5155 - TCP state machine: Move tcp connection into SYN_RCVD state after
5158 - Numerous fixes to the ENCX24J600 driver from Max Holtberg.
5162 - Change naming of SELFPOWERED and REMOTEWAKEUP to avoid name
5165 - CDC/ACM class driver: Change the interval for the interrupt
5166 endpoint from 0xff (invalid) to 10. This is not a critical
5170 * ARM Cortex-A5:
5172 - Fix an error in data cache clean and invalidate functions: Fix of
5173 addresses to cache line boundaries.
5177 - Correct some inconsistencies in the way that USB configuration
5180 - When 480MHz UPLL is used to drive OHCI, it should have a divider
5182 - OHCI HCD: Fix a place where DMA-related data needed to be flushed
5183 to data cache; Fix another where a virtual address was being used
5185 - HSMCI Driver: TX DMA disabled. It is just not reliable. No idea
5187 - STM32F103C pinmapping corrections from David Sidrane.
5189 * Atmel SAMA5D3x-EK Board
5191 - Increase the number of pre-allocated watchdog timers. The default
5197 - STM32 F4 DMA definitions: Typo fixes for UART7 and UART8 DMA
5199 - DMA priority configuration corrections from Mike Smith.
5200 - Changes to the stm32_dmacapable API. In order to correctly
5204 stm32f4xx devices to check for additional conditions that will cause
5205 DMA to fail or lose data.
5206 - STM32 F1 DMA fix from David Sidrane: The DMA_CNDTRx register
5211 - Fix compilation errors from bad bit definitions in ADC and PWM
5213 - DMA-related fixes to the SPI driver from Ken Pettit.
5217 - Remove undefined spi_select() prototype. This was causing compile
5222 - zkit-arm-1768: MMC/SD is on SPI, not SSP0. From Rashid Fatah.
5226 - scanf() fixes from kfrolov: 1) sscanf() function hangs in the
5231 function leads to warnings from GCC.
5235 - Dependency generation generation was broken for directories that
5236 keep objects in a sub-directory. The MKDEP tools now support a new
5238 - tools/define.sh: 'cut' no longer works as it once did. Script
5239 adapted to observed behavior.
5243 - Remove a warning from the NSH library when DHCP is not enabled.
5244 - Default NSH IP address should be 0x0a000001 (10.0.0.1), not
5246 - Add some missing options to the OS test Kconfig file
5247 - Fix some bad conditional compilation in the USB monitor.
5248 - Fix default I2C frequency used by the I2C tool: 400KHz instead
5250 - Increase stack size for the system/info command. Ken Petit
5253 increased to 1024 by default but is also now configurable.
5254 - apps/Makefile: Needs to include external/Make.defs if we want
5255 allow external applications to participate in the NuttX
5257 - apps/netutils/telnetd: Missing argument to debug statement
5260 - apps/examples/can: Correct an error in a debug statement. From
5263 NuttX-6.32
5264 ----------
5268 that release consists of two tarballs: nuttx-6.32.tar.gz and
5269 apps-6.32.tar.gz. Both may be needed (see the top-level nuttx/README.txt
5276 - Extension and standardization of stack debug logic. Now includes
5282 - I2S interface definition. Integrates with audio sub-system.
5283 - VS1053 worker thread stack size is now configurable and assigned a
5288 - Updates and adaptations to support for TI CC3000 wireless module
5289 from David Sidrane. These updates include multi-threading support
5290 and interface and header file changes to integrate more seamlessly
5295 - procfs: Add support for a tiny procfs file system. The initial
5298 - NXFFS: An initial attempt was made to integrate NXFFS with the NAND
5299 MTD driver. Changes were made to handle bad blocks. However, I
5301 is re-writes blocks is incompatible with the NAND ECC handling.
5302 These changes were backed-out so as not to introduce turmoil, but
5303 can be re-enabled if needed via configuration option.
5304 - NXFFS: Make the start up scan of the media a configuration option.
5305 It just takes to long and is not really necessary! Those rare cases
5311 - I2S: A simple character driver was added to support I2S accesses.
5312 This driver in its current state is intended only to support I2C
5313 testing and would not be appropriate to used for any real driver
5318 - Add a container for an MTD device that can be used to provide a
5319 simple, lightweight interface to configuration data storage that
5322 - New interface definition for lower half NAND drivers.
5323 - MTD Nand: Add MTD NAND driver that will support ONFI devices,
5324 non-ONFI devices (via table lookup), bad block checking, software
5325 ECC (Hamming), and will interact with the lower-half, hardware-
5326 specific, NAND driver. Based on BSD-compatible Atmel sample code.
5327 - MTD geometry structure is now packed so that it can support larger
5330 - SST25: Add another SST25 SerialFlash driver, sst25xx.c. This one
5337 - STM32 F1 USB Device: Add support for decoded USB trace strings.
5342 - Add more ARM9 cache management functions to flush and invalidate
5343 D-Cache for DMA support.
5347 - Many new drivers including CAN, PWM, SSC/I2S
5348 - PCK: Add support for programmable clock outputs.
5349 - NAND: Driver with hardware ECC and DMA support
5353 - SAMA5D3x-EK: Add support for the apps/examples/i2schar test.
5354 - SAMA5D3x-EK: Provides board-specific memory controller initialize
5356 - SAMA5D3x-EK: Add support for "auto-mounting" NAND MTD block driver
5361 - Basic support for the Atmel SAM4E family. From Mitko.
5365 - Added support for the STM32F429. From Ken Pettit.
5366 - Added support for GPIOK and GPIOJ. From Ken Pettit.
5370 - STM32 F4 OTG FS/HS Device: OTG FS device and host drivers extended
5372 peripheral (in FS mode). This was done as a quick way to get USB
5374 - Added header files and driver framework for the STM32F429 LTDC
5379 - Support for the Spark board was completely by Davide Sidrane. The
5382 used both to export the FAT file system and to provide a serial
5384 - The Mikroe-stm32f4 now uses /dev/config for configuration data
5386 - Added support for the STM32F429I-Discovery board from Ken Pettit.
5387 - Added board support for the ViewTool STM32F103/F107 board with the
5392 - USB ECHI HCD: Add a driver for the low-/full-/high-speed variant
5397 - Board-specific USB host support for the Emedded Artists EA3131 board.
5399 - Add support for the Olimex LPC-H3131 board. Including USB host
5404 - PWM driver for the Freescale Kinetis KL family from Alan Carvalho
5409 - Freedom-KL25Z: Add PWM support from Alan Carvalho de Assis.
5413 - Don't initialize .data in start-up logic if not running from FLASH.
5417 - apps/platform: A new home for platform-specific application code.
5418 - Define a common interface that can be used to manage platform-
5420 - apps/examples/configdata: A unit test for the MTD configuration
5422 - Aapps/platform/mikroe-stm32f4: dd platform-specific storage of
5423 configuration data for the Mikroe-stm32f4. From Ken Pettit.
5424 - apps/examples/cc3000: Fine tuning of memory usage from David Sidrane.
5425 - apps/system/nxplayer: Play thread stack size is now configurable.
5428 - apps/examples/i2schar: The I2S test based on the I2S character
5430 - apps/examples/hidkbd/hidkbd_main.c: Now calls a function named
5431 arch_usbhost_initialize() that must be provided by the platform-
5433 - NSH:
5435 - hexdump: Add skip= and count= options to the hexdump command. From Ken Pettit.
5436 - Allow USB trace without a USB console. From David Sidrane.
5437 - Mount command updates from Ken Pettit.
5438 - Add an option to the mkfatfs command to specify FAT12, FAT16, or FAT32.
5442 - tools/mkctags.sh: A script for creating ctags from Ken Pettit.
5445 implemented but present in this release. They are not likely to be
5448 * kconfig-fronted Configuration:
5450 - Conversion of old configurations to use the kconfig-frontends
5453 to use the kconfig-frontends tools.
5459 - FAT: In one error return case, the error return value was not being
5461 - mount: SMART FS must be included in the conditional compilation for
5464 - SmartFS: Fixed a minor bug with SMART partition number reporting
5465 that would only be seen if both partition support and multi-root
5467 - Deadlock: The inode semaphore must be re-entrant. Here is the re-
5468 entrant path that I found: (1) USB host connects to FLASH drive and
5472 called, taking the inode semaphore, now the driver tries to destroy
5474 unregister_blockdriver() also takes the inode semaphore causing a
5475 deadlock if the inode semaphore is not re-entrant.
5476 - FAT: Fix a typo in the FAT16 formatting logic. Was this ever able to
5481 - MTD Partitions: Fix erase block vs page block confusion. From Ken
5483 - SST25 Serial Flash: Improved write performance by fixing a bug that
5488 - USB MSC Device: pthread_join() does not work if called from a
5491 USB MSC thread to a task, however, this workaround from David
5493 - USB CDC/ACM, USB MSC, and Composite Device Classes: Un-initialization
5494 logic caused re-use of a stale pointer. Changed to a two pass
5495 un-initialization for the case of the composite driver: Memory
5496 resources are not freed until the second un-initialization pass.
5501 - STM32 F1 USB Device: Fix some errors that cause crashes when the USB
5503 - STM32 F1 USB Device: Correct EP0 state handling logic when buffers
5505 - STM32 F1 USB Device: The long outstanding bug involving the handling
5508 - Kconfig: Add missing setup of CAN TSEG1 and TSEG2 values. From
5513 - tools/mkconfig.c: SMART FS must be included in the conditional
5519 - apps/platform/Makefile: Was not dealing with the bin sub-directory
5521 - apps/system/composite/composite_main.c: The wrong handle was getting
5524 NuttX-6.33
5525 ----------
5529 that release consists of two tarballs: nuttx-6.33.tar.gz and
5530 apps-6.33.tar.gz. Both may be needed (see the top-level nuttx/README.txt
5537 - nanosleep() added. sleep() and usleep() are no longer core OS
5538 interfaces. These have been moved into the library and re-implemented
5543 - procfs restructured by Ken Pettit. Added files for MTD status.
5544 - procfs extended to show uptime and task group status.
5545 - procfs now shows stack information.
5549 - Add support for the SO_LINGER socket option. Extended from logic
5551 - TCP write buffering support added. From Jason Jiang.
5552 - Changes from Max Holtzberg to improve how network status is
5553 reported. New controls to manage carrier detect.
5557 - Massive reshuffling of files with little or no logic changes. This
5558 reshuffling was necessary to build graphics applications with the
5561 of nuttx/graphics to a new user library, libnx.
5563 * Cortex-A5/A8/A9
5565 - Existing Cortex-A5 support updated to include Cortex-A8/9.
5566 - Add the syscall.h header file needed for the Cortex-A architecture.
5567 - Start-up logic now supports execution from FLASH with .data and
5568 .bss in SDRAM. This was not possible prior to this because .bss
5573 - Basic support for the Allwinner A10 (Cortex-A8) is in place.
5577 - Support for the pcDuino v1 board has been added. This support
5579 good starting point, however, if anyone wants to develop A10
5584 - Start-up logic now supports execution from FLASH with .data and
5585 .bss in SDRAM. This was not possible prior to this because .bss
5590 - Partial logic in place to support the OV2640 camera. Still needs
5591 quite a bit of additional logic to be useful.
5593 * ARMv7-M
5595 - Add support for high priority, nested interrupts. This change
5596 effects not only core ARMv-7M logic, but all ARMv7-M MCU logic:
5602 - Add clocking support for STM32F107 USB OTG FS (which does not yet
5604 - Single-wire UART support for the F1 series from Thomas Grubler.
5608 - The Viewtool board can now be configured to support either the
5610 - The Viewtool STM32F107VCT6 now supports networking with the
5612 - Add support for Viewtool SSD1289-based LCD on the Viewtool
5614 - Add support for the XPT2046 touchscreen controller on the Viewtool
5615 LCD module connected to the Viewtool STM32F103 board.
5616 - Added kernel mode build support for the STM3240G-EVAL board. Added
5618 - C++ static constructor logic from the nuttx/configs/stm3240g-eval/
5619 directory to the apps/platform/stm3240g-eval/up_cxxinitialize.c
5620 where is belongs so that it is available in user-space in the kernel
5622 - Add native Windows build support for the Olimex STM32 P107. From
5624 - Support for the STM32VL-Discovery board. Contributed by Alan
5626 - Added a configuration for testing simple configurations on the
5631 - Add an NSH configuration for the Z16F2800100ZCOG ZNEO board.
5632 - Added support for the Toyaga 16Z ZNEO board. The 16Z board is
5635 - Developed a patch to work around a compiler error that is revealed
5638 * Architecture-Independent Drivers
5640 - OV2640 Camera Driver.
5641 - Support for the Sharp Memory LCD from Librae.
5645 - Pattern matching logic extended to handle set of characters and
5647 - sleep() and usleep() moved intot the C library. These are not
5650 - Add an implementation of gets_s().
5651 - Extend fopen() to include support for C11 exclusive open ("x")
5653 - Add an implementation of stpcpy()
5654 - strtol(), strtoll, strtoul(), strtoull(), and strtod() from
5655 libc/string to libc/stdlib where they belong.
5659 - Add rsize_t to include/sys/types.h
5660 - Add the C11 thread.h header file
5664 - Top level Makefile now supports qconfig and/or gconfig targets that
5666 kconfig-frontends with support for kconfig-qconf and/or
5667 kconfig-gconf.
5668 - Add CONFIG_DEBUG_NOOPT. Now you can independently enable/disable
5670 - File system related header files moved to include/nuttx/fs
5671 - Video related header files moved to include/nuttx/video
5672 - Changes for native Windows build: fix creation of a .version file
5675 - Board configuration sub-directory can now be specified. The default
5677 is selected and there is no meaningful default sub-directory.
5678 - Many functions renamed to better conform with the naming standard:
5679 up_buttoninit() renamed to board_button_initialize(), up_buttons()
5680 renamed to board_buttons(), up_irqbutton() renamed to
5681 board_button_irq(), up_ledinit() renamed to board_led_initialize(),
5682 up_ledon() renamed to board_led_on(), and up_ledoff() renamed to
5688 - NSH: Refactor. Separate NSH command handling and command execution
5690 - NSH: Will now support multiple commands on a command line, each
5691 separated with a semi-colon.
5692 - NSH: Add support of commands enclosed in back quotes as command
5694 - NSH: Can now handle arguments that are concatenations of constant
5697 - NSH: Add true and false commands.
5698 - NSH: Add support for while-do-done and until-do-done loops. These
5700 ability to seek in the file to implement the looping behaviors.
5701 Can be conditionally compiled out to reduce footprint.
5702 - NSH: Loosen up if-then-else-fi syntax to allow a command to be on
5705 - NSH: Add a break command that can be executed with a loop to
5708 - system/inifile: A simple .INI file parser.
5709 - system/vi: Add support for a tiny, VI work-alike editor. This is
5714 implemented but present in this release. They are not likely to be
5717 * kconfig-fronted Configuration:
5719 - Conversion of old configurations to use the kconfig-frontends
5722 to use the kconfig-frontends tools.
5728 - Added missing sem_timedwait() system call.
5732 - Prevent tcp_connect callback from being double freed. From Max
5734 - uiplib: Support new definitions and state passing for network
5739 - FAT: (1) A correction to FAT cluster allocation, and (2) Fix to some
5741 Apparently this needs to done for all FAT types. Both from Andrew
5746 - Fix a small memory leak when attempting to load a program from a file.
5748 * Cortex-A8/9
5750 - Fix some errors in the cache invalidation logic (only seem to matter
5751 for Cortex-A8).
5752 - Add more nop's after enabling the MMU. The cortex-a8 seems to need
5757 - Fix a typo that caused a compilation error when
5760 * ARMv7-M
5762 - Correct alignment of RAM vector table.
5763 - Interrupt handling: Do not disable and enable the IRQ on each
5767 - Fix all implementations of up_disable_irq() for all Cortex-M3 and
5768 M4 architectures: To enable an interrupt on the Cortex-M3/4 CPU,
5769 you need to set a bit in the ISER register. To disable the
5770 interrupt, you need to set a bit in the ICER register. Existing
5771 logic was trying to disable interrupts by clearing the bit in the
5772 ISER register. That will not work; writing a '0' to the ISER
5776 some spurions STM32 ADC interrupts have been reported to me and this
5777 turned out to be the cause in that case. Thanks to Manuel St�hn for
5782 - Fix configuration and pin definitions that would prevent building
5784 - STM32L15xx: Fix a typo in USB pin definitions
5785 - Fix pin definition names for SPI2 MOSI and MISO. Noted by Brian Webb
5786 - Various fixes for STM32F103ZE SPI3 pin mapping definitions. From
5791 - Olimex STM32-P107: Failed to build if SPI3 for UEXT is not remapped.
5796 - Add a configuration option to select the -m32 compiler option when
5797 building for a 32-bit target on a native 64-bit compiler. So far,
5799 - Patch from Matt Campbell to fix 'Error: .size expression for idle_stack
5800 does not evaluate to a constant".
5804 - strftime(): Needs null termination on the generated string. From
5806 - Typo in ctype.h macro name: iscntrl(), not iscontrol().
5807 - If there are no arguments (argc == 1), then getopt() will leave the
5808 optind variable in an undefined state (2014-1-20).
5809 - ARMv7-M memcpy(): Assembler changes with the gcc-47 distribution
5810 from ARM mean that we need to be explicit about branch sizes; one
5816 - Fixes for some tools/ for Windows build issues from Max Holtzberg.
5817 - Config.mk: 'cypath' must be called if we are using a Windows native
5818 toolchain with the Cygwin 'make' to convert paths to proper
5820 - ARM Makefile: Dependency directory list is now computed from the
5822 - builtin/Makefile: Fixes for native Windows build from Max Holtzberg.
5823 - Refactor some configuration dependencies: NSH networking features
5829 - NSH: Modified the df -h logic to eliminate truncating numbers in
5830 conversion (like 7900 -> 7M). From Ken Pettit.
5832 NuttX-7.1
5833 ---------
5837 that release consists of two tarballs: nuttx-7.1.tar.gz and
5838 apps-7.1.tar.gz. Both may be needed (see the top-level nuttx/README.txt
5846 newer configurations generated by the kconfig-frontends tools will generate
5849 All board configurations in the NuttX source tree have been converted to
5851 for you board, you will need to convert those configurations to use the
5852 kconfig-frontends tools before taking any new code from the repository. See
5860 - System time logic now includes logic to measure and calculate the
5862 extended to keep counts on each thread. The per-thread CPU is
5864 "external" clock may be used to drive the CPU load calculations
5869 - As mentioned above, the per-thread CPU load information is now
5871 - Many file system interfaces have been extended to operate on the
5872 top-level NuttX pseudo filesystem. These include rmdir, mkdir,
5874 CONFIG_DISABLE_PSEUDOFS_OPERATIONS in order to keep the footprint
5879 - Numerous updates and improvements to the CC3000 driver from David
5884 - Defined a mouse interface that is very similar to a touchscreen
5886 touchscreen drivers, mouse drivers need to report positional data
5889 - Added support for a USB HID boot mouse device. Cursor support is
5892 - Support added for the MIO283QT9A LCD from Toby Duckworth.
5896 - Added complete architecture support for the Atmel AT91 SAM4E
5897 Cortex-M4F parts.
5901 - Add board support for the SAM4E-EK board.
5905 - Added logic to manage the Cortex-M Cache Control block.
5906 - Developed and integrated an Ethernet MAC driver for the SAM4E.
5907 - Backported the SAMA5 SPI driver to the SAM3/4 architecture. The
5914 - Added basic architecture support for the Atmel AT91 SAM D20
5915 Cortex-M0+ parts.
5919 - Added basic support for SAM D2 Xplained Pro board. Currently, the
5922 stopped, however, in order to focus on the SAM4E-EK.
5926 - Added architecture support for the TI Tiva TM4C123G parts. This was
5928 All directory, file, and function references changed from lm to tiva.
5932 - Added basic board support for the TM4C123G-Launchpad. As of this
5933 release the TM4C123G-Launchpad board support is untested and likely
5938 - The Mikroe STM32F4 can now support the newer MIO283QT9A LCD. From
5940 - Miscellaneous changes to better support FPU on STM32F429 Discovery
5945 - Incorporated I2C and SPI drivers for the LPC23xx from Lizhuoyi.
5949 - New QEMU keyboard and VGA drivers from Lizhuoyi.
5953 - Added a coding standards document. See
5958 - A configuration option, CONFIG_DEFAULT_SMALL, was added to select
5963 - CONFIG_DEFAULT_SMALL has been defined on all tiny MCU configurations
5966 - The legacy, manual configuration is no longer supported by the
5968 the kconfig-frontends tools will generate viable NuttX
5970 have been converted to use the newer configuration, but if you have
5971 some older style configurations for you board, you will need to
5972 convert those configurations to use the kconfig-frontends tools. See
5978 - NSH can now use an EMACS-like command line editor. This CLE, is
5981 - The touchscreen example can now be configured to work with either a
5983 - Several NSH commands can now be used to operate on objects in the
5984 top-level pseudo-filesystem: rmdir, mkdir, mv, and rm. This
5986 in order to keep the footprint small.
5987 - If both the CPU load feature and the procfs features are enabled,
5995 - task_terminate() always returned an error because the return value
5997 - nanosleep() Fix a missing call to re-enable interrupts (from Jason
6002 - Fixed an error in the FAT logic that can cause file corruption. The
6006 - Fixed memory leaks in the NXFFS open() and stat() implementations
6008 - The interfaces include opendir(), readdir(), et al, were modified so
6009 that errors will not be reported if you attempt to list a empty
6010 pseudo-directory.
6014 - Fix one place where the connection reference count was not being
6017 - Backed out a small part of the NuttX 6.33 write buffering changed.
6018 David G says that this causes problems in connecting to a server.
6019 - In DHCPD, there was a place where the logic was calling ntohl()
6025 - Fixed cut'n'paste error that prevented UARTS2-7 from being used with
6027 - Fixed several errors there were unmasked with UARTs > UART2 are
6032 - Fixed cut'n'paste error that prevented UARTS2-7 from being used with
6037 - Fix an compilation error that crept into the LPC17xx USB host driver.
6041 - Fix cloned typo in the serial driver: FLOWCONTROL vs FLOWCONROL.
6042 - Disable SPI before changing DPI CR1 register (from David Sidrane).
6043 - stm32 TIM: Set the timer CCMR when selecting timer channel. From
6045 - Fix typo in a Makefile: stm32_pwm.c not stm32_psm.c. Noted by Max
6050 - More sscanf() bug fixes from David Sidrane.
6054 - cstdbool: Ignore _Bool8 if CONFIG_C99_BOOL8=y
6058 - Several changes to restore the broken native Windows build
6062 - Use strncpy vs strcpy in the Telnet console logic to avoid
6065 - Add a newline after printing the file in the 'cat' command. This
6070 NuttX-7.2
6071 ---------
6075 that release consists of two tarballs: nuttx-7.2.tar.gz and
6076 apps-7.2.tar.gz. Both may be needed (see the top-level nuttx/README.txt
6083 - Add support for CLOCK_REALTIME. From Macs N.
6087 - Add a very primitive NTP client.
6088 - DNS resolver: Long needed major clean up for coding style and
6093 - Add a new MTD driver that can be used to contain another driver and
6094 force its apparent sector size to be 512 bytes.
6095 - If DCD can support queuing of stall requests, then the USB MSC stall
6097 - Redesign threading module used with the USB MSC driver. It was using
6098 pthreads before and these were changed to a kernel thread. The reason
6099 for this has to do with task grouping: A pthread is a memory of the
6102 allows me to remove so kludge logic to "deparent" the pthread on
6104 - Update the MIO183QT-9A LCD driver to support reading from the LCD.
6106 - Timer "upper half" driver and l"lower half" interface definition from
6111 - All SAM4E configurations updated to run with 120MHz CPU speed and
6113 - Support for the SAM4S Xplained Pro board from Bob Doiron.
6114 - Add watchdog driver. From Bob Doiron.
6118 - Add a USB full speed device driver (UDP) for the SAM4E.
6119 - Add support in HSMCI and SPI drivers to invalidate cached memory if
6121 - Add logic to handle SPI word widths > 8
6122 - Port RTC driver from SAMA5 to SAM3/4. From Bob Doiron.
6123 - HSMCI: Extensions from Bob Doiron needed to support PDC-based HSMCI
6128 - Add support for the SAMA5D36 chip.
6129 - Add functions to calculate PLLACK, PCK, and MCK frequencies given
6131 - Implemented RAM functions. When booting directly into NOR flash,
6139 - Add support for the SAMA5D3 DBGU.
6143 - Add a board support configuration for the Atmel SAMA5D3 Xplained
6144 board running out of SDRAM. When booting from SDRAM, start-up logic
6145 needd to query the PMC registers to determine the MCK, PCK, etc.
6146 - For all SAMA5 boards, added support for 528MHz clocking.
6150 - Modify the logic to disables the interrupts and sets the default
6151 interrupt priority so that it uses the ICTR to get the number of
6158 - Add support for the STM401RE. From Frank Bennett.
6162 - STM32F4Discovery: Add support to register keyboard and mouse
6164 - Add support for the Nucleo-F401RE board. From Frank Bennett.
6168 - Add STM32 Ethernet IGMP hashing support. From Manuel St�hn.
6169 - OTG FS Host: USB host tracing added by Leo.
6173 - Modify the logic to disables the interrupts and sets the default
6174 interrupt priority so that it uses the ICTR to get the number of
6181 - Modify the logic to disables the interrupts and sets the default
6182 interrupt priority so that it uses the ICTR to get the number of
6189 - Added ZNEO ESPI driver.
6193 - Finish incomplete support for ferror(). From Macs N.
6197 - UsbTrace.html: Add some discussion of the USB monitor.
6201 - compiler.h: Add macro UNUSED() that can be used to eliminate
6202 warnings about variables that are set to values that are not
6207 - Add a configuration option to enable dumping of the USB trace buffer
6212 - IGMP Example: Fill out Kconfig file; update makefile so that the
6213 IGMP example can be used as an NSH built-in application. From Manuel
6215 - lcdrw Example: Fill out empty Kconfig file.
6216 - touchscreen Example: Add a configuration option to indicate if
6217 architecture-specific initialized is required, yes or no.
6218 - System usbmsc: Back out the USBMSC daemon... it is no longer needed
6219 with the recent fix to the USBMSC class driver.
6220 - NSH: malloc/free IOBUFFER for 'cat' and 'hexdump' commands instead of
6222 - cpuhog, serialblaster, and serialrx Examples: Stress test examples
6229 - errno_get_errno_ptr() and getpid(): Add some checks. If these
6235 - IGMP-related bug fixes from Manuel St�hn.
6236 - In netdev_findbyaddr(), skip network devices that are in the "down"
6237 state. It does not make sense to consider an address match with a
6242 - DHCPD: The correct value of the PAD option. Should be zero, not
6244 - Corrections to the NTP client from Manuel Stuehn.
6248 - usbhost.h: Fix some USB HID-related conditional compilation. From Leo.
6249 - USB HID mouse driver: Don't include NAKs from the device in the error
6254 - Add corrected control logic for TM4C125GXL based on logic from Daniel
6260 - STM32 F2 SPI: Correct a mapping for SPI MOSI pin. From dlsitzer.
6261 - OTG FS Host: Fixes related to low-speed devices and interrupt
6262 endpoints from Leo. Necessary in order to use a USB HID mouse
6264 - STM32 SDIO: The dmaflight method must be conditioned on
6266 - Sourceforge Ticket #26. up_prioritize_irq should not be called
6271 - Fix some backward conditional compilation in the start-up logic.
6272 - Fix initialization of the default interrupt priorities. This is
6274 - SAM4S: Fix error in macros that disable peripheral clocking. From
6279 - Fix double mapping of SDRAM when executing out of SDRAM. In this
6281 - In clock configuration, the BMS bit handling was fixed to match
6283 - TLB Bufferable bit did not do what I thought it was going to do.
6284 I though I was selecting a write-through cache, but the result was
6286 - Move the un-definitions of __ramfuncs__ from the clock configuration
6287 .c file to the .h file. Otherwise, the attribute will be applied
6293 - Fix a case in the UDPHS driver where received status was not being
6294 cleared, causing OUT SETUP commands to fail.
6295 - TWI data sending fails to increment the number of bytes transferred
6297 - If running from SDRAM, then BOARD_MCK_FREQUENCY is not a constant
6304 - SAMA5D3x-EK: The red LED is controlled by PE24 which is also the
6308 - Header files reference type xcpt_t in certain configurations and
6314 - arm/src/lpc17xx/Kconfig and lpc17_ethernet.c: The default interrupt
6315 priority should be default, not the highest priority (2014-4-19).
6319 - Fix calculation of timer reload and prescaler. The timer frequency
6324 - strncpy(): Change ordering of test and copy. Logic would have
6327 - Fix a counting error in the return value from sscanf(). Noted by
6330 - Fix a logic error in ftell(). It was simply using the file offset
6332 - sccanf(): Use stroul() vs strol() with %u format otherwise, range
6337 - Fix a build error that occurs when only USB device tracing is enabled.
6341 - Fix NuttShell version number display in the NSH welcome message.
6346 - sysinfo: CONFIG_VERSION_BUILD is a string an needs to be
6348 - nxplayer: Compilation failure in one configuration reported by
6350 - System sdcard: Remove an STM32 dependency. From Bob Doiron.
6351 - telnetd Example: Naming is confused. In someplaces 'telnetd',
6352 and in others 'shell.' All changes to telnetd. Noted by Pelle
6355 NuttX-7.3
6356 ---------
6360 that release consists of two tarballs: nuttx-7.3.tar.gz and
6361 apps-7.3.tar.gz. Both may be needed (see the top-level nuttx/README.txt
6368 - Dynamic loader: Framework to support Pascal P-Code as a binary
6370 - Dynamic Loader: Extend the binfmt interface to handle error
6371 conditions where format-specific clean-up is needed in the event
6372 of error conditions. This is needed by the P-Code binfmt.
6376 - IOB: Add a generic I/O buffer chain logic. This logic uses small,
6377 pre-allocated buffers that can be chained together to support
6379 committing in advance to a TCP window size. There is now only
6382 - TCP Write Buffering: TCP write buffering logic converted to use
6384 - TCP Read-Ahead Buffering: TCP read-ahead buffering logic converted
6385 to use I/O buffer chains.
6386 - Includes logic to support throttling of read-ahead buffering if
6387 the read-ahead buffering is competing with write buffering for
6389 - Raw Sockets: Add support for the AF_PACKET socket family. From
6394 - W25 Serial FLASH driver extended by Mark Whitehorn to support the
6396 - Add support for Fujitsu MB85RS1MT RAMTRON part. From Charles Ash.
6397 - Enhancements to the generic timer interface to support capture mode
6399 - Add an rxflowcontrol method to the serial interface to better
6400 …ort RX flow control. This involves common changes in addition to minor updates to all MCU-specific…
6404 - Add support for the SAM4CM family. From Max Neklyudov.
6408 - RTT driver from Bob Doiron. Also added high resolution RTC
6409 emulation using the RTT for the sub-second counter.
6413 - The SAM4S Xplained Pro now uses the extended timer/counter
6415 - Added a touchscreen and LCD driver for the SAM4E-EK board (the LCD,
6420 - Optimized, high performance, assembly language memcpy(). This is
6422 for the ARMv7-M with minor tweaks by David Sidrane to work with
6423 the ARMv7-A.
6424 - Basic support added for the SAMA5D4 family.
6428 - SAMA5D4: New drivers unique to the SAMA5D4: XDMAC, SAIC, and
6433 - SAMA5D4-MB: Initial board support for the SAMA5D4-MB/EK boards.
6437 - Add support for the STM32152 and STM32162 Medium+ density parts
6438 (plus miscellaneous other improvements to the original STM32151
6443 - Support for the Olimex STM32 H405 board contributed by Martin
6448 - Implement the rxflowcontrol method to the serial interface to better
6453 - Added support for the RTC, ADC, DAC, Timers, PWM and MCPWM
6458 - Support for the RTC, ADC, DAC, Timers, PWM and MCPWM integrated
6463 - Add support for seek-able streams.
6467 - Restructured network directories, header files, and naming to
6468 better modularize the networking and to better integrate the
6473 - prun: An NSH built-in application that can be used to run
6474 Pascal P-Code programs either programatically or from the NSH
6476 - netpkt: A "raw" socket test from Lazlo Sitzer.
6477 - hex2bin: A library and built-in task to convert from
6478 …Intel HEX to binary format. It can write the binary data to a file or it can store the binary dat…
6484 - Dynamic Loader: Fix an error in a symbol table search function.
6486 - Dynamic Loader: Fix a critical error in exec(); argv was not
6488 - mq_notify: Test for a valid signal number was inverted; this
6491 - Fix typo in conditional compilation: CONFIG_CLOCK_MONOTONIC vs.
6496 - Fix typos in several RGB conversion macros.
6500 - Modify TCP timout handling to provent situations where connections
6502 - Improved TCP fallback allocation logic from Max Holtzberg. Also,
6503 fallback mechanism is disabled when SO_LINGER is to prevent
6505 - Write Buffering: Add checks from buffer allocation failures. From
6510 - webserver: httpd_fs_open() should return OK on success and ERROR on
6515 - Make sure that all references to up_prioritize_irq() are
6517 - CC3000: Correct SPI mode for CC3000 is CPOL=0 CHPA=1. From Jussi
6519 - CC3000: Fix a race condition in thread start-up logic. From Jussi
6521 - CC3000: Additional fixes including a compilation failure if POLL is
6526 - CDC/ACM and PL2303 device: Reset RX head to avoid resending last
6527 serial data when USB cable disconnected/re-connected. From
6532 - The Nucleo-F401RE has no on-board crystals and, hence, needs to run
6533 with the PLL input from the on-chip HSI clock.
6537 - Serial: Handle configuration for the case of 8-bit data with
6542 - There was a cloned error in all SAM3/4 board configurations (and
6550 - Fix some critical typos in the SAMA5D3 DMA definitions.
6554 - I2C: Add an alternative I2C implementation for the STM32 F103 that
6556 - RTCC: Add retry logic to RTC initialization. It sometimes takes
6557 longer for the RTC to initialize, at least as noted on an F2 part.
6562 - GPDMA: Fix an error when DMA is started: The read-modify-write
6565 transfers to do; on read it is the number of transfers completed).
6570 - snprintf(): If the size passed to snprintf() is zero, then
6572 buffer needed to hold the entire string. From Sami Pelkonen.
6576 - The alternate console device CONFIG_NSH_CONDEV must not be defined
6581 - Many files: Convert all old-style GCC variadic macros to the C99
6585 - tools/configure.sh: In-place SED edit messes up permissions on
6590 - tools/mkfsdata.pl: Apparently, the trailing the 0x00 in http
6596 - I2C Tool: Fix to show the updated register address on each
6599 - CLE was not returning the terminating newline character. But
6602 NuttX-7.4
6603 ---------
6607 that release consists of two tarballs: nuttx-7.4.tar.gz and
6608 apps-7.4.tar.gz. Both may be needed (see the top-level nuttx/README.txt
6615 - Beginnings of a crypto/ subsystem from Max Neklyudov
6616 - Tickless operation: NuttX now supports a mode with no periodic
6618 timer. This (1) lowers the rate of interrupt processing to timer
6622 - Restructured the OS files under sched/ to better support the already
6627 - Substantial directory and header file reorganization and renaming to
6629 - Add network device ioctl to access PHY registers. From Daniel Lazlo
6634 - Various changes associated with symbol tables from Pelle Windestam.
6638 - colorcmp(): New utility to compare two colors.
6639 - The initial background color is now configurable. Includes logic to
6640 eliminates multiple background updates to get the right color.
6641 - Minor configuration changes to handle mouse X/Y and touchscreen
6646 - SmartFS: Increase some variables from uint16_t to uint32_t to handle
6648 - Add configurable AES encryption support to the block-to-character
6649 (BCH) driver. This allows any block device to be accessed as an
6651 - Add an MTD layer that will add read-ahead or write buffering to any
6653 - Automounter: Add support for an auto-mounter that will automatically
6658 - WM8904 audio CODEC driver.
6659 - PCM .WAV file decoder. Fast forward implemented with sub-sampling
6661 - Add a NULL audio device that can be used to simply unit-level testing
6663 - Audio subsystem now supports interfaces for fast-forward and rewind
6669 - MTD: Extend erase block size to 18-bits in order (decrease block
6670 size to 14-bits) to handle parts with large erase blocks. From Kosma
6672 - maxTouch: Add support for the Atmel maXTouch touchscreen controller.
6676 - Provides the timers needed to support the Tickless mode of operation.
6680 - Add SAM4CM IPC register header file. From Max Neklyudov
6681 - Various fixes PMC and clock configuration for the SAM4CM port from
6686 - SAM4 AES driver. Contributed by Max Neklyudov
6690 - Add logic to redirect all SAMA5D4 interrupts to the AIC
6691 - Add a configuration option to reserve DRAM for a framebuffer when
6693 executing out of NOR, but needs to work a little differently in
6695 - Add SAMA5 slow (32.768KHz) clock support.
6696 - Add support for the ARM L2CC-PL310 L2 cache. The system runs with
6698 I suspect that the memory timing configuration for L2CC needs to
6700 - Provides the timers needed to support the Tickless mode of operation.
6704 - XDMAC-based HSCMI driver for the SAMA5D4
6705 - Adapt the SAMA5D3 LCDC driver to work with the SAMA5D4 which has
6707 - PIO: Add a new interface sam_pio_forceclk() that can be used to
6710 - TWI: Now supports the up_i2creset() method.
6711 - TWI: Use sam_pio_forceclk() so that we can read the current state
6712 of an open-drain output in the TWI reset logic.
6713 - SSC: SCC Frame Synch Delay and Start Delay are now configurable.
6714 - PCK: Add the slow clock and the main clocks as options for the
6716 - Timer/Counter: Can now handle non-constant BOARD_MCK_FREQUENCY. Also
6717 now supports methods to attach client interrupt handlers
6718 - One shot and free-running timers. These are wrappers around the low
6719 level timer/counter logic to provide one-shot and free-running
6720 timers. These were developed to support the Tickless operation, but
6725 - Add a boot loader that runs from ISRAM and loads an Intel HEX file
6727 - Add a configuration that will load a bootloader into AT25 Serial
6729 - SAMA5D4-EK NSH configuration supports many more features: RTC, HSCMI
6733 - SAMA5D4-EK: Add an NxWM configuration using the TM7000 LCD with
6734 the maXTouch multi-touch touchscreen.
6735 - SAMA5D4-EK NxWM: Uses new, larger icons in configuration instead of
6737 - SAMA5D4-EK NxWM: The NxPlayer and audio system are now enabled in
6739 device). The automounter is used to automatically mount media
6741 - SAMA5D3x-EK: Add a configuration to support the command line
6742 NxPlayer and to verify the WM8904 CODEC driver.
6746 - Add support for the STM32F103RC and RD. From Kosma Moczek
6747 - Add a procfs entry to show the state of the CCM heap usage.
6752 - Unconfigure GPIO pins when closing a serial port to prevent back
6753 effects from back-powering on the TX pin. From Kosma Moczek
6757 - ADC: Added burstmode ADC conversion mode, with CONFIG_ADC_BURSTMODE
6759 - Ethernet: Added option to use the kernel worker thread to do most of
6761 - Ethernet: Critical bugfix: From time to time (after some hours) the
6768 - mbed: Port ADC, DAC, and PWM logic from the configs/zkit-arm-1769.
6770 - mbed: Eliminated a problem with PHY DP83848C : it doesn't need a
6775 - Adds support for localtime. From Max Neklyudov
6779 - Make variable definitions 'static const' when possible to save RAM
6784 - sysem/mdio: New PHY tool from Daniel Lazlo Sizter.
6785 - NSH: Networking logic modified to handler the case of SLIP
6787 - NSH: Add a configuration to use a USB keyboard for the stdin
6789 - NSH: Software assigned MAC address is now configurable. From Lazlo.
6790 - NSH: Also add an option to let platform-specific logic select the
6792 - NSH: There is now a configuration option that will bring up the
6793 network on an separate thread. Since the network bring-up is
6794 asynchronous, there are no serial console start-up delays due
6795 to the network negotiation time.
6796 - NxPlayer: Changes to integrate with Ken's NxWM::CMediaPlayer.
6797 - NxPlayer: Add interfaces for fast-forward and rewind needed by
6800 - NxPlayer: Supports new way of identifying the end of the audio
6802 - Sudoku: Add a sudoku game.
6808 - NxConsole: Fix scrolling for the case of the framebuffer device. In
6815 - Important fix to the read-ahead buffer queue management: Consumed
6818 - Fix an error in SLIP escaping. From Max Neklyudov
6822 - Fix an include file ordering problem when CONFIG_NET_STATISTICS=y.
6823 - Move statistics from uip.h to new netstats.h to remove a circular
6825 - Various fixes for networking and tiny webserver from Max
6826 - webclient: Fix to offset calculation from Rony Xln. Prevents 0x0a
6828 - webserver: Fix some configuration usage issues. From Max.
6829 - webserver: Missing logic to close sockets on loop termination.
6833 - SmartFS: Fix for a bug that would show up if CONFIG_MTD_BYTE_WRITE
6840 - Change how the end of the audio stream is detected by the leaf audio
6841 component. This used to be done by looking for the first partial
6842 buffer. That does not work with the in-place sub-sampling performed
6844 that all buffers only partially filled by the time they get to the
6845 leaf. Now, a flag is set in the audio buffer flags set to indicate
6850 - RAMLOG putc() method needs to set the errno and return EOF on a
6852 - Add missing configuration option to select the MAX11802 touchscreen
6857 - Fix logic in conversion of physical and virtual DRAM addresses when
6860 - Critical SAMA5D3 and 4 bug fix: PIO clocking must be enabled for
6865 - OHCI: Fix an error in a DEBUGASSERT statement. Caused an
6866 assertion to fire inappropriately when a low- or full-speed device
6868 - OHCI: Pointers to allocated port values were not being
6870 to fire when debug was enabled
6871 - SSC: Needs to account for data offset in audio buffer
6873 * ARMv7-M:
6875 - Correct the initial value of the BASEPRI register. This was
6880 - I2C: Fix missing configuration of GPIO pins in I2C driver. Fix
6882 - STM32 OTGFS device: Various changes to try to reduce that amount of
6888 - Ethernet: Wrong bits being cleared before OR-ing in new settings.
6889 - Ethernet: Fix an error in the function that determines the number
6892 - I2C: Test for read or write operation was reversed. How could
6897 - SAM4S Xplained-Pro: Correct description of LEDs and usage. From
6902 - PIO: Fix definitions that could disable PIO interrupt support if only
6904 - PIO: Macro SAM_PION_VBASE is not define-able for the SAMA5D4 and must
6906 - PIO: Fix a typo in Schmitt trigger configuration; Configure pin as a
6907 vanilla input first so that final pin configuration is more read-able
6908 (i.e., easier to debug)
6909 - PIO: Logic for Schmitt trigger selection backward
6910 - SAMA5D4: Correct system timer frequency. Input clock is MCK/2, not MCK.
6914 - Ethernet: Wrong bits being cleared before OR-ing in new settings.
6915 - Ethernet: Fix an error in the function that determines the number
6918 - HSMCI: The 8-byte SCR transfer was failing silently with the DMA
6920 a non-DMA read transfer mode.
6921 - HSMCI: Fix a problem on card insertion/removal callback handling.
6924 some not-so-good behaviors. The solution is to perform all
6929 - PIO: Fix some cloned errors in SAM GPIO interrupt setup
6933 - Ethernet: Comment out an assertion that is reported to fire
6938 - stdint.h: Correct naming of [U]INT_LEASTn_{MAX|MIN} and
6940 - unistd.h: POSIX definitions should be defined to a value. rom Kosma
6942 - Fixes associated with rint() and related interfaces in the math
6947 - NAME_MAX not available on SunOS; use FILENAME_MAX or MAXNAMELEN.
6952 - NSH: if # appears on line, need to comment ignore additional
6954 - NxPlayer: Check for file read errors and end-of-file with zero
6956 - NxPlayer: NxPlayer needs to set curbyte field to zero before
6960 NuttX-7.5
6961 ---------
6965 that release consists of two tarballs: nuttx-7.5.tar.gz and
6966 apps-7.5.tar.gz. Both may be needed (see the top-level nuttx/README.txt
6973 - Watchdog Timer Allocation: (1) If we run out of pre-allocated
6975 from the heap. A reserve of pre-allocated watchdog timers is
6979 - Address Environment Support: (2) New OS APIs integrated into all
6980 platform-specific context switching logic (up_block_task(),
6982 - Kernel Build Support: (1) The MPU based "kernel build" renamed to a
6984 new MMU-based "kernel build" (CONFIG_BUILD_KERNEL), (2) The system
6987 - System Startup: Add configuration options to start the system from
6989 - Startup Parameter Passing. There used to be two ways to pass
6990 parameters to new tasks, depending upon the configuration: Either
6996 - Board Initialization: Add capability to perform initial board
6999 the start-up/IDLE thread. That is because blocking or waiting is
7004 - Granule Allocator: (1) Add a new function to reserve un-allocatable
7005 regions in the granule heap. (2) Add interfaces to support
7006 un-initializing a granule allocator.
7007 - Page Allocator: Add a simple physical page allocator based on the
7011 - Remove CONFIG_MM_MULTIHEAP. Non-multiheap operation is no longer
7013 - sbrk(): sbrk() is now supported in the kernel build to permit
7014 dynamically sized, per-process heaps.
7015 - Per-Process Heaps: Space at the beginning of the process data space
7018 use code in order to allocate user-specific data.
7019 - User Heap Management: When a privileged thread exits, we have to
7020 use the kernel allocator to free memory; when an unprivileged thread
7021 exits, we don't have to do anything... heap memory will be cleaned
7023 - Inter-Process Shared Memory Support: (1) Add implementation and
7025 Add system system calls to support the user call gate to the shared
7026 memory interfaces. (3) Add platform-specific interface definitions
7027 needed to support the shared memory feature.
7028 - Virtual Page Allocator: Add support for a per-process virtual page
7032 used by shmat() and shmdt() to pick the virtual address onto which
7033 to map the shared physical memory.
7037 - SMART FS and SMART FS procfs updates from Ken Pettit.
7038 - The MTD Read-ahead/Write buffer layer appears is now functional.
7042 - Add logic to initialize the per-process user heap when each user
7047 - Change all occurrences of NxConsole to NxTerm.
7051 - PHY Interrupts: (1) Standardize a PHY interrupt attachment
7052 interface. (2) Add support for an ioctl that can be used to notify
7055 - Improved Send Logic: In the past, the first packet send to a new
7060 send ARP requests periodically to get the mapping and (3) wait for
7063 with the first packet sent to a new peer, but the packet should not
7068 - Emulated SPI FLASH driver for the sim target from Ken Pettit.
7072 - The default host is now x86_64 and the -m32 option will be
7077 - Removed all support for the 8051 family architecture from the NuttX
7081 any really successful ports of NuttX to any 8051, and (2) the 8051,
7082 with its hardware stack, forces limitations and complications to the
7088 - configs/16z: Support for this board has been removed from the NuttX
7090 directory). This port is not ready for usage but may return to the
7095 - SAM4E-EK: Add (1) a fully-functional ILI9341-based LCD driver and
7096 (2) a fully-functional NxWM configuration.
7098 * ARMv7-A:
7100 - Address Environments: Add support for application address
7101 environments using the Cortex-A MMU. Implement standardized
7102 platform-specific interfaces of NuttX address environment
7104 - Cache Operations: Implement standardized, platform-specific cache
7105 operations. These are called from the ELF loader in order to flush
7106 D-cache and invalidate I-cache after an ELF module has been loaded
7108 SAMA5/Cortex-A platform.
7109 - Kernel Build: (1) Add implementations of system call gate. (2) Add
7110 CRT0 start-up file that can be linked with separately built user
7111 programs. (3) Add support for delivery of use-mode signals in the
7112 kernel build. (4) Add logic to initialize the per-process user heap
7113 when each user process is started. (5) ARMv7-A exception handling
7114 needs to work a little differently if we support user mode
7117 - Shared Memory Support: (1) Add logic necessary to handle remapping
7119 address conversions to include addresses in shared memory. (3) Add
7120 implementation of platform-specific shared memory support.
7124 - Implement all network ioctls, including the new ioctl to setup PHY
7126 - In kernel build with address environment, need logic to map user
7127 virtual addresses to physical addresses, and vice versa.
7131 - SAMA5D3 Xplained, SAMA5D3-EK, and SAMA5D4-EK: Convert existing
7132 board specific PHY interrupt interfaces to use newly defined
7134 - SAMA5D4-EK: Add a configuration for testing the kernel build
7135 configuration. There are configurations to boot either from an SD
7136 card or from and in-memory ROMFS file system.
7137 - SAMA5D4-EK: Add documentation/support for Rev E. board.
7141 - Ethernet: Modified to support the change to the network ioctl
7142 signature changes. Also add support for new ioctl to setup PHY
7147 - STM32F4Discovery with STM32F4DIS-BB: Add a network enabled NSH
7148 configuration for the STM32F4Discovery board with the STM32F4DIS-BB
7150 the STM32F4DIS-BB base board.
7154 - Add support for the TI CC3200. From Jim Ewing.
7158 - Add support for the TI CC3200 Launchpad. From Jim Ewing.
7162 - Re-implemented poll() delay using sem_timedwait().
7166 - Export Target: In the kernel or protected builds, (1) only the user
7169 needs to bundle up the user C startup file (crt0), not the kernel
7171 - Add logic that will permit us to build user libraries with different
7173 -fno-common option when building ELF code to prevent SHN_COMMON
7178 - NSH: Extend the NSH network initialization logic. There is now an
7181 attempt to gracefully put the Ethernet driver in a down state; When
7182 the link comes back, the code will attempt to bring the network back
7184 - ELF Example: The ELF test/example has been extended so the
7186 (if it is available) or against the C library to eliminate or
7188 - Change all occurrences of NxConsole to NxTerm.
7189 - MTDRWB Example: Add an example to test MTD R/W buffering.
7190 - OS Test Example: Add a trivial test of sem_timedwait.
7194 - Import Target: (1) Add logic that will allow building applications
7196 Add .config file to export package. (3) Create apps/import. Create
7198 requires -fno-common in CFLAGS. Copy some base logic from
7199 nuttx/tools/Config.mk to apps/import/Make.defs. (4) Add
7200 apps/import/scripts/gnu-elf.ld GCC linker script for ELF import
7202 - All Makefiles: (1) Add an install target to all makefiles. For
7203 the import build, the top-level Makefile now does two passes: (1)
7209 - All Built-In Programs: With kernel build (CONFIG_BUILD_KERNEL),
7210 entry point to all tasks is main(), not some xyz_main().
7211 - NSH: Several commands must be disabled in the kernel build because
7214 - apps/tools/: (1) Add mkimport.sh to expload an NuttX import package
7215 and install in apps/import. (2) Add mkromfsimg.sh script to create
7217 - ELF and NxFLAT Examples: Do not build test cases that use
7222 - refresh.sh: Add a tool to make refreshing configurations easier
7223 when you want to do a lot of them.
7224 - mksyscall.c: Build syscalls that do not need header files.
7225 - mkexport.sh: Add .config file to export package.
7226 - See above for new apps/tools scripts.
7229 implemented but present in this release. They are not likely to be
7233 realization of Unix-style user processes in NuttX. There is more to
7247 - Kernel build fixes: (1) IDLE TCB setup needs to indicate that the
7252 - Several pthread interfaces: Add const storage class to phthread
7254 - sched/clock: Remove vestiges of g_tickbias; need, instead, to apply
7255 time bias to g_basetime in order to provide the correct system time.
7256 - System Calls: (1) Several typos fixed; corrected integration of
7258 If we are configured to use a kernel stack while in SYSCALL handling,
7259 then we need to switch back to the user stack to deliver a signal.
7263 - procfs: Fix some procfs breakage introduced by reorganizing some
7264 non-reorganizable data structures. From Ken Pettit.
7265 - AT45: In at45db_bwrite , the buffer is not increased when writing
7270 - ELF relocations. Some relocation types do not have a named symbol
7272 - ELF Loader: Critical bugfix.. BSS was not being cleared.
7276 - Granule allocator initialization uses wrong allocator to setting
7278 - Add a flag to group structure: If the group is created by a kernel
7283 - crypto/cryptodev.c: Path segments reversed in include file path. Noted by Brennan Ashton.
7287 - Common CAN upper-half: In can_txdone, waiters on the semaphore
7289 it returns -EIO if there are no new packets, and second the
7295 - System Calls: Fix a typo in system call when fetching parameter from
7300 - STM32 F401 UART: Correct support for USART6 on this chip. From
7302 - STM32 FLASH fixes: use size_t instead of uint16_t, make interface
7304 - Fix for UART7 and UART8 on STM32 clock enable from Aton.
7305 - CAN: At the end of the interrupt handler, the interrupts were being
7309 packets to send. Removed the block altogether, because can_txdone
7311 to send. From Daniel Lazlo Sitzer.
7312 - Additional STM32 CAN correction suggested by Max Holtzberg.
7316 - configs/mikroe-stm32f4: Fix a few compile bugs and minor corrections
7317 to the mikroe-stm32f4 configuration source. From Ken Pettit.
7319 * ARM9/ARMv7-A:
7321 - System Calls: Fix ARM7/9 and Cortex-A SYSCALLs: For threads in SVC
7324 - Task Setup: All tasks, even user mode tasks, must start in
7325 supervisor mode until they get past the start-up trampoline.
7326 - ARMv7-A: Modify up_fullcontextrestore() for CONFIG_BUILD_KERNEL.
7330 modification to up_fullcontextrestore() that could have been done:
7331 It might have been possible to use the SPSR instead of the CPRSR and
7337 - SAM3X/Arduino Due: Fix typo in sam3x_periphclks.h; add SCLK
7338 definitions to board.h header file. From Fabien Comte.
7339 - SAM3 RTT: Only SAM4 family has RTTDIS bit in the MR register.
7344 - sscanf(): NuttX libc tried to guess how many characters to parse,
7346 That guess was often wrong. A better approach would be to call
7348 to determine how many characters to skip after parsing. From Kosma
7350 - Corrected atan2 implementations from Denis Arnst.
7351 - Change to lib_dtoa() to fix precision error from trailing zeroes.
7356 - Fix NSH PS command: If there are no arguments, it could print
7361 - Null Example: Need to include config.h it order know if this is or
7363 file that may need to define main().
7365 NuttX-7.6
7366 ---------
7370 that release consists of two tarballs: nuttx-7.6.tar.gz and
7371 apps-7.6.tar.gz. Both may be needed (see the top-level nuttx/README.txt
7378 - Moved name semaphore and message queue support out of the OS and
7384 - Add SIGPOLL for use as part of the AIO implementation.
7385 - Remove CONFIG_MAX_TASK_ARGS configuration. There is now no
7387 to a new task on start-up.
7391 - Add support for priority inheritance on the low priority worker
7393 priority of the low priority worker thread(s) will be boost to the
7398 - Add support for multiple low-priority work queue threads. This
7399 allows individual worker threads to block indefinitely for I/O as
7404 - Implement create() (as a macro).
7405 - Add pread() and pwrite(). Also added pread() and pwrite()
7407 - AIO: Add aio_read(), aio_write(), aio_return(), aio_error(),
7410 features also added to the low priority work queue with this
7412 to adjust the priority of the worker thread according to the
7414 - Implement standard syslogmask() to control logging (also removing
7415 the non-standard syslog_enable()).
7419 - Extend MTD support to the M25P16. From S�bastien Lorquet.
7423 - BCH (Block-to-Character): Add support for seeking in BCH. From
7426 * Graphics Support/Graphics-Related Drivers:
7428 - Add support for a generic ILI9341 LCD driver. From Marco Krahl.
7429 - Add ANSI/VT100 foreground and background color commands.
7430 … - Add driver for ST7565 LCD that works with NHD-C12864KGZ display. From Pierre-noel Bouteville.
7434 - Verify that multiple networks can be supported.
7435 - Add support for the case where there are multiple networks: One
7439 vary, and (3) different MTUs and TCP receive windows may be used
7441 - Extensions to UDP and TCP connection structures for the case of
7442 multiple networks. In this case, assigned port numbers only have to
7443 be unique with respect to the IP address. So, for example, you
7448 - Removed the old, strange up_stdio.c and implemented a simulated UART
7449 driver to provide the console input. The new logic starts a
7450 separate, Linux domain pthread to read the console input in raw mode
7451 and provides the incoming data to NuttX via standard NuttX domain
7453 - Add support for 64-bit longjmp/setjmp in simulator platform. This
7454 will permit operation of the simulation natively on a 64-bit
7457 * ARMv7-M:
7459 - Add ARMv7-M CMSIS ITM header file and library. From Pierre-noel
7461 - Add ARMv7-M CMSIS DWT and TPI header files. From Pierre-noel
7463 - Add ARMv7-M support to use ITM for SYSLOG debug output. Includes
7464 logic from Pierre-noel Bouteville.
7468 - Add support for SAM3/4 basic serial TERMIOS and flow control.
7474 - SAM4E-EK: Add support for PHY interrupt.
7478 - SAMA5D3-Xplained: Add a configuration that provides a simple test
7480 - SAMA5D4-EK: Add a configuration that provides a simple test for the
7485 - Add an I2C header file for the Freescale KL family. From Alan
7490 - Add support for tickless operation using the NXP LPC43xx. From
7495 - Add a basic port for the SiLabs EFM32 family. Includes many files
7496 contributed by Pierre-noel Bouteville .
7500 - Add board support for the EFM32 Gecko Starter Kit.
7501 - Add board support for the Olimex EFM32G8809128 STK. NOTE: I am
7502 unable to test this configuration due to tool-related issues.
7503 - Add board support for the SiLbas EFM32GG Giant Gecko Starter kit.
7507 - Add support for the STM32 F411RE from Serg Podtynnyi.
7508 - Add support for the STM32F103RG. From Murilo Ponte.
7512 - STM32 F4: Add logic that implement true high speed support for the
7519 - STM32 Nucleo-F411RE: Extend this board configuration to also support
7520 the Nucleo-F411RE. From Serg Podtynnyi.
7521 - Add support for the STM32F429i Discovery's LCD (SPI based). From
7523 - configs/stm32f100rc_generic: Removed this generic board configuration.
7524 I have decided to stop support of generic board configurations. Generic
7531 - Add a mostly bogus wchar.h header file. This file is mostly bogus
7535 - Add isatty() function. From Alan Carvalho de Assis.
7536 - Add mktemp(), mkstemp(), tmpnam() and tempnam().
7540 - Add a PRELINK macro to Config.mk. From Kriegleder.
7541 - compiler.h: Defines inline functions as not instrumented - this is
7546 - apps/interpreter/bas: Added in the Michael Haardt's BAS 2.4 adapted
7549 - Examples: Added bastest/ which holds a special version of Michael
7552 - Examples: Add a simple UDP relay bridge for testing configurations
7553 with multiple networks. Includes a host-side test driver for
7555 - Netutils: Add implementation of timeouts for the netutils webclient.
7557 - NSH: Add support for a custom NSH ROMFS startup image header file
7559 - OS test: Add a simple test of named semaphores.
7560 - OS test: Add AIO test case in OS test.
7563 implemented but present in this release. They are not likely to be
7567 realization of Unix-style user processes in NuttX. There is more to
7583 were be disabled but never re-enabled, and errors in the Tickless mode of
7584 operation. My thanks to the developers of cppcheck! I am impressed!
7588 - vfork(): Now that arguments are kept on the stack, the way that
7589 arguments are passed from parent to child in vfork() must change.
7592 - vfork() problem: If we get to vfork() via system call, then we
7593 need to clone some system call information so that the return form
7595 - Fixes to tickless operation code, especially in alarm mode. From
7597 - Fix an important bug in the watchdog timer creation logic.
7598 - Calling mq_timedreceived() with immediate timeout was getting stuck
7600 timeout value to past time, for example abstime={ .tv_sec=0,
7601 .tv_nsec=0 }. However absolute time was converted to relative time
7604 Change corrects clock_abstime2ticks() to return negative ticks, if
7609 - Fix a place in the memory manager where it explicitly assumed that
7613 - Granule Allocator: If the INTR granule allocator mode is enabled,
7614 there is no semaphore to destroy. From Lorenz Meier.
7618 - Network routing: I don't think that the net_route() function has
7621 - Move and rename IP header flag definitions. The problem fixed here
7622 is that there IP header flag definitions were not available when TCP
7624 - Network routing: Refuse to perform routing table lookups for the
7626 - Network routing: Add logic to netdev_findbyaddr() to return the
7634 - NXFFS Dump: Fix problems with redefinitions of fdbg macro. With the
7635 fix to the syslog prototype, a LOG priority must now be the first
7639 - poll() was not waking up from signals (for example mq_notify()
7641 - poll(): Add proper handling for sem_timedwait errnos. From Jussi
7643 - include/nuttx/fs/fs.h: Fix typo in conditional compilation. From
7646 * Graphics/Graphic-Related Drivers:
7648 - Remove warnings when CONFIG_NXTK_BORDERWIDTH is set to zero. From
7649 Pierre-Noel Bouteville.
7653 - Make standard syslog and vsyslog POSIX compliant (also modify
7654 non-standard syslog functions for compatibility).
7655 - R/W buffering: Fix typo that can cause compilation error.
7659 - SAM4S: Add missing SPI0 clock configuration macro for the SAM4S. From spasbyspas.
7663 - SAM4E-EK: Fix an error in a USART1 pin number.
7667 - SAMA5DF4: Fix several typos that will prevented EMAC1 from
7672 - Fixes to allow compile of lpc43_gpioint.c. From Brandon Warhurst.
7676 - Add missing ADC pinmap definitions for the STM32 F103R from Martin
7681 - STM32 EXTI: Correct STM32 RTC EXTI bit definition. From Lazlo.
7682 - STM32 IWDG, WWDG, DBGMCU: Fix watchdog stop bit usage. From Lazlo.
7683 - STM32 OTGFS: Correct a typo in the STM32 OTGFS register bit definitions.
7687 - ARM up_internal.h: Add protection from C++ name mangling in the
7692 - PIC32MX7: DEVCFG0 bit 2 must be set. Writing bit 2 as zero can
7697 - The implementation of access() as vararg macro has the issue that
7702 - The definition of strncpy() is that empty space should be zero-
7706 - limits.h: Remove the definition of INT_FAST32_MIN which is already
7711 - apps/: Correct everything under apps to use the corrected syslog
7712 interfaces. Remove any non-portable uses of syslog.
7713 - NSH: Fix ls -l output for regular files.
7714 - NSH: Fix reversed in/out file closing in DD command when an error
7716 - NSH: Add logic to restart the console wait if an error occurs
7718 must be able to open the USB serial and receive 3 newlines.
7722 - Netutils: Fix memcpy of host address in netlib_gethostaddr(). From
7724 - Netutils: If you make a DNS request before the DNS address it would
7728 - Netutils: Fix md5 hashing when digest[$i] islower that 16. From
7730 - Stack Monitor: Fix compile problems introduced when the syslog()
7733 - Examples: Update NxTerm makefile for kernel-build issues. From
7735 - Examples: Fixes to keypadtest from Pierre-Noel Bouteville.
7736 - Examples: These examples all set the IP address of eth1 but the
7740 NuttX-7.7
7741 ---------
7745 that release consists of two tarballs: nuttx-7.7.tar.gz and
7746 apps-7.7.tar.gz. Both may be needed (see the top-level nuttx/README.txt
7753 - Task exit handling: Add logic to clean up after task_delete() or
7754 pthread_cancel() if the task happens to be waiting on a semaphore
7756 - Stack coloration: Removed CONFIG_DEBUG_STACK and replaced it with
7762 - Discrete joystick driver: Added an interface definition and upper
7765 - Analog joystick driver: Added an interface definition and upper
7768 - Add driver support for the ADXL345 accelerometer. From Alan
7770 - Generic serial driver: Add watermark levels to the serial RX flow
7771 control logic. Modify the rxflowcontrol method to accept the number
7777 - Add procfs write support. From Ken Petit.
7778 - Implemented wear-leveling in the SmartFS. From Ken Pettit.
7779 - MMC/SD Interface: MMCSD SDIO: Add support for a new
7780 SDWAIT_WRCOMPLETE condition. The previous logic used a busy-wait
7781 loop to poll the card R1 status to determine when the card was
7782 ready for the next transfer. That busy-wait can be quite long --
7783 up to hundreds of milliseconds. An alternative is to look the SD D0
7785 change avoids the busy-wait poll by reconfiguring the SD D0 pin as a
7786 GPIO interrupt, then waiting for the card to become ready without
7791 - Add support for a generic EEPROM driver that accesses EEPROM as a
7796 - Many new fonts converted for use with NuttX and added by
7797 Pierre-noel Bouteville
7801 - IPv4 support is now conditioned on CONFIG_NET_IPv4.
7802 - Implemented and verified IPv6 support conditioned on
7803 CONFIG_NET_IPv6. Either IPv4 or IPv4 or both may be selected.
7804 Sockets, of course, must be bound to one or the other. Added support
7805 for IPv6 ioctls to manipulate IP addresses.
7806 - Integrated support for ICMPv6 and the ICMPv6 Neighbor Discovery
7807 Protocol and ICMPv6 ECHO request/reply needed to support ping logic.
7808 - All Ethernet drivers: Modified to support. Most, however, are
7812 - Also added missing raw/packet socket support to all Ethernet drivers.
7816 - Add a configuration build and test the Traveler first person game
7818 - Add an X11 mouse-based simulation of an analog joystick device
7822 - Add analog Joystick shield support for the SAMA5D3 Xplained board.
7826 - Add GPIO interrupt capability for the KL architecture. From Alan
7831 - Freedom-KL25Z: Add board support for the ADXL345 accelerometer. From
7833 - Freedom-KL25Z: Update the Freedom KL25Z board CC3000 support to use
7838 - A port of NuttX to the LPC4357-EVB from Toby Duckworth. This port
7839 is a leverage of the LPC3330-Xplorer port and still have a some
7840 misinformation from that port that needs to be updated for the
7841 LPC4357-EVB.
7845 - Serial: Add support for serial termios TCGET and TCSET. For the
7846 moment, only set/get speed is implemented. From Pierre-noel
7848 - RMU: Add support for the EFM32 reset management unit (RMU). From
7849 Pierre-noel Bouteville.
7853 - Add support for timer/PWM on the EFM32GG. From Pierre-noel
7858 - Enable support for the STM32 F102. From the PX4 team.
7862 - STM32 F429 LTDC: Add interface to perform hardware accelerated layer
7863 operation. Provides access to a reference of a specific ltdc layer.
7865 - STM32 F429 LTDC support: Implemented LTDC framebuffer support for the
7866 generic nuttx framebuffer interface. Also implements the interface to
7869 - STM32: Add support for the internal low speed clock (LSI) as a
7871 32kKhz oscillator installed, for those boards we must fallback to
7873 - STM32 SDIO: Add support for the new SDWAIT_WRCOMPLETE condition.
7878 - Add a discrete Joystick support for the STM3210E-EVAL.
7879 - Add analog Joystick shield support for the Nucleo F4x1RE boards.
7880 - STM32 F429i-Disco: Add support for initializing of the ltdc
7881 controller and the lcd device connected on the stm32f429i-disco.
7883 - Removed the px4-v2_upstream configuration. This was not the
7884 official configuration for the PX4 board and has led to confusion
7886 maintenance and customization to support ongoing PX4 testing and
7892 - Add support for the TI Tiva TM4C 129X family. Some unverified
7897 - Added support for Tiva I2C driver. Verified on the Tiva TM4C123G
7899 - Added a Tiva TM4C129X Ethernet driver.
7900 - Add a timer library for generic support of Tiva timers
7901 - Add a driver lower half for drivers/timer.c. Only 32-bit periodic
7902 timers are supported. This provides userspace access to timers.
7906 - TM4C123G Launchpad: Add initialization logic for an external AT24
7907 EEPROM. This is intended only to support testing of the Tiva I2C
7909 - Board support for the Tiva DK-TM4C129x Connected Development Kit.
7910 - DK-TMC129X: Add an IPv6-enabled NSH configuration.
7914 - Added support for a variadic ioctl() function. The ioctl()
7915 interface is a non-standard, Unix interface. NuttX has always used
7916 the older, three-parameter version. Most contemporary systems now,
7918 option to insert a shim layer to adapt the three-parameter ioctl()
7919 to use the variadic interface form. Internally, the ioctl handling
7920 is the same three-parameter logic. The only real complexity to the
7922 - Added sys/custom_file.h. Used when CUSTOM_FILE_IO is define and
7923 avoids re-definition errors about the FILE define. From Thomas
7925 - Add CRC8 support to the C library. From Ken Pettit.
7926 - math.h: Added support for the expm1 functions. From Brennan Ashton
7930 - apps/examples/djoystick: Add a test of the discrete joystick
7932 - apps/examples/ajoystick: Add a test of the analog joystick
7934 - apps/examples/ltdc: Add ltdc test example. From Marco Krahl
7935 - apps/system/lm75: Add a tiny application to read the temperature
7936 from an LM-75 (or compatible) temperature sensor
7937 - apps/examples/timer: Add a trivial test of the timer driver
7939 - apps/system/cu: Add a minimalist implementation of the 'cu'
7942 leave the terminal program and drop back to nsh. This might come
7944 other devices with text based serial communications attached to
7946 - apps/interpreters/micropython: A port of Micro Python to NuttX.
7949 - apps/netutils/dnsclient: Can select to be either IPv4 or IPv6, but
7951 - apps/netutils/netlib: Add new library functions to manipulate IPv6
7953 - apps/examples/nettest: Update test so that it can be used to test
7954 IPv6 TCP sockets
7955 - apps/examples/udp: The UDP test example has been extend to support
7958 - apps/nshlib: Add logic to initialize IPv6 addresses
7959 - apps/nshlib: Add the ping6 command to support checking IPv6 networks.
7960 - apps/nshlib: Clean up network status presentation for IPv6
7963 implemented but present in this release. They are not likely to be
7966 * IPv6. While basic IPv6 support was completed in NuttX-7.7,
7971 realization of Unix-style user processes in NuttX. There is more to
7987 - POSIX message queues: msg type should be char * not void * in
7989 Pierre-Noel Bouteville
7990 - POSIX message queues: In message queue creation return ENOSPC error
7991 if size exceeds the configured size of pre-allocated messages; Use
7992 ENOSPC vs ENOMEM per OpenGroup.org. From Pierre-Noel Bouteville.
7993 - Task Names: strncpy() will not copy the terminating \0 into the
7998 while CONFIG_TASK_NAME_SIZE is set to 8. From Daniel Willmann
8002 - Granule allocator: Fixes some issues found by the PX4 team using
8007 - Several fixes correcting issues with the CC3000 networking. From
8009 - CC3000 Fix: Data can be unaligned. When dereferenced as an input
8012 - Correct naming of fields in struct sockaddr_in6: sin6_port and
8014 - accept(): Correct the value returned by accept() in the case where
8015 net_lockingwait() is called. It was returning -1 and losing the
8020 - Loop device should return -EINTR is interrupted by a signal.
8021 - M25P serial flash driver: Add subsector size of the M24P16 part.
8023 - Common serial driver: In case a thread is doing a blocking operation
8029 arrive in the reader thread. The problem was fixed by re-
8032 - Pipes: Fixes some issues found by the PX4 team using Coverity. From
8034 - CDC/ACM driver: Fixes some issues found by the PX4 team using
8039 - LPC4357: Changes required to get USART 2 & 3 working on the
8040 lpc4357-evb. From Toby Duckworth.
8044 - Several fixes correcting issues with the STM32 header files from
8049 - Ported Tridge's STM32 I2C noise resilience logic from the PX4
8051 - STM32 F2 and F4: Set the GPIO_SPEED_50MHz on all F2 and F4 SPI pin
8053 is generalized to all SPI and all F2 and F4. Discovered and fixed
8055 - Fix for STM32 OTGHS device driver working in FS mode. From Ken
8057 - For STM32 OTG HS DEV (in FS mode): Disable ULPI clock enable in RCC
8059 FS mode, then the ARM never awakens from WFI due to a chip issue.
8062 - STM32 F429 LTDC: Add missing clut register definition. From Marco
8064 - STM32 serial: fix declaration and definition of up_receive() and
8065 up_dma_receive() to match fields in the interface definition of
8070 - Fix Tiva IRQ control logic; was limited to only 64 IRQs. That is a
8075 - avsprintf(): Fix a bug in usage of va_list on x86. On x86,
8076 va_list is a pointer to a single copy on the stack. avsprintf()
8079 the second call to lib_vsprintf() fails. This appears to be an
8081 - stdint.h: Don't use hex values to specify minimum values of fixed
8084 - strncpy(): Would trash a lot of memory if n == 0. From Yasuhiro
8086 - sscanf(). Accept %X and %F as well as %x %f as a format specifiers.
8091 - apps/examples/romfs: fix romfs example builtin app registry issue.
8093 - apps/system/cdcacm, composite and usbmsc: Fix some strangely placed
8095 - apps/netutils/telnetd: Add protection when CONFIG_SCHED_HAVE_PARENT
8100 - apps/nshlib/: NSH TFTP get command: Wrong file name used for the
8103 NuttX-7.8
8104 ---------
8108 that release consists of two tarballs: nuttx-7.8.tar.gz and
8109 apps-7.8.tar.gz. Both may be needed (see the top-level nuttx/README.txt
8112 This release is primarily a bugfix release for the NuttX-7.7 version that
8114 modifications in the NuttX networking to accommodate support for IPv6. This
8115 release follows close behind NuttX-7.7 in order to correct some the problems
8117 small number of new features and bug fixes unrelated to NuttX networking.
8123 - Tickless Mode: added limit of maximum delay that can be request
8130 - VFS Unlink: Add an unlink method to both the character and block
8132 unlinked and there are no open references to the driver, then the
8136 - Pipes and FIFOs: Implement the unlink method. If the pipe/FIFO is
8138 open references to the driver are closed, all of the driver
8140 - Added an option to use the syslog'ing device as the system console.
8141 This option enables a low-level, write-only console device at
8142 /dev/console (similar to the low-level UART console device). From
8143 Pierre-noel Bouteville.
8147 - RAM/ROM disk: Add logic to dispose of the driver and RAM buffer
8148 when the RAM disk has been unlinked and all open references to the
8149 RAM disk have been closed. Add new parameters to romdisk() to
8150 specify what should be done with the RAM/ROM buffer in this case --
8151 Should it be freed or not? Changed all calls to ramdisk() to use
8156 - Add support for local, Unix domain sockets. Support included for
8158 - UDP enhancement: Add UDP read-ahead support. In addition to
8160 enables support for for poll/select on UDP sockets and also non-
8162 - SLIP interface improvements. From Macs Neklyudov.
8163 - IPv6 Neighbor Solicitation: Added logic to support verification
8167 sent to a remote peer will fail (it would have been replaced with a
8169 - IPv6 Autonomous Auto-Configuration: Added support for sending
8171 local IPv6 address, mask, and router address are then auto-configured
8173 - IPv6 Router Support: Add logic to behave like a router (if so
8175 advertisement message in response to any received router solicitation
8178 - Optional IPv6 address filtering added to all Ethernet drivers for
8179 the all-routers multicast address.
8183 - Added architecture support for the Atmel AVR ATMega1284P MCU. From
8188 - Added support for the LowPowerLab MoteinoMEGA that is based on the
8193 - Add support for Tickless mode of operation for the SAM4CM platform.
8198 - Ethernet: The SAM4E Ethernet driver can now be configuration to
8200 reduces the amount of interrupt level processing to service Ethernet
8202 - SAM4E Ethernet: Add support multicast address matching and IPv6.
8206 - SAM4E-EK: The nsh configuration now configures the Ethernet driver
8211 - SAMA5D4 Ethernet: The SAMA5D4 Ethernet driver can now be configuration
8212 to perform all network processing on the work queue. This greatly
8213 reduces the amount of interrupt level processing to service Ethernet
8215 - SAMA5D3 and SAMA5D4 Ethernet: Add support multicast address matching
8220 - SAMA5D4-EK; Added a configuration to testing IPv6.
8221 - SAMA5D4-EK: Converted the nsh and ipv6 configurations to configure
8222 the Ethernet driver to use the work queue (vs. interrupt level
8227 - Add architectural support for the K26Z128VLH4 chip. From Derek B. Noonburg.
8231 - Add board support for the Freedom KL26Z board. From Derek B. Noonburg.
8235 - Ethernet: Add support multicast address matching and IPv6.
8239 - Add configurable option to unconditionally enable LE clocking. Even
8240 you don't use core clock LE as source for LFA or LFB, to read are
8242 should be enabled. From Pierre-noel Bouteville.
8246 - EFM32 RTC: RTC driver using BURTC. From Pierre-Noel Bouteville.
8250 - AES: Add driver for STM32L162XX AES peripheral. From Juha Niskanen.
8251 - Ethernet: The STM32 Ethernet driver can now be configuration to
8253 reduces the amount of interrupt level processing to service Ethernet
8255 - Ethernet: Add support multicast address matching and IPv6.
8259 - Added an IPv6 configuration for the STM32F4-Discovery board (with the
8260 STM32-DISCO_BB base board).
8261 - Converted all STM32F4-Discovery configurations (with base board) to
8262 configure the Ethernet driver to use the work queue (vs. interrupt
8267 - Added support for TM4C123G timers. From Calvin Maguranis.
8268 - Added a Tiva ADC driver. From Calvin Maguranis.
8272 - Added TM4C123G timers on the TM4C123G Launchpad. From Calvin Maguranis.
8273 - Added Tiva ADC support to the TM4C123G-Launchpad. From Calvin Maguranis.
8277 - Math Library: Added support for inverse hyperbolic functions,
8283 - apps/examples/ustream: Add a simple test of Unix domain stream
8285 - apps/examples/udgram: Add a simple test of Unix domain datagram
8287 - apps/netutils/netlib: Add utilities to convert to/from prefix
8288 lengths from/to 128-bit network masks.
8289 - apps/nshlib: Modify the NSH IPv6 ifconfig command to show the more
8290 standard post-pended prefix value, rather than the full 128-bit
8294 implemented but present in this release. They are not likely to be
8298 realization of Unix-style user processes in NuttX. There is more to
8311 - Work Queues: Fix a backward calculation when determining the time
8312 to the next interesting event. . From Liio Chen via the PX4
8314 - clock_systimespec(): Fixes for compilation errors in certain
8319 - Fixed a problem with one of the font files. From Pierre-noel Bouteville.
8323 - IOB Deadlock: There were issues with the TCP write-ahead buffering
8326 wait for TCP read-ahead buffering space to be available. It should
8329 waited are still present (like iob_alloc()), but now there are non-
8331 TCP read-ahead logic now uses only these non-waiting interfaces.
8332 - TCP Deadlock: Fix another deadlock when CONFIG_NET_NOINTS is enabled.
8336 CONFIG_NET_NOINTS=y, the wait blocks with the network locked -- bad
8337 style and also can lead to a deadlock condition.
8338 - ARP response waiting: Fixes another CONFIG_NET_NOINTS issue. When
8341 interrupts are re-enabled while we wait and all is well).
8342 - TCP accept(): Fix a major TCP bug introduced with the NuttX-7.7
8344 socket as 'connected' got moved to BEFORE the point where the check
8347 it would fail to connect. But then if try again, it would connect
8348 okay. So the symptom was connect-fail-connect-fail-...
8349 - Lots of build problems introduced into multiple NIC support with the
8350 IPv6 changes of NuttX-7.7. Many places where conditional logic based
8357 - Pipes and FIFOs: Fix a race condition between FIFO buffer operations
8359 are used to support Unix domain, datagram sockets. The default
8362 in the FIFO will be lost. Some like UDP read-ahead is needed: The
8363 buffered data in the FIFO needs to be retained until the reader gets
8364 a chance to re-open the FIFO. Added an ioctl (PIPEIOC_POLICY) to
8368 - RAMTRON: Table of parts is not terminated properly if
8374 - Removed all occurrences of up_maskack_irq() that disables interrupts
8377 unconditionally re-enables interrupts with the interrupt exits. This
8378 interferes with the drivers ability to control the interrupt state.
8380 impossible to test.
8384 - ARMv7-A and ARMv7-M memcpy(): Optimized ARM assembly language
8385 memcpy's were not returning a value in R0 they are required to do.
8387 - ARMv7-A interrupt handler should not automatically re-enable interrupts
8388 on interrupt return. That interferes with the driver's ability to
8389 manage interrupts. Analogous change made to all other architectures
8394 - GPIO Interrupts: Disabling any of EXTI 5-9 interrupts was disabling
8395 interrupts for all EXTI 5-9. Same issue with EXTI 10-15. From Jussi
8400 - RTCC: Fix for recent changes that caused compilation failrues with
8402 - SPI: The source clock for SPI 4,5, and 6 should be PCLK2, not PCLK1
8407 - execl(): Fix bad logic in counting the number of arguments.
8409 Pierre-noel Bouteville.
8413 - Fix for building with parallel make. Build-server sometimes failed
8414 'make -j24' with errors in the builtin line or or sometimes silently
8422 NuttX-7.9
8423 ---------
8427 that release consists of two tarballs: nuttx-7.9.tar.gz and
8428 apps-7.9.tar.gz. Both may be needed (see the top-level nuttx/README.txt
8435 - Assertions: Add support for dumping board-specific information on
8437 - boardctl(): : Add a new non-standard OS interface called boardctl().
8438 This is similar to a driver IOCTL call. But this is an IOCTL call
8440 all of the ad hoc OS interfaces that are current used to perform
8443 these rogue interface in to at least a single crazy call.
8447 - Line Joins: Line drawing graphic functions now take an argument that
8448 will draw a circular "cap" on the ends of lines to support cleaner
8453 - SPI iInterface: Add an SPIDEV_USER so that there can be board-
8455 - I2C Interface: Add a user provided void * argument to the I2C
8458 - AT24 EEPROM Driver: Add support for (1) the byte-oriented read()
8460 devices that use 8-bit addressing.
8461 - Freescale MPL115A barometer: Add driver for the Freescale MPL115A
8463 - CS2100-CP: Add a driver for the CS2100-CP Fractional-N Multipler
8465 - RTC IOCTls: Added the definitions of a driver based RTC interfaces
8470 - umount2(): Added to support un-mount flags. umount() is now a macro
8472 - File system interface: Pass the umount2() flags to every unbind()
8473 implementation. That is where the decision to umount or not and how
8474 to umount will be made.
8475 - FAT unbind: Add support for umount2(target, MNT_FORCE) in the FAT
8480 - netdev_register(): Improve the network device registration logic.
8482 is assigned to the device name by incrementing the device number
8484 - Add TUN network device. Used to support the Netutils PPPD
8487 * ARMv7-M
8489 - ARM Cortex-M7: Add basic support for the Cortex-M7 architecture.
8490 - ARMv7 Common Lazy Exception handling. Add common support for lazy
8491 FPU state saving. MCU-specific lazy FPU saving was already in place.
8492 This change just makes the code share-able.
8496 - SAMA5 Serial: Backport support for flowcontrol and termios from
8501 - Atmel SAMV7: Add architecture support for the Atmel SAMV7 family
8502 (Cortex-M7)
8506 - Atmel SAMV71 Xplained Ultra: Add board support for this SAMV7 board.
8515 - EFM32 USB Device is now functional with the efforts of From Pierre-
8517 - EFM32 I2C: Add I2C driver. From Pierre-noel Bouteville.
8521 - STM32F372/F373: Adds architecture support for this STM32 parts.
8526 - STM32 RTCC: Break out a new internal interface, stm32_rtc_setdatetime().
8527 This eliminates some un-necessary time conversions. From Freddie Chopin.
8528 - STM32 RTCC: Add an implementation of the RTC lower half interface
8530 - STM32 RTCC: Extend the RTC interface to support reading subseconds.
8532 - STM32 BBSRAM: Adds the ability to use the STM32F2 and STM32F4 Battery
8533 Backed SRAM in the file system. With an option to Save Panic context
8534 to one of the files. From David Sidrane.
8538 - Olimexino-STM32: Board support for the Olimexino STM32 board from David
8540 - Viewtool-STM32F107: Add support for an optional, add-on Freescale
8545 - TM4C1294: Add support for the TM4C1294. Contributed by Frank Sautter.
8549 - Tiva ADC: Updated files to allow for ADC and PWM triggering by a
8551 - Tiva Timer: Refactoring by Calvin Maguranis
8555 - TM4C123G-launchpad: Add ADC support. From Calvin Maguranis.
8556 - TM4C123G-launchpad: Add board button interrupt support. From Calvin
8558 - TM4C1294 Launchpad: Add support for the TM4C1294 Launchpad.
8563 - PIC32MZ: Add architectural support for the PIC32MZ (MIPS32 M14k).
8568 - PIC32MZ Starter Kit: Add basic board support for the PIC32MZ.
8573 - gettimeofday(): This function is no longer a core OS interface. It
8575 - settimeofday(): Added. gettimeofday has been deprecated in POSIX
8576 2008. settimeofday() was never part of POSIX, but I decided to add
8577 it to libc as well just for symmetry.
8578 - Day-of-Week: Add CONFIG_TIME_EXTENDED to support the last 3 members
8581 - sighold(), sigrelse(), sigignore(), sigset() and sigpause(): New
8583 - sys/select.h: Extend the fd_set type definition so that it can
8586 - netdb.h: Add a mostly-commented-out version of the standard netdb.h
8588 - include/nuttx/board.h: Remove common board function prototypes from
8593 - OS test: Improved error checking for sem_timedwait() from Juha
8595 - OS test: Add a simple test of sigprocmask, sighold, and sigrelse.
8596 - PPPD test: Add PPPD test case. Split out from the PPPD daemon by
8598 - Netutils: Add a PPP daemon. From Max Neklyudov.
8599 - NSH: NSH initialization now calls boardctl(BOARDIOC_INIT) instead
8601 It is not used and there are better ways to do that operation.
8602 - NSH: Allow NSH 'date' command with no hardware RTC. This command
8605 - apps/examples/: Several tests changed (touchscreen adc, pwm,
8608 - Modbus: Includes extensions to support RTU master mode by
8609 Armink(383016632@qq.com): https://github.com/armink/FreeModbus_Slave-Master-RTT-STM32.
8610 Ported to NuttX by Darcy Gong.
8611 - TZ database: All logic to build timezone database needed for
8615 implemented but present in this release. They are not likely to be
8619 realization of Unix-style user processes in NuttX. There is more to
8632 - atexit(): Fix compile failure due to reference to undefined variable
8634 - syscalls: Last changes to message queue prototypes did not make it
8637 - waitpid(): Do not use uninitialized boolean in waitpid(). From Juha
8639 - Timing functions: Fix some nanosecond comparisons. Comparisons should
8640 be greater than OR EQUAL TO 1000000000 for maximum value of nanoseconds
8642 - Time initialization: Fix an error in time initialization when there
8644 The call to clock_calendar2utc() was returning the time in units of
8645 seconds. The initialization logic, however, was expecting to get
8647 obviously has not significant impact to behavior in systems where
8649 - mq_timedsend(): Should not check for valid time if there is space
8651 - select() and sem_timedwait(): Fix places where the errno value was
8654 - clock_systimer64(): Fix a problem in clock_systimer64 that occurs
8655 when (1) the 64-bit system time is enabled, and (2) the value of
8658 time to 64-bit millisecond value in clock_systmer64() causes some
8659 bad times to be returned. Time was converted to milliseconds, then
8660 to configured ticks. Precision was lost in the millisecond
8661 conversion. The fix is to first convert time to a 64-bit microsecond
8662 value, then to the configured tick value. Noted by David Sidrane.
8663 - clock_systimespec(): When an RTC is used clock_systimespec() must
8664 subtract the basetime from the returned time. It needs to return
8667 - AIO: correct some backward tests in aio_read() and aio_write():
8674 - procfs: Fix potential NULL pointer dereference of 'node'. From
8676 - FAT: fat_unbind() was accessing 'fs->fs_sem' after freeing the 'fs'
8678 - mkfatfs: Use DMA memory for mkfatfs when needed. This makes mkfatfs
8680 to ensure mkfatfs operates with boards that use DMA for microSD.
8682 - FAT unmount: Fix a bug in the FAT unbind() logic. There were
8685 structures were never being added to the list of open files. So
8688 - FAT mounting: Fix misthink when CONFIG_ENDIAN_BIG=y. From Lwazi Dube.
8692 - CAN upper half driver: Some lines had to be reordered in the can_open
8693 function otherwise the open count will only be incremented from 0 to
8694 1. This caused problems when trying to open the can bus from two
8699 - crypto: Fix issues when AES support was added for the STM32L1.
8704 - Network initialization: Divide net_intiialize() into net_setup() and
8705 net_initialize() to solve a chicken-and-egg problem. net_setup()
8707 data structures are ready to register new network devices.
8711 - netdev_unregister(): Fix a list handling error. From Max Neklyudov.
8712 - Socket dup: Do not call sockfd_socket() twice. From Juha Niskanen.
8716 - max11802 touchscreen: Fix possible unmatched IRQ restore (not
8719 - MMCSD SPI Multi-block transfers: ACMD23 must be preceded with CMD55
8721 wait loop must be inserted before writing the next block of data to
8723 - MMCSD SDIO: Fix some bad logic when file system debug is turned on:
8724 Arguments to syslog were missing so that garbage was being printed.
8725 - Common upper-half serial driver: Report correct number of bytes free
8727 - Pipes/Fifos: Fix zero-lenth writes to pipes/FIFOs. From Jussi Kivilinna.
8728 - USB device MSC: Add NULL pointer check. From Juha Niskanen.
8729 - BCH driver: Avoid NULL pointer dereference when bch->refs == 255.
8731 - Various drivers: The inode unlink method should not be support if
8732 operations on the root pseudo-filesystem are disabled.
8734 * ARMv7-M
8736 - ARMv7M MPU: Bad syntax in ARMv7-M MPU logic would cause failure to
8737 write the correct value to the MPU_RASR register. From Juha Niskanen.
8741 - SAM3/4 Serial TERMIOS: A side-effect of changing serial settings
8744 changed when there are no open references to the serial device. In
8748 to receive data. In that case, the side-effect of disabling
8751 - SAM3/4 Serial: The IMR register is read-only. This means that
8752 sam_restoreints() did not actually re-enable UART interrupts
8753 (Fortunately, that function was not being used up to this point).
8754 - SAMA5 HSMCI: Fix a bug in SAMA5 HSMCI. The bitfield mask and shift
8756 blocks in the BLOCKR register. This was sufficient to prevent DMA
8761 - SAMA5 Timer/Counter: Fix typos in timer/counter header file. From
8766 - STM32 PWR and RTC: Changes to support fully write protecting the
8768 from enable to the domain being writable. The KISS solution is a
8771 - STM32 SPI: Add missing SPI callback functions to the STM32 SPI
8773 - STM32 I2C: Add missing NULL check. From Juha Niskanen.
8774 - STM32 USB device: Fix stale initialization invalidating later NULL
8776 - STM32 UART: Fix RX DMA setup for UART5. From Jussi Kivilinna.
8777 - STM32 UART: Make input hardware flow-control work with RX DMA. From
8779 - STM32 RTC and clock control: The STM32F4Discovery board doesn't
8783 register lead to rtc_setup() call that rightfully enables the LSI
8785 rtc_resume() call does NOT start the LSI clock! The right place to
8789 IWDG, while the LSE only for the RTC (and to output the MCO1 pin).
8795 - Tiva GPIO driver needed small fixes in the configuration routines and
8796 discovered false-positive bugs in interrupt testing: interrupts are
8797 now verified to actually be working reliably. From Calvin Maguranis .
8801 - mips32/Toolchain.mk: Current Pinguino toolchain uses the prefix p32-
8802 instead of mips-.
8806 - sigaddset() and sigdelset(): Need to set errno if a bad signal
8808 - sfrtime(): Missing implementation of %C in sfrtime() C (was being
8810 - pthread.h: Fix PTHREAD_COND_INITIALIZER.
8811 - ungetc.c: Fix NULL pointer dereference in ungetc() if 'stream' was
8812 NULL, 'stream->fs_oflags' was evaluated. From Juha Niskanen.
8813 - Fixes to asinh(), atanh(), and sinh(): The 'basic' expansions all
8814 exhibited bad cancellation errors near zero (<= 1E-10). This can be
8815 easily seen e.g. with x = 1E-30, the results are all zero though they
8816 should be extremely close to x. The cutoff values (1E-5, 1E-9) are
8818 double). Functions could maybe be optimized to use only first term (x)
8820 - localtime(): Inconsistent configuration name: CONFIG_LIBC_TZDIR vs
8825 - Modbus: Fix some compile problems when TCP is enabled.
8827 NuttX-7.10
8828 ----------
8832 that release consists of two tarballs: nuttx-7.10.tar.gz and
8833 apps-7.10.tar.gz. Both may be needed (see the top-level nuttx/README.txt
8840 - ARMv-7M, binfmt/, STM32: Add support uClibc++ exceptions. This
8847 - RA8875 LCD driver contributed by Marten Svanfeldt.
8851 - Union File System: Add support for a union file system that can be
8852 used to overlay and merge the content of two mounted file systems.
8856 - USB Hub Support: Bring in USB hub-related files from
8860 USB host controller driver interfaces and modifications to many
8862 - USB host CDC/ACM class driver: Added initial implementation of a
8863 host-side CDC/ACM driver. Initial version was a great learning
8865 discussed in the top-level TODO file).
8866 - IPv6 Routing: Complete implementation of the IPv6 routing logic.
8871 - Local Sockets: Add poll support for Unix stream sockets. From Jussi
8873 - net/: ARP, ICMP, ICMPv6, PKT, TCP, and UDP now all receive event
8875 also from Device-specific events such as when the network goes down.
8879 want to receive device related notifications. This prevents network
8883 - TUN: Misc. improvements to the TUN driver, mostly related to poll().
8888 - Simulator: Add logic to test localtime and TZ database. See
8890 - Simulation: Add a configuration for testing the Union File System.
8894 - Calypso Compal-E86: Updates for execution out of FLASH on the C139
8899 - SAML21 Support: And chip definitions, configuration framework,
8904 - SAML21-Xplained: Add a board support for the SAML21 Xplained Pro.
8909 - KL25Z64: Added support for the KL25Z64. The KL25Z64 is a lower
8915 - Teensy-LC: Add board support for the Teensy LC board. Support is
8922 - LPC111x: Support for the LPC11xx family (the LPC1115 MCU in
8927 - LPCXpresso LPC1115: Support for the LPCXpression LPC1115
8932 - LPC17xx Ethernet: Add support for the Micrel KSZ8041 PHY to the
8937 - Lincoln60: Add a network enabled configuration for the Lincoln60
8942 - SAM4CM: Add support for optical mode for the SAM4CM UART1. From
8947 - Kinetis K20: Basic support for the Kinetis K20 architecture. Taken
8952 - SAMV71-Xplained w/maXTouch Xplained Pro: A TWIHS fix was the last
8953 barrier to getting the touchscreen working in the maXTouch Xplained
8959 - STM32: Added support for STM32F302K8 and STM32F302K6. From Ben Dyer
8961 - STM32F205RG: Add basic support for the STM32F205RG. From SourceForge
8962 Ticket 40 (anonymous, 2015-05-31).
8963 - STM32 F3: Add DBGMCU register definitions for the F3 family. From
8968 - STM32 LCDC: Defined a second interface for the dma2d controller.
8972 - STM32 PVD: Added support for STM32's Programmable Voltage Detector
8977 - STM32F429i-Disco: Add support for the new DMA2D features to the LTDC
8982 - TM4C1294 Launchpad: Added TM4C1294NCPDT EN0_LED2 (10/100-Base-Tx);
8987 - libc: Add an option to disable support for long long formats in
8989 by omitting large libgcc.a libraries to perform the 64-bit
8994 - nuttx/zoneinfo: Add logic to build a ROMFS file system
8999 - Add poll support for Unix stream sockets. From Jussi Kivilinna.
9000 - Enhancements to NSH ifconfig for case of multi-link operation, TUN
9002 - Enhanced output to NSH ping command from Max Neklyudov.
9003 - The NSH mount command now recognizes the Union filesystem type when
9008 - apps/netutils/thttpd/ and apps/examples/thttpd/: Add support for
9011 unusable. binfs or ELF are fallback binary formats. This commit
9012 adds an option to use binfs with the Union FS.
9016 - Modify/simpify apps/examples build files. From Roman Saveljev.
9017 - apps/examples/ltdc: Add testing support for the STM32 LTDC's 2D DMA.
9019 - apps/examples/ostest: Add a test of nested signals. There are no
9020 failures to handle signals but neither am I getting any nested signal
9022 - apps/examples/elf: Add configuration options to support building the
9024 add hello++5 to the ELF example From Leo aloe3132.
9025 - apps/examples/unionfs: Add a test of the union file system to
9029 implemented but present in this release. They are not likely to be
9033 realization of Unix-style user processes in NuttX. There is more to
9046 - boardctl(): Add missing case causing that caused failures of PWM
9048 - pthread_kill(): Re-implemented pthread_kill(). It was just a simple
9050 for multi-threaded task groups has been implemented, calling kill()
9051 does not do what pthread_kill() is supposed to do. The corrected
9053 to the specific pthread and no other.
9054 - uint32_t callbacks: Update the type passed to watchdog timer
9055 handlers. Using uint32_t is a problem for 64-bit machines because
9056 it it too small to pass a pointer. uintptr_t is a more appropriate
9058 - mq_timedreceive(): move the location where the errno value is set;
9061 - POSIX message queues: Move mq_setattr() and mq_getattr() from
9062 nuttx/libc/mqueue to nuttx/sched/mqueue. Also add syscall support
9070 - MTD: Increase the size of the fields in the geometry structure
9071 (again) to support larger FLASH sizes. Needed by Sebastien Lorquet.
9075 - poll(): Fix resource leak and memory corruption on poll failure.
9080 - LPC31xx and SAMA5Dx EHCI: Fix cache related problem in LPC31 and
9085 operations could be subverted by accesses to adjacent data or could
9087 forever, but was only revealed due to unlucky memory allocations
9092 - All USB device class drivers: There needs to be a check to make
9095 product names will be truncated to fit in the request buffer.
9099 - TCP: Correct failures in long Telnet sessions by increasing th
9100 size of the number of bytes sent from uint16_t to uint32_t. This
9101 avoids an integer overflow that causes a long Telnet session to be
9103 - Network locks: Correct some network lock logic: Two error
9106 - Local Sockets: Local stream sockets had problem of double releasing
9108 pipe pair being closed in multi-client case. Solve by adding per
9109 connection instance ID to pipe names. From Jussi Kivilinna.
9110 - TCP: Fix an important TCP networking bug: 16-bit flags was being
9111 converted to 8-bits in a few locations, causing loss of status
9113 - TCP: net_startmonitor() always returned OK. In the race case
9116 callers of net_startmonitor() to assume that the connection was
9118 causing the socket to be incorrectly marked as connected. This
9120 - setsockopt() failed when setting timeouts to values less tha 100
9121 msec. That is because the timeout is limited to stops of 1
9124 net_timeval2dsec() now accepts and option to determine how it
9126 the remainder to round to the closed decisecond value, or use any
9127 non-zero remainder to the next larger whole decisecond value. Bug
9129 - TCP: In the TCP connection operation, it was trying to setup the
9132 and the TCP state is not yet correct for a connected socket. However,
9134 condition that causes worse problems when trying to connect. The fix
9135 is to move the logic that starts the network monitor to AFTER the
9140 - SAM4CM and SAMA5D Free-running timer: Logic that samples the free
9142 cause interrupts to be lost. So, if when the status register is
9148 - SAM3/4 Serial: When reconfigured, serial does not receive bytes
9155 - LPC176x GPIO: Reorder steps when an output GPIO is configured in
9156 order to avoid transient bad values from being output. From Hal
9158 - LPC17 USB OHCI: Correct some initialization of data structures.
9161 - LPC17xx Ethernet: Review, update, and modify the Ethernet driver so
9168 - EFM32 SPI: Add missing SPI GPIO pin initialization. From Pierre-noel
9173 - STM32 F3: Added missing EXTI definitions for the STM32 F3; Correct
9179 - STM23 RTC: Fix an error introduced into stm32_pwr_enablebkp().
9182 - STM32 RTC counter: Now need to enable backup domain write access
9184 - STM32 OTG FS and HS: Added protection in the event that out-of-bound
9189 - STM32F429i Disco: (1) Fix a bad return value if the LCD driver is
9192 of the message queue from 32 to 64 in the lcd configuration. From
9197 - Fixes for Tiva TM4C1294NCPDT. From Frank Sautter.
9201 - SAMV7 TWIHS: Fix SAMV TWIHS logic that performs multi-message
9206 - SAMA5 CAN: Fix SAMA5 CAN frame construction. From Max Holtzberg.
9210 - stdlib.h: MAX_RAND should be RAND_MAX.
9211 - assert.h: Wrap definitions of assertion macros in do while so that
9213 where semicolons were missing at the end of an assertion also had to
9215 - inetntoa(): Correct errors in printing IP address when type char is
9220 - Tools: Fix test for the existence of the apps/ directory in
9221 configure.c. Fix backward interpretation of options, -l was selecting
9222 Windows and -w was selecting Linux. This was SourceForege Ticket #39.
9226 - apps/nshlib/nsh_timcmds.c: Check return values from time functions.
9227 - apps/nshlib/: Fix handling of gmtime_r return value in time commands.
9232 - apps/netutils/ntp: Fix mismatched sched_lock/unlock. Noted by Juha
9237 - apps/examples/nxlines: Fix missing right bracket that causes
9239 - apps/examples: When boardctl() fails, need to print errno not the
9240 returned value which will always be -1.
9241 - apps/examples: Correct use of the BOARDIOC_GRAPHICS_SETUP boardctl()
9244 NuttX-7.11 Release Notes
9245 ------------------------
9249 that release consists of two tarballs: nuttx-7.11.tar.gz and
9250 apps-7.11.tar.gz. These are available from:
9255 Both may be needed (see the top-level nuttx/README.txt file for build
9262 - clock_gettime(): Use up_timer_gettime for CLOCK_MONOTONIC in
9264 - waitpid(): Implement WNOHANG for waitpid() only and for the case of
9266 - SCHED_SPORADIC: Add a sporadic scheduler to NuttX.
9267 - Extend the processor-specific interface to include information to
9269 - sem_tickwait(): Added this function for internal use within the OS.
9270 It is a non-standard but more efficient version of sem_timedwait()
9277 - Graphics: Implement anti-aliasing in order to clean the drawing of
9278 all edges. Anti-aliasing is supported in the horizontal, raster
9280 - SSD1306 LCD Driver: Modify the SSD1306 LCD driver to support either
9285 - mount: Add the ability to mount a file system on top of en existing
9286 node in the pseudo-file system.
9287 - epoll(): Add a very simple epoll layer just around poll calls. To
9292 - IOCTL: Add relay IOCTL definitions. From Max Neklyudov.
9293 - I/O Expander Framework: Add an I/O expander driver framework. From
9295 - NXP PCA9555 I/O Explander. Add PCA9555 driver.From Sebastien
9297 - BMP180 Barameter: Add support to Bosch BMP180 barometer. From
9299 - CAN IOCTLs: Add CAN IOCTL command definitions to manage CAN message
9301 - CAN Driver: Add configuration to support DLC to byte conversions
9303 - SPI Slave Interface: Add a definition of an SPI slave interface.
9304 - LM92 Temperature Sensor: Add a driver for the LM92 temperature
9306 - AS5048B Rotary Magnetic Sensor: Add support for an AS5048B rotary
9308 - Ramtron Driver: Update to include supportf for newer RAMTRON parts.
9310 - MB7040 Sonar Driver: Add support for a MB7040 sonar driver. From
9312 - ms5805 Altimeter Driver: Add support for an MS5805 altimeter. From
9317 - DNS Client: Implement the low-level network DNS packet protocol to
9319 - NetDB: Add support for a DNS host name resolution cache. This can
9322 - NetDB: Name resolution logic now supports lookups from a file like
9324 - Network Initialization: Add CONFIG_NETDEV_LATEINIT that can be
9325 used to suppress calls to up_netinitialize() from early in
9327 - FTMAC100 Ethernet MAC Driver. Add support for Faraday FTMCA100
9329 - UDP Networking: Add support for send() for connected UDP sockets.
9333 - Add CFB and MAC AES modes. From Max Neklyudov.
9337 - Simulation: Implement board_power_off() for the simulation platform.
9342 - MoxaRT SoC: Add support for MoxaRT SoC found in the most Moxa serial
9347 - Moxa NP51x0: Moxa NP51x0 series of 2-port advanced RS-232/422/485
9350 * ARMv6-M:
9352 - ARMv6-M Assertions: Port some per-process stack dumping logic from
9353 ARMv7-M to ARMv6-M. From Alan Carvalho de Assis.
9357 - SAML21: DMA: Add SAML21 DMA support.
9358 - SAMD21: Add architecture support for the SAMD21 family.
9359 - SAMD21-Xplained: Board configuration for the SAMD21 Xplained board.
9363 - SAM4E: Add default loop optimization if EEFC_FMR is available in the
9365 - crypto/ and SAM4CM: Add CFB and MAC AES modes. From Max Neklyudov.
9366 - SAM3/4: Add a TWI driver for the SAM4CM. From Max Neklyudov.
9370 - Kinetis: Add support for MK20DN--VLH5 and MK20DX---VLH5. Needed
9371 for backward compatible support for Teensy-3.0.
9375 - Teensy 3.x: Add board support for the PJRC Teensy-3.0 and
9376 Teensy-3.1 boards.
9380 - SAMV7: Add an MCAN driver for the SAMV7 platform.
9381 - SAMV7 SPI Slave Driver: Add the an SPI slave driver.
9385 - STMicro STM32 F7: Add architecture support for the STMicro STM32
9387 - STM32 F446: Add support for the STMicro STM32 F446. From David
9392 - STM32 F7: Add an STM32 F7 Ethernet driver.
9393 - STM32 F7: Port the STM32 F4 DMA driver.
9394 - STM32 F4 ADC: Add DMA support to the ADC driver for STM32 F4. From
9399 - STM32F762G-Disco: Add support for the STMicro STM32 F7 Discovery
9401 - STM32F4-Disco: Add support to BMP180 driver on the STM32F4 Discovery.
9406 - Add asctime(), asctime_r(), ctime(), and ctime_r().
9407 - sethostname(): Add support for sethostname().
9408 - gethostbyname() and gethostbyaddr(): Add support for
9410 non-standard gethostbyname_r() and gethostbyaddr_r(). This moves
9415 - testbuild.sh: Add a script that can be used to perform building
9420 - apps/ Build System: No longer depends on hardcoded lists of
9421 directories. Instead, it does a wildcard search to find all
9422 appropriate directories. This means that to install a new
9423 application, you simply have to copy the directory (or link it) into
9426 - mkkonfig.sh: Add the tool mkkconfig.sh that dynamically builds the
9428 configuration file has been removed and now the top-level Makefile
9429 executes tools/mkkconfig.sh to auto-generate the top-level Kconfig
9430 file. A new apps/ make target call preconfig: was added to support
9431 this operation. Now you do not have to modify the top-level Kconfig
9432 file to add a new directory into the configuration; the top-level
9433 subdirectory simply needs to include a Kconfig file and it will
9437 - mkkconfig.bat: Add the Windows script corresponding to
9442 - NSH shutdown command: NSH will now support an (optional) shutdown
9444 The command can also be used to reset the system if
9446 - NSH uname command: Add support for a uname command.
9447 - NSH nslookup command: Add an nslookup command.
9451 - NetDB: Add a system command to access the network database.
9452 - readline(): Add support for Unix-style tab complete to readline.
9454 - readline(): Extended the tab-completion support to also expand NSH
9456 - readline(): Add support for an in-memory command line history that
9462 - DNS client: Moved the DNS client logic into the NuttX C library.
9465 - Replace calls to the non-standard dns_gethotip() with calls to
9467 - NetLib: Create netlib wrapper functions around dns_getserver() and
9468 dns_setserver() to isolate application code from changes to those
9473 - OS test: Extend the OS test to include a test of
9475 - OS test: Add a test for the sporadic scheduler.
9483 - pthreads: Use -1 instead of 0 as PID for unclaimed mutexes. From
9485 - pthreads: Implement pthread_mutex_trylock() for recursive mutexes.
9487 - pthread_create(): Group binding needs to be cleared before
9489 group->tg_nmembers decremented or group being released. group_leave()
9492 - Protected Mode User Memory Allocator: Redesigned how the user space
9493 heap is accessed from the kernel code in protected mode. It used to
9496 thing that those memory management functions do is to trap back into
9497 the kernel to get the current PID. Worse, that operation can be
9499 The solution is to remove all of the memory management function
9504 importantly, failures do to freeing memory when a test exits.
9505 - pthread_create(): Fix an (unlikely) error in fallback value in the
9510 - STMPE811 Driver: In stmpe811_instanciate() when
9511 CONFIG_STMPE811_MULTIPLE is enabled, and the call to
9513 restored to its previous state. From Sebastien Lorquet.
9514 - CAN driver: Fix an issue in the CAN driver where the rx_sem count
9519 - NFS client: Fix prototype of unbind method. The function prototype
9520 was not updated for NFS after a recent change to the file system
9525 - netconfig.h: Fix some backward compilation that was emitting #error
9527 - SLIP Driver: Fix a missed name change when many of network
9530 - Networking: Allow receipt of empty UDP packets. From Max Neklyudov.
9532 * ARMv6-M:
9534 - ARMv6-M: Fix Cortex-M0 assembly error when the interrupt stack is
9539 - SAMD20, D21, L21: In the SAML21, SERCOM5 uses a different SLOW clock
9543 - SAMD/L: Several fixes to register definitions and types. From
9548 - SAM3/4 UART: Back out an error introduced with commit
9551 - SAM4CM: Fix SUPC register definitions. From Max Neklyudov.
9552 - SAM3/4 WDT: Correct some problems with SAM3/4 watchdog driver.
9557 - SAMV7 UART: Also back the bad cloned change o sam_lowputc.c for
9562 - LPC4350: Correct some LPC4350 GPIO pin configurations. From
9567 - EFM32 SPI: Correct write to incorrect register in EFM32 SPI driver.
9568 From Pierre-noel Bouteville.
9572 - STM32 F15x: STM322 F15x stm32_stdclockconfig() was calling
9575 - STM32 Ethernet: Extend STM32 Ethernet operating frequency to 180MHz.
9580 - SAMV7 Xplained: In clock configuration, divider was set to 25 to get
9585 * ARMv7-A:
9587 - Cortex-A5 vfork(): Fix a Cortex-A compilation error when system
9592 - SAMA5Dx EHCI: Fix some bad conditional compilation that left a
9597 - getopt(): Uninitialized variable can cause hardfault from getopt()
9602 - NSH/THHPD: Change decoding to handle the increased size of the
9607 - THTTPD: Fix compilation problems when
9609 - THTTPD: Missing gci-src as a dependency path when building with
9614 - poll() example: Fix a few bit-rot compilation errors.
9615 - Nx Lines example: If CONFIG_NX_ANTIALIASING=y, then the nxlines
9617 than the line it drew. That eliminates edges effects due to
9618 applying the anti-aliasing algorithm twice. A better solution
9619 would be to make anti-aliasing an option for each graphics call so
9620 you would rend the line with anti-aliasing ON and clear it with
9621 anti-aliasing OFF. but I don't have the wherewithal for that change
9623 - OS test: Improve synchronization in round robin tests. On very fast
9625 Need better interlocking to assure that the threads actually do start
9628 NuttX-7.12 Release Notes
9629 ------------------------
9633 that release consists of two tarballs: nuttx-7.12.tar.gz and
9634 apps-7.12.tar.gz. These are available from:
9639 Both may be needed (see the top-level nuttx/README.txt file for build
9646 - Added SSD1351 OLED controller support. Contributed by Paul
9651 - MS58xx: Generalize the MS5805 altimeter driver to support other
9653 - CAN driver interface: Add an error indication bit to the CAN
9655 - Developed a new interface for QSPI. Most QSPI hardware (such as the
9656 SAMV71) used a programmed interface to access the QuadSPI FLASH.
9659 - Added a driver for ST25L1*K QuadSPI parts.
9660 - Renamed the battery driver interface to battery_gauge since it
9663 - Added a new framework to support a batter charger interface. From
9665 - Added a BQ24250 battery charger driver. From Alan Carvalho de Assis.
9669 - Added support for the local loopback device (dev lo, hostname localhost).
9670 - Added NetDB support for the local loopback device.
9671 - Network initialization: Automatically initialize all the TUN and
9676 - The simulation now runs under Cygwin64. Modern Cygwin X86_64
9678 System 5 ABI would not work on X86_64-based Cygwin machines. Newer
9679 Cygwin tool chains do nor pre-pend symbol names with the underscore
9684 - Added architectural support for the Atmel SAMA5D2 parts. Not fully
9689 - Added support for the Atmel SAMA45D2 Xplained Ultra board. Not
9694 - SAMV7 USBHS DCD: The device controller driver is (finally)
9699 - Implement options to use external SDRAM and or SRAM for the heap.
9704 - Added architectural support for the LPC4370. From Lok Tep.
9708 - Added Ethernet support. From Ilya Averyanov.
9709 - Added LPC43xx EHCI driver from Ilya Averyanov.
9713 - Added support for the NXP LPC4370-Link2 development board from Lok
9718 - Added architectural for STM32F303K6, STM32F303K8, STM32F303C6,
9724 - Added OTG support for STM32F44x. From David Sidrane.
9728 - Added support for the STMicro Nucleo F303ERE board from Paul
9733 - stdlib: Add support for div() to the C library. From OrbitalFox.
9734 Also added ldiv() and lldiv() which are equivalent to div() with
9736 - Added an implementation of the standard shutdown function.
9740 - tools/mksymtab: declare g_symtab array as const to occupy RO section
9745 - Simplify configs/ Makefiles by combining common logic into a new
9750 - apps/system/symtab: Optional canned symtab inclusion to the build.
9760 - apps/canutils/uavcan: Add support for libuavcan. From Paul Alexander Patience.
9764 - apps/examples/can: Extend the CAN loopback test by adding more
9766 - apps/examples/usbserial: Can now be run as an NSH builtin-function.
9768 - apps/examples/nettest: Add option to suppress network initialization.
9771 - apps/examples/nettest: Extend test so that can be performed using
9773 - apps/examples/netloop: Add a test of the local loopback device.
9774 - apps/examples/udpblaster: Add a test to stress the network by
9776 - apps/examples/uavcan: libuavcan example from Paul Alexander Patience.
9784 - wd_create(): Correct a counting error in the number of available
9787 - mq_open(): When message queue is opened, inode_reserve() leaves the
9790 - work_queue(): Logic that sets the queued indication and the logic
9795 - Fix a memory leak in the built-in application logic: File was not
9800 - poll(): If we fail to setup the poll for any file descriptor, for
9802 - rwbuffer: Fix some logic errors. From Dmitry Nikolaev via Juha
9804 - ROMFS: One allocation was not being freed if there was a subsequent
9805 failure to allocation I/O buffers resulting in a memory leak on
9810 - Fix a bug in tun interface driver. From Max Neklyudov.
9811 - recvfrom(): Correct wait for new data when NET_UDP_READAHEAD is
9813 state.rf_recvlen == -1. I have not checked if data are accumulated
9814 to the right position in the buffer however. From Pavel Pisa.
9815 - networking: Correct return value from psock_tcp_accept(). From
9817 - TCP: Fix a problem in when there are multiple network devices.
9818 Polls were being sent to all TCP sockets before. This is not good
9823 data transfers can cause crashes. The fix is to lock into a single
9825 - net/tcp: The logic that binds a specific network device to a
9827 bind(), the local address should be used to associate a device with
9831 is the one guaranteed to be available.
9832 - net/tcp: Fix unbuffered send compilation error when Ethernet is not
9835 * ARMv7-M:
9837 - All ARMV7-M IRQ setup: Always set the NVIC vector table address
9842 - Fix some H/W floating point logic: In the original implementation,
9843 !defined(CONFIG_ARMV7M_CMNVECTOR) was a sufficient test to determine
9847 - ARMv7-M, all "lazy" interrupt stack logic. Assembly instruction
9851 - All ARMV7-M: Force 8-byte stack alignment when calling from assembly
9852 to C to interrupt handling.
9853 - up_schedulesigaction(): Fix logic that determines if there is a
9855 Both the test and the scheduling action need to be atomic. This
9856 problem was fixed on the ARMv7-M but also ported to other
9861 - LPC43xx: Fix NVIC_SYSH_PRIORITY_STEP define. From Ilya Averyanov.
9862 - LPC43xx: Fix missing #define in eeprom. From Ilya Averyanov.
9866 - Fixed the SPI driver. From Ilya Averyanov.
9870 - LPC31 and SAMA5D EHCI: Fix qh_ioccheck to move bp to next QH. From
9872 - LPC31 and SAMA5D EHCI: Performance improvement: Do not disable the
9878 - gethostbyname(): correct returned address format when DNS is used.
9879 The hostent.h_addr_list should point to raw in_addr or in6_addr
9881 numeric addresses but for DNS lookup returned pointer to whole
9883 - asin(): The function did not convert for some input values. asing()
9884 did not convert for values which do not belong to the domain of the
9891 - Change all references from avsprintf to vasprintf. From Sebastien
9896 - Fix error handling in 'cat' command. On a failure to allocate
9898 - Fix error handling in 'mv' command. On a failure to expand the
9904 - apps/system/netdb: Failed to build if CONFIG_NET_HOSTFILE was not
9910 - Various Kconfig files in netutils: Fix some changes from from
9911 NETUTILS_DNSCLIENT to NETDB_DNSCLIENT. From Pavel Pisa.
9915 - Macros PR_BEGIN_EXTERN_C and PR_END_EXTERN_C were not defined in
9918 NuttX-7.13 Release Notes
9919 ------------------------
9923 that release consists of two tarballs: nuttx-7.13.tar.gz and
9924 apps-7.13.tar.gz. These are available from:
9929 Both may be needed (see the top-level nuttx/README.txt file for build
9936 - External RTC: Added OS support for external RTC chips.
9937 - boardctl(): Add a command to the boardctl() interface to obtain a
9942 - TMPFS: Add support for a new TMPFS, RAM file system. The TMPFS
9945 when files are deleted. A very low overhead way to retain temporary
9947 - VFS: The VFS was extended to support standard file operations on
9949 accomplishes this by creating a temporary characer driver to mediate
9950 the character oriented accesses to tje block driver.
9951 - HOSTFS: Added a HOSTFS file system for use with the simulator. The
9953 proxied access to the file system on the host PC. This is useful for
9956 - MTD/PROCFS: Add an interface to un-register an MTD procfs entry.
9958 - filemtd: A new MTD conversion layer that will convert a regular file
9959 (or driver file) to an MTD device. This is useful for testing on the
9961 - PROCFS: Extended to include networking entries in the procfs. Device
9964 - PROCFS: The PROCFS file system can now be configured so that it
9970 - ST7565 Driver: Extend to include support for the ERC12864-3. From
9971 Pierre-noel Bouteville.
9975 - User buttons: Added a character driver to support application access
9976 to board buttons. Supports notification of button activity via
9978 - User LEDs: Added a character driver to support application access
9979 to on-board LEDs.
9980 - Zero Cross: Added a Zero Cross device driver support. From Alan
9982 - MAX6675: Added support to Thermocouple-to-Digital converter MAX6675.
9984 - BCH: Block-to-character (BCH) driver should forward ioctl() calls
9985 to the contained block driver.
9986 - S25FL1xx: Added a S25FL1xx QuadSPI FLASH driver.
9987 - On-Chip FLASH: Added an upper half MTD device that can use the
9988 interfaces defined in included/nuttx/progmem.h to provide a
9990 - Serial: Implemented high level DMA infrastructure for serial
9992 - AT24XX: Add support for multiple AT24xx EEPROM parts, each with
9994 - External RTC: Added drivers for external I2C RTC chips: DS3102,
9996 - W25: Added support for byte write mode to the W25 FLASH driver. From
9998 - dev/loop: Added a loop character device. losetup() and loteardown()
10000 functions are now available as IOCTL commands to the loop driver.
10001 - dev/smart: Added support for a /dev/smart loop device. From Ken
10006 - Driver Statistics: Most network drivers do not support statistics.
10009 there was no common mechanism to view those statistics. Thus,
10014 have been adapted to use these common statistics.
10018 - W25 FLASH: Added support for W25 FLASH simulation. From Ken Pettit.
10019 - HOSTFS: Added support for the HOSTFS file system (see "File Systems",
10024 - SAME70: Added support for the SAME70 family of chips.
10025 - Tickless: SAMV7 now supports the tickless mode of operation.
10029 - MPU: Added MPU and protected build support.
10030 - QSPI: Added a QuadSPI FLASH driver. This driver operates in the
10031 memory-mapped, Serial Memory Mode (SMM).
10032 - FLASH: Added support to write on-chip FLASH.
10033 - Timer/Counter: TC driver ported to SAMV7 from the SAMA5. Free-running
10034 and one-short timer logic also ported.
10035 - PCK: Brought programmable clock (PCK) logic from SAMA5 into SAMV7.
10036 - Timer/Counter: Support PCK6 as an optional source for the timer/
10041 - SAME70-Xplained: Add NSH and networking configurations for the
10044 - SAMV7-XULT and SAME70-Xplained: If Tickless mode is selected then
10049 - CCM PROCFS: Is no longer a part of the 'base' procfs entries and can
10055 - Timers: Add a compatible lower-half timer driver for use with the
10056 common timer upper-half driver. From Wail Khemir.
10060 - STM32F4-Discovery: Add low level support for the Zero Cross driver
10061 for the STM32F4-Discovery. From Alan Carvalho de Assis.
10062 - STM32F4-Discovery: Add board config to support for the MAX6675. From
10067 - bsearch(): Added the bsearch() function from NetBSD.
10068 - freopen(): Added support for freopen().
10069 - strftime(): Added day-of-week support (when avaialable).
10073 - nxstyle: Add crappy style checking tool nxstyle.c. See thee tools/
10078 - mksmartfs command: Add configuration option to supported multiple
10080 - Add support for 'basename' and 'dirname' commands.
10081 - set command: Like bash, NSH set command now strips off any leading
10083 - mount command: The mount commands now accepts mount options
10086 - losetup command: NSH no longer calls losetup() and loteardown
10089 - ifconfig command: If CONFIG_NETDEV_STATISTICS=y, then print the
10091 - ifconfig, ifup, and ifdown: These commands now uses /proc/net/<dev>
10092 to view network device configuration and status and /proc/net/stat
10093 to show network statistics. A consequence of this is that you
10096 - losmart command: Added a new NSH losmart command. losmart setups
10097 up a loop device for the smart MTD driver similar to losetup but
10099 - ps command: The 'ps' command now uses /proc/<pid>/ to obtain task
10105 - apps/system/hexed: Port the hexed command line hexadeciamal editor
10106 to Nuttx. See http://apps.venomdev.net/hexed/.
10110 - apps/fsutils/smartfs: Move into apps/fsutils from kernel, now uses
10115 - apps/examples/fstest: Add a generic file system test. This is
10119 - apps/examples/zerocross: Add a Zero Cross application example. From
10121 - apps/examples/media: Add a simple test for access of media via a
10130 - Fixed an error in clock_timespec_subtract(). Found by Lok.
10131 - pthreads: CRITICAL BUGFIX: Logic was wiping out the indication that
10133 Found because this was causing a crash when /proc/nnn/cmdline was
10138 - SMART MTD: Fix some Smart wear-leveling bugs. Fixed SmartFS wear
10139 level error that occurs when the logical sector size is too small to
10147 - ILI9432: Fixed errors in orientation. Portrait, RPortrait, and
10153 - CAN: Fix a problem in the CAN upper-half driver that occurs only
10156 S/W FIFOs are both full. In that case, there may be no event to
10159 half driver to avoid this hang condition.
10160 - MS58xx: Fix some issues with initialization and with CRC
10162 - W25: Fixed W25 FLASH driver page read/write logic. From Ken Pettit.
10166 - USART1 pin configuration: Reconfigure System I/O when using USART1.
10168 - MCAN: Added a call to can_txready() to the MCAN driver.
10172 - stm32 F4: Fix some TIM12 pin mappings. From Max Kriegleder.
10176 - STM32F429i-Disco: Calculated partition boundries based on page
10182 - sys/types.h: When building on a 64-bit machine, the size of size_t
10183 should be 64-bits. In general, I believe that sizeof(size_t) should
10184 be the same as sizeof(uinptr_t). mmsize_t should always be 32-bits
10185 in any event. The last change to stddef has been backed out. With
10187 64-bit machine.
10191 - The I/O buffer, g_iobuffer, should not be a global buffer. That
10194 session-specific data defined in nsh_console.h.
10196 NuttX-7.14 Release Notes
10197 ------------------------
10201 that release consists of two tarballs: nuttx-7.14.tar.gz and
10202 apps-7.14.tar.gz. These are available from:
10207 Both may be needed (see the top-level nuttx/README.txt file for build
10214 - modules: Add support for kernel modules: insmod, rmmod, support
10216 - SIGEV_THREAD: Add support for the SIGEV_THREAD notification method
10219 callbacks. See the top-level TODO file for additional details.
10220 - 64-Bit Timer: If the 64-bit timer is selected, then use it whenever
10221 clock_systimer() is called rather then chopping the 64-bit timer
10222 down to 32-bits. Add a new type, systime_t to represent the 32- or
10223 64-bit system timer. This eliminates clock_systimer32() and
10228 - Telnet Driver: Move the Telnet driver from apps/ to
10233 character devices at /dev/telnetN to support Telnet sessions.
10234 - PCA9635PW: Add a driver for the PCA9635PW I2C LED driver IC which
10235 can be used to control the intensity of up to 16 LEDs. From
10237 - MCP9844: Driver for the MCP9844 I2C digital temperature sensor with
10239 - PN532: Add driver for the NXP PN532 NFC-chip. From Janne Rosberg
10241 - LSM9DS1: Add driver for the STMicro LSM9DS1 chip. The LSM9DS1 is a
10242 system-in-package featuring a 3D digital linear acceleration sensor,
10245 - CAN Interface: Add more extensive error reporting capaibility to
10247 - SPI Interface: Add an optional hwfeatures() method to the SPI
10252 - NSH configuration uses the custom start up scriptwith a read-only
10255 * ARMv7-R
10257 - ARMv7-R: Add basic architecture support for the ARMv7-R processor
10262 - Atmega2560: Add support for the Atmega2560. From Dimitry Kloper.
10263 - debug.h: Add an AVR-specific header file used when the AVR MEMX
10268 - Arduino-Mega2560: Add support for the Arduino-Mega2560. From
10273 - Port the TRNG driver from the SAMA5D3/4 to the SAMV7.
10274 - Port the WDT driver from the SAMA5D3/4 to the SAMV7.
10275 - Add an RSWDT driver.
10279 - SAMV71-XULT: Add configuration for testing OS modules.
10283 - MK60N512VLL100: Add support for the MK60N512VLL100 Kinetis part.
10288 - ENET: Numerous updates to the Kinetis ENET driver. That driver is
10293 - WaveShare LPC4337-WS: Support for the WaveShare LPC4337-WS board.
10298 - Timer Capture: Add timer input capture driver. From Pierre-Noel
10303 - Olimex STM32 H407: Added a port to the Olimex STM32 H407 board.
10309 - TI LaunchXL-TMS57004: Add basic board support for TI LaunchXL-
10314 - sys/time.h: Add timeradd(), timersub(), timerclear(), timerisset(),
10315 and timercmp() as macros. These are non-POSIX interfaces, but
10317 - AVR support: Introduce support for Atmel toolchain in-flash strings.
10318 Atmel toolchain AVR compiler provides a transparent in-flash object
10319 support using __flash and __memx symbols. The former indicates to
10320 compiler that this is a flash-based object. The later used with
10322 flash or in RAM. The compiler automatically makes 32-bit pointer
10324 and generates code to access either in run-time. Thus, any function
10328 AVR this allows to move all constant strings used in trace messages
10329 to flash in the instruction address space, releasing resources for
10334 types equivalent to, for example, 'const char' and 'const char*'.
10339 - debug.h: Add configuration to support an architecture-specific
10341 - netdb: Add support for the use of a DNS resolver file like
10343 - TEA: Add an implementation of the Tiny Encryption Algorithm.
10344 - math32.h: Add some utilities to support 64-bit arithmetic
10349 - tools/cnvwindeps.c: Add a tool that will convert paths in
10352 - tools/mkwindeps.sh: A script that coordinates use of cnvwindeps.exe.
10358 - Module Commands: Add module commands: insmod, rmmod, and lsmod.
10359 - Time Command: Add a 'time' command that may be used to time the
10361 - Password Commands: Add useradd, userdel, and passwd commands.
10362 - MOTD: Now supports a Message of the Day (MOTD) that will be
10364 - Session Logins: All sessions may be protected with logins using the
10366 - Extended Logins. Added optional platform-specific function to
10372 - apps/fsutils/passwd: Utility library for accessing a password file
10377 - apps/netutils/telnetd: Now creates Telnet sessions by opening a new
10378 factory device at /dev/telnet and then using ioctl calls to create
10380 - apps/netutils/netlib: Add netlib_get_dripv4addr() and
10385 - apps/examples/module: Add a test harness for verifying NuttX kernel
10387 - apps/examples/pca9635: Add a simple test of PCA9635PW PWM LED driver.
10389 - apps/examples/ostest: Add a test of POSIX timers using SIGEV_THREAD.
10397 - pthreads: CRITICAL BUGFIX: Logic was wiping out the indication that
10399 - waitpid: CRITICAL BUGFIX. Add a reference count to prevent waitpid
10400 from using stale memory released by the waited-for task group.
10401 - clock_systimespec(): Fix an error in a time conversion.
10405 - poll(): Fix handling of sem_tickwait() return value sem_tickwait()
10406 does not return an -1+errno, it returns a negated errno value.
10411 - TUN Driver: Fix a compile time error in the TUN driver. From
10413 - USB Host HID Parser: Wrong size used in memcpy(). From Hang Xu.
10414 - PCA9555: Fixed a bug in the function pca9555_setbit which occurs if
10415 someone tries to set one of the pins 8-15. The problem is that
10418 call to the I2C_WRITE buf[0] is used as address but this address is
10420 to the register in the ioexpander and not the I2C address. From
10425 - TCP/IOB: Numerous fixes, mostly relate to TCP and IOB buffering
10427 networking later to be stable in some stress testing. From Andrew
10432 - USBHS Device: In USBHS device driver, fix check if zero length
10437 - OTG FS Host: Fix some backward arguments to stm32_putreg(). Note
10442 - tools/mkdeps.c: Extended/fixed support for --winpath option.
10447 - apps/platform/Makefile: Use a relative path to the board directory
10452 NuttX-7.15 Release Notes
10453 ------------------------
10457 that release consists of two tarballs: nuttx-7.15.tar.gz and
10458 apps-7.15.tar.gz. These are available from:
10463 Both may be needed (see the top-level nuttx/README.txt file for build
10470 - Add a state variable that provides the current level of OS
10471 initialization. This is needed by some logic that may attempt to
10472 run early in the start-up sequence but cannot run if a sufficient
10474 - Spinlocks: Add interface definitions for to support spinlocks as
10475 needed for multi-CPU configurations.
10476 - SMP support. Support for Symmetric Multi-Processing (SMP) added.
10479 interfaces to support CPU initialization and inter-actions, and
10480 new application interfaces to manage CPU affinity. The changes
10481 are too extensive to summarize here; see the SMP Wiki page at
10487 - TLS: Basic definitions needed to support thread local storage
10490 - Performance Monitoring: Add a configuration option to buffer
10491 RTOS instrumentation data in an in-memory buffer.
10492 - boardctl(): Add boardctl() support that will permit applications
10493 to control USB devices.
10497 - procfs: Add /proc/kmm entry that shows that state of the kernel
10500 - procfs: Add support for showing CPU in the tast status if SMP is
10505 - ARP: Add support for IOCTL commands to manage the ARP table.
10506 - IEEE 802.15.4 and 6LowPAN: There are some radio drivers and a
10509 NuttX repositories. Hopefully in NuttX-7.16.
10513 - ADS1242: Driver for the 24-Bit Differential Input ADC ADS1242 that
10518 - U-Blox Modem: Add an upper half driver for the U-Blox Modem. From
10520 - I2C: Add an I2C, "upper half", character drivers to support raw I2C
10522 - RGB LED: Add a driver to manage a RGB LED via PWM. From Alan
10524 - Performance Monitoring: Add a character driver that will allow an
10525 application to read buffered scheduler instrumentation data.
10529 - SMP: Add multi-CPU support to the simulation to support SMP
10534 * ARMv7-A, ARMv7-R, and ARMv7-M:
10536 - ARMv7-A, ARMv7-R, and ARMv7-M: Add test-and-set logic and
10537 definitions needed to supports spinlocks.
10538 - ARMv7-A: Added MPCOre Generic Interrupt Controller (GICv2) and
10540 - ARMv7-A: Now includes in MCU-specific hooks needed for SMP support.
10544 - HSMSI: HSMCI driver can now be configured to handle unaligned data
10549 - I2C: Backported the LPC43XX I2C driver, replacing the LPC11XX,
10555 - Support for the u-blox GSM and GPS module evaluation board with
10556 NXP LPCExpresso LPC1768. The GSM module is one of LISA-C200,
10557 LISA-U200 or SARA-G350. The GPS module is one of MAX-M7 or
10558 MAX-M8. From Vladimir Komendantskiy.
10562 - Basic support is in place for the i.MX6 Quad/Dual MCUs.
10567 - Sabre-6Quad: Basic support for the NXP/Freescale Sabre 6Quad
10572 - STM32F46xx: Support for STM32F46xx from Paul Alexander Patience
10573 - STM32L4: Add support for the STM32L4 family. From Sebastien
10578 - STM32F4 Discovery: Add PWM support for the onboard RGB LED. From
10580 - Nucleo-L476: Add support for the Nucleo-L476 board. From Sebastien
10582 - STM32L476VG Discovery: Add support for the STM32L476VG Discovery
10587 - tools/refesh.sh now has a --silent option so that it can be used in
10592 - Added a 'make olddefconfig' target that will refresh a .config file
10597 - 'arp': Add an 'arp' command that will support access to the OS ARP
10599 - 'ps': The 'ps' command will show CPU if SMP is enabled.
10603 - apps/netutils/chat: Chat logic contributed by Vladimir
10605 - apps/netutils/netlib: Add utility functions to support accesses to
10610 - apps/examples/chat: Chat example contributed by Vladimir
10612 - apps/sysem/ubloxmodem: Example to control the power
10614 - apps/examples/leds: An example to demonstrate use of LED driver.
10615 - apps/examples/smp: Add a test to verify SMP configurations.
10616 - apps/examples/rgbled: Example using the RGB LED driver to drive an
10618 - apps/examples/ostest: Add a test of TLS.
10619 - apps/examples/sched_note: Add a simple example to exercise the
10628 - Signals: Move the list of signal actions from the TCB to the group
10632 - Semaphores: Add an internal, non-standard interface to reset a
10633 semaphore count. This is sometimes needed by drivers in order to
10637 - Low-Priority Work Queue: Fix logic to find an IDLE worker thread;
10642 - FAT: Add an option to force all transfers to be performed
10646 - MTD: Increase block size in mtd_geometry_s to 32-bits.
10650 - I2C: Restructured the I2C interface as necessary to eliminate some
10651 thread-safety issues inherent in the legacy I2C interface design.
10652 This effects the interface definition, all I2C clients, and all low-
10654 of this magnitude to introduce some errors. Any bug reports of bug
10656 - I2C_RESET: Eliminate up_i2creset(). It should not be a global
10658 - PCA555: Add logic to make the PCA555 driver thread safe.
10659 - syslog: If syslog timestamping is enabled, don't try to get the time
10661 - AT24xx driver: Correct missing address calculation logic. From Frank
10666 - Networking drivers that support CONFIG_NET_NOINTS: Fix a race
10667 condition that can cause the TX poll timer to stop running. From
10669 - Timer Poll: Fix some logic when there are multiple network
10670 interfaces. In this case, TCP timeout events can really only being
10675 - SAMV7 USB HS device: The USB driver has had some issue that would
10678 causing hangs. The basic problem is that the number of busy banks
10686 - tools/testbuild.sh: .config files were not being updated because
10687 (a) kconfig-conf was being called in the wrong directory and (b)
10693 - apps/system/i2c: The I2C tool now obeys it OS interfacing: it now
10694 uses an I2C character driver to access the I2C bus.
10695 - apps/system/cdcacm, usbmsc, and composite: Use new boardctl()
10700 - apps/netutils/dhcpd: DHCPD no longer calls directly into the OS but
10701 uses the new network IOCTL commands to modify the ARP table.
10705 - apps/modbus/nuttx/portserial.c: Was not returning an error on
10706 failure to open the device driver. From Olololshka kokoko.
10710 - apps/examples/usbserial, composite, usbterm: Use new boardctl()
10717 - Moved C++ initialization logic out of the RTOS and into the
10718 application space, specifically to apps/platform/board, where it
10721 NuttX-7.16 Release Notes
10722 ------------------------
10726 that release consists of two tarballs: nuttx-7.16.tar.gz and
10727 apps-7.16.tar.gz. These are available from:
10732 Both may be needed (see the top-level nuttx/README.txt file for build
10739 - Power Management: Add activity domain to all PM interfaces and
10745 - board_app_initialize(): board_app_initialize() now accepts an
10746 argument that may be used to support initialization in different
10751 - N25Qxxx: Add MTD support for Micron N25Qxxx family of QSPI flash.
10753 - SST26F: Add an MTD driver for SST26F spi/qspi flash devices (SPI
10755 - File Descriptor Detach: Add logic to detach a file structure from a
10757 open file or driver to be used across multiple threads.
10761 - listen()/accept(): Separate out psock_listen() and psock_accepti()
10764 - VNC Server: Add support for a VNC server. This logic is code
10769 - Framebuffer driver: Add a display number to each interface in order
10770 to support multiple display devices.
10771 - VNC Server: Add support for a VNC server. This logic is code
10773 - LCD Backpack: Add support for PCF8574 LCD Backpack driver. This
10775 expander and supports the HD44780-based (or compatible) LCD modules.
10783 - RTC: Simplify the RTC interface. The old interface was way too
10785 - BH1750FVI: Add a character driver for Rohm Ambient Light Sensor
10787 - CAN: Improve CAN error reporting. From Frank Benkert.
10788 - aes.h: Modifications to the crypto API needed for LPC43xx. From
10790 - ADC: Interface no longer uses global adc_receive() call. Added a
10791 new bind() method to the ADC interface. Now the ADC upper half
10792 driver will register its receipt-of-data callback. This change
10793 allows the ADC lower half driver to be used with a differ ADC upper
10798 - Linux Host Networking: Enhance networking support for the
10802 * ARMv7-A, ARMv7-R, and ARMv7-M:
10804 - ARMv7-M: Convert more assembly language files for use with the IAR
10806 - ARMv7-A: Complete re-design of SMP-related logic to initialize each
10811 - Add a JTAG config and ERASE config to Kconfig to set the
10813 - System Reset: Add the up_systemreset interface to the samv7 arch. The
10815 and allows the user to set if, and for how long, to drive External
10817 really should be done in the config's src if CONFIG_BOARDCTL_RESET
10822 - SAMV71-XULT: Add configuration(s) that were be used to verify VNC
10827 - Sabre-6Quad: The basic i.MX6 port is complete. This is a minimal
10828 port at present and probably still has some as-of-yet-undiscovered
10830 - Sabre-6Quad: Basic SMP NSH configuration is now working. But this
10833 Sabre-6Quad README.txt file.
10837 - LPC4337jet100: Add definitions for the LPC4337jet100 chip. From
10842 - AES: Add AES support. From Alexander Vasiljev.
10846 - STM32 L4: Add configuration options to allow SRAM2 to be used for
10847 heap, or not at all, and to zero-initialize it on OS start, or not
10849 - STM32 L4: Add support for HSE and MSI clocks, and auto trim of MSI
10850 to LSE (needed for USB). From Dave (ziggurat29)
10851 - STM32 L4: Add support for unique id function to arch; modified board
10852 to support unique id boardctl. From Dave (ziggurat29)
10856 - STM32 F4 RTC: Add a custom RTC driver with support for alarms. From
10858 - STM32 L4 QSPI: Add a QSPI driver with DMA support and (optional
10860 - STM32, STM32 L4, and STM32 F7 Serial: Add support for compliant
10861 SD-style breaks. From David Sidrane.
10862 - STM32 L4 CAN: Add CAN support for STM32L4. From Sebastien Lorquet.
10863 - STM32 1-Wire: Add support for a custom 1-wire driver. The serial
10864 driver already supports a 1-wire interface, but this driver uses the
10865 same serial logic to implement a lower half driver much like the
10867 - STM32 L4 SPI: Add support for SPI 4 and 5 on stm32f411 chips. From
10869 - STM32 ADC: Allow omitting use of channels in a lower part of PWM.
10870 From Pierre-noel Bouteville.
10871 - STM32 L4 I2C: Get I2C working for STM32L4. From Dave (ziggurat29).
10875 - STM3220G-EVAL: Add support for both the IAR and uVision GCC IDEs.
10877 - STM32F429I Discovery: Add support for the uVision GCC IDE. From
10879 - STM32F4 Discovery: Integrate BH1750FVI driver in the STM32F4 Discovery
10881 - STM32L476VG Discovery: Add support for QSPI based N25Qxxx flash.
10883 - STM32L476VG Discovery: Add board ioctls for allowing user application
10884 to cause QSPI memory mapped mode to be engaged and disengaged. Also
10887 - Nucleo-144: Basic port for the Nucleo-144 board with the STM32F746ZG
10889 - STM32F103 Minimum: Add support for this minimual STM32F103CBT6 "blue"
10891 - STM32F411E Discovery: Add basic configuration for stm32f411e-disco
10896 - Moved NuttX repository to https://bitbucket.org/nuttx/nuttx.
10897 Eliminated use of sub-modules.
10898 - Add support for the IAR toolchain for the limited case of the ARMv7-M
10900 - make export: Pass top-level make to the script to allow -j greater
10902 - fs/Kconfig: Allow CONFIG_FS_WRITABLE to be manually selectable. This
10905 - arch/*/Makefile: Add definitions that can be overrided to use GCC
10910 - apps/netutils/esp8266: ESP8266 driver application. From Pierre-noel
10915 - apps/examples/alarm: Add a simple test of the ALARM iotcl calls of
10917 - apps/examples/nximage: Add a configuration option to select
10922 - apps/platform/nucleo-144: Add platform files for NUCLEO-144
10923 (NUCLEO-F746ZG). From Mark Olsson.
10924 - apps/examples/media: You can now override the default device driver
10928 Works-In-Progress:
10931 introduced in NuttX-7.15. Work has continued on this effort on
10934 least NuttX-7.17.
10937 needs to be done.
10945 - Various places: Search for places where a stray semicolon following
10946 an if condition cause the if body to be executed unconditionally.
10948 - enter/leave_critical_section() may attempt to access task lists
10953 - SMART MTD: Return code of smart_scan not checked, can cause success
10954 result in failure case, leading to 'dev' pointer being invalid. From
10956 - mount: Fix a backward debug assertion. Noted by David Sidrane.
10960 - NRF24L01: Fix backward calculation of relative frequency. Noted by
10962 - PCA9555 I/O expander: Fix an error in the PCA9555 driver: Under
10963 certain error conditions, interrupts were not being re-enabled.
10965 - ADS1255: Must not do SPI access from interrupt handler. Use the
10967 - Several SPI-based drivers modified. All drivers that use SPI must
10969 - MS583730: Fix a bug in crc computation for ms583730. Implement
10974 - Fix typo in MATRIX register definitions. From Stefan Kolb.
10975 - SAMV7 Tickless Mode: This is a fix to a problem in the handling of
10976 the oneshot timer. Due to a wrong assumption concerning the behavior
10980 of the timer, but this is not true. To start the time/counter a
10982 sets the counter register to zero, but the reset of the counter
10983 register is not performed instantly. According to the datasheet:
10985 value passes to zero on the next valid edge of the selected clock."
10986 Thus the counter is set to zero between 0 and USEC_PER_TICK
10988 In my fix I use the freerun count value to determine if at least one
10990 the oneshot counter is correct. I also tried to use the function
10991 up_timer_gettime(�) to achieve this but, at least if compiled with
10997 is between 0 and USEC_PER_TICK microseconds too long. To fix this I
10999 one tick and otherwise set the remaining time to zero. By doing so
11005 - SAMA5: Stefan Kolb's change to the SAMV7 Oneshot Timer should also
11006 be applied to the SAMA5 oneshot time since the drivers are identical.
11010 - SAM3/4: Stefan Kolb's change to the SAMV7 Oneshot Timer should also
11011 be applied to the SAM3/4 oneshot time since the drivers are identical.
11015 - SAMV7 TWIHS (as well as SAM3/4 and SAMA5: Ensure that the TWIHS
11019 while back in the stm32 family, so there may be more arch-es with
11023 - USBHS Device: Remove disabling of whole USB on suspend of USBHS.
11025 suspend interrupt. Its enough to freeze the clock instead. When
11026 disabling the whole peripheral, the next wakeup-interrupt comes up
11032 - MCAN: Fix missing unlock of device in MCAN mcan_txempty(). From
11037 - STM32 L4 Clocking: Problem with resetting backup domain clears
11038 clocking options set up before in *rcc.c use INITS flag to avoid
11039 magic reg value to detect power up reset state of RTC correct a
11046 - STM32L4 SPI: That STM32Lr SPI driver is quite different. They now
11048 before a new bit has to be set (RX fifo threshold) to handle <= 8-bit
11049 transactions. If not set, the default is 16-bit packed >=8-bit
11050 frames and the RXNE bit is never set (it is set when 16-bits are
11051 received). weird things as always. This also add 8-bit access
11052 routines to the data register, because a 16-bit access to the data
11055 - STM32: Correct some bad commits that broke the LTDC display example.
11057 - STM32 F4 RTC: Fix logic in F4 RTCC driver that prevent ALARM
11059 - STM32 F1 ADC: Fix STM32 ValueLine ADC IRQ number selection. From
11064 - STM32F429I Discovery: Correct some bad commits that broke the LTDC
11069 - GPIO Interrupts: Fix a bug of GPIO falling-edge interrupt for tiva.
11074 - math: Add a NAN test on 'x' in asin function of lib_asin.c. Suggested
11075 by Pierre-noel Bouteville.
11079 - Several Makefiles: Add .PHONY definitions to prevent 'clean up to date'
11080 message weirdness when 'make clean' is done with no .config or
11083 NuttX-7.17 Release Notes
11084 ------------------------
11088 that release consists of two tarballs: nuttx-7.17.tar.gz and
11089 apps-7.17.tar.gz. These are available from:
11094 Both may be needed (see the top-level nuttx/README.txt file for build
11101 - drivers/mtd: Add a driver of IS25xP SPI flash devices. Based on
11106 - Break out internal interface psock_ioctl().
11110 - PTYs: Added support for pseduo-terminals: Device drivers that can be
11111 used for communications between tasks (usually with re-directed I/O).
11113 - Button upper half driver: Added support for poll().
11114 - CAN: Add support for poll. From Paul Alexander Patience.
11115 - GPIO: Add support for a simple GPIO driver. It supports only pre-
11117 output operations. Interrupt events can lead to notification via a
11119 - I/O Expander: Shadow-Mode: The output- and configuration registers of
11120 the IO-Expander are held in the microcontrollers memory and only
11121 written to the IO-Expander. This reduces bus traffic and is more
11122 error-proof than the normal read-modify-write operation. Retry Mode:
11123 If enabled and an error occurs while writing to the IO-Expander the
11126 - Pipes/FIFOs: Add support to allocating different sizes for pipe and
11128 and pipe(), but allow control of the size of the underlying, in-memory
11129 circular buffer. Move pipe() and mkpipe() to the C library, they are
11131 logic to support, configurable, smaller buffers for PTYs.
11135 - SYSLOG: Consolidated all SYSLOG logic in drivers/syslog. Added an
11138 transition to another SYSLOG output when the OS has initialialized,
11142 usable with other-than-FLAT builds.
11143 - SYSLOG: syslog() will now automatically redirect output to
11145 - Extended SYSLOG logic so that we can send SYSLOG output to a file.
11146 - SYSLOG character device channel will now expand LF to CR-LF.
11148 - Add a SYSLOG character device that can be used to re-direct output
11149 to the SYSLOG channel (Not be be confused the SYSLGO output to a
11151 - Debug features are now enabled separately from debug output.
11154 respectively. This also applies to all of the variants as well,
11162 - Since the SYSLOG layer now automatically handles low-level vs.
11163 high-level output, the low-level (ll) variants of the debug macros
11165 - Reviewed all uses of *err(). These macro family should indicate
11166 only error conditions. Convert *err() to either *info() or add
11168 - _alert(): New debug macro: _alert(). This is high priority,
11169 unconditional output and is used to simplify and standardize crash
11171 - Many CONFIG_DEBUG_* options did not have matching macros defined in
11178 - Added the simulated QSPI (N25Q) flash to the simulation and extened
11179 flash simulation capabilities to run with MTD drivers based on config
11184 - SPI: SPI-Freq. 40MHz; VARSELECT; hw-features This change adds the
11187 o Increase the allowed SPI-Frequency from 20 to 40 MHz.
11190 defined in a Kconfig file. The change renames it to
11194 (single device) to "variable peripheral selection" (multiple
11196 o Add a new Function to the interface to control the timing and
11199 the first bit, between the last bit and the de-assertion of the
11200 ChipSelect and between two ChipSelects. This is needed to tune
11202 o Add three "hw-features" for the SAMV7, which controls the behavior
11204 - force CS inactive after transfer: this forces a (short) de-
11207 - force CS active after transfer: this forces the CS to stay
11209 Btw.: this is a prerequisit to make the LASTXFER bit working
11211 - escape LASTXFER: this suppresses the LASTXFER bit at the end
11212 of the next transfer. The "escape"-Flag is reset automatically.
11215 - TWISHS: Driver improvements from Michael Spahlinger.
11216 - GPIO-Driver fixed for Open-Drain Pins:
11219 back. This is extremely important for Open-Drain Pins, which
11221 o Re-Implemented twi_reset-function and enhanced it so it can be
11223 o Glitch-Filter: Added a configuration option to enable the twi-
11224 built-in glitch filter
11225 o Added a "Single Master Mode": In EMC Testing the TWI-Bus got
11226 stuck because the TWI-Master detected a Multi-Master access (but
11232 With the above changes I�C-Bus reliability in harsh environments (eg.
11233 EMC) is greatly improved. The small change in the GPIO-Driver was
11235 status of Open-Drain Outputs and this is needed by the twi_reset
11240 - EMC: Extend LPC43xx EMC code to support SDRAM on a dynamic memory
11245 - Kinetis K64: Add basic support for the K64 family. I leveraged the
11246 changes from https://github.com/jmacintyre/nuttx-k64f and merged
11252 - Add a KinetisUSB device controller driver. Derived from the pic32mx
11254 - Kinetis pwm support, based on the KL pwm driver. From kfazz.
11255 - Kinetis Ethernet: Add support for the KSZ8081 PHY.
11256 - Kinetis Ethernet: Modified Ethernet driver to try all PHY addresses
11258 This means that you no longer have to specific the PHY address in
11260 - Kinetis Ethernet: Add support for CONFIG_NET_NOINTS. The driver no
11262 work to the high-priority work queue.
11266 - Teensy-3.x: Add USB support and a usbnsh configuration.
11267 From kfazz (2016-06).
11268 - Freedom-K64F: Add support for the NXP Freedom-K64F board at 120MHz.
11270 code from https://github.com/jmacintyre/nuttx-k64f which was, itself,
11273 and updates to match more recent BSPs.
11274 - Freedom-K64F: Added a configuration that supports networking.
11278 - STM32 F1-4: Added support for the STM32F105R. From Konstantin
11280 - STM32 F4: Added support for the STM32FF76xxx and STM32FF7xx
11282 - STM32 F1-4: Add support for Tickless mode (two timer
11284 - STM32 L4: Add support for tickless OS, and incidentally timers,
11285 PWM, oneshot, free-running.... From ziggurat29.
11289 - STM32 F1-4: Add the up_getc() function to STM32 in order to support
11291 - STM32 F7: Add SPI driver. From David Sidrane.
11292 - STM32 F7: Add SPI, I2C, and ADC drivers. From Lok Tep.
11293 - STM32 L4: Add ioctls to set/get CAN bit timing in stm32l4. Add
11294 ioctl hooks to allow future management of can id filters. From
11296 - STM32 L4: Add some CAN mode IOCTL calls. These will be useful for
11300 - STM32 F1-4: Port STM32L4 CAN IOCTLs to STM32. From Sebastien Lorquet.
11301 - STM32 L4: Implementation of loopback IOCTLs. From Sebastien
11303 - STM32 F7: Added SDMMC1 support for stm32F7 74-75. From Lok Tep.
11304 - STM32 F7: Add USB support. From Lok Tep.
11305 - STM32 F7: Added PWR, RTC, and BBSRAM support for stm32f7. From David
11307 - STM32 F7: Added STMF7xxx RTC. From David Sidrane.
11308 - STM32 F7: Added STM32F7 DBGMCU. From David Sidrane.
11309 - STM32 L4: Port support for both RX FIFOs from STM32 CAN. From Paul
11314 - Added a minnsh configuration for the STM32F103-Minimum board. From
11316 - Added support for the Nucleo-F767ZI board. From David Sidrane.
11317 - Nucleo-144/Nucleo-F767ZI: Add test for STM32 F7 SPI. From David
11319 - Nucleo-144: Added SDMMC support to Nucleo-144. From David Sidrane.
11320 - Olimex STM32-E4077: Add support for Olimex STM32 E407 board. From
11322 - Nucleo-144: Added USB OTG device to Nucleo-144. From David Sidrane.
11323 - Nucleo-144: Added bbsram test to Nucleo-144. From David Sidrane.
11324 - STM32F4 Disovery: Add CAN support for STM32F4 Discovery. From
11326 - STM32F4 Disovery: added a canard configuration files. From
11328 - STM32F4 Discovery: Add FPU support for ostest for the STM32F4
11330 - STM32L476 Discovery: Update stm32l476 disco to include init code for
11336 - include/assert.h: Check if NDEBUG is defined. From Paul Alexander
11338 - assert.h: Define static assert for C++ usage. From Paul Alexander
11340 - Add crc64 support. From Paul Alexander Patience.
11341 - hex2bin: Move the portable library portion of apps/system/hex2bin
11343 boot-loader builds.
11344 - Add raise().
11345 - libm: This change should significantly improve the performance of
11347 majority of changes have to do with preventing the compiler from
11348 needlessly promoting floats to doubles, performing the calculation
11349 with doubles, only to demote the result to float. These changes only
11351 - printf(): If there are no streams, let printf() fall back to use
11353 - Move pipe() and mkpipe() to nuttx/libc, they are no
11355 to support, configurable, smaller buffers for PTYs.
11356 - Move driver-related files from include/nuttx to include/nuttx/drivers.
11359 - include /nuttx/lib: Move library-related files from include/nuttx to
11364 - Custom Board Configuration: Add logic to support custom board
11369 - Remove the includes/apps link to apps/include. It is no longer
11374 - tools/tesbuild.sh will now build NxWM configurations.
11378 - Change to the way that apps/ Kconfig files are generated in
11379 order to better support reuse of the apps/ directory in NuttX
11381 make.defs, Add empty preconfig rules to 'leaf' makefiles, Use
11385 - apps/include directory structure reorganized. There are no longer
11386 any header files in the apps/include/. directory. Rather, sub-
11387 directories were added to match the partitioning of apps/ sub-
11389 sub-directory. This change is intended to help with some changes
11391 - Call all includes from <apps/bla/bla.h> to "bla/bla.h". From Sebastien
11393 - Add apps/include to include path in top-level Make.defs file.
11397 - Make NSH net-initialization be a configuration option. From Marten
11399 - Add NTP client initialization in NSH network startup logic. From
11401 - 'ps' command now prints out the stack usage if stack coloration is
11403 - Allow stack usage to be disabled on constrained systems. From David
11408 - NTP Client: Add retries. From David S. Alessio.
11409 - NTP Client: The NTP client will now optionally use pool.ntp.org as
11410 the NTP server; and reset the retry count upon success -- more robust.
11412 - ESP8266: Add logic to set the BAUD rate. From Pierre-noel Bouteville.
11413 - ESP8266: In Kconfig, select ARCH_HAVE_NET when NETUTILS_ESP8266 is
11415 output. From Pierre-noel Bouteville.
11419 - flash_eraseall: IOCTL wrapper for MDCIO_BULKERASE command. Was in
11420 nuttx/drivers/mtd. Moved to apps/fsutils because the call directly into
11425 - canlib: Basic CAN utility library. From Sebastien Lorquet.
11429 - flash_eraseall: Now uses the IOCTL wrapper at apps/fsutils/flash_eraseall.
11433 - Add platform files for Olimex STM32 E407. From Mateusz Szafoni.
11437 - apps/examples/canard: Add canard example application. From
11439 - apps/examples/pty_test: PTY test program. From Alan Carvalho de
11442 Works-In-Progress:
11445 introduced in NuttX-7.15. Work has continued on this effort on
11448 least NuttX-7.18.
11451 needs to be done.
11459 - semaphores: Need to set errno to EINVAL on errors in sem_post()
11464 - Several MTD FLASH drivers nullify the freed 'priv' structure and
11465 failed to return NULL as stated in the comments. Result, will
11467 - VFS ioctl(). Per comments from David Sidrane, file_ioctl() should
11470 - SST26 Driver: Before accessing the sst26 flash, the "Global Unlock"
11471 command must me executed, which I do in the sst26 driver. BUT re-
11472 reading the datasheet, the WREN instruction is required to enable
11475 happen at all, the flash is half-enabled! From Sebastien Lorquet.
11476 - N25Qxx Driver: Alter the notion of 'blocksize' to be equivalent to
11477 'flash write page size' in order to align with assumptions in the
11482 - SmartFS: Fix a 32-byte memory leak. From Ken Pettit.
11483 - SMART MTD layer: Fixes freesector logic error when sectorsPerBlk=256,
11490 - USB CDC/ACM Device Class: cdcacm_unbind leaks write request objects.
11491 This arises due to freeing the bulk IN endpoint before the loop
11494 the bulk IN enpoint will cause the first param to be NULL, thereby
11495 bypassing the free operation. To fix, I moved the release of the
11496 bulk IN endpoint until after to loop (much as was the case for the
11499 - Pipes and FIFOs: Add missing configuration for pipe ring buffer
11501 - UART 16550: Handle when CONFIG_SERIAL_UART_ARCH_IOCTL is not
11503 - Common Serial Upper Half: Fix a race condition noted by Stefan
11510 to be removed from an empty TX buffer.
11511 - USB MSC Device Class: Add locks when removing request from queue.
11513 - USB MSC Device Class: Fix reversed logic on waiting for SCSI thread
11522 - Correct conditional compilation in ST7565 LCD driver. From Pierre-
11527 - In both IPv6 and IPv4 incoming logic: (1) Should check if the
11528 packet size is large enough before trying to access the packet
11530 length and the full packet length, need to subtract the size of
11533 - TCP Networking: While working with version 7.10 I discovered a
11534 problem in TCP stack that could be observed on high network load.
11536 unnecessary case, in which between loss of some TCP packet and its
11540 retransmission starts, NuttX is correctly issuing next TCP packets,
11546 to conn->isn + conn->sent, which is truth only if no further
11549 if (ackseq <= unackseq)is not met, and, as a result, we are going to
11552 * ARMv7-M:
11554 - ARM stack check: Fix double fault on IDLE task with stack size = 0.
11559 - CAN: CAN Message Filtering fixed: (1) stdfilters didn't work because
11560 the filter was never enabled (wrong number of bits to shift), and
11572 - Fix some errors in AFEC header file. From OrbitalFox.
11573 - DAC: DACC_WPMR_WPKEY_MASK -> DACC_WPMR_WPKEY. From Wolfgang
11575 - Timer: Fix ops check in TCIOC_STOP. From Wolfgang Reissnegge.
11576 - I2C: Fix reversed logic in twi_startmessage(). From Wolfgang
11578 - SAM3/4 UDP: Fix handling of endpoint RX FIFO banks. This fixes
11584 - USBHS Device: This change solves a problem which causes data loss
11587 leads under some circumstances to situations in which an DMA
11590 USBHS_EPSTATE_SENDING_DMA for the fix. To reproduce the problem, I
11596 - Timers: Support up to 8 channels per timer. From kfazz.
11600 - Teensy 3.x clock fixes: The High Gain bit in MCG_C1 was preventing
11602 change doesn't appear to change any functionality, but complies with
11603 restrictions in the k20 family reference manual on FEI -> FBE clock
11608 - LPC17 Ethernet: Needs to correctly ignore PHYID2 revision number
11613 - Fix errors in GPIO interrupt logic. From v01d (phreakuencies)
11614 - Ethernet: Correct auto-negotiation mode in the LPC43xx Ethernet.
11616 - Writing zero to NVIC_IRQ_ENABLE has no effect. Disable interrupts
11618 - SPIFI: If CONFIG_SPIFI_SECTOR512 undefined, lpc43_bwrite doesn't do
11623 * Qemu-i486:
11625 - Fix qemu-i486/ostest/Make.defs test for M32. From Heath Petersen.
11629 - Fix EFM32 FLASH conditional compilation. From Pierre-noel
11631 - Writing zero to NVIC_IRQ_ENABLE has no effect. Disable interrupts
11636 - STM32 F1-F4: In PWM driver, just update duty if frequency is not
11638 only duty is frequently changed. From Pierre-noel Bouteville.
11642 - STM32 F7: Fixed STM32F7 DMA stm32_dmacapable. DMA working on SDMMC.
11644 - STM32 F1-F4 Timer Driver: Change calculation of per- timer pre-scaler
11646 - STM32 F1-F4: Correct conditional compilation in STM32 timer capture
11647 logic. From Pierre-noel Bouteville
11648 - STM32 F1-F4: Fix STM32 DMA code and configuration for STM32F37X chips.
11650 - STM32 F1-F4: Fix compilation errors in debug mode of stm32_pwm.c.
11652 - STM32 F1-F4: Correct the CAN2 RX IRQ number for stm32f10xx chips.
11654 - STM32 F1-F4: Move backup domain reset to earlier in the
11655 initialization sequence (stm32_rcc.c() in order to avoid disabling
11657 - STM32 F1-F4: When configuring a GPIO via stm32_configgpio() the
11658 function will first set the mode to output and then set the initial
11660 externaly pulled-up pin, this would lead to a glitch on the line
11664 - STM32 F7: Apply Pascal Speck's GPIO STM32 change to STM32 L4.
11665 - STM32 L4: Apply Pascal Speck's GPIO STM32 change to STM32 L4.
11667 - STM32 F7: BUGFIX: PLLs IS2 and SAI P Calculation. From David
11669 - STM32 L4: STM32 CAN fixes need to be backported to STM32L4 as well.
11670 - STM32 F1-F4 and L4: Writing zero to NVIC_IRQ_ENABLE has no effect.
11673 - STM32 F7: STMF7xxx RTC: (1) Remove proxy #defines, (2) Ensure the
11681 on STM32 and if needed rippled to the STM32 families. From David
11683 - STM32 F1-F4: STM32 BBSRAM fixed (and formatted) flags. From David
11685 - STM32 F7: STM32F7 BBSRAM fixed (and formatted) flags. From David
11687 - STM32 L4: Fix incorrect clock setup for LPTIM1. From ziggurat29.
11688 - STM32 F4/L4 RTC ALARM: were enabling interrupts too early in the
11689 power-up sequence, BEFORE the interrupt system was being
11694 - STM32 board.h: Fix STM32 timer input clock definitions. From David
11699 - Bug Fix in tiva_serial.c - UART5, UART6 and UART7 were not being
11705 - include/signal.h: Change type of SIG_ERR, SIG_IGN, ... to
11708 - crc16: fix error. From Paul Alexander Patience.
11709 - strtoul() and strtoull(): Fix errno settings required by function
11714 - Build system: This change fixes a build problem that only occurs
11715 when reconfiguring from Linux to Windows or vice-versa. It is a
11717 things happened: (1) The pre_config target was added to run before
11719 the pre_config target in order to set up the correct symbolic links
11722 menuconfig' to switch to Linux, the context target will execute
11726 native toolchain cannot follow the Cygwin- style symbolic links.
11727 The fix here is to also execute the clean_context AFTER executing
11728 menuconfig. A lot more happens now: It used to be that doing
11731 snappy as it used to be.
11732 - Need to build the drivers/ directory even it file descriptors are
11735 - Remove all inclusion of header files from the apps/include
11739 kernel thread, TZ/Olson database moved to libc/zoneinfo.
11743 - Make sure that APPNAME is defined in all Makefiles that generate
11748 - apps/builtins: exec_builtin was not using the provided open flags.
11754 - apps/nshilib: PS Command: When Priority Inheritance is enabled, the
11755 format of /proc/<PID>/status changes to show both the current
11761 - apps/netutils, uIP webserver: Fix a data declaration in a header
11766 - apps/canutils/libuavcan: Fix for recent change to STM32 timer
11771 - apps/examples/alarm: ioctl call was clobbering file descriptor.
11772 - apps/examples/can: Some variables were not declared in all required
11774 - apps/examples/media: media example was intended to take either a
11775 command line argument, or a compiled-in default value from config.
11776 However, the default was ignored, leading to confusing error
11779 NuttX-7.18 Release Notes
11780 ------------------------
11784 that release consists of two tarballs: nuttx-7.18.tar.gz and
11785 apps-7.18.tar.gz. These are available from:
11790 Both may be needed (see the top-level nuttx/README.txt file for build
11797 - Add standard adjtime() interface and basic timekeeping support.
11798 Normally used with an NTP client to keep system time in
11800 - Use the oneshot timer with optional entropy to measure CPU load if
11805 - Add Fujistu MB85RS256B ramtron support. From Beat K�ng.
11806 - SPI-based MTD driver for Macronix MX25L3233F or MX25L6433F. From
11811 - SH1106 0.96 OLED module support (SSD1306 compatible) + I2C fixes.
11816 - Add KXTJ9 Accelerometer driver from the Motorola Moto Z MDK.
11817 - Add MFRC522 RFID ISO14443 and Mifare transceiver driver. From Alan
11819 - Add driver for the LIS3MDL 3 axis magnetometer. From Alexander
11821 - Add driver for the MLX90393 3 axis magnetometer. From Alexander
11823 - Add driver for the LIS3DSH 3 axis accelerometer. From Alexander
11825 - Add driver for the Bosch BMG160 3 axis gyroscope. From Alexander
11827 - Add support for the Sensixs XEN1210 3D-board. This sensor is used
11828 on NANOSATC-BR2 a Brazillian CUBESAT project. From Alan Carvalho
11830 - Add a new ioctl command (set MAXPOS) for Tiva QEI. From Young.
11834 - I/O Expander: Remove hard-coded PCA9555 fields from ioexpander.h
11837 - I/O Expander Interface: Encode and extend I/O expander options to
11839 - PCA9555 Driver: Replace the signalling logic with a simple callback
11842 the lower-lower part of any driver that uses GPIOs (include the GPIO
11844 higher level application layer. And (2) in order to be compatible
11848 application is the appropriate place to be generating signal.
11849 - Add a skeleton I/O Expander driver (based on the PCA9555 driver).
11850 - Add PCF8574 I/O Expander driver.
11851 - GPIO driver: Add IOCTLs to get the pin type and to unregister a
11853 - Add a GPIO lower-half driver that can be used to register a GPIO
11855 - Add an SPI helper function that encapsulates and manages a sequence
11857 - Add an SPI character driver that will permit access to the SPI bus
11859 - Add oneshot timer lower half interface definition.
11860 - Add an upper-half, oneshot timer character driver.
11861 - Add Audio Tone Generator for NuttX. From Alan Carvalho de Assis.
11862 - Add USB host support for composite devices. This feature is not
11864 - drivers/ioexpander: Add an (untested) TCA64XX I/O Expander driver
11869 - Add a simulated I/O Expander driver.
11870 - Add simulator-based test support for apps/examples/gpio.
11871 - Add a configuration useful for testing Mini Basic.
11872 - Add a simulated oneshot lowerhalf driver.
11876 - SAM4CM: Add option to support oneshot timer without free-running
11881 - SAMA5D: Add option to support oneshot timer without free-running
11886 - SAMV71/SAME70: Add option to support oneshot timer without
11887 free-running timer. Add oneshot lower half driver.
11888 - Add support for SAMV7 DACC module. From Piotr Mienkowski.
11892 - Add support for I2C and RTC. From v01d (phreakuencies).
11896 - Add teensy 3.x I2C support. From v01d (phreakuencies).
11900 - Add IAR-style STM32F1xx vectors. Tested on STM32F103RB and
11905 - Add timekeeping support for the STM32 tickless mode. From Max
11907 - Add a oneshot, lower-half driver for STM32.
11908 - STM32 L4: Add oneshot lower half driver for STM32 L4.
11909 - STM32 L4: Add support for quadrature encoders on STM32L4. Sebastien
11914 - stm32f103-minimum: Add board support to MFRC522 driver. From Alan
11916 - Add oneshot board initialization to stm32f103-minimum. From Alan
11918 - stm32f103-minimum: Add board configuration to initialize Audio Tone
11920 - stm32bufferfly2: Add support for the Kamami stm32butterfly2
11922 - stm32f103-minimum: Add board config support to SPI LCD module
11923 JLX12864G-086. From Alan Carvalho de Assis.
11924 - stm32l476-mdk: Support basic booting and nsh on Motorola MDK. The
11927 - STM32 F4 Discovery: Add support for XEN1210 3D-board. From Alan
11929 - stm32f103-minimum: Add stm32_bringup support and userled example to
11931 - Add support for qencoders on various nucleo boards. From Sebastien
11933 - olimex-stm32-e407: Add some networking configurations. From Mateusz
11938 - Add tiva PWM lower-half driver implementation. From Young.
11939 - Tiva QEI: Add QEI lower-half driver for Tiva series chip. From
11944 - Separate XorShift128 PRNG from /dev/urandom and make it generally
11946 - Add POSIX type sig_atomic_t. From Sebastien Lorquet.
11947 - Add the difftime() function. The function depends on the toolchain-
11950 - Add support for remove(). From Sebastien Lorquet.
11951 - Add system() to stdlib.h. Actual implementation is in
11956 - Rename arch/sh to arch/renesas.
11957 - Remove contactless drivers from drivers/wireless to drivers
11959 - Move all modem-related IOCTL commands to a common file to assure
11964 - Add sethost.sh. This is a script that you can use to quickly
11965 change the host platform from Linux to Windows/Cygwin. Might save
11970 - Add logic to support an NSH-specific system command.
11971 - Add printf command to NSH, e.g., controlling /dev/userleds from
11977 - Port tee command from NetBSD.
11978 - Add a generic system command. Current implentation cannot use
11983 - Add C++ support for STM32L476-MDK.
11987 - Add a port of Mini Basic, version 1.0, written by Malcom McLean and
11992 - Add a simple test of the GPIO driver.
11993 - Add RFID_READUID sample application. From Alan Carvalho de Assis.
11994 - Add Oneshot timer example.
11995 - Add a simple test of the system command.
11997 Works-In-Progress:
12000 introduced in NuttX-7.15. Work has continued on this effort on
12003 least NuttX-7.19.
12011 - Explicitly initialize the group tg_exitsem with sem_init(). The
12013 all zero, but it is better to initialize the semaphore explicitly.
12014 - The TCB nchildren field should not be incremented when pthreads are
12016 - Move fields related to parent/child task relationship out of TCB
12019 - mq_send() was not setting the errno value on certain failures to
12021 - Define 'group' even if HAVE_GROUPID is not set. From Mateusz
12023 - Vector table should have dimension NR_IRQS, not NR_IRQS+1. From
12025 - pthreads: When a pthread is started, there is a small bit
12029 parent thread and the new pthread to be blocked at the priority of
12032 new pthread to at least the priority of the new pthread to at least
12035 drop to the correct priority (if necessary) before calling into the
12040 - FAT performance improvement. In large files, seeking to a
12043 time since we are going to seek to the same position. This fix
12044 short-circuits fat_seek() in all cases where we attempt to seek to
12046 - MTD: Fixed cloned typos in several FLASH drivers. From Aleksandr
12048 - mount: Corrects a bad assertion noted by Pierre-noel Bouteville.
12056 - Various serial drivers: Fix FIONWRITE and add FIONSPACE. All
12061 - Add missing prototype for btn_lower_initialize().
12062 - Make DAC sample structure packed. From Marc Recht�.
12066 - TCP: tcp_ipvX_bind() not actually using the port selected with
12067 port==0. Also removes duplicate call to pkt_input(). Issues noted
12069 - drivers/net: NET_TUN=y => NET_MULTIBUFFER=y. From Vladimir
12071 - slip driver: Fix calculations using MSEC_PER_TICK. If
12077 - SAM3/4 GPIO: Enable peripheral clock for GPIO port when GPIO is
12080 enabled. Therefore we need to enable the clock even when polling a
12082 - All SAM Ethernet Drivers: Add support so that the drivers can be
12084 - SAM3/4: Fix GPIO pull-up/down code. Enabling the pull-down resistor
12085 while the pull-up resistor is still enabled is not possible. In this
12087 Likewise, enabling the pull-up resistor while the pull-down resistor
12094 - All SAM Ethernet Drivers: Add support so that the drivers can be
12096 - SAM GPIO: Apply Wolfgang's change for SAM3/4 to SAMA5 and SAMV7.
12100 - Add missing oneshot max_delay method.
12101 - All SAM Ethernet Drivers: Add support so that the drivers can be
12103 - SAM GPIO: Apply Wolfgang's change for SAM3/4 to SAMA5 and SAMV7.
12107 - LPC43xx serial: Fix typos in LPC43 serial driver. Found by Vytautas
12109 - LPC43xx Serial: There are some small problems in LPC43xx RS485 mode
12111 (different from UART1), so, Kconfig needs to be adjusted. (2)
12113 enable pin output for UART0,2,3. (3) should be option to reverse DIR
12121 - EFM32 SPI drivers adopted incompatible conventions (See STM32 for
12126 - STM32, STM32 L4, and EFM32 SPI drivers adopted incompatible
12128 to negative when calling SPI_SETBITS which had the magical side-
12130 only a hokey way to pass control information but is supported by no
12138 SPI_HWFEATURES is called with HWFEAT_LSBFIRST to set the bit order.
12139 - Add missing SPI2 and SPI3 support for STM32F3F3. Add STM32F37XX DMA
12142 - STM32: Make stm32_pwr_enablebkp thread safe. From Max Neklyudov.
12143 - Fix bad pllmul values for STM32F1XX connectivity line. STM32F1XX
12146 - STM32F3 SPI: Fix the number of bit setting for the F3. That and
12149 - STM32 and STM32 L4: Enabling SPI DMA loses other bits in CR2.
12150 - STM32F3 SPI: Cannot write always 16-bit value to DR register
12152 - STM32F411 and STM32F446 map i2c2_sda_4 to different alternate
12154 - STM32 DMA Fix: Change stm32 adc dma callback to send channel
12156 - STM32 OTGFS device: Fix for lost first word from FIFO
12159 2) Acknowledge all pending int on entry to ISR that are Only rc_w1*
12162 …5) Only clear the NAK on the endpoint on the OTGFS_GRXSTSD_PKTSTS_SETUPDONE to not loose the first…
12166 …DOEPCTL0_CNAK bit is set in the OTGFS_GRXSTSD_PKTSTS_SETUPRECVD as opposed to the OTGFS_GRXSTSD_PK…
12172 - STM32 L4 OTGFS device: Apply stm32 fix to stm32l4. From Sebastien
12174 - STM32 F7: Remove duplicate call to pkt_input from Ethernet driver.
12176 - STM32 L4: Add support for USART3-USART5. For STM32L4 parts, the
12178 definitions to the configuration to allow enabling the higher
12180 - STM32 USB: Set USB address to avoid a failed assertion. From
12181 Pierre-noel Bouteville.
12182 - STM32 L4 and L7 USB: Pierre's assertion-avoidance change should
12183 also be applied to STM32 F7 and L4.
12184 - STM32, L4, and F7: Remove GPIO_ETH_RMII_TX_CLK. TX_CLK is not
12186 - STM32 Ethernet: Correct typo in conditional logic. From Neil
12188 - STM32 L4 USB Device: Fixed L4 USB Driver by avoiding SETUPDONE and
12190 - STM32 SPI: stm32_modifycr2 should be available on all platforms if
12192 - STM32 DMA2D: fix an error in up_dma2dcreatelayer where an invalid
12198 - Fix two bugs of tiva pwm lower-half driver implementation. From
12200 - Tiva Ethernet: Needs support for CONFIG_NET_MULTIBUFFER=y.
12204 - lib_dumpbuffer() now prints a large on-stack buffer first to avoid
12206 Pierre-noel Bouteville.
12207 - libc/math: This fixes the following libc/math issues: (1) asin[f l]()
12208 use Newton�s method to converge on a solution. But Newton�s method
12209 converges very slowly (> 500,000 iterations) for values of x close to
12210 1.0; and, in the case of asinl(), sometimes fails to converge (loops
12214 based on Chebyshev fitting to a good guess. The problem there�s a
12215 bug in the implementation that causes the functions to blow up with
12216 x near -3.0. This patch fixes that problem. It should be noted that
12218 less than 1.2E-07 and that�s fine for the float version erff(), but
12224 - strtod() was not returning endptr on error conditions.
12225 - libc/math: floor(), floorf(), and floorl(): Fix logic error. Was
12227 - isatty() should be prototyped in unstid.h, not termios.h. From
12229 - nxglib: Fix handling of near-horizontal lines of width 1 in
12231 width 1 lines such as (0, 0) - (100, 10) to have gaps in the
12236 - Top-Level Makefiles: Fix a chicken-and-egg problem. In the menuconfig
12237 target, the context dependency was executed before kconfig-mconf. That
12238 was necessary because the link at apps/platform/board needed to be set
12240 Kconfig files would not be included. But this introduces the chicken-
12241 and-egg problem in some configurations. In particular: (1) An NX
12242 graphics configuration is used that requires auto-generation of
12245 In this case, POSIX-style symbolic links are set up but the Windows
12247 'make menuconfig' is to change from Linux to Cygwin, but the target
12248 fails. During the context phase, NX runs CPP to generate source files
12254 to run all of the context setup; the compiler is never invoked; no
12256 - CXXFLAGS: Add -fcheck-new whenever -fno-exceptions is used. From
12261 - tools/refresh.sh: Recent complexities added to apps/ means that
12262 configuration needs the correct Make.defs file in place in order to
12264 - tools/kconfig2html.c: Update to handle absolute paths when sourcing
12266 - tools/mkfsdata.pl was still generating the old-style apps/include
12271 - Add DIRLINK and DIRUNLINK tool definitions to apps/Make.defs.
12275 - Fix FIFO_SIZE vs PIPE_SIZE.
12276 - Fix hex representation of IP address in Kconfig. Noted by Michal
12278 - nsh_syscmds.c: missing semicolon. From Mateusz Szafoni.
12279 - In system command, don't try to flush output streams if stdio
12284 - libuavcan: Under certain circumstances, DELIM is not be defined in
12286 - Add definition for APPNAME in apps/canutils/canlib. From Sebastien
12291 - Fix an error minmea. From Aleksandr Vyhovanec.
12295 - apps/examples/oneshot: If the requested delay is > max_delay, then
12298 NuttX-7.19 Release Notes
12299 ------------------------
12303 that release consists of two tarballs: nuttx-7.19.tar.gz and
12304 apps-7.19.tar.gz. These are available from:
12309 Both may be needed (see the top-level nuttx/README.txt file for build
12316 - sched/semaphore, sched/phread/, libc/semaphore, libc/pthread: Add
12317 pthread_mutexattr_get/set_protocol and non-standard
12318 sem_get/set_protocol. These may use to enable or disable priority
12320 - Spinlocks: Added capability to provide architecture-specific memory
12322 - SMP: Add spin_trylock(). Use this in conditions where other CPUs need
12323 to stopped but we cannot call enter_critical_section().
12324 - sched note: Extend OS instrumentation to include some SMP events.
12326 filter mask to log only notes from certain CPUs.
12327 - sched note: Permit spinlock and critical section notes in in-memory
12329 - sched note: Add additional note to see if/when CPU is started in SMP
12331 - sched note: Record ID enumeration now results on constant values; ID
12332 … values do not change with configuration. This makes writing post-processing software much easier.
12333 - boardctl: Add new boardctl() command, BOARDIOC_NX_START, to start the
12335 - pthreads: Add pthread_cleanup_push() and pthread_cleanup_pop().
12336 - pthreads: Added pthread_setcanceltype() and pthread_testcancel().
12337 - pthreads: Add support for cancellation points.
12338 - task_delete() now obeys all cancellation point semantics.
12339 - Add task_setcancelstate(), task_setcanceltype(), and
12340 task_testcancel(). These are non-standard interfaces analogous to the
12346 - boardctl: Add new boardctl() command, BOARDIOC_NX_START, to start the
12351 - Network drivers: Add option to use low-priority work queue to all
12353 - Network Drivers: Adapt all Ethernet (and other MAC) drivers to work
12354 as though CONFIG_NET_MULTIBUFFER were set. Remove all references to
12356 - Eliminate CONFIG_NO_NOINTS. There is no longer any support for
12361 - Vishay VEML6070: Add Vishay VEML6070 driver. From Alan Carvalho de
12364 * ARMv7-A
12366 - ARMv7-A/i.MX6: Add SCU register definitions. Add some controls to
12368 -- cache still incoherent on i.MX6.
12369 - ARMv7 GIC: SGIs are non-maskable but go through the same path as
12370 other, maskable interrupts. Added logic to serialize SGI processing
12375 - SAM3/4: Add SMP support for the dual-core SAM4CM. From Masayuki
12380 - Add support for the SAM5CMP-DB board. From Masayuki Ishikawa.
12384 - SAM4CMP-DB: Add support for the Atmel SAM4CMP-DB board running in an
12386 - SAM4CMP-DB: Add hooks to auto-mount the procfs file system on startup
12387 in board bring-up logic.
12391 - SAMv7: Register the watchdog device at the configured device path
12392 CONFIG_WATCHDOG_DEVPATH vs. hard-coded /dev/wdt. From Frank Benkert.
12396 - Calyps: Remove all Calypso board configurations. Remove Calypso
12401 - Misoc LM32: Adds basic support for the Misoc procoessors and the LM32
12403 - Misoc LM32: Add signal handling logic. From Ramtin Amin.
12404 - Misoc LM32: Add logic to flush/invalidate caches. From Ramtin Amin.
12408 - Misoc LM32 Serial: Add interrupting Misoc serial driver. From Ramtin
12410 - Misoc LM32 Timer: Add timer driver. From Ramtin Amin.
12411 - Misoc LM32: Add Misoc Ethernet driver From Ramtin Amin.
12415 - Misoc LM32 Qemu: Board support for testing Misoc LM32 with Qemu. From
12417 - Misoc LM32 Qemu: Integrate network support into configs/misoc/hello.
12419 - Misoc LM32 Qemu: Remove configs/misoc/include/generated directory. I
12422 these files a providing a symbolic link to this location! There is a
12425 architecture for a real-life build. From Ramtin Amin.
12429 - i.MX6: Add an untested SPI driver taken directly from the i.MX1 port.
12433 - Kinetis: Added missing headers. Kinetis broke out SPI to
12434 kinetis/kinetis_spi.h. Broke out DMA to use the modern Nuttx chip
12435 inclusion - still STUBS. Add Kinetis support for ARMV7-M Common
12442 - Kinetis: Add UID Unique ID. From Neil Hancock.
12446 - Freedom-K64F board: Add support for UID Unique ID. From Neil Hancock.
12450 - Olimex-LPC1766-STK: Enable procfs in NSH configuration. Automount
12455 - LPC43xx: Add timer driver: From Alan Carvalho de Assis.
12456 - LPC43xx GPDMA driver: The GPDMA block is basically the same as the
12463 - Bambino 200E: Add basic support to Micromint Bambino 200E board.
12466 - Bambino 200E: Add support for timer driver. From Alan Carvalho de
12471 - Remove RGMP and RGMP drivers.
12473 * RISC-V:
12475 - RISC-V: Add support for the RISC-V architecture and
12476 configs/nr5m100-nexys4 board. The board support on this is pretty
12477 thin, but it seems like maybe a good idea to get the base RISC-V stuff
12482 - STM32 F3: Implemention of the STM32 F37xx SDADC module. There are
12483 also changes to ADC, DAC modules. SDADC has only been tested in DMA
12486 - STM32 F3: Add PWM driver support for STMF37xx. The changes have been
12489 - STM32 F4: Support oversampling by 8 for the STM32 F4. From David
12491 - STM32 F4: Added Timers 2-5 and control of SAI and I2S PLLs. Added
12494 - STM32 F4: Expanded OTGFS support to stm32F469 and stm32f446. Added
12497 - STM32 F4: Allow dma in 1 bit mode in STM32F4xxx. From David Sidrane.
12498 - STM32 F7: Allow the config to override the clock edge setting. From
12500 - STM32 L4: Support Complementary PWM outputs on STM32L4. From
12502 - STM32 L4: Add implementation of dumpgpio for stm32l4, was required
12507 - STM32F103 Minimum: Add button support. From Alan Carvalho de Assis.
12508 - STM32F103 Minimum: Add support to PWM on STM32F103-Minimum board.
12510 - STM32F103 Minimum: Add RGB LED support on STM32F103 Minimum board.
12512 - STM32F103 Minimum: Add Vishay VEML6070 driver support to the
12513 STM32F103-Minimum board. From Alan Carvalho de Assis.
12514 - Nucleo-F303RE: Add STM32 F303RE hello configuration. From Marc
12516 - Nucleo-L476: Support PWM testing on board Nucleo L476. From
12518 - Nucleo L476: Add support for timers to Nucleo L476. From Sebastien
12520 - Hymini STM32v: Enable CONFIG_RTC in the hymini-stm32v/nsh2
12521 (kitchensink) config. From Maciej W�jcik.
12522 - Olimex STM32-p407: Add support for the Olimex STM32 P407 board.
12526 - Tiva PWM: Support PWM_PULSECOUNT feature for TI tiva. From Young.Mu.
12530 - Xtensa ESP32: Basic architectural support for Xtensa processors and
12532 - Xtensa ESP32: Add EXPERIMENTAL hooks to support lazy Xtensa
12533 co-processor state restore in the future.
12534 - Xtensa ESP32: Basic port is function in both single CPU and dual CPU
12537 logic, missing partition tables to support correct configuration from
12539 - Xtensa ESP32: Add stack checking logic.
12543 - ESP32 Core v2: Basic support for Expressif ESP32 Core v2 board
12546 - ESP32 Core v2: Add configuration to support linking NuttX for
12548 - ESP32 Core v2: Automatically mount /proc at start-up.
12549 - ESP32 Core v2: Add an OS test to verify the port.
12553 - libc/locale: Add a dummy setlocale() function to avoid drawing the
12555 - include/locale.h: Modify locale.h to add localeconv() and lconv
12557 - libc/locale: Allows c++ code to compile with or without
12562 - libc/wchar: Add wcslen, wmemchr, wmemcmp, wmemcpy wmemset, btowc,
12563 mbrtowc, mbtowc, wcscmp, wcscoll, and wmemmove to NuttX. From Alan
12565 - libc/wctype: Add functions wcrtomb, wcslcpy, wcsxfrm, wctob, wctomb,
12567 wcsftime. Add wctype.h; Move lib_wctype.c to libc/wctype. From Alan
12569 - include/ctype.h : Add isblank() macro to ctype.h. From Alan Carvalho
12571 - lic/stdlib: Add strtof() and strtold() as simply a copy of strtod
12573 - sscanf(): Use strtof() instead of strtod() if a short floating point
12575 32-bit FPU support with some additional code size.
12576 - sscanf(): Add scansets to the scanf function. Enabled
12578 - include/inttypes.h: Add architecture-specific inttypes.h. From Paul
12580 - C Library: Allow option to enable IP address conversions even when
12585 - The Smoothie project needs to compile C++ inside config/boardname/src/
12586 to use with High Priority Interruption, then I modified the board
12587 configs Makefile to support it. It works fine for the first time
12588 compilation, but if we execute "touch config/boardname/src/Pin.cxx"
12595 - tools/: Add tools/showsize.sh.
12599 - NSH: dd command will show statistics. From Masayuki Ishikawa.
12603 - apps/system/sched_note: Extend to include additions to instumentation
12605 - apps/system/sched_note: Add support for spinlock notes.
12606 - apps/system/sched_note: Add support for new scheduler instrumentation.
12610 - ESP32 Core v2: Add platform support for the ESP32 core v2 board.
12611 - Olimex STM32-p407: Add platform support for the Olimex STM32 P407.
12615 - graphics/traveler/tcledit and libwld: Add an X11 Tcl/Tk tool that can
12616 be used to edit Traveler world files.
12617 - Graphics: Remove all NX server taks. Instead, call boardctl() to the
12622 - examples/buttons: Add a new buttons example that uses the button
12625 - examples/cctype: Add an example to verify cctype functions.
12626 - Remove RGMP example.
12627 - examples/ostest: Extend the pthread cancellation test to exercise
12630 - examples/ostest: enhance pthread cancellation test some.
12632 Works-In-Progress:
12635 introduced in NuttX-7.15. Work has continued on this effort on
12638 least NuttX-7.20.
12646 - sched/semaphore: Within the OS, when a thread obtains a semaphore
12655 The fix was to have sem_post() call sem_addholder() just before
12658 - Many files: Make sure that priority inheritance is not enabled for
12661 - sched/semaphore: sem_trywait() no longer modifies the errno value
12662 UNLESS an error occurs. This allows these functions to be used
12664 - sched/clock: Correct clock initialization. The correct range for the
12665 month is 0-11 but is entered as 1-12 in the .config file. Add ranges
12666 to START_YEAR, MONTH, and DAY in sched/Kconfig.
12667 - sched/clock: Correct calculation for the case of Tickless mode with a
12668 32-bit timer. In that case, the calculation was returning millisecond
12671 - Work Queue: When queuing new LP work, don't signal any threads if
12673 - Work Queue: Signal sent from work_signal() may interrupt the low
12677 does not make any sense to send signal if it is already running and
12679 - Fix DEBUGASSERT() in group_signal.c. From Masayuki Ishikawa.
12680 - Eliminate bad boardctl() commands: Remove all references to
12681 BOARDIOC_PWMSETUP and board_pwm_setup(). Remove all references to
12685 - pthreads: Fix an error in pthread_mutex_destroy(). An error could
12688 - task_restart: Make sure new task starts with pre-emption disabled and
12690 - Enter/leave Critical Sections. Major redeign to
12691 enter/leave_critical_section logic to deal with the case where
12693 rather complex spinlocks must be used to maintain the critical section
12695 - SMP Critical Sections: Fixes for the SMP case: (1) Change order for
12699 - SMP wdogs: Wdog timers use a tasking interface that to manipulate
12701 to manage wdog expirations. In the single CPU case, this is fine.
12706 differently: Locks are required to protect code. this change adds
12707 locking (via enter_critical section) to wdog expiration logic for the
12709 - SMP vfork(): Fix a race condition in the SMP case. Existing logic
12714 - SMP: This change adds a new internal interfaces and fixes a problem
12718 CPU to modify that OS data stuctures associated with the CPU. When
12720 The three fixes are to handle cases in the SMP configuration where one
12721 CPU does need to make modifications to TCB and data structures on a
12725 sched_cpu_pause(tcb) to pause the CPU on which the task is running,
12726 (2) perform the necessary operations, then (3) call up_cpu_resume() to
12728 - SMP: Add logic to avoid a deadlock condition when CPU1 is hung waiting
12731 - SMP: Enforce this rule: Tasks which are normally restored when
12734 still have pre-emption disabled, i.e., g_cpu_schedlock is locked. In
12740 - AT24XX EEPROM MTD driver: Added EEPROM timeout. Fromo Aleksandr
12742 - fs/procfs: Fix procfs status for SMP case.
12746 - Fonts: Correct some default font IDs. From Pierre-Noel Bouteville.
12750 - usbhost/enumerate: Fix possible buffer overwrite. From Janne Rosberg.
12751 - usbhost/composite: Fix compile; missing semicolons. From Jann Rosberg.
12752 - syslog: Fixes required for file syslog output. From Max Kriegleder.
12753 - SPI configuration: Fix Kconfig warning. This change moves the
12761 - drivers/timer: Remove the timer driver TIOC_SETHANDLER IOCTL call.
12763 is non-standard, non-portable, and cannot be supported. Instead, add
12764 timer driver hooks to support signal notification of timer
12766 - All timer lower half drivers. Port Sebastien's changes to all other
12768 - USB MSC Device: Fix length of mode6 sense reply packet. From
12770 - USB Composite Host: Fix end offset in usbhost_copyinterface(). From
12772 - USB CDC/ACM Host: Add CDC_SUBCLASS_ACM and CDC_PROTO_ATM to
12774 - SSD1306: Fix errors in SPI mode configuration. From Gong Darcy.
12775 - CDC/ACM Device Class: uart_ops_s portion of cdcacm will not be
12780 - drivers/net/tun.c: Fix bug in TUN interface driver. From Max Nekludov.
12782 * ARMv7-A:
12784 - ARMv7-A SMP: Add SMP logic to signal handling.
12786 * ARMv7-M:
12788 - ARMv7-M: Fix double allocation of MPU region in mmu.h.
12790 * ARMv7-R:
12792 - ARMv7-R: Fix compilation error. This change fixes compilation errors
12793 on MPU support for ARMv7-R. From Heesub Shin.
12794 - ARMv7-R: fix invalid drbar handling. In ARMv7-R, [31:5] bits of DRBAR
12798 - ARMv7-R: Remove the redundant update on SCTLR. mpu_control() is
12801 - ARMv7-R: Add new Kconfig entries for D/I-cache. Unlike in ARMv7-A/M,
12803 in ARMv7-R. This change adds those missing Kconfig entries. Actual
12806 - ARMv7-R: Add cache handling functions. This change adds functions for
12807 enabling and disabling d/i-caches which were missing for ARMv7-R.
12809 - ARMv7-R: Fix typo in mpu support. s/ARMV7M/ARMV7R/g. From Heesub Shin.
12810 - ARMv7-R: Fix CPSR corruption after exception handling. A sporadic
12811 hang with consequent crash was observed when booting. It seemed to be
12814 r1. GCC translates this to: msr spsr_fc, r1. As a result, not all
12817 invalid value at power-on-reset. As it is not initialized at boot, the
12820 - ARMv7-R: Fix to restore the Thumb flag in CPSR. Thumb flag in CPSR is
12826 - SAM3/4 UDP: Add delay between setting and clearing the endpoint RESET
12827 bit in sam_ep_resume(). We need to add a delay between setting and
12830 endpoint is not being reset, the Data Toggle (DTGLE) bit will not to
12831 be cleared which will cause the next transaction to fail if DTGLE is
12832 1. If that happens the host will time-out and reset the bus. Adding
12835 - SAM3/4: Remove unused 'halted' flag from UDP driver. From Wolfgang
12837 - SAM3/4: Remove 'stalled' flag from the UDP driver. This flag is not
12843 - SAM4S Xplained Pro: Configuration uses old, improper timer interface.
12849 - SAMv7 USBDEVHS: A problem occurred with the SAMV7 USBDEVHS driver if
12852 few seconds it is not possible to send data over this IN endpoint
12857 resetting the register SAM_USBHS_DEVDMACTRL to a known state.
12859 - SAMV7 MCAN: Prevent Interrupt-Flooding of ACKE when not connected to
12860 CAN-BUS. An Acknowledge-Error will occur every time no other CAN Node
12862 not connected to the can-bus. The CAN-Standard declares, that the Chip
12863 has to retry a given message as long as it is not sent successfully
12865 to resend the message an Acknowledge-Error-Interrupt is generated. At
12868 application). To prevent this Interrupt-Flooding we disable the ACKE
12871 - SAMV7 MCAN: Make delete_filter functions more robust. From Frank
12876 - SAMA5 PWM: Driver does not build when executing from SDRAM before
12884 - Misoc LM32: Corrects a bug that never occured in qemu on simulation or
12890 - i.MX6 interrupt handling: Additional logic needed to handle nested
12892 SGI interrupts are non-maskable.
12896 - LPC43xx serial: Fix a typo in ioctl TIOCSRS485 ioctl. From Vytautas
12898 - LPC43xx serial: Restore RS485 mode on serial port open (if RS485 is
12900 - LPC43xx SD/MMC: Correct some definitions on SMMC control register in
12902 - LPC43xx SD card: Correct pin configuration options needed for SD card
12907 - EFM32: Fix a compilation error. From Pierre-noel Bouteville.
12911 - STM32 CHxN channels are always outputs. From Sebastien Lorquet.
12912 - STM32 DAC: Fix shift value whenever there are is a DAC2 and, hence,
12913 up to three interfaces. From Marc Recht�.
12914 - STM32 F1: Add TIM8 to STM32F103V pinmap. From Maciej W�jcik.
12915 - STM32 F1: Fix for F1 RTC Clock, tested on F103. From Maciej W�jcik.
12916 - STM32 F3: STM32F303xB and STM32F303xC chips have 4 ADCs. From Paul
12918 - STM32 F4: A new implementation of the STM32 F4 I2C bottom half. The
12922 - STM32 F4 OTGHS Host: If STM32F446 increase number of channels to
12924 - STM32 F4: I think, that Size is (highest address+1 - Base address).
12927 - STM32 F4: Fix ADC compilation error when DMA isn't enabled. From Paul
12929 - STM32 F4: STM32F427 was rebooting. Over reached family. From David
12931 - STM32 F4: Added STM32F469 RAM size and deliberated STM32F446 size.
12933 - STM32 F4: Typo in stm32f76xxxx_pinmap.h edited online with
12935 - STM32 F7: stm32_i2c.c Dejavu. Fixes a bug previously found in the
12937 - STM32 F7: OTGDEV fixed typo. From David Sidrane.
12938 - STM32 F7: Fix to SPI-Master driver. Without this the chip select
12940 - STM32 F7: STM32F7 SD/MMC driver depends on CONFIG_SDIO_DMA which is
12941 only defined in stm32/Kconfig. Changed to CONFIG_STM32F7_SDMMC_DMA
12943 - STM32 F7: Fix some STM32F7 copy paste errors. From David Sidrane.
12944 - STM32 L4: Complementary PWM outputs on STM32L4" (1) too many
12947 - STM32 L4: Fix I2C devices RCC registers. From Sebastien Lorquet.
12948 - STM32 L4: Enable and renaming for 32l4 UARTs 4 and 5. From Sebastien
12950 - STM32 L4: Change the way to configure quadrature encoder prescalers.
12952 - STM32 L4: Correct USART1/2 definitions. Use default mbed UART4
12957 - STM32F103 Minimum: Fix Timers 2 to 7 clock frequencies. From Alan
12959 - Nucleo-F303RE: Remove duplicate setting from board.h. From Marc
12961 - Nucleo F303RE: Various fixes to get the ADC configuration building
12963 - Nucleo L476RG: Add better selection of timer.
12967 - DK-TM4C129x: Typo fix. From Wolfgang Rei�negger.
12971 - ESP32 core v2: Flush the UART TX buffer in the esp32 serial shutdown
12973 over to user code, so some of this output is not currently seen when
12976 - Xtensa ESP32: Corrects a problem with dispatching to signal
12977 handlers: Cannot vector directly to the signal handling function as
12978 in other ABIs under the Xtensa Window ABI. In that case, we need to
12984 - ESP32 core v2: Changes the openocd config file's default flash
12985 voltage from 1.8V to 3.3V. This is not necessary right now, but may
12986 save some hard-to-debug moments down the track (3.3V-only flash
12987 running at 1.8V often half-works and does weird things...). From
12992 - libc/stdio: Fixes sscanf() %sn where strlen(data) < n. From David
12994 - libc/stdio: Include wchar.h in lib_libvsprintf.c to fix compilation
12996 - include/sys/time.h: timersub macro modified per recommendations of
12998 - include/ctype.h and cxx/cctype: Implement ctype.h functions as inline
13000 - include/: Fix a number of header files with mismatched 'extern C {'
13002 - libc/unisted: Change brings strtol() and related functions more
13003 conformant with POSIX. Corner cases like strtol(-2147483648, NULL,
13004 10) now pass clang -fsanitize=integer without warnings. From Juha
13006 - libc/unistd: sleep() was returning remaining nanoseconds (kind of),
13008 - termios.h: Fix CRTSCTS define to include input and output flow. From
13013 - configs/*/defconfig: The buttons example was changed to archbuttons.
13016 - config/*/defconfgs: More fallout from name change of
13017 apps/examples/buttons to archbuttons.
13018 - configs: All QE encoder files. Last change made timer hard-coded to
13020 - configs: Remove all traces of the no-longer existent ARCHBUTTONS
13023 - minnsh Configurations: Remove minnsh configurations and support
13025 to see just how small you could get NuttX, but otherwise it was not
13033 - Make.defs: Using wrong link script if native window tool used with
13038 - ESP32 Core v2 Platform: Fix some naming that prevented building the
13043 - NSH Library: nsh_getdirpath(), use snprint instead of sprintf to
13048 - Remove std_readline(). This called up_getc() and up_putc() directly,
13053 - FTPD: Fixed bug that didn't free ftpd ressources on exit. From Pascal
13055 - NTP client: Fix missing left parenthesis. From Pierre-Noel Bouteville.
13056 - cJSON: Import patch to fix:cJSON_PrintUnformatted() behaves unexpected
13057 if an empty array shall be printed to text. from Jerome Lang
13058 2012-04-19. From Pierre-Noel Bouteville.
13059 - esp8266 update cosmetic and many bug fix. From Pierre-Noel Bouteville.
13060 - FTPD: Fix bug un ftpd file or socket may be not closed. From
13061 Pierre-Noel Bouteville.
13065 - Modbus Master is missing many files and doesn't compile at all. More
13072 - The examples/qencoder app was trying to init the encoder by a direct
13073 call into the board, cheating in a local header to declare the
13075 - apps/examples/timer: Should detach signal handler before exiting.
13076 - examples/qencode: The examples/qencoder app was trying to init the
13077 encoder by a direct call into the board, cheating in a local header to
13080 - apps/examples/archbuttons: Removed becaue it violates OS interface
13082 - examples/adc, pwm, can: Remove all usage of BOARDIOC_ADCTEST_SETUP,
13086 - examples/ostest: Add some delays to the pthread cancellation test.
13089 NuttX-7.20 Release Notes
13090 ------------------------
13094 that release consists of two tarballs: nuttx-7.20.tar.gz and
13095 apps-7.20.tar.gz. These are available from:
13100 Both may be needed (see the top-level nuttx/README.txt file for build
13107 - Kernel Modules: Module initializer may now return a symbol table.
13108 - Modules: Extend the module interface so that we can access symbols
13110 - Shared Libraries: In the FLAT build mode, kernel modules may be
13111 used to provide minimal shared library functionality.
13112 - Modules/Shared Libraries: Add support for dependencies between
13114 - Module Library: Add build a configuration logic for a shared module
13116 - Shared Libraries: Implement module based shared libraries for the
13118 - Interrupt handling: irq_attach() now includes an argument of type
13120 then provided to the interrupt handler when the interrupt occurs.
13123 - Adapt many drivers to utilize the IRQ argument feature.
13124 - All functions that used to return an xcpt_t old handler value, now
13126 with the recent changes to the interrupt argument passing. Some of
13130 - IRQ subsystem: Add support for smaller interrupt tables as
13137 - Pseudo File System: Add support for soft links in the top-level
13139 - Soft links: Add an implementation of readlink().
13140 - Add fstat() support. Implement fstat() method in binfs, romfs,
13142 - fstat: Add fstat() support to FAT. From Alan Carvalho de Assis.
13146 - Fonts: Add support for Tom Thumb small mono-space font. From Alan
13148 - Graphics: Separated of font cache from graphics/nxterm. Now in
13154 - Ethernet drivers: Add framework for serialization in the case where
13155 multiple low-priority work queues are used.
13159 - Add capabilities() method to SDIO interface. Remove
13163 - Removed dmasupported() method from the SDIO interface. That is now
13165 - drivers/sensors: Add driver for the ST L3GD20 3 axis gyro. From
13170 - SAM3/4: Add support for ATSAM4S4C. From Wolfgang Rei�negger.
13174 - Sabre 6quad: Enable examples/smp test in i.MX6 SMP/NSH
13179 - Kinetis: Added support for CHIP_MK60FN1M0VLQ12 chip. From Maciej
13181 - Kinetis: Add support for K64/K66 RTC lower half driver. From Neil
13183 - Kinetis: Extensive modification of MCG support based feature
13185 - Kinetis: Add support for K66 family. From David Sidrane.
13186 - Kinetis: Created a kinetis SIM versioning scheme pulled in by
13188 - Created a kinetis PMC versioning scheme pulled in by Kinetis
13190 - Kinetis: Extend clock configuration logic. Refactor
13195 - Kinetis Ethernet: Kinetis Support RMII clock source select. This
13197 to be made via Kconfig. From David Sidrane. Freedom-K66F uses
13199 - Kinetis Serial: Added configurable 1|2 stop bits.
13200 HAVE_SERIAL_CONSOLE -> HAVE_UART_CONSOLE to be consistent with
13202 - Kinetis LPserial: Add LPUART serial driver and Clock
13203 configuartaion to freedom-k66f board. From David Sidrane.
13204 - Kinetis USB device: Refactor clocking in kinetis_usbdev. From
13209 - Add support for NXP Freedom-k66f development board. From David
13211 - Kinetis Freedom K66F: Add Ethernet support. From David Sidrane.
13212 - Add twr-k64f120m config. From Marc Recht�.
13216 - Bamboo-200E: Add netnsh configuration. From Alan Carvalho de Assis.
13217 - Add usbnsh config to Bambino 200E board. From Alan Carvalho de
13222 - STM32 F7: Allow board to configure HSE clock in bypass-mode. This
13223 is needed to enable HSE with Nucleo-F746ZG board. From Jussi
13225 - STM32 F7: stm32_allocateheap: allow use DTCM memory for heap.
13226 STM32F7 has up to 128KiB of DTCM memory that is currently left
13227 unused. This change adds DTCM to main heap if
13229 - Add basic support for the STM32F334. From Mateusz Szafoni.
13230 - STM32F33XX DAC, OPAMP, COMP, ADC, HRTIM headers. From Mateusz
13235 - STM32 F7 SDMMC: Add support for single bit operation on SDMMC2.
13236 - STM32 L4: Port STM32L4 SAI driver from MDK.
13237 - STM32 L4: Bring power management logic from Motrola MDK into NuttX.
13238 - STM32 L4: Bring LPTIM driver in from the Motorola MDK.
13239 - STM32 L4 COMP: Port from Motorola MDK.
13243 - STM32F429i Discovery: Add support for NxWM on STM32F429i-Disco
13245 - STM32F103 Minimum: Add support for nRF24 on STM32F103-Minimum
13247 - Olimex STM32 P407: Add a NSH protected build configuration; Enable
13249 - Olimex STM32 P407: Add support for on-board microSD slot.
13250 - STM32F429i Discovery: Add support for the L3GD20 driver. From
13252 - STM32F103 Minimum: Add support to QEncoder on STM32F103 Minimum
13254 - Olimex STM32 P407: Add external SRAM support.
13255 - Add basic support for the Nucleo F334R8 board. From Mateusz
13257 - STM32F103 Minimum: Add SDCard support over SPI on STM32F103-Minimum
13259 - STM32F103 Minimum: Add support to USB Device on STM32F103-Minimum
13264 - compiler.h: packed_struct replaced by begin_packed_struct and
13267 - Math library: Leverage optimized ARMv8-M functions from BSD license
13269 - Shared libraries: Add a non-standard dllfnc.h function to set the
13271 - C Library: Add a support for setvbuf(). This is a collaborative
13273 - C Library: Add setbuf() which is a trivial wrapper around setvbuf().
13274 - C library: Add swab().
13275 - C library: Add strtoimax and strtoumax.
13276 - C library: Add ffs(), rindex(), an index(). Add strings.h. Move
13277 strcasecmp, strncasecmp, bzero, bcmp, and bcopy to where they
13281 - C library: Add fstatfs().
13282 - Update cwchar. Add cwctype.
13286 - Add configuration support for builds with Ubuntu under Windows 10.
13290 - tools/noteinfo.c: A hack tool that I use to analyze some sched_note
13291 output. Needs a home and may be useful to others.
13292 - tools/mkconfig.c: Add logic to keep all of the buffering options in
13297 - NSH: Add support for the 'ln' command.
13298 - NSH ls command: if node is a symobolic link, use readlink() to get
13300 - NSH: Add readlink command.
13304 - apps/examples/nxtext: Make line spacing configurable.
13305 - apps/system/zmodem/host/nuttx/compiler.h synchronized with
13307 - apps/examples/sotest: Add a test for shared libraries.
13308 - apps/examples/ostest: Add a test of setvbuf().
13309 - apps/examples/stat: Add a simple test for stat(), fstat(),
13312 Works-In-Progress:
13315 introduced in NuttX-7.15. Work has continued on this effort on
13318 least NuttX-7.21.
13326 - SMP: There were certain conditions that we must avoid by preventing
13328 But this logic was incomplete; there was no logic to prevent other
13331 sched_addreadytorun to avoid starting new tasks within the critical
13333 the IRQ lock must be permitted to do whatever it needs to do.
13334 - SMP: Make checks for CPU lock set more robust. There are certain
13336 where things need to be done a little differently.
13337 - sched_cpulocked: Avoid use of spinlock. That has been reported to
13338 cause a deadlock (2016-12-28).
13339 - SMP: Fix a gap where we may try to make modifications to the task
13341 concurrent access to the tasks lists and many subtle problems.
13345 - SMP: Fix an error in critical section logic when performing a
13349 - SMP Signals: Fix some SMP signal delivery logic. Was not handling
13350 some critical sections correctly and was missing logic to signal
13352 - SMP: Fix timer related issues: Round robin and sporadic
13357 - sched_note: Fix spinlock instrumentation. From Masayuki Ishikawa.
13358 - In all implementations of _exit(), use enter_critical_section() vs.
13360 - sigtimedwait: When timer expires, up_unblock_task() is called.
13364 to manage spinlocks correctly.
13365 - Fix a compile error: in sched_cpuload.c:Line136, the variables ts
13369 - CPU load: Correct computation of the nominal period to use when the
13371 - Cancellation points: Fix some backward logic in conditional
13373 - Remove an unused variable when calling sigwaitinfo() and
13378 - procfs: Correct to snprintf-related errors in fs_procfsproc.c.
13380 - Add logic to VFS rename: If target of rename exists and is a
13384 - Fix open() a block device with
13386 - File System: Don't build block driver proxy if PSEUDOFS_OPERATIONS
13388 - sendfile(): Fix error introduced with commit
13393 - NxWM configurations. If using a 7-bit character set, then the
13396 - NX server: Correct message queue names. Should not be at /dev,
13397 but rather relative to /var/mqueue.
13401 - MMCSD_SDIO: Only wait for card ejected if card detection is
13403 - Typos withim mtd/ with Macronix MX25L. In
13406 - USBMSC: Always set LUN readonly flag. From Wolfgang Rei�negger.
13407 - drivers/lcd: ssd1306_configspi() must have global scope.
13408 - MMC/SD SDIO: Some drivers need to start DMA before sending CMD24
13410 - drivers/tone.c: Handle configuration with multiple PWM channels.
13413 - drivers/tone.c: 50% duty needs to be expressed a a fixed precision
13415 - drivers/spi/Kconfig: There is too much SPI in the configuration
13417 - option to enable Memory Card debug output was hidden with SD cards
13419 - usbhost_cdcacm: fix tx outbuffer overflow and remove now invalid
13424 - Networking: Fixed some issues that prevented IPv6 from working with
13425 IPv4 enabled. From Pascal Speck.
13426 - Networking: fixed a nullptr-dereference on iob_clone. From Pascal
13428 - Ethernet: Need two work structures (minimum) in all Ethernet
13432 * ARMv7-R:
13434 - I found an issue inside the cp15_coherent_dcache function: The
13436 configurationa. In non-SMP configuration this instruction could
13441 - SAM3/4: GPIO bit numbering typo fixes. From Wolfgang Rei�negger.
13445 - Add missing sched_note_*() calls in sam4cm SMP functions.
13449 - Kinetis: Fixed wrong MCG VDIV calculation on new NXP K60. From
13451 - Kinetis: Need to set HAVE_UART_DEVICE when UART4 is selected. From
13453 - Kinetis MCG: Wrong FRDIV set in MCG_C1. From Maciej Skrzypek.
13457 - Kinetis Serial: Fixed compile error when UART5 is selected. From
13459 - Kinetis SDHC - Enable clock after selected. From David Sidrane.
13460 - Kinetis: Correct some SPI and I2C configuration issues. From
13462 - Kinetis Ethernet: Add #define for number of loops for auto
13463 negotiation to complete. From Marc Recht�.
13464 - Kinetis Werial: Fixed up_rxint - did not disable the RX
13470 - LPC43 pinset definitions: Add more 1 bit to pinset to reach
13471 SFSCLK0-SFSCLK3. Remove PINCONFIG_DIGITAL. From Alan Carvalho de
13476 - LPC43 serial: Correct conditional logic that selects /dev/ttySN.
13481 - i.MX6: Fix clearing GPT status register. From Masayuki Ishikawa.
13485 - STM32, STM32L4 Oneshot: Fix logic so that it can support multiple
13487 - STM32 F7: Added missing ARCH_HAVE_RESET for F7. From David Sidrane.
13488 - STM32: Add missing STM32_BKP_BASE. From David Sidrane.
13489 - STM32 and STM32F7: Fixes the BKP reference counter issue. From
13494 - Fix for SAMv7 SPI: DLYBS value was calculated, but never written to
13495 any registers. This led to incorrect timings on the bus. From
13497 - STM32 QEncoder: Fix QEncoder driver, based on STM32L4 driver. From
13499 - STM32 QEncoder: Enable clocking to the timer on QE setup; disable
13501 - STM32 Ethernet: Need two work structures so that pending poll work
13503 ported to all all other effected Ethernet drivers.
13504 - STM32 OTGHS host: stm32_in_transfer() fails and returns NAK if a
13508 packet. From Janne Rosberg. Adapted Janne Rosberg's patch to
13509 STM32 OTGHS host to OTGFS host, and to similar USB host
13514 - STM32F4 Discovery: Fix issues with QEncoder support. From Alan
13519 - Add debug assertion in libdtoa to catch attempts to use floating
13522 to allocate memory. From Pierre-noel Bouteville.
13523 - libc: Fix ARMv7-A/R memcpy assembly.
13524 - Fix return value if x is NaN. From Aleksandr Vyhovanec.
13528 - NSH: Eliminate a warning when all memory inspection commands are disabled.
13532 - apps/graphics/traveler/tools: Fix linkage issue. The -lm should
13533 come after -o binname. From Alan Carvalho de Assis.
13537 - The CONFIG_NETUTILS_HTTPD_PATH constant is used by httpd_mmap.c and
13543 - Configurations that enable OSTEST must not disable signals.
13544 - apps/examples/ostest: Was ignoring
13546 - In apps/examples/mtdpart/mtdpart_main.c where
13550 NuttX-7.21 Release Notes
13551 ------------------------
13555 that release consists of two tarballs: nuttx-7.21.tar.gz and
13556 apps-7.21.tar.gz. These are available from:
13561 Both may be needed (see the top-level nuttx/README.txt file for build
13568 - pthread rwlocks: Add an implementation for read/write locks
13572 - pthread robust mutexes: Implement robust mutex support:
13575 pthread_mutex_consistent() to recover from this situation. Keep
13579 mutex is awakened. There is a configuration option to (a) support
13583 - pthread cancellation points: Add logic to disable cancellation
13588 - clock: Add clock_resynchronize and use subseconds RTC. Add
13590 CLOCK_MONOTONIC to match RTC after resume from low-power state. Add
13592 CONFIG_ARCH_HAVE_RTC_SUBSECONDS to allow initializing (and
13595 - clock: Add new type ssystime_t for relative 64-bit ticks, change
13596 ticks<->time conversion functions to use ssystime_t. From Jussi
13598 - clock: Add testing for 32-bit overflow of 64-bit system timer. From
13603 - drivers/mtd/w25.c: Erase sector only if it is not in erased state.
13608 - drivers/lcd: Extend st7565 driver to include support for the
13610 - drivers/lcd: Add driver for Nokia 5110 (Philips PCD8544). From Alan
13615 - Extensive modifications to support wireless network (see below).
13616 - TUN driver: Implement TAP (OSI layer 2) mode. Enable by setting the
13619 - Add user-space networking stack API (usrsock). User-space
13620 networking stack API allows user-space daemon to provide TCP/IP
13621 stack implementation for NuttX network. Main use for this is to
13622 allow use and seamless integration of HW-provided TCP/IP stacks to
13623 NuttX. For example, user-space daemon can translate /dev/usrsock
13624 API requests to HW TCP/IP API requests while rest of the user-space
13627 - net/: Network driver now retains Ethernet MAC address in a union so
13633 - BCM43362: Support for Broadcom's BCM43362 WiFi chip was contributed
13640 - IEEE 802.11 networking tools and support.
13641 - IEEE 802.15.4 MAC support. This is an effort that was started some
13645 the Mikroe Clicker2-STM32 board along with a PC-based IEEE 802.15.4
13648 - Microchip MRF24J40: As mentioned above, this IEEE 802.15.4 radio
13650 - IEEE 802.15.4 Network Driver: A driver that interfaces the NuttX
13653 - IEEE 802.15.4 Network Loopback Driver: A simple IEEE 802.15.4 MAC
13656 - 6LoWPAN: The Contiki 6LoWPAN stack has been ported so that works
13662 - Add option to enable wireless debug output.
13666 - Add entropy pool and strong random number generator. Entropy pool
13667 gathers environmental noise from device drivers, user-space, etc.,
13672 randomness without file-descriptor usage (thus avoiding file-
13676 - XBox One controller: Adds USB host driver support for the XBox One
13680 - drivers/analog: Add basic COMP driver. From Mateusz Szafoni.
13681 - drivers/analog: Add driver for the LTC1767L ADC. From Martin
13683 - drivers/analog: Add basic OPAMP driver. From Mateusz Szafoni.
13684 - drivers/sensors: Add driver for ST HTS221 humidity sensor. From
13686 - drivers/sensors: Add driver for ST LPS25H pressure sensor. From
13688 - drivers/sensors: Add driver for ST LIS2DH accelerometer. From Timo
13690 - drivers/usbmisc: Add driver for Fairchild FUSB301 USB type-C
13692 - RTC: Add interface for check if RTC time has been set. New
13693 interface allows checking if RTC time has been set. This allows to
13694 application to detect if RTC has valid time (after reset) or should
13695 application attempt to get real time by other means (for example, by
13697 - Buttons: Change return value of board_buttons() and the type of
13698 btn_buttonset_t to uint32_t so that more than 8 buttons can be
13700 - drivers/syslog: Use monotonic clock for timestamp when available.
13702 - SPI: Add an instance argument to the SPIDEV definitions. Thus,
13707 - IOBs: Move from net/iob to a better location in mm/iob where they
13710 - syslog: Add option to buffer SYSLOG output to avoid interleaving.
13711 Uses new shareable IOBs. Additional logic to assure that the the
13714 - drivers/can: Move CAN subsystem to its own directory and put device
13716 - drivers/can: Add Microchip MCP2515 CAN Bus controller driver. From
13718 - drivers/audio: Add cs43l22 audio driver. From Taras Drozdovsky.
13719 - drivers/input: Add Cypress MBR3108 CapSense touch button driver.
13724 - configs/sim/sixlowpan: Configuration for testing the 6LoWPAN with
13729 - arch/arm/src/xmc4: Initial, partial support for Infineon XMC4xxx.
13733 - XMC4500 Relax: Add basic board support infrastructure of Infineon
13740 - pic32mx7mmb: Add support for the Pinquino toolchain.
13741 - pic32mx7mmb: Add support for PROCFS file system.
13745 - Kinetis: Allow board to add pullups on SDHC lines. From David
13747 - Kinetis: Use optional BOARD_OSC_CR and BOARD_OSC_DIV in clock
13752 - Kinetis: Add Timer PWM Module (TPM) to K66 chip. From David
13754 - Kinetis: Added HW flow control and termios. From David Sidrane.
13755 - Kinetis: Add ARCH_HAVE_I2CRESET. From David Sidrane.
13759 - Add support for LPC4337FET256. From Andreas Bihlmaier.
13763 - Change STM32 tickless to use only one timer. From Konstantin
13765 - STM32 F7: Add support for LSE RTC and enable RTC subseconds. From
13767 - STM32 L1: stm32l15xx_rcc: Add support for using MSI as system
13769 - STM32 L1: stm32l15xxx_rcc: configure medium performance voltage
13770 range and zero wait-state when allowed by SYSCLK setting. Zero
13771 wait-state for flash can be configured when: (1) Range 1 and
13774 can be configured when SYSCLK is up to 16 Mhz and PLLVCO up to
13776 - STM32 F0: Add basic support for STM32F0. From Alan Carvalho de
13778 - STM32 F0: Add basic support for STM32F07x family.
13779 - STM32 L1: stm32l15xx_rcc: Allow board to configure HSE clock in
13780 bypass-mode. Allows using MCO output from ST-link chip (on Nucleo
13782 - STM32 L1: Add support for STM32L152CC, STM32L152RC and STM32L152VC.
13784 - STM32 F0: Add support for HSI48.
13785 - STM32 L4: Add support for the STM32L496XX family. From Juha
13787 - STM32 L4: modularize Kconfig to support different product
13788 lines/families. This is modeled after STM32F7. Idea is to declare
13791 - STM32 L4: Separate SYSCFG into product line specific files for
13793 - STM32 L4: Add support for many new MCUs from the STM32L4X3XX
13795 - STM32 L4: Add dbgmcu header files. From Juha Niskanen.
13796 - STM32 F410: Add support for STM32F410. STM32F410 is a version of
13798 Goavec-Merou.
13802 - SDIO: Extensions to support the SDIO interface to the BCM43362 from
13804 - STM32 F2: Add USB OTG HS support for stm32f20xxx cores. From Simon
13806 - STM32 F2, F4, and F7: Add BOARD_DISABLE_USBOTG_HSULPI flag. From
13808 - STM32 F33: Move DMA logic to a separate files + add ADC support.
13810 - STM32 F3: Add COMP support. From Mateusz Szafoni.
13811 - STM32 F33: Support for COMP character driver. From Mateusz Szafoni.
13812 - STM32 F4: Implement DMA support for the STM32F4 I2C. From Rajan Gill.
13813 - STM32 F7: Add stm32 RNG support. This is copied from stm32l4.
13815 - STM32 L1: Add STM32L162VE to chip.h. From Juha Niskanen.
13816 - STM32 F4: Add I2C3 SDA pin mapping for STM32F411. From no1wudi.
13817 - STM32 L1: stm32_flash: Add EEPROM writing for STM32L15XX. From
13819 - STM32 F7: Serial: Add interface to get uart_dev_t by USART number,
13821 - STM32 F4: Provide TIM5 definition for STM32F429. From Matias v01d.
13822 - STM32 F0: Add an untested port of the F1 USB device to the STM32F0.
13823 - STM32 F0: Add support for the STM32F09X family. From Juha
13825 - STM32 F0: Initial cut at I2C driver. Still a work in progress.
13827 - STM32 F33: Add OPAMP support. From Mateusz Szafoni.
13828 - STM32 L4: stm32l4_i2c: Add I2C4 code. From Juha Niskanen.
13829 - STM32 L4: Add GPIO_PORTI definition. From Juha Niskanen.
13830 - STM32 F7 Serial: Allow configuring Rx DMA buffer size. From Jussi
13832 - STM32 L4: Firewall for stm32l4x3xx. Not tested for any product
13835 - STM32 TIM: Add method to get timer width. Freerun timer: Use timer
13836 width to get the correct clock rollover point.
13837 - STM32 L4: Add internal flash write support. From Juha Niskanen.
13838 - STM32 L4: Port stm32l4_serial_get_uart function from STM32F7. From
13840 - STM32 Ethernet: Add support for KSZ8081 PHY interrupts. From
13842 - STM32 F4: Add I2S driver. From Taras Drozdovsky.
13843 - STM32 L4: Add IWDG peripheral. This is the same as for STM32
13845 been started, as this seems to work on L4. From Juha Niskanen.
13846 - STM32 F7: Add SPI DMA support. From Jussi Kivilinna.
13850 - Support for the Particle Photon board was contributed by Simon
13851 Piriou. The Photon board is based on a STM32F205G MCU with and on-
13856 - Clicker2-STM32: Support for the Mikroelektronika Clicker 2 for
13858 MRF24J40 Click board is the platform used to deveop the IEEE
13861 knsh, usbnsh, and mrf24j40-radio.
13862 - Nucleo_F334R8: Add ADC example. From Mateusz Szafoni.
13863 - Nucleo-F334R8: Add COMP support. From Mateusz Szafoni.
13864 - Nucleo-F334R8: Use new COMP driver. From Mateusz Szafoni.
13865 - Adds USB host support to stm32f411-disco board. From Brian Webb.
13866 - Add stm32f0discovery board support. From Alan Carvalho de Assis.
13867 - Nucleo-F072RB: Add board configuration.
13868 - Nucleo-F334R8: Add OPAMP support. From Mateusz Szafoni.
13869 - Nucleo-F072RB: Add support for the I2C driver used by I2C tools.
13870 - Nucleo-L496ZG: Add nucleo-l496zg board files. From Juha Niskanen.
13871 - Nucleo-F091RC: Add nucleo-f091rc board files. From Juha Niskanen.
13872 - Nucleo-L432KC: Add nucleo-l432kc board files. From Sebastien
13874 - Nucleo-L452RE: Add nucleo-l452re board files. From Juha Niskanen.
13875 - stm32f103-miniumum: Add board support to use the Nokia 5110
13880 - C library: Add strerror_r().
13881 - C Library: Add wcstoull(), swprintf(), wcstod(), wcstof(), wcstol(),
13883 wcsnrtombs() (just returning success). Add mbtowc() and wctomb() to
13885 - C Library: Add ffsl(), ffsll(), fls(), flsl(), flsll() and use
13888 - fixedmath: Add square root and b32_t conversion operators. From
13890 - locale.h: Add a bogus definition of locale_t.
13891 - C library: Versions mbrlen and mbsrtowcs taken and adapted from
13897 - Include C++ library in 'make export'. From Alan Carvalho de Assis.
13898 - configs: Remove all setenv.sh and setenv.bat files. Remove all
13899 references to setenv.sh and setenv.bat from all config README files.
13900 - Kconfig/deconfigs: Add CONFIG_ARCH_TOOLCHAIN_GNU to indicate that
13901 the toolchain is based on GNU gcc/as/ld. This is in addition to the
13902 CPU-specific versions of the same definition.
13903 - Move prototype for up_cxxinitialize() from nuttx/include/nuttx/arch.h
13904 to apps/include/platform/cxxinitialize.h.
13908 - Add initialconfig.c so that perhaps in the future we will be able to
13909 use this to generate a new configuration from scratch (rather than
13910 having to derive new configurations from existing configurations).
13915 - Added support for set [{+|-}{e|x|xe|ex}] [<name> <value>]. Set the
13919 script, the settings are returned to the default settings when it
13922 Use 'set -e' to enable and 'set +e' to disable (ignore) the exit
13923 condition on commands. The default is -e. Errors cause script to
13924 exit. Use 'set -x' to enable and 'set +x' to disable (silence)
13928 - Print expanded variables if -x. From David Sidrane.
13929 - ifconfig command: Extend ifconfig to support 6LoWPAN. Adapt to
13931 - Network initialization: If IEEE802.11 selected use wlan0 instead of
13933 - Network initialization: NSH now has configuration options to select
13935 passes this to wpa_driver_wext_associate() so that it will set the
13937 - Network initialization: Add a new option CONFIG_NSH_NETLOCAL that
13943 - examples/xbc_text: Adds a test program for the XBox One controller
13945 - examples/ostest: Add a test of robust mutexes.
13946 - examples/ostest: Add tests for pthread_rwlock. Adding tests to be
13947 used to verify the pthread_rwlock lock works. From Mark Schulte.
13948 - examples/ostest: Additional test for rwlock and one for cancel
13950 - examples/usrsocktest: Add application for USRSOCK testing. From
13952 - examples/nettest: Adapt for use in testing 6LoWPAN.
13953 - examples/nettest: If doing loopback, but not using the official
13956 - examples/udpblaster: Several fixes to work with 6LoWPAN.
13957 - examples/udpblaster: Add logic to bind the local UDP socket to a
13958 well-known address.
13959 - examples/configdata: Add stacksize and priority. From Juha Niskanen.
13963 - netutils/netlib: Add IEEE 802.11 wireless IOCTL wrappers.
13964 - netutils/netlib: Add a helper function to convert a string to a
13966 - netlib and NSH: Add logic to get/set the IEEE802.15.4 PAN ID.
13967 - netutils/dhcpc: Make the network device name a configuration
13968 option. Was hardcoded to eth0 but may, instead, need to be wlan0.
13969 - netutils/dhcpc: Remove hard-coded interface device. Now passed as
13970 a parameter to dhcpc_open(). From Sebastien Lorquet.
13974 - wireless/wapi: Port of Wapi wireless services. The original
13979 - wireless/wapi: Create command line Wapi application based on
13981 - wireless/wapi: wpa_driver_wext_associate() now accepts a
13982 configuration parameter that can be used to specify the wireless
13984 - wireless/wapi: Add basic wapi_event_stream_extract implementation.
13986 - wireless/ieee802154: Add iwpan and i8sak tools. iwpan is similar
13987 in concept to wapi. From Anthony Merlino (i8sak was originally
13989 - wireless/ieee802154/libmac: IEEE 802.15.4 MAC library.
13990 - wireless/wext: Add drivers_wext from the WPA supplicant; Integrate
13995 - apps/system/dhcpc: Add a command to renew or establish a lease on an
13996 IPv4 address.
13997 - apps/system/ntpc: Add a command to start or stop the NTPC daemon.
13998 - apps/system/ramtest: Make stacksize and priority conigurable.
14000 * Platform-Specific Support (apps/platform)
14002 - apps/platform: Create gnu/ subdirectory that contains the one and
14012 - Priority inheritance: When CONFIG_SEM_PREALLOCHOLDERS==0, there is
14013 only a single, hard-allocated holder structure. This is problem
14014 because in sem_wait() the holder is released, but needs to remain in
14016 to sem_restorebaseprio() must be one of the last things the
14017 sem_wait() does because it can cause the task to be suspended. If in
14018 sem_wait(), a new task gets the semaphore count then it will fail to
14020 inheritance. This fix is to add two hard-allocated holders in the
14022 - Priority inheritance: sem_holder sem_findholder missing
14025 - Partial Fix priority inheritance CONFIG_SEM_PREALLOCHOLDERS=0. From
14027 - Priority inheritance: sem_boostholderprio prevent overrun of
14028 pend_reprios. The second case rtcb->sched_priority <=
14029 htcb->sched_priority did not check if there is sufficient space in
14031 - lp_worker: Guard from pend_reprios overflow. From David Sidrane.
14032 - Priority inheritance: Fixes improper restoration of base_priority in
14033 the case of CONFIG_SEM_PREALLOCHOLDERS=0. The call to
14035 sem_foreachholder(sem, sem_restoreholderprioB, stcb); call prior to
14037 the started task. Leaving both slots filled thus failing to perform
14039 releasing the running task slot prior to reprioritization that can
14040 lead to the context switch. To faclitate this, the interface to
14041 sem_restorebaseprio needed to take the tcb from the holder prior to
14044 the additional thunking on the foreach to get from holer to
14045 holder->tcb. An alternate approach could be to leve the interface
14047 copy the sem's holder to it, free it as is done in this pr and
14051 - Priority inheritance: Fixes improper restoration of base_priority.
14053 - sem_holder: Indexing error. From David Sidrane.
14055 if (sem->holder[0].htcb != NULL || sem->holder[**1**].htcb != NULL)
14056 - realloc(): When realloc() has to fall back to calling malloc(), size
14057 including overhead was being provided to malloc(), causing a slightly
14059 - scheduler: Fix tg_flags check with GROUP_FLAG_NOCLDWAIT. From Masayuki
14061 - scheduler: Fix CHILD_FLAG_EXITED in include/nuttx/sched.h. From
14063 - binfmt/elf: Fix offset value when calling elf_read() in
14065 - binfmt/elf: Fix offset value when calling elf_read() in
14067 - There can be a failure in IOB allocation to some asynchronous
14071 IOBs, it calls sem_wait().� The value of semcount is now -1. (2)
14072 Task A frees the IOB.� iob_free() adds the IOB to the free list and
14073 calls sem_post() this makes Task B ready to run and sets semcount to
14075 When Task B wakes up it would increment the sem_count back to the
14084 sem_post() post cause the semcount and the list content to become out
14088 side, when awakened from the semaphore wait, it will expect to find
14092 - binfmt: Fix .dtor memory allocation. From Masayuki Ishikawa.
14096 - SmartFS: If whence is SEEK_END, the file offset shall be set to the
14098 - mtd/progmem: Fix incorrect target address calculation.
14102 Byte-oriented read/write interfaces of mtd device accept the target
14104 - procfs: Fix wrong member IDs are displayed when 'cat
14106 - procfs: Fix incorrect uptime with CONFIG_SYSTEM_TIME64. From
14108 - vfs/poll: round timeout up to next full tick. Calling poll() with
14115 interval will be rounded up to the next supported value." From Jussi
14117 - mtd/config: erase block between block read and write. From Juha
14119 - mtd: Build RAMTRON and AT45DB drivers only if selected. From Juha
14121 - mtd/config: Fix byte read interface test. From Juha Niskanen.
14122 - mtd: Fix some unallocated and NULL pointer issues. rwb->wrflush and
14123 rwb->wrmaxblocks in rwbuffer could get unallocated values from
14134 These problems are caused by CONFIG variable differences between the
14137 - net procfs: Fix buffer corruption and refactor netdev_statistics.c.
14139 - FAT: Fix 'Missing unlock' in fs_fat32.c. From Masayuki Ishikawa.
14140 - VFS fdopen: Add missing file stream flags clearing. Clear file
14141 stream structure regardless of config options. Structure clearing is
14144 - mtd/smart: Fix use of uninitialized variable. From Jussi Kivilinna.
14145 - mtd/w25.c: Enable short delay after sector/chip erase. From Jussi
14147 - mtd/config: Add some error checks for I/O errors. From Juha
14152 - net procfs: Some long lines were being generated that cause buffer-
14157 - Fixed wrong assert on udp dgram send. From Pascal Speck.
14158 - TCP/IPv6: Fix a compile issue when IPv6, but not IPv4 is enabled.
14159 - net/socket/accept: Fix building with CONFIG_NET_LOCAL_STREAM. From
14161 - Argument of network device IOCTL should be unsigned long, just as
14163 - net/socket: Fix cloning of local and raw sockets. From Jussi
14165 - TCP: Wait for 3-Way Handshare before accept() returns. From Simon
14167 - TCP: Send RST if applicaiton 'unlistens()' before we complete the
14169 - TCP: An RST received during the 3-way handshake requires a little
14170 more clean-up.
14171 - IPv6: Fix net_ipv6_pref2mask(). From Masayuki Ishikawa.
14172 - network IOCTL commands: The only place in net/netdev/netdev_ioctl.c
14176 - TCP: Fix tcp_findlistner() in dual stack mode. From Masayuki
14181 - Fix as5048b by adding missing frequency parameter. From Andreas
14183 - multiple fixes in nrf24l01 driver: (1) signal POLLIN if there is
14184 already data in the FIFO, (2) send ETIMEDOUT to userspace after 2
14188 - input/mxt: Prevent overriding i2c transfer return value.
14190 i2creset return value, that lead to OK status although actual
14192 - drivers/audio/wm8904: WM8904 has same problem as that fixed by Juha
14194 - UART 16550: Missing left parenthesis in function prototype. This is
14196 - USBMSC: Fix a wrong lun number issue. From Masayuki Ishikawa.
14197 - drivers/i2c: Fix compile issues if CONFIG_DISABLE_PSEUDOFS_OPERATIONS
14199 - drivers/serial: I discovered a problem in the file
14206 - drivers: Fix some bad NULL checks. From Juha Niskanen.
14207 - drivers: Rename newly introduced up_i2creset to I2C_RESET. From
14209 - drivers/bch: BCH character driver bch_ioctl() always returns -ENOTTY
14212 - Replace sprintf() with snprintf() in pipe.c. From Nobutaka Toyoshima.
14213 - drivers/bch: Fix 'Missing Unlock' in bchdev_driver.c. From Masayuki
14215 - button_upper: Fix interrupt enabling for poll-events. From Jussi
14217 - drivers/{sensors,usbmisc}: Fix uninitialized I2C frequency. From
14222 - Set EABI stack alignment for all ARM architectures (remove OABI
14224 - Remove redundant interrupt stack coloring and OABI code. From David
14226 - Fix off-by-one interrupt stack allocation in 8-byte aligned
14229 * ARMv6-M:
14231 - CONFIG_DEBUG_HARDFAULT should be available for Cortex-M0 too.
14235 - SAM3/4: Fixed configurations for TWI master. Obviously an
14240 - SAMV7: Watchdog: Fix Forbidden Window Value. According the Datasheet
14242 to disable this we have to set the WDD Value greater than or equal to
14243 the WDV Value. This seems to be a bug in the datasheet. It looks
14244 like we have to set it to a greater value than the WDV to really
14247 Feature resets the System if WDD equals to WDV. This Changeset
14248 disables the Forbidden Window by setting the WDD Value to the Maximum
14250 - SAMV7 EMAC: Add conditional logic to account the fact that the
14255 - Kinetis: Fixed GPIO _PIN_OUTPUT_LOWDRIVE swapped with
14257 - Ensure interrupts are back on BEFORE running code dependant on
14259 - Kinetis k66, k64, k60, k40, k20: Pin mux configure all I2C signals as
14260 Open Drain. The output structure of the GPIO for I2C needs to be
14262 slave contending with the push-pull during the ACK. From David
14264 - Kinetis K66: Fixed TMP2_CH1 definition. From David Sidrane.
14265 - Kinetis K66: Define ALT1 to match ref manual. From David Sidrane.
14266 - Kinetis K66: GPIO and pin mux cleanup. From David Sidrane.
14267 - Kinetis ADC: Various corrections and updates. From David Sidrane.
14271 - Add missing PINCONF_INBUFFER in several places of
14273 - Fix logic in preprocessor checks and correct arguments to
14278 - Fix logic error in lpc43_adc. From Andreas Bihlmaier.
14279 - Use correct macro for irqid (fortunately both point to
14281 - Actually write modified value to register. From Andreas Bihlmaier.
14282 - Increase number of supported PWM channels from 4 to 6. From Andreas
14287 - EFM32 I2C: Fix timeout calculation. From Masayuki Ishikawa.
14291 - As discovered by dcabecinhas. This fix assume the 8 byte alignment
14294 https://github.com/PX4/Firmware/issues/6613#issuecomment-285869778.
14296 - STM32 F7: In stm32_allocateheap.c There are 5 not 4 configurations.
14301 - STM32, STM32 F7, STM32 L4: OTG host drivers: Do not do data toggle
14303 - Save elapsed time before handling I2C in stm32_i2c_sem_waitstop().
14304 This change follows the same logic as in previous fix to
14313 - save elapsed time before reading registers. This way a context
14316 - STM32, STM32 F7, and STM32 L4: Clone Freddie Chopin's I2C change to
14318 - STM32: OTG host implementations of stm32_in_transfer() must obey the
14320 - STM32: Fix erase sector number for microcontrolers with more than 11
14322 being set but never unsed, so trying to erase a sector from the first
14325 - STM32: Make up_progmem thread safe. Writing to a flash sector while
14327 add a semaphore and syncronize access to Flash registers. But for
14328 the semaphore to work it needs to be initialized so each board needs
14329 call stm32_flash_initialize() on initialization, so to avoid runtime
14331 initialized, after all boards starts to call stm32_flash_initialize()
14333 - STM32: Add workaround for flash data cache corruption on
14334 read-while-write. This is a known hardware issue on some STM32 see
14337 - STM32 Flash fixes. From Jos� Roberto de Souza.
14338 - STM32 Flash: Missing unlock on F1 HSI off path. From David Sidrane.
14339 - STM32 F4 I2C: I needed to use DS3231,�I remember�that�in past it
14345 stm32_i2c_sendstart after data reading helps to make DS3231 working.
14347 - STM32 F7 Serial: Serial fix for dropped data: (1) Revert the
14350 for details. And (2) Most all CR1-CR3 settings can not be configured
14353 - STM32 L1: Fix IWDG and WWDG debug mode stop for STM32L15XX. From
14355 - STM32 F7: Fix UART7 and UART8 IFLOWCONTROL options. From Jussi
14357 - STM32 F7: Add warning for RXDMA + IFLOWCONTROL combination.
14359 expect. Since RXDMA uses circular DMA-buffer, DMA will always keep
14363 flow-control. Data loss can be demonstrated by doing long up_mdelay
14364 inside IRQ critical section and feeding data to RXDMA+IFLOWCONTROL
14366 - STM32 F7 Serial: Do not stop processing input in SW flow-control
14368 - STM32 L4 DMA: Correct bad channel definition. From Sebastien Lorquet.
14369 - STM32 F7: Warn if no DMA2 configured when using ADC with DMA. Also
14370 correct ADC channel numbers that DMA callback passes to upper half
14372 - STM32 F7 ADC: Do not override ADCPRE_DIV when measuring
14374 - STM32 L4: Don't think these chips have DPFPU, DTCM or ITCM. From
14376 - STM32 F7 Flash: macro naming errors, there is no FLASH_CONFIG_F for
14378 - STM32 L4: stm32l4x6xx_pinmap: Update I2C4 and DCMI pins. From Juha
14380 - STM32 L4: stm32l4_i2c: change wrong macro to CONFIG_I2C_POLLED. From
14382 - Fix STM32F7 I2C interrupt handler. From Jussi Kivilinna.
14383 - STM32: Serial Allow configuring Rx DMA buffer size. From David
14385 - STM32 CAN: I had the problem that the transmit FIFO size (= actual
14389 can_xmit thinks it has sent the packet to the hardware, but actually
14394 stm32can_send to determine if the mailbox can be used for sending,
14395 and thus can_xmit forwards the packet to stm32can_send.
14398 the request completed bit is set - stm32can_txinterrupt has to
14400 stm32can_txinterrupt - I removed the if condition, because the CAN
14401 controller retries to send the packet until it succeeds. Also if the
14402 condition would not evaluate to true, can_txdone would not be called
14404 - STM32 Serial: Fix freezing serial port. Serial interrupt
14407 functions. Trivially triggered with two or more threads write to
14408 regular syslog stream and to emergency stream. In this case, freeze
14409 happens because of mismatch of priv->ie (TXEIE == 0) and actually
14410 enabled interrupts in USART registers (TXEIE == 1), which leads to
14413 - STM32 I2C: Make private symbols static. From Juha Niskanen.
14414 - STM32 L4 GPIO: Put back EXTI line source selection. From Juha
14416 - STM32 L4 RTC: Store RTC MAGIC to backup reg, not to address zero.
14421 - Disable serial console on stm32f103-minimum usbnsh example project
14422 config. Devices enumerate after this change. From Bob Ryan.
14423 - Nucleo-144: Default for choice in Kconfig was not one of the
14425 - Nucleo-F4X1RE User LEDS: Issue #51 reports compilation problems with
14430 - Tiva I2C: Correct an error in conditional compilation.
14431 - Tiva SSI: Resolves issue 52 'Copy-Paste error in
14436 - C Library vsnprintf(): Fix precision for string formatting. Fixes
14437 use of format precision to truncate input string. From Jussi
14439 - C Library vsnprintf(): If size is zero, then vsnprintf() should
14442 - C Library netdb: in dns_query_callback, ret != -EADDRNOTAVAIL
14445 - C Library netdb: Fix time info in lib_dnscache.c. From Masayuki
14447 - C Library netdb: Fix bugs in lib_gethostbynamer.c. This fix sets
14450 - C Library Defect Workaround: replace '%6.6u' format with an
14455 - Fix mksyscall host binary name. From Alan Carvalho de Assis.
14459 - Fix some calls to task_create(): argv[0] is the first parameter, not
14461 - Bitbucket Issue 5: I found an unexpected behavior in apps/
14465 path outside of the source tree instead path to sub-directory in
14469 - apps/: Make more globals static to avoid name clashes. From Juha
14474 - NSH library: In nsh_argexand(), if CONFIG_NSH_ARGCAT is defined but
14478 - NSH library: Fix building when CONFIG_NET_USRSOCK enabled with other
14479 link-layers. From Jussi Kivilinna.
14480 - NSH library: Fix some warnings about integer/pointer casts of
14481 different sizes (probably only effects 64-bit simulation).
14482 - NSH library: Fix open flags in nsh_codeccmd.c. From Masayuki
14484 - I need to look at the registers that are at or around 0xe000ef90.
14487 for those two commands are set with calls to strtol() rather than
14488 strtoul(). Changing the two pointer-setting instances to strtoul()
14489 fixes the problem, at least for my architecture/config. From Ian
14491 - NSH library: Fix a resource leak in cmd_hexdump(). From Nobutaka
14496 - apps/examples/hidkbd: Remove call to arch_usbhost_initialize().
14499 board bring-up logic as with any other devices and should not involve
14501 - apps/examples/usbterm: Removed because it is not very useful and
14502 because it can be configured to use an illegal call into the OS.
14503 - examples/mm: Fix Makefile. Built-in was not being registered.
14504 - examples/hidkbd: Add some missing configuration settings.
14505 - examples/random: Avoid stack overflows. From Juha Niskanen.
14506 - examples/nettest: Fix an error in pre-processor expression.
14507 - examples/mtdpart: Prevent part array overflow. mtdpart examples
14508 create partions and allocate from 1 index not a 0 index to part[]
14511 - examples/can: Fix can example app to print data when
14516 - Not a clean fix, but at least makes DHCP working with
14518 - Ensure netlib will not be broken when setip will not bring the
14523 - Fix libcanard github download link to get it compiling correctly.
14525 - Fix to use the new canardInit() function. From Alan Carvalho de
14530 - system/dhcpc: Add missing argument of fprintf.
14534 - The dedicated windows tool at tools/mkkconfig.bat uses $APPSDIR,
14538 NuttX-7.22 Release Notes
14539 ------------------------
14543 that release consists of two tarballs: nuttx-7.22.tar.gz and
14544 apps-7.22.tar.gz. These are available from:
14549 Both may be needed (see the top-level nuttx/README.txt file for build
14556 - pthreads: Move functions from sched/pthreads to libc/pthreads. These
14562 - Add power-related debug output.
14566 - RAMTRON: Add support for splitting block writes in chunks. Some
14567 Re-RAMs like MB85AS4MT have a write buffer size limitation. From
14569 - MTD: Add driver for Macronix QuadSPI flash memory. From Simon Piriou.
14573 - SSD1306 LCD Driver: (1) Separate lcd_dev_s setup to separate object.
14574 g_oleddev takes 1 KiB because framebuffer and was allocated to .data
14576 setup out, so that g_oleddev goes to .bss and avoid wasting ROM. (2)
14583 adds support for board based power control to SSD1306 driver. (4) Add
14584 DD-12864WO-4A/SSD1309 support to SSD1306 driver. From Jussi Kivilinna.
14588 - Sockets: Support listening sockets in the getsockname() function.
14590 - IP Forwading: At the IP level, network may be configured to forward
14593 - IP forwarding: Add optional support to forward broadcast and
14595 - ICMPv6: Add 6LoWPAN and IP forwarding support.
14596 - ICMPv6: Support source link-layer address option in RA. From
14598 - TUN Driver: Add definitions that will permit TUN-only networking.
14599 - Socket I/F: Created a socket interface used to provide socket support.
14600 Each address family has an interface that describes how to perform
14603 - Remove CONFIG_NET_MULTILINK. This increases code size by a little,
14605 - Network procfs: Add support for routing tables at proc/net/route.
14606 - Network procfs: Add support for network procfs statistics for the
14608 - Network Driver Backlog: Remove driver based backlog support. This
14610 supported RX backlog is now via common read-ahead buffering.
14614 - IEEE 802.15.4 MAC / MRF24J60 Driver: Extensive updates for
14615 association/beacon-enabled networks. From Anthony Merlino.
14616 - IEEE 802.15.4 MAC / MRF24J60 Driver: Hook in setdevmode from newly
14618 - IEEE 802.15.4 MAC: Supports get request for coordinator address. From
14620 - IEEE 802.15.4 MAC: Notify radio layer of changes in devmode. From
14622 - IEEE 802.15.4: Add special attribute that can be used to perform a
14624 - IEEE 802.15.4 loopback driver: Better simulation addressing: short
14626 - IEEE 802.15.4 Network Driver: Add logic to setup the network mask,
14627 update the MAC-based IPv6 addressing when the network is brought up.
14628 The idea is that addressing changes are supposed to occur only while
14631 - PktRadio: Add an infrastructure to support networking on generic
14632 (non-IEEE 802.15.4) packet radios.
14633 - PktRadio Loopback Driver: Add a PktRadio loopback network driver to
14635 - Spirit Network Driver: The Spirit1 radio (SPSGRF-915) is the first
14637 with 8-bit addressing. We need to use the STack packets in order to
14639 - Network procfs: Fix so that PktRadio address are shown correctly.
14640 - Networking: Add support for some packet radio IOCTL commands.
14641 - 6LoWPAN: Added handling for TCP and ICMPv6 packets.
14642 - 6LoWPAN: Add configurable support for 6LoWPAN star topology. With
14644 forward all traffic to the coordinator. The coordinator is assumed to
14646 - 6LoWPAN: The original, Contiki-based design used only a single buffer
14651 outgoing packets. The design was extended to support multiple
14655 - 6LoWPAN PktRadio: Now radio agnostic. All IEEE 802.15.4 dependencies
14658 the representation of radio MAC meta-data, (2) changes to handle
14659 variable-length radio addresses, (3) removal of all explicit IEEE
14661 interface to return 'capabilities' of the drvier.
14662 - ICMPv6: Update so that ICMPv6 can be used with 6LoWPAN.
14663 - IPv6 Neighbor: Update table format to support IEEE 802.15.4 MAC
14665 - PF_IEEE802154 Address Family: Add support for the PF_IEEE802154
14666 address family socket type. This socket is similar to the PF_PACKET,
14669 MAC-based radios. This address family permits simple access to IEEE
14670 802.15.4 IOCTLs and frame-level network transfers.
14674 - Dynamically configurable USB composite devices: We developed a huge
14675 Changeset over a year ago to make USB Composite configuration
14676 dynamical and be able to instantiate the CDC/ACM multiple times inside
14677 …this device. We use this feature to switch between one in typical USB MSC + CDC/ACM configuration…
14678 I've changed the interface for some USB-Functions to receive also the
14680 - Franks' change remained on a branch until all issues were resolved.
14682 - power: battery_charger: Add ioctl for charging input current. From
14684 - SMPS driver: Add generic upper-half driver for SMPS. From Mateusz
14686 - LED Driver: Add support for inverted LEDS. From Jeff.
14687 - LED Driver: Add lightness correction for RGB LED driver. From Jeff.
14688 - LTC4151 Driver: Add driver for LTC4151 current and voltage monitor.
14690 - Serial TERMIOS: tcdrain() implementation based on a new term ioctl.
14692 - Serial TERMIOS: Add support for TCFLUSH. From Sebastien Lorquet.
14693 - syslog: Add option to use the CLOCK_MONOTONIC for time stamping. From
14695 - HC-SR04 Driver: Add support to HC-SR04 distance sensor. From Alan
14697 - COMP Driver: Add poll support. From Pekka Ervasti.
14698 - BQ2429X Driver: Add driver for TI BQ2429X battery charger. From Juha
14700 - ADC Driver: Add poll support. From Juha Niskanen.
14701 - BCH Driver: Add poll support. From Jussi Kivilinna.
14702 - RTC Driver: Extend the RTC framework with an alarm read ioctl
14709 - sim/ipforward: Add an IP forwarding configuration using TUN devices
14711 - Console: Add non blocking read to devconsole driver. From Simon
14713 - Networking: Poll for TX frames to speed up driver. From Simon Piriou.
14714 - pf_ieee802154: Add configuration for testing PF_IEEE802154 address
14716 - ARM Simulator: Adds necessary functionality to build Simulator under
14722 - SAML21 I2C driver. Developed for and contributed with permissin from
14724 - SAMD/L21 USB Driver: Add a USB driver. Developed for Filament Inc.
14729 - SAMV71-XULT: Add support for the MRF24J40 radio and create a
14730 mrf24j40-starhub configuration.
14731 - SAME70-Xplained: Add MRF24J40 support.
14735 - Kinetis USB Improvements: usbdev clean up ensuring proper use of HW.
14739 - Kinetis SPI driver: From David Sidrane.
14740 - Kinetis: I2C driver added I2C3, reference counting and reset.
14741 Refactored the driver to support reference counting and reset added
14743 - Kinetis RTC: Implementation of the alarm read function.
14747 - configs/teensy-3.x USB: Define USBOTG-FS Read from FLASH access in
14748 board config. Allow the board config to define the USBOTG-FS to have
14749 Read access to FLASH. From David Sidrane.
14750 - configs/teensy-3.x: Removed call to khci_usbattach. The call is not
14752 - freedom-k66f: Use SPI driver. Initalize SPI1 on connector J6. No
14757 - LPC43xx: Modify up_allocate_(k)heap() to support PROTECTED mode. From
14762 - configs/Bambino: Add protected mode configuration to Bambino board.
14767 - LC823450: Initial support for ON Semiconductor LC823450. From Masayuki
14769 - LC823450: eMMC/SD and USB support for LC823450. From Masayuki Ishikawa.
14773 - LC823450-XGEVK: LC823450-XGEVK board support. From Masayuki
14775 - LC823450-XGEVK: Add eMMC/SD and USB support. From Masayuki Ishikawa.
14779 - STM32 L4: Add support for the STM32L475 family.
14780 - STM32 L4 RCC: Enable ADC clock source. From Juha Niskanen.
14781 - STM32: Allow clock frequencies > 168 Mhz on stm32f427/429. We need
14782 to enable the power overdrive for this case. This change allows the
14783 required bits to be set in proper sequence. It also modifies the
14784 local register access operations to allow more than 16-bit registers.
14786 - STM32 F4: Add support for STM32F433RC. From Alan Carvalho de Assis.
14787 - STM32 F7: Add new configuration option for enabling flash ART
14792 - STM32 TIM: Add the set counter function for stm32 timers. From
14794 - STM32 HRTIM: Update HRTIM definitions. Add HRTIM driver. From
14796 - STM32 HRTIM: Add HRTIM character driver. From Mateusz Szafoni.
14797 - STM32 HRTIM: Fix DAC triggers configuration, Add missing master timer
14799 - STM32 HRTIM: Add DMA configuration. From Mateusz Szafoni.
14800 - STM32 HRTIM: Add burst mode configuration. From Mateusz Szafoni.
14801 - STM32 RTC: Port Boris Astardzhiev's RTC change for STM32L4 to STM32.
14802 - STM32 DAC: Add support for HRTIM triggering. Separate dma buffer
14804 - STM32 DAC: Conditional logic for timer triggering, fix TSEL
14807 - STM32 DAC: Support external triggering for DMA transfer. From Mateusz
14809 - STM32 L1 TIM: Add base address for TIM11. From Juha Niskanen.
14810 - STM32 F4 FLASH: Enable/disable the flash write protection on any
14811 sector. I have verified it to work on the STM32 F427. From Sebastien
14813 - STM32 F4 Clocking: To use an external oscillator module (not just a
14814 crystal) with the STM32F4, one needs to enable the HSEBYP bit in the
14815 RCC_CR register. This change allows an integrator to define
14818 - STM32 F4 USB: I'm working on bringing up USB full-speed support on
14821 config�STM32_OTGFS_VBUS_ CONTROL which lets us selectively disable
14822 VBus sensing and control.� I also sneaked in a change to disable the
14824 isn't supported yet.� The only pins that need to be initialized should
14826 - STM32 FLASH: Add CONFIG_STM32_STM32F469 support. From David Sidrane.
14827 - STM32 COMP: Add default INM configuration and some missing COMP
14829 - STM32 F33: Add missing SYSCFG CFGR3 definitions. From Mateusz Szafoni.
14830 - STM32 L4 Serial: Allow configuring Rx DMA buffer size. From Juha
14832 - STM32 L4 COMP: Input minus pin extended selection. From Juha Niskanen.
14833 - STM32 L4 COMP: Bind to upper half comp driver. From Pekka Ervasti.
14834 - STM32 L4 DAC: Port from STM32. Add ADC register definitions. From
14836 - STM32 L4 DAC: Add option for routing DAC output to ADC. Actually
14837 write something to the DAC DMA buffer. From Juha Niskanen.
14838 - STM32 L4 DAC: Separate DMA buffer configuration for channels. From
14840 - STM32 L4 ADC: Implement peripheral. From Juha Niskanen.
14841 - STM32 F7: Definitions for I2C4, SDMMC2. Adapted RAM start / size to
14843 - STM32 F7 I2C4: I2C4_SDA can also be on GPIO PB7. From Titus von
14845 - STM32 F7 LTDC: Option for DSI output, inconsistency: the stm32f746
14848 - STM32 F7 Clocking: Added functions for DSI clock source selection.
14850 - STM32 F7 Clocking: Enable APB2 DSI clock. From Titus von Boxberg.
14851 - STM32 F7 LTDC: No board specific dithering values used; corrected
14854 - STM32 F7 Reset: Added function for reset. From Titus von Boxberg.
14855 - STM32 F7 DMA: DMA add dcache alignment check in stm32_dmacapable. In
14856 the case dcache write-buffed mode is used (not write-through) buffer
14862 - STM32 F7 SDMMC: SDMMC remove widebus limitation on DMA. There is no
14865 - STM32 F7 SDMMC: SDMMC add dcache alignment check in
14868 - STM32 F7 RTC: Port Boris Astardzhiev's RTC change for STM32L4 to
14873 - STM32F103-Minimum: Add GPIO device driver example. From Alan
14875 - STM32F103-Minimum: Add small hello example for STM32F103-Minimum
14877 - STM32F103-Minimum: Add support for SmartFS on Winbond W25 SPI NOR
14879 - STM32F103-Minimum: (1) Enable CONFIG_MTD_PARTITION in Kconfig if flash
14881 needed to get SmartFS working. From Alan Carvalho de Assis.
14882 - Nucleo-F334R8: Add HRTIM initialization. From Mateusz Szafoni.
14883 - Nucleo-F334R8: UART2 is default serial port (STLINK Virtual Port).
14885 - Clicker2-STM32: Add a configuration that was used with the MRF24J60
14887 - Clicker2-STM32: Allow both IEEE 802.15.4 MAC character and network
14888 devices to be registered.
14889 - Clicker2-STM32: Add configurations to support the endpoint and hub
14891 - Clicker2-STM32: Add support for per-function-call stack checking.
14893 - Clicker2-STM32: Configure EDBG SPI CS just to make that it is
14895 - STM32F4 Discovery: Add logic to register the button driver and the
14897 - STM32F4-Discovery: Add a configuration for testing libc++. From Alan
14899 - B-L475E-IOT01A: Add support for the STMicro B-L475E-IOT01A board.
14901 - B-L475E-IOT01A: Add support for the SPSRGF/Spirit1 radio module. Add
14903 - B-L475E-IOT01A: Add configurations to support a star topology.
14904 - B-L475E-IOT01A: Add basic support for external Macronix QuadSPI flash
14906 - B-L475E-IOT01A: Enable UDP broadcast test in the spirit-starhub
14908 - STM32F334-DISCO: Add STM32F334-DISCO basic support. From Mateusz
14910 - STM32F746-Disco: Add ADC3 support. From Ivan Ucherdzhiev.
14911 - STM32L476-Disco: Add a knsh configuration that may be used to test
14913 - STM32F769I-DISCO: Initial port to STM32F769I-DISCO. From Titus von
14918 - Move TUN ioctl command to include/nuttx/net/ioctl.h so that it will
14920 - Math Library: Port gamma() and lgamma() from FreeBSD to NuttX. From
14922 - C++: Compilation with recent C++ compiler needs an overloaded delete
14928 - Initial clang compile. From Goran Mekic.
14929 - Add CLANG definitions in Kconfig and Toolchain.defs.
14930 - drivers/wireless/ieee802154: Moved radios to individual
14931 sub-directories. From Anthony Merlino.
14932 - Makefile.unix: Add savedefconfig target. From Gwenhael Goavec-Merou.
14933 - Add Gwenhael's change to Makefile.win and update README.txt to
14935 - All defconfig files are now in the compressed format created with
14936 'make savedefconfig.' The original .config file can be reconstituted
14938 - Build System: It is no longer necessary to have a unique Make.defs
14941 common Make.defs file moved to the scripts/ sub-directory for each
14943 - Networking: Move INET socket interface out of net/sockets to its own
14948 - testbuild.sh: Added -x to fail build on errors for continous
14949 integration (CI). On CI we want to know ASAP of a failure. From
14951 - Improve configure.sh behavior: (1) enable to call from top directory.
14952 (2) enable to designate direct path for config. (3) install .gdbinit
14954 - Update tools/configure.c to same functionality as configure.sh. Add
14956 optional file but other things like IDE-specific project files might
14957 need to be copied as well.
14958 - tools/configure.sh will now copy Eclipse project files if they are
14960 - Update configure.sh, configure.bat, configure.c: With compressed
14962 olddefconfig' to restore the uncompressed defconfig format. Also,
14963 while I was at it, I also added options to select host platform on
14965 - tools/refresh.sh: Now runs make savedefconfig before copying the new
14966 defconfig file in place; Also, added a new option --defaults. Since
14967 the number of defaults that you now have to answer is so large, the
14969 --silent but still prompts you for the decision to save or discard the
14971 - tools/refresh.sh: Update so that it can find the Make.defs file in
14976 - NSH Library: Add a Telnetd command. This is needed when network
14981 - NSH Library: Misc changes needed for PktRadio support.
14982 - NSH Library: Extend ifconfig command so that it can set variable
14984 - NSH Library: Update addroute and delroute command. The would support either
14985 IPv4 or IPv6, but not both. Allow expression of the netmask in IPv4 CIDR or
14988 - NSH Library: Add a route command that will dump the content of routing table.
14992 - examples/udp: Add configurable network device name; Add option to
14995 - examples/udp: Fix registration as a built-in program; Change some
14996 naming to make room for a second target. Current one endpoint is the
14998 to be both endpoints of the test. Change build so that both server
15001 - examples/udp: Port numbers need to be configurable to work with
15002 6LoWPAN. Need to bind the client socket to a port number. This was
15005 - examples/udp: Enable testing with the broadcast address.
15006 - examples/nettest: Support target boards on both ends of the test.
15009 confusion; Add command line option to select the server address on the
15012 - examples/nettest: The send buffer size is now a configuration option.
15013 - examples/nettest: Loopback option should be available in Kconfig for
15015 - examples/keypadtest: REMOVED and warehoused in the Obsoleted
15019 uses illegal interfaces, and is a test for non-existent code.
15020 - examples/ipforward: Add an IP forwarding example using only TUN
15021 devices. Test extended to test forwarding of ICMPv6 multicast messages.
15022 - Implement powermonitor example for ltc4151 current and voltage
15024 - examples/pf_ieee802154: Add for testing PF_IEEE802154 sockets. Add
15025 PANID to command line options; Cannot bind to address zero... There is
15026 no counterpart to INADDR_ANY for these radios (not now at least).
15027 - examples/dac: Add DAC example. From Juha Niskanen.
15031 - netutils/telnetc: This a port of libtelnet to NuttX.
15032 - netutils/telnetd and users of telnetd: Add support for IPv6.
15033 - netutils/thttpd: Remove the netstats demo. This depends on an
15036 for NSH which had the same issue. But I am too lazy to implement that.
15037 - netutils/netlib: Add support for PktRadio IOCTL commands.
15038 - netutils/netlib: Add a helper to decode short addresses.
15042 - wireless/ieee802154/i8sak: Rewrote i8sak to be test CLI for IEEE
15044 - wireless/ieee802154/i8sak: Updates to i8sak for
15045 association/beacon-enabled changes to IEEE 802.15.4. From Anthony
15047 - wireless/ieee802154/i8sak: Add option to make it easy to send large
15049 - wireless/ieee802154/i8sak: Add scan command. From Anthony Merlino.
15050 - wireless/ieee802154/i8sak: Add coordinfo command allowing you to
15051 poll various attributes related to the coordinator. From Anthony
15053 - wireless/ieee802154/i8sak: Add a option to retry on failures to the
15055 - iwireless/ieee802154/8sak: Add reset command to reset the MAC layer.
15056 Adds option to assoc command -t to specify how long to wait for a
15058 - ieee802154/i8sak: Adds command to trigger regdump of radio. From
15063 - apps/system/composite: Update to apps/system/composite assocated with
15064 big changes to the composite device logic. From Frank Benkert.
15065 - apps/system/composite: Remove CDC/ACM and MSC configuration logic.
15067 that you can select the USB composite configuration to be attached.
15071 add a configuration option to select the default configuration.
15072 - apps/system/composite: Add a configuration option to the boardctl()
15073 calls to support multiple composite device configurations dynamically.
15074 - apps/system/composite: Remove references to USBMSC. There still
15076 - apps/system/telnet: Add Telnet Chat deamon and client from
15079 * Platform-Specific Support (apps/platform)
15087 - Fix ELF loader up_checkarch on ARM arch. From Cristian Condurache.
15088 - pthread_mutex_unlock(): Missing check for the case where
15092 - sig_timedwait(): Pending signal structure used after it has been
15094 - mm_mallinfo: do heap end debug assert check with heap semaphore held.
15096 - sched/: Fix return value in sched_setaffinity(). From Masayuki
15098 - Work Queues: work_queue() must cancel existing work prior to queuing
15101 - waitpid(): Corrects two problems when CONFIG_SCHED_HAVE_PARENT +
15108 - VFS poll(): Fix timeout calculation. From Jim Paris.
15109 - VFS poll(): Fix poll for regular files and block devices. Open Group
15113 - VFS epoll(): Fix epoll_wait function. From Simon Piriou.
15114 - Smart FS: Fix wrong freeing of device structure and use-after-free
15116 - MTD FLASH drivers: The byte write method of several drivers had a
15119 - MTD M2PX: If we READ while a write/erase is pending, the command is
15121 we will return garbage to the user because the flash will not execute
15123 the bus must be locked since it's a precondition to calling
15125 - MTD FLASH drivers: Clone Sebastien Lorquet's m25px change to at25,
15127 - MTD W25: Add missing locking and fix SPI_SELECT usage for
15129 - MTD W25: Wait for BUSY flag to clear in w25_readid and
15132 BUSY flag in status register is '1'. Therefore wait for busy flag to
15134 - Automounter: FS_AUTOMOUNTER should depend on SCHED_LPWORK. From
15139 - TCP Listen: Throw error when error happens in the tcp_listen
15141 - Nework Device Management: Do not search net device when all-zeros
15143 - Network Device Management: Fix a error in netdev_register(); it was
15145 - Network Device Management: Fix netdev_dev_lladdrsize(). In some
15148 - Network Device Management: Fix typo for 802.11 devices in
15151 - TUN Driver: Use critical section instead of semaphore in
15153 - TUN Driver: Do all polling on worker thread. Otherwise, the stack
15155 - TUN Driver: Currently cannot support TAP mode unless Ethenet is
15157 - netdb: Fixed buffer size used for sending DNS queries should depend
15159 - UDP networking: The TTL (time to live) was not being set in the IPv4
15161 - UDP Networking: Fix a copy-paste error that could effect networking
15162 when both IPv4 and IPv6 are enabled.
15163 - UDP Networking: When upd_input() cannot process a packet, it returns
15165 this case, it must also set d_len to zero. Otherwise, all network
15168 - TCP Networking: Correct some issues that prevent TCP from working
15169 correctly when both IPv4 and IPv6 are enabled.
15170 - TCP Networking: TCP disconnection callbacks are not retained in a
15171 list. This will support multiple callbacks per lower-level TCP
15173 dup'ed and shares the same lower-level connection structure. NOTE:
15174 There still needs to be a call to tcp_start_monitor() when the socket
15176 - TCP Networking: Start the network monitor for a socket when a TCP
15178 - TCP Networking: If one of the dup'ed socket's is closed, then network
15184 - TCP Networking: Fix a race condition. The accept() operation is
15189 - Network routing tables: Fix a compilation error when IPv6 and
15191 - Network procfs: Fix some spacing when both IPv6 and IPv4 are enabled.
15192 - Network Local Sockets: Fix accept for local stream sockets. From
15194 - Network Local Sockets: Fix server lc_waitsem overflow. From Jussi
15196 - IPv6 Networking: Remove comparisons to the address with all ones
15199 - ICMPv6 Networking: Fix a compilation issue with
15201 - Networking: Fix net_lock returning ERROR when instead of real error
15203 - IGMPv2 Networking: Remove special support for interrupt level
15210 - IEEE 802.15.4 MAC: Need counting protection on the logic that
15213 - IEEE 802.15.4 MAC: Improves internal timer logic to handle work
15214 serially. Before, the MAC timer used a watchdog to schedule work with
15216 is supposed to be serialized through the use of the high priority work
15218 consequences. To simplify, we now use the delayed work feature of the
15220 - IEEE 802.15.4 Network Driver: Update RX statistics in network driver.
15221 - IEEE 802.15.4 MRF24J40 Driver: Minor timing fix. Matches recommended
15222 value in datasheet. Splits up driver into multiple files to make it
15223 easier to navigate. Fixes issue with non-beacon enabled mode. From
15225 - IEEE 802.15.4 MRF24J40 Driver: Fix a bug causing radio to cease
15227 - IEEE 802.15.4 MRF24J40 Driver: Fixes issues with sleeping for beacon
15229 - EEE 802.15.4 MRF24J40 Driver: Fix math error for calculating sleep
15231 - IEEE 802.15.4: Fix timing issues for beacon enabled coordinators and
15233 - iIEEE 802.15.4: Fix issue with association on beacon-enabled
15235 - 6LoWPAN: Correct a few addressing issues. Also reserve two bytes at
15237 - 6LoWPAN: Fixes needed when extended addressing is enabled; broke short
15238 addressing. Loopback driver needs to initialize the MAC meta data;
15239 Address decompression logic must have the MAC address to handle the
15242 - 6LoWPAN: Add missing IPv6 address creation to HC1 decode logic. Fix a
15244 - 6LoWPAN: TCP logic was not obeying MTU packet size limitations.
15245 - 6LoWPAN: Major re-architecting of TCP logic to properly handle TCP
15248 - 6LoWPAN: HC06, copy TCP header as though it were data. TCP packet
15249 reassembly now seems to work OK.
15250 - 6LoWPAN: Fix duplicate and bad memcpy in loopback driver.
15251 - 6LoWPAN: Fix a misconception about HC06 16-bit IPv6 address
15253 - 6LoWPAN: TCP send logic was returning a failure in one case when, in
15258 - USB MSC: Use struct instead of pointer to the struct as sizeof
15259 argument in memset in usbmsc.c. Otherwise it leads to error: argument
15260 to sizeof in memset call is the same pointer type struct usbmsc_lun_s
15262 - USB MSC: Add missing logic to define endpoints. The composite
15263 …changes broke the the non-composite, USB MSC only case because it omitted the critical setup when …
15264 - USB CDC/ACM. Fix several known problems resulting from merge of USB
15265 composite device. That merge now breaks some of the non-composite USB
15267 - Button Driver: Interrupts weren't enabled since nothing updates them
15270 - ADC Driver: Fix some data alignment issues in the ADC driver.
15271 - I2C Drivers: Handle I2C_TRANSFER return value consistently. Some I2C
15275 - COMP Driver: Fix compilation errors when poll disabled. From Mateusz
15280 - Simulation: Fix mkdir issue in GNU target. From Simon Piriou.
15281 - Simulation: x86 stack needs to be aligned to 16-byte boundaries.
15282 - Simulation: Fix building 32-bit simulation on 32-bit X86. From Jussi
15287 - ARM: The older ARM7 and ARM9 configurations were determining CFLAGS
15288 based on the GCC version 4.x.x or not. That needx to be extended for
15291 * ARMv7-M:
15293 - Fixed ARMv7-M Toolchain setting. Cortex-M4 only have Single
15295 - ARMv7-M syscall logic: Clear bit 0 in PC settings. Bit 0 is the
15302 - Fix ESP32 gpio enable reg and default UART pin. Modify default UART
15303 pin for ESP-WROOM-32. Fix gpio enable reg. From Sungki Kim.
15307 - SAMD21: Fix some SPI-related issues. From Matt Thompson.
15308 - SAMD21 SPI: I was having issues with the bus freezing up .. slaves
15312 device responded to an address packet. Assuming that the chip will
15313 always give an interrupt status, I believe it's possible to eliminate
15315 - SAMD/L21: Need to preserve errno value across syslog() call.
15316 - SAMD21: Changes needed to get USB working. From Matt Thompson.
15320 - SAMv7 TWIHS: TWIHS driver add reference counting. From David Sidrane.
15321 - SAMv7 CAN: We discovered a problem with the samv7 mcan driver which
15324 to a CAN network with a wrongly configured CAN speed (baud rate). In
15325 our tests we set the CAN speed of the device to 1000000 and the speed
15326 of the other CAN nodes to 500000. The device is restarted and sends a
15327 CANopen "bootup message" to the CAN network. This results in huge
15331 CAN chip reports lots of errors, which are reported to the application
15334 interrupt load is very high in this scenario. To fix the problem the
15338 - SAMv7 CAN: I discovered while working on the SAMV7 mcan driver that
15347 - SAMv71-XULT: Fix MRF24J40 interrupt GPIO number.
15351 - Kinetis MPU: Disable MPU when not in protected mode. The hardware
15353 access to memory. Unfortunately USB and SDHC have there own DMA and
15354 will not have access to memory in the default reset state. This change
15356 - Kinetis MPU: Fixed warning for kinetis_mpudisable. Missing header
15358 - Kinetis SIM: Ensure isolation of clock dividers for 0 value case.
15361 decremented to -1 (0xffffffff) spilling over to other clockdivN
15366 - i.MX6: Fix a wrong parameter passed when calling irq_attach() in
15368 - Based on Masayuki's change, I review all serial driver vector
15370 drivers to current interrupt parameter passing.
15374 - STM32 F410 Kconfig: Fix peripherals available on the STM32 F410.
15376 flavor. From Gwenhael Goavec-Merou.
15377 - STM32 L4 DMA: Correct USART3_RX bad channel definition. From Juha
15379 - STM32 L4 PWR: Correct PWR_SR2 REGLPS and REGLPF bits, add port I
15382 - STM32 F7: do not enable read-modify-write on DTCM. "AN 4667 - STM32F7
15383 Series system architecture and performance" recommends to disable
15384 read-modify-write on DTCM: "If the DTCM-RAM is used as data location
15387 to disable the read-modify-write of the DTCM-RAM in the DTCM interface
15388 (inthe DTCMCR register) to increase the performance." From Jussi
15393 - STM32 TIM3/4 are always 16-bits; never 32-bits. Noted by Eetu
15395 - STM32 ADC: Invalidate dma buffer before use. Missing invalidation
15397 - STM32, STM32L4, STM32F7 ADC: Fix channel 18 sample time. From Juha
15399 - STM32 DAC: Fix some configuration logic. When STM32_NDAC is greather
15401 - STM32 DAC: Fix compilation when DMA disabled for channel. From
15403 - STM32 F0: Fix some funny shifts in DAC header files. From Juha
15405 - STM32 F1 RTC fixes: (1) Compile issues because of missing RTC_MAGIC
15408 reset in up_irqinitialize, (4) write access to backup registers
15409 without enabling access to backup domain, (5) possible races in
15412 - STM32/STM32 L4 PWM: While attempting to output a 70 MHz square wave
15415 output up to 70 MHz. I am not sure this affects most users
15416 generating slow PWM but for frequencies close to the PCLK, the
15418 - STM32 L4 I2C: Set I2C SDA and SCL pins to open drain mode. From Pekka
15420 - STM32 L4 I2C: I2C4 was writing to wrong RCC registers. From Juha
15422 - STM32 L4 DAC: Report transfer as completed in DMA callback. Without
15425 - STM32 L4 COMP: comparators share RCC enable bit with SYSCFG. From
15427 - STM32 L4 ADC: Correct EXTSEL macros. From Juha Niskanen.
15428 - STM32 L4 TIM: TIM15,16,17 are always in APB2. From Juha Niskanen.
15429 - STM32 F7 I2C: Set I2C4 SDA and SCL pins to open drain mode. From Juha
15431 - STM32 F4 RTCC: ISR register and write protection fix. From Eetu
15433 - STM32 F7 Ethernet: Fix typo in header; Add memory sync barrier
15434 between writing to DMA TX descriptor and restarting DMA TX. Avoid
15436 poll cycle instead. Nucleo-144: Fix RMII TXD1 signal, connected to
15437 PB13 not to PG14. From savinz.
15438 - STM32 F7: Added missing config option for register value debugging.
15440 - STM32 F7: No FSMC, only FMC for STM32F7. From Titus von Boxberg.
15441 - STM32 F7: HEAP2 depends on CONFIG_ARCH_HAVE_HEAP2, not on particular
15443 - STM32 F7: STM32_RCC_DCKCFGR2 has nothing to do with PLLI2S; PLLI2S is
15446 - STM32F7: Some STM32F7 builds failed in build testing due to undefined
15449 - STM32 F7: dcache write-buffed mode is used (not write-through) buffer
15458 - STM32F103-Minumum SPI: SPIDEV_WIRELESS used when this has
15459 changed to SPIDEV_CONTACTLESS. From Nicolas Estibals.
15460 - configs/: a few more places where SPIDEV_WIRELELSS should be
15462 - STM32F103-Minumum: Fix a BUG when reading from output pin. We need
15463 a different read_ops to read from output pin. This patch fixes the
15465 - STM32F103-Minumum: Use separated read_ops for GPIO interrupt pins.
15467 - STM32F103-Minumum: Fix compiler error in MCP2415 logic.
15468 - STM32F746G-DISCO: Fix for compilation of STM32F746G-DISCO. From Ivan
15470 - STM32F746G-DISCO: Fix for stm32f746g-disco board for button support
15477 - Fix -Werror=implicit-fallthrough on gcc7. From Julien Lecoeur.
15478 - configs/Board.mk: Remove comment form end of line. In windows native
15479 build, it appears to be trying to make that an extra parameter to the
15481 - configs/Board.mk: Remove quotes from CONFIG_ARCH_FAMILY. Causes
15483 - Makefile.win would only create uboot images for ARM. MIPS support
15488 - C++: Fix C++ __guard implementation for ARM. The standard C++ ABI
15489 that most platforms follow defines __guard to be 64 bits. The existing
15491 32-bit ARM C++ ABI defines it as 32 bits instead, and changes the
15493 GCC creates guard symbols without regards to what libxx_cxa_guard.cxx
15496 by special-casing 32-bit ARM in libxx_cxa_guard. From Jim Paris.
15497 - C++: In cwchar it uses CONFIG_LIBC_WCHAR to only export the wc/mb
15498 functions. When a build does not want to use wide or multibyte char
15499 CONFIG_LIBC_WCHAR is not set. Therefore we should to only export the
15502 wint_t, wctype_t need to be exported. From David Sidrane.
15503 - C Library: Fix an error in mkstemp() the could result in an infinite
15505 - C Library: (1) Fix an error in mkstemp() the could result in an
15508 further invocations of mkstemp(). But, the output has to be FILE01,
15513 - C Library: gethostbyname_r: Fix check for space in buffer.
15514 - C Library: inet_ntop() was printing negative values for fields >127.
15515 - Math Library: Fix wrong output in modf() API. The sign of integral
15519 - Math Library: Fix wrong output in ceil() API. Ex:for input x = 1.0,
15524 - tools/testbuild.sh: Fix missing $ before variable name.
15525 - tools/mkdeps.c: Eliminate a warning. MAX_PATH may already be defined
15530 - All apps/ Makefiles: Add .PRECIOUS: apps/libapps.a to every
15531 Makefile. Hopefully this will end awkward problems when you Control-C
15533 - platform/Makefile: More attempts to fix for Windows native build.
15538 - NSH network initialization: Fix some ieee 802.15.4 initialization
15540 hard-coded but must come from the coordinator. Re-factor a function
15544 - NSH Library: Fix copy-paste typo in nsh_usbconsole.c. From Oleg
15546 - NSH Library: fix size of 6LoWPAN extended address.
15547 - NSH Library: Fix build break in nsh_command.c with IPv4/IPv6 dual
15549 - NSH Library: Correct parsing of ifconfig so that you can specify the
15554 - examples/smart: Fix some compilation errors. Obviously this test has
15556 - examples/udp: Renaming some files to prevent name collision in
15558 - examples/nettest: Renaming some files to prevent name collision in
15560 - examples/nximage: Remove unused global variable.
15561 - examples/nsh: Remove APPNAME, PRIORITY, and STACKSIZE settings from
15562 Makefile to avoid showing nsh in Builtin Apps. From Masayuki Ishikawa.
15566 - netutils/tftpc: Missing header file causes errors in some
15568 - netutils/tftpc: TFTPC depends on CONFIG_NET_IPv4.
15569 - netutils/netlib: Fixes to work when only USRSOCK is enabled.
15570 - netutils/netlib: Fix netlib_nodaddrconv() so that its return type is
15572 - netutils/netlib: If only PF_IEEE802154 socket family is enabled, then
15574 - netutils/ftpc: Fix some memory leaks. From Boris Astardzhiev.
15575 - netutils/thttpd: Fix a malformed if condition detected by GCC 6.x.x.
15576 - netutils/dhcpd: Prevent buffer overflow in dhcpd_addoption. offset
15583 - wireless/ieee802154/i8sak: Need to increment the next_saddr after
15588 - correct copy-paste typo in comments in composite_main.c From Oleg
15590 - system/dhcpc: The DHCPC renew command did not build correctly due to
15592 - system/dhcpc: Fix warning about renew_main.o appear twice in rule.
15596 - tools/mkkconfig.bat: Use %cd% instead of %~dp0 for usage of APPSDIR
15598 - tools/mkkconfig.bat: Remove quotes in echo. These were begin
15600 - Windows build fixes: tools/mkkconfig.bat - switch APPSDIR path to
15601 use forward slashes for kconfig-frontends. interpreters/ficl -
15602 Reorder some targets that causes GNUwin32 make to behave badly. From
15605 NuttX-7.23 Release Notes
15606 ------------------------
15610 that release consists of two tarballs: nuttx-7.23.tar.gz and
15611 apps-7.23.tar.gz. These are available from:
15616 Both may be needed (see the top-level nuttx/README.txt file for build
15623 - sem_open() should return SEM_FAILED on any failures. This is change
15626 - exec(): The non-standard interface exec() is now enshrined as a
15628 this is probably the only want to load programs in the protected
15633 of code in the user-space blob so that is they exec() is really
15639 - OS Internal Functions: Rename many OS internal functions so it is
15643 - Cancellation Points: Add new cancellation point interface,
15645 - Signals: Add logic to wake up a thread that is waiting on a signal
15647 - sigtimedwait(): Add logic to suppress the wait if there is a
15649 - clock_nanosleep(): Implement clock_nanosleep(). nanosleep() is now
15650 reduced to a libc wrapper around clock_nanosleep().
15651 - task_delete(): Do not permit user applications to delete kernel
15653 - kthread_create(): Rename kernel_thread() to kthread_create() for
15655 - boardctl(): Remove the BOARDIOC_GRAPHICS_SETUP command.
15656 - TCB: Move POSIX thread specific data from pthread TCB to common TCB
15659 pthread data with config option CONFIG_DISABLE_PTHREAD=y. From Jussi
15661 - mm: Remove the CONFIG_GRAN_SINGLE configuration option. It adds no
15665 - mm: Add a function to get information about the state of the
15670 - MT25Q Serial FLASH: Add support for Micron MT25Q series MT25Q128.
15672 - MX35LFxGE4AB: Add an MTD driver for Macronix MX35LFxGE4AB serial
15674 - FileMTD: Add block device MTD interface. Block MTD interface
15675 allows using block device directly as MTD instead of having to use
15676 file-system in between. NOTE that this provides the opposite
15679 - BCH: The character driver to block device access now supports an
15680 IOCTL to get the geomtry of the underlying block device.
15681 - mkfatfs: Remove mkfatfs from the OS. This is a user-space
15683 - procfs: Implements procfs /proc/fs/blocks and /proc/fs/usage files,
15686 - procfs: Add /proc/meminfo. This is an alternative way to get the
15694 - UserFS: Adds the UserFS client and of the UserFS feature in
15696 message queues. Easier to transfer big data in local sockets than
15697 message queues. However, that lead to certain inescapable deadlock
15698 conditions So the IPC was converted to UDP LocalHost loopback
15700 operations on the top level pseudo-file system inode tree. That
15709 - Framebufer character driver: Add framebuffer character device driver.
15710 - LCD Framebuffer: Add support for a generic front-end that will
15712 - Framebufer character driver: Include support for LCD drivers that
15714 when there is an update to a region in the framebuffer.
15715 - LCD: Make LCD driver configuration indepently selected from NX
15717 error checking but is a necessary step in order to make LCD drivers
15722 - Networking: Add implementation of logic for SIOCGIFCONF and
15724 - Network IOCTLs: Add support for the SIOCGIFBRDADDR ioctl() command.
15725 - Routing Tables: Permit IPv4 and IPv6 routing tables to be of
15727 - Routing Tables: Adds support for read-only routing tables. Prior
15728 to this change, routing tables were only support in RAM and had to
15729 be initialized with explicit logic to add the necessary routes to
15731 pre-initialized, read-only routing table provided by the
15732 board-specific logic.
15735 packets to go to the single adaptor in all cases. So for that
15736 behavior you could add a read-only routing table to the
15737 board-specific long that contains a single entry, the default route:
15739 - Routing Tables. Added support for routing tables in files in a file
15740 system. This might be useful for customized, per-unit routing
15743 think it probably should have a small, in-memory cache of most
15745 2. Currently the delroute logic is disabled due to a problem with
15747 Therefore, it is not possible to delete entries from the routing
15750 might include a tag on each record to indicate if the record is
15751 valid or not. That would work but would add complexity to the
15753 - Routing Tables: Add support for an in-memory routing table cache in
15754 order to improve performance when the routing table is retained in a
15756 and so can eliminate some file access. Flush the in-memory cache
15758 matching an IP address is found, add the routing table entry to the
15760 - Routing Tables: Add logic to mark a route as most-recently-used in
15762 - ICMP: This change adds support for semi-standard IPPROTO_ICMP
15765 - ICMPV6: This commit adds support for semi-standard IPPROTO_ICMP6
15766 sockets. This is a replacement for the non-standard ICMPv6 ping
15768 - ICMPv6: Add option to manually specify router prefix in router
15770 - Local Sockets: This commit modifies the Unix domain local socket
15772 implementation maintained file descriptors to interrupt with the
15779 converts the usage of file descriptors to detached files throughout
15784 - IEEE-802154: Adds support for receiving MAC events via IOCTL through
15786 - IEEE-802154: Simplifies notify() and rxframe() calls to a single
15789 - MAC802154: Add support for getting promiscuous mode state From
15791 - MAC802154 Character Driver: When in promiscuous mode, the char
15793 change adds an offset field indicating the header-payload boundary.
15794 It is set to 0 when not in promiscuous mode as the header is not
15795 passed to the application
15796 - 6LoWPAN: Remove CONFIG_NET_6LOWPAN_FRAMELEN. In this case where
15798 now always queries the driver to get the maximum frame length.
15799 - 6LoWPAN: Support sending to a router that is on-link and may be
15800 able to forward the packet for us if the destination is not
15802 - XBee: Adds XBee S2C (802.15.4 firmware) support. XBee driver
15807 - PowerLED: Add upper-half driver for high power LED driver (powerled)
15809 - RTC Driver: Add periodic alarms to upper and lower halves. From
15811 - Pipes: Fix writing large buffers not triggering POLLIN for reader
15813 - USB CDC/ACM Device: Add support for RX flow control to the CDC/ACM
15815 - USB CDC/ACM Device: Add support for flow control TERMIOs in CDC/ACM
15817 - USB RNDIS Device: Add RNDIS-over-USB driver. From Sakari Kapanen
15818 with added Hi-Speed support from Masayuki Ishikawa.
15819 - Loop Driver: Don't use file descriptors... Use the internal file
15822 - APA102 LED controller: Add driver for APA102 LED controller. These
15824 - INA219. Add INA219 Driver. The INA219 is a combined voltage and
15825 current sensor that can measure up to 26 volts and a current that
15832 - PCA9555: The IRQ subsystem now supports passing a void * parameter
15833 to IRQ handlers. Use that method to support multiple PCA9555
15834 devices, by passing a pointer to the device to the board defined IRQ
15841 - APDS-9960: Add driver for the APDS-9960 gesture sensor. From Alan
15843 - MAX7219: Add support to MAX7219 LED Matrix as LCD interface. From
15845 - WM8774: Add WM8774 audio DAC support. From Masayuki Ishikawa.
15846 - Nunchuck: Add Nintendo Wii Nunchuck driver. From Alan Carvalho de
15851 - Simulation: Add a configuration for non-graphical testing of the
15853 - Simulation: Add a configuration for testing the UserFS using
15858 - BCM2708: Add enough infrastructrue (more stubs) to get a clean
15862 logic, boot-up files, GPIO support, tickless timer, build and
15867 - Raspberry Pi Zero. Basic board support at configs/pizero. Untested
15872 - XMC4500-Relax: Add config for UART3 on RXD P0.0 and TXD P0.1 pins.
15877 - Open1788: Add initialization of Framebuffer driver. Add
15882 - LPC43xx: Add LPC43xx CAN driver. From Alexander Vasiljev.
15886 - MCB1700: Add support for Keil MCB1700 board. From Alan Carvalho de
15888 - Open1788: Add support for the discrete joystick driver.
15889 - Open1788: Add a configuration for testing pdcurses with discrete
15894 - LC823450: Add ADC driver and watchdog drivers. From Masayuki
15896 - LC823450: Add IPL2 support. From Masayuki Ishikawa.
15897 - LC823450: Add I2S support. From Masayuki Ishikawa.
15898 - LC823450: Add auto LED for CPU activity. From Masayuki Ishikawa.
15902 - LC823450-XGEVK: Enable ADC and watchdog driver. From Masayuki
15904 - LC823450-XGEVK: Add IPL2 support. From Masayuki Ishikawa.
15905 - LC823450-XGEVK: Add WM8774 support. From Masayuki Ishikawa.
15906 - LC823450-XGEVK: Add auto LED support. From Masayuki Ishikawa.
15907 - LC823450-XGEVK: Enable CONFIG_SMP for audio. From Masayuki Ishikawa.
15908 - LC823450-XGEVK: Add rndis configuration. From Masayuki Ishikawa.
15912 - ARM Kconfig: Add support for classic ARM11 architecture selections.
15913 - STM32 Tickless: Removes the restriction to 16-bit counts when a
15914 32-bit timer is used for tickless operation on the stm32. As it
15918 - STM32 L4 Kconfig: Add some L486 and L496 chips. From Juha Niskanen
15919 - STM32 F7: Adds architecture support for the STM32 F72x and F73x
15921 - STM32 F7: Allow changing voltage output scaling setting and
15922 prevents enabling over-drive mode for low frequencies (STM32 F74xx,
15928 - STM32 ADC: Added support for ADC's IO_ENABLE_TEMPER_VOLT_CH ioctl
15930 - STM32 Wakeup: Add logic for enabling wakeup pins. From Oleg Evseev.
15931 - STM32 PWR: Adds stm32_pwr_getsbf and stm32_pwr_getwuf functions
15934 - STM32 HRTIM: Sdd support for capture, chopper, deadtime and dump
15936 - STM32 RTC: Canceling an alarm marks it as inactive. From Juha
15938 - STM32 Serial: Add interface to get uart_dev_t by USART number,
15940 - STM32 F33xx ADC: Initial ADC support for the STM32F33XX. From
15942 - STM32 F33xx ADC: Add ADC DMA support to STM32F33 configuration. From
15944 - STM32 L4 ADC: Port analog watchdog ioctl commands from the Motorola
15946 - STM32 L4 ADC: Add option for routing ADC data to DFSDM, fix DFSDM
15948 - STM32 L4 ADC: Add PM hooks from Motorola MDK
15949 - STM32 L4 FLASH: Add function for modifying device option bytes,
15951 - STM32 L4 DFSDM: Add peripheral support for digital filters for
15952 sigma-delta ADCs. Initial version. Timer trigger support is not
15954 - STM32 L4 I2C: Port then STM32 F7 I2C driver to STM32 L4. STM32L4 I2C
15955 driver is in work-in-progress state (plentiful of TODOs and
15956 #warnings) and lags many features found in more up-to-date STM32 I2C
15959 more 'ready to use' state. The I2C clock configuration is kept the
15960 same as before (I2CCLK = PCLK1 80 Mhz) instead of switching to
15961 STM32F7 arch default that is I2CCLK=HSI. Further work would be to
15963 current hard-coded default. From Jussi Kivilinna.
15964 - STM32 L4 RTC: Add up_rtc_getdatetime_with_subseconds
15965 - STM32 L4 RTC: Change maximum alarm time from 24h to one month. From
15967 - STM32 L4 RTC: Add support for periodic interrupts with
15969 - STM32 L4 SDMMC: Add support for an SDMMC driver. From Miha Vrhovnik.
15970 - STM32 L4 Serial: Suspend serial for Stop mode. From Juha Niskanen.
15971 - STM32 L4 Serial/PM: STM32L4 serial PM interface improvements:
15978 - STM32F103-Minimum: Add board support for APA102 driver. From Alan
15980 - STM32F103-Minimum: Add ADC support on stm32f103-minimum board.
15982 - STM32F103-Minimum: Add support for LM75 in the stm32f103-minimum
15984 - STM32F103-Minimum: Add an ADPS-9960 example configuration. From
15986 - STM32F103-Minimum: Add board support for MAX7219 LED Matrix
15988 - STM32F103-Minimum: Add USB MSC device initialzation to
15989 stm32f103-minimum. From Alan Carvalho de Assis.
15990 - STM32F103-Minimum: Add framebuffer driver initialization for
15991 stm32f103-minimum board. From Alan Carvalho de Assis.
15992 - STM32F103-Minimum: Add Nunchuck board support for
15993 stm32f103-minimum board. From Alan Carvalho de Assis.
15994 - STM32F4 Discovery: Add support for JLX12864G display on STM32F4
15996 - Viewtool-STM32F107: Add support to auto-mount the procfs file system.
15997 - Photon: Support SPI1 and SPI3. From Anthony Merlino.
15998 - STM32F334-DISCO: Add lower half driver for high power LED
16000 - STM32F334-DISCO: Add flash mode support for powerled driver. From
16002 - STM32F334-DISCO: Add powerled example configuration. From Mateusz
16004 - STM32F334-DISCO: Add lower-half driver for SMPS (buck-boost onboard
16006 - Nucleo-F334R8: Add logic for zero latency high priority interrupts
16008 - Nucleo-F334R8: Add highpri example configuration. From Mateusz
16010 - STM32 F4 Discovery: Added support for the LIS3DSH accelerometer on
16012 - STM32 F4 Discovery: ROMFS for STM32F4 Discovery board. From Tomasz
16014 - STM32 F4 Discovery: Add a USB MSC configuration. From Alan Carvalho
16016 - STM32 F4 Discovery: RNDIS support on STM32F4Discovery + DM-STF4BB.
16019 - STM32 F4 Discovery: Add STM32F4 Discovery board support for
16021 - STM3240G-EVAL: Add a configuration for testing the Framebuffer
16023 - STM3240G-EVAL: Mount procfs if enabled.
16024 - STM3240G-EVAL: Add support for pdcurses and the pdcurses demo
16026 - Clicker2-STM32: Adds SD card, automount, and syslog file
16028 - Clicker2-STM32: Adds support for USB RNDIS device. From Anthony
16030 - Olimex STM32-H407: Add serial support on the on-board UEXT
16033 - Nucleo-F410RB: Add support for the nucleo-F410RB board. From
16034 Gwenhael Goavec-Merou.
16035 - STM32F429i-DISCO: Add framebuffer driver initialization. Add a
16037 - STM32F429i-DISCO: Add logic to auto-mount procfs. Enable procfs in
16039 - STM32F429i-DISCO: Enable support for the STMPE811 touchscreen
16042 - STM32F429i-DISCO: Convert NxWM configuration to use LTDC
16044 layers from 4 to 1 in fb configuration. Only one layer is used.
16045 - STM32L476-MDK: Add support for the on-board LEDs.
16046 - Nucleo-L496ZG: Add DFSDM initialization. From Juha Niskanen
16047 - Nucleo-L496ZG: Add support for SDMMC driver. From Miha Vrhovnik.
16048 - Nucleo-L496ZG: Enable I2C4 bus with i2ctool in NSH configuration.
16050 - Nucleo-L496ZG: Make HSE on Nucleo-L496ZG default to enable USB.
16052 - Nucleo-F746ZG: Use the serial console over /dev/ttyACM0 by default.
16053 The Nucleo-F746ZG doesn't come with Arduio RS-232 shield, then it is
16054 better to use the serial over the /dev/ttyACM0 that is created
16057 - Nucleo-144: Adds support for the Nucleo-144 boards with
16062 - z80/include: compiler.h, limits.h, types.h: Update SDCC/z80 files
16063 to include support for long long, inline, __FILE__, and __func__.
16067 - include/: Add stdnoreturn.h. Holds definitions for the C11
16068 noreturn keyword. Applies to C too.
16069 - include/netinet/tcp.h: Add trivial standard tcp.h header file.
16070 - libc: Add support for readv() and writev().
16071 - libc: Adds tcflow().
16072 - libc: Add support for sigwait().
16073 - libnx: Changes to allow the font subsystem to be built without
16075 CONFIG_NXFONTS and CONFIG_NXGLIB. Needed to duplicate some Kconfig
16081 - tools/configure.sh: Add special support so that you can start with a
16084 - tools/configure.c: Duplicate new functionaity added to configure.sh.
16085 - tools/configure.sh: This commit adds a -m option for macOS. For
16086 anyone not aware, Apple renamed OSX to macOS recently; thus the 'm'
16087 instead of 'o'. This does not change the other uses of *_OSX to
16089 - tools/configure.c: Update functionality to match last change to
16094 - apps/nshlib: mount command no long uses the non-standard OS
16096 when there are no arguments to the mount command.
16097 - apps/nshlib: df command no long uses the non-standard OS interface
16100 - apps/nshlib: The free commands no longer used mallinfo() to get
16105 FLASH is used to hold modifiable data. The free command has been
16106 extended to just dump the content of procfs entries and to include
16112 - apps/examples/fb: Add a simple test for the framebuffer character
16114 - apps/examples/ostest: sem_open() now returns SEM_FAILED in the
16116 - examples/ostest: Extend cancellation test to make sure that
16119 - Added a simple reader example for the LIS3DSH acceleration sensor
16121 - apps/examples/apa102: Add a Rainbow example for APA102 LED Strip.
16123 - apps/examples/flowc: Add a simple test of serial hardware flow
16125 - Add powerled driver example. From Mateusz Szafoni.
16126 - apps/examples/ina219: A simple infinite loop that polls the INA219
16128 - apps/examples/alarm: Add options for reading alarm value and
16130 - Add -n samples to lm75 app and replace Centigrade with Celsius.
16132 - apps/examples/adps9960: Add ADPS-9960 example. From Alan Carvalho
16134 - apps/examples/obd2: Add OBD2 example application. From Alan
16136 - apps/examples/userfs: Add a test case for verifying UserFS.
16137 - apps/examples/smps: Add SMPS driver example. From Mateusz Szafoni.
16138 - apps/examples/pdcurses: Bring in pdcurses demos and make them
16139 conform to the NuttX coding style.
16140 - apps/examples/pdcurses: Add a very simple example that just shows
16141 the entire character set (7-bit only). It adapts to the size of
16144 - apps/examples/nunchuck: Add Nunchuck example application. From
16149 - apps/fsutils/mkfatfs: Move mkfatfs from the OS to here.
16153 - apps/netutils/netlib: Add netlib_ipv6adaptor() and
16155 - apps/netutils/netlib: Add helpers for reading the routing table:
16157 - apps/netutils/netlib: Add new utilities netlib_ipv[4|6]router()
16158 that can be used to determine the IP address of a router that would
16161 - apps/netutils/ftpc: Adds support for IPv6 and fixes various
16166 - apps/canutils/libobd2: Add libobd2 for NuttX. From Alan Carvalho
16171 - graphics/traveler: Convert to use the framebuffer driver.
16172 - apps/graphics/pdcurs34: This commit brings the public domain
16175 currently limited to a discrete joystick driver.
16179 - apps/wireless/ieee802154/i8sak: Adds socket interface support. You
16180 can now use both socket or char driver to control the MAC layer.
16182 - apps/wireless/ieee802154/i8sak: Adds sniffer port option and a few
16184 - apps/wireless/ieee802154/i8sak: Changes 'notif' to 'primitive'
16185 corresponding to the changes in the Kernel. From Anthony Merlino.
16186 - apps/wireless/ieee802154/i8sak: Channel setting is now saved
16190 - apps/wireless/ieee802154/i8sak: Adds ability to get/set rxonidle
16192 - apps/wireless/ieee802154/i8shark: Adds i8shark, a sniffer "adapter"
16194 packet, and sends it to a host running Wireshark From Anthony
16199 - apps/system/ping and ping6: This commit removes the ping and ping6
16201 apps/system/ping6 built-in commands. The NSH ping[6] commands had
16202 to be removed because they violated the portable POSIX OS interface.
16203 The apps/system/png and ping6 command uses the sem-standard
16206 * Platform-Specific Support (apps/platform)
16214 - Task Environment Creation: Fix an error in the duplication of the
16219 when a child task attempts to create its environment and inherit the
16220 zero-size partent environment. Noted by Anthony Merlino.
16221 - timer_create(): Fix watchdog resource leak if cannot allocate a new
16223 - OS Internal Functions: Internal OS functions should not return error
16226 is too long to duplicate here (please refer to the ChangeLog for
16228 - OS Internal Functions: Not only should internal OS functions not
16231 The list is too long to duplicate here (please refer to the
16233 - OS Internal Functions: Create OS internal versions of many
16239 to list here (see the ChangeLog for details).
16240 - Task Exit: task_exithook.c fails to link if signals are disabled
16241 because was unconditionally trying to send the SIGCHLD signal to the
16243 - memalign(): Fix heap corruption caused by using unaligned chunk
16245 corruptions when nodes are shrink further (for example, 24 bytes ->
16247 - SMP: In sched/sched/sched_cpuselect.c, in order to find the cpu
16248 with the lowest priority thread, we have to remember the already
16250 - spinlocks: Disable local interrupts in spin_setbit() and
16251 spin_clrbit() in order to avoid a deadlock condition. From Masayuki
16253 - atexit()/on_exit(): Clear atexit()/on_exit() function pointer
16260 - tmpfs: Fixed directory unlocking in tmpfs_opendir. From Dmitriy
16262 - fcntl(): fcntl() did not return success fail for F_SETFL. Reported
16264 - tcdrain(): tcdrain() was recently added to the NuttX C library.
16266 that it be a cancellation point. In order to do this, tcdrain was
16268 point hooks were added. In non-FLAT builds, access via system calls
16270 - FS FAT: Fix hard-fault when listing contents of FAT root. From
16272 - procfs: Correct a problem that was causing an apparent directory to
16277 The logic was detecting that fs was the name of the enty to report,
16282 - procfs: Fix uptime being clse to maximum 32-bit value in certain
16283 config. From Juha Niskanen.
16287 - binfmt/: Don't schedule starthook if there are no constructors.
16291 - LCD: ILI9341 initialize method not permitted to set errno.
16295 - Networking: net/netdev/netdev_ifconfig.c: Was not returning all of
16297 - Networking: In some cases, packets are still not sent behind the
16298 router. I found that NuttX sends the ARP requests not to the router
16299 but to the target. Mistake in file net/route/netdev_router.c. From
16301 - SIOCGIFCONF and SIOCGLIFCONF IOCTL commands should only report on
16303 - recvfrom(): Fix double leave_cancellation_point on error path.
16305 - send(): Verify that sock descriptor is valid. Fixes assertion when
16307 - sendto(): Remove assert check for null psock and buf input
16311 -EINVAL instead of assert). From Jussi Kivilinna.
16312 - sockgetname() files need to include udp/udp.h and tcp/tcp.h or
16315 - dup()/dup2(): There was a reference counting problem in the TPC
16319 (because the underlying TCP connection) then net_clone() must back
16323 - close(): There was a possible recursion that could eventually
16327 a call to psock_send_eventhandler() with TCP_CLOSE flag set which
16331 Solution is also similar to a solution proposed by Pascal Speck.
16332 - inet: Add check for protocol before handing out TCP and UDP sockets.
16333 - IP Forwarding: Fixes typo that caused build error when IP
16336 - IP Forwarding: Do not add link layer header size to d_len inside
16338 - TCP Networking: When CONFIG_NET_TCP_WRITE_BUFF=y there is a
16340 configuration, the TCP connection's 'semi-permanent' callback,
16342 in tcp_lost_connection() attempt to use that callback reference
16346 - UDP Broadcat: Fix some issues with regard to UDP broadcast
16348 - ICMP: Fix an error in the poll logic. It was assumed that the
16352 - ICMPv6: Fixes several errors preventing icmpv6_radvertise.c from
16353 being compiled. Fixes conversions to network byte order (namely
16354 vlifetime, plifetime, mtu). IPv6 source address is set to
16355 link-local IP address instead of the address in the netdev
16356 structure. This is in compliance to RFC 4861. RA didn't work on
16359 structure. This seems to make more sense than using a predefined,
16360 separate prefix from the config. From Sakari Kapanen.
16361 - ICMPV6: icmpv6_input() needs to set d_len to 0 after consuming echo
16363 - ICMPV6: Fix an error in the poll logic. It was assumed that the
16367 - IGMPv2 Send: Fix incoming IGMP checksum calculation. From Louis
16369 - ARP: Fix IGMP Ethernet address computation. From Louis Mayencourt.
16373 - CC1101: CC1101 driver not permitted to set errno.
16374 - 6LoWPAN: Correct an error in uncompressing multicast address.
16375 - 6LoWPAN: Correct a bug in handling uncompressed frames (IPv6
16376 dispatch). Adds a separate local variable, protosize, to keep track
16378 - 6LoWPAN: Fix an endian-ness problem in 6LoWPAN address
16380 - 6LoWPAN: The logic that extracts interface identifier from the IP
16381 address needs to be generalized to handle cases where the address is
16386 - Serial: 16550 UART driver IOCTL method must not set errno; it must
16388 - LIS3DSH: Added the argument parameter (FAR void *arg) to the
16389 interrupt handler provided by the LIS3DSH driver to fit the
16391 availability in lis3dsh interrupt handler to use work_available()
16393 - LIS2DH: Fixes for self-test. From Jussi Kivilinna.
16394 - LIS2DH: Fix use of obsolete dbg macro. From Jussi Kivilinna.
16395 - LIS331DL: LIS331DL driver not permitted to set errno.
16396 - HTS221: Power-on sensor for loading calibration data. From Jussi
16398 - MCP2515: Fix the MCP2515 Bit Rate Prescale calculation. Fix BRP
16400 - STMPE811: Fix GPIO operation of STMPE811 driver.
16402 redefined to be the pin direction mask for `stmpe811_gpioconfig`.
16403 I decided to change register name to be STMPE811_GPIO_DIR_REG, and
16408 3. The call to `stmpe811_gpiowrite` from inside of
16409 `stmpe811_gpioconfig` leaded to deadlock.
16411 - BQ2429X: Add BATIO_OPRTN_SYSON for enabling BATFET after SYSOFF.
16416 - Simulation: Serial and console drivers are not permitted to set
16419 * ARMv7-M:
16421 - ARM Stack Check: Fix assert panic when both TLS and interrupt stack
16426 - XMC4 USIC: Kconfig was not selecting XMC4_USIC for USIC1. From Alan
16428 - XMC4 UART: Fix XMC4xxx USIC UART sginal to be high level when in idle.
16430 - XMC4 UART:xmc4_uart_configure() expects the channel# not uartbase as
16432 - XMC4 UART: Enable RX/TX status. From Alan Carvalho de Assis.
16433 - XMC4 UART: The Alternative Receive Interrupt was not being
16438 - XMC4500-Relax: Setup max. freq. 120MHz and setup pull-up to UART
16443 - SAMv7: DAC and ADC drivers are not permitted to set the errno.
16444 - SAMv7: Correct an error in RX DMA setup. From Manish Kumar Sharma.
16445 - SAMv7 USB: It is necessary to disable pre-emption and interrupts
16446 around a loop that copies TX data into the hardware in order to
16451 - LPC31xx: Serial and console drivers are not permitted to set
16456 - lpc43xx: lpc43_adc.c was being selected by the build system wehn
16461 - LPC43xx Ethernet: Fix some backward logic setting full-duplex and
16464 - lpc43xx: UART_RX pins should be configured with input buffers
16469 - STM32 F2: Fixed build for STM32F20XX platforms when
16471 - STM32 F4: Remove ltdc.h and dma2d.h. Those header files in that
16477 - STM32 L4: Build stm32l4_idle.c only if CONFIG_ARCH_IDLE_CUSTOM is
16479 - STM32 F7: Remove ltdc.h and dma2d.h. Those header files in that
16489 - STM32: DAC and ADC drivers are not permitted to set the errno.
16490 - STM32 ADC: Clear pending interrupts. From Mateusz Szafoni.
16491 - STM32 CAN: Lower part of STM32 CAN driver
16498 pretends to be "file like" I expect data to be read from fd the same
16499 order it is written. So I consider described behaviour to be a bug.
16502 - STM32 HRTIM: Fix pclk calculation. From Mateusz Szafoni.
16503 - STM32 HRTIM: Fix burst mode prescaler update. From Mateusz Szafoni.
16504 - STM32 (alt) I2C: Ensure proper error handling. Injecting data
16505 errors would cause the driver to continually reenter the isr with
16506 BERR an RxNE. This fix allows the error to be cleared and
16507 propagated to the waiting task. From David Sidrane.
16508 - STM32: LTDC and DMA2D drivers are not permitted to set the errno.
16509 - STM32 RTC: Workaround for potential subseconds race condition. In
16511 to lock the values in the higher-order calendar shadow registers
16518 updated. This can result in a non-consistency of the three
16521 - STM32 Serial: Do not stop processing input in SW flow-control
16523 - STM32F33xxx ADC: Add some publicly visable interfaces and some
16524 code to support injected channels. From Mateusz Szafoni.
16525 - STM32F33xxx DMA: Add public interface to handle with DMA
16527 - STM32F33xxx RCC: Fix CAN clock enable. From Mateusz Szafoni.
16528 - stm32 F4 I2C: Ensure proper interrupt handling. Injecting data
16529 errors that causes a STOP to be perceived by the driver, will
16530 continually re-enter the isr with SB not set and BTF and RxNE set.
16531 This changes allows the interrupts to be cleared and propagates a
16532 I2C_SR1_TIMEOUT to the waiting task. From David Sidrane.
16533 - STM32 L4 Serial: Do not stop processing input in SW flow-control
16535 - STM32 F7: LTDC and DMA2D drivers are not permitted to set the errno.
16536 - STM32 L4: DAC and ADC drivers are not permitted to set the errno.
16537 - STM32 L4 DAC: Do not configure output pin if it is not used. From
16539 - STM32 L4 RTC, PM: Small fixes to subseconds handling, ADC
16540 power-management hooks
16541 - STM32 F4 RTC: Fix reading alarm value that is more than 24h in
16543 - STM32 L4 RTC: Fix reading alarm value that is more than 24h in
16545 - STM32 L4 TIM: Fix compilation of timers with complementary outputs
16547 - STM32 L4 RCC: Restore backup-registers after backup-domain reset.
16549 - STM32 L4 RTC: Correct RTC_SSR and RTC_TR read ordering. In all
16550 recent STM32 chips reading either RTC_SSR or RTC_TR is supposed to
16551 lock the values in the higher-order calendar shadow registers until
16552 RTC_DR is read. Change the register read ordering to match this and
16556 - STM32 L4 RTC: Init mode was never exited because nested locking in
16558 - STM32 L4 RTC: Use backup register magic value instead of INITS
16559 bit. The INITS (bit 4) of RTC_ISR register cannot be used to
16563 set. Hardware also clears the bit when RTC date is set back to year
16565 - STM32 L4 RTC: Put back the SSR race condition workaround. ST has
16566 confirmed that the issue has not been fixed, and that it applies to
16567 STM32 L4 too (was not in errata sheets due to documentation bug) See
16568 discussion: https://community.st.com/thread/43710-issue-with-rtc-maximum-time-resolution .
16570 - STM32 F7 BBSRAM: Avoid assert in stm32_bbsram_savepanic. If panic
16574 - STM32 F7 I2C: fix I2C_M_NORESTART handling. From Jussi Kivilinna.
16575 - STM32 F7 I2C: Restore bus frequency after I2C reset. Copy
16576 frequency restoration fix from STM32L4 I2C driver to STM32F7 I2C
16578 - STM32 F7 RTC: Fix reading alarm value that is more than 24h in
16583 - STM32F334-DISCO: Add missing ram_vectors configuration in linker
16585 - Nucleo-F334R8: Add missing ram_vectors configuration in linker
16587 - Nucleo-F334R8: Add Missing ADC trigger configuration tot he highpri
16589 - STM3240G-EVAL: The timer frequencies (BOARD_TIMx_FREQUENCY) are
16590 incorrectly defined in�board.h. Since the APB prescalers are set to
16594 - STM32F429i-DISCO: The ltdc configuration has been deleted because
16601 - configs/z80sim and xtrs: Serial driver lower halfs ioctl methods
16603 - z80 Make.defs: Fixes dependency generation with newest SDCC
16605 - configs/z80sim: Fix a naming problem. Also, don't try to build the
16607 - Z80: Makefile fix for use with current SDCC.
16611 - configs/: All defconfig filess that include
16612 CONFIG_NET_ICMPv6_SOCKET=y need to select CONFIG_SYSTEM_PING6=y and
16614 - configs/: All NX configuration... Because of recent changes to
16616 for NXFONTs too and need to match the select BPP for NX.
16617 - Build system: Fix CONFIG_BUILD_KERNEL logic directories that have
16624 - libc/stdio: Build the lib_noflush() and lib_snoflush() stubs even
16626 - libc and libnx: When the libraries are built into two libraries, a
16632 - libc/match: Use of exp() vs expf() in logf() caused function to be
16634 - libnx: Fixes a memory leak that is caused because the client message
16637 - sscanf(): Fix sscanf() character conversion (%c): do not add '\0' at
16645 - tools/: configure.sh and configure.c should redirect stdout to
16650 - apps/nshlib/: Avoid truncating the strcmp result in the parser
16653 - apps/nshlib/: Fix resouce leak in 'dd' commenad when 'if=' or
16657 - apps/nshlib: This commit eliminates the ping and ping6 commands
16658 from NSH and replaces them with 'built-in' commands at
16660 commands violated the portable POSIX interface and, hence, had to
16661 be removed. The new system/ping and ping6 built-in commands uses
16663 sockets to implement ping.
16664 - apps/nshlib: Fix parsing of empty strings when CONFIG_NSH_CMDPARMS
16669 - All configurations that use NXIMAGE or NXHELLO must select
16672 - All configurations that use NXLINES must select NX_MULTIUSER. All
16673 configurations that use the NX server need to have larger POSIX
16675 - apps/examples/adc: Fix g_adcstate.count initialization. From
16677 - apps/examples/elf: Remove low-level interfaces and replace with
16678 call to exec().
16679 - apps/examples/nxflat: Remove low-level interfaces and replace with
16680 call to exec().
16681 - examples/ostest: Works around a bug in printf() when cancellation
16683 calls write(). This is correct according to OpenGroup.org.
16687 - apps/examples/nx: The NX example no longer supports single user
16689 - apps/examples/nxtext: The nxtext example no longer supports single
16691 - apps/examples/nxhello now supports only multiuser mode.
16692 - apps/examples/nximage now supports only multiuser mode.
16693 - examples/nxlines: Now supports only multiuser mode.
16697 - apps/netutils/ftpc: Fix some crazy comparisons to determine is a
16702 - apps/system/i2ctool: Fixed i2ctool write operation in `no restart`
16703 mode (flag `-n`). It seems that I2C driver has changed a bit since
16705 `no restart` flag (-n) was passed to it. From Dmitriy Linikov.
16707 NuttX-7.24 Release Notes
16708 ------------------------
16712 that release consists of two tarballs: nuttx-7.24.tar.gz and
16713 apps-7.24.tar.gz. These are available from:
16718 Both may be needed (see the top-level nuttx/README.txt file for build
16725 - SMP: Introduce spin_lock_irqsave() and spin_unlock_irqrestore().
16727 and leave_critical_section() to protect data (e.g. registers) in
16730 - System Timer: Replace critical section APIs with spinlock APIs.
16734 - POSIX Timers: Replace critical section APIs with spin lock APIs in
16736 systems but nothing changes for non-SMP systems. In SMP mode,
16739 - SMP: Introduce spin_lock_wo_note() and spin_unlock_wo_note(). These
16740 APIs are used in sched_note.c to protect instrumentation data. The
16741 difference between these APIs to exsiting spin_lock() and
16742 spin_unlock() is that they do not perform instrumentation to avoid
16745 - Interrupts: Add a configuration option to show interrupt
16750 - VFS: Add support for truncate() and ftruncate().
16751 - FAT, SmartFS, UserFS, UnionFS, TmpFS, NFS: Add truncate() support.
16752 - FAT. Effectively handles the situation when a new file position is
16754 multitude of operations to write small pieces of data within the
16759 - HiletGo OLED: Add configuration support for HiletGo SSD1306 OLED.
16760 - lcd/ft80x: This commit adds an FTDI/BridgeTek FT80x GUI driver. It
16766 - 6LoWPAN: Adds configuration options for specifying preloaded
16768 - TCP: Introduce tcp receive window control based on I/O buffer.
16771 - UDP: Add an implementation of UDP write buffering.
16772 - Routing Tables: Adding ftruncate() support eliminates an issue
16773 in file-based routing table management system.
16774 - Telnet: Add support for Telnet character mode From Masayuki
16779 - drivers/input/ft5x06.c: Add a driver for the FT5x06 capacitive,
16780 multi-touch, touchscreen controller.
16781 - drivers/input/ft5x06: Add a polled mode of operation for the FT5x06
16782 in attempt to work around the fact that the LPCXpresso-LPC54628
16783 chose a non-interrupt pin for the FT5x06 interrupt. Driver is still
16785 - drivers/power/bq2429x.c: Add trickle charging mode From Juha
16787 - drivers/sensors: Add support to MAX44009 ambient light sensor.
16789 - drivers/sensors: Added support for LIS3DH accelerometer sensor.
16791 - drivers/eeprom: EEPROM driver for AT24xx compatible EEPROMs.
16796 - sim: Add support for a RAM MTD driver and initialization for use
16798 - sim: Add support for testing NXFFS.
16802 - ARMv7-A, ARMv7-R, ARMv7-M: Add atomic read-add-write and
16803 read-subtract-write functions.
16807 - XMC4xxx: Refactor PLL setup, refactored PLL/CLK config, easier,
16809 config of EXTCLK output freq. From David Alessio.
16813 - Add FPU to xmc4 ostest. Remove +x from makefiles, preserve
16814 .gdbinit across make clean, add FPU support to ostest on xmc4,
16815 add FPU test to ostest on xmc4 From David Alessio.
16819 - SAMD: SAMD External Interrupt Controller (EIC) support From Matt
16821 - SAMD/L: Added Analog Comparator basic initialization From Matt
16823 - SAMD/L: Added FDPLL clock support. Fixed sequence of OSC32K
16825 - SAMD/L: Added loading factory USB calibration data from NVRAM.
16827 - SAMD/L: Added experimental DMA support to SPI driver. spi_exchange()
16832 - Flip&Click SAM3X: Add board support for the Mikroe Flip&Click
16834 - Flip&Click SAM3X: Adds basic board support for the HiletGo OLED.
16838 - PIC32MZEF: Add architectural support for the PIC32MZEF family.
16842 - Flip&Click PIC32MZ: Adds board support for the Mikroe Flip&Click
16844 - Flip&Click PIC32MZ: Add board support for HiletGo OLED.
16845 - Flip&Click PIC32MZ: Add an nxlines configuration for use in
16850 - LPC43xx: Adapt LPC176x RTC driver for the LPC43xx. From Gintaras
16852 - LPC43xx: Add Windowed Watchdog Timer (WWDT) driver. Tested on
16855 - Leverage the LPC54xx SD/MMC back to the LPC43xx (where it came from
16860 - Bambino-200e: Add LPC43 SDMMC board support to Bambino-200E. From
16865 - LPC546xx: Added basic architectural support for the LPC546xx
16870 - LPC546xx: Basic NSH configuration includes support for UARTs,
16872 - LPC546xx: Additional drivers include EMC, I2C, Ethernet
16873 - LPC546xx: Implement GPIO interrupt support.
16874 - LPC546xx: And unverified SPI driver is included.
16875 - LPC546xx: Ported LPC1788 LCD driver to use the LPC54xx pin.
16876 - LPC546xx: Bring in LPC43xx SD/MMC driver from
16877 https://github.com/Smoothieware/smoothie-nuttx/tree/master/nuttx/arch/arm/src/lpc43xx
16879 - LPC546xx: Add DMA driver ported from the LPC43xx GPDMA driver.
16880 - LPC546xx: Bring in WWDT driver from LPC43.
16881 - LPC546xx: Add an RTC driver and a RTC character driver lower half.
16882 - LPC546xx: Add support for a random number generator.
16883 - LPC546xx: Add an Ethernet driver.
16887 - LCXpresso-LPC54628: Added support for the LPCXpresso-LPC54628
16888 board. The initial bring-up used a basic NSH port.
16889 - LCXpresso-LPC54628: On-board SDRAM is also supported
16890 - LCXpresso-LPC54628: Add support for I2C2 and for the I2C tool to
16892 - LCXpresso-LPC54628: Add support for the USER button. Enable the
16894 - LCXpresso-LPC54628: Add the fb configuration for testing the LCD.
16895 - LCXpresso-LPC54628: Add support for the the FT5x06 touchscreen
16898 - LCXpresso-LPC54628: Add an NxWM configuration.
16899 - LCXpresso-LPC54628: Add logic to bring up SDMMC.
16900 - LCXpresso-LPC54628: Add logic to register the RTC character driver
16903 - LCXpresso-LPC54628: Add a netnsh configuration that was be used to
16905 - LCXpresso-LPC54628: Add LittlevGL graphics demo configuration.
16909 - LC823450 SMP improvements: (1) Apply irq_spin APIs to
16910 modifyregXX, (2) Do not use modifyreg32() to enable Mutex, (3)
16911 Modify IRQ control for i2s. Apply irq_spin APIs to
16913 - LC823450: LC823450 http streaming improvements: (1) Use spinlock
16919 - LC823450: Introduce DVFS. This version only supports manual mode
16920 and Vdd1 is fixed to 1.2V. From Masayuki Ishikawa.
16924 - LC823450: Refactor timer driver. Add MTM timer APIs for DVFS.
16932 - LC823450-XGEVK: I2S interrupt will be handled on CPU0 with this
16933 change. Assign CPU1 to lpwork. This change will improve load
16935 - LC823450-XGEVK: Enable SPINLOCK_IRQ and NXPLAYER in rndis. From
16937 - LC823450-XGEVK: LC823450 http streaming improvements: (1) In SMP
16938 mode, H/W interrupts should be handled on CPU0 to avoid deadlocks.
16939 (2) Call up_enable_irq() to assign CPU0 for IRQ handling. (3)
16943 - LC823450-XGEVK: Enable DVFS in lc823450_bringup.c. Enable DVFS
16944 in audio and rndis. Add Telnet character mode to rndis. From
16946 - LC823450-XGEVK: Explicitly assign I2S IRQ handling to CPU0. From
16948 - LC823450-XGEVK: Enable RTC_HIRES instead of RTC_DATETIME (audio/
16954 - STM32 F7: Add support for the STM32F72x/73x family. From Bob
16959 - STM32 HRTIM: Add interface to change outputs SET/RST configuration.
16961 - STM32 HRTIM: Add interface to get timer clock frequency,
16964 - STM32 HRTIM: Add interface to set timer frequency, fix slave timers
16965 reset configuration, change POWER_INFO to TIMER_INFO From Mateusz
16967 - STM32 HRTIM: Add repetition support and fix enum overflow From
16969 - STM32 HRTIM: Add HRTIM push-pull mode configuration. From
16971 - STM32 FLASH: Add progmem support for STM32L15XX From Juha Niskanen.
16975 - configs/photon: Adds BOARD_TIMn_FREQUENCY macros From Anthony
16977 - configs/indium-f7: Adds support for the RAF Research Indium-F7
16979 - Rename the configs/stm32f0discovery board directory to
16980 configs/stm32f051-discovery. There are others stm32f0discovery
16983 - configs/stm32f072b-discovery: Adds support for stm32f072b-disco
16986 - configs/stm32f103-minimum: Add AT24 EEPROM support on STM32F103-
16988 - configs/stm32f103-minimum: Add support to BMP180 on BluePill
16989 (stm32f103-minimum) board. From Alan Carvalho de Assis.
16990 - configs/stm32f334-disco: Add buck converter and boost converter
16992 - configs/stm32f103-minimum: Add zerocross support to STM32F103-
16994 - configs/stm32f103-minimum: Add OLED SSD1306 support to
16995 STM332F103-Minimum From Alan Carvalho de Assis.
16996 - configs/stm32f103-minimum: Add board support to MAX6675 Thermocouple
16998 - configs/stm32f746g-disco: Add stm32f746g-disco Ethernet configuration.
16999 Add USART1 support (connected to the USB virtual serial port) From
17001 - configs/viewtool-stm32f107: Add support for FT80X initialization.
17007 - tools/logparser: Add a tool which will help me to convert git logs
17008 to ChangeLog format.
17012 - apps/nshlib: Add support for a truncate command. This will be used
17013 to test the new ftruncate file system support.
17014 - apps/nshlib: Add support for Telnet character mode. From Masayuki
17016 - apps/nshlib: Add support for '-n' option to the echo command. From
17018 - apps/nshlib: Add irqinfo command.
17022 - apps/examples/userfs: Add truncate() support for userfs.
17023 - apps/examples/lvgldemo: Add lvgldemo example for LittlevGL.
17024 - apps/examples/veml6070: Add VEML6070 Application Example. From
17026 - apps/examples/bmp180: Add BMP180 application example. From Alan
17028 - apps/examples/ft80x: Add a test of the FT80x based on FTDI
17029 SampleApp. Includes tests of GPU primitives and graphics co-
17034 - apps/netutils/netlib: Add default route in netlib_set_dripv4addr().
17039 - apps/graphics/littlevgl: Add littlevgl library. From Alan Carvalho
17041 - apps/graphics/ft80x: Add the FTDU FT80x GUI support library.
17047 - apps/system/nxplayer: Add support for HTTP streaming in nxplayer.
17049 - apps/system/setlogmask: Adds 'setlogmask' application that allows
17050 you to set the syslog priority via a simple command. From Anthony
17052 - apps/system/usbmsc: Added Kconfig options to configure write
17054 - system/stackmonitor: Re-design the stack monitor so that it does not
17056 OS interface. It now properly uses the PROCFS file system to glean
17065 - System Timer: Change the way that the 64-bit time is sampled.
17066 Previously, we disabled interrupts before sampling the 64-bit
17071 from timer rollover. To work around this, logic was added that
17072 samples 64-bit timer is sampled twice and if 32-bit rollover was
17074 - POSIX Timers: In SMP mode, running TCB is not always at the head of
17075 the g_readytorun list. This change removes DEBUGASSERT() to avoid
17077 - Spinlocks: Add memory barrier operations in spin_unlock(). In ARM
17079 changing a spinlock state to SP_UNLOCKED. However, we found that
17080 SP_DSB() is also needed to ensure that spin_unlock() works
17082 - Sporadic Scheduler: Fix compiler error in Sporadic Scheduler when
17084 - Priority Inheritance: Fix some priority inheritance related issues
17086 - boardctl: Remove the BOARDIOC_TSCTEST_TEARDOWN and
17089 the touchscreen controller as a normal part of its board bring-up.
17091 like any other on-board device.
17092 - configs: CONFIG_MAX_TASKS must be a power of 2.
17093 - SMP: Introduce a new global IRQ clearing logic and tasklist
17096 early. As a result, nxsem_post() would have a chance to enter the
17099 sched_addreadytorun() and sched_removereadytorun() to
17100 sched_resumescheduler() to ensure that nxsem_post() can enter the
17103 In addition, by this change, task_exit() had to be modified so that
17107 sched_cpu_select() during HTTP streaming aging test on LC823450-XGEVK.
17111 To avoid this, I introduced tasklist protection APIs. With these
17114 - SMP: Fix this_task() to be an atomic operation. In the previous
17122 - SMP: Implements a global scheduler lock capability as part of SMP
17123 support. This allows the scheduler to be locked with no knowledge
17124 or access to the TCB of the currently running task. This is
17126 is, itself, a non-atomic operation. This global scheduler lock
17127 capability was add just to support that atomic access to the TCB.
17128 - SMP: Extend the last global lock change to work with the
17129 LC823450-XGEVK which does not support the atomic fetch add but
17133 - SMP: Fix a infinite recursion problems that a recent changes
17135 with the LC823450 because you can disable inter-processor interrupts
17136 in that architecture; but you cannot in the ARMv7-A/GIC architecture.
17137 - SMP: Remove SMP related logic in sig_dispatch.c. This change
17138 prevents from a deadlock in up_schedulesigaction.c where inter-CPU
17139 signal handling is actually implemented. arch/arm/src/armv7-m: Fix
17141 for SMP was incorrect. Thus, for example, if an inter-CPU signal
17143 change fixes the issues and works for both inter-CPU signal handling
17145 - Tasking: Add nxtask_create(). Kthread_create() and nxtask_create()
17147 Convert legitimate uses of task_create() to nxtask_create().
17150 - Tasking: Threads started by board bring-up logic should be kernel
17152 - Tasking: Threads started by drivers should be kernel threads, not
17154 - Semaphore Usage: Added ECANCELED condition to DEBUGASSERT's
17157 - errno: Add new internal OS function nxsched_setaffinity() that is
17158 identical to sched_isetaffinity() except that it does not modify the
17161 - errno: Internal functions sched_reprioritize() and
17163 to nxsched_reprioritize() and sched_setpriority().
17164 - errno: Add new internal OS function nxsched_getscheduler() that is
17165 identical to sched_getscheduler() except that it does not modify the
17168 - errno: Add new internal OS function nxsched_setparam() that is
17169 identical to sched_setparam() except that it does not modify the
17172 - errno: Add new internal OS function nxsched_getparam() that is
17173 identical to sched_getparam() except that it does not modify the
17174 errno value (actually, the previous value erroneously neglected to
17175 set the errno value to begin with, but this fixes both issues). All
17178 - errno: wd_start() is an internal OS function and should not set the
17179 errno value. Reviewed and updated every call to wd_start() to
17182 - errno: Fix several inappropriate accesses to get_errno() that were
17183 missed in previous changes (some going back to nuttx-7.23). Add new
17185 equivalent to their counterparts without the nx on front. These
17187 the OS to use these newer versions of the functions.
17188 - errno: binfmt/, configs/, grahics/, libc/, mm/, net/, sched/: OS
17189 references to the errno variable should always use the set_errno(),
17191 - drivers/, fs/ and libc/: OS references to the errno variable should
17196 - FAT: CONFIG_FAT_MAXFNAME may not exceed NAME_MAX (CONFIG_NAME_MAX)
17197 - NFS: Correctly infer file type. The file type is in struct
17200 - NFS: Fix buffer corruption. In case multiple read requests to the
17201 NFS server are required to fill up the user provided buffer,
17204 - VFS: reopen() should return NULL when oflags is less than 0, not
17205 equal to 0. Because negative value is returned on failure of
17208 - ProcFS: Fix an error in a common function that manages read data.
17209 - drivers/mmcsd: Respect SDIO_CAPS_DMABEFOREWRITE on CMD25. From
17211 - AT24xx: Correct page size for AT24C02 part. From Alexander
17213 - mtd_config.c: Add still more error handling (to detect bad
17216 revert of 4f18b4. Reported-by: Pascal Speck <iktek01@yahoo.com>
17220 - drivers/lcd: Fix the default I2C address of SSD1306 OLED display
17221 (7- vs 8-bit addressing) From Alan Carvalho de Assis.
17222 - drivers/lcd: lcd_framebuffer.c does not need to include board-
17224 - include/lcd: Eliminate a warning from an SSD1306 header file by
17225 adding a forward reference to struct i2c_master_s. From Sebastien
17230 - ARP: Fix an error introduced when ICMP and ICMP6 socket support was
17231 added in NuttX-7.3. A gratuitous ARP (or solicitation) was being
17233 - ARP: Fix IGMP multicast address computation on Nuttx network stack.
17234 This change fixes the IGMP address computation to allow multicast
17236 bytes of the given IPv4 address. From Louis Mayencourt.
17237 - ioctl: The existence of the network driver ioctl() method should
17241 - TCP: Write buffering logic should not wait for a free buffer if
17242 the socket was opened non-blocking.
17243 - TCP: Fixed bad return value handling in psock_tcp_send(). send()
17244 expects psock_tcp_send() to return a negated errno value, not -1
17248 - TCP: Fixes hardfault when network goes done and network monitoring
17250 - TCP: tcp_send_[un]buffered.c: Check routing table in
17254 - TCP: Generalize Juho Grundstrom's IPv4 change for IPv6 as well.
17255 - UDP: Remove some conditional logic that was true if there is only a
17256 single network device, but not true in the multi-device context.
17257 - UDP: In sendto(), return EHOSTUNREACH if the network is down.
17261 - drivers/pipes: In poll logic, fix off-by-one error in calculation
17263 off-by-one when read index is larger than write index. This causes
17266 - drivers/audio: Improve stability of the WM8776 driver in SMP mode.
17267 Apply irq_spin APIs to improve performance. Repeat to process a
17268 message to avoid deadlock. From Masayuki Ishikawa.
17269 - drivers/ioexpander: Fixed build of PCF8574 driver when its
17270 interrupts aren't enabled by config. From Dmitriy Linikov.
17271 - drivers/syslog: Fixes LOG_UPTO macro to include specified log level.
17273 - drivers/sensors: Fix HTS221 sensor reset with BOOT bit From Jussi
17275 - drivers/loop: If we want to open read-only in losetup.c, flags
17277 - drivers/timers/ds3231.c: Correct some debug statements. From
17279 - drivers/sensors/lis2dh: Use realtime clock if monotonic is not
17281 - drivers/i2c and drivers/spi: Fix compile error if
17285 * ARMv7-A:
17287 - Data Cache: Fix cp15_invalidate_dcache. In cases where more than
17288 one dcache line was to be invalidated, a missing branch label
17292 - SMP: Port the signal-related SMP change by Masayuki Ishikawa to the
17293 ARMv7-A family.
17297 - SMP: Port the signal-related SMP change by Masayuki Ishikawa to the
17302 - XMC4xxx: Only setup USB clock when USB PLL is enabled From Alan
17304 - XMC4xxx: Fix USIC_BRG_SCLKCFG definition From Alan Carvalho
17309 - MIPS32: In up_idle, the kludge that was conditionally enabled if
17310 the work queue was enable appears to be needed even when he work
17312 - PIC32MZ: Fix some typos in debug instrumentation in pic32mz-gpio.c;
17313 fix some typos related to UART5 configuration in pic32mz-serial.c.
17317 - SPI: In sam_spibus_initialize(), the pinmux configuration was
17320 - SPI: Fixes g_spi2ops and g_spi2dev using incorrect values From Matt
17322 - SPI: SPI must be disabled before changing the mode bits in CTRLA
17324 - DMA: Fix DMA controller support. From Matt Thompson.
17328 - LPC17xx: Disable LPC17 FDR when not used. If a boot loader set the
17335 - Kinetis: Correct some Ethernet PHY register bit tests for the
17340 - arch/arm/src/LC823450: Add SP_DMB() into lc823450_testset.c.
17348 - STM32 F3 RCC: A flash wait state configuration. Flash latency must
17349 be fixed according to sysclk frequency. If this operation is not
17350 done or done after PLL configuration, the STM32 fail to continue
17351 boot operation if the frequency if greater than 24MHz according to
17352 the board variable STM32_SYSCLK_FREQUENCY. Tested on stm32f334-disco
17353 board. From Gwenhael Goavec-Merou.
17354 - STM32 RTC: Make STM32 usable with an external RTC.
17355 - STM32 SPI: Removed unnecessary (and incorrect) speed limitation.
17357 - STM32 SPI: I have a SPI bus with both Mode 0 and Mode 3 devices
17358 on it. After performing SPI I/O to a Mode 0 device, switching to a
17360 …read. I traced the reason for the lock-up to arm/arm/src/stm32f7/stm32_spi.c function spi_setmode…
17366 - STM32 and STM32 F7: Remove confusing, redundant, and misleading
17371 used to access BKP registers on F2, F3, and F4.
17372 - STM32 and STM32 F7: Architecture-specific code is not permitted to
17374 - STM32 F4 I2C: Correct some recent changes to STM32F4 I2C that broke
17376 - STM32 F4 I2C: Corrections to STM32 F4 I2C to restore functionality.
17378 - STM32 F4 I2C: Corrections to STM32 F4 I2C to fix the NORESTART
17380 - STM32 F7: Fixes a bug in multi-block SD-card operations on the
17381 STM32F7 platform. DBLOCKSIZE must be the size of SD-card block, not
17383 - STM32 F7: Fix undefined variable when using USART1 for other
17385 - STM32 F7: Backport RTC alarm setting changes from STM32L4. Most
17387 used. Root cause was writing RTC ISR register contents to RTC CR
17389 - STM32 L4 Flash: Change flash programming to use page buffer for
17394 - Nucleo-L432KC: Fix some bogus logic noted by Fanda.
17395 - configs/nucleo-* and configs/stm32l476vg-disco: Fix more
17397 - Nucleo-L432KC: Fixed nucleo-l432kc broken build when
17399 - Nucleo-L432KC: Issue #85: /dev/userleds is not working for
17400 Nucleo-L432KC fixed From Fanda Vacek.
17401 - STM32F429I-Disco: Separate SPI4 from MTD init. I was trying to
17402 attach a non-MTD peripheral to an STM32F429I Discovery Board's SPI4
17407 - STM32F103-Minimum: Remove CONFIG_NX_LCDDRIVER dependence from
17412 - libc/stdio: In dtoa(), up_interrupt_context() is used in a debug
17413 assertion. up_interrupt_context() is not available in the user-mode
17416 assertions will result in an undefined reference to
17418 - libc/netdb: Fixed parsing of DNS response packets having compressed
17422 pointer to another part of the packet. This commit fixes parsing of
17423 such packets. Also I added checks to keep parsing only in bounds of
17428 - tools/*.c: Add #define _GNU_SOURCE to all C files that call
17429 asprintf() to eliminate a warning.
17430 - tools/cvsparser.c: Add a check to avoid access past the end
17435 - apps/nshlib: Fix compile error when CONFIG_NSH_DISABLESCRIPT is not
17440 - apps/examples/touchscreen: Eliminate BOARDIOC_TSCTEST_SETUP.
17444 - apps/netutils/ftpc: Fix some corner-cases that could cause FTP to
17449 - apps/wireless/ieee802154/i8shark: Fixes special XBee compensation
17452 NuttX-7.25 Release Notes
17453 ------------------------
17457 that release consists of two tarballs: nuttx-7.25.tar.gz and
17458 apps-7.25.tar.gz. These are available from:
17463 Both may be needed (see the top-level nuttx/README.txt file for build
17470 - fs/cromfs: Added CROMFS file system. CROMFS is a commpressed, in-
17471 memory, read-only file system based on LZF.
17472 - fs/vfs: Added support for checking if a descriptor is a socket in
17477 - drivers/lcd: Remove support for the Nokia6100 LCD. That LCD uses a
17478 9-bit SPI interface (the 9th bit being the command/data bit that is
17481 support from the low-level, MCU SPI driver to manage that 9th bit.
17486 - net/tcp: Added support for TCP Keepalive, add SO_KEEPALIVE socket
17487 option. Added socket options needed to manage TCP-keepalive and TCP
17488 state machine logic to detect if that the remote peer is alive.
17489 - net/tcp: In tcp_input(), add the logic to detect, decode, and
17490 respond to TCP Keep-Alive packets.
17491 - net/tcp: Extended support for sending to non-blocking tcp sockets.
17493 - net/bluetooth: Added support for AF_BLUETOOTH sockets.
17494 - drivers/net: Added TAP (network bridge) mode to tun.c. In the
17502 - wireless/ieee802154: Added basic MAC support for RX-ENABLE.request
17504 - wireless/ieee802154: Added MAC ackreq flag to TX descriptor for use by
17508 simply passes the ackreq meta-data flag along to the radio. Also
17510 causing double free call. From Anthony Merlino.
17511 - wireless/bluetooth: Bring in the Bluetooth stack from the Intel/
17512 Zephyr arduino101_firmware_source-v1.tar package.
17513 - drivers/bluetooth: Added re-architected version of the Bluetooth
17514 UART driver from the Intel/Zephyr arduino101_firmware_source-v1.tar
17516 - include/nuttx/wireless: Added a setbaud() method to the HCI UART
17517 lower half interface that can be used to change the default BAUD
17519 - wireless/bluetooth and include/nutt/net: Added support for Bluetooth
17521 - drivers/wireless/bluetooth: Added a NULL device to support some very
17523 - drivers/wireless/cc3000: Eliminate support for the CC3000 wireless
17526 - drivers/wireless/ieee80211: Added BCM43428 support. From hhuysqt.
17530 - drivers/1wire: Added 1-wire subsystem and ds28e17 driver From Juha
17532 - drivers/1wire: Added PM hooks and unlink support to sht21 sensor
17533 (allowing hot-swappable I2C bus from 1-wire converter). Unlike most
17535 allow any I2C operations after unlink, making it possible to
17537 - drivers/i2c: Added support for the pca9540bdp i2cmultiplexer. From
17539 - drivers/power: Added pm_unregister From Juha Niskanen.
17540 - drivers/power: Added generic upper-half motor driver From Mateusz
17542 - drivers/rgbled: Added support for multichannel PWM (multiple PWM
17544 - drivers/sensors: Added support for Sensirion SHT2x humidity sensor.
17546 - drivers/sensors: Added LSM330 SPI and ADXL372 drivers along with the
17547 - drivers/sensors: Added support for INA3221 power sensor. This has a
17550 - drivers/sensors: Added multiple MAX31855 sensors feature support.
17552 - drivers/wireless/cc1101.c: Driver improvements from from lihaichen.
17553 - progmem interface: Discern r/w and erase page sizes. Introduce new
17554 up_progmem_erasesize architecture API to be able to communicate the
17562 - configs/sim: Added a configuration that will support some limited
17567 - ARM: All ARM architectures now support CONFIG_ARCH_IDLE_CUSTOM.
17571 - MIPS: All MIPS architectures now support CONFIG_ARCH_IDLE_CUSTOM.
17575 - XMC4: Added SPI support for Infineon XMC45xx microcontroller. From
17580 - XMC4500-Relax: Added board support for SPI. From Alan Carvalho de
17585 - NRF52: Initial support for the NRF52 including UART, Timer, and
17590 - NRF52: Added watchdog timer drivers. Includes significant
17592 - NRF52: Added nRF52 Flash PROGMEM support From Alan Carvalho de
17597 - configs/nrf52-pca10040: Added support for the NRF52-PCA10040 board
17599 - configs/nrf52-pca10040: Added support for starting the watchdog
17601 - configs/nrf52-pca10040: Added a configuration for testing the
17606 - i.MX RT: Brings in basic support for the i.MX RT 1050 'crossover'
17609 credit to Ivan for the kill because he is the one to held on to
17614 - i.MX RT: Added power management hooks.
17615 - i.MX RT: Added eDMA support (unverified).
17616 - i.MX RT: Added Ethernet driver. From Jake Choy.
17617 - i.MX RT: Added cache operations to permit the Ethernet driver to
17618 work with the D-Cache enabled, at least in write-through mode.
17623 - IMXRT1050-EVK: Added support for booting from the on board HYPER
17625 - IMXRT1050-EVK: Added logic to support the board's user LED. From
17627 - IMXRT1050-EVK: Added procfs auto-mount support in imxrt_bringup.c.
17629 - IMXRT1050-EVK: Added LIBCXX test configuration.
17630 - IMXRT1050-EVK: Added support for the imxrt1050-evk button. From
17632 - MXRT1050-EVK: Added support for on-board NOR FLASH boot. From
17634 - IMXRT1050-EVK: Disable LED support because pins conflict with PHY.
17640 - K28F: Added architecture support for the Kinetis K28F.
17644 - SDHC: Make Kinetis SDHC pullups work the same as the STM32 SDIO
17649 - Freedom-K28F. Added support for the Kinetis Freedom-K28F board.
17653 - LPC17xx: Added support for ARMv7-M run time stack checking on NXP
17659 - LPC17xx: Added a configurable option to allow using a part of
17666 - Olimex-LPC1766STK: Remove support for the Nokia6100 LCD. That
17667 LCD uses a 9-bit SPI interface (the 9th bit being the command/data
17673 - configs/bambino-200e: Added support for multiple MAX31855 sensors
17674 to the bambino-200e. From Tiago Almeida.
17678 - arch/or1k/src. Added basic architectural support for the OpenRISK
17684 - configs/or1k. OpenRISK mor1kx Qemu simulation. From Matt Thompson.
17688 - STM32: Added support for the STM32F401xB and STM32F401xC families.
17692 - STM32 HRTIM: Added HRTIM software capture trigger, added software
17695 - STM32 ADC: Added ADC injected channels configuration. From Mateusz
17697 - STM32 HCIUART: Added a Bluetooth HCI UART lower half driver for the
17699 - STM32 HCIUART: Implement the setbaud() method for the STM32 HCI
17701 - STM32 SDIO: Added support for SDIO card to SDIO driver. From
17703 - STM32 SDIO: Added internal pull-up option for SDIO pins. From Alan
17705 - STM32 F2/F4 ADC: Added Vbat measurement to ADC driver for
17707 measurement, this change requires user to enable the corresponding
17709 IO_ENABLE_DISABLE_VBAT_CH, and its arg should be a pointer to bool
17710 which must be true to enable and false to disable the Vbat channel.
17711 Moreover, since Vbat input contains a built-in voltage divider, it
17712 is highly suggested to disable Vbat input channel after measurement
17713 is done in order to prevent battery drain through the divider. From
17715 - STM32, STM32L4 1WIRE: Added one bit read and write to 1-wire
17717 timeslot generation and for 1-Wire search algorithm triplets. From
17719 - STM32 F3 SPI: Enable DMA for SPI on stm32f30xxx MCUs. From Michal
17721 - STM32 L4 1WIRE: Ported 1wire driver from STM32. From Juha
17723 - STM32 L4 I2C/SPI/1WIRE: Added PM hooks to I2C, SPI and 1-wire From
17725 - STM32 F7 RTC: Added CONFIG_RTC_PERIODIC support. Also makes the RTC
17727 - STM32 F7 ADC/I2C/SPI: Added PM hooks to ADC, I2C and SPI. From
17732 - Indium-F7: Removed support for the Indium-F7 board. This was done
17734 Nucleo-144 board support with naming changes. There has been no
17736 does not seem to be any available Indium-F7 board available to the
17737 public anywhere on the Internet. There is not even a reference to
17739 - Nucleo-L452RE: Added buttons example From Juha Niskanen.
17740 - Nucleo-L476RG: Added support to Nokia LCD PCD8544 on nucleo-l476rg.
17742 - Nucleo-L476RG: Added nxdemo configuration to nucleo-l476rg using
17744 - Olimex-STM32-P407: Added a zmodem test configuration.
17745 - Olimex-STM32-P407: Added the module configuration.
17746 - Photon: Added RGB led support From Anthony Merlino.
17747 - STM32F103-Minimum: Added support for DFU bootloader From Simon
17749 - Spark: Removes Spark board configuration. Still available in the
17752 - STM32F334-Disco: Added buck/boost converter example configuration.
17754 - STM32F4 Discovery: Added support for multiple MAX31855 sensors to the
17756 - STM32F4 Discovery: Added support in bring-up logic to initialize the
17758 - STM32F4 Discovery: Added MAX7219 support to STM32F4Discovery board.
17760 - STM32F4 Discovery: Added board configuration for CS43L22 audio
17762 - STM32F4 Discovery: Added a module configuration for testing the
17765 - STM32F429I-DISCO: Added a LittlevGL configuration for stm32f429i-
17767 - STM32F746G-DISCO. Added clang support to stm32f746g-disco board.
17769 - STM32L1 Discovery: Added support for the STM32L152RCT6 version of
17774 - TMS570: Added support for the TMS570LS3137ZWT. From Ivan Ucherdzhiev.
17778 - configs/tms570ls31x-usb-kit: Added support for the TI Hercules
17783 - CC3200: Remove all support for the CC3200. This was a port that was
17789 - EEPROM: Implements an EEPROM driver in compliance with MTD driver
17791 supports only two functionalities - read bytes(multiple of 4) and
17793 - FLASH: Implemented Flash CONFIG_MTD_BYTE_WRITE for TM4c1294.
17795 number of bytes to flash (in multiple of 4). From Shirshak Sengupta.
17796 - Serial: Added TERMIOS IOCTL support to the Tiva serial driver.
17801 - CC3200-Launchpad: Remove all support for the CC3200-Launchpad.
17803 partial CC3200-Launchpad board support with no wireless support?.
17807 - libs/: Moved all of the libraries under a common directory called
17810 - libs/libc/time: Added an implementation of clock().
17811 - libs/libc/lzf: Added a modified version of Marc Alexander Lehmann's
17813 - libs/libc/unistd: Initial, minimal implementation of sysconf().
17814 Only sufficient to support the functionality of less standard
17816 - libs/libdsp: Added DSP support library. From Mateusz Szafoni.
17817 - include/sys: Added resource.h.
17818 - include/nuttx/video: Add overlay support to framebuffer interface
17823 - tools/gencromfs.c: Added tools/gencromfs.c, a tool that can be used
17824 to generate CROMFS file system images.
17825 - tools/mkromfsimg.sh: Include an option in mkromfsimg.sh to ignore
17826 FAT/RAMDISK. This permits you to build tiny systems with ROMFS but
17828 - tools/nxstyle.c: Added check for blank lines before and after single
17830 - tools/sethost.sh: Added support for macOS.
17831 - tools/uncrustify.cfg: An initial cut at an uncrustify C formatting
17837 - Makefile: Added support for nconfig frontend for 'make nconfig'.
17839 - configs/: Added definition of strip to many Make.defs files.
17840 - staging/: Remove fixed lib/ subdirectory and its content. Replace
17844 - tools/: Move all build-related files (except the top-level Makefile)
17845 into the tools/ sub-directory. This really cleans up the top-level
17850 - apps/nshlib: Added the mkfatfs -r option which can be used to
17856 - apps/examples/adxl372_test and lxm330spi_test: Added ADXL372 and
17858 - apps/examples/cc3000: Removed the CC3000 example. From Alan
17860 - apps/examples/cromfs: Added an example of how to build a CROMFS
17862 - apps/examples/elf: Extend the ELF program module demo so that you
17864 - apps/examples/elf: Use strip command to make ELF binaries MUCH
17865 smaller. Added an option to strip debug symbols even if the debug
17867 - apps/examples/max31855: Added an example to read multiple max31855
17869 - apps/examples/netloop: Update network loopback example so that it
17870 can be used to test TCP KeepAlive.
17871 - apps/examples/nxdemo: Added nxdemo application From Alan Carvalho
17873 - apps/examples/powerled: Added arch initialization.
17874 - apps/examples/uavcan: Removed because apps/canutils/libuavcan is no
17879 - apps/system/lzf: Added the test case from Marc Alexander Lehmann's
17881 - apps/system/embedlog: Support for embedlog data loggin package from
17883 - apps/system/zmodem: Added an option to enable hardware flow control
17884 via termios. Allow stack size and priority to be configured.
17885 - apps/system/zmodem: Call tcflush() before closing the serial port.
17889 completes, and tries to close the serial port. But if there is
17890 buffered Tx data, then the close will hang when it tries to drain
17892 discards the buffered data and permits the close to continue.
17893 There is additional logic in nuttx/drivers/serial needed to work
17898 - apps/canutils/libuavcan. Removed! libuavcan has not built for a
17902 there is no alternative but to remove it.
17906 - apps/netutils/tftpc: Modified the TFTP client functions to use a
17907 data read/write callback instead of a file. This allows TFTP to
17908 write to arbitrary destination (in my case, a MTD device - for
17914 existing applications, eg the associated nsh commands dont need to
17919 - apps/wireless/bluetooth/btsak: Added a Bluetooth debug tool.
17927 - sched/sched: Fix a deadlock in SMP mode. Two months ago, I
17928 introduced sched_tasklist_lock() and sched_tasklist_unlock() to
17930 audio streaming aging test with lc823450-xgevk. However, I found a
17933 this case, call sequences were as follows. To avoid this deadlock,
17936 call. Also added critical sections to lib_filesem.c, mm_sem.c, and
17938 - sched/sched: Change ordering of round-robin time slice check
17945 even has a chance to run. From EunBong Song.
17949 - fs/fat: In fs_stat(), when stat'ing the root directory, avoid
17953 - fs/fat: Avoid calculating the bogus directory entry address for
17957 - fs/mount: Fix wrong size reported by df -h. Reason is that size
17959 than 4GB will overflow uint32_t type. Solution is to use uint64_t
17961 - fs/smartfs: Fix a hardfault in SmartFS. Problem occurred when
17964 - fs/vfs: Fix negative errno set in fs_open.c From Michal Lyszczek.
17965 - drivers/mtd: Fixed a W25 driver w25_cacheflush sector bug. From
17967 - drivers/mtd: mtdconfig_register() returned OK instead of -ENOMEM on
17972 - drivers/lcd/ft80x: ACTIVE host command appears to be formatted
17973 differently than other host commands; Fix ROM CHIPID. Appears to
17974 be big-ending, BCD. Fix some compile issues when debug features
17976 - drivers/lcd/ft80x: Fix a typo that caused the driver to fail to
17978 - Review all board implementations of board_lcd_initialize(). The
17980 as an 'int' must return a negated errno value on failure and a non-
17984 non-negative.
17988 - net/tcp: Fixed problem with send() retrun value when using
17989 nonblocking I/O over buffered tcp socket From Dmitriy Linikov.
17990 - net/sixlowpan: Fix a nasty, byte-ordering/endian-ness problem.
17993 - net/sixlowpan: Preserve big-endian (network order) when
17995 - net/sixlowpan: TCP send should have PSH and ACK flags set when
17996 sending. This matches the standard network (Ethernet) TCP send
17998 - net/udp: Fix several issues using connected UDP sockets: sendto()
18001 recvfrom() and poll() should not reset to accept any addresses but
18007 - net/udp: Resolve race condition in connection-less UDP sockets with
18008 read-ahead buffering. In connection-mode UDP sockets, a remote
18012 connection-less UDP sendto: A temporary remote address is written
18013 into the connection structure to support the sendto() operation.
18014 That address persists until the next recvfrom() when it is reset to
18015 accept any address. When UDP read-ahead buffering is enabled,
18017 in the connection structure for some time. This can cause read-
18018 ahead buffer to fail, dropping UDP packets. Shortening the time
18022 was added to the connection structure to indicate if the UDP socket
18023 is in connection mode or if it is connection-less. This change
18025 connection is always ignored if the UDP socket is not in connection-
18026 mode. No for connection-mode sockets, that remote address behaves as
18027 before. But for connection-less sockets, it is only used by sendto().
18031 - drivers/wiresless/ieee80211: Correct some initialization problems
18033 - drivers/ieee802154/xbee: Added a timeout to send logic to handle
18034 case where XBee module fails to respond to a Transmit request with
18039 - Per OpenGroup.org, syslog -- and, hence, nonstandard vsyslog, and
18040 debug wrappers -- does not return a value. Rename _vsyslog to
18043 - drivers/leds: Fixes RGB LED issues caused by uninitialized memory
18045 caused a rogue channel to be started causing errors in the pwm
18047 - drivers/sensors/lis2dh: Clear INT1 at SNIOC_WRITE_INT1THRESHOLD
18049 - drivers/sensors/sht21: Changed I2C_TRANSFER return value so that
18052 - drivers/serial: Per Matias Edlund: I recently used the tcflush
18056 success, the TCFLSH IOCTL logic needs to explicitly set the return
18057 value (ret) to zero.
18058 - drivers/serial: Added a timeout to uart_tcdrain(). Even if
18059 tcflush() is used to discard buffered data, the close() can still
18064 - drivers/sensors: Fix APDS9960 work queue BUG found by Kyle Lei.
18069 - arch/sim: Various fixes necessary to build the simulator under
18072 * ARMv7-R:
18074 - ARMv7-R: Corrected several ARMv7-R issues. From Ivan Ucherdzhiev.
18078 - XMC4500-Relax: Call xmc4_spidev_initialize() in xmc4_boot.c. From
18083 - LPC17xx USB: Fix USB device endpoint allocation bookkeeping. From
18085 - LPC17xx USB: Freeing endpoints should be set the same allocations
18087 - LPC17xx USB: Fix loss of RX initiatives. USB bulk endpoints are
18088 double buffered on LPC17xx MCUs. This means that up to two packets
18095 - Kinetis USG: USB device fixes: Use correct CONFIG OTG control,
18098 pending asynchronous resume interrupt needed to be re-armed after
18101 - Kinetis Serial: In kinetis_lowputc.c, fix esBRFA calculation
18102 effecting baudrate. Previous BRFA was not cleared and or-ed into
18106 - Kinetis Serial: In kinetis_lowputc.c, fixed parity settings.
18110 called 9-bit or 8-bit Mode Select is a misnomer. 8 bit mode when
18115 - configs/teensy-3.x: Remove CONFIG_USBDEV_DUALSPEED from the usbnsh
18120 - i.MX6: Bring in a few i.MX6 fixes that were committed to similar
18125 - STM32 F3: Problem: stm32f30xx hangs waiting for LSE to initialize.
18132 - STM32 and STM32 L4 1WIRE: In 1wire driver, do not write useless
18133 WRITEBIT zero return value to const buffer From Juha Niskanen.
18134 - STM32 HRTIM: Fixed capture_get function,. From raiden00pl.
18135 - STM32 F3 ADC: Fixed bug in RCC reset logic that resets ADC1
18138 - STM32 Ethernet: In case of PHY failure, usually because of the
18142 failure. This commit adds a retry loop to avoid bricking the board
18143 if the Ethernet block is unable to start. From Sebastien Lorquet.
18144 - STM32 F7 SDMMC: Added support for the second SDMMC device. The
18147 - STM32 Serial: Fix UART glitch when lowputc is enabled. From
18149 - STM32 USB: Skip recipient check for descriptor related
18154 - Tiva ADC: Fix compilation errors on Tiva ADC code when ADC is
18156 - Tiva Serial: Allow building of Tiva platform with no serial
18161 - lib/libc/netdb: Fixed boundary conditions in dns_recv_response().
18163 - libs/libc/modlib: Fixed backward test for an error in
18168 - Makefiles: Eliminate the spurious errors reported by 'make
18170 - Makefile(s): There is a sort command in the 'make savedefconfig'
18175 - Makefile(s): The clean_context target needs to invoke a
18176 corresponding clean_context target in the apps/Makefile in order to
18178 - LibTargets.mk, tools/Config.mk: Drop executable bit on installed
18179 libraries. The rules to install libraries under lib/ were modified
18180 to use mode 0644 instead of the default 0755. From Andrey Zabolotnyi.
18184 - apps/examples/ft80x: Fix some size calculations. Added option to
18185 disable primitive tests. just too boring to have to watch over and
18188 - apps/examples/ft80x: Text is handled by the coprocessor and, hence,
18190 - apps/examples/ft80x: Fix some errors in co-processor demos. Correct
18192 - apps/examples/nsh and posix_spawn: Must not call exec_setsymtab()
18193 directly. That is a non-POSIX internal OS interface.
18194 - apps/examples/ostest: Do not call AIO test without
18196 - apps/examples/smps: Fix typos in Kconfig. All power, voltage,
18199 - apps/examples/smps: Fixes in some printf and in Kconfig From
18201 - apps/system/zmodem: Fix Makefile.host. It was broken when zmodem.h
18202 was moved to apps/include/system. Fix an incompatibility with the way
18207 - apps/system: Applications should use the standard clock() interface,
18209 - apps/system/stackmonitor: Fix comparison between pointer and zero
18214 - apps/netutils/netlib: Various fixes needed to get a clean netlib
18219 - apps/wireless: Applications should use the standard clock()
18222 NuttX-7.26 Release Notes
18223 ------------------------
18227 that release consists of two tarballs: nuttx-7.26.tar.gz and
18228 apps-7.26.tar.gz. These are available from:
18233 Both may be needed (see the top-level nuttx/README.txt file for build
18240 - General: Eliminate use of the non-standard type systime_t and
18242 - General: Replace non critical PANIC with DEBUGPANIC to save the
18244 - General: Replace all ASSERT with DEBUGASSERT to save the code
18246 - Initialization: Add option to mount block device for
18248 - clock(): clock_systimer() is no longer a system interface. It has
18254 - clock Utilities: Move clock_timespec_[add|subtract] to
18256 - Binary Loader: Add binfmt_initialize(). All binary formats are
18257 now registered centrally vs. in board-specific logic. This
18259 - Binary Loader: Reference default symtab name to binfmt From anchao.
18260 - mm: Add mm_heapmember function and reimplement kmm_heapmember base
18263 - mm: Add {kumm/kmm}_calloc API. Add calloc API for manage user
18266 - pthreads: Add support static pthread stack. Add standard
18268 where the stack is released, add check to see which allocator must
18269 be used to free the stack: The user or the kernel allocator. From
18271 - Semaphores: Apply the semaphore wait function
18275 - Signals: Add default signal action to SIGKILL. From ligd.
18276 - Signals: Update the signal default action logic to support
18277 sigaction(). signaction() must be able to handle and input action
18278 of SIG_DFL to setup the default signal action; it mast also return
18280 - Signals: Default Signal Actions. Change some types to
18281 superficially simplify. Add configuration options to enabled
18282 default signal behaviors on a per-signal basis. I don't think
18283 users are prepared for SIGALRM to terminate the task (which is the
18288 - Signals: Add support for SIGINT in addition to SIGKILL.
18289 - Signals: Add logic and an interface to determine if a signal can
18291 any attempt to catch or ignore such signals (only SIGKILL for now
18293 - Signals: Add support for default signal actions for SIGSTOP,
18294 SIGSTP, and SIGCONT. Add procfs support to show stopped tasks.
18296 - Signals: Add nxsig_action() to solve a chicken and egg problem:
18297 We needed to use sigaction to set default actions, but sigaction()
18298 would refuse to set actions if the default actions could not be
18300 - Signals: Add configuration option to selectively enabled/disable
18302 - Signals: If a task/thread was already blocked when
18304 It will appear that to the task/thread that the blocked condition
18307 - Signals: Update signal default STOP action. If waitpid was
18310 - IRQs: Monitor the IRQ execution time. This is very useful for
18312 - IRQ Dispatch: Add support interrupt chains in NuttX. IRQ chain is
18313 very useful in these cases: (1) Multiple hardware connect to the
18314 same request line(e.g. PCI), (2) Need multiple driver to support
18316 - Work Queue: Modify high priority work queue to support multiple
18318 - System Calls: Add support for getpeername() and get_sockname()
18320 - System Calls: svcall/sycall logic needs to get the ucontext
18323 - CPU Load Measurement: Support the CPU load measurement using
18325 - Assertions: Change CONFIG_BOARD_RESET_ON_CRASH to
18326 CONFIG_BOARD_RESET_ON_ASSERT, arch/: Implement call to
18329 - boardctl(): Add support for board_app_finalinitialize() From ligd.
18330 - Architecture Interface: Add prototype for an architecture-specific
18332 - Architecture Interface: Add the garbage collection hook so each
18335 - Architecture Interface: Add architecture-specific prototypes for
18340 - ProcFS: Add support for a procfs entry that will permit examining
18342 - ProcFS: Add support for proc/self/, a convenient way for getting
18344 - HostFS: Add support for open() append mode From anchao.
18345 - HostFS: Add ftruncate support. From Xiang Xiao.
18346 - HostFS: Remove ARCH_SIM dependence since other architectures
18348 - HostFS: Support remote directory names without a trailing '/'
18350 - HostFS: Add re-try when hostfs mount() fails From ligd.
18351 - NFS: Update NFS client mount to VER3 From zhangyuan7.
18352 - Partitions: Add PTABLE parser fs/partion: Add a partition parser
18355 - MTD: Add gd25 driver From wangyanjiong.
18356 - MTD: In MTD partitions, copy the partition name to internal
18359 - MTD: Support initialization of an FTL block device with a custom
18361 - MTD: FTL: Reduce size of stack buffer from 64 to a maximum size
18363 - VFS poll(): Send poll() notification when the Tx buffer is flushed
18365 - VFS fstat(): Add file_fstat() function for internal OS use. From
18367 - VFS fcntl(): Add file_fcntl, psock_fcntl, and psock_dupsd for use
18369 - VFS dup2(): Addpsock_dupsd for use within the kernel. From Xiang
18371 - VFS poll(): Add poll use in kernel space. From dongjianli.
18372 - VFS select(): Make select be more consistent with Linux man page:
18374 empty, nfds zero, and a non-NULL timeout as a fairly portable way
18375 to sleep with subsecond precision.' From anchao.
18379 - Sockets: Add getpeername() support From ligd.
18380 - sockopt(): Move psock check from [get|set]sockopt to
18382 - getsockname(): Add psock_getsockname function From Xiang Xiao.
18383 - Netlink Sockets: This brings in a fragmentary, experimental
18384 implementation of NETLINK sockets. There is not too much to that
18386 framework. However, I decided to bring it into master because
18387 there is a enough that I would not want to lose what is in place.
18390 - Interface Indexes: Add driver interface index support. Add
18394 algorithm to prevent an interface index from being reused until all
18396 devices from being removed, unregistered and re-installed,
18397 re-registered and keeping the same interface index. From Gregory
18399 - Driver Interface: Add devif_loopback() to check the loopback
18400 case where a packet is being sent to itself. Modify the net driver
18401 to call this function in this case. This function will simply
18402 re-inject the packet back into the network and the network driver
18404 - Network Devices: Remove all references to CONFIG_NET_USER_DEVFMT.
18407 (2) it causes confusion in the configuration due to the additional
18408 complexity. Any network drivers that fail to zero the device
18412 - Network Devices: Add support for Microchip LAN91C111 driver From
18414 - Network Devices: netdev_findby_ipv[4|6]addr return
18417 - Network Device IOCTLs: Add si_ioctl callback and net_ioctl_arglen
18418 so usrsock could forward the ioctl to the remote end/ From
18420 - IPv6: Rename g_ipv6_allzeroaddress with the more meaning
18421 g_ipv6_unspecaddr since the all-zero address is the IPv6
18425 - ARP: arp_find() now checks if the target IP belongs to one of the
18427 - ARP: Make the function arp_find() thread-safe. It now returns a
18429 potentially unstable reference to the ARP table entry. From
18431 - TCP: Re-work of TCP receive window size algorithm. The new logic
18432 is based only on the ability to buffer TCP read-ahead data. From
18434 - UDP: Add support for the UDP_BINDTODEVICE protocol socket option
18436 - Slip: Uncomment the prompt of NET_SLIP_PKTSIZE in Kconfig file.
18438 - USRSOCK: Combine some the duplicated logic. From Xiang Xiao.
18439 - USRSOCK: Optimize option dependence From Xiang Xiao.
18440 - USRSOCK: Add the listen/accept/getpeername/ioctl support From
18445 - Analog DAC: Add driver for digital to analog converter DAC7571.
18446 Nucleo-L422KC: Add support for a connect DAC7571 converter. From
18448 - Audio Interface: Change member samp of apb to pointer so driver
18450 - Audio Interface: Add ioctl cmd 'AUDIOIOC_SETBUFFERINFO' so user
18451 space could config the buffer From ZhongAn.
18452 - Audio Interface: Add hardware format support From anchao.
18453 - I2S Interface: Add i2s_rxchannels and i2s_txchannels methods to
18455 - Audio: Move the I2S character driver to a dedicated folder. From
18457 - Audio: Add audio_i2s device driver. From ZhongAn.
18458 - Audio: Add the composite audio driver From Xiang Xiao.
18459 - Crypto: Move dev_urandom.c into new crypto folder. From Xiang
18461 - GPIO driver: Add gpio_pin_unregister function to GPIO driver
18462 driver/ioexpander: Add pinset struct to GPIO driver for interrupt
18464 ioexpander device. Add SETPINTYPE ioctl command to the GPIO
18466 - I2C Interface: Add a definition to distinguish a new START of
18467 messages from a repeated start. No lower-half I2C drivers actually
18470 I2C_M_NORESTART to I2C_M_NOSTART since it may be used in other
18471 contexts than a repeated start. Add comments to clarify setup for
18473 - I2C: Add the standard speed macros. From dongjiuzhu.
18474 - Leds: Add support to MAX7219 to control 7-segment displays. From
18476 - Power: PM: Add pm_stay and pm_relax function so special apps(e.g.
18479 - Power: PM: Add pm_querystate function From zhuguangqing.
18480 - Power: PM: Don't update the power state in work thread: (1)
18482 Power calculation is too simple to delay into the work queue From
18484 - Power: PM: Decrease the power state in the reverse order. Since
18487 - Power: PM: Make power manager service available as soon as
18490 - Power: PM: Add PM_RESTORE to notify driver that device exit WFI
18494 - Power: PM: Add timer to decrease PM level automatically. From
18496 - PTYs: Add support so that a PTY can poll for both IN/OUT event
18498 - PWM: Move pwm.c into pwm folder From Xiang Xiao.
18499 - RTC Interface: Extend struct rtc_time by adding. From Xiang
18501 - Sensors: Add support for Telair T6713 carbon dioxide sensor. From
18503 - Sensors: Add support for LSM303AGR and LSM6DSL sensors From
18505 - Sensors: Add driver for DHTxx sensor. From Ouss4.
18506 - syslog: Enable a partial, crippled version of syslog_flush();
18509 - syslog: Channel configuration. Decouple SYSLOG_SERIAL_CONSOLE and
18510 ARCH_LOWPUTC. Since some hardware can output log to the special
18512 - syslog: Support pre-pending a prefix string to log output if
18513 enabled. This very useful to identify which CPU send out the log
18515 - Serial: Add Ctrl-C/Ctrl-X support. From ligd.
18516 - Serial: Support UART direct write for non console device From
18518 - Serial: It is no longer necessary to restrict Ctrl-C handling to
18519 the FLAT build sched/signal: Add a new configuration option to
18522 Ctrl-C logic. Add a signal set in the group structure to keep
18523 track of what signals have been set to the default action. In
18525 set to determine if the default signal handler is attached and
18528 - Serial: Integrate new Ctrl-C logic with the ISIG flag in the
18530 - Serial: Use SIGINT instead of SIGKILL when control-C is pressed.
18532 - Serial: Add support for Ctrl-Z. This works just like the
18533 recently added Ctrl-C support except that SIGSTP is sent when the
18534 Ctrl-Z characters is encountered vs. SIGINT. From Gregory Nutt.
18535 - 16550 UART: Add a configuration, analogous to the STM32
18536 configuration option, to suppress the NuttX standard re-ordering
18538 - 16550 UART: Add CONFIG_SERIAL_UART_ARCH_MMIO option so the a
18539 memory mapped device doesn't need to provide uart_getreg() and
18541 - 16550 UART: Add stub implementations of DMA-related methods in the
18542 16550 UART v-table. From ligd.
18543 - 16550 UART: Add serial termios handling From anchao.
18544 - 16550 UART: Support 16550 auto hardware flow control
18546 CONFIG_16550_SUPRESS_INITIAL_CONFIG. This is identical to the
18550 - syslog: Make timestamp output same as linux kernel. It's very
18551 useful if NuttX syslog retarget to Linux syslog. From Xiang Xiao.
18552 - Timers: Add maxtimeout method to the struct timer_ops_s interface
18554 - Timers: Add a new method to the struct oneshot_operations_s
18555 interface to get the current time from a oneshot timer driver (if
18557 - Timers: Implement timer arch API on top of timer driver. From
18559 - Timers: Implement alarm arch API on top of oneshot driver
18561 - Timers: Implement RTC arch API on top of RTC driver interface.
18563 - CDC/ECM: Adds USB device support for CDC/ECM From Michael Jung.
18564 - USB Host: Add support for the Maxim M3421E USB host driver. Not
18567 * General Architecture-Specific:
18569 - All architectures: Make sure the up_irq_enable() is available on
18574 - Simulator Configurations: Add dsptest configuration. From Mateusz
18576 - Simulator: In network driver (1) Remove up_comparemac() check for
18578 the packet which belong to us like other real network device
18583 - ARM (all): Add CONFIG_DEBUG_MEMFAULT to Kconfig. From Masayuki
18585 - ARM: (1) Add semihost support for syslog, (2) Add semihost support
18588 * ARMv6-M:
18590 - ARMv6-M: Introduce CONFIG_DEBUG_HARDFAULT_INFO to up_hardfault.c
18593 * ARMv7-M:
18595 - ARMv7-M: Removes support for the dedicated vector handling from the
18598 - ARMv7-M: Introduce CONFIG_DEBUG_HARDFAULT_INFO to up_hardfault.c
18600 - ARMv7-M: Implement SYSTICK timer driver From Xiang Xiao.
18601 - Simulator: Add loadable demo for arch sim. From anchao.
18602 - ARMv7-M: Add logic to trigger ARMv7-M interrupts and exceptions.
18604 - ARMv7-M: Add NVIC definitions needed by up_trigger_irq(). From
18607 * ARMv7-R:
18609 - ARMv7-R: Add general interrupt controller. This is based on
18610 ARMv7-A gic controller code. From EunBong Song.
18611 - ARMv7-R: Add invalidate dcache in arm_head.S. From EunBong Song.
18615 - XMC4 GPIO: Add a specific bit encoding to GPIO driver for
18620 - XMC4500-Relax: Add support to MAX6675 on XMC4500-Relax board.
18625 - PIC32MX: Update some PIC32MX configurations so that either the
18630 - SAMD2x/L2x: Rename all usage of samdl/SAMDL to samd2l2/SAMD2L2 to
18635 - SAMD5x/E5: Add a port to the SAMD5x/E5x MCU family. From Gregory
18640 - SAMD5x/E5x SPI/I2C: Bring in untested SPI and I2C drivers from
18642 - SAMD5x/E5x DMA: Leverage the SAMD2L2 DMA controller. From Gregory
18644 - SAMD5x/E5x USB: Bring the SAMDL2 USB driver into the SAMD5E5
18649 - Metro M4: Add support for the Adafruit Metro M4 board. From
18651 - Metro M4: Add an option to build the Metro M4 image to run out of
18652 SRAM. This ought to be a safer and quicker way to do the initial
18653 bring-up (having bricked the first Metro M4 due to a bad FLASH
18655 - Metro M4: Add a configuration option to use OSCULP32K instead of
18657 - Metro M4: After some final fixes related to the SERCOM console,
18660 - Metro M4: Verify the CMCC and enable it by default in the NSH
18665 - SAMv7 CAN: Add ability for CAN BUS_OFF autorecovery according
18666 ISO11898-1:2015. With this change we added an ioctl for triggering
18667 the autorecovery sequence for BUS_OFF to the CAN-driver and the
18668 SAMV7 low-level driver. According the datasheet: If the device
18677 Error code is written to MCAN_PSR.LEC, enabling the processor to
18679 continuously disturbed and to monitor the Bus_Off recovery
18680 sequence. MCAN_ECR.REC is used to count these sequences. From
18685 - i.MXRT RTC: Add support for the i.MXRT RTC. This is code complete
18691 - i.MXRT SNVS: Add trivial SNVS from Rev 1. of the Reference Manual.
18693 - i.MXRT LSPI: IMXRT1050 LPSPI register and bit definitions added.
18695 - i.MXRT Serial: IMXRT1050 LPUART TERMIOS support added. From Ivan
18700 - IMXRT1050-EVK: Add knsh configuration. PROTECTED mode NSH build.
18705 - Kinetis: Add DMA support. From David Sidrane.
18709 - Kinetis: Use circular DMA as an option to augment the RX FIFOs in
18714 - LPC54xx: The LPC54608 can only run at a maximum frequency of
18716 crystal clock, to drive the PLL. When that input was selected, the
18717 board bootup failed waiting for the PLL to lock. After referring
18722 - LC823450: Add support for mpu and userspace LC823450-XGEVK: Add
18723 kostest PROTECTED build LC823450-XGEVK: Add knsh PROTECTED build
18728 - Lpcxpresso-LPC54628: Update lvgl board config to use the new
18733 - LC823450 Bluetooth: Add lc823450 Bluetooth support. From Masayuki
18735 - LC823450 I2S: Add tx start threshold to lc823450_i2s.c In
18736 addition, lc823450_i2s_send() now accepts byte-aligned stream.
18738 - LC823450 SPI: Add SPI flash driver for lc823450. NOTE: Only bus
18740 - LC823450: Change C-Buffer under-level control. The under-level
18741 setting was changed from 1KB to 55KB. In previous implementation,
18748 - LC823450-XGEVK: Add loopback test for digital MIC on lc823450 via
18750 - LC823450-XGEVK: Add lc832450 elf test. From Masayuki Ishikawa.
18751 - LC823450-XGEVK: Add posix_spawn configuration From Masayuki
18756 - STM32 L4: Add initial support to STM32L4+ chips From Juha Niskanen.
18757 - STM32 H7: A partial port to the STMicro STM32H7 by Simon Laube was
18760 now functional, thanks to Mateusz Szafoni.
18764 - STM32 F0, F1-F4, F7, L4, H7: Added Single Wire Kconfig variable.
18766 - STM32 DAC: Set OUTEN bit for DAC1CH2 and DAC2CH1 power/motor.
18769 - STM32 F1-F4 ADC: Allow multiple channels without DMA on
18771 - STM32 F1: Add FLASH register definitions for F1 parts that have
18773 - STM32 F2: Added progmem interface support for STM32 F2 From
18775 - STM32 F4: Ports STM32 LTDC and STM32 DMA2D to use the
18777 - STM32 F7: This change ports Marco Krahl's STM32F4 framebuffer
18780 - STM32 F7: Port input capture from stm32. From Juha Niskanen.
18781 - STM32 F7 FLASH: Ported the STM32 F2/F4 driver to the STM32 F7
18783 - STM32 F7 SDMMC: Add SDIO card support to SDMMC driver. From
18785 - STM32 F7 Serial: Previous logic would invalidate the data cache as
18786 each byte was read from the DMA buffer. This change adds logic to
18790 - STM32 F7: Add up_stackcheck.c From Daniel Agar.
18791 - STM32 F7: Port the low-level PM functions to STM32 F7. From Juha
18793 - STM32 L4: STM32L4 has fetchadd and testset From Juha Niskanen.
18794 - STM32 L4: Added custom pin mapping for STM32L4X2XX processors.
18796 - STM32 L4 FLASH: stm32l4xrxx: allow board to override flash wait
18798 - STM32 L4: Some updates to analog peripherals ADC, COMP and DFSDM
18800 - STM32 L4: Add getstatus and getperiod() method to the timer
18801 driver (includes coding standard changes made prior to commit)
18803 - STM32 H7: Remove old references to RXDMA. Add configuration
18804 - STM32 H7: Remove old references to RXDMA. Add configuration
18805 option to select the Rx FIFO threshold level. From Gregory Nutt.
18809 - STM32F103 Minimum: Add blackpill LED support From Russ Webber.
18810 - Viewtool-STM32F107: Add a TCP performance test using
18812 - Viewtool-STM32F107: Add support for the MAX3421E to the
18813 Viewtool-STM32F107 board support From Gregory Nutt.
18814 - STM32F334-DISCO: Use a PID controller from libdsp in the BuckBoost
18816 - STM32F4-Discovery: Remove STM32F4BB dependence from RNDIS; add
18818 - STM32F4-Discovery Add board support for MAX7219 as numeric display
18820 - Olimex-STM32-P407: Add kernel ELF (kelf) configuration. From
18822 - Olimex-STM32-P407: Add a kmodule configuration that can be used
18825 - Olimex-STM32-P407: Add logic to support initialization of the
18828 appears to be fully functional. From Gregory Nutt.
18829 - Olimex-STM32-P407: Add board support for the DHTxx sensor. From
18831 - STM32F476G-DISCO: Add support for STM32F746G-disco board LCD.
18833 - STM32F476G-DISCO: Add a configuration to build working nxdemo
18835 - STM32F476G-DISCO: Add support for STM32F746G-disco board SDRAM
18836 Changed fb config to use SDRAM. From Marcin Wyrwas.
18837 - STM32F476G-DISCO: Add touchscreen support and a LittlevGL demo for
18838 STM32F746G-DISCO From Marcin Wyrwas.
18839 - Nucleo-L476RG: Add support for an external SPI-driven SD card on
18840 the Nucleo-L476RG. From Gregory Nutt.
18841 - Nucleo-L476RG: Add support for LSM303AGR and LSM6DSL sensors From
18843 - Nucleo-H743ZI: Use Nucleo Virtual console as default console in
18845 - STM32L4R9-DISCO: Add stm32l4r9ai-disco support. From Juha Niskanen.
18846 - B-L475E-IOT01A: Add timer driver support. From Goden Freemans.
18850 - libc endian: Add support for endian.h. From Gregory Nutt.
18851 - libc net: Add inet_aton() From Juha Niskanen.
18852 - libc netdb: Add getaddrinfo() and friends. From Juha Niskanen.
18853 - libc termios: Add lib_cfmakeraw.c From Masayuki Ishikawa.
18854 - libc stdlib: Add implementation of random() and srandom(). From
18856 - libc unistd: Add a crippled version of daemon(). From Gregory Nutt.
18857 - libdsp: All floats with f-sufix libdsp: (1) add precision option
18861 observer, (6) fix phase shift in SMO observe, (7) add more logic to
18863 - include/nuttx/compiler.h, include/poll.h: Add logic to determine
18866 - include/nuttx/mutex.h: Add inline wrapper functions to more
18868 - include/nuttx/nuttx.h: Added nuttx.h header file which is
18869 analogous to the linux.h header file. Currently, it contains on
18871 - include/queue.h: Add dq_tail marco From zhuguangqing.
18872 - include/stdio.h: Add prototypes for popen() and pclose(). Actual
18874 - include/sys/param.h: Add a dummy sys/param.h header file. This is
18880 - nuttx/tools/kconfig2html.c: Due to new usage, tool needs to be
18881 able to handle configuration files with names other than Kconfig.
18883 - nuttx/tools/kconfig2html.c: Update tool to handle tristate types.
18885 - nuttx/tools/Config.mk: Add function CATFILE definition. Currently
18887 - nuttx/tools/Config.mk: Add the recursive wildcard function,
18888 RWILDCARD, to Config.mk. From Gregory Nutt.
18889 - nuttx/tools/testbuild.sh: Add an option to specify the location of
18891 - nuttx/tools/refresh.sh: Add a --prompt option that will let you
18892 use --silent but will prompt before overwriting the original
18894 - nuttx/tools/link.sh. Update link.sh per suggestions by Mark so
18896 - nuttx/tools/mkexport.sh: Save the System.map file and User.map
18897 file (if it exists) in the export package so that it can be used to
18899 - nuttx/tools/mkexport.sh: Save the name of the STRIP tool too. From
18901 - nuttx/tools/nxstyle.c: Add capability to detect multiple blank
18903 standard fixes to server .c files for problems found during testing
18905 - apps/tools: Add +x to mksymtab.sh. From Masayuki Ishikawa.
18906 - apps/tools/define.sh and define.bat: Move a copy of define.bat
18907 and sh from nuttx/tools to apps/tools so that they will be
18912 - Apps/ Build System. The apps/ build system has undergone a major
18913 renovation to better support building applications as ELF modules.
18914 Module selections have changed from 'bool' to 'tristate' types.
18916 to 'm'. This effort required many changes, too many to summarize
18918 An, and Xiang Xiao (and myself to a lesser extent).
18919 - NuttX/ Build System: This change extends support for the two-pass
18920 build. Its primary purpose is to incorporate source logic
18928 The primary purpose of the pass1/ directory is to such
18929 application-generated kernel symbol tables. For an example of the
18932 needed to support kernel modules. Of course, addition
18933 board-specific logic in, say, configs/<board>/src would have to be
18934 included to make use of the application-installed symbol tables.
18936 - Remove CONFIG_ARCH_CALIBRATION. It is awkward to use and no longer
18939 - Build System: With recent changes to apps/ all configurations that
18942 - Build System: Add dynamic application loadable support. From
18944 - Build System: Add configuration CONFIG_ARCH_GNU_NO_WEAKFUNCTIONS
18945 to suppress use of weak functions. Some gnu derived toolchains do
18947 - Kconfig: Move 'option modules' from NSH_FILE_APPS to
18949 - apps/ Build System: Introduce a build system for loadable apps
18950 for nsh. Add 'option modules' to NSH_FILE_APPS so that a user can
18951 change an application configuration to tristate (y/n/m)
18952 - apps/import: Add Makefile.symtab which can be used to compile the
18958 - apps/nshlib: Add parsing support for back-slash quoted
18960 CONFIG_NSH_ARGCAT is also selected. This commit is in response to
18962 - apps/nshlib: Add inverted logic support in the form of 'if !
18964 - apps/nshlib: Expand reboot and poweroff commands to include a
18966 - apps/nshlib: Add a force flag (-f) to mksmartfs command. SmartFS
18969 - apps/nshlib: NSH prompt string is now configurable. nsh> is
18971 - apps/nshlib: Add control-C support for terminating built-in and
18973 - apps/nshlib: Call BOARDIOC_FINALINIT after start-up script (or
18974 immediately after BOARIOC_INIT is there is no start-up script).
18976 - apps/nshlib: When using waitpid() to wait for a built-in
18977 application or a file application to exit. Add the WUNTRACED
18978 options to so the the waitpid() call will also be awakened if the
18979 waited-for task is stopped as well. From Gregory Nutt.
18983 - apps/builtin/Makefile. This commit changes apps/builtin to search
18986 them up and reinstall if something needs to be updated. Based on
18991 - apps/examples/calib_udelay: Add tool for calibrating
18993 - apps/examples/dhtxx: Example for the DHTxx sensor. From Ouss4.
18994 - apps/examples/dsptest: Add unit test for Nuttx DSP library From
18996 - apps/examples/elf: CROMFS and ROMFS configuration currently only
18997 usable in FLAT build. Add configuration to use ELF objects on
19000 - apps/examples/elf: If the test ELF files are on media in
19004 - apps/examples/fb: Adds example to test framebuffer overlay From
19006 - apps/examples/gps: Add GPS example using MINMEA lib From Alan
19008 - apps/examples/i2sloop: Add i2sloop application. This application
19009 can be used to test I2S loopback like: ' nsh> i2sloop &'. From
19011 - apps/examples/lvgldemo: Update LVGL to version 5.1.1 From Alan
19013 - apps/examples/module: Add support for CROMFS and for stripping
19015 - apps/examples/module: Add support for automounting removable media.
19016 This involves a wait for the block driver to become available
19018 - apps/examples/module: When built in the PROTECTED or KERNEL
19021 internal OS symbols thar are not available to the application
19022 build. With this change the examples does not attempt to build
19027 - apps/examples/ostest: Add a small test for SIGSTOP, SIGCONT, and
19029 - apps/examples/popen: Add a test of popen/pclose. From Gregory
19031 - apps/examples/powerled: Add arch initialization. From Mateusz
19033 - apps/examples/tcpblaster: Add TCP performance measurement test.
19038 - apps/system/cle: Usage improvements including command line
19041 - apps/system/i2c: Adapt to rename I2C_M_RESTART->i2C_M_START.
19043 write-read and write-write mesage sequence. From Gregory Nutt.
19044 - apps/system/i2c: Allow registers besides 0x00 in the dev command.
19046 - apps/system/nsh: Add logic to automatically register an
19049 - apps/system/nsh: The symbol table name and size variable names
19051 - apps/system/nsh: Move apps/examples/nsh to apps/system/nsh. It
19054 - apps/system/nxplayer: Refactor nxplayer.c. Apply
19057 - apps/system/nxplayer: Release buffer before session and release
19059 Remove & for apb->samp reference. It is already a pointer. From Xiang Xiao.
19060 - system/nxplayer/nxplayer.c: Add playraw command From ZhongAn.
19061 - apps/system/nxrecorder: Add nxrecorder application From ZhongAn.
19062 - apps/system/popen: Add an implementation of the standard popen()
19066 - apps/system/system and popen: Adapt so that these can be used in
19069 environment where /bin/sh exists and can be used to execute one
19074 - apps/system/taskset: Add taskset command for SMP systems. This
19075 command can be used to retrieve or set a process's CPU affinity.
19078 nsh> taskset -p 4
19081 nsh> taskset -p 3 4
19084 nsh> taskset -p 1 busyloop &
19087 - apps/system/zmodem: Support -p <path> for rz to change the folder
19088 for the received file. Switch debug output from printf to
19089 syslog. Send the next packet for ZME_ACK in ZMS_SENDING to avoid
19095 - apps/netutils/dhcpc: Activates BINDTODEVICE if available. From
19100 - apps/wireless/i8sak: i8sak daemon now gets shutdown if not in use.
19102 command, it would stay running. This means that if you want to use
19103 i8sak to setup your network, but then want exclusive access to the
19104 char device, or network device, you have to manually shutdown the
19105 i8sak daemon. Now the daemon stays active as long as required to
19111 - mkfatfs: Clean up some name BS_ and MBR_ refer to the same record
19113 - mkfatfs: Add definitions for the FAT boot record (FBR). From
19115 - mksmartfs: Add a check to see if the SmartFS is already
19120 - graphics/littlevg/: Update LVGL to version 5.1.1 From Alan
19125 - testing/unity: Add Unity - unit testing library from
19134 - Signals: Signal handlers maybe run with interrupts enabled or
19140 This change forces interrupts to be enabled in up_sigdeliver()
19142 explicitly. This is safe because, when we return to normal
19143 execution, interrupts will be restored to their previous state when
19146 - Signals: Lock the scheduler while while killing the children so
19147 that we do not lose priority and let the task group continue to
19149 - Groups: Fix a deadlock when loading an ELF From Masayuki Ishikawa.
19150 - Groups: In some circumstances, group_killchildren() could have
19151 called pthread_cancel() to kill a task. Also, the behavior would
19153 - Posix Message Queues: mq_notify() fix - only part of struct copied
19154 to internal structure. As source address the address of the struct
19156 struct. This leads to invalid data being copied to internal
19159 - vfork(): vfork operation needs to allocate and copy the task
19164 - IRQ Dispatch: Ensure vector never points to NULL since interrupt
19166 - Work Queue: workqueues don't need set global data to zero since
19170 - Work Queue: Remove work queue polling delay to simplify the code
19172 - syslog: Fix syslog crash on 64bit simulation. From anchao.
19173 - Pipes: Write to a pipe when there are no readers from the pipe
19174 should return -EPIPE. From ligd.
19175 - System Calls: Fix 6th parameter type of posix_spawnp in
19177 - System Calls: Remove unused SYS_nnetsocket from syscall.h. Because
19180 - Binary Loader: Refactor binfmt_exec.c. This change also fixes an
19183 - Binary Loader: Re-architect the way that loadable ELF or NXFLAT
19186 the death-of-child SIGCHLD signal to perform the unload. There are
19190 because the user signal handler attempts to run in the kernel
19193 - ELF Binary Loader: Set priority level to default if parent has no
19198 - Auto-mounter: Ignore return values from work_cancel(). From
19200 - SmartFS: Fixed filesystem corruption when writing to small file
19202 - SmartFS stat(): A previous change added support for checking if a
19204 way that breaks smartfs file-type stat flags. CROMFS is similarly
19205 broken, as tools/gencromfs.c was not updated to match the
19207 not a good idea to use NuttX sys/stat.h bit-field values directly
19209 - HostFS: Update duplicated definitions in HOSTFS that must match
19211 - HostFS: Ensure f_type is equal to HOSTFS_MAGIC. From Xiang Xiao.
19212 - ROMFS: Make romfs_devread32 more portable From anchao.
19213 - TmpFS: Correct logic in tmpfs_ioctl() that extracts the priv state
19215 right value and causing mmap() to fail. Noted by Jesse. From
19217 - ProcFS network statistics: Was not handling the output correct for
19219 - ProcFS IRQs: Fix occasional computation error when fracpart >=
19224 - TAP/TUN: Fixed custom tun devname formatting. From Dmitriy Linikov.
19225 - Network Drivers: This change attempts remove some long standard
19229 the naming of most things called MTU to PKTSIZE. For example,
19239 the IP header and TCP header sizes (for the case of TCP). Now it
19240 is derived for the PKTSIZE by subtracting the IP header, the TCP
19244 - netdev: Fix.. Too many calls to net_unlock() From Gregory Nutt.
19245 - IPv6: There are many different checks for IPv6 multicast
19247 specifies how to detect an IPv6 multicast address: they should
19252 - ARP: Fix some backward logic in an if condition. From Gregory
19254 - TCP Re-assembly: Rename CONFIG_TCP_REASSEMBLY to
19255 CONFIG_IPv4_REASSEMBLY. Add some fixes to get a clean compile with
19261 in any context where IPv4 packets may be reassembled for multiple
19263 - TCP: Set the default TCP MSS to the value required by RFC 879 and
19265 requests a larger MSS via an option the TCP header. From Gregory
19267 - TCP: Fix a deadlock condition that can occur when (1) all network
19268 logic runs on a single work queue, (1) TCP write buffering is
19269 enabled, and (2) we run out of IOBs. In this case, the TCP write
19275 - TCP: Remove g_netstats.tcp.syndrop++ from tcp_data_event() From
19277 - TCP Monitor: Fix net unlock issue when tcp close. This bug could
19279 - UDP: When sending a broadcast (or multicast) packet do not attempt
19280 to look up the device by the destination IP address. Rather, use
19281 the locally bound address for these cases to select the correct
19283 - UDP: Restore some legacy behavior that was lost with the
19286 is not bound to a device, there select some arbitrary device. This
19291 - UDP: Fix for network byte-order issue when checking if an address
19293 - USRSOCK: Correct of semaphore usage issues. From Gregory Nutt.
19294 - USRSOCK: Fix re-definitions of struct iovec. From ligd.
19295 - ICMP/ICMPv6 Connection: Change the type of id in
19296 icmpv[6]_findconn to uint16_t From Xiang Xiao.
19297 - ICMP/ICMPv6: Fix failure to poll ICMP socket issue. From
19302 - XBee: Fixes issue with timeouts. Timeouts were in ticks but
19304 causing redundant packets, etc. From Anthony Merlino.
19305 - BCM43xx: Add missing logic to the BCM43xx IEEE 802.11 driver to
19308 - BCM43xx: Bring in some fixes from the 'Haywire' branch. From
19313 - Audio: Fix compile error in i2schar.c (CONFIG_DEBUG_ASSERTIONS=y)
19315 - Audio I2S: Fix bad NULL pointer check From Juha Niskanen.
19316 - Input: Fixed FT5x06 driver to correctly close (previously it
19318 - MMC/SD: Fix an error that was causing SDIO multiple block
19320 - Sensors: Increases SPI frequency in MAX6675 from 400Khz to 4MHz.
19322 - Sensors: Remove comment references to touchscreens from ADXL345
19324 - Serial: Don't overwrite nwritten unconditionally on UART write
19326 - Serial DMA: Move head/tail pointer reset to uart_recvchars_dma
19329 - Serial DMA: In DMA mode, the use of uart_disablexinit() is
19330 insufficient to protect a critical section.
19333 - Serial DMA: Fix typo error in uart_recvchars_dma() From Xiang Xiao.
19334 - 16550 UART: u16550_txempty() should check UART_LSR_TEMT to avoid
19337 * ARMv7-A:
19339 - ARMv7-A (and i.MX6): Add support for per-CPU IRQ and FIQ interrupt
19344 * ARMv7-R:
19346 - ARMv7-R: Fix some wrong configuration of program status
19348 PSR_A_BIT bis is set automatically as arm cortex-r4 reference
19349 manual 3.7.4. So we don't need to set this bit. From EunBong Song.
19350 - ARMv7-R: Fix some wrong MPU register definition. Change
19351 MPU_RBAR_ADDR_MASK and MPU_RACR_TEX_SHIFT mask as arm cortex-r4
19352 reference manual. Region Base Address Register 0-4 bits are
19353 reserved. MPU Region Access control register type 3-5 bits. From
19356 * ARMv7-M:
19358 - ARMv7-M, Cortex F7: Add a configuration to enable workaround for
19359 r0p1 Errata 837070: Increasing priority using write to BASEPRI does
19360 not take effect immediately. This update is required to be
19361 serialized to the instruction stream meaning that after this update
19363 priority than the new boosted priority can pre-empt execution.
19365 immediately, allowing the instruction after the MSR to be
19367 priority. This effect is only limited to the next instruction.
19368 Subsequent instructions are guaranteed to see the new boosted
19371 - ARMv7-M: MPU: mpu_log2regionceil needs take into account the
19373 - ARMv7-M MPU: The prototype of mpu_log2regionfloor() changed; an
19374 additional parameter was added. However, none of the calls to
19375 mpu_log2regionfloor() were updated to pass the new, additional
19380 - XMC4 SPI: XMC4 SPI was working only for the first transfer From
19385 - SAMv7 MCAN: Correct an error in the BUS_OFF reporting. In case of
19386 BUS_OFF the old implementation was leading to a package storm. Now
19392 - LPC43xx CAN: Fix lpc43 CAN configuration. Configuration settings
19395 - LPC43xx: Make WWDT usable again. LPC43xx WWDT driver was not
19402 - kinetis: USB0 fix interrupt storm on error. The ERROR bit of
19403 USBx_ISTAT needed to be cleared once an error occurs. From David
19405 - Kinetis: SDHC fix SDIO driver so that DMA works. There were 2
19408 completion, TC is a valid way to determine that the transfer is
19410 SDHC_SYSCTL[RSTD] clears the bits 24-0 in SDHC_PROTO this looses
19412 - Kinetis: (1) PIT add Liftime and Chaining, (2) flexcan fix
19414 format with parity fix. The 9-bit data mode is typically used with
19415 parity to allow eight bits of data plus the parity, (4) lowputc
19416 LPUART_BAUD_INIT has to be defined. Build fails with test case
19418 defined then LPUART_BAUD_INIT has to be defined even if the LPUART
19420 - Kinetis: I2C ensure timeout on bus error. The code had a dead
19421 wait on I2C_S_BUSY. Noise on the bus would cause the driver to
19422 hang. Add timeout on invalid states of I2C_S_BUSY to allow the
19427 - i.MXRT Ethernet: I finally got the Ethernet CRC32 to work properly
19436 - LC823450-XGEVK: Fix parallel build on lc823450-xgevk. This change
19441 - LC823450-XGEVK: Change IOB related params for rndis. Since TCP
19448 - STM32 F7: Fix compile error caused by intentional use of fall
19453 - STM32 F1-F4: Port Bob Feritich's change to STM32 F2 and F4 which
19454 appear to have identical SD support and I/O compensation
19456 - STM32 F1-F4, STM32 F7, and STM32 L4: The STM32 RTC driver was
19458 correct. For example, if you want to disabled the STM32 RTC and
19460 depends on the global CONFIG_RTC. The solution is to add a new
19461 CONFIG_STM32xx_RTC configuration option the permits to you select
19462 or deselect the STM32 RTC but still be able to selecte the external
19464 - STM32 F3 I2C: Fix compile error with I2C reset. From Juha
19466 - STM32 F7 Serial: Fix ioctl TIOCSSINGLEWIRE The TRM notes that UE
19467 must be disabled in order to write HDSEL in USART_CR3. This was not
19468 being done, so calls to TIOCSSINGLEWIRE were silently failing.
19470 before writing HDSEL, then re-enables it if neccesary. From Kurt
19472 - STM32 F7 DMA: DMA macros did not account for the increase from 8
19473 to 16 DMA channels. From Gregory Nutt.
19474 - STM32 F7 I2C: I2C reset Configure I2C pins as GPIO output. Pins
19475 were reset to inputs in the deinit(). This resets them to outputs.
19477 - STM32 F7: All of the SDMMC pins were set to 50 MHz, but not the
19478 clock. This sets the clock to 50 MHz also. This combined with
19481 - STM32 F7: Port Bob Feritich's change to SDMMC2 and to all other
19482 STM32 F7 architectures. Also add a configuration option to
19484 - STM32 F7 SDMMC: Fix data timeout errors with multi-block
19486 - STM32 L4: Corrects some mistakes in pin definitions for the
19487 STM32 L4 family. According to datasheet of STM32L496xx, STM32L475xx
19490 - STM32 L4: Avoid using redundant CONFIG_STM32L4_STM32L4X2. This is
19492 to reduce macro clutter. This patch limits
19493 CONFIG_STM32L4_STM32L4X2 usage to dependency tracking and pinmap.
19496 - STM32 H7 Serial: don't include stm32_dma.h From raiden00pl.
19500 - STM32F4-Discovery: Fix pca9635pw LED driver compilation on
19501 STM32F4-Discovery. From Alan Carvalho de Assis.
19502 - STM32F4-Discovery: Krassimir Cheshmedzhiev claims that sys/types.h
19503 needs to be included in the RGB LED file to avoid undeclared 'OK'
19505 - STM32F4-Discovery: Missing EXTERN(_vectors) in linker script.
19507 - Nucleo-L422KC: Fix RAM size; STM31L4x2xx has only 64Kb of RAM.
19508 Remove references to I2C and SDIO: There is no I2C2 or SDIO on the
19510 - Nucleo-L422KC: Fix stm32_userleds. After change LD2 to LD3 in
19512 - Nucleo-L422KC: Fix TIMx clock configuration. Also removes
19513 definitions related to timers not available in the STM32L432KC.
19515 - Nucleo-L452RE: Fix TIMx clock configuration. This is cloned from
19516 similar change to the Nucleo-L422KC. Also fixes DAC build
19518 - B-L475E-IOT01A: Fix copy paste errors in names:
19519 stm32_bringup->stm32l4_bringup. Noted by Freemans Goden. From
19521 - STM32VL-Discovery: Changed the status LED to be the green one as
19528 - libc audio: Call nxsem_destroy in apb_free. From Xiang Xiao.
19529 - libc netdb: The 'port' argument to the static alloc_ai() function
19532 to host byte order. From Gregory Nutt.
19533 - libc netdb: Fix a link error in lib_gethostbynamer.c with protected
19537 - libc unistd : Fix backward conditional logic in Kconfig. From
19539 - include/nuttx/compiler.h: Fix warning: __cplusplus is not defined.
19542 - include/nuttx/fs/binfs.h: Fix warning: Type defaults to 'int' in
19544 - include/nuttx/net/ethernet.h: Remove CONFIG_NET_ETHERNET guard
19546 - include/nuttx/semaphore.h: don't include nuttx/fs/fs.h. (1) Avoid
19549 - include/crc64.h: Fix warning: integer constant is too large for
19551 - include/limits.h and include/sys/types.h: Fix warning about
19553 to '-' used whete '_' intended. From Xiang Xiao.
19554 - include/spawn.h: Fix posix_spawnattr_destroy warning: 'the
19556 - include/sys/types: Move wint_t and wctype_t from wchar.h to
19560 - apps/include/netutils/netlib.h: Eliminate a warning about
19565 - Build System: Fix parallel build in making context. This change
19569 - Kconfig files: Fix several errors noted by Alex Denisov in
19571 - apps Build System: Fix an error when building apps/ without
19577 to duplicate scripts as necessary in the apps/tools directory.
19578 Also added a top-level target to compile the symbol table. Misc
19581 - apps/Application.mk: If a loadable module is generated the we
19582 need to add logic to remove the loadable module in the 'make
19587 - nuttx/tools/Makefile.unix: Was not cleaning up export directory
19589 - apps/tools: Fix an error in mksymtab.sh From Masayuki Ishikawa.
19593 - apps/nshlib: Fix 'while' and 'until' loop condition The loop
19596 loop. This is the opposite of how it is supposed to work. The
19599 - apps/nshlib: I was able to cause an assertion with some typos in
19602 - apps/nshlib: Increase the default configuration for the maximum
19603 number of command line arguments to 7 (CONFIG_NSH_MAXARGUMENTS).
19604 This is needed for 'mount' with the -o option. From Xiang Xiao.
19605 - apps/nshlib: Do not dereference NULL 'pstate' in nsh_console.c.
19610 - apps/examples: Remove illegal calls into OS to initialize BINFMT
19611 support. This must be moved to the board initialization logic
19613 - apps/examples/nettest: Fix typo: NET_LOOPBACK ->
19616 - apps/examples/ostest: Signal handling tests should use the same
19619 - apps/examples/ostest: Attempt to make the nested signal test
19623 - apps/examples/smps: Fixes in some printf and in Kconfig. From
19628 - apps/system/cu: (1) Protect from possible re-definition of signal
19629 values, (2) Fix CU ctrl-C hand when remote core hang. From ligd.
19630 - apps/system/i2c: Fix a backward comparison in i2c_main.c. Noted
19632 - apps/system/nsh: Fix compile errors with
19634 - apps/system/ping and ping6: Send ID and seqno in network byte
19636 - apps/system/ping and ping6: Change dependency in ping and ping6
19638 may need to be available even if ICMP and ICMPv6 sockets are not
19640 - apps/system/system: Add 'const' to make function prototype
19642 - apps/system/zmodem: Fix error "sz_main.o: No such file or
19647 - apps/netutils/ftpc: Fix handling of url-encoded strings From
19649 - apps/netutils/ping: Remove unsupported ping. netutils/ping is not
19650 supported anymore. It's better to remove this folder for
19656 - apps/wireless/wapi: Remove dependency on CONFIG_EXPERIMENTAL from
19661 - apps/gpsutils/minmea: Include wchar.h in minmea.c file to fix
19666 - Remove apps/interpreters/micropthon. There are several reasons
19671 failures reported. It looks like this is due to changes in newlib
19674 https://bitbucket.org/nuttx/nuttx/issues/104/build-micropython-138-error.
19675 With no one dedicated to the support of micropython, it can no
19678 NuttX-7.27 Release Notes
19679 ------------------------
19683 that release consists of two tarballs: nuttx-7.27.tar.gz and
19684 apps-7.27.tar.gz. These are available from:
19689 Both may be needed (see the top-level nuttx/README.txt file for build
19696 - Assertions: Add 'BOARD_ASSERT_RESET_VALUE' in config/Kconfig and
19697 replace reboot status '0' to 'CONFIG_BOARD_ASSERT_RESET_VALUE'. From
19699 - Assertions: up_registerdump capture the general register if not yet
19701 useful to find the cause of failure. From Xiang Xiao.
19702 - Assertions: up_stackdump() dump the full stack if stack overflow the
19703 stack info is very useful to find the backtrace From Xiang Xiao.
19704 - binfmt/ and libs/libc: Make exepath_*() more common: Move
19705 exepath_*() related code to libc/misc, rename exepath_ to envpath_,
19706 and rename BINFMT_EXEPATH to LIB_ENVPATH. From nchao.
19707 - CLOCK: Support CLOCK_MONOTONIC in clock_getres.c. From Xiang Xiao.
19708 - Clock Timekeeping: Use clock_basetime() to initialize
19709 g_clock_wall_time to get the best initial RTC value and initialize
19712 - exit(): Add SCHED_EXIT_KILL_CHILDREN option to kill all child threads
19714 - IOBs: Add an IOB notifier that will notify any registered threads
19715 that want to known when an IOB has been freed. This is basically just
19717 used to reduce the rate of IOB notifications. From Gregory Nutt.
19718 - Memory Manager: In mm_free(), add DEBUGASSERT()'s to catch memory
19720 - Memory Manager: Add debug option CONFG_MM_FILL_ALLOCATIONS to fill
19722 - sched/signal and syscall/: Add support for pselect() and ppoll()
19724 - Task Groups: group_foreachchild() now iterates in reverse order since
19727 - WDOG Timer: Improve accuracy of wd_gettime() in tickless mode From
19729 - Work Queues: Add a generic notification facility that runs on a work
19730 queue. The notication facility can notify a group of subscribers to
19736 - FAT: Add CONFIG_FAT_LFN_ALIAS_HASH to speed up creating long
19744 similar to what is used by Windows 2000 and later. From Petteri
19746 - FAT: Add CONFIG_FAT_LFN_ALIAS_TRAILCHARS alternative format for 8.3
19748 first 6 characters of long filename. If this option is set to N > 0,
19749 NuttX will instead take first 6-N and last N characters to form the
19753 - FAT: if block driver wait seems to be a long one, give time for other
19754 threads to run. From Petteri Aimonen.
19755 - file_open(): Add file_open() implementation with some fully-function,
19757 file_detach() in the OS to file_open(). From Gregory Nutt.
19758 - MX25LF25635F: Add support to Macronix MX25LF25635F serial NOR flash
19760 - nx_open(): Add nx_open() which is the same as open() except that it
19762 variable. Change most other, non-controversial calls to open() to
19764 - file_ioctl(): Replace calls to ioctl() in the OS to file_ioctl().
19766 - mount: Add mount() support for file systems that require MTD drivers
19768 - mount: Add support for mounting a file system with either a block or
19770 - MTD FTL: Support BIOC_FLUSH ioctl From Xiang Xiao.
19771 - MTD FTL: Make READAHEAD and WRITEBUFFER work independently of each
19775 - MTD FTL: Allocate eblock only when it's really needed From Xiang Xiao.
19776 - MTD FTL: Add support support unlink operation to avoid the memory
19778 - MTD Partition: Add register_mtdpartition() for MTD partition From
19780 - MTD Partition: Remove the hard code partition name length From Xiang
19782 - MTD Proxy: Make MTD device accessible via a character driver proxy
19784 - ProcFS: Change output of the ProcFS 'env' file so that it looks more
19786 - ProcFS: Add support to provide MLD statistics at /proc/net/mld. From
19788 - ProcFS: Remove MTD ProcFS and mtd_procfsoperations() since we can now
19790 - ProcFS: Add /proc/version support to get version info From iuhaitao.
19791 - ProcFS: Add support for named MTD drivers in the pseudo file system.
19792 This will, eventually, allow us to mount file systems that need MTD
19793 drivers without having to fake an intervening block driver.
19794 - R/W Buffer: Don't queue work to flush write buffer if
19796 - R/W Buffer: Improve the rwb_read/write overlap performance From
19798 - SIM HOSTFS: Support S_IFSOCK, DT_LNK, O_DIRECT and O_SYNC From Xiang
19800 - SPIFFS: Brings in a NuttX port of version 0.3.7 of Peter Anderson's
19805 - Network Configuration Add new configuration CONFIG_NET_MCASTGROUP.
19810 - Network Device: Add notification logic for the case where the network
19812 - Network Device: Rename netdev_dev_lladdrsize() to netdev_lladdrsize()
19813 and move the prototype to include/nuttx/nex/netdev.h, giving is global
19815 - ARP: Redesign ARP table aging to simplify the net initialization
19817 - ARP: Check ifname match before sending packet. From Xiang Xiao.
19818 - ARP and ICMPv6: Double the delay time on each iteration for ARP/ICMP
19819 to fight work jitter better. From Xiang Xiao.
19820 - ICMP/ICMPv6: Add NET_ICMP[v6]_NO_STACK for usrsock case From Xiang
19822 - ICMPv6: Encapsulate the link scope address generation into
19824 - ICMPv6: Remove the coupling between ICMPv6 and Ethernet by moving all
19825 Ethernet stuff to neighbor_ethernet_out.c and make the mac address as
19827 - ICMPv6 MLD: Implement Multicast Listener Discovery (MLD) protocol based
19829 - ICMPv6 MLD: Implement MLDv1 compatibility mode. From Gregory Nutt.
19830 - ICMPv6 MLD: Implement 'Other Querier Present Timer'. This timer is
19831 used to revert to Querier mode if there is no other querier on the
19833 - IGMP: Backport some MLD design improvements/fixes. From Gregory Nutt.
19834 - IPv4 setsockopt(): Add implementation for all IPv4 socket options that
19836 - IPv4/6 Socket Options: Add framework to support IPv4 and IPv6
19838 socket options was a necessary step on the way to ICMPv6 MLD support.
19840 - ICMPv6 Autoconfiguration: Don't take the network device down when
19842 Recommended by Xiang Xiao in order to avoid the long delays of
19844 network be in the "down" state when re-configuring the network
19845 interface. This is thought not to be a necessary here because: (1)
19852 - IPv6 Input: Add logic to skip over the variable number of IPv6
19856 have, at a minimum, a Router Alert Hop-by-hop extension header.
19857 Additional changes to ICMPv6, TCP, and UDP input to handle the offset
19859 - IPv6 Neighbor: Simplify the neighbor table aging process From Xiang
19861 - IPv6 Neighbor: Simplify neighbor_dumpentry() implementation From
19863 - IPv6 Neighbor: neighbor_lookup() checks if the target IP belongs to
19865 - IPv6 Neighbor: Support neighbor_out() for multiple link layer at the
19867 - IPv6 setsockopt(): Implement the IPV6_JOIN_GROUP and IPV6_LEAVE_GROUP
19869 - TCP: Extend the TCP notification logic logic so that it will report
19871 - SLIP: Add IPv6 support and fix minor issue From Xiang Xiao.
19872 - TCP: Add TCP poll() logic to receive notifications when IOBs are
19874 - TCP: In TCP backlog, add SOMAXCONN definition and implementation per
19876 - TCP/UDP: Extend send()/sendto() logic it also requires that at least
19877 one IOB is also available to be able to send. From Gregory Nutt.
19878 - TCP/UDP: Add notification logic when TCP or UDP read-ahead data is
19880 - TUN: Call ipv[4|6]_input dynamically by checking packet header and
19885 - Broadcom IEEE 802.11: Add capability for Broadcom chips to get
19886 firmware and CLM data from a mounted file system vs. in-memory data
19888 - XBee IEEE 802.15.4: Add support for setting/getting tx power. From
19893 - GPIO: Support multiple registrations of GPIO signal events. From
19895 - INA226: Add INA226 device driver. From Daniel P. Carvalho.
19896 - MAX7219: Support all digits presented in the MAX7219 datasheet. From
19898 - MLX90614: Add support for the Infrared Thermometer MLX90614 From
19900 - RTC Driver: up_rtc_set_lowerhalf call clock_synchronize() for
19902 - SYSLOG: Uncomment the g_syslog_channel->sc_flush call in
19904 - SYSLOG: syslog_initialize initialize dev/syslog too and call syslog
19905 to add the prefix and timestamp. From Xiang Xiao.
19906 - USB Composite and DFU drivers: Add support for Microsoft OS
19907 descriptors. These Microsoft-only descriptors help in loading the
19908 correct driver on Windows. They are especially helpful to give libusb
19909 access to a custom device without having to manually configure/install
19911 Windows 10 with dfu-util 0.9 and libusb 1.0.22. On Windows 7 it still
19912 appears to need driver installation. From Petteri Aimonen.
19913 - USB DFU Device: Add DFU Runtime driver for activating boot-loader
19915 - USB RNDIS Device: Account for CONFIG_NET_GUARDSIZE in allocation of
19918 - USB RNDIS Composite Device: Fix strid comparison. Add support for
19923 - PCBLOGIC-PIC32MX: Remove support for the PCB Logic PIC32MX board. I do
19924 not find any references to PCB Logic on the web and I do not believe
19929 - i.MXRT: Added support for the i.MXRT 106x family. From David Sidrane.
19933 - i.MXRT: Add LPI2C driver. From Ivan Ucherdzhiev.
19934 - i.MXRT LPSPI: Add full support for the LPSPI in poll mode; includes a
19936 - i.MXRT USDHC: Initial commit of the i.MXRT SDHC driver working in PIO
19938 - i.MXRT USDHC: Complete the interrupt driven USDHC1 functionality for
19944 - IMXRT1060-EVK: Add support for the IMXRT1060-EVK. From David Sidrane.
19948 - Olimex-LPC1766STK: Add support to initialize a USB HID keyboard. Add
19953 - LC823450: MPU support for FLAT build From Masayuki Ishikawa.
19957 - STM32: Add support for STM32F303xD/E. From Mateusz Szafoni.
19958 - STM32 L4: Add initial support for STM32L412 and STM32L422 chips From
19963 - STM32 ADC: Major refactor: Use STM32 ADC IP core version and ADC
19970 - STM32 PWM: Improvements in STM32 PWM low level driver: Support
19971 complementary outputs, dead-time configuration, output polarity and
19973 - STM32 PWM: Break and lock configuration and some cosmetics From
19975 - STM32 SPI. Enable separate DMA per SPI configuration From Daniel Agar.
19976 - STM32 F7 FLASH: Allow programming OTP blocks through progmem
19978 - STM32 H7 I2C: Add I2C support for STM32H7. From raiden00pl.
19979 - STM32 H7 RCC: Update RCC definitions, add SPI clock configuration and
19981 - STM32 H7 SPI: Add basic SPI support for H7. Enable SYSCFG clock in
19986 - Nucleo-F302R8: Add support for Nucleo-F302R8 board From raiden00pl.
19987 - Nucleo-F302R8: Add PWM support. From Mateusz Szafoni.
19988 - Nucleo-F303ZE: Add basic support for nucleo-f303ze. From Mateusz
19990 - Nucleo-F303ZE: Support for ADC and ADC example. From Mateusz Szafoni.
19991 - Nucleo-L432KC: Added support for AT45DB Serial Flash From Daniel P.
19993 - Nucleo-L432KC: Add support for the INA226. From Daniel P. Carvalho.
19994 - Nucleo-H743ZI: Add NRF24L01 support. From Mateusz Szafoni.
19995 - Olimex-STM32-P407: Add a HID keyboard configuration. From Gregory
19997 - STM32F4-Discovery: Add MLX90614 support for the STM32F4-Discovery
19999 - STM32F429I-DISCO: Add PWM support. From Mateusz Szafoni.
20000 - STM32F429I-DISCO: Support for ADC and ADC example. From Mateusz
20005 - MIPS32 Toolchain.defs: Add toolchain flags for the pinguino toolchain
20008 * RISC-V:
20010 - RISC-V GAP: This commit brings in support for the GAP8 architecture.
20011 The GAP8 is a 1+8-core DSP-like RISC-V MCU. Also included is support
20016 - tools/tesbuild.sh: No longer installs and builds the NxWidgets
20021 - include/net and include/sys: Align the constant values with values in
20022 the Linux kernel which makes targeting the usrsock server to Linux
20024 - include/netdb.h Add NO_ADDRESS definition From zhangyuan7.
20025 - include/netinet/in.h: Adds definitions for IPPROTO_IPV6 socket
20026 options to netinet/in.h. Adds missing fields to sockaddr_in6. Adds
20027 struct ipv6-mreq. These changes all follow the opengroup standard for
20029 - include/netinet/in.h: Add IPv4 SOL_IP socket options for symmetry
20032 - include/netinet/in.h: Add other definitions required by
20034 - include/netinet/in.h: Add Linux IP_PKTINFO and IPV6_PKTINFO
20036 - include/nuttx/net/ipv6ext.h: Create header file with all of the
20039 - include/nuttx/net/mld.h: Add MLD header file based on RFC2710 and
20041 - include/sys/socket.h: With increased size of struct sockaddr_in6, the
20046 - libs/libc/misc: Add implementation of CRC8-CCITT. From Alan Carvalho
20048 - libs/libc/modlib: Add per-module library symbol table support. From
20050 - libs/libc/net: Add basic implementation for recvmsg() and sendmsg()
20052 - libs/libc/netdb: A few improvements to getaddrinfo: (1) Use the
20055 - libs/libc/netdb: Make DNS receive timeout configurable. From ligd.
20056 - libs/libc/stdio: Eliminate recursive in conversion functions of
20058 - libs/libc/string: Add some new functions defined in POSIX.1-2017:
20060 - libs/libc/string: Add memrchr() function From Xiang Xiao.
20061 - libs/libc/string: Make strerror() return the string "Success" for
20066 - Makefile.unix/win: Remove deletion of Eclipse project files from make
20068 - apps/Application.mk: Fix some build issues. (1) Unable to found
20069 target 'context' when CONFIG_NSH_BUILTIN_APPS disabled. (2) Unable to
20071 - apps/Directory.mk: Fix distclean targets. Makefiles were not
20072 removing generated Kconfig files. There was then no way to remove
20078 - apps/nshlib/, apps/examples/: Update to show newer file system
20080 - apps/nshlib: Add support for the 'env' command. From Gregory
20082 - apps/nshlib: Add support for NSH local variables if
20084 are local to NSH. The importance of this is that these variables
20087 to an environment variable and will then be inherited by any tasks
20089 - apps/nshlib: If CONFIG_NSH_VARS=y, the NSH 'set' command with no
20095 - apps/examples/gpio: Align with GPIO driver update From wangyanjiong.
20096 - apps/examples/ina226: Added INA226 example From Daniel P. Carvalho.
20097 - apps/examples/mld: Add a test of MLD. Provides a mechanism for some
20098 low-level bring-up of MLD. From Gregory Nutt.
20099 - apps/examples/mlx90614: Add mlx90614 test example From Alan Carvalho
20101 - apps/examples/mlx90614/: Include support to change device address on
20103 - apps/examples/fstest: Adapt the existing fstest example for SPIFFS:
20106 logic to dump logic content of SPIFFS. Ignore EINTR errors while
20107 reading or writing. Add configuration option to customize stack
20110 - apps/examples/tcpblaster: Add an option to use poll() to pace input
20112 - apps/examples/tcpblaster: Select CONFIG_LIBC_FLOATINGPOINT
20115 - apps/examples/udpblaster: Add option to use poll() on output (only).
20120 - apps/system/ping and apps/system/ping6: Set optind to zero in the
20122 -W <timeout> and -s <size> option. Decouple the output from ping
20124 - apps/system/ping and pings and apps/netutils/ping: Extract icmp ping
20125 and icmpv6 ping6 logic from system/ to C-callable library in
20127 - apps/system/progmem: Remove this utility. It makes illegal direct
20132 - apps/netutils/netlib and apps/examples/igmp: Adapt to use the
20133 corrected, semi-standard version of struct ip_msfilter. From Gregory
20135 - apps/netutils/chat and apps/examples/chat: 'constify' chat variables
20140 - apps/wireless/ieee802154/i8sak: Properly shuts down event thread.
20142 - apps/wireless/ieee802154/i8sak: Fixes i8sak name. Accidentally renamed
20143 to i8ask in recent changes From Anthony Merlino.
20144 - apps/wireless/ieee802154/i8sak: Adds support for getting/setting
20149 - apps/graphics/NxWidgets: Move the NxWidgets repository into the apps/
20155 - apps/graphics/NxWidgets: Add CNxString string + operator and
20156 ::format() function. Add CNumericEdit option to include unit name
20159 - apps/graphics/NxWidgets: Add CLabelGrid control for displaying text
20168 - Clock: Remove g_monotonic_basetime and g_clock_monotonic_time since
20172 - Clock: Don't call up_timer_gettime in clock_gettime() and
20173 clock_systimer() to ensure the return value from them consistent with
20175 - Clock Initialization: clock_inittime() needs to be done with
20179 - IOBs: Work around some issues with the IOB throttle semaphore. It
20181 it seems to get outside of its range occasionally. Need to REVISIT
20183 - IOBs: iob_navail() was returning the number of free IOB chain queue
20186 - PM: Use the start time of state btime to calculate thrcnt; remove the
20188 - PM Uninitialization: Fix pm_domain_s.stime un-initialize caused time
20190 - sched_kfree() and sched_ufree(): This patch prevent heap corruption
20192 change forces all de-allocations via sched_kfree() and sched_ufree()
20193 to be delayed. Eliminating the immediate de-allocation prevents the
20194 problem with the the re-entrant semaphore because the deallocation
20197 - sigsuspend(): sigsuspend() shouldn't eat the pending signal but
20199 - task_restart(): Was restarting tasks with all signals set in the
20202 - unsetenv(): Fix and error in unsetenv() when un-setting the last of
20204 - waitpid(): Remove a bad error check. From Gregory Nutt.
20208 - FAT: Fix file data corruption in fat_truncate(). From Petteri Aimonen.
20209 - Partitions: Try MTDIOC_GEOMETRY IOCTL before bops's geometry.
20211 - MTD Progmem: Change up_progmem_npages() to up_progmem_neraseblocks().
20215 changes up_progmem_npages to up_progmem_neraseblocks.
20216 up_progmem_eraseblock erase a block. so it's better to return the
20218 - R/W Buffer: Fix a lock issue From Xiang Xiao.
20219 - SmartFS: Current sector should have a space for next entry size. If
20220 not, we should move to next sector. From EunBong Song.
20224 - 6LoWPAN: Fixes bug in uncompress_addr handling of odd postfix. This
20226 used an odd postfix. The odd byte needs to be handled first, not
20228 - ARP and ICMPv6: Don't call d_txavail directly since it may point to
20230 - ICMPv6: icmpv6_neighbor() shouldn't use the out of scope
20232 - IPv6 input: Fixes logic in ipv6_input to handle more than ff02::/16
20235 - IPv6 Input: Fix a logic error when the received IPv6 srcaddr is a
20239 - TCP: In TPC recv window calculations, in order to receive data we
20243 experimental fix to a performance problem noted by Masayuki Ishikawa.
20245 - TCP: Fix compiler error and warning when CONFIG_NET_SENDFILE=y From
20247 - TCP Input: Fix recovery when ackseq > unackseq. The comment near
20249 bytes". However, the code actually resets the whole TCP connection.
20250 It was changed to the current form in commit f034d84ea1f with no
20251 explanation of the intent. Recover the line to what it was before that
20253 - TCP Write Buffering: Fix buffer release handling on failed buffer
20254 allocation. Attempt to release write buffer on failed TCP write I/O
20255 buffer alloc and tryalloc failed to wrb->wb_iob assertion. From Harri
20257 - TCP/UDP: In the POLLOUT poll logic, request an immediate Tx poll from
20258 the network device bound to the socket. From Gregory Nutt.
20259 - UDP: On a failure to find the destination device, fallback to
20263 - USRSOCK: Revert previous commit to re-allow combination of usrsock
20264 and NuttX TCP/IP stack. For example, in case device has Ethernet and
20265 mobile connectivity and NuttX TCP/IP stack is used when configured to
20266 use Ethernet connection and usrsock when configured to use modem
20267 (modem TCP/IP stack through usrsock). From Jussi Kivilinna.
20268 - USRSOCK accept(): Mark newconn ready before issue accept request to
20269 avoid the case that the request is discarded due to the socket being
20274 - Broadcom 802.11 Driver: There were two functions that have a address
20278 - Broadcom 802.11 Driver: Remove incorrect OR condition. Always true.
20280 - NRF24L01: Fix compilation errors. From Mateusz Szafoni.
20284 - ALARM Upper Half: Fix alarm ISR error when no CONFIG_SCHED_TICKLESS
20285 drivers/timers/arch_alarm.c: Use uint64_t to avoid alarm 32-bit
20287 - MAX11802: Fix compilation errors and allow setting PULL and SAMPLE
20289 - S25FL1: During a MTDIOC_GEOMETRY ioctl call, the driver was
20290 incorrectly reporting the blocksize to be the same as the erasesize.
20293 - SYSLOG: nx_syslog's return value should include the timestamp length
20295 - SYSLOG: syslog_putc() calls sc_force in idle task even if interrupt
20298 case runs in the idle task context, so it's difficult to debug the
20301 - SYSLOG: Ensure interrupt log doesn't interlace in normal log. Don't
20303 to empty the interrupt buffer every time. From Xiang Xiao.
20304 - UART 16550: Fix UART flow control issue. UART_MCR_RTS need be high
20306 - USB RNDIS Device: Fix buffer overrun check in rndis.c. The rndis
20309 TCP packet is divided into smaller ones based on USB max packet size,
20312 * ARMv7-A:
20314 - ARMv7-A: Replicate the same fix was previously committed for the
20315 ARMv7-R. From Gregory Nutt.
20317 * ARMv7-R:
20319 - ARMv7-R: Fix error in cp15_flash_dcache. Change mcrne to mcr for
20322 * ARMv7-M:
20324 - ARMv7-M Interrupts: Correct all ARMv7-M architectures. Interrupts
20325 were not be disabled correctly on power up. Writing zero to the NVIC
20326 SET-ENABLE registers has no effect. In order to disable interrupts,
20327 it is necessary to write all ones to the NVIC CLEAR-ENABLE register.
20332 - BCM2708 Serial: Juha Niskanen's fix related to STM32
20333 CONFIG_SERIAL_OFLOWCONTROL also applies to cloned logic in BCM2708.
20338 - Qemu i486: Correct .bss, IDLE stack, heap organization. From Gregory
20343 - LPC43 Ethernet: Fix Ethernet TX_EN pin definitions. TX_EN on LPC43xx
20345 P0.1 was hard-coded for MII and PC.4 was hard-coded for RMII. Also,
20348 - LPC43 Serial: Fix copy-paste error: g_usart1port->g_uart1port. From
20350 - LPC43 SDMMC: Fix the LPC43 family SDMMC card access: Clocks were
20355 - LPC43 SDMMC: Corrected a problem in lpc43_dmasendsetup(). There was
20359 - LPC43 SDMMC: With these changes the SDMMC card for LPC43 is now
20362 possible for data to still be in the FIFO (i.e. not have reached the
20363 card) when a next write is requested, so we need to wait for that to
20365 episode to the next, corrupting progress. Multi-descriptor DMA
20370 - Bambino-200E: Correct calculation of SDMMC clock configuration. The
20376 - Kinetis: Remove all attempts to reprioritize interrupts. From Gregory
20381 - Kinetis I2C: I2C On failed reset re-initialization I2C and clocking.
20383 subsequent transfers will not cause a hard-fault due to the clock
20384 being off. If that transfer fails it can try to reset again. From
20386 - Kinetis Serial: Juha Niskanen's fix related to STM32
20387 CONFIG_SERIAL_OFLOWCONTROL also applies to cloned logic in Kinetis.
20392 - i.MXRT Ethernet: The board would not come up if I ran Nuttx from cold.
20393 I dumped the PHY registers to see what the differences were and the
20397 - i.MXRT Ethernet: Fix a race condition in setting up the Ethernet Tx
20399 - i.MXRT Ethernet: Corrections for the i.MXRT Ethernet: (1) Now the
20400 Ethernet is completely re-initialized when an error occurs by means of
20404 anyway. (2) Explicitly sets the expected PHY address to zero (this
20405 could be moved into the config rather than searching for it which
20409 the PHY to be optional when a reset is needed. If a non-renegotiated
20410 reset doesn't result in good comms to the PHY then it'll automatically
20411 be escalated to a renegotiated one. (4) Only performs a reset for
20414 and might need to be revisited, but certainly the jabber errors don't
20416 anyway. (5) Re-loads the multicast table on reset. (6) Adds a bit
20418 - i.MXRT LPI2C: Fixes 2 bugs in the for IMXRT1050: (1) I2C time out and
20421 - i.MXRT LPSRTC: SVNC LPCR register bits 0 & 1 are NOT reserved and
20422 are, in fact, needed to enabled the SRTC. Now the SRTC is working.
20424 - LPC54 SDMMC: Add support for and SDMMC errata. It appears that now I
20426 to the card. From Gregory Nutt.
20427 - LPC54 SDMMC: Ported Dave Marples fixes LPC43 SDMMC to the LPC54.
20429 - i.MXRT WDOG: Typos in bit definitions, wdog registers are 16 bits,
20430 wdog update has to be within 255 clocks of unlock, define board
20435 - i.MXRT: clockconfig bug fix: Fixed logic that was not clearing bits
20438 defined PODF values to select clock. Only configure USDHC2 clocks
20443 - IMXRT1050-EVK: Previous committed implemented SPI-based MMC/SD card
20445 implementation of MMC/SD card support using the SDIO-based
20446 peripheral. This commit renames that atypical support to *mmcsd_spi*
20447 and conditions using the SPI-based support on CONFIG_MMCSD_SPI which
20453 - LC823450: Fix up_allocate_heap() in lc823450_allocateheap2.c. For
20461 - EFM32 Serial: Juha Niskanen's fix related to STM32
20462 CONFIG_SERIAL_OFLOWCONTROL also applies to cloned logic in EFM32.
20464 - EFM32 USB Device: The epin_configure() function used the same eptype
20471 - STM32* SPI: Don't rely on SPI_CR1_SPE to determine if peripheral has
20476 or not SPE is set) before the driver starts refusing to initialize.
20478 - STM32 F0, F7, H7, L4 Serial: Fix use of CONFIG_SERIAL_IFLOWCONTROL
20480 - STM32 TIM: Don't use hard-coded UIF interrupt in some functions.
20482 - STM32 (FS/HS), STM32F7, and STM32L4 OTGFS/HS Device: The
20486 - STM32 F2: Fixes Kconfig options to include all STM32F20XX processors,
20489 - STM32 F4 DAC: STM32F407VG has only one DAC. NDAC=2 causes
20490 compilation error when trying to use e.g. STM32_DAC1_CR macro. From
20492 - STM32 F7 Serial: Force invalidation of data cache after DMA re-enable
20493 when returning from low-power mode From Juha Niskanen.
20497 - B-L475E-IOT01A: Correct timer source clock frequencies. From Freemans
20499 - Nucleo-L432KC: Fix SPI pin definitions in board.h. From Daniel P.
20504 - CP0 Definitions: Fix some copy-paste errors that cause malformed
20507 - microMIPS: Reported by Anonymous in Bitbucket Issue #129: When MIPS
20510 initialization code there misses to set the config3ISAOnExc bit to 1.
20516 - PIC32MZ Startup: In pic32mz-head.S, initialize the global pointer in
20521 - PIC32MZ Serial: Fix a typo in assignment of TTYS0 to UART6 From Ouss4.
20525 - SIM Network Driver: Fix error 'invalid operands to binary &' From
20530 - Fix typographical error in endian.h and resource.h From anchao.
20531 - include/net/if.h: Adds extern "C" guard in include/net/if.h From
20533 - include/netinet/in.h: Per OpenGroup.org, type of sin_port in struct
20536 - include/nuttx: Fix definitions used to access OS functions within the
20542 - include/nuttx/clock.h: Fix uptime wrong if DEBUG_FEATURES and
20544 - include/nuttx/fs/fs.h: Fix some backward parameters in a new macro
20546 - include/nuttx/fs/fs.h: Register_mtddriver should depend on CONFIG_MTD
20548 - include/sys/socket.h: Renumber the socket types. They must begin at
20550 interfaces. For example, getaddrinfo() uses a socket type of zero to
20552 any-type-socket, but macOS uses SOCK_UNSPEC. NuttX will do the same.
20555 - libs/libc: Correct some errors in psignal() and stpncpy(). From
20557 - libs/libc/math: Add variable convergence in log() and logf() to avoid
20558 hangs caused by failure to converge for very specific input values.
20559 Also includes a small change to log() and logf() that improves
20561 - libs/libc/stdio: Fix conversion for format specifiers in sscanf() that
20565 impossible to convert input of form "1.1K" using format "%f%c". Fix
20568 - libs/libc/stdio: Remove CONFIG_NOPRINTF_FIELDWIDTH. That option
20571 non-standard. Removing this might break some of the tinier platforms
20572 but it is the best thing to do for long term maintenance for for
20574 - libs/libc/stdio: Update to vsprintf(). This resolves the integer
20578 - libs/libc/string: Correct the return pointer value from stpncpy() for
20580 - libs/libc/string: Fix strrchr() so that it considers null terminator
20582 - libs/libc/wqueue: Eliminate a race condition noted by Xiang Xiao.
20584 - libs/libnx/nxfonts: Fix kerning of 'I' in Sans17x22 font. From
20586 - libs/libnx/nxfonts: In nxfonts_getfont(), avoid unnecessary warnings
20588 - libs/libnx/mxmu: NXMU now re-validates window pointer for mouse
20590 events can be sent to the same window. However, if the window is
20594 - libs/libnx/nxtk: nxtk_bitmapwindow: Fix warning message when bitmap is
20595 fully off-screen. From Petteri Aimonen.
20599 - Fix issue with libcxx build. This was changed multiple times, but
20601 - configs/Makefile and tools/Config.mk: Move single file copy to the
20605 - tools/Config.mk and tools/Makefile.win: Force use 'cmd' for shell
20607 - tools/Directories.mk: Correct the path to the installed libcxx
20609 - tools/Makefile.win/unix: Staging directory (and its libraries) should
20613 - apps/Directory.mk: If the current directory contains a Kconfig file
20616 - apps/Makefile: Fix Windows native build patch extension. From Anatol
20621 - tools/Config.mk: Fix an error in RWILDCARD implementation From
20623 - tools/configure.c: Add missing '\n' in printf statement
20624 - tools/configure.c: Add missed -g option to getopt() string. From
20626 - tools/configure.c and tools/configure.sh: Fix Windows native
20627 pre-build kconfig-conf incompatibility. From Anatol Ivanov.
20628 - tools/csvparser.h: Extend MAX_PARMSIZE to 256. Fixes this issue:
20630 - tools/link.bat: Fix .fakelink creation. From Anatol Ivanov.
20631 - tools/mkdeps.c: Fix '\0' missing with MinGW. From Anatol Ivanov.
20635 - apps/nshlib: Correct maximum number of arguments that can be provided
20636 to the mksmartfs command. From Eunbong Song.
20637 - apps/nshlib: Add fflush to nsh_consolewrite(). This resolves this
20643 - apps/nshlib: nsh_catfile() should not append '\n' if the last char in
20645 - apps/nshlib: Fix warning g_oldpwd defined but not used
20646 [-Wunused-const-variable] in nsh_envcmds.c. From Xiang Xiao.
20650 - apps/examples/adc/Kconfig: CONFIG_BOARDCTL_ADCTEST does not exist
20652 - apps/examples/webserver/Kconfig: The webserver "app" allows for DHCP
20653 client to be enabled. However, the Kconfig infrastructure does not
20654 contain EXAMPLES_WEBSERVER_DHCPC config. Based on patch from
20655 "Anonymous" attached to Bitbucket Issue #130. From Gregory Nutt.
20659 - apps/system/hexed: Fix memory leak From zhuyanlin.
20660 - apps/system/i2c: Fix i2c_msg freq initialization problem. Typo
20663 - apps/system/system: Fix warning when passing argument 6 of
20665 [-Wincompatible-pointer-types] From Xiang Xiao.
20669 - Correct some network-related configuration variable names. All *_MTU
20670 defines were changes to *_PKTSIZE gut that was not reflected in
20672 - apps/netutils/netlib/netlib_parsehttpurl.c: Correct handling of long
20675 - apps/netutils/codecs: "dst" overflow protection when base64 string
20677 - apps/include/netutils/ipmsfilter.h: Eliminate error generated by bad
20678 pre-processor logic. From Gregory Nutt.
20682 - apps/graphics/NxWidgets: Fix garbage returned when
20687 NuttX-7.28 Release Notes
20688 ------------------------
20692 that release consists of two tarballs: nuttx-7.28.tar.gz and
20693 apps-7.28.tar.gz. These are available from:
20698 Both may be needed (see the top-level nuttx/README.txt file for build
20705 - Critical Section Monitor: Adds data collection logic in support of
20706 pre-task monitoring critical sections and pre-emption state. From Gregory
20708 - Critical Section Monitor: Add support for global pre-emption and
20709 global critical sections to monitor as suggested by Xiang Xaio. From
20711 - Interrupt Time: Measurement of interrupt handler duration used to
20713 Tickless timer to measure interrupt time. This change adds
20715 interrupt duration calculation to use the same high-resolution,
20716 platform-specific timer as is used with the Critical Section Monitor.
20717 This leads to two improvements: (1) You can now measure interrupt
20718 duration in non-Tickless mode, and (2) in either mode, the interrupt
20720 high-resolution timer and should, therefore, never be any discrepancy
20721 due to different clock sources. From Gregory Nutt
20722 - Context Switching Protection: Add debug assertions before each call
20723 to up_block_task() to assure that there is no attempt to block an
20725 - init Task: Allow the init task priority to be configurable. From
20727 - pthreads: Implement pthread_key_delete(). This involves some minor
20728 changes to the group data structure. From Gregory Nutt
20732 - ProcFS: Extended the process ID ProcFS output to show per-thread
20733 maximum time for pre-emption disabled and maximum time within a
20735 - NXFFS: Pass unrecognized IOCTL commands to the contained MTD
20737 - LittleFS: Adds an initial port the ARM mbed littlefs to NuttX. This does
20740 - AT25 MTD Driver: Added support for AT25DF081A serial flash chip.
20742 - MTD Configdata Device: Extends the MTD configdata device with the
20744 1. Configurable option to use named config items instead of enumerated
20746 2. Ability to iterate through the existing configdata items in the
20747 /dev/config device.
20748 3. Ability to "unset" a configdata item.
20749 4. Ability to perform "flash_eraseall" on the /dev/config device.
20754 - Telnet Driver: Add NAWS and poll interface to telnet for screen size
20759 - BLE HIC Core: Add second RX work function From Lwazi Dube
20760 - BLE IOCTL Commands: Add SIOCBTCONNECT and SIOCBTDISCONNECT ioctl
20762 - CC2564: Add cc2564 HCI UART driver. From Lwazi Dube
20766 - Sitronix ST7032i: Add support to Alphanumeric Sitronix ST7032i
20768 - NXP TDA19988: This commit brings in a complete, but untested,
20775 - crypto/aes.c: This change provides an improved AES cipher API in
20776 addition to the existing routines. The reasons for this new API are:
20777 1) better performance, giving the possibility to avoid re-setting-up
20780 related to storage and FTL. And 2) suitable for simultaneous use of
20783 is no need to change anything else right now. From Sebastien Lorquet
20787 - MMCSD SDIO: The mmcsd_sdio driver makes calls for dcache
20789 SDIO_DMARECVSETUP(). I changed the arch/arm/stm32f7 chips to use
20792 This commit includes additional changes to mmcsd_sdio.c. I
20793 created SDIO_DMADELYDINVLDT() (DMA delayed invalidate) to
20794 invalidate store-into mode dcaches after the DMA transfer. I
20797 non-cache aligned buffer invalidation errors (for my store-through
20799 for store-into mode dcaches.
20803 all the stm32f7 chips to select it. From Bob Feretich
20804 - SPI Lower Half Interface: Extend the HW features supported by SPI.
20807 - DS28E17 1-Wire Driver: Optimize I2C write followed by read to same
20809 - LMP92001: Add support for the TI LMP92001 Multi-channle DAC/ADC
20811 - EEPROM Character Driver: Add support to Microchip AT24CM02 From
20813 - Microchip MCP73871: Add support to Microchip MPC73871 Battery Charger.
20815 - MCP7941x: Add support for the Microchip MCP741x external RTC. From Ouss4
20816 - Sensirion SCD30: Driver for Sensirion SCD30 CO2 sensor. From Jussi
20818 - Sensirion SGP30: Driver for Sensirion SCD30 gas sensor. From Jussi
20820 - Sensirion SPS30: Driver for Sensirion SCD30 particulate matter sensor.
20822 - USB CDC/ACM Device: When implemented usb cdc on nrf52840, I found
20825 2. Low-water mask implement issue;
20826 3. Re-flush cdc buffer when enabling
20832 - Configuration System: Allow Penguino for windows for the Windows
20837 - MAX32660: Support for the MAX32660 was added (along with partial
20846 - MAX32550-EVSYS: Basic support for the Maxim Integrated MAC3X660
20848 fully functional. Includes unverified support for an SPI0-based
20853 - SAMD21/L21: Adds a complete ADC header file for SAMD21 and a partially
20855 - SAMD21/L21: Export sam_i2c_master_initialize(int bus) to be used by
20856 board config. From Alan Carvalho de Assis
20860 - PIC32MZ I2C: Add support for the I2C bus. From Ouss4
20862 * ARMv7-A
20864 - ARMv7-A MMU: Use TLBIMVA vs TLBIMVAAIS to invalidate the Cortex-A8
20867 * ARMv7-M
20869 - Cortex-M7 Cache: This commit adds a new function
20872 in cache that need to be invalidated. This new function could be
20875 - ARMv7-M: In the current implementation we only use very high
20876 priority interrupts (levels 0, 0x10 and 0x20 in CORTEX-M speak) but
20879 levels but have 'shifted' them to be based around the midpoint of the
20881 for interrupts to be defined above (or, indeed, below) them as needed
20883 existing code but adds in a clean capability to define higher
20888 - BCM2708: Remove all support for the BCM2708/2835. This was added
20895 - Raspberry Pi Zero: Remove the partial support for the Raspberry Pi
20902 - Improve LED handling #if~#endif in nrf52_autoleds.c and
20906 Add nrf52-generic
20908 Copy from nrf52-pca10040 to nrf52-generic
20913 - i.MXRT: Add PIT, GPT, and QIMER(TMR) header files From David Sidrane
20914 - i.MXRT: Add FLEXPWM. From David Sidrane
20915 - i.MXRT: Add ADC chip header From David Sidrane
20916 - i.MXRT Build: Include up_systemreset and up_stackcheck.c From David Sidrane
20917 - i.MXRT GPIO: Add GPIO Support Input daisy selection. From David Sidrane
20918 - i.MXRT Serial: Support independent input and output flow control. From
20920 - i.MXRT USB: Use single define for USB pin definitions. From David Sidrane
20921 - IMXRT106X: Add FLEXCAN3 to pinmux header file. From David Sidrane
20925 - IMXRT1050-EVK: GPIO device driver support added and tested by
20930 - LPC23450: Add support for SPI flash boot. Also, remove unnecessary
20935 - LC823450-XGEVK: Add linker script for SPI flash boot. From
20937 - LC823450-XGEVK: Enable NFS client for RNDIS configuration. Also, some
20938 stack size were adjusted to work with NFS From Masayuki Ishikawa
20942 - Critical Section Monitor: Add low level timer support for simulation. From
20947 - Configuration: Simplify ARM core selection logic From Mateusz Szafoni
20948 - Configuration: USB Host is an option. From David Sidrane
20949 - STM32 L0: Brings in initial support for the STM23 L0. From Mateusz
20954 - STM32 ADC: Configurable ADC DMA mode (one shot mode, circular
20956 - STM32 ADC: Start conversion on startup is now possible if TIM
20957 triggering selected. This can be useful to start ADC TIM conversion
20959 - STM32 DAC: Unified naming for DAC interfaces From Mateusz Szafoni
20960 - STM32 DMA: Add interfaces to interact with high priority DMA
20962 - STM32 DMA: Use STM32 DMA IP core version instead of chip family
20964 - STM32 DMA: Add support for DMA v1 CSELR support. From Mateusz Szafoni
20965 - STM32 HRTIM: Do not enable timers on startup if option from Kconfig
20966 selected and add interface to enable/disable timers. From Mateusz
20968 - STM32 PWM: Add timer enable/disable and frequency update to
20969 low-level ops. From Mateusz Szafoni
20970 - STM32 SPI: Implements the new deferred DMA trigger feature. From
20972 - STM32 F0 Build: Rename the stm32f0 directory to stm32f0l0 to make a
20974 the f0_ from the names in order to make them MCU agnostic. From
20976 - STM32 F0 GPIO: Add support for GPIO EXTI. From Mateusz Sfafoni
20977 - STM32 F2 FLASH: stm32_flash_writeprotect() supported the same for
20979 - STM34 F7 DMA: stm32f7 enable separate DMA per SPI configuration
20981 - STM32 F7 QEncoder: Ported the QEncoder from F4 to F7. From Eduard
20983 - STM32 F7 SPI: Port Dave Marples STM32 deferred trigger enhancement
20984 to the STM32 F7 SPI drivers. From Gregory Nutt
20985 - STM32 H7 SPI: Port Dave Marples STM32 deferred trigger enhancement
20986 to the STM32 H7 SPI drivers. From Gregory Nutt
20987 - STM32 L4 SPI: Port Dave Marples STM32 deferred trigger enhancement
20988 to the STM32 L4 SPI drivers. From Gregory Nutt
20992 - B-L072Z-LRWAN1: Add basic support for b-l072z-lrwan1. Nucleo boards
20995 - Nucleo-F103RB: Add board support. From Mateusz Szafoni
20996 - Nucleo-F103RB: Add ADC and PWM examples. From Mateusz Szafoni
20997 - Nucleo-F207ZG: Add board support. From Mateusz Szafoni
20998 - Nucleo-F207ZG: Add ADC and PWM examples. From Mateusz Szafoni
20999 - Nucleo-F302R8: Add high priority ADC interrupts example to the
21001 - Nucleo-F334R8: Add support for ADC injected sequence to the 'highpri'
21003 - Nucleo-F334R8: Add example for the SPWM generation (custom STM32 PWM
21005 - Nucleo-F767ZI: Use on board USB UART as default console. Board is powered
21007 it was set to use Arduino shield which developer may not have. From Phil
21009 - Nucleo-F767ZI: Add ethernet config based on nsh configuration plus
21010 stm32f769i-disco/nsh-ethernet. From Phil Coval
21011 - Nucleo-L073RZ: Add basic support for nucleo-l073rz. Nucleo boards
21014 - Nucleo-L152RE: Add board support. From Mateusz Szafoni
21015 - STM32F4 Discovery: Add timing support for the critical section
21017 - STM32F4 Discovery: If the Critical Section Monitor, modify the
21018 ITM_LAR register to assure that the DWT cycle counter is enabled.
21020 - STM32F4 Discovery: Add board support to display ST7032i From Alan
21022 - STM32F4 Discovery: Add loadable application build support in
21024 - STM32F4 Discovery: Update RNDIS configuration: (1) Add NFS and adjusted
21027 - STM32F4 Discovery: Update nsh configuration: (1) Add
21030 - STM32F429I-DISCO: Add high priority ADC interrupts example to the
21032 - configs/nucleo-l073rz: Support for nrf24l01. From Mateusz Sfafoni
21036 - CC13x0 family and CC13x2/CC26x2: Basic, minimal support was added
21037 for these two chip families. This is a Work-In-Progress: There is
21038 just enough logic in place to support a simple NSH configuration.
21040 TI ROM-based 'DriverLib'. As a result, the support is not fully code
21042 nearly identical to the CC13x2 is fragmentary. Stay tuned.
21047 - LAUNCHL-CC1312R1: Board support is available for the TI
21048 LAUNCHL-CC1312R1. That board support consists only of an unverified
21050 being is simply support the core architecture bring-up.
21054 - AM335x: Adds initial support for the TI AM355x family.
21055 - AM335x: Add minimal wdog logic needed to disable the watchdog timer.
21058 - AM335x: Switch to DMTimer2 for system tick generation. U-Boot does not
21059 enable DMTimer1ms clocks hence it is not possible to use it until
21064 - Beaglebone Black: Initial port for BeagleBone Black board support
21065 (TI AM335x family based on Cortex-A8). Includes a basic functional NSH
21070 - LM3S9B92: Add support for LM3S9B92. From Lwazi Dube
21074 - Tiva HCI UART: Port bluetooth HCI uart interface from stm32 to tiva
21079 - TM4C1294-Launchpad: Add IRQBUTTONS support to tm4c1294 launchpad.
21084 - tools/convert-comments.c: Add a tool to convert C++-style comments
21085 to C89 C-style comments. From Gregory Nutt
21086 - tools/detab.c: Add detab.c which will convert all tabs in a file to
21088 - tools/lowhex.c: Add lowhex.c that will convert hexadecimal constants
21089 in a file to use lower case representation. From Gregory Nutt
21090 - tools/mkconfig.c: Add definitions to distinguish between tristate
21092 - tools/nxstyle.c: Add logic to detect long lines. From Gregory Nutt
21093 - tools/nxstyle.c: Add -h for help. From Gregory Nutt
21097 - include/nuttx/lcd/edid.h: Add EDID definitions From Gregory Nutt
21098 - libs/libc/netdb: Make DNS retries configurable From Juha Niskanen
21099 - libs/libc/netdb: Harden query logic against DNS spoofing. This
21106 - libs/libc/netdb: Support multiple IP addresses per hostname From
21111 - apps/nshlib: Add support to use SLCD as NSH Console From Alan Carvalho de
21113 - apps/nshlib: Add support for CROMFS start-up script. From David Sidrane
21114 - apps/nshlib: Add var expansion in NSH parse. From Daniel Agar
21115 - apps/nshlib: Display built-in apps using multi-column mode like the NSH
21117 - apps/nshlib: In all multi-column help output, calculate an optimal column
21118 width rather than using a hard-coded width that may or may not be
21121 - apps/nshlib: Adds addroute command options for setting default gateway.
21126 - apps/examples/battery: Add Battery Charger Monitor Example From Alan
21131 - apps/system/configdata: Adds an "cfgdata" command which allows
21132 manipulation of the /dev/config items via the command line. One such use
21133 for this utility would be to set a "macaddr" configdata item, etc. The
21134 utility is sort-of like a u-boot env variable edit function:
21136 For instance, to set a "macaddr" when the new CONFIG_MTD_CONFIG_NAMED
21149 You can also display all config items:
21157 - apps/system/critmon: Add a daemon to monitor critical section usage. From
21159 - apps/system/nsh: Set NSH priority if the NSH task was scheduled at a
21161 - apps/system/nxplayer: Introduce CONFIG_NXPLAYER_MAINTHREAD_STACKSIZE. From
21163 - apps/system/termcurses: Addition of termcurses libraries in
21165 - apps/system/vi: New feature additions
21166 1. Vi startup feature to prepend the current working directory to the
21169 without needing to fully qualify the filename.
21172 3. Moving into insert or append mode now prints '--INSERT--' in the
21174 4. Integration with termcurses to detect special keystrokes and to
21176 print codes to termcurses equivalents.
21177 5. Support for up, down, left, right arrows, page-up, page-down keys in
21179 6. Added 'b' command to move cursor 'b'ack to previous word. Honors the
21181 7. Added 'w' command to move cursor to next 'w'ord. Honors the command
21183 8. Added 'f' and 't' commands to find characters on the current line.
21185 9. Added the find 'n'ext command to repeat the previous find operation.
21186 10. Added the 'H', 'M', and 'L' commands to move the cursor to top,
21188 11. Extended yank/paste to manage a paste buffer with character mode in
21189 addition to line mode. Character mode allows cut / paste of
21195 14. Added support for the 'D' and 'C' delete and change to end of line
21198 16. Modified yank / paste allocation scheme to avoid repeated alloc and
21210 and END. Using these will cause the command repeat buffer to reset
21213 24. Added "gg" go to top of document command sequence.
21214 25. Added "ZZ" save and quit command (equivalent to :wq).
21215 26. Implemented '^' goto first non-whitespace on current line, along with
21216 '+' and '-' goto first non-whitespace on next / previous line.
21217 27. Added CR / LF goto first non-whitespace on next line in command
21222 - apps/netutils/webserver: The webserver/httpd app is was broken when script
21224 has been tracked down to the "Content-length" not being available ahead of
21225 time in this case (length of -1 passed to send_headers() ). On the other
21226 hand, the server closing the socket does not result in FIN being sent to
21229 Simple solution: Add support for HTTP Chunked Encoding to webserver/httpd.
21230 The change is simple. It adds a configuration option to enable chunked
21231 encoding. When enabled, the implementation will auto-detect the cases where
21241 - apps/wireless/bluetooth/btsak: Add connect and disconnect commands to
21246 - apps/graphics/pdcurs34: Integration of termcurses into pdcurses, plus
21247 pdcurses updates for multi-thread support From Ken Pettit
21248 - apps/graphics/pdcurs34: Adds a configuration option to pdcurses to enable
21249 line-drawing character (ALTCHARSET) when using the short 16-bit chtype.
21250 This is done by limiting the characters to 7-bit ASCII values and using the
21251 8-th bit as the A_ALTCHARSET bit. This allows a significant RAM savings 4K
21252 - 20K depending on terminal size) while still allowing the nicer
21253 line-graphic characters for border drawing. From Ken Pettit
21257 - apps/testing/ostest: Add test for pthread-specific data. From Gregory
21266 - Assertions: Identify the running task correctly when dumping task
21267 state information. It takes time to switch to the target task after
21270 due to the difference between the real running task and the return
21272 g_running_task to track the real running task through the context
21274 - Assertions: Correct duplicated logic from commit
21276 is not a valid way to test for the IDLE task in all configurations!
21281 mode to find the right stack for the CPU IDLE thread and could still
21283 - Interrupt Prioritization: Remove all driver-specific logic that may
21284 set the interrupt priority to anything but the default. There is no
21285 good reason to change the interrupt priority unless you just want to
21286 debug a difficult problem. OR if you want to use high priority
21288 to be set by board-specific logic. From Gregory Nutt
21289 - Memory Management: Revert "This patch prevent heap corruption as in
21290 below case." This solution to the problem noted by EunBong Song
21291 results in major memory fragmentation and out-of-memory
21295 memory until failures and bad behaviors begin to occur. From Gregory Nutt
21296 - Memory Management: This is a replacement for EunBong Song's reverted
21297 change. This change adds (1) logic in getpid() to return an error instead
21302 non-running task be trying to get the MM semaphore? I think only in the
21305 bad consequences to memory usage. From Gregory Nutt (with corrections
21307 - Memory Management: In implementation of calloc(), verify that the number of
21311 - sigtimedwait(): Remove unnecessary disable of pre-emption. From
21313 - _exit(): Update all architecture-specific _exit() implementations
21317 uses this instrumentation to track the state of critical sections.
21319 - sched_foreach(): sched_foreach() should not have to hold the
21321 to simply only the critical section while one entry is being
21324 - task_spawn(): Correct description of input parameters to
21329 - crtypo/: This change:
21334 is now responsible to ensure the AES hardware is initialized before
21335 first use. This applies to lpc43xx, stm32 and sam34.
21344 - opendir(): Corrects a problem with opendir() noted by Petteri
21357 ( '.' ) were appended to the pathname." So for mount points,
21358 opendir() works correctly, but for FAT32 filesystem it fails to open
21362 in NSH (like 'ls -R /') because NSH contains logic to remove trailing
21364 - dup()/dup2(): dup() and dup2() were broken some time back.
