| /kernel/linux/linux-4.19/Documentation/hwmon/ |
| D | pcf8591 | 20 The PCF8591 is an 8-bit A/D and D/A converter (4 analog inputs and one
24 The PCF8591 has 4 analog inputs programmable as single-ended or
25 differential inputs :
26 - mode 0 : four single ended inputs
27 Pins AIN0 to AIN3 are single ended inputs for channels 0 to 3
29 - mode 1 : three differential inputs
31 Pins AIN0 to AIN2 are positive differential inputs for channels 0 to 2
34 Pins AIN0 and AIN1 are single ended inputs for channels 0 and 1
38 - mode 3 : two differential inputs
52 0 = four single ended inputs
[all …]
|
| D | adt7475 | 35 measurement inputs and VID support. The ADT7490 also has additional
36 features, including extra voltage measurement inputs and PECI support. All
53 Each of the measured inputs (voltage, temperature, fan speed) has
57 The ADT747x samples all inputs continuously. The driver will not read
65 * 2 voltage inputs
69 * 2 voltage inputs
72 * 5 voltage inputs
76 * 6 voltage inputs
|
| D | adm1026 | 19 List of GPIO pins (0-16) to program as inputs
42 sensor inputs and one internal sensor. Each sensor has a high and low
60 measurements. Several inputs have integrated attenuators so they can measure
62 dedicated inputs. There are several inputs scaled to 0-3V full-scale range
63 for SCSI terminator power. The remaining inputs are not scaled and have
74 The ADM1026 measures continuously. Analog inputs are measured about 4
79 temperature sensor inputs. Both the PWM output and the DAC output can be
|
| /kernel/linux/linux-5.10/Documentation/hwmon/ |
| D | pcf8591.rst | 25 The PCF8591 is an 8-bit A/D and D/A converter (4 analog inputs and one
29 The PCF8591 has 4 analog inputs programmable as single-ended or
30 differential inputs:
32 - mode 0 : four single ended inputs
33 Pins AIN0 to AIN3 are single ended inputs for channels 0 to 3
35 - mode 1 : three differential inputs
37 Pins AIN0 to AIN2 are positive differential inputs for channels 0 to 2
40 Pins AIN0 and AIN1 are single ended inputs for channels 0 and 1
44 - mode 3 : two differential inputs
59 - 0 = four single ended inputs
[all …]
|
| D | adm1026.rst | 23 List of GPIO pins (0-16) to program as inputs
50 sensor inputs and one internal sensor. Each sensor has a high and low
68 measurements. Several inputs have integrated attenuators so they can measure
70 dedicated inputs. There are several inputs scaled to 0-3V full-scale range
71 for SCSI terminator power. The remaining inputs are not scaled and have
82 The ADM1026 measures continuously. Analog inputs are measured about 4
87 temperature sensor inputs. Both the PWM output and the DAC output can be
|
| D | adt7475.rst | 51 measurement inputs and VID support. The ADT7490 also has additional
52 features, including extra voltage measurement inputs and PECI support. All
69 Each of the measured inputs (voltage, temperature, fan speed) has
73 The ADT747x samples all inputