| /kernel/linux/linux-5.10/arch/arm/boot/dts/ |
| D | kirkwood-iomega_ix2_200.dts | 1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
5 #include "kirkwood-6281.dtsi"
8 model = "Iomega StorCenter ix2-200";
9 compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
18 stdout-path = &uart0;
22 pinctrl: pin-controller@10000 {
23 pinctrl-0 = < &pmx_led_sata_brt_ctrl_1
33 pinctrl-names = "default";
35 pmx_button_reset: pmx-button-reset {
[all …]
|
| D | stm32mp157a-iot-box.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
7 #include "stm32mp157a-stinger96.dtsi"
11 compatible = "shiratech,stm32mp157a-iot-box", "st,stm32mp157";
13 wlan_pwr: regulator-wlan {
14 compatible = "regulator-fixed";
16 regulator-name = "wl-reg";
17 regulator-min-microvolt = <3300000>;
18 regulator-max-microvolt = <3300000>;
20 gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>;
[all …]
|
| /kernel/linux/linux-4.19/arch/arm/boot/dts/ |
| D | kirkwood-iomega_ix2_200.dts | 1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
5 #include "kirkwood-6281.dtsi"
8 model = "Iomega StorCenter ix2-200";
9 compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
18 stdout-path = &uart0;
22 pinctrl: pin-controller@10000 {
23 pinctrl-0 = < &pmx_led_sata_brt_ctrl_1
33 pinctrl-names = "default";
35 pmx_button_reset: pmx-button-reset {
[all …]
|
| D | armada-370-synology-ds213j.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
9 * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
12 * were delivered with an older version of u-boot that left internal
17 * installing it from u-boot prompt) or adjust the Devive Tree
21 /dts-v1/;
23 #include <dt-bindings/input/input.h>
24 #include <dt-bindings/gpio/gpio.h>
25 #include "armada-370.dtsi"
30 "marvell,armada-370-xp";
33 stdout-path = "serial0:115200n8";
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/phy/ |
| D | brcm,ns2-drd-phy.txt | 4 - compatible: brcm,ns2-drd-phy
5 - reg: offset and length of the NS2 PHY related registers.
6 - reg-names
8 icfg - for DRD ICFG configurations
9 rst-ctrl - for DRD IDM reset
10 crmu-ctrl - for CRMU core vdd, PHY and PHY PLL reset
11 usb2-strap - for port over current polarity reversal
12 - #phy-cells: Must be 0. No args required.
13 - vbus-gpios: vbus gpio binding
14 - id-gpios: id gpio binding
[all …]
|
| /kernel/linux/linux-4.19/Documentation/devicetree/bindings/phy/ |
| D | brcm,ns2-drd-phy.txt | 4 - compatible: brcm,ns2-drd-phy
5 - reg: offset and length of the NS2 PHY related registers.
6 - reg-names
8 icfg - for DRD ICFG configurations
9 rst-ctrl - for DRD IDM reset
10 crmu-ctrl - for CRMU core vdd, PHY and PHY PLL reset
11 usb2-strap - for port over current polarity reversal
12 - #phy-cells: Must be 0. No args required.
13 - vbus-gpios: vbus gpio binding
14 - id-gpios: id gpio binding
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/leds/ |
| D | leds-ktd2692.txt | 1 * Kinetic Technologies - KTD2692 Flash LED Driver
3 KTD2692 is the ideal power solution for high-power flash LEDs.
4 It uses ExpressWire single-wire programming for maximum flexibility.
6 The ExpressWire interface through CTRL pin can control LED on/off and
10 Also, When the AUX pin is pulled high while CTRL pin is high,
11 LED current will be ramped up to the flash-mode current level.
14 - compatible : Should be "kinetic,ktd2692".
15 - ctrl-gpios : Specifier of the GPIO connected to CTRL pin.
16 - aux-gpios : Specifier of the GPIO connected to AUX pin.
19 - vin-supply : "vin" LED supply (2.7V to 5.5V).
[all …]
|
| D | leds-lt3593.txt | 4 - compatible: Should be "lltc,lt3593".
5 - lltc,ctrl-gpios: A handle to the GPIO that is connected to the 'CTRL'
9 configured in a sub-node in the device node.
11 Optional sub-node properties:
12 - function: See Documentation/devicetree/bindings/leds/common.txt
13 - color: See Documentation/devicetree/bindings/leds/common.txt
14 - label: A label for the LED. If none is given, the LED will be
16 - linux,default-trigger: The default trigger for the LED.
18 - default-state: The initial state of the LED.
26 #include <dt-bindings/leds/common.h>
[all …]
|
| /kernel/linux/linux-4.19/Documentation/devicetree/bindings/leds/ |
| D | leds-ktd2692.txt | 1 * Kinetic Technologies - KTD2692 Flash LED Driver
3 KTD2692 is the ideal power solution for high-power flash LEDs.
4 It uses ExpressWire single-wire programming for maximum flexibility.
6 The ExpressWire interface through CTRL pin can control LED on/off and
10 Also, When the AUX pin is pulled high while CTRL pin is high,
11 LED current will be ramped up to the flash-mode current level.
14 - compatible : Should be "kinetic,ktd2692".
15 - ctrl-gpios : Specifier of the GPIO connected to CTRL pin.
16 - aux-gpios : Specifier of the GPIO connected to AUX pin.
19 - vin-supply : "vin" LED supply (2.7V to 5.5V).
[all …]
|
| D | leds-lt3593.txt | 4 - compatible: Should be "lltc,lt3593".
5 - lltc,ctrl-gpios: A handle to the GPIO that is connected to the 'CTRL'
9 configured in a sub-node in the device node.
11 Optional sub-node properties:
12 - label: A label for the LED. If none is given, the LED will be
14 - linux,default-trigger: The default trigger for the LED.
16 - default-state: The initial state of the LED.
24 led-controller {
26 lltc,ctrl-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
30 default-state = "on";
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/iio/amplifiers/ |
| D | adi,hmc425a.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: HMC425A 6-bit Digital Step Attenuator
10 - Michael Hennerich <michael.hennerich@analog.com>
11 - Beniamin Bia <beniamin.bia@analog.com>
15 HMC425A 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz
16 https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf
21 - adi,hmc425a
23 vcc-supply: true
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/serial/ |
| D | st,stm32-uart.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/serial/st,stm32-uart.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
8 - Erwan Le Ray <erwan.leray@st.com>
13 - $ref: rs485.yaml
18 - st,stm32-uart
19 - st,stm32f7-uart
20 - st,stm32h7-uart
37 st,hw-flow-ctrl:
[all …]
|
| /kernel/linux/linux-5.10/drivers/media/i2c/ |
| D | ov9650.c | 1 // SPDX-License-Identifier: GPL-2.0-only
25 #include <media/media-entity.h>
26 #include <media/v4l2-async.h>
27 #include <media/v4l2-ctrls.h>
28 #include <media/v4l2-device.h>
29 #include <media/v4l2-event.h>
30 #include <media/v4l2-image-sizes.h>
31 #include <media/v4l2-subdev.h>
32 #include <media/v4l2-mediabus.h>
37 MODULE_PARM_DESC(debug, "Debug level (0-2)");
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/mux/ |
| D | mux-controller.txt | 11 space is a simple zero-based enumeration. I.e. 0-1 for a 2-way multiplexer,
12 0-7 for an 8-way multiplexer, etc.
16 ---------
19 want to use with a property containing a 'mux-ctrl-list':
21 mux-ctrl-list ::= <single-mux-ctrl> [mux-ctrl-list]
22 single-mux-ctrl ::= <mux-ctrl-phandle> [mux-ctrl-specifier]
23 mux-ctrl-phandle : phandle to mux controller node
24 mux-ctrl-specifier : array of #mux-control-cells specifying the
27 Mux controller properties should be named "mux-controls". The exact meaning of
29 each consumer. An optional property "mux-control-names" may contain a list of
[all …]
|
| /kernel/linux/linux-4.19/Documentation/devicetree/bindings/mux/ |
| D | mux-controller.txt | 11 space is a simple zero-based enumeration. I.e. 0-1 for a 2-way multiplexer,
12 0-7 for an 8-way multiplexer, etc.