21367 - ProcFS: Remove the unnecessary critical section From Xiang Xiao
21368 - CROMFS: Fix hardfault. From David Sidrane
21369 - SmartFS MTD Driver: Fix smart_write_alloc_sector sector size mapping.
21373 - AT25 MTD Driver: Fixed missing opening parenthesis. From Marc Rosen
21374 - MTD Configdata MTD Driver: Check return value mtdconfig_readbytes().
21376 - S25FL1 MTD Driver: Minor change for the s25fl1 QSPI FLASH driver which
21381 - All network drivers! Change pre-processor logic that selects the
21382 high priority work queue or gives preferential treatment to the high
21385 - Socket Clone/Dup: On a failure to start the TCP monitor, the cloned
21386 socket is closed but is not properly freed, leaving it attached to a
21387 TCP connection structure with the wrong reference count. From
21389 - ARP: Fix whitespace after ARPHRD_IEEE80211 in ARP header file. From
21391 - 6LoWPAN: Fixes decompression of ipaddr from MAC address. The logic
21392 used to populate the IP from the radio address should match
21394 - 6LoWPAN: Fixes logic surrounding the Universal/Local bit. This bit
21396 bit is bit 1 of the MSB of the EUI-64. It should only be inverted in
21397 cases where there is a full EUI-64. In cases where the IID is derived
21398 from say, a short address, this bit should be forced to 0, indicating
21400 https://tools.ietf.org/html/rfc4291#section-2.5.1
21401 https://tools.ietf.org/html/rfc4944#section-6
21402 https://tools.ietf.org/html/rfc2464#section-4
21404 - 6LoWPAN: IEEE802.15.4 stores and uses addresses in little endian
21406 - 6LoWPAN: Address comment regarding avoiding double lookup of address
21408 - 6LoWPAN: Record and restore d_buf on entry/exit of sixlowpan_input.
21409 This avoids an issue where d_buf gets set to NULL by 6LoWPAN, and
21411 before getting set back to the drivers internal buffer. From Anthony
21413 - 6LoWPAN: sixlowpan_input should always return 0 if the incoming frame was
21415 - TUN Driver: Fixes a problem reported by Masayuki Ishikwawa: Recently I
21416 noticed that ARP response packet is corrupted when I tried to run
21420 - Telnet Driver: Add missing logic to set read event flags in poll()
21425 - BLE: Fix uninitialized variables. From Lwazi Dube
21426 - BLE GATT header file: Fix struct name. From Lwazi Dube
21427 - BLE GATT: Remove unnecessary GATT ioctls From Lwazi Dube
21431 - ST7032: Fix seek method. Was not taking into account the offset for the
21433 clobbering the filep->f_pos setting. From Gregory Nutt
21434 - PCF8574 Backpack: Fix seek method. Had the same problems as noted for
21439 - Button Upper Half: Fix two bad NULL checks From Juha Niskanen
21440 - PWM Interface: Remove dependency on CONFIG_PWM for the upper-half
21441 PWM header. This allows compilation for the lower-level PWM drivers
21442 even if the upper-half PWM logic is not used. From Mateusz Szafoni
21443 - Various I2C Drivers: In most I2C drivers, correct upper index value
21446 - Battery Gauge: Add missing initialization of semaphore. From Alan
21448 - Batter Charger: Add missing initialization of semaphore. From Alan
21450 - MCP73871: Fix Microchip MCP73871 Battery Charger driver to register
21452 battery_charger_dev_s' should be a pointer to operations structure. From
21454 - MCP794xx: Fix MCP794xx driver to wait for OSCRUN and fix tm_year. From
21456 - Numerous files: Fixes usage of CONFIG_BIG_ENDIAN; should be
21459 * ARMv7-A:
21461 - ARMv7-A MMU: Fix end address calculation for mmu_invalidate_region() API
21464 * ARMv7-M:
21466 - ITM: Fix missing space causing macro issues From Alan Carvalho de
21468 - Common Exception Handlers: This commit changes the lazy and non-lazy
21469 exception handler to remove a couple of cpsid instructions from them
21470 on ARMv7-m. If my understanding is correct then these interrupt
21476 - MPU/Protected Mode Build: Revert "arch/arm/armv7-m: MPU:
21481 1. The MPU region must be aligned to the base address of the memory
21483 That is, the following MUST always be zero: (base & ((1 << l2size) - 1))
21490 - PIC32MX Ethernet: Fix a comparison in a debug assertion. Should be
21495 - PIC32MZ chip.h Header: Add a missing " in an error message. From Ouss4
21499 - PIC32MZ Ethernet: Fix a comparison in a debug assertion. Should be
21504 - SAMD21/L21: Corrects behavior of the I2C_M_NOSTART flag. Also adds
21505 a release a bus on RXNACK and corrects typo priv->flags to msg->flags
21506 as priv->flags is never set. From Alexander Vasiliev
21507 - SAMD21/L21: Fix SAMD2L2 arch to use calibrated oscillator value. Now
21510 unless you don't want to use the crystal. From Alexander Vasiliev
21511 - SAMD21/L21 I2C Master: Adds calculation of a timeout and disables
21516 - SAML21-Xplained: Fix removed MAXCOARSESTEP from saml21-xplained board.
21521 - SAMD51/Ex: Alexander Vasiliev's fix to the SAMD21 I2C Master (commit
21523 applied to the SAMD51 I2C Master which is identical. From Gregory Nutt
21527 - SAMV7 Serial: Fix case where TTYS0 is not defined. From Ken Pettit
21531 - MAX326xx: WFI instruction in IDLE loop seems to interfere with
21532 stability. Commented out for now. Needs to be investigated further.
21537 - i.MXRT FLEXPWM: Correct duplicated definitions From David Sidrane
21538 - i.MXRT SERIAL: Fix TTYS0 defined definitions of higher numbered ports
21540 - i.MXRT LPSPI: Removed unused clock, that borked the build. From David
21542 - i.MXRT LPI2C: I2C Reset rework From David Sidrane
21546 - LC823450: Fix up_allocate_heap() in lc823450_allocateheap2.c. This
21549 - LC823450: Fix go_os_start() in lc823450_start.c. I found a bug in
21551 r1 to zero. This commit fixes this bug. Also, this commit fixes its
21553 - Other Architectures: Masayuki Ishikawa's change to go_os_start() was
21554 also to all MCU-specific start-up functions that support
21559 - LC823450-XEVK: Fix IOB params in rndis/defconfig. These parameters
21561 - LC823450-XGEVK: Change RNDIS MAC address assignment in rndis
21562 configuration. In previous implementation, mac[0] was assigned to
21563 0xaa for RNDIS host to avoid MAC address conflicts with RNDIS
21565 address generation on ubuntu16.04 or later which is inconvenient to
21568 - LC823450-XGEVK: Fix overlapped memory settings in memory.ld. From
21573 - STM32: Remove redundant STM32 family definitions from chip.h header
21576 - STM32 ADC: There is no DMA CFG bit for the basic IPv1 ADC. From
21578 - STM32 ADC: Refactor adc_reset. It should be easier to maintain this
21580 - STM32 F0 Clocking: Fixes the problem in GPIO port clocks. Only port
21583 - STM32 F7 I2C: I2C out of bounds access on priv->msgv. Error in if
21585 index 0 is valid on priv->msgv. Therefore random values in memory
21586 were used to set next_norestart. From David Sidrane
21587 - STM32 H7 I2C: Applied David Sidrane's I2C fix to the identical logic
21589 - STM32 L4 I2C: Applied David Sidrane's I2C fix to the identical logic
21594 - STM32 ADC: Fix RCC reset logic. From Mateusz Szafoni
21595 - STM32 ADC: Fix compilation errors for chips with one ADV TIM. From
21597 - STM32 DMA: Add missing DMA channel configuration.
21598 - STM32 PWM: STM32 MOE is not being appropriately handled for PWM for
21602 - STM32 PWM: Fix compilation errors if the upper-half PWM logic is not
21604 - STM32 SPI: STM32F446 & STM32F469 correct PC1 SPI assignments From
21606 - STM32 TIM: Fix compilation error if there is no TIM8. From Mateusz
21608 - STM32 F0: Fix GPIO EXTI lines assignment for STM32 M0. From Mateuz Szafoni
21609 - STM32 F3 I2C: Remove the extra NONE event from the trace dump
21611 - STM32 F4 I2C: Remove the extra NONE event from the trace dump
21613 - STM32 F7 I2C: Use clock_t for ticks instead of uint32_t to hold system
21615 - STM32 L4 I2C: Use clock_t for ticks instead of uint32_t to hold system
21620 - STM32F429I-DISCO: Fix lvgl demo removing STM32_FB_CMAP. From Alan
21622 - STM32VL Discovery: Fix SRAM and FLASH size in the linker script.
21626 - STM32VL Discovery: Fix memory size configuration and documentation.
21629 - Viewtool-STM32F107: Change RNDIS MAC address assignment in rndis
21630 configuration. In previous implementation, mac[0] was assigned to
21631 0xaa for RNDIS host to avoid MAC address conflicts with RNDIS
21633 address generation on ubuntu16.04 or later which is inconvenient to
21639 - Tiva LM/TM4C Start-Up: Remove option CONFIG_TIVA_BOARD_CLOCKCONFIG. It is
21641 inappropriate. Change tiva_clockconfig() to tiva_clock_reconfigure()
21642 then we can change up_clockconfig() to tive_clock_configure(). From
21644 - Tiva LM/TM4C GPIO Interrupts: Fix tiva gpio interrupts From Lwazi Dube
21645 - Tiva LM/TM4C: Improve GPIO interrupt support by removing unnecessary,
21646 hard-coded per-MCU defines and using the existing Kconfig configuration
21651 - Tiva TM4C Serial: After commit
21653 work - enter key produces garbage characters. This commit fixes the
21658 - include/dsp.h: Fix missing semicolon error in dsp.h From MYAPICI
21659 - include/nuttx/compiler.h: Correct support of C-version-specific features.
21660 Cannot depend on GCC version because -std=c89 may be used on comomand
21661 line. Need instead to use __STDC_VERSION__ to determine if a feature is
21664 - libs/libc/stdio: fread() should always set EOF if fewer than the
21670 - sched/irq/Make.defs: Fix warning about irq_csection.o appearing
21675 - tools/gencromfs.c: "gencromfs.c:1171:3: warning: ignoring return
21677 [-Wunused-result]. From David Sidrane
21678 - tools/gencromfs.c: Fix build on macOS. From David Sidrane
21682 - apps/nshlib: Fixes an error in the NSH parser. There was a bug when
21684 command in the script is executed, it sets the vtbl->np.np_redirect flag
21686 the script execution. Then the vtbl->np.np_redirect flag is set when the
21687 'sh' command completes, causing a restore from un-initialized variables,
21688 thus leading to a crash. See the code snippet below for an example test
21694 nsh> mkrd -s 1024 40
21696 nsh> mount -t vfat /dev/ram0 /tmp
21705 - apps/nshlib: Fix buffer overrun when redirected to a file. SAVE_SIZE
21710 - system/system.c: Fixes build error; There is no result variable, use
21712 - apps/system/vi: Bug fixes:
21715 2. Insertion of line above 1st line using 'O' caused line to be
21719 4. The cursor was not being bound to the line end and was allowed to
21720 'hover' over the '\n' EOL character. This caused wierd (relative to
21724 account when calculating 'curpos', 'prevpos' variables causing
21727 document instead of simply yanking to the paste buffer. Fixed.
21728 7. The 'dd'elete line funciton was not copying the deleted line to the
21734 preserved and moved further and further to the left column based on
21737 causing the responsiveness to be unbearable. Fixed. Added logic to
21738 dynamicall indicated which portions of the screen need to be updated
21739 (full display, current line to end of screen, current line only,
21742 at a time by calling the vi_putch() function, causing slow
21747 characters causing lines to be joined. This is different from
21750 13. When in 'ex' or find sub-modes (':' or '/' bottom line modes),
21751 hitting backspace with empty text did not return the operation to
21754 cursor position to the end of the file and did not wrap like in
21757 would force a call to 'vi_extendtext', marking the file as modified
21760 to save code space since they are nearly identical routines.
21763 simply moves the cursor left / to the previous line. Fixed.
21764 18. Added code to handle boundry conditions when the file is new and
21765 commands are applied to an empty file.
21766 19. Fixed vi_shrinktext so it doesn't allocate a zero-length buffer when
21768 20. The 'x' command was not copying to the paste buffer. Fixed.
21769 21. Fixed parsecolon routine to properly deal with ":wq" command sequence.
21774 - apps/wireless/bluetooth/btsak: 'bt bnep0 info' outputs a reversed addr. It
21777 - apps/wireless/bluetooth/btsak: Fix some errors in btsak. From Lwazi Dube
21778 - apps/wireless/bluetooth/btsak/btsak_main.c: Fix address parsing. From
21780 - apps/wireless/bluetooth/btsak: Remove unnecessary gatt get commands. From
21782 - apps/wireless/bluetooth/btsak/btsak_scan.c: Fix reversed address. From
21784 - apps/wireless/ieee802154/i8sak: Fixes issues related to re-running
21785 daemon. Releases lock when releasing daemon. Re-sets daemon_shutdown so
21789 NuttX-7.29 Release Notes
21790 ------------------------
21794 that release consists of two tarballs: nuttx-7.29.tar.gz and
21795 apps-7.29.tar.gz. These are available from:
21800 Both may be needed (see the top-level nuttx/README.txt file for build
21807 - Configuration: CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to
21810 - Rename most internal OS functions from sched_* to nxsched_* to
21813 - Rename all internal OS functions from task_* to nxtask_* to indicate
21815 - Rename sched_process_timer to nxsched_process_timer. Rename
21816 sched_timer_expiration to nxsched_timer_expiration. Rename
21817 sched_alarm_expiration to nxsched_alarm_expiration. Those are the
21820 - Standardize naming: Rename os_start() to nx_start(), rename os_smp*
21821 to nx_smp*, rename os_bringup to nx_bringup, rename all internal
21822 static functions to begin with nx_ vs os_. From Gregory Nutt.
21823 - Initialization: Remove the option CONFIG_BOARD_INITTHREAD. Now, if
21828 - Initialization: Add support for CONFIG_BOARD_EARLY_INITIALIZE. If
21829 this option is selected then nx_start() will call a board-provided
21831 up_initialize(). Rename board_initialize() to
21833 - Signal Delivery: Add a flag to the TCB to indicate that we are in a
21834 signal handler. Use this flag to assure that a there is never
21835 attempts to nest signal handling operations on a thread. This was
21836 guaranteed before but when locking of pre-emption during signal
21838 possibility of an attempt to do nested signal handling. This flag
21841 - Signal Handler Security: The architecture-specific signal handler
21847 - Timer Interrupt Procssing: Add a configurable call out to a
21848 user-provided function, 'timer hook', on each timer interrupt. From
21850 - PM Activity: Add pm_staycount() API for get stay numbers. This
21852 - Pthreads: Add support for pthread_mutex_timedlock From Leif Jakob.
21853 - Pthread Spinlocks: Add a very preliminary implementation of the new
21855 - Critical Section Monitor: Remove SCHED_IRQMONITOR_GETTIME to
21859 - Work Queue Notification: Notifier can now work with either lpwork
21861 - Protected Build: Add add a new field (us_heapend) to struct
21866 - Shared Libraries: Implement dlerror() using strerror(). From Xiang
21868 - Shared Libraries: Add LD_LIBRARY_PATH environment variable
21870 - ELF Loaders: Optimize elf load speed: (1) Don't zero out memory,
21871 (2) Reduce the initial buffer size to 32 bytes. From Xiang Xiao.
21872 - ARM ELF Relocation: Add support for the R_ARM_THM_JUMP11 relocation
21875 - ELF Modules: Add relocation buffer table to reduce filesystem
21877 - ELF Modules: Add symbol buffer table to reduce filesystem access.
21882 - Filesystem Mount: Move the union inode_ops_u i_mtd field into the
21883 mount section of inode_ops_u and remove the guard to simplify fs
21885 - ROMFS: Add support to mount a ROMFS volume using an MTD driver
21887 - LittleFS: VFS wrapper improvement: (1) Support block device
21889 support forceformat and autoformat option, (4) update file->f_pos
21890 and dir->fd_position, (5) remove the internal struct from dir, and
21892 - UnionFS: Support mount of UnionFS from the NSH command line. From
21897 - UsrSock: Add mutual exclusion so that only user can perform a
21899 - UDP: Initialize callback address structure to avoid random values
21904 - SX127x: Initial support for SX127x LoRA radio From Mateusz Szafoni.
21908 - Graphics: Fix a naming collision: Ye olde nx_start that started
21911 - NX Server Startup: Extend nxmu_start() so that receives a display
21912 number as an argument. This makes it possible to have multiple
21914 displays. Also includes updates to boardctl() to accept display
21916 - Graphics: nx_openwindow() and nxtk_openwindow() now accept an
21917 additional 'flag' parameter. This argument is current used only to
21918 select a RAM backed, per-window framebuffer. From Gregory Nutt.
21919 - Per-Window Framebuffers: Windows may now be optionally created
21931 are also suppressed: Changes to window position, size, etc. As a
21935 to use per-window framebuffers.
21939 - Driver Notifications: Support signal notification through
21941 RTC, Joysticsks, buttons, Zero-Crossing, wireless, FT80x, Timer,
21943 - Watchdog Driver: Support auto-monitor service From Gregory Nutt.
21944 - Timer and Alarm Drivers: Implement up_critmon_gettime and
21946 current_usec to infinite recursion. From Xiang Xiao.
21947 - RTC Driver: Protect the RTC state with a semaphore. From Xiang
21949 - Serial Upper Half: Call pm_activity() when characters are received
21951 - MPU60x0: Initial support for TDK InvenSense MPU6000 and MPU6050
21952 6-axis gyroscope and accelerometers. This commit supports SPI
21954 - EEPROM Driver: Add configurable SPI eeprom frequency. From
21956 - GPIO Driver: Support reading and writing gpio pins using cat and
21958 - MCP2515: Add MCP2515 clock input config to KConfig. From
21960 - MAX7456: Support for the Maxim MAX7456 on-screen-display chip.
21965 - boardctl(): up_testset() can now be accessed by applications via
21966 the boardctl() interface rather than attempting to call it
21970 - boardctl(): Add support for BOARDIOC_NXTERM which can be used to
21972 - boardctl(): Add boardctl() commands to replace direct calls to
21977 - PIC32MZ Timers: Add support for the PIC32MZ timers (driver,
21982 - arch/arm: Move FPU options to a common place and unify the usage
21984 - arch/: Unify the cache interface for all architectures that
21986 - ARMv7-M/A/R: Add a architecture-specific new barriers.h header
21991 * ARMv7-A
21993 - ARMv7-A: Support thumb mode and fix interworking issue. From
21995 - ARMv7-A: Add weak attribute to arm_data_initialize so platform
21997 - ARMv7-A: Add SCR bit definitions. From Xiang Xiao.
21998 - ARMv7-A: Add mmu_l1_map_regions() to remove the code duplication.
22000 - ARMv7-A: Add the initial cortex-a7 architecture support From
22003 * ARMv7-M
22005 - ARMv7-M: stackcheck allow faulting stack calculation to make it to
22010 - SAMD2/L2: Add RS485 support to SAMD2L2 serial. From Alan Carvalho
22015 - Minerva: Add support for the Minerva architecture. From Ramtin
22020 - misoc: Add support for an NSH configuration using the Verilator
22025 - NRF52: 1. Added 52840 family support 2. Use common IRQ and memory
22030 - NRF52 RNG: 1. added RNG device driver 2. added errdata to correct
22036 - i.MXRT XBAR: Add XBAR Support. From David Sidrane.
22037 - i.MXRT USB: Add USB analog header file. From David Sidrane.
22038 - i.MXRT OCOTP: Added OCOTP Support. From David Sidrane.
22039 - i.MXRT LCD: Adds framebuffer support for the i.MXRT 1050.
22040 Includes DCD initialization for SDRAM to provide space for the
22042 3-clause license. From Johannes.
22046 - IMXRT1050-EVK: Adds framebuffer support for the i.MXRT 1050.
22051 - LPC17xx: Add a configuration option to skip over the framebuffer
22052 when adding DRAM to the heap. From Gregory Nutt.
22056 - Open1788: Add a configuration to test NxTerms in the PROTECTED
22058 - Open1788: Re-arrange PROTECTED mode link map to make more space
22060 - Open1788: Add a configuration for testing per-window frame buffers
22065 - LPCXpresso-LPC54628/pwfb: Add per-window framebuffer configuration
22067 - LPCXpresso-LPC54628: Add a configuration for addition per-window
22072 - STM32F0/L0 SPI: Add SPI support for F0. From Mateusz Szafoni.
22073 - STM32 ADC, PWM and TIM: (1) configure injected channels external
22078 - STM32 DFU Mode: Add logic to reboot the STM32 in DFU mode.
22081 - STM32F7 LSE: Add configuration of LSE oscillator drive capability
22083 - STM32F7 I2C: Fix another memory access issue on a bus error. From
22085 - STM32F7 TIM: Add OUTTOGGLE mode for STM32f7 timer From Valmantas
22087 - STM32F7 Timer Lower Half: Add timer lowerhalf driver for stm32f7.
22089 - STM32F7 ITM: Add ITM syslog support. From Valmantas Paliksa.
22090 - STM32F7 CAN: Add CAN driver with support for three bxCAN
22092 - STM32F7 QSPI: Add stm32f7 Quad SPI support. From Valmantas Paliksa.
22093 - STM32L4 LSE: Ports Jussi Kivilinna's recent STM32F7 LSE change to
22095 - STM32H7 I2C: Apply David Sidrane's fix for the STM32F7 to the
22097 - STM32H7 DMA: Rename DMA1/2 IRQ names to match those from other
22100 definitions to match other STM32 ports. Enable clock for MDMA and
22104 domain; use 2 bytes to specify memory region. Add D1 domain core
22106 - STM32H7 OTG: Initial OTG support for STM32H7 and some minor
22108 - STM32H7 Build: Initial support for protected build mode. From
22110 - STM32L4 I2C: Apply David Sidrane's fix for the STM32F7 to the
22115 - B-L072Z-LRWAN1: Add SX127x configuration. From Mateusz Szafoni.
22116 - Nucleo-F091RC: Add support for SX127x radio. From Mateusz Szafoni.
22117 - Nucleo-F091RC: Add SX127x configuration. From Mateusz Szafoni.
22118 - Nucleo-F207ZG: Add support for USB and initialize CDCACM if
22120 - STM32F429I-DISCO: Add an apps/examples/examples/nxhello
22122 - Nucleo-F446RE: Add support for the Nucleo F446RE. From Sebastien
22124 - B-L072Z-LRWAN1: Use HSI as default clock source. From Mateusz
22126 - Nucleo-L073RZ: Add SX127x configuration. From Mateusz Szafoni.
22127 - Nucleo-L073RZ: Port button logic from nucleo-f072 which appears to
22129 - Nucleo-L432KC: Add support for I2C driver initialization. From
22131 - Nucleo-H743ZI: Add support for USB and initialize CDCACM if
22133 - OmnibusF4: Initial support for the OmnibusF4 family of flight
22135 rather a design spec that many product vendors adhere to. The spec
22141 non-upstreamed, bespoke port of NuttX. No code from those resources
22143 - OmnibusF4: Add MAX7546 support. From Bill Gatliff.
22147 - CC1312R1: Code complete and builds successfully. Stalled on
22148 further radio development. I planned to integrate the IEEE 802.15.4
22149 radio interface, but the Cortex-M0 interface is not available with
22154 - LaunchXL-CC1312R1: Add support for on-board LEDs and buttons. The
22155 LauchXL-CC1312R1 NSH Configuration is now fully functional. From
22157 - LaunchXL-CC1310: Clone LED and button support from the
22158 LaunchXL-CC1312R1. The number of LEDs and buttons as well as DIO
22163 - tools/rmcr.c: Add a tool to remove carriage returns and dangline
22165 - tools/nxstyle.c: Can now detect if the C comment closing is not on
22167 - tools/nxstyle.c: Make sure that all files begin with a comment on
22169 - tools/nxstyle.c: Add check for multiple definitions of local
22171 - tools/nxstyle.c: Beef up logic that detects multiple variable
22173 - tools/nxstyle.c: Add capability to detect CamelCase identifiers.
22175 - tools/nxstyle.c: Add logic to detect a blank line following a left
22177 - tools/nxstyle.c: Don't complain about certain lowercase characters
22178 in otherwise uppercase pre-processor identifers: IPv6, IPv4,
22180 was a bad idea to let the door open a crack for there. While they
22186 - Makefiles: Modify tools/Makefiles to add a "Do not Edit" warning
22191 - lib_vsprintf() (Nano): Add newlib-nano lib_vsfprintf has been
22197 https://salsa.debian.org/electronics-team/toolchains/newlib-nano.
22198 That project is GPL overall, but the newlib-nano printf portions
22201 - lib_vsprintf() (Nano): Added support for long lont types. From
22203 - lib_vsprintf() (Nano): Added hh type modifier (without extending
22205 - lib_vsprintf() (Nano): Adds configurable support for numbered
22207 - lib_vsprintf() (Nano): Cleaned naming and allow for leading zeros
22209 - lib_vsprintf() (Legacy): Add support for %g format which, for
22210 these purpose, is equivalent to %f except that trailing zeroes are
22212 - vscanf(): Moved vscanf logic to lib_sscanf.c Switched to stream
22216 - scanf() and fscanf(): Added scanf and fscanf based on enhanced
22218 - uname(): Add build date and time to uname output (like Linux).
22220 - strsep(): Add strsep BSD/Linux function. From Xiang Xiao.
22221 - netdb: Hostname support no longer depends on CONFIG_NET since the
22222 host name is also useful in the non-network environment.
22223 CONFIG_NET_HOSTNAME changed to CONFIG_LIB_HOSTNAME. From Xiang Xiao.
22224 - netdb: Support the nameserver change notification then we can pass
22225 DNS info from server to client in usrsock case. From Xiang Xiao.
22226 - include/fixedmath.h: Add macros for conversion between types
22228 - include/limits.h: Define NL_ARGMAX (as well as some of the other
22232 - linclude/limits.h: Add 'range 9 999999' to CONFIG_LIBC_NL_ARGMAX
22233 to Kconfig. Per OpenGroup.org, the minimum value for NL_ARGMAX is
22235 - include/nuttx/lcd/edid.h: Add extended EDID block IDs From
22240 - apps/: Follow up the kernel signal-related change in various files
22242 - apps/: Update for corrected name of standard header file. Should
22244 - apps/: The file system can no longer be disabled. Remove all
22247 - apps/: Remove/replace all conditional logic based on
22251 - apps/: Some updates due to NuttX renaming:
22255 - apps/: Graphics interfaces nx_openwindow() and nxtk_openwindow()
22260 - apps/nshlib/nsh_netinit.c: Update for changes to signal
22265 - apps/examples/ini_dumper: New example program. ini_dumper is
22268 - apps/examples/modbusmaster: Add Simple Modbus master example.
22270 easy to extend it to support Read/Write Input/Coils/etc.
22273 - apps/examples/pwfb: Added a test/example at apps/examples/pwfb
22274 that was used for initial testing of the per-window framebuffer
22276 - apps/examples/pwlines: Added another a test/example at
22278 per-window framebuffer feature. From Gregory Nutt.
22279 - apps/examples/sx127x: Add sx127x demo From Mateusz Szafoni.
22283 - apps/fsutils/inih: New package. inih (INI Not Invented Here) is a
22289 - apps/netutils/codecs/: Remove the big Base64 stack array. From
22291 - apps/netutils/codecs/: Add base64_[de|en]code_length() API From
22296 - apps/system/cfgdata: Make builtin task stack size and priority
22297 configurable. Set default to 2048 (from 1024) per recommendation
22299 - apps/system/embedlog: Update to version 0.4.0. From Michal Lyszczek.
22300 - apps/system/nxplayer and nxrecorder: Change 'int prio' to
22301 'unsigned int prio'. Required by changes to MQ function
22303 - apps/system/psmq: New package. psmq is publish subscribe message
22304 queue. It's a set of programs and libraries to implement
22305 publish/subscribe way of inter-process communication on top of
22307 - apps/system/zmodem: Switch to the raw mode before transfer and
22308 restore to the original setting after finishing the transfer. From
22313 - apps/testing/: Move all file system tests from examples/ to
22316 - apps/testing/cxxtest: Add a README file. From Gregory Nutt.
22317 - apps/testing/ostest: Add test of pthread_mutex_timedlock() From
22319 - apps/testing/ostest: Fix several errors in the setvbuf() test.
22321 - apps/testing/scanftest: Port of Greg King's scanf test
22326 - apps/tools/check-hash.sh: Add a tool check hash on downloaded
22335 - Signals: Restructure nxsig_deliver() so that the signal handler is
22336 not called with the pre-emption disabled (or, at least no with
22337 pre-emption disabled by nxsig_deliver() itself). From Gregory Nutt.
22338 - Critical Section Monitor: Move up_critmon_* to arch.h avoid the
22340 - Assertions: Architecture-specific assertion logic should dump CPU0
22343 - Message Queues: Change 'int prio' to 'unsigned int prio'.
22344 According to open group specification, priority field in mq_*
22348 - Timer Expiration: Fix macro SEC2TICK() 32-bits overflow by using
22350 - Kernel Memory Manager: In mm/kmm_heap/kmm_kernel.c, remove unused,
22352 - User Memory Manager: Ensure all user allocation try sbrk before
22354 - waitid(): Could exit without leaving critical section on some
22356 - IOBs: iob_allocwait() should decrease semcount manually. From
22358 - IOBs: iob_copyin() should wait for each buffer and adjust the
22359 return value of iob_copyin_internal return to simplify the code
22361 - IOB Notifier: Don't check iob_navail in iob_notifier_setup to
22363 - IOB Debug Dump: Format the whole line before log to avoid the
22365 - SHM: Convert bytes to pages by MM_NPAGES instead of MM_PGALIGNUP
22367 - SHM: shmget() should hould call shm_extend() to allocate the
22369 - Page Allocator: mm/pgalloc: shouldn't just allocate one page
22371 - Granule Allocator: Fix the wrong data in g_1bit_info and make the
22373 - srbk(): Fix a backward conditional test. Should call
22375 - sbrk(): Pass ARCH_HEAP_VEND as maxbreak argument From Xiang Xiao.
22376 - ELF Headers: Move elf related arch function to include/nuttx/elf.h
22378 order to avoid the conflict with the 3rd party libraries and clean
22383 - ELF Executables: If there is an address environment
22384 (CONFIG_ARCH_ADDRENV), binfmt/elf doesn't need to free ctor/dtor
22387 - ELF Configuration: Correct libcxx exception handling by
22388 introducing the generic config(CXX_EXCEPTION and CXX_LIBSUPCXX)
22390 - ELF Loaders: Call umm_initialize as soon as possible otherwise
22391 elf_loadctors/elf_loaddtors may fail to allocate memory. From
22396 - Crypto AES: After NuttX 7.28 crypto/aes.c would no longer
22401 - open(): Fix not returning failure for block_proxy() call. From
22403 - AIO: aio_cancel() needs to signal caller after success. Also fix
22405 - HostFS: Remove the unnecessary use of host_stat() in
22407 - LittleFS: Fix a minor issue found in code review: (1) Replace
22408 printf to finfo/fwarn/ferr, (2) Replace malloc/free to
22409 kmm_malloc/kmm_free, (3) define LFS_NAME_MAX to NAME_MAX, (4) Check
22411 - LittleFS: VFS Lookahead should use bit unit not byte unit. From
22413 - NxFLAT: Correct a double free debug assertion. This occurs when
22416 logic to free/unload the memory once and nullify the pointer so
22419 - NxFLAT: File descriptor leaks when nxflat loading fails. From
22421 - ProcFS: Fix typo in procfs uptime logic. From Sebastien Lorquet.
22425 - Network Configuration: The setup seems to support a network
22429 - Networking: The value ERROR should never be returned from internal
22430 OS functions. That is reserved for returning values to appliations
22433 - Networking: The struct in_addr doesn't have the member sin_addr.
22435 it calls from lib_lo_ipv4matchto() to lib_lo_ipv6match(). Also add
22437 - TCP (buffered) send: Fix assertion crash when window size is
22439 - ICMP/ICMPv6: Bind icmp callback from device to connection.
22442 - TUN/TAP Driver: Re-order all TUN/TAP driver state data. Not only
22443 was was with wasting memory due to alignement requirements, it was
22444 also causing network packet buffers to be improperly aligned
22445 causing problems because the network requires 16-bit packet buffer
22448 - TUN/TAP Driver: Packet buffer size should include the configured
22450 allocation size must be an even number of 16-bit values to preserve
22452 - Local Sockets: In local_connect(), initialize lc_result before
22454 - Local Sockets: Fixed deadlock issue by replacing nxsem_wait() with
22460 - NX Graphics: Remove naming associated with the now non-existent
22461 NXFE graphics layer: Rename nxfe_reportposition to
22462 nxmu_reportposition. Rename nxfe_redrawreq to nxmu_redrawreq.
22463 Rename nxfe.h to nxmu.h. Rename nxfe_state_s to nxmu_state_s.
22464 Rename nxfe_conn_s to nxmu_conn_s. From Gregory Nutt.
22465 - NxTERM: Remove the nxterm_unregister interface. The correct way
22466 to unregister a device is to unlink it. From Gregory Nutt.
22467 - NxTerm: Needs to clear display initially. Otherwise, garbage from
22470 - Font Cache: Fix a memory leak in the font cache. With a busy
22473 - Graphics: Nothing under graphics/ should set the errno. From
22475 - Graphics: Fix a coordinate system error in nx_filltrapezoid().
22476 When no clipping rectangle is falls, it falls back to use the
22483 - boardctl(): Fix compiling error when set
22488 - INA3221: Fix errors in INA3221 register field addresses and
22489 bitfield values. Signed value was losing its signed-ness due to
22491 - Serial Upper Half: Initialize OPOST and ONLCR in uart_register.
22493 - Serial Upper Half: Don't reset the circular buffer on close since
22497 - 16550 UART: Fix error: 'g_uart0port' undeclared. From Xiang Xiao.
22498 - 16550 UART: Fix typo for UART1 flow field initialization From
22500 - CDC/ACM HCD: Fixes to the IOCTL method in recovery of UART pointer
22501 and in names of Termios-related field. From xhbm.
22502 - USB Device: Fix type for USBDEV_TRACE_INITIALIDSET in Kconfig.
22504 - TCA64xx: Fix some errors in the TCA64XX driver. From Bruno
22506 - SYSLOG RAMLog: Fix error: Conflicting types for 'ramlog_addchar'
22508 - NRF24L01: Fix uninitialized irq_work which was causing a
22511 - MCP2515: Use kmm_zalloc to allocate device state structure. Fix
22516 - arch/ Common: Remove architecture-specific watchdog.h and
22517 arm-elf.h because they are empty. The arm-elf header file was
22520 - arch/ Common: Move up_pminitialize() after timer_initialize()
22522 - arch/ Common: Align semi-hosting call style with other syscalls in
22523 architecture-specific syscall.h. From Xiang Xiao.
22524 - arch/ Common: Every file that uses serial IOCTLs (TIOC*) must
22527 - arch/ Interfaces: Rename sched_process_cpuload to
22531 * ARMv7-A:
22533 - ARMv7-A MMU: Updating the cp15_wrttb and cp15_wrdacr functions to
22535 generating errors as ARMv7-a expects the MCR/MRC instructions to
22539 - ARMv7-A: Remove inclusion pg_macros.h for armv7-a since this
22541 - ARMv7-A: Guard some assembly files if configuration not selected.
22543 - ARMv7-A GIC: Fix assemble error when including gic.h From Xiang
22545 - ARMv7-A GIC: Don't use GIC_ICDDCR_ENABLEGRP1 for GIC NONSECURE
22548 * ARMv7-R:
22550 - ARMv7-R Syscall: In arch/arm/include/syscall.h, add missing
22551 inclusion of arch/armv7-r/syscall.h for Cortex-R. From Xiang Xiao.
22553 * ARMv7-M:
22555 - ARMv7-M Initialization: As noted by Roland Takacs in Bitbucket
22557 CONFIG_NETDEV_LATEINIT are selected. That was due in part to the
22559 !defined(CONFIG_NETDEV_LATEINIT) guard but did not add the guard to
22561 that the original intent of commit 19e16cb was to enable an
22563 rather to enable support of external Ethernet devices that may have
22565 fix to avoid the compilation error that can occur with this
22567 - ARMv7-M Configuration: ARCH_HIPRI_INTERRUPT shouldn't select
22572 - ARMv7-M Vector Table: Make the default NVIC_VECTAB_TBLOFF_MASK
22573 safer. The base address of the new vector table must be aligned to
22574 the size of the vector table extended to the next larger power of
22576 - ARMv7-M RAM Vectors: Correct bad NVIC_VECTAB_TBLOFF_MASK
22578 Raised DEBUGASSERT in armv7-m/up_ramvec_initialize.c line: 144.
22583 - ESP32 Timer ISR: Fix backward comparison. From Gregory Nutt.
22584 - ESP32 Serial: Fix some backward arguments. Correct 2-stop bit
22589 - SAMD2/L2 Serial: SAMD2/L2 serial driver. It needs
22590 sam_usart_enable(). to work From Alan Carvalho de Assis.
22594 - SAM3/4 Ethernet: Port Anthony Merlino's SAMv7 fix to similar
22599 - SAMv7 SPI: Fix DMA Tx/Rx timeout issue. From Kevin Liu.
22600 - SAMv7 QSPI: Compile error when set CONFIG_SAMV7_QSPI_DLYBCT.
22602 - SAMv7 Ethernet: The logic for determining the number of queues for
22604 queues from 3 to 6 at revision B, not just the SAMV71. From
22606 - SAMv7 Ethernet: Fixes rxdesc index logic to handle Buffer Not
22618 - SAMA5Dx Ethernet: Port Anthony Merlino's SAMv7 fix to similar
22623 - SAMA5D2-XULT: Move console from FLEXCOM4 to UART1. FLEXCOM4 does
22629 - i.MXRT Clock Configuration: If SDRAM is actived it was only
22636 - i.MXRT GPT: Correct register offsets. From David Sidrane.
22637 - i.MXRT TMR: Fix addressing and restructure using common offset.
22639 - i.MXRT ADC: Error in offset. From David Sidrane.
22643 - Teensy-3.x: Fix a mismatch in types in defconfig. From Gregory
22648 - LPC176x Clock Configuration: The code preserves undocumented
22649 reserved bits only if board does not set them to keep previous
22652 - LPC17xx Clock Configuration: The enable of EMC clocks has to be
22654 configuration has to be skipped if the system is run from SDRAM. A
22660 - LPC17xx CAN: The name can_txready clashes with Nuttx CAN core
22666 - Open1788: Add missing MPU configuration option. From Gregory Nutt.
22670 - LC823450-XGEVK: Remove -nostdinc to avoid build error From
22675 - STM32: Don't try including stm32_gpio.h from within chip/*.h
22681 - STM32 PWM: Fix polarity and IDLE state configuration From Mateusz
22683 - STM32 ADC, PWM and TIM: (1) missing T1TRGO2 for JEXTSEL, (2) fix
22687 - STM32 Heap: Change 'if CONFIG_STM32_HAVE_CCM' to 'ifdef
22688 CONFIG_STM32_HAVE_CCM' to avoid a warning when
22690 - STM32 Oneshot Timer: Fix an error introduced be a previous timer
22692 - STM32 Tickless Mode and Free-Running Timer: Apply Max's
22693 stm32_oneshot.c fix to the tickless implementation and to the
22695 - STM32 PWM: Set CCPxP and CCPxNP bits if polarity is negative.
22698 - STM32F7 Interrupts: Add the missing macro STM32_IRQ_NIRQS used by
22700 - STM32H7 DMA: Fix AHB1 base adresses memory map. From Mateusz
22702 - STM32H7 SysTick: H7 appears to ignore the SysTick CLKSOURCE bit
22707 - B-L072Z-LRWAN1: Fix typo in SPI1 pin definitions. From Mateusz
22709 - STM32F429I-DISCO: Handle multiple calls to the LCD
22711 - STM32F769I-DISCO: Florian R. H�lzlwimmer reports that
22715 - STM32F769I-DISCO: Remove CONFIG_STM32F7_QUADSPI=y from the
22723 - AM335x Serial: Eliminate an error 'TIOCSBRK undeclared. From
22728 - strto*: In alll strto* function family, did't consume single '-'
22730 - getopt(): Add logic to reinitialize the stale context for the
22736 force the state of getopt() to be re-initialized so that it can be
22738 if you tried to parse the same command line twice) but should catch
22740 - sscanf(): Initialized the lastc pointer to avoid the checks for
22743 - lib_vsprintf() (Legacy): No precision specifier resulted in
22745 - lib_vsprintf() (Legacy): Correct justification for alternate forms
22747 - lib_vsprintf() (Nano): Add long long support.
22751 - lib_vsprintf() (Nano): Remove CONFIG_LIBC_PRINT_MINIMAL. The
22756 - libs/libc/symtab: Remove unused symtab_findorderedbyvalue(). From
22758 - libs/libc/machine/arm: Fix the minor issue in libc arm machine
22761 - libs/libc/libc.csv: Should be locale.h not local.h. From Joao
22763 - libs/libc/libc.csv: Needed logic for correct compilation if not
22765 - libxx: Always include libxx_cxa_guard.cxx in the build for for
22768 - include/stdbool.h: Define bool only when __cplusplus isn't
22770 - include/nuttx/list.h: Added a Linux-compatible list
22772 - include/nuttx/irq.h: Fix enter_critical_section/spin_lock_irqsave
22775 - include/dlfcn.h: Correct naming of standard header file. Should
22777 - include/nuttx/nx/nxmu.h: This header file could be lethal; it
22779 - include/nuttx/compiler.h: Important fix for C++ users.
22780 compiler.h was using the value of __STDC_VERSION__ to determine if
22786 This fix is to ignore the (undefined) __STDC_VERSION__ if
22788 - include/nuttx/elf.h: Adds missing extern "C" __cplusplus guard.
22790 - include/poll.h: Remove un-named union from 'struct pollfd'. It
22793 - libs/libc/Makefile, libs/libnx/Makefile, and mm/Makefile: Remove
22794 obj-path MKDEPS option since make dependency target (MT) is not
22796 - include/nuttx/compiler.h: Assume inline support if
22801 - tools/convert-comments.c: Fix an error in handling of a blank C++
22803 - tools/lowhex.c: Fix an initialization problem that was causing
22805 - tools/nxstyle.c: Fix logic that detects if an operator is
22807 sched/ C files were used as Guinea Pigs to test nstyle.c. From
22809 - tools/nxstyle.c: Was confusing hex constants with strings staring
22810 with 'x'. Added logic to complain about hex constants containing
22812 - tools/nxstyle.c: Fix logic error that prevent detecion of '/' and
22818 - NSH Console: Fix copy paste errors. Some Kconfig configuration
22820 - nshlib/nsh_timcmds.c: Uninitialized struct tm caused 'date -s' to
22825 - apps/examples/nxterm: Replace direct calls to nxtk_register()
22827 Replace calls to (deleted) nxterm_unregister(). The correct way
22828 to delete a driver is by unlink'ing it. From Gregory Nutt.
22829 - apps/examples/nxterm: Most configuration options were not
22831 - apps/examples/nxterm: Replace illegal direct calls to
22834 - apps/examples/nxterm: NxWM passed the size of the NxTK sub-window
22840 - apps/graphics/NxWidgets/nxwm: Correct an error in the type of the
22842 - apps/graphics/NxWidgets/nxwm: Replace direct calls to
22844 boardctrl(BOARDIOC_NXTERM). Replace calls to (deleted)
22845 nxterm_unregister(). The correct way to delete a driver is by
22847 - apps/graphics/NxWidgets: Replace illegal direct calls to
22853 - apps/modbus/Kconfig: Fix modbus master Kconfig. Modbus Master
22858 - apps/netutils/dhcpc/dhcpc.c: Fix an error for DHCP REQUEST
22859 receiving a NAK.In DHCP Request operation, no need to update
22860 ciaddr to the client address and keep it as 0. From Kevin Liu.
22864 - apps/system/vi/vi.c: Fix an infinite loop bug that can show up in
22866 - apps/system/vi: Condition KEY_CMDMODE_REPEAT with
22867 CONFIG_SYSTEM_VI_INCLUDE_COMMAND_REPEAT to avoid build error when
22869 - apps/system/nxplayer/nxplayer.c: Fix build error when only enable
22871 - apps/system/system/system.c: Correct a path name. From anchao.
22872 - apps/system/taskset: Fix command arguments are not passed. From
22877 - apps/testing/ostest/timedmutex.c: pthread_mutex_timedlock()
22882 - apps/tools/mksymtab.sh: 'export LC_ALL=C' to get the traditional
22885 NuttX-7.30 Release Notes
22886 ------------------------
22890 that release consists of two tarballs: nuttx-7.30.tar.gz and
22891 apps-7.30.tar.gz. These are available from:
22896 Both may be needed (see the top-level nuttx/README.txt file for build
22903 - pthreads: Added non-standard pthread_get_stackaddr_np() and
22905 - boardctl(): Add a command to start the VNC server. From Gregory
22907 - Signals: Remove references to CONFIG_DISABLE_SIGNALS in many
22912 - NRF24L01: Add support for "multicast" TX mode - no waiting for ACK
22913 (needs to be enabled with fcntl SETTXPAYLOADNOACK) From Leif Jakob.
22917 - NX Graphics: Add new server->client callback to notify the window
22920 - NX Graphics: Implement new interfaces nx_synch() and nxtk_synch().
22921 This are used to synchronize the NX server with the window client.
22922 Currently most of the logic is equivalent to nx_block() and
22924 separate now because they are likely to diverge in the future.
22926 - NX Graphics: Add support for modal windows. From Gregory Nutt.
22927 - NX Graphics: Implement a software cursor. The cursor behaves
22929 transparent background. Includes new NX interfaces to show/hide
22930 the cursor, set the cursor image, and to move the cursor position.
22932 - NX Graphics: Added support for hiding windows. This features is
22935 hidden). The windows needs to remain healthy and to be updated in
22937 when the icon is clicked, the icon needs to be hidden on the
22938 background and the window needs to be restored in its current
22941 - NX Graphics: Windows can now be created in the hidden state.
22942 This can be used to clean up initial window presentation which may
22944 nx[tk]_setvisibility() is called to make the windows visible.
22946 - NX Graphics: Add new NX interfaces to query if a window is hidden
22948 - NxTerm IOCTLs: Replace specific interfaces between boardctl and
22950 - NxTerm: Add a new IOCTL that can be used to inform NxTerm that
22955 - CAN Upper Half: Support multiple readers of the same port From
22957 - MAX7456: Adds a read-only (for now) /dev/osd0/CM interface for
22959 to position the cursor over a desired subset of bytes, or request
22960 a large read to obtain the entire EEPROM memory contents. Values
22961 are returned in binary form. Use hexdump, etc. to format them for
22963 - Serial Upper Half: The upper half serial driver configuration
22964 CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams.
22968 - FUSB303: Add FUSB303 driver From Juha Niskanen.
22972 - PIC32MZ GPIO: Adds support for edge detect mode. Slew Rate was
22977 - SAME70-xplained: Add a configuration for test Twm4Nx using VNC.
22982 - LPC17xx Ethernet: Added support for KSZ8081RNA PHY to LPC17xx
22984 - LPC17xx Ethernet: Added support for Ethernet PHY ioctl() on
22989 - .i.MXRT1020: Gets imx1020 family support started. It is pretty
22990 similar, but subtly different, to 1050/60 (less PLLs, less GPIO
22993 Moved each of the imxrt family-specific files into its own
22994 subdirectory to tidy things up a bit, and remove the vast majority
23001 - LPC54xx USB FS Host: Bring in the USB FS OHCI driver from LPC17.
23009 - LPCXpresso-LPC54628: Add a Twm4Nx configuration. From Gregory Nutt.
23013 - CXD56xx: Add initial CXD56xx chip driver sources. From Nobuto
23018 - Spresense: Add Spresense board support. This is not the full
23019 Spresense BSP from Sony, only the barebones logic to present an
23024 - STM32F7 Clocking: Add support for using the HSE in bypass mode,
23026 - STM32F7 Clocking: Added support for TICKLESS mode. From Valmantas
23028 - STM32H7 Backup Domain: Add backup domain control registers. From
23030 - STM32H7 Clocking: Set the STM32H7 default HSI pre-divider to 4.
23031 The I2C driver currently assumes HSI clock to be 16MHz. From Jukka
23033 - STM32H7 Memorymap.: Add the STM32H7 SYSTEM_UID and DEBUGMCU_BASE
23035 - STM32L071x: Add support for STM32L071x. From Mateusz Szafoni.
23039 - STM32 OTGHS Host: Allow VBUS monitoring for the OTG_HS host
23041 - STM32F0/L0 ADC: Initial ADC support for the STM32 M0 From Mateusz
23043 - STM32F0/LO I2C: Port STM32F7 I2C to STM32F0/L0, From Mateusz Szafoni.
23044 - STM32F1 FLASH: As noted by Matias N, the FLASH base address used
23047 - STM32F3 I2C: Port STM32F7 I2C to STM32F3. From Mateusz Szafoni.
23048 - STM32F7 Ethernet.c: Auto-generate Ethernet MAC address from
23050 - STM32F7 FLASH: Add flash block mapping support for progmem. From
23052 - STM32F7 FMC: Updated stm32_fmc.h with more FMC definitions. From
23054 - STM32F7 GPIO: Adds additional pin alternate function for SPI2.
23056 - STM32F7 PWM: Ported the PWM from F4 to F7. From Eduard Niesner.
23057 - STM32F7 SDMMC: Support bypassing the input clock divider on the
23059 to the SDMMC interface with no dividing. From Anthony Merlino.
23060 - STM32F7 SPI: Add SPI DMA threshold configuration. From Valmantas
23062 - STM32F7 UID: Add UID access. From Valmantas Paliksa.
23063 - STM32F7 USB: USB High speed for STM32F7 series From Ramtin Amin.
23064 - STM32H7 Ethernet: Add stm32h7 Ethernet driver. This is the
23066 to be working on a nucleo board. This is still WIP, it doesn't
23069 - STM32H7 GPIO: Add the GPIO_ETH_RMII_RXD1 pinmap definition for
23071 - STM32H7 SDMMC: Add STM32H7 SDMMC driver. It is mostly copied
23075 - STM32H7 Timers: Add timer devices driver for STM32H7. This i
23078 - STM32L0 AES: Add support for AES for L0. From Mateusz Szafoni.
23079 - STM32L0 RND: Add support for RND. From Mateusz Szafoni.
23080 - STM32L0 HSI48: Add support for HS148 for L0. Move HSI48 enable
23081 from stm32_usbdev.c to stm32xx_rcc.c From Mateusz Szafoni.
23082 - STM32L4 USB FS Device: Add USB FS device support. From Juha
23084 - STM32L4 HSI48: Port HSI48 from STM32F0/L0 From Juha Niskanen.
23085 - STM32L4 CRS: Port CRS from STM32F0/L0 From Juha Niskanen.
23089 - B-L072Z-LRWAN1: Add ADC example. From Mateusz Szafoni.
23090 - B-L072Z-LRWAN1: Add nxlines_oled example (ssd1306). Add support
23092 - Nucleo-144: Added STM32_RCC_DCKCFGR2_DSISRC definition to board.h.
23094 - Nucleo-144: Mount sysfs for ifconfig for f767-netnsh/defconfig.
23095 Even if ifconfig is working to set IP, it will not work to display
23097 - Nucleo-144: Add basic PWM support to nucleo-144 board. More PWMs
23099 Tested on Nucleo-F767ZI. From Phil Coval.
23100 - Nucleo-F303ZE: Add nxlines_oled example (ssd1306) From Mateusz
23102 - Nucleo-H743ZI: Enable the FPU. From Jason Harris.
23103 - Nucleo-H743ZI: Add support for I2C devices: ssd1306, pca9635,
23105 - Nucleo-H743ZI: Add default clock configuration for SDMMC for
23106 Nucleo-H743ZI's board.h. From Jukka Laitinen.
23107 - Nucleo-H743ZI: Add the input clock frequency definitions in
23110 - STM32F4 Discovery: Keep c++ global constructor symbols From
23112 - Nucleo-L073RZ: Add MFRC522 support From Mateusz Szafoni.
23113 - OmnibusF4: Add boardctl() reset logic. From Bill Gatliff.
23114 - OmnibusF4: Add board_ioctl() which is needed only if
23116 to enable board IOCTLs and DFU mode reset. From Bill Gatliff.
23117 - STM32L Discovery: Add support for board_late_initialize(), Move
23120 - STM32F103-Minimum: Add PROCFS automount support From Alan
23125 - include/alloca.h: Add alloca.h. Included limited implementation
23128 - include/cxx/cstdlib: Add std::random() From Gregory Nutt.
23132 - Many locations: Remove references to CONFIG_DISABLE_SIGNALS.
23137 - apps/examples/fb: Add some awareness of overlays to
23139 - apps/examples/lvgldemo. Update to Littlevgl 5.3. From Matthew
23141 - apps/examples/pwfb: Extend example to verify software cursors.
23143 - apps/examples/pwfb: Add options to reduce the number of windows.
23144 This is helpful during debug to reduce the complexity. From
23149 - apps/netutils/cjson: Support for the current version of cJSON.
23151 - apps/netutils/libcurl4nx: This is an initial commit libcurl4nx.
23152 It is not complete yet, but I still wish to commit the unfinished
23153 bits to describe the roadmap, and because it is already usable. It
23156 - apps/netutils/netinit. This commit removes the private network
23160 - apps/netutils/netlib: Add a more flexible version of
23167 - apps/system/spi: I needed a small test tool for spi in the style of
23173 - apps/graphics/twm4nx. This release introduces Twm4Nx. Twm4Nx is a
23175 1.0.10 to NuttX NX windows server. No, a port is not the right
23176 word. It is are-design of TWM from the inside out to work with the
23178 legacy. But Twm4Nx is more a homage to TWM than a port of TWM.
23182 icon management, user-defined macro functions, click-to-type and
23183 pointer-driven keyboard focus, graphic contexts, and user-specified
23189 conversion to C++).
23196 apps/graphics/twm4mx/README.txt. To summarize: The port is fully
23198 missing critical feature is built-in touchscreen calibration.
23200 - apps/graphics/littlevgl. Update to Littlevgl 5.3. From Matthew
23202 - apps/graphics/nxglyphs: Put all NxWidgets and NxWM glyphs into a
23206 - apps/graphics/nxglyphs: Add some new cursor bitmap images. From
23208 - apps/graphics/nxglyphs: Add mkcursor.c. Will auto-generate
23210 - apps/graphics/nxglyphs: Add 16x16 cursor images. 30x30 are kind
23212 - apps/graphics/nxglyphs: Add a new resize cursor image. From
23214 - apps/graphics/nxwm: Separate NxWidgets and NxWM into separate
23217 - apps/graphics/nxwm: Move the NxWM unit test main() to apps/nxwm.
23220 - apps/graphics/nxwidgets: Update NX window clients so that they
23223 - apps/graphics/nxwidgets: Add a synchronize method to every window.
23225 to synchronize with the NX server. From Gregory Nutt.
23226 - apps/graphics/nxwidgets: Add support for modal windows. From
23228 - apps/graphics/nxwidgets: Add cursor control methods to the
23230 - apps/graphics/nxwidgets: Add a method to CButtonArray that will
23231 allow us to dynamically resize the array (at the cost of losing all
23233 - apps/graphics/nxwidgets: Fix a possible deadlock condition when
23235 re-requesting geometry data if we don't already have it. From
23237 - apps/graphics/nxwidgets: Add handshake to
23238 CWidgetControl::getWindowHandle() to avoid returning a NULL
23240 - apps/graphics/nxwidgets: CNxTkWindow, CNxWindow, CNxServer: Add
23241 support to create RAM backed windows. From Gregory Nutt.
23242 - apps/graphics/nxwidgets: Add methods to all windows to query if a
23251 - Clock Initialization: A recent change broke Tickless mode for all
23252 architectures. The original change was intended to handle the
23254 side effect is that this changed to order of initialization of
23258 - pthread Stack Attribute: Fixed pthread_attr_get/setstacksize
23259 param type to size_t. From Joao Matos.
23260 - Signals: The abnormal termination signal handler was just calling
23261 exit() conditionally when, for example, Ctrl-C is sent to a task.
23264 logic must wait for cancelation to be re-enabled; If cancellation
23265 is deferred then the abnormal termination logic may have to wait
23266 for the victim task to enter or exit a cancellation point. From
23268 - Syscall: Added support for munmap() syscall. From Joao Matos.
23269 - Syscall: Fix a warning due to inconsistencies in return type in
23271 - Syscall: Correct an error syscall.csv. Error occurred when
23277 - fs/littlefs/lfs.c: Fix lfs_format bug. In superblock disk root-
23282 - getsockname(): Fix addrlen check in socket debug features.
23284 intention was to dereference the pointer and to check the length.
23286 with CONFIG_DEBUG_FEATURES and with -Werror flag set. From Jukka
23288 - Network Locking: net_lock() and net_restorelock() now return a
23291 -ECANCELED. That cancellation indication needs to ripple all the
23292 way back to the highest levels where the cancellation can be acted
23296 - PHY Notification Driver: Change sprintf to strncpy in phy_notify.
23299 - 6LoWPAN HC06: Correct an endian-ness problem in HC06 decompression.
23304 - NRF24L01: Don't block in read if file descriptor is O_NONBLOCK.
23309 - NX Graphics: Fix an error in coordinate system usage. Expected
23311 rectangle in window-relative coordinate frame. From Gregory Nutt.
23312 - NX Graphics: Fix an oversight in the implementation of per-window
23314 for all cases ... EXCEPT ONE: When the window is resized to a
23317 - NxTK: Fix an error in handling mouse events for framed windows.
23319 The is only for NX windows, but the outside-the-side positions were
23321 - NxTK: Refuse to open a toolbar of height zero or less. From
23323 - Nxglib: Correct bogus logic in nxgl_interesting(). From Gregory
23325 - VNC Server: Fix an error in color conversion. From Gregory Nutt.
23329 - APDS9960: Initial state of allocated structure was not being set.
23331 - MFRC522: In mfrc522_read uid.sak must be different from 0x04 not
23333 interface to read MIFARE Ultralight data From Mateusz Szafoni.
23334 - Power: Fix build for battery gauge From Tom Kopriva.
23335 - Syslog: In syslog buffered mode, avoid IOB alloc lock-up with
23337 logic to use 'iob_tryalloc' instead of blocking 'iob_alloc' to
23340 incoming TCP transfer uses free IOB buffers and processing
23341 threads try to use syslog which then block at iob_alloc. From
23343 - USB CDC/ACM Device: This fixes a problem where the host sent a
23346 messages to the child interfaces when a message was not
23349 "standard" message but if it is also directed to the device.
23350 Otherwise, the handling is delegated to the children of the
23352 - USB HID: The usbhid_descriptor_s struct defined in hid.h included
23353 some optional fields that should not be hard-defined as part of
23357 with an optional descriptor so it is safe to remove. From Matias N.
23358 - USB MSC Device: Correct typo "const const" to "const".
23362 - Zerocross Driver: Fix some errors when debug assertions are
23364 - User Leds: Fix ledset validity check in ULEDIOC_SETALL ioctl.
23369 - All board interfaces (those starting with board_) must be defined
23370 in board-specific logic. Otherwise, they cannot be customized for
23372 interface was defined in architecture-specific logic that only
23374 the board_reset() implementation from the architecture-specific
23375 code and re-implements it in the src/ directory of each board that
23378 - Start-up: Remove dependency on CONFIG_ARCH_FPU for inclusion of
23380 - Architecture initialization: up_initialize() needs to know about
23385 - PIC32MZ GPIO: Corrects the gpioirq when mismatch mode is
23388 * ARMv7-A:
23390 - ARMv7-A Build: Fix 'cc1: warning: switch -mcpu=cortex-a7 conflicts
23391 with -march=armv7-a switch' From Xiang Xiao.
23395 - NRF52: Fix compiler error in nrf52832_errdata.c when following
23400 - STM32 Configuration: It seems one option in the timer configuration
23402 - STM32 start-up: Inclusion of nvic.h should not be conditioned on
23404 - STM32H7 Clocking: Fixes for STM32H7 RCC definitions. From Jukka
23409 - STM32F0/L USART: A few fixes for USART. From Mateusz Szafoni.
23410 - STM32F1/F30 FLASH: RCC register access should not be offset by
23412 - STM32F7 CAN: CAN fixes. From Valmantas Paliksa.
23413 - STM32F7 I2C: I2C Interrupt storm fix. I2C track bad state. Now
23416 - STM32F7 OTG: Fixes some macros related to OTGFS/OTGHS preventing
23418 - STM32F7 OTG Device: Correct hard-coded FIFO size that is wrong
23420 - STM32F7 QSPI: Fix QuadSPI interrupts. This commit essentially
23424 offsets From Pierre-Olivier Vauboin.
23425 - STM32H7 I2C: Fix I2C4 compilation for STM32H7. From Jukka
23427 - STM32H7 UART: Fix compilation for UART7, UART8 and I2C4s. From
23429 - STM32L4 USB Device: Add missing PWR USBV enable, correct two USB
23434 - STM32F103-Minimum: USB reset was not working appropriately since
23435 the pin connected to D+ was incorrectly defined and the pullup/down
23437 - Nucleo-l476RG: Fix some errors in GPIO logic when debug assertions
23439 - Nucleo-L476RG: Add missing files of BMP180 example for Nucleo-L476RG.
23441 - STM32F103-Minimum GPIO: Fix some errors when debug assertions are
23443 - STM32L4 PWM: Fix register addr, en_bit and resetbit for pwm timers.
23445 - STM32F746G-DISCO: I2C1 config on stm32f746g-disco. Typo in
23450 - include/limits.h: Remove the duplicate TMP_MAX definitions. The
23453 - include/sys/select.h: Fix compiler error when
23455 - include/signal.h: Add commented out definition of the si_addr
23457 - include/unistd.h: Fixed R_OK/X_OK definitions to match POSIX.
23460 - libs/libc/locale: Improved error handling in setlocale(). From Joao
23462 - libs/libc: Fixed return code in uname(). From Joao Matos.
23463 - libs/libc/stdio: Restore support for printing NULL string as
23471 - apps/examples/pca9635/pca9635_main.c: fix compilation error. From
23476 - Various graphics apps (and apps/examples): If CONFIG_VNCSERVER=y,
23480 - apps/graphics/nxwidgets: CWidgetControl::handleLeftClick now
23481 returns a value to indicate if the click was actually processed or
23484 - apps/graphics/nxwidgets/: NXWidgets::CNxWidgets: Fix some issues
23492 - apps/system/nxplayer: Fix some logical errors from recent commits.
23495 NuttX-7.31 Release Notes
23496 ------------------------
23500 that release consists of two tarballs: nuttx-7.31.tar.gz and
23501 apps-7.31.tar.gz. These are available from:
23506 Both may be needed (see the top-level nuttx/README.txt file for build
23513 - poll(): Removed all references to CONFIG_DISABLE_POLL. The
23515 - LWL console: Add support for OpenOCD 'Lightweight Link' protocol
23522 - Socket Options: Previous change removed some incorrect SO_LINGER
23525 version of SO_LINGER. It is based on new logic to drain the
23527 Supports notification when UDP or TCP write buffer becomes empty.
23529 - Telnet Driver: Handle ctrl events (SIGINT, SIGSTP). From
23531 - Telnet Driver: I/O thread now offloads reading from socket
23532 from client thread to the I/O thread. From Valmantas Palik�a.
23536 - GS2200M: Add support for Telit GS2200M Wi-Fi module From Masayuki
23538 - GS2200M: Introduce CONFIG_WL_GS2200M_SPI_FREQUENCY. Also, changed
23539 usleep(100) to up_udelay(100) to avoid invalid response. From
23541 - GS2200M: Add channel parameter for AP mode in gs2200m.c From
23546 - Video Streaming: Add basic Video Stream and Capture implementation
23548 - video/: Create video/ directory to hold non-driver video-related
23550 - EDID: Add some initial EDID logic ported from FreeBSD. From
23552 - EDID: Add logic to sort video modes by how close they are to the
23553 preferred mode. This is part of the logic to pick the best possible
23555 - EDID/Video Modes: Separate EDID and from videomode management.
23557 - EDID/Video Modes: Add debug functions to dump the EDID and
23559 - VESA GTF: Bring VESA Generalized Timing Formula (GTF) from FreeBSD.
23561 - Video Modes: At some additional lookups from FreeBSD. Not
23563 - tda19988: Now uses the new common videomode structure of
23566 - ILI9340: Add ILI9340 LCD Single Chip Driver. Required LCD driver
23570 - LPM013M091A: Add JDI LPM013M091A LCD Driver. From Alin Jerpelea.
23571 - ISX012: Add support for ISX012 Image sensor. From Alin Jerpelea.
23575 - SPI Interface: Added standard definitions for ADC SPI device ID.
23577 - AK09911/AK09912: Add Asahi AK09911/AK09912 compass sensor over I2C
23579 - AS726X: Add support for AS726X spectral sensor From Fabian Justi.
23580 - BMI160: Add driver support for the Bosch BMI160 Inertial Measurement
23583 - BMP280: Add Bosch BMP280 Barometic pressure sensor connected over
23585 - INA3221: Adds INA3221_I2C_ADDRx macro helpers. From Anthony
23587 - VL53L1x: Added support for VL53L1x TOF sensor. From Juan Flores.
23591 - PIC32MZ DMA: Add DMA support. From Abdelatif Guettouche.
23595 - i.MXRT EHCI: Add i.MXRT EHCI driver. From Dave Marples.
23596 - i.MXRT USDHC: Implements SDIO and Multi-card support for i.MXRT.
23598 - i.MXRT USDHC: Implements USDHC1 & 2 selection on the imxrt. If
23602 - i.MXRT Serial: Add TIOCSINVERT ioctls. From Beat K�ng.
23603 - i.MXRT Serial: Implemented RS485 RX/TX switching and RTS/CTS flow
23610 - Kinetis Serial: Add UART signal inversion support From Beat K�ng.
23614 - LPC11xx: Support for the LPCXpresso-LPC1115 and for the LPC1115
23615 architecture in general was removed after NuttX-7.30. The LPC11
23616 port was never really used (to my knowledge) and was no longer
23619 repository at any time if anyone is willing to provide support
23624 - PNEV5180B: Add support for NXP Semiconductors' PN5180 NFC Frontend
23628 - PNEV5180B: Add usbnsh configuration. This is basically the same as
23631 - PNEV5180B: Adds NSH configuration with UART0 and eth0 via CDC/ECM
23633 - PNEV5180B: Add new configuration includes a USB Composite Device
23637 - PNEV5180B ROMFS: Auto-mount baked-in ROMFS image. Includes support
23639 mounting it during board bring-up. From Michael Jung.
23640 - PNEV5180B PROTECTED: Add PROTECTED mode configuration with
23645 - LPC40xx: Add support for LPC40xx family chips. Renamed LPC17XX to
23654 - LPC4088-Devkit: Added board configuration for Embedded Artists
23656 - LPC4088-Quickstart: Added board configurations for Embedded Artists
23661 - LPCXpresso-LPC54628: Enable DATE command in twm4nx1 and twm4nx2
23666 - CXD56xx: Adds (1) the HW pin configuration, (2) GPIO support for
23671 - CXD56xx: Add Package Configuration. The CXD56xx can come in FCBGA
23672 185 pin or WLCSP 100 pin package. For each package we have to pick
23673 the right pin setup. The default configuration is set to FCBGA 185
23675 - CXD56xx: Add Power Management support From Alin Jerpelea.
23676 - CXD56xx: (1) Add syscontrol, (2) Add the function to change the
23682 - CXD56xx USB: Add basic support for USB connectivity. From Alin
23684 - CXD56xx SDHC: Add SDHCI driver for the CXD56xx. From Alin
23686 - CXD56xx SPI: Add SPI support. From Alin Jerpelea.
23687 - CXD56xx DMA: Add DMA support. From Alin Jerpelea.
23688 - CXD56xx RTC: Add RTC support. From Alin Jerpelea.
23689 - CXD56xx PWM: Add support for PWM. From Alin Jerpelea.
23690 - CXD56xx Power Management: Add Power Management PROCFS support. From
23692 - CXD56xx Timer: Add Timer driver. From Alin Jerpelea.
23693 - CXD56xx Watchdog Timer: Add watchdog timer support. From Alin
23695 - CXD56xx UID: Add support to be able to read the HW UID. From Alin
23697 - CXD56xx I2C: Add I2C support. From Alin Jerpelea.
23698 - CXD56xx I2C: Add I2C character driver support. For testing
23699 purposes, we use the CXD56_I2C_DRIVER to register the /dev/i2c[]
23701 Add SPI-based SP card support. From Alin Jerpelea.
23702 - CXD56xx SCU: Add Sensor Control Unit (SCU); Use DMAC for reading
23704 - CXD56xx ADC: Add ADC interface support. From Alin Jerpelea.
23705 - CXD56xx eMMC: Add eMMC support for CXD56xx chip From Alin Jerpelea.
23706 - CXD56xx Camera: Add driver for hardware image processor device to
23709 - CXD56xx CISIF: Add CISIF support to be able to use cameras. From
23711 - CXD56xx GNSS: Add GNSS device, add Geofence Support, add UART0
23717 - Default Configurations: (1) We are using the framework to
23724 - Default Configurations: Add support for RNDIS configuration. From
23726 - RTC: Enable RTC functionality on SPresence board From Alin
23728 - SPI FLASH: Enable SPI Flash arch/arm/src/cdx56xx: (1) Group all
23732 - Add SPI configuration for SPresence board. Enable PWM support on
23734 need to be enabled by the CONFIG_CXD56_PM_PROCFS option. Timers can
23737 - Add USERLED for SPresence board. From Alin Jerpelea.
23738 - Enable I2CDEV for SPresence board. Add useful diagnostic LEDs on
23740 - Add support for Tilt GS2200M Wi-Fi module. From Masayuki Ishikawa.
23741 - Remove SPI MMC/SD support and enable ADC support for SPresence
23743 - Enable BMI160_I2C sensor over I2C on SPresence board. From Alin
23745 - Add I2CTOOL support and extend GPIO for future use. Add delay
23746 support for CXD56xx chip. For development is useful to register
23749 - Add use o the CXD56_I2C_DRIVER to register the /dev/i2c character
23752 - Enable UID functionality. To enable the UID functionality for
23755 - Add USBDEV_SETNOTIFYSIG signal ID. Set signal ID for notify USB
23758 - Register the procfs in the NSH configuration. This is a
23761 SPI to keep all configurations in sync. From Alin Jerpelea.
23762 - Add support for MSC and USB Composite device. Adds usbmsc
23766 - LCD: Add support for LPM013M091A LCD, add support for ILI9340
23767 LCD, add a new configuration to support an LCD. From Alin
23769 - WiFi: Improve performance for webserver: (1) Enable SPI DMA for
23770 both TX and RX, (2) Increase SPI clock speed from 4MHz to 10MHz,
23771 (3) Increase buffer size for sendfile() from 512B to 1KBm abd (4)
23773 - MPY: Add MPY defconfig. From Alin Jerpelea.
23774 - Update defconfigs rndis and wifi: Enable RTC and webserver with
23777 - Build nuttx.spk images. Enable nuttx.spk binary image that can be
23779 - configs/SPresence: Add entry point for MPY. The entry point is
23782 - Enable internal flash storage for SPresence boards. The SmartFS
23784 - For compatibility with SDK we need to change the USER_ENTRYPOINT
23785 in all configurations to spresense_main(). From Alin Jerpelea.
23789 - STM32 Kconfig: Add MEDIUM_DENSITY selection. From Dave Marples.
23790 - STM32 Kconfig: Add the missing STM32 LCD Clock Source Selections.
23792 - STM32G0: Initial support for STM32G0 family. From Mateusz Szafoni.
23793 - STM32F0L0G0: Renamed directories STM32F0L0 to STM32F0L0G0 since
23794 they now also supports the STM32G0 thanks to Mateusz Szafoni's
23796 - STM32H7x3: Added ADC pins to pin map. From David Sidrane.
23800 - STM32 PWM: Add support for all PWM modes. Add an interface to
23802 corresponds to the timer channel and STM32_PWM_OUTx corresponds to
23803 the timer channel output. Add CHAN5 and CHAN6 to
23806 - STM32 FSM/FSCM: Split the STM32 FMC/FSMC functionality. Makes FMC
23811 - STM32F7 DTCM: Add procfs register From Daniel Agar.
23812 - STM32F7 GPIO: Add GPIO driver. Code is inspired from STM32F3-
23813 Discovery and Nucleo-L476RG platforms. Tested on Nucleo-F767ZI.
23815 - STM32F7 Serial: This adds the ability to invert and swap RX/TX on
23816 STM32F7 UARTs. I added the TIOCGINVERT as well to reserve the IOCTL
23819 - STM32L4 CRS: Make STM32L4 CRS synchronization source board
23821 - STM32L4 HSI48: Enable CRS_CR_CEN with CRS_CR_AUTOTRIMEN. From
23823 - STM32L4 I2C: Add support for 16 and 120 MHz timings. Board can use
23825 - STM32L4 PWR: Enable PWR peripheral for setting USV. From Jussi
23827 - STM32L4 RCC: Use Range 1 Boost mode if SYSCLK is higher than 80
23829 - STM32L4 Serial: Add TIOCSINVERT and TIOCSSWAP ioctls. From Beat
23831 - STM32H7 ADC: Added ADC Driver, ADC clocking. From David Sidrane.
23832 - STM32H7 Ethernet: Fix typo in define. From Pierre-Olivier Vauboin.
23833 - STM32H7 PWM: Port PWM from STM32 From Mateusz Szafoni.
23834 - STM32H7 QEncoder: Ported the QEncoder from F7 to H7. From Eduard
23836 - STM32H7 Serial: Add TIOCSINVERT and TIOCSSWAP ioctls. Ensure
23841 - Olimex-STM32-E407: Added BMP180 initialization and a configuration
23842 to test the BMP180. From Juan Flores.
23843 - Olimex-STM32-E407: Add DAC support, add IN219 support, add timer
23845 - Olimex-STM32-E407: Add support for MRF24J40 radio. From Gregory
23847 - Axoloti: Adds initial support for the Axoloti sound/music
23850 - Nucleo-G071RB: Initial support for nucleo-g071rb. From Mateusz
23852 - Nucleo-L432KC: Add new configuration settings for CRS
23853 synchronization to board.h. From Juha Niskanen.
23854 - Nucleo-L432KC: Add support for testing the ina219 current sensor.
23856 - Nucleo-L452RE: Add new configuration settings for CRS
23857 synchronization to board.h. From Juha Niskanen.
23858 - Nucleo-144: Add ROMFS support. Image was generated using genromfs
23859 tool. Tested on Nucleo-F767ZI. From Phil Coval.
23860 - Nucleo-144: Add reset feature. Code is derives from STM32F4-
23863 - Nucleo-L476RG: (1) Add I2C tool to board init, (2) Add support for
23865 - Nucleo-L496ZG: Add new configuration settings for CRS
23866 synchronization to board.h. From Juha Niskanen.
23867 - STM32L476VG-Disco: Add new configuration settings for CRS
23868 synchronization to board.h. From Juha Niskanen.
23869 - STM32L4R9AI-Disco: Add ksh config, some updates for I2C, SPI and
23871 - Nucleo-H743ZI: Add ADC support. From David Sidrane.
23872 - STM32F769I-Disco PWM: Enable PWM support for stm32f769i-disco
23874 - STM32L-Discovery: Add button support for stm32Ldiscovery. Add
23875 chronometer board config. From Alan Carvalho de Assis.
23879 - AM335x Clock Module: Add clock module registers definition. Switch
23880 to DMTIMER1 for systick. From Petro Karashchenko.
23884 - AM335x CAN, LCD: Add register description files for DCAN and LCD.
23886 - AM355x I2C: Add register description files for I2C (plus various
23887 improvements to the WDOG register definitions) From Petro Karashchenko.
23888 - AM355x MCSPI: Add register description files for MCSPI. From Petro
23890 - AM355x LCDC: This change brings in an initial LCD driver into the
23892 - AM335x Framebuffers: Add logic to map the framebuffer to a non-cached,
23893 non-buffered memory region. From Gregory Nutt.