16 ---------
19 want to use with a property containing a 'mux-ctrl-list':
21 mux-ctrl-list ::= <single-mux-ctrl> [mux-ctrl-list]
22 single-mux-ctrl ::= <mux-ctrl-phandle> [mux-ctrl-specifier]
23 mux-ctrl-phandle : phandle to mux controller node
24 mux-ctrl-specifier : array of #mux-control-cells specifying the
27 Mux controller properties should be named "mux-controls". The exact meaning of
29 each consumer. An optional property "mux-control-names" may contain a list of
[all …]
|
| /kernel/linux/linux-4.19/drivers/media/i2c/ |
| D | ov9650.c | 27 #include <media/media-entity.h>
28 #include <media/v4l2-async.h>
29 #include <media/v4l2-ctrls.h>
30 #include <media/v4l2-device.h>
31 #include <media/v4l2-event.h>
32 #include <media/v4l2-image-sizes.h>
33 #include <media/v4l2-subdev.h>
34 #include <media/v4l2-mediabus.h>
39 MODULE_PARM_DESC(debug, "Debug level (0-2)");
47 #define REG_BLUE 0x01 /* AWB - Blue chanel gain */
[all …]
|
| /kernel/linux/linux-4.19/Documentation/devicetree/bindings/spi/ |
| D | spi_pl022.txt | 4 - compatible : "arm,pl022", "arm,primecell"
5 - reg : Offset and length of the register set for the device
6 - interrupts : Should contain SPI controller interrupt
7 - num-cs : total number of chipselects
10 - cs-gpios : should specify GPIOs used for chipselects.
11 The gpios will be referred to as reg = <index> in the SPI child nodes.
13 - pl022,autosuspend-delay : delay in ms following transfer completion before
17 - pl022,rt : indicates the controller should run the message pump with realtime
19 - dmas : Two or more DMA channel specifiers following the convention outlined
21 - dma-names: Names for the dma channels, if present. There must be at
[all …]
|
| /kernel/linux/linux-5.10/drivers/gpu/drm/msm/dp/ |
| D | dp_power.h | 1 /* SPDX-License-Identifier: GPL-2.0-only */
3 * Copyright (c) 2012-2020, The Linux Foundation. All rights reserved.
12 * sruct dp_power - DisplayPort's power related data
14 * @init: initializes the regulators/core clocks/GPIOs/pinctrl
15 * @deinit: turns off the regulators/core clocks/GPIOs/pinctrl
26 * dp_power_init() - enable power supplies for display controller
38 * dp_power_deinit() - turn off regulators and gpios.
48 * dp_power_clk_status() - display controller clocks status
51 * @pm_type: type of pm, core/ctrl/phy
60 * dp_power_clk_enable() - enable display controller clocks
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/pci/ |
| D | ti,j721e-pci-host.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2 # Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
4 ---
5 $id: "http://devicetree.org/schemas/pci/ti,j721e-pci-host.yaml#"
6 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
11 - Kishon Vijay Abraham I <kishon@ti.com>
14 - $ref: "cdns-pcie-host.yaml#"
19 - ti,j721e-pcie-host
24 reg-names:
26 - const: intd_cfg
[all …]
|
| /kernel/linux/linux-4.19/arch/arm/mach-mvebu/ |
| D | pm-board.c | 2 * Board-level suspend/resume support.
4 * Copyright (C) 2014-2015 Marvell
6 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
34 /* Put 001 as value on the GPIOs */ in mvebu_armada_pm_enter()
41 /* Prepare writing 111 to the GPIOs */ in mvebu_armada_pm_enter()
85 if (!of_machine_is_compatible("marvell,axp-gp")) in mvebu_armada_pm_init()
86 return -ENODEV; in mvebu_armada_pm_init()
90 return -ENODEV; in mvebu_armada_pm_init()
96 pic_gpios[i] = of_get_named_gpio(np, "ctrl-gpios", i); in mvebu_armada_pm_init()
98 ret = -ENODEV; in mvebu_armada_pm_init()
[all …]
|
| /kernel/linux/linux-5.10/arch/arm/mach-mvebu/ |
| D | pm-board.c | 2 * Board-level suspend/resume support.
4 * Copyright (C) 2014-2015 Marvell
6 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
34 /* Put 001 as value on the GPIOs */ in mvebu_armada_pm_enter()
41 /* Prepare writing 111 to the GPIOs */ in mvebu_armada_pm_enter()
85 if (!of_machine_is_compatible("marvell,axp-gp")) in mvebu_armada_pm_init()
86 return -ENODEV; in mvebu_armada_pm_init()
90 return -ENODEV; in mvebu_armada_pm_init()
96 pic_gpios[i] = of_get_named_gpio(np, "ctrl-gpios", i); in mvebu_armada_pm_init()
98 ret = -ENODEV; in mvebu_armada_pm_init()
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/display/tilcdc/ |
| D | panel.txt | 1 Device-Tree bindings for tilcdc DRM generic panel output driver
4 - compatible: value should be "ti,tilcdc,panel".
5 - panel-info: configuration info to configure LCDC correctly for the panel
6 - ac-bias: AC Bias Pin Frequency
7 - ac-bias-intrpt: AC Bias Pin Transitions per Interrupt
8 - dma-burst-sz: DMA burst size
9 - bpp: Bits per pixel
10 - fdd: FIFO DMA Request Delay
11 - sync-edge: Horizontal and Vertical Sync Edge: 0=rising 1=falling
12 - sync-ctrl: Horizontal and Vertical Sync: Control: 0=ignore
[all …]
|
| /kernel/linux/linux-4.19/Documentation/devicetree/bindings/display/tilcdc/ |
| D | panel.txt | 1 Device-Tree bindings for tilcdc DRM generic panel output driver
4 - compatible: value should be "ti,tilcdc,panel".
5 - panel-info: configuration info to configure LCDC correctly for the panel
6 - ac-bias: AC Bias Pin Frequency
7 - ac-bias-intrpt: AC Bias Pin Transitions per Interrupt
8 - dma-burst-sz: DMA burst size
9 - bpp: Bits per pixel
10 - fdd: FIFO DMA Request Delay
11 - sync-edge: Horizontal and Vertical Sync Edge: 0=rising 1=falling
12 - sync-ctrl: Horizontal and Vertical Sync: Control: 0=ignore
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/net/ |
| D | mediatek-bluetooth.txt | 1 MediaTek SoC built-in Bluetooth Devices
5 child node of the serial node with BTIF. The dt-bindings details for BTIF
10 - compatible: Must be
11 "mediatek,mt7622-bluetooth": for MT7622 SoC
12 - clocks: Should be the clock specifiers corresponding to the entry in
13 clock-names property.
14 - clock-names: Should contain "ref" entries.
15 - power-domains: Phandle to the power domain that the device is part of
20 compatible = "mediatek,mt7622-btif",
21 "mediatek,mtk-btif";
[all …]
|
| /kernel/linux/linux-4.19/drivers/gpu/drm/msm/hdmi/ |
| D | hdmi.c | 22 #include <sound/hdmi-codec.h>
27 uint32_t ctrl = 0; in msm_hdmi_set_mode() local
30 spin_lock_irqsave(&hdmi->reg_lock, flags); in msm_hdmi_set_mode()
32 ctrl |= HDMI_CTRL_ENABLE; in msm_hdmi_set_mode()
33 if (!hdmi->hdmi_mode) { in msm_hdmi_set_mode()
34 ctrl |= HDMI_CTRL_HDMI; in msm_hdmi_set_mode()
35 hdmi_write(hdmi, REG_HDMI_CTRL, ctrl); in msm_hdmi_set_mode()
36 ctrl &= ~HDMI_CTRL_HDMI; in msm_hdmi_set_mode()
38 ctrl |= HDMI_CTRL_HDMI; in msm_hdmi_set_mode()
41 ctrl = HDMI_CTRL_HDMI; in msm_hdmi_set_mode()
[all …]
|