23894 - AM335x LCDC: Add logic to get/set the module reference clock. From
23899 - Beaglebone-Black LCD: Add a configuration for bringing up the LCDC
23901 - Beaglebone-Black LCD: Framework (only) for TDA19988 and LCD support
23908 - z16f ZNeo: Add support for the latest 5.2.1 version of the ZDS-II
23913 - Integrate support for the newest eZ80 ZDSII 5.3.0 toolchain. From
23918 - eZ80 RTC: Integrate and verify the RTC driver From Gregory Nutt.
23919 - eZ80 RTC: Add an RTC lower half driver. From Gregory Nutt.
23923 - MakerLisp: Add initial support for the MakerLisp eZ80 board. Ref:
23925 - MakerLisp: Add hooks needed by SPI driver. Move SPI MMC/SD chip
23926 selected configuration from ez80_lowinit.c to here as is done in
23929 - MakerLisp: Add Smart Flash Programmer project. From Gregory Nutt.
23930 - MakerLisp: Enable Procfs, RTC, SPI-based SD support, task name, NSH
23932 - MakerLisp: Use .ztgt files from MakerLisp SDK. From Gregory Nutt.
23933 - MakerLisp: Add a tiny FLASH-resident loader that will load and
23936 - MakerLisp: Bring in a new configuration to support execution
23938 - MakerLisp: Add an sdboot configuration that will load .hex files
23940 - MakerLisp: Add a linker script to support copying the NuttX image
23942 - MakerLisp: The VGA display controller and keyboard controller come
23944 newlines expance to carriage-return, newline. This change turns that
23949 - include/cxx/cstddef: Add C11++ std::nullptr_t From junmin-kim.
23950 - libc netdb: Implemented the netdb functions getnameinfo(),
23955 - Applied a style sheet to static HTML files. Put the TOC of each
23956 document to the side, where it made sense (in some documents the
23959 so I had to accommodate for this. I also didn't go into collapsing,
23961 - Coding Standard: Add a brief section summarizing the major
23963 stop-gap measure in lieu of having a real C++ coding standard. From
23965 - Coding Standard: Update requirements for indenting C pre-processor
23967 - Coding Standard: Small change discouraging the practice of
23970 - COPYING. Tools in the tools/ directory are not intended for binary
23971 redistribution and may not all conform to BSD licensing. From
23976 - tools/ocdconsole.py: OCD TCL interface changed after version 0.10
23977 of OpenOCD. This change allows the script to work with both the
23979 - tools/nxstyle.c: Tool depends on the file under test containing
23982 - tools/nxstyle.c: Bandaid-up logic that detects left brackets on the
23985 - tools/nxstyle.c: No warning for declarations that begin in column 1
23989 - tools/: Add spk binary format. The .spk binary format is used on
23990 SPresence and other boards based on the CXD56 arch. To enable this
23991 binary format set in your config CONFIG_CXD56_BINARY=y. From Alin
23993 - tools/: Add flash_writer for CXD56 boards. This flash writter is
23995 'tools/flash_writer.py -s -c /dev/ttyUSB0 -d -b 115200 -n nuttx.spk'.
24000 - Removed all references to CONFIG_DISABLE_POLL. The standard POSIX
24005 - apps/examples/abntcodi: Adds test/demo program for ABNT CODI
24007 - apps/examples/webserver: Update to compile with
24011 - apps/examples/chrono: Add chronometer apps example. From Alan
24016 - apps/netutils/webserver: Add mp3 mime type to httpd.c. From
24018 - apps/netutils/webserver: Add directory listing to httpd. From
24020 - apps/netutils/webserver: Add web server info based on uname().
24025 - apps/wireless/gs2200m: Add usrsock daemon for Tilt GS2200M Wi-Fi
24027 - apps/wireless/gs2200m: Add channel parameter for AP mode. From
24032 - apps/graphics/nxglyphs: Add more modern looking button images for
24034 - apps/graphics/slcd: Adds a CSLcd class that will generate graphic
24036 - apps/graphics/twm4nx: This change adds a calibration screen to
24037 Twm4Nx. In addition to the Calibration screen port from NxWM, this
24038 required extensions to the event handling logic to support (1)
24041 - apps/graphics/twm4nx: Move application-related files into different
24042 directories to separate them from the core Twm4Nx files. From
24044 - apps/graphics/twm4ndx: Compile out cursor support if we are using a
24046 - apps/graphics/twm4nx: Add an alternative COMPONTEMPORARY theme.
24048 - apps/graphics/twm4nx: Use custom CWidgetStyle to force Icon
24049 background to match selected desktop background. From Gregory Nutt.
24050 - apps/graphics/twm4nx: Add some definitions to support Themes.
24052 - apps/graphics/twm4nx: Add a configuration option to control the
24057 - apps/graphics/tmw4nx: Add a CClock class that implements the
24060 - apps/graphics/twm4nx/README.txt: Add an overview of how to create
24065 - apps/industry/abnt_codi: Adds support for ABNT CODI library. This
24075 - Semaphores: Fix a bad assertion in priority inheritance logic.
24079 closer to what the comments say. From Gregory Nutt.
24080 - Memory Manager: Fix error that occurs when CONFIG_CPP_HAVE_VARARGS
24081 is not defined. In that case, the arguments to the debug macro will
24084 - System Calls: Adapt the conditional compile logic on when to
24085 include the vfork() syscall proxy and stub to the logic used for
24087 - System Calls: Fixed SYS_mount syscall define when CONFIG_FS_READABLE
24089 - waitpid(): In waitpid, remember to grab the exited child ptr. After
24091 to use group_exitchild to get the pointer of recent exited child.
24096 - MMC/SD: Fixes bug where thread gets deadlocked due to recursive call
24098 MMCSD, if we are being told there is a card, but we fail to
24099 initialize it, we should not re-register for an insertion event as
24100 this will immediately cause us to call in again. Instead, we should
24101 register for a removal event and wait for the card to be removed and
24102 re-inserted. From Anthony Merlino.
24106 - UsrSock: Fix debug logs and remove DEBUGASSERT from
24109 mode, the first request to accepted sockets will be recv() or other
24112 - ICMPV6 Autoconfig: Use ntohs() to convert IPv6 address from
24113 network to host order int network debug output. From Bernd Walter.
24114 - TCP Buffering: Fix TCP buffer send deadlock in iob_copyin() when
24117 - TCP Close: Fix TCP active close in inet_close.c. In previous
24122 server use-cases, SO_LINGER is not usually set and even in these
24127 - UDP: Fix C89 compatibility problem. Empty initializers are not
24129 - Telnet: Fix a C89 non-compliance that was breaking the eZ80 build.
24134 - NRF24L01: Fix NRF24L01_NCMDS in ioctl.h. The last one in
24136 - NRF24L01: Fix PIPENO/PKTLEN bitmask in RX FIFO header. In RX FIFO
24137 header, the first byte should use 5 lsb to store PKTLEN and 3 msb
24138 to store PIPENO. However, FIFO_PIPENO_SHIFT was set to 4 which
24139 causes the lsb of pipe number to interfere with the received packet
24145 - Raising Windows: Fix a critical list handling bug in the graphics
24146 system. When a lower-level window was raised while a model window
24151 - Serial: Limit the number of times that the poll semaphore is
24153 - USB Host: Remove duplicate const in USB Host files. From Adam
24155 - USB Host Composite: Class-specific descriptors were not available
24158 This change will copy any class-specific interface descriptors for
24159 use in downstream class drivers. The loop was aborting due to
24160 finding two interface descriptors back-to-back. From Adam Porter.
24161 - USB Host Composite: The cfgdesc pointer was initialized after the
24164 overwriting memory belonging to the first copied interface
24166 - USB MSC: Fix usbmsc_exportluns declaration. Fixes the following
24167 error "...undefined reference to `usbmsc_exportluns'". From Alin
24172 - Rename all arch/<family>/src/<chip>/chip directories to
24183 - Default Configurations: Update configurations for changes to
24189 - Default Configurations: Change CONFIG_NSH_MACADDR to
24191 - Default Configurations: Fix mac address settings for RNDIS.
24194 conforms to this change. From Masayuki Ishikawa.
24195 - Default Configurations: Kconfig files should not select
24198 than to produce an erroneous configuration. From Gregory Nutt.
24199 - Linker Scripts: Make sure sections are aligned to 32-bits in all LD
24201 SAMD21 by Bernd Walter, but should be applicable to all other LD
24203 - Linker Scripts: Add . = ALIGN(4); before every .data section,
24206 every .init_section. Convert TABs to spaces in all ld linker
24207 scripts. This just makes things easier to modify with scripts
24209 - configs/Board.mk: Cannot call $(AR) directly. That works only with
24210 GCC. It must, instead use the ARCHIVE command from Config.mk as do
24215 - Fix a copy-paste error. On vfork, the GP register was being set to
24218 - An older commit used CP0 register definitions that were not defined
24221 outside that toolchain. Fix: Add definitions to NuttX cp0.h header
24226 - PIC32MZ GPIO: Use LAT instead of PORT when writing. From Ouss4.
24230 - SAMD2/L2: Correct TC register bit field definitions used with
24235 - LPC17xx PROTECTED: On the LPC1769 there are two 16 KiB AHB SRAM
24236 blocks, which are mapped back to back at physical address 0x2007C000
24239 to a heap. In the protected build mode, when the memory protection
24250 have no hardware to confirm. From Michael Jung.
24254 - LPCXpresso-LPC54628: Modify the TWM configurations to properly
24257 Otherwise, it is not possible to use multiple NxTerms with each the
24258 keyboard input going to a different NxTerm window. From Gregory
24263 - i.MXRT Serial: Fix serial TIOCSINVERT From David Sidrane.
24264 - i.MXRT USDHC: USDHC Stopgap Fix for build breakage From David
24266 - i.MXRT USDHC: Fix compiler error for CONFIG_IMXRT_USDHC1 &&
24271 - LC823450-XGEVK: Remove CPU assignment for LPWORK. This change will
24272 reduce audio under-run when running dvfs auto mode. From Masayuki
24277 - EFM32 USB Host: Apply Adam Porter's STM32 fix to EFM32 which has
24282 - STM32F1 Pinmap: Fix names for complementary PWM outputs From
24284 - STM32L4: If SRAM3 is used as heap, do not power it off in stop 2
24289 - STM32 ADC: Fix a compilation error when verbose analog debugging is
24292 - STM32 PWM: Fix pulse count for the number of counts greater than 128.
24294 - STM32 USB OTG FS/HS Host: In stm32_ctrlout() in the HS and FS host
24296 and buflen to the stm32_ctrl_senddata() function. With this change,
24297 I am able to send MBIM control messages to my USB modem, and read the
24299 - STM32L4 USB: Fix USB device PMA accesses. USB PMA accesses are
24300 done as 16-bit words on STM32L4 instead of 32-bit words on STM32L1.
24302 - STM32L4 OTG FS/HS: Fix constant using in comparison to determine
24304 - STM32F7 OTG FS/HS: Fix constant using in comparison to determine
24306 - STM32H7 PWM: Fix pulse count for the number of counts greater than 128.
24308 - STM32H7 Serial: Fix error when SINGLEWIRE or
24310 - STM32H7 SPI: Correct a typo in condition compilation. From
24312 - STM32H7 Timer: Fixed compile errors with TIM13, TIM14, TIM7. From
24314 - STM32H7 USB OTG FS/HS: Fix constant using in comparison to determine
24316 - STM32G0 Serial: Fix STM32G0 error when SINGLEWIRE or SERIALBRK_BSDCOMPAT
24321 - Nucleo-L432KC: Shorten some long lines, fix i2c pinout. From
24323 - STM32L476VG-Disco: Fix an error in defconfig files because a line
24326 - STM32L4R9AI-Disco: Fix an error in defconfig files because a line
24329 - OmnibusF4: Correct naming of a configuration variable for ROMFS.
24331 - Olimex-STM32-E407: Change initialization to match the way it is
24333 - Olimex-STM32-E407 SPI: Add SPI initialization logic. From Juan
24335 - STM32F4-Discovery ROMFS: Missing colon in declaration of local
24337 - STM32F4-Discovery ROMFS: Correct naming of a configuration variable
24339 - STM32F4-Discovery Build: Fix .ARM.exidx section overlap Source:
24340 …https://stackoverflow.com/questions/30778614/arm-none-eabi-ld-section-arm-exidx-overlaps-section-d…
24342 - STM32F4-Discovery PROTECTED: Fix a problem with undefined symbol
24344 into recursive archive group between --start-group and --end-group.
24347 - Nucleo-H743ZI SPI: Correct typos in function naming. From Jonathan
24352 - AM335x SYSCLK: Add a function to return a frequency of the system
24354 - AM355x CM: Fix a typo in a macro name. From Gregory Nutt.
24355 - AM355x LCD: Fix a few typos. Add things needed by the LCDC driver.
24360 - Tiva Ethernet: Add a workaround for tiva with qemu. With qemu,
24362 correctly. This change is a workaround to avoid this issue. From
24367 - TM4C1294-Launchpad: Fix syntax error in oocd.sh script. From
24372 - z80: up_addregion() must be prototyped in nuttx/mm/mm.h, not
24373 up_internal.h. Various name changes to better conform to the coding
24379 - z80sim: Remove unused function up_earlyserialinit() from serial
24384 - z16f ZNeo: Replicate build changes make for eZ80 and z8 for ZNeo.
24386 - ZNeo compile fixes: Fix misuse of FAR which makes a difference on
24387 this platform. Be consistent in use of WDOG_ID type. ZDS-II doesn't
24388 like auto-conversions of struct wdog_s * to WDOG_ID (which is type
24393 - eZ80: Fix eZ80 compile problems due to New ZDS-II toolchain and
24394 ongoing bit rot due to non-C89 code creeping into the core OS. From
24396 - eZ80: Fix some backward conditional logic in Make.defs. From
24398 - eZ80: Fix a logic error in vector initialization. From Gregory Nutt.
24402 - signal.h: Fix a C89 compliance problem that cause the eZ80 build to
24405 - wqueue.h: Allow definitions even if work queues are not enabled.
24408 - fixedmath.h: Regarding the single precision float to/from fixed
24410 literals should be appended with the letter 'f' to avoid (expensive)
24411 conversions from single to double precision, and thereby also avoid
24415 - stdio: Fix long long usage in all of the newer printf-related
24418 - gm_time_r(): Spurious reorganization of a loop in gm_time_r() to
24419 work around and ZDD-II internal compiler error. Might be a little
24422 - Debug: For platforms whose CPP tool does not support a variable
24423 number arguments to pre-processor macros, we may still need to build
24430 - tools/nxstyle.c: Fix error in conditional logic that was preventing
24431 detection bad brace alignment. Add logic to handle alignment of
24434 - tools/mkexport.sh: The mcu sub-directory chip/ was renamed to
24441 - apps/nshlib: Fix all places where cle() and readline() are used.
24443 value. Checking only for EOF causes failues to be missed (and
24445 - nshlib/nsh_parse.c: Fix a warning about an uninitialized variable
24446 from the ZDS-II compiler. From Gregory Nutt.
24447 - apps/nshlib/nsh_ddcmd.c: Seemingly nonsense change but somehow
24448 works around a compilation error using the ZDS-II toolchain. It
24454 - apps/netutils/netinit: MAC address configuration was represented
24458 - apps/netutils/telnetd/telnetd_daemon.c: Fix a C89 violation that
24459 caused the eZ80 build to fail. From Gregory Nutt.
24460 - apps/netutils/json: Removed. Replaced with apps/netutils/cjson.
24465 - apps/graphics/twm4nx: Fix an uninitialized variable that was
24466 causing toolbar buttons to randomly come up enabled or disabled.
24468 - apps/graphics/twm4nx: Fix a calibration screen startup issue.
24470 - apps/graphics/twm4nx: Revise logic to detect clicks on the
24473 - apps/graphics/twm4nx: Remove some remaining stuff from TWM that
24474 was never used. Menus need to close after the 'terminal' selection
24477 - apps/graphics/twm4ndx: Add a 'critical' bit to the eventID. While
24480 - apps/graphics/twm4nx: CBackground now brings up the main menu if
24484 - apps/graphics/twm4nx: Fix a bug in placement of icons on the
24487 - apps/graphics/twm4nx: Fix some errors found when enabling NX
24489 keyboard drivers need to be opened non-blocking. From Gregory Nutt.
24491 NuttX-8.1 Release Notes
24492 ------------------------
24496 that release consists of two tarballs: nuttx-8.1.tar.gz and
24497 apps-8.1.tar.gz. These are available from:
24502 Both may be needed (see the top-level nuttx/README.txt file for build
24506 change to the OS that makes it more-or-less incompatible with preceding
24507 versions. This release bumps the major version number from 7 to 8 due
24508 primarily to a major reorganization in the what was the configs/ directory
24509 in nuttx-7.31. That directory has been renamed boards/ and now has a
24513 board/ - Holds all board-related information
24514 board/<arch> - Holds board-related information for all boards that use
24515 the same CPU architecture. For example, all ARM-based boards will be
24517 board/<arch>/<chip> - Holds board-related information for all boards
24518 that use the same MCU chip family. For example, all STM32-based
24520 board/<arch>/<chip>/<board> - Holds board-related information for a
24521 specific board. This is analogous to the configs/<board> directory in
24522 nuttx-7.31. So, for example, the STM32F4-Discovery board support that
24525 boards/<arch>/<chip>/<board>/<configs> - All configurations for a
24527 subdirectory. So, continuing the example, the STM32F4-Discovery NSH
24533 changes include changes to tools/, comments, and documentation that depend
24536 This re-organization is the work of Alin Jerpelea. Not only did Alin do
24537 this major directory re-organization, but he ran the code standard
24542 You have to give Alin credit for his effort to take on really big jobs and
24545 A more constrained re-organization of the drivers/ directory was also
24547 directories to make better functional associations and also to make space
24548 for a new set of RF-related drivers.
24551 ---------------------------------------------------
24555 - POSIX Message Queues: Add a test to verify that message queue is
24559 issue: It would be a strange programming practice to open a
24562 - Signal Notifications: Add configuration option to select either the
24563 high-priority or low-priority work queue for SIG_EVTHREA
24565 - System Calls: In order to support built-in in function in protected
24571 parameters. This is a soft limit but still difficult to extend
24572 because it involves assembly language changes to numerous
24573 architectures. Better to get more creative. Rather than extend the
24575 instead to marshal the seven parameters into a structure and pass
24576 only a single parameter: A pointer to the structure containing the
24578 - /etc/passwd and /etc/group: Improve the format of the /etc/passwd
24580 more similar to other systems and includes user and group IDs. Add
24581 also an /etc/group file to support future testing. From Gregory
24583 - User/Group IDs: Implement 'real' setuid, getuid, setgid, and getgid
24584 interfaces is so configured (otherwise fall back to stubs that
24587 - Debug Output: Add debug macros for contactless. The various
24590 ctls[info|warn|err] macros for the overall contactless subsystem to
24592 drivers to use these generic logging macros and fixed some logging
24594 - IOB instrumentation. Introduces producer/consumer id to every IOB
24595 call. This is so that the calls can be instrumented to monitor the
24596 IOB resources and to collect usage statistics. From Anthony
24598 - IOB ProcFS: Adding ProcFS support at /proc/iobinfo to show the data
24600 - Versioning: Report GIT information via ProcFS. GIT info reported:
24606 - BinFS: The BinFS file system uses the same built-in library and
24607 built-in arrays as does NSH. The built-in arrays are simple name-
24608 value pairs that map built-in function names with the user-space
24609 entry point. In the FLAT build, the built-in arrays are available
24612 reference to the user-space built-in array. This commit adds those
24614 used by applications to the provide the built-in list reference to
24616 - MMC/SD: Added support for MMC (eMMC) bigger than 2 GB (Tested with
24618 - AT24CSxx: Register a character driver for UUID of AT24CSxx chips.
24619 Allows the UUID to read as a file or displayed from an nsh prompt with:
24621 - Macronix FLASH: Add support for 4-byte addressing on >128Mb
24623 - MX25Rxx: Add support for 512B sectors. From Simon Piriou.
24624 - SST26: Accept the 16MBit Flash when reading the JEDEC-ID at
24629 - IPv4 Options: Now handles reception of IPv4 packets with larger
24630 IPv4 headers containing options. From Gregory Nutt.
24631 - Sockets: Re-order the content of all address-family socket
24635 - TCP: Make RTO and WAIT_TIME configurable. This fix is not really
24636 correct: TCP RTO really should be calculated dynamically for each
24637 TCP connection: http://sgros.blogspot.com/2012/02/calculating-tcp-rto.html.
24639 - IP Forwarding: Check if interface is up early on when forwarding to
24642 to be sent on each other netdev without regard for whether it is in
24644 caught earlier to avoid unnecessary work, especially in the 6LoWPAN
24647 - RNDIS: Expose option to change the number of write requests that
24649 - GS2200M: Add UDP support. From Masayuki Ishakawa
24650 - GS2200M: Implement GS2200M_IOC_IFREQ IOCTL command. From Masayuki
24652 - GS2200M: Enable NuttX's DHCP client instead of GS2200M's DHCP
24654 - GS2200M: GS2200M now supports SIOCGIFHWADDR From Masayuki
24659 - IEEE802.15.4 Network Driver: Allow 64-bit prefix to be configurable
24660 when auto-configuring the IPv6 address during bring-up. Previously,
24661 only the link-local prefix fe80::/64 was used. Also, put the
24664 - IEEE 802.15.4 MAC: Adds support for energy detect. Adds support
24666 PHY layer is required to perform the energy detect. From Anthony
24668 - IEEE 802.15.4 MAC: Adds support for getting/setting
24671 - IEEE 802.15.4 MAC: Move the global iobuffer into the macnet struct
24674 - IEEE 802.15.4 MAC: Defer handling of extracting association
24675 response to LPWORK queue. From Anthony Merlino.
24676 - IEEE 802.15.4 Radios: Support dynamic FCS length. Adds
24678 IEEE802154_ATTR_PHY_FCSLEN which the radio layer can support to
24679 set/get the FCS length that's added to the end of the frame. One
24680 use case, in promiscuous mode, is to add back in the FCS of the
24681 received frame by increasing the iob->io_len by the FCS length.
24683 - Xbee: Support "WR" AT command for writing parameters to non-
24685 - Xbee: Add configuration option for setting the default prefix
24686 to use when bringing up the network and setting the IP address.
24691 - RTC: If the RTC time is successfully set, then update the current
24692 system time to match. From ligd.
24693 - ADT7320: Add support for the ADT7320 temperature sensor. From
24695 - DAC7554: Add support to the DAC7554 digital-to-analog converter.
24697 - DAT-31R5-SP+: Add support to the DAT-31R5-SP+ digital attenuator.
24698 Creates a the new device driver directory drivers/rf/ to support
24699 drivers related to RF peripherals. It also adds support for the
24700 DAT-31R5-SP+ digital attenuator. From Augusto Fraga Giachero.
24701 - ISL29023: Add basic driver of ISL29023 ambient light sensor. The
24705 - SHT3x: Add Sensirion SHT3x driver. From Markus Bernet.
24709 - Simulator Build: Even though the simulation has no "chips", it
24710 needs to have CONFIG_ARCH_CHIP and chip sub-directories. Otherwise,
24711 we would have to treat it as a special case in the build system
24712 after the changes to the boards/ directory. From Gregory Nutt.
24716 - PIC32MZ. Make the PLL input clock configurable. From Ouss4.
24718 * ARMv7-M
24720 - Add ARMv7-M setjmp/longjump functions. From David S. Alessio.
24724 - i.MXRT Clocking: Enable TRACE clocks if the divider has been
24729 - i.MXRT QEncoder: Adds quadrature encoder driver for IMXRT. From
24731 - i.MXRT uSDHC: This change completes SDIO support for IMXRT, and
24738 dealt with in due course ... I'm trying to get the rest of the
24739 interfaces fleshed out and the hardware proven so it can go for pre-
24740 production build. I _think_ there's only Bluetooth and USB-device
24741 left to implement now. From Dave Marples.
24742 - i.MXRT uSDHC: IMXRT uSDHC driver cmd line reset logic modified.
24747 - Kinetis Serial: Add possibility to specify pull-up instead of
24748 open drain for serial single-wire mode. From Beat K�ng.
24752 - LPC17xx/40xx Build: Cortex-M system reset is applicable to
24757 - LPC17xx/40xx Ethernet: Follow the procedure listed in the
24758 LPC176x/5x User Manual when reading from and writing to the PHY's
24760 after this commit, but nonetheless is a good practice to follow the
24765 - Added architecture support for the NXP S32K1xx family. Basic
24771 - S32K1xx eDMA Leverage eDMA logic from i.MXRT to S32K1XX. Appears
24772 to be the same IP but with fewer channels and features than the
24774 - S32K1xx LPUART: Bring in the LPUART from i.MXRT. It is the same
24776 - S32K1xx SysTick: Bring in Cortex-M0+ SysTick and interrupt handling
24777 from samd2l2; bring in Cortex-M4F Systick and interrupt handling
24779 - S32K1xx GPIO: Bring in GPIO logic from Kinetis. Looks like similar
24781 - S32K1xx Ethernet: Unverified port of the i.MXRT Ethernet driver to
24783 - S32K1xx LPSPI and LPI2C: Brings in the LPSPI and LPI2C peripheral
24789 - S32K118EVB. This commit adds initial board support for the NXP
24792 - S32K118EVB: Implement board support for on-board LEDs and buttons.
24793 This is taken from the Freedom-K66f with has the same LED and
24796 - S32K146EVB: Adds initial board support for the S32K146EVB
24800 - S32K146EVB: Add support for execution out of SRAM. This is helpful
24801 for bring-up when you want to avoid putting a lethal image in FLASH.
24803 - S32K148EVB: Add support for the NXP S32K148EVB development board.
24804 Very similar to the S32K146EVB but with more on-chip memory and
24809 - CXD56xx: Migrate CXD56xx common code to the common/ directory:
24811 - CXD56xx: Add SPH. The SPH is used by the ASMP implementation from
24816 - CXD56xx: Add sensors connected to the SCU on Spresense board:
24829 - CXD56xx: Add the sensor initialization for CXD56xx boards in the
24854 - Spresense: Enable SmartFS and UDP support From Masayuki Ishikawa.
24858 - STM32F4 PLLI2S: Add support to enable the I2S Phase Locked Loop on
24863 - STM32 ADC: Add ADC calibration procedure for IP_ADC_V1. Tested on
24867 - STM32 SPI: TI Synchronous Serial Frame Format. The SPI macros on
24871 - STM32 UART: Serial add HW HS on UART 4 & 5. From David Sidrane.
24872 - STM32 PWM: Configure multi-channel duty only if channel specified.
24873 This allows you to update duty cycle for a single channel. From
24875 - STM32F7 Ethernet: Add a timeout on MAC reset From David Sidrane.
24876 - STM32F7 FLASH: Exposes stm32_flash_xxx functions. From Anthony
24878 - STM32F7 PWM: Configure multi-channel duty only if channel specified.
24879 This allows you to update duty cycle for a single channel. From
24881 - STM32F7 UART: Serial add HW HS on UART 4 & 5. From David Sidrane.
24882 - STM32H7 ADC: Fix internal channel numbers. From Markus Bernet.
24883 - STM32H7 BBSRAM: Add BBSRAM support. From David Sidrane.
24884 - STM32H7 DTCM: Port DTCM from F7 From David Sidrane.
24885 - STM32H7 I2C: Select ARCH_HAVE_I2CRESET in configuration. From
24887 - STM32H7 PWM: Configure multi-channel duty only if channel
24888 specified. This allows you to update duty cycle for a single
24890 - STM32H7 RCC: Fix RCC register definitions and typos for ADC/UART.
24892 - STM32H7 RTC: Ported over F7 RTC. From David Sidrane.
24893 - STM32H7 SPI: Allow more clock sources. From David Sidrane.
24894 - STM32H7 UART: Serial add HW HS on UART 4 & 5. From David Sidrane.
24895 - STM32H7 UART: Fix typo in UART8 configuration. From Markus Bernet.
24896 - STM32H7 UID: Ported UID from F7 From David Sidrane.
24897 - STM32L4 PWM: Configure multi-channel duty only if channel specified.
24898 This allows you to update duty cycle for a single channel. From
24900 - STM32L4 UART: Serial add HW HS on UART 4 & 5. From David Sidrane.
24904 - B-L475E-IOT01A: Add mx25rxx memory chip and smartfs support in NSH
24906 - LX_CPU: Add support for the PIKRON LX_CPU board. From Pavel Pisa.
24907 - Nucleo-F303RE: Add basic NSH configuration. From Mateusz Szafoni.
24908 - Nucleo-F303RE: Enable console on UART2 and set entry point to
24910 - Nucleo-H743ZI: Add RTC support. From David Sidrane.
24911 - Nucleo-L432KC: Added GPIO drivers for use with /apps/examples/gpio.
24913 - Nucleo-L432KC: Added Zero Cross sensor to nucleo-l432kc. From
24918 - Tiva: Add support for Tiva TM4C123AH6PM. From Nathan Hartman.
24919 - Tiva Configuration: Modify preprocessor logic to support
24920 configurations with no UART. Now similar to logic for other
24922 - Tiva Interrupts: Add handling for IRQs 128 thru 159. From Nathan
24927 - TM4C QEncoder: Reinstate TM4C qencoder driver and expand its
24928 ioctls. Add TIVA_HAVE_QEI0, TIVA_HAVE_QEI1 as applicable to each
24933 Rename TIVA QEI ioctl QEIOC_PPR to QEIOC_RESETATPPR; add TIVA QEI
24939 - TM4C1294-Launchpad: Enables /dev/userleds in board bring-up for
24940 tm4c1294-launchpad by calling userled_lower_initialize() in
24945 - Tiva GPTM timers: Implement 16-bit PWM mode. Add
24946 tiva_pwm16_sel_event() to choose GPTMCTL.TnEVENT value. Implement
24947 tiva_pwm_mode16(). This also involved numerous corrections to the
24948 16-bit timer logic. Add tiva_timer16pwm_setperiodduty() to set
24951 tiva_timer16_start() is called. Add tiva_timer16pwm_setduty() to
24953 flags to enable configuring the 16-bit PWM feature. Extend type of
24954 "flags" in tiva_timer32config_s and tiva_timer16config_s from 8- to
24955 32-bits to allow more flags. From Nathan Hartman.
24959 - Export Build: Export all variables/files to support architecture
24961 - Application Export: This change too build tools allows to export
24962 built-in applications registry into temporarily created directory
24965 export continues without interruption. It would be more logical to
24966 print warning but there is no way instruct apps make to not print
24968 - boards/Board.mk: Add support to pass dependency paths. From
24973 - libs/libc/libc.csv: Add some missing C library functions. From
24975 - libs/libc/libc.csv: Add ioctl() to fs_ioctl() wrapper for varidic
24977 - libs/libc/builtin/: Moves shared built-in information out of
24979 with applications. This should permit built-in application in the
24982 - libs/libc/dirent/: Added alphasort() implementation, scandir()
24983 implementation and DT_* definitions to include/dirent.h. Apparently
24986 - libs/libc/grp/: Added stubbed implementations of getgrgid,
24990 The intend is not to provide meaningful new features, but to ease
24991 porting of foreign source code to NuttX. From Michael Jung.
24992 - libs/libc/machine/arm/armv7-m/: Add Cortex M4F machine optimized
24994 - libs/libc/pwd/: Added stubbed implementations. Added stubbed
24998 was 'root' with uid 0. The intend is not to provide meaningful
24999 new features, but to ease porting of foreign source code to NuttX.
25001 - libs/libc/pwd and libs/libc/grp/: Modify to get user/group data
25004 - libs/libc/stdio/: Add support for the size_t integer qualifier 'z'
25005 to the printf family. This is kind of tricky due the variety of
25007 - libs/libc/unistd.h: Added stubbed implementations of setuid() and
25011 respectively. The intent is not to provide meaningful new features,
25012 but to ease porting of foreign source code to NuttX. From Michael
25014 - libs/libc/unistd/: Add getuid() and getgid() stubs to match
25016 - libc/libc/unistd/: Add stubs for geteuid(), getegid(), seteuid(),
25024 - NuttX provides lists of available syscalls and library functions and
25025 tools to process them. The lists can be used to build symbol table
25028 compilation and linking to the final system image has been possible
25030 (CONFIG_EXECFUNCS_GENERATE_SYSTEM_SYMTAB) to build complete list of
25034 requested by EXECFUNCS configuration. I have tried to follow
25036 modes but tested only flat no-MMU build. The basic assumption is
25037 that this library and libraries providing syscall stubs and C-
25038 library functions are available in user-space context and initial
25045 disabled) and main purpose is to lower memory overhead when more
25048 separation. If the table should be provided by kernel to
25049 applications then makefiles has to be adjusted. From Pavel Pisa.
25053 - tools/: Change preferred argument of configurations tools to use
25054 ':' as the delimiter between <board-name> and <config-name>. This
25055 is to emphasize that this is not a path; it is configuration
25058 instructions in README.txt files to show ':' delimiter vs '/'
25059 delimiter. Update all configuration-related tools to accept ':'
25064 - Makefile: Added support for application-specific export target.
25066 - apps/builtins: Move apps/builtins/builtin_forindex.c to
25069 nuttx/include/nuttx/binfmt/built.h to nuttx/include/lib/builtin.h.
25074 - apps/examples/uid: Demo used to verify PASSWD and GROUP interfaces.
25076 - apps/examples/webserver/: Initialilze network and run forever only
25077 if not built-in app. Infer from CONFIG_NSH_BUILTIN_APPS if we are a
25078 NSH built-in app or not. If built-in app (CONFIG_NSH_BUILTIN_APPS
25079 defined) then we assume network is initialized prior to webserver
25086 - apps/fsutils/passwd: Handle the improved the format of the
25087 /etc/passwd file. It is now a little more similar to other systems.
25092 - apps/netutils/dhcpc: Add host name support to DHCP client. From
25097 - apps/wireless/ieee802154/i8sak: I8sak improvements: (1) Adds
25100 fault can occur due to not catching missing arguments. From
25102 - apps/wireless/ieee802154/i8sak: Allow setting the endpoint PAN ID.
25104 - apps/wireless/ieee802154/i8sak: Adds support for energy scan result
25106 - apps/wireless/ieee802154/i8shark: Adds support for intentionally
25107 suppressing passing the FCS so that Wireshark doesn't try to
25109 - apps/wireless/ieee802154/libmac: Adds support for getting/setting
25111 - apps/wireless/gs2200m: Add UDP support to the GS2200M driver. From
25113 - apps/wireless/gs2200m: Add DHCP client handling in ioctl_request().
25115 - apps/wireless/gs2200m: ioctl_request() supports SIOCGIFHWADDR.
25119 ---------
25126 - Priority Inheritance: Fix a race in telnet with PRIORITY_INHERITANCE
25127 and SCHED_HPWORK. Sometimes causes an assertion to fire incorrectly.
25129 - Task Groups: Correct some naming. The NuttX task groups have been
25132 group permissions. So these were all named to grpid and grpid_t so
25133 that it is clearer that these refer to NuttX task group IDs, and not
25134 to group permissions. From Gregory Nutt.
25135 - Task Termination: nxtask_signalparent() in task_exithook.c may
25137 tg_ppid field is use only to remember the parent tasks ID so that it
25138 can send the SIGCHLD signal to it. So it must stay valid until
25140 nxtask_sigchild() to send SIGCHLD to the parent, then invalidates
25147 - sched_get_rr_interval(): sched_get_rr_interval() should return
25148 {0,0} if round-robin scheduling is not selected for the task. From
25150 - SMP Type Collision: The non-standard, non-portable type cpu_set_t
25151 was created specifically to support the NuttX internal, SMP
25152 implementation. Any resemblance to any other cpu_set_t would be
25154 occurred. cpu_set_t has an equivalent, non-standard, non-portable
25156 non-standard type to be defined. Who am I to stand in the way of
25160 - Binary Loader: Change some debug macros from berr() to binfo()
25164 overlooked. The huge output sent to serial terminal slows loading
25166 - Power Management: Fix g_pmcount 16-bits overflow when
25168 - Timekeeping: Fix cases in time conversion that must be >=
25173 - opendir(): opendir() set errno to a negative value in one error
25175 - SmartFS: Update smartfs smart_scan() function. From Simon Piriou.
25176 - ProcFS: Add missing LF to cpuload procfs output From David Alessio.
25177 - MMC/SD: Copy/paste error fix in the SDIO-based block driver for
25179 - MMC/SD: Correct a misplaced #endif in the SDIO-based driver. From
25184 - Ethernet Configuration: Ethernet packet buffer size cannot be
25185 permitted to go below 1294 if IPv6 is selected. From Gregory Nutt.
25186 - TCP RST: Fix outgoing RST packet with wrong ack number. From
25188 - TCP Close: Fix TCP close flow; free the connection after all TCP
25190 - UDP Broadcast: Remove net stack dependency from CONFIG_NET_BROADCAST.
25191 This change allows us to use CONFIG_NET_BROADCAST without network
25194 - UDP: Fixes a UDP send copy-paste error in the new SO_LINGER code:
25195 CONFIG_TCP_NOTIFIER to CONFIG_UDP_NOTIFIER. From Juha Niskanen.
25196 - TCP and UDP: Fix errors in the new implementation of SO_LINGER.
25198 argument to the wrong type, resulting in hangs and abnormal
25199 behavior. There is a complexity in the TCP drain logic when the
25205 - 6LoWPAN: Removes unnecessary conversions that were happening due to
25206 a misunderstanding of byte ordering with EUI-64. From Anthony
25208 - RNDIS: Fix issue with DEBUGASSERT when using composite device and
25213 - wireless network devices: Attach radio to d_buf before registering
25214 device to handle forwarding case. When CONFIG_NET_IPFORWARD is
25216 attempts to get forwarded on the 6LoWPAN interface will require
25217 that the radio's buffer be attached to d_buf. Otherwise an assertion
25223 - IEEE 802.15.4 MAC: Fixes issues with extended address. 1) Extended
25224 address should be read-only. 2) Extended address should be placed
25225 in frame in "reverse-canonical" order. The extended address is a
25226 read-only attribute and thus an attempt to write the extended
25229 bring-up time to the radio layer. The MAC layer now pulls in the
25231 extended address is also supposed to be sent in the frame in
25232 reverse-canonical order. This is very confusing in the standard and
25238 written in reverse-canonical form, meaning the OUI comes last, not
25240 - IEEE 802.15.4 MAC: Frame Version should have been 1, but was being
25241 set to 3 when payload exceeds version 0 capabilities. Adds warning
25242 to build to indicate what is noted in the menu for
25244 - IEEE 802.15.4 MAC: Fixes issue where the txdesc's ackreq flag was
25247 - Xbee: Fix logic to prevent deadlock scenario when there are no
25248 available IOBs From Anthony Merlino (2018-12-21).
25249 - Xbee: Change assumption about destination address mode for incoming
25250 frames. If a short address has been assigned to our radio, then
25253 - Xbee: Initialize the short address to the unspecified address and
25256 - Xbee: Adds CONFIG_XBEE_LOCKUP_WORKAROUND option and corresponding
25257 logic to workaround an issue where the XBee locks up and stops
25261 occasionally the XBee is completely locked up and the XBee has to
25266 - Xbee: Cancel query timeout upon receiving the expected response.
25268 timeout to continue firing repeatedly From Anthony Merlino.
25269 - Xbee: Detect lockup and reset XBee in xbee_req_data From Anthony
25271 - Xbee: Fixes one instance of the use of IOBUSER_WIRELESS_MAC802154
25279 - pipes: Use inode reference counter instead of device reference
25280 counter to handle dup(). I found that if I dup() a pipe, the
25286 - SPI Bitbang: Fix build error when the SPI bitbang variable width
25288 - GPIO Lower Half: Remove limitation when pintype >
25293 - Classic ARM7/ARM9: When performing stability test, the application
25299 Fix is to use a single ldmia to restore R0, R1, and return via R15.
25302 * ARMv7-A
25304 - ARMv7-A: Fix typo and missing quotation for ARMv7-A. From Oki
25306 - ARMv7-A: Fix double increment in armv7-a's
25308 - ARMv7-A: Fix L2 page table mask for ARMv7-A page allocator. From
25311 * ARMv7-M
25313 - Interrupts. Removes the architecture-common
25315 supported only by ARMv7-M). In the normal course of things,
25317 inline function to prevent contention in use of resources that may
25318 be shared between interrupt level and non-interrupt level logic.
25319 Now the question arises, if we are using BASEPRI to disable
25323 the "normal" interrupts? If we are using the BASEPRI register to
25329 Hence, if you need to disable the high priority interrupt, you will
25330 have to disable the interrupt either at the peripheral that
25334 - ARMv7-M Priorities: In the 'normal' case, the priority of the
25338 interrupt response. Fix is to raise the priority of the high
25344 - i.MXRT ENC: Fix some errors in register bit definitions. Noted by
25346 - i.MXRT LPI2C: Slave addresses are now correctly shifted when
25347 sending START. TX/RX FIFOs now discarded on error to prevent FIFO
25348 underflow errors. Fixes error checking to use priv structure and
25354 - PIC32MZ SPI: Fix SPI Mode selection. CKE is the inversion of the
25359 - SAMD2/L2 I2C: Correct time calculation. From Bernd Walter.
25363 - SAM3/4: Add missing DMA configuration Kconfig setting. From Bernd
25368 - LPC17xx/40xx ADC: Only use PCLKSEL0 for ADC on LPC176x family.
25370 - LPC17xx/40xx Ethernet: Set speed back to 10Mbps if 10Mmbps link
25372 - LPC17xx/40xx I2C: Abort I2C transfers if a timeout has occurred.
25375 to the corresponding I2C bus. Failure to do so will result in
25376 memory corruption / undefined behavior as priv->msgs points to a
25379 - LPC17xx/40xx I2C: Calculate the appropriate timeout for I2C
25388 - Kinetis I2C: i2c transfer ensure correct result returned.
25395 - LPC17xx/40xx CAN: If BOARD_CCLKSEL_DIVIDER is not equal to 1 on
25397 because CCLK frequency does not correspond to PLL0 clock which is
25399 be probably better to define BOARD_PCLK_FREQUENCY even for LPC176x
25400 targets and use that to replace divisor by base_clock in up_dev_s.
25405 - LPC17xx/40xx Ethernet: Add missing LPC17_40_PHY_CEMENT_DISABLE
25406 variable to the lpc17xx/40xx Kconfig file. For some reason this
25409 - LPC17xx/40xx Ethernet: Fix the initialization for DP83848x PHYs.
25410 The DP83848x requires the RMII mode to be manually enabled through
25412 it should wait for the link to be established. From Augusto Fraga
25417 - i.MXRT LPUART: Fix some errors in the LPUART register definition
25419 be imxrt_earlyserialinit(). Remove prototypes for non-existent
25421 - i.MXRT USDHC: uSDHC typo fixes and command transfer error handling
25426 - EFM32 OTG host: Adam Porter's various fixex for STM32 FS/HS
25427 probably should be applied to EFM32 host which which has very
25432 - STM327F Configuration: Kconfig add depends on BBSRAM. From David
25434 - STM32F7 Interrupts: Fix overwritten IRQ enable. System boot order
25437 This most likely worked in the past due to a bug in the NVIC
25438 initialization code that failed to clear the Interrupt enables.
25439 - STM32H7: Rix BBSRAM name in memory map. From David Sidrane.
25440 - STM32H7: Removed f7 in file path. From David Sidrane.
25444 - STM32H7 BBSRAM: Fix issues causing no writes and hardfaults. From
25446 - STM32H7 BBSRAM: Convince compiler to perform 32 bit write. From
25448 - STM32F7 OTGHS: Fixes bad preprocessor logic preventing USB OTG HS
25449 to work when used without external ULPI. From Anthony Merlino.
25450 - STM32 OTGH[FS|HS] Host STM32 host only initiates transfer if
25452 - STM32F7/H7/L4 OTG host: Adam Porter's fix for STM32 FS/HS probably
25453 should be applied to STM32 F7, H7, and L4 OTG host which are very
25455 - STM32/F7/H7/L4: This change was required to get my devices
25456 (CDC-MBIM) to enumerate. Initially the system timed out retrieving
25463 'timeout'. The fix I implemented moves the DATANAK timeout loop to
25464 only apply to the Status OUT. Both the ctrl IN and the Status OUT
25466 - STM32F7 SDMMC: If there is only one SDMMC it is slot 0 From David
25468 - STM32F7 USART1: USART1_RXDMA is dependent on STM32F7_DMA2 not
25470 - STM32H7 DBGMCU: Memory Map DBGMCU is @ 0x5c001000 From David
25472 - STM32F7 SDMMC: Fix warning when DMA is not enabled. From David
25474 - STM32H7 Ethernet: Fix some errors in Ethernet MAC configuration.
25476 - STM32H7 Ethernet: Correct stm32h7 mac address filtering. Correct
25478 flag. Now the Ethernet driver only receives packets addressed to
25480 - STM32H7 Ethernet: Correct memory corruption error. The Ethernet
25481 driver initialization incorrectly wrote to DMACRXCR instead of
25482 DMACSR when trying to clear the stopped flags. This caused
25483 invalid buffer length in the DMACRXCR, causing DMA to overflow the
25484 RX buffers when large packets are sent to the device. From Jukka
25486 - STM32H7 PWR: Ensure data is flushed on backup domain access
25488 - STM32H7 Serial: Serial fix undefined with TERMIOS From David
25490 - STM32H7 UARTs: Fix UART7/8 typos. Fix bug in ETH_MACQTXFCR
25495 - Multiple STM32 Boards: If CONFIG_SCHED_CRITMONITOR is selected,
25499 - Nucleo-H743ZI: Correct logic that determines if the RTC driver is
25501 - Nucleo-G071RB: Fix linker script to avoid .ARM.exidx section
25503 - Modify all linker scripts (all boards, all architectures) to use
25505 - Nucleo-L432KC ADC: Change analog pins definitions and correct DMA
25510 - Tiva Configuration: Rename TM4C123GH6PMI identifiers to
25515 which means it doesn't make sense to differentiate between PM and
25516 PMI. (The PM means 64-LQFP. The I means temperature range -40C to
25517 +85C. It could be T meaning -40C to +105C. The R means it ships in
25518 Tape and Reel packaging as opposed to Tray.) From Nathan Hartman.
25519 - Tiva Configuration: Rename TM4C1294NC identifiers to TM4C1294NCPDT.
25520 Rationale: TM4C1294NC is ambiguous: TM4C1294NCPDT is a 128-TQFP,
25521 TM4C1294NCZAD is a 212-NFBGA. The TM4C1294NC part currently
25522 supported by NuttX is the TM4C1294NCPDT used on the TI EK-TM4C1294XL
25523 "Connected LaunchPad" (see configs/tm4c1294-launchpad). To ensure
25525 TM4C1294NC identifiers to TM4C1294NCPDT. From Nathan Hartman.
25526 - Tiva Configuration: Fix TM4C129XNCZAD part number in Kconfig and
25527 identifiers. Rationale: Fully specify that this is the 212-pin BGA
25528 package (ZAD ending) and for consistency with earlier changes to
25534 - Tiva TM4C 1-Wire: Fix wrong description on define TIVA_1WIRE_BASE:
25535 Was "EEPROM and Key Locker" (same as the item above). Now "1-Wire
25541 - Tiva GPIO Interrupts: LM3S, LM4F, TM4C: Fix GPIO IRQ error, ports
25546 - Tiva Timers: Fix minor errors in tiva_timerlib.c. Fix incorrect
25547 preprocessor conditionals related to Kconfig defines:
25548 CONFIG_TIVA_TIMER32_EDGECOUNT -> CONFIG_TIVA_TIMER16_EDGECOUNT,
25549 CONFIG_TIVA_TIMER32_TIMECAP -> CONFIG_TIVA_TIMER16_TIMECAP,
25550 CONFIG_TIVA_TIMER32_PWM -> CONFIG_TIVA_TIMER16_PWM. From Nathan
25552 - Tiva Timers: Fix errors in low-level timer support.
25557 - Tiva Timers: Fix one code error and some comment errors.
25559 TIMER16_MODE. Fixed to DEBUGASSERT on mode == TIMER16_MODE.
25564 - z80sim Serial: Fix uart_dev_t initializer: pollfds[] is a array of
25567 - z80sim Interrupts: Missed a name change up_irqinitialize to
25572 - include/netinet/in.h: Rename __pad member to sin_zero in struct
25574 sockaddr_in objects to zeros. Apparently, judging from mailing list
25578 the 'nuttx' nor in the 'apps' repository did I find any reference to
25579 this identifier. Thus, I believe its a safe bet to just rename it.
25582 sin_family, sin_addr, and sin_port. It is acceptable for a POSIX-
25583 compliant implementation to define additional structure members, and
25588 - libs/libc/libc.csv: Correct dependency of setlocale on
25590 - libs/libc/machine/arm/armv7-m: Fix build error for ELF. From
25592 - libs/libc/math.csv: Correct format of some function entries. From
25597 - tools/: Change all occurrences of /bin/(ba)sh in shell scripts to
25602 - apps/nshlib/: As noted by David S. Alessio, 'cat' should not output
25604 additional newline was added to assure that the NSH prompt was
25608 written to the standard output." Reference:
25613 other commands implemented via nsh_catfile(). That remains to be
25618 - apps/system/cle/: ASCII DEL should be treated by Delete-Left. From
25620 - apps/system/i2ctool: (1) Friendlier I2C "knock-knock" uses only
25624 attempting to index to "Reg[0]" alters its contents to 0x00
25626 simply trying to read something/anything from the slave. This also
25630 Reg[80]-Reg[8F] and will NAK a read of Reg[0]. (2) Modify get/set
25631 to prevent write of reg index if not specifed From David Alessio.
25635 - apps/netutils/dhcpd: Fixes bug where hwaddr was being used instead
25636 of ipaddr in the ARP update. This bug seems to have been introduced
25637 three years ago during a rewrite to remove a direct OS call to arp.
25639 behavior I was observing was that the DHCPD would go to offer an IP
25641 didn't know where to send the data. From Anthony Merlino.
25642 - apps/netutils/netinit/: Remove warnings. Unhook PHY notification
25648 - apps/wireless/ieee802154/i8sak: Fixes conversion from extended
25649 address to IPv6 address. From Anthony Merlino.
25651 NuttX-8.2 Release Notes
25652 ------------------------
25656 that release consists of two tarballs: nuttx-8.2.tar.gz and
25657 apps-8.2.tar.gz. These are available from:
25662 Both may be needed (see the top-level nuttx/README.txt file for build
25666 ---------------------------------------------------
25670 - Signals: Add support for SIGPIPE default action. SIGPIPE uses
25673 - Spinlocks: Remove support for re-entrant spinlocks. They seemed
25675 - Memory Manager: Remove the assumption that one character equals
25677 - Power Management: Historically, the NuttX PM subsystem has
25681 This change decouples that upper activity-based logic from the lower
25683 logic (such as a custom, application-specific state machine). From
25685 - boardctl(): Expose power manager function through boardctl()
25690 - GD25: Add support for a new FLASH vendor. From zhangbo_a.
25691 - GD25: Add support for GD25 device with 256-Mbit capacity. From
25693 - GD25: Add 4-byte address operation for capacity larger than
25694 128-Mbit. From YanLin Zhu.
25695 - GD25: Add gd25_lock/unlock to case: enable 4-bytes address From
25697 - GD5F: Add gigadevice SPI NAND FLASH driver. From YanLin Zhu.
25701 - Networking: Use ntoh() when printing IPv6 addresses so that the
25704 - Netlink: Implement minimal NETLINK_ROUTE socket functionality that
25705 can (for now) be use used to obtain a list of network devices, IPv4
25706 ARP and IPv6 Neighbor tables, and IPv4 and IPv6 routing tables.
25711 - BCM43438A1 Bluetooth: Add support for the BCM43438A1 Bluetooth
25713 - HCIUART Shim: Add a serial 'shim' to allow any regular serial port
25714 to support a Bluetooth H4 interface and to be used to drive a
25716 - BCM4343x HCIUART: BCM4343x HCIUART support. From Dave Marples.
25717 - BCM43xxx: Move drivers/wireless/ieee80211/ to
25720 - GS2200M: Add reset handler to interface. Add reset and un-reset
25725 - Audio: Add message type to support audio trigger. From anchao.
25729 - Altair: Add support for the altair LTE modem driver. From Alin
25731 - MCP2515: MCP2525 SPI STD-EXT ID fixes. From DisruptiveNL.
25732 - OpenAMP: Brings in the drivers needed to support OpenAMP. These
25735 gave authorship to Guiding Li because he has the largest number of
25741 - Simulator: Add stack coloration feature. From ligd.
25742 - Simulator: Report PM activity on simulated UART. From Matias
25744 - Simulator: Add host ftruncate() support. From chao.an.
25745 - Simulator: Replace all CONFIG_DEV_CONSOLE with USE_DEVCONSOLE for
25748 - Simulator OpenAMP: Support OpenAMP between two simulator
25752 * ARMv7-M
25754 - ARMv7-M: Add BPIALL register address. From Dave Marples.
25755 - ARMv7-M MPU: Add user peripheral helper
25759 - Arduino-M0: Add initial board support for the Arduino M0 which is
25765 - i.MXRT LCD: Add support for LCD. Clean up some LCD-related
25767 - i.MXRT Serial: This change improves the performance of UART serial
25771 - i.MXRT Pin Mux: This change separates out the pinmux and iomux
25774 things: (1) unifies the iomux definitions - previously some pins
25775 had them, and some didn't. This effectively made it impossible to
25778 pin now has a suffix. This makes it *much* easier to see when a pin
25781 - IMXRT1020-EVK: Add support for the MIMXRT1021-EVK board. It
25787 - IMXRT1060-EVK: Add basic LCD support for the board IMXRT1060-EVK.
25789 - IMXRT1060-EVK: Added Littlevgl demo configuration into the
25790 IMXRT1060-EVK board directory. From Fabio Balzano.
25794 - Kinetis Ethernet: Add support for TJA1100 PHY. From David Sidrane.
25798 - S32K1xx: Support configuration and initialization of the flash
25803 - S32K1**EVB: Create a special FLASH section to hold the FLASH
25805 - S32K146EVB: Added configuration script and instructions for using
25806 Thread-Aware OpenOCD for the S32K146 with Eclipse. From Han
25811 - RX65N: Adds a port of to the Renesas RX65N Micro-controller. This
25817 - RSK RX65N-2MB: Add support for the RSK RX65N-2MB board. From
25819 - GR-Rose: Add support for the GR-Rose board. From Anjana.
25823 - CXD56xx CPU FIFO: Add configurations for CPU FIFO elements. From
25825 - CXD56xx Loader: Update loader and gnssfw ver. 17660. From Alin
25827 - CXD56xx SMP: Add support for SMP. To run cxd56xx in SMP mode, new
25830 - CXD56xx SMP: Add IRQ routing for SMP in cxd56_irq.c. In CXD56xx,
25832 APP_DSP (Cortex-M4F) only. This change supports IRQ routing for SMP
25838 - CXD56xx I2C: Add ability to set the i2c frequency to other than just
25840 - CXD56xx SDHCI: Reduce power consumption by stopping SD clock. Re-
25841 enable SD clock during access to SD card. Improve GNSS low
25846 - CXD56xx Board Common: Add the Altair LTE modem support on the
25848 - CXD56xx Board Common: Add Spresense Image Processor. Enable support
25851 - Spresense: Add board specific pin configurations of CXD5602 pins to
25853 - Spresense: Add a configuration option to select if an extension
25854 board is attached to the SPresence. If there is no extension board
25855 attached, the SPresense may run in a low-power mode by default (as
25857 extension board is present, then the SPresense will need to run at a
25860 - Spresense Camera: Add ISX012 camera initialization and
25862 - Spresense OS test: Enable ostest in rndis/defconfig and
25864 - Spresense: Add --gc-sections to LDFLAGS and add -ffunction-sections
25865 and -fdata-sections to ARCHCFLAGS in scripts/Make.defs. From
25867 - Spresense SMP: Add smp configuration. From Masayuki Ishikawa.
25868 - Spresense SCU: The SCU has to be initialized at bootup on Spresense
25872 - Spresense: Add audio and board audio control implementation. From
25874 - Spresense: Sdd power_control and audio_tone_generator. Add a simple
25875 way to control the audio buzzer with defined frequency for user-space
25877 - Spresense: Add the optional initialization of GNSS and GEOFENCE at
25879 - Spresense: Add LTE configuration. From Alin Jerpelea.
25880 - Spresense: Enable high current mode for the Spresense Extension
25882 - Spresense: Add lcd examples configuration. This is a configuration
25887 - STM32F0/L0/G0: Add support for STM32G070xx family. From Daniel
25889 - STM32F0/L0/G0 Power: Scale dynamic voltage and flash wait states
25892 - STM32L4R5ZI: Add support for the STM32L4R5ZI chip type. From Jussi
25894 - STM32 L4+ DMA: Add DMA support for STM32L4+ series. From Jussi
25896 - STM32 L4 Clocking: Enable "Range 1 boost" mode if any PLL freq
25898 - STM32 L4 LPTIM: Add support for LPTIM timers on the STM32L4 as PWM
25900 - STM32 H7 Progmem: Add FLASH progmem support. From David Sidrane.
25904 - STM32 Serial: Single Wire add pull{up|down|none} via new IOCTL
25906 - STM32 F0/L0/G0 Serial: Single Wire add pull{up|down|none} via
25908 - STM32 F0/L0/G0 PWM: Add PWM support. From Daniel Pereira Volpato.
25909 - STM32 G0 TIM: Support timers available on STM32G070. Includes TIM1
25910 PIOs, TIM driver lower-half. From Daniel Pereira Volpato.
25911 - STM32 F7 Serial: Single Wire add pull{up|down|none} via new IOCTL
25913 - STM32 H7 BBSRAM: Exclude BBSRAM from cacheable when
25916 BBSRAM memory range to non-cacheable. From David Sidrane.
25917 - STM32 H7 SDMMC: Add SDMMC support and IDMA as well as interrupt
25918 driven transmission. Support pull-ups and SDIO. From David Sidrane.
25919 - STM32 H7 Serial: Single Wire add pull{up|down|none} via new IOCTL
25921 - STM32 L4 OTGFS: Enable OTGFS for STM32L4+ series. The OTGFS
25924 - STM32L4 IDLE Loop: (1) Added BEGIN_IDLE()/END_IDLE() to stop call
25927 call to pm_changestate() to inform drivers we're back to running
25928 after the call to stm32l4_stop() returns. From Matias N.
25929 - STM32 L4 Serial: Single Wire add pull{up|down|none} via new IOCTL
25934 - Nucleo-G070RB: Initial support for board STM32 NUCLEO-G070RB,
25935 including NSH config. Enables PWR peripheral and set SYSCLK to
25937 - Nucleo-G070RB: Enable basic timers. Add TIMx clock frequencies to
25939 - Nucleo-G070RB: Add PWM support and GPIO_TIM3_* mappings. Add a PWM
25941 - Nucleo-G070RB: Add button driver support, Add driver support. Add
25943 - Nucleo-L476RG: Add required definitions if libcxx is enabled. From
25945 - Nucleo-L476RG: Add support for LPTIM timers as PWM outputs. From
25947 - Nucleo-H743ZI: Added GPIO device driver for user-space apps. From
25949 - olimex-stm32-e407: Newer Olimex E407 boards are populated with
25951 - STM32F4-Discovery: Add support for external DS1307 module. From
25953 - STM32F4-Discovery: Add support for MMCSD_SPI. This change works
25956 - STM32F4-Discovery: Add support for gs2200m. Works with mikroe
25961 - TM4C129ENCPDT: Add support for Tiva TM4C129ENCPDT. From Nathan
25966 - TM4C123G-Launchpad: SPI CAN functionality on TM4C123GXL. From
25971 - tools/Config.mk: Eliminate use of the built-in implicit rules.
25973 - tools/Config.mk and Makefile.unix: Support the incremental build
25975 - tools/Config.mk: Support the ability to change the CFLAGS for
25979 $(SRCDIR)/hello_main.c_CFLAGS = -DTEST. From Xiang Xiao.
25980 - Configuration: Auto-select CONFIG_BUILD_LOADABLE when either
25986 - libs/libc: Add CONFIG_MODLIB_SYSTEM_SYMTAB to generate the symbol
25988 - getdelim() and getline(): Add implementations of the POSIX
25990 defined, getline() canot be used on platforms that use CR-LF lin
25992 - alarm(), setitimer(), and getitimer(): Implement alarm(),
25997 - tools/mkexport.sh: Copy the essential build script files too and
25998 move Make.defs/gnu-elf.ld into scripts like board folder layout.
26000 - tools/mkexport.sh: Should export full content for FLAT build even
26002 - tools/testbuild.sh: Add an option to select the number of CPUs to
26004 - tools/indent.sh: Add a command line option to suppress reformatting
26008 - tools/nxstyle.c: Add detection of carriage returns. Improve
26010 - tools/nxstyle.c: Add logic to detect if there is a blank line
26012 - tools/nxstyle.c: Eliminate false alarm errors on comments that are
26013 to the right of code when the comment terminator is on the same
26015 - tools/nxstyle.c: Eliminate false alarms when checking for
26016 alignment of comments to the right of code. Fix check for C++ style
26019 - tools/nxstyle.c: Eliminate false positive 'Invalid character after
26024 - apps/ Build System: Numerous changes for improvements and general
26025 clean-up of the apps/ build system. Too many small and individual
26026 changes to list here. Includes many improvements related to loadable
26029 - apps/Application.mk: Support the ability to change the CFLAGS for
26033 $(SRCDIR)/hello_main.c_CFLAGS = -DTEST
26035 - apps/Application.mk and main.c files: Change builtin's entry point
26036 from main to xxx_main by macro expansion. This change make the
26042 - apps/examples/audio_rttl: Add a simple RTTL player demo that is
26043 able to play tunes according to an RTTL song. From Alin Jerpelea.
26044 - apps/examples/bmi160: Add bmi160 example app. This app will read
26046 - apps/examples/charger: Simple charger example that will display on
26048 - apps/examples/netlink_route: Add test/example of NETLINK_ROUTE
26053 - apps/nshlib/: Add rptun cmd for boot remote core. From ligd.
26054 - apps.nshlib/: Add a -t option to the arp command which will enable
26056 - apps/nshlib/: Add new NSH command, 'pmconfig'. From ligd.
26060 - apps/system/cle: Add basic color support to the CLE editor.
26062 - apps/system/i2c: While many I2C slave devices have multiple
26065 Register, attempting to index to "Reg[0]" alters its contents to
26067 problem by simply trying to read something/anything from the slave.
26071 number at Reg[80]-Reg[8F] and will NAK a read of Reg[0]. Modified
26072 get/set to prevent write of reg index if not specified.
26073 - apps/system/i2c: Added a 'dump' command to issue a single
26074 transaction to retrieve multiple bytes from an I2C slave and
26076 - apps/system/spi: Add options to specify devtype, id for chip
26078 - apps/system/symtab: Remove system/symtab since the same
26080 - apps/system/usrsock_rpmsg: Add rpmsg based usrsock implementation.
26085 - apps/netutils/cjson/: Update default version to 1.7.12. Previous
26088 - apps/netutils/netlib/: Add a function to read the entire ARP table
26090 - apps/netutils/netlib/: Add support for retrieving a snapshot of the
26092 - apps/netutils/netlib/: Add a utility function that will return a
26094 - apps/netutils/netlib/: Add function to retrieve routing tables
26098 ---------
26105 - Signals: Fix undefined reference from sig_default.c to
26108 - waitpid(): Fix a NULL pointer dereference on race without
26110 - WD Timers: Back out a kludge-workaround in wd_start for an SDCC
26112 to conflict with newer GCC versions using (unsupported) warning
26113 options and SDCC no longer needs the work-around. From Gregory
26115 - clock_systimespec(): Fix early timespec overflow if using 32 bit
26117 - Spinlocks: spin_trylock handle memory barrier and instrumentation
26119 - Power Management: Fix a problem where a timer cannot start when it
26121 - boardctl(BOARDIOC_MKRD): This change corrects a problem with NSH:
26126 - boardctl(BOARDIOC_ROMDISK): Add support for the new
26127 BOARDIOC_ROMDISK command. This allows applications to create ROMFS
26128 block drivers without illegal direct calls to romdisk_register.
26132 - SmartFS: Fix O_CREAT without O_TRUNC truncating existing file.
26135 - SmartFS: Honor O_APPEND on writes. Also document pwrite() bug/
26137 - GD25: spi_devid argument was not used in initialization. GD25
26138 driver was always using priv->spi_devid initialized to zero by
26141 - MMC/SD: Set wrbusy after success of all the operations. Any
26144 - MMC/SD: Enter a removed card state On a failure. If we fail to
26146 and set the card to removed. From David Sidrane.
26147 - MMC/SD (SDIO): Align DMA buffer for MBURST size. From David S.
26152 - Socket close(): Fixed problems noted by Bernd Walter: Eliminate an
26158 disconnection event and that can lead to hangs (or at least very,
26160 - ICMPv6: Dispatch ICMP_POLL to device's callback list too since
26163 - ICMPv6: Decouple autoconfig and ICMPv6 socket to avoid an invalid
26165 - ICMPv6: cmpv6_autoconfig() error handling must not overwrite
26167 - TCP/UDP: Fix a chicken and egg problem by eliminating the check of
26169 1. For buffered TCP/UDP case, if CONFIG_NET_ARP_SEND /
26174 buffer to generate the ARP/ICMPV6 packet.
26175 2. For all other case, the TCP layer or user program should already
26182 - UDP sendto(): Add a check for the device that is polling. In the
26183 multiple network device case, this check is necessary to prevent
26184 sending the UDP packet to the wrong device. From Gregory Nutt.
26188 - MRF24J40: Correct erroneous isolation of address mode field and
26190 - GS2200M: Add SPI_SELECT() to _read/write_data() in gs2200m.c
26191 - BCM43xx Wireless: In the SDIO interface, the behavior of the DMA
26204 - Various drivers (Cloned logic): On error, memory was freed, but
26207 - Serial: Fix data corruption when outputting data in SMP mode From
26209 - Serial: serial_io.c used signal numbers, but did not include
26212 - Serial DMA: Avoid uart_xmitchars_done() move the tail bigger then
26217 - mkfifo(): mkfifo() should return -1 and set errno on failure From
26219 - RAMLog: Fix ramlog readers never awakened up when using ramlog as
26220 syslog or console. We also make an attempt to avoid the thundering
26225 - USB CDC/ACM: Fix memory leak of RX failsafe timer. From Juha
26227 - USB HID Keyboard device: Fix keyboard debounce algorithm used when
26229 - USB HID Keyboard: Change default for CONFIG_HIDKBD_POLLUSEC per
26231 - VL53L1X IOCTLs: IOCTL commands for the VL53L1X did not follow the
26233 - syslog: syslog_force does not set errno so do not test against it.
26235 - syslog: Fix assertion that assumes re-opened syslog file is the
26242 - Simulator HostFS: Skip '.' and '..' in readdir' From Xiang Xiao.
26243 - Simulator HostFS: Fix warning: 'mapflags' may be used uninitialized
26245 - Simulator Tickless: Correct the calculation of the Tickless timer
26248 - Simulator: Add -m32 to HOSTLDFLAGS if enable CONFIG_SIM_M32. From
26250 - Simulator PM: Fixes compilation for sim target when enabling power
26252 - Simulator Build: Fixes missing recursion into sim board directory
26254 - Simulator SIMUART: Remove CONFIG_SIM_UART_DATAPOST for arch/sim.
26255 It's very dangerous to call NuttX API from simuart_thread. From
26258 * ARMv7-A
26260 - ARMv7-A: Apply Masayuki Ishakawa's change for ARMv7-M to this SMP
26263 * ARMv7-M
26265 - ARMv7-M: Fix a deadlock in up_sigdeliver() in SMP mode. In
26269 progress on CPU0 and CPU1 has called up_cpu_paused to CPU0, hence
26271 deadlock in later call of enter_critical_section() to restore
26272 irqcount. To avoid this situation, we need to call
26273 enter_critical_section() to break the deadlock. From Masayuki
26278 - SAM4CM: Fix cpustart() implementation. In Cortex-M, offset 0 in
26284 - SAMA5D4-EK: Fix bad conditional compilation for
26290 - i.MXRT WFI: WFI needs to be disabled on i.MXRT. We found the
26291 reason: The imxrt1050 is configured to use SYSTICK for the kernel
26292 timer, but SYSTICK cannot wake up the MCU from low-power modes.
26293 Disable low-power modes on this MCU until we have support for an
26295 had A0 silicon which by default did not enter low-power mode on a
26302 - i.MXRT Serial: TC (Transmission complete) and TDRE (TX Buffer
26310 - IMXRT1020-EVK: Make naming of the LED consistent. In most places
26311 it is referred to as LED1. In board.h it is referred to as
26312 USERLED1. The i.MXRT1020-EVK hardware user guide (HUG) uses the
26319 - TWR-K60N512: Suppress errors related to card detect GPIO
26324 - lpc17xx/40xx I2C: Respect the I2C_M_NOSTART flag. Sending a
26327 - LPC17xx/40xx Ethernet: Use usleep() instead of up_delay() for large
26332 - LPC54 Clocking: Fix PLL settings. For the lpc54628 Rev. E board
26340 - IMXRT1060-EVK: Fix FT5X06 CTRSTn pin configuration, increased
26346 - LC823450: Fix cpustart() implementation. In Cortex-M, offset 0 in
26349 - LC823450-XGEVK: Fix build error for posix_spawn. From Masayuki
26354 - CXD56xx Assertions: Replace some assertions with error return
26356 - CXD56xx Interrupts: Fix hang-up when error interrupt occurs. From
26358 - CXD56xx Pin Configuration: PIN_AP_CLK is used as a port selector of
26361 board. To avoid this restriction, remove this initial operation
26364 - CXD56xx: Remove duplicate NVIC_SYSH redefinitions. The NVIC_SYSH
26369 - CXD56xx SDHCI: Fix initial value of semaphore in sdhci driver.
26374 - Spresense: The SD Card TXS02612 port expander is hosted on the
26380 - STM32 F4 Pin Multiplex: Ethernet pin ETH_RMII_REF_CLK is an input.
26382 - STM32 H7 ADC: Fix typos in ADC register definitions. From Markus
26384 - STM32 H7: Heap allocation, SRAM and SRAM1 are not continuous From
26386 - STM32 H7 CRC: Add the CRC option in KConfig. From Eduard Niesner.
26387 - STM32 H7 RCC: Add PLL3 Support and only enable PLLs if used. From
26389 - STM32 L4x6xx RCC: This fix is needed if HSI clock is selected.
26395 - STM32 USB Host: There was no relationship between
26398 causing link time failures. This change adds logic to select
26403 - STM32 SDIO: SDIO Fix system hang on card eject. From David Sidrane.
26404 - STM32 F7 Ethernet: Large Ethernet packet can leads network halt.
26406 - STM32F7 OTGHOST: OTGFS_EPTYPE_INTR should be OTG_EPTYPE_INTR. From
26408 - STM32 F7 SDMMC: SDMMC Fix system hang on card eject. From David
26410 - STM32 L4 Firewall: Correct a test to determine if an address lies
26411 in FLASH or not. Improper mask caused test to always fail. From
26413 - STM32 H7 Ethernet: Bazooka Joe's fix to the STM32 F7 Ethernet
26414 driver should be applied to the H7 as well. The other STM32
26416 - STM32 H7 Ethernet: Fix ETH_MACMDIOAR_CR_MASK bit mask. From Markus
26418 - STM32 H7 SDMMC: SDMMC Fix system hang on card eject. From Gregory
26420 - STM32 H7 FLASH: Flash driver BUG fixes. From David Sidrane.
26421 - STM32 H7 TIM: Correct register bit definitions and alternate
26422 functions. Fix other copy-paste definitions. From Daniel Pereira
26424 - STM32 L4 SDMMC: SDMMC Fix system hang on card eject. From David
26429 - STM32F4-Discovery: Fix build error for posix_spawn. From Masayuki
26434 - TIVA IRQs: Fix wrong IRQ vector number. From Nathan Hartman.
26435 - Tiva FLASH: Fix several mistakes in tiva_write(). (1) Fix wrong
26436 use of && when & was intended. (2) Add compile- time warning
26437 directive because according to this function's interface, it is
26438 supposed to support unaligned writes and/or writes of arbitrary
26439 numbers of bytes to FLASH. However, this function does NOT support
26440 that at this time. This needs to be fixed. (3) Fix wrong
26441 preprocessor conditional. Was written to use the 32-word write
26445 comments to document the intent of the above preprocessor logic.
26450 - Xtensa: Apply Masayuki Ishakawa's change for ARMv7-M to this SMP
26455 - Makefiles: Change ${shell pwd} to $(CURDIR) since pwd doesn't exist
26457 - tools/Makefile.unix: Fix build error when issue 'make -B': "mkdir:
26461 - All ARM linker scripts: Preface all _ebss definitions with '. =
26464 - MIPS Linker Scripts: The PIC32M* start-up code initializes .bss by
26466 is only required to be 4 bytes since the write is done with 4 store
26468 - Top-level Kconfig: Add some protection so that you cannot select an
26469 architecture-specific header file if the architecture does not
26471 - libc Kconfig: Should select the NuttX float.h file automatically
26473 - tools/Makefile.unix: Make COMMON_DIR work with
26475 - tools/ Make fragments: Fix the various minor issue for NUTTXLIBS /
26484 - getcwd(): Remove stray sched_unlock(). Also fixes several typos.
26486 - date(), hostname(): Fix portability issue with date, hostname From
26488 - libs/libxx/Kconfig: Automatically select CONFIG_CLOCK_MONOTONIC when
26489 CONFIG_LIBCXX is selected. Removed hardcoded -DCLOCK_MONOTONIC from
26493 - libs/libxx/Kconfig: CONFIG_LIBC_LOCALE is needed to build libcxx.
26494 A math library is also needed, however, there are various ways to
26497 - libs/libc/symtab: Move symbol table generation into libc since the
26500 - libs/libc/ Kconfig files: Disable EXECFUNCS_HAVE_SYMTAB for kernel
26505 - include/sys/time.h: According to earlier standards, usage of
26508 sys/select.h in time.h to compatible with it. Or mbedtls library
26514 - tools/configure.sh and configure.c: Do not remove CONFIG_SIM_M32 if
26516 - tools/Directories.mk: Remove FSDIRS/NOFSDIRS related logic/comments
26519 - tools/Makefile.host: Add missing binaries from clean target. From
26521 - tools/mkromfsimg.sh: Use sed to add const to ROMFS declarations so
26523 - tools/nxstyle.c: Correct detection of missing blank line following
26528 - Makefiles: Change ${shell pwd} to $(CURDIR) since pwd doesn't exist
26530 - Makefile: Fix warning: jobserver unavailable: using -j1. Add '+' to
26532 - apps/Application.mk: Correct an error in PATH usage. Use of
26537 - tools/mkromfsimg.sh: Use sed to add const to ROMFS declarations so
26542 - apps/examples/mount: Replace illegal call to ramdisk_register()
26543 with a call to boardctl(BOARDIOC_MKRD). From Gregory Nutt.
26544 - apps/examples/nxlines/: Correct nxlines example program name. From
26546 - apps/examples/nxterm/: PROGNAME, PRIORITY, STACKSIZE variable
26549 - apps/examples/romfs: Remove romfs_testdir.h. That file is
26555 - apps/testing/cxxtest/: Fix typo error in testing/cxxtest. From
26557 - apps/testing/unity/: Fix the error when creating Make.dep. From
26562 - apps/nshlib: Remove the inappropriate NSH_BUILTIN_APPS coupling.
26564 - apps/nshlib/: The NSH mkrd command was in violation of the NuttX
26570 all build modes. The effect of this change is to move the heart of
26571 the NSH mkrd command into to OS and provide user-space access via
26573 - apps/nshlib/: Replace direct calls to romdisk_register() with
26578 - apps/nshlib/: Add missing NSH_DISABLE_DMESG from Kconfig. From
26583 - apps/system/cle/: This change modifies the cle to use the streams
26588 - apps/system/composite: Remove usb serial loopback test code we can
26590 - apps/system/cu/: (1) Fix early exit. getc(stdin) can return 0 the
26591 first time around. (2) Set optind to zero. getopt() was being
26592 left in a bad state, causing parsing errors on second use. (3) Fix
26593 priority of cu_listen(). (4) Add suppor for -h. From David
26595 - apps/system/lzf/: Check the protection by CONFIG_SYSTEM_LZF !=
26598 - apps/system/spi: Correctly parse exch txdata args, if any. Should
26603 - apps/fsutils/passwd/: Use named semaphore by checking
26609 - apps/netutils/cjson/Makefile: Fix the error when creating
26614 - apps/graphics/twm4nx/: Fix a recently introduced error that broke
26616 - apps/graphics/traveler/: Replace direct calls to romdisk_register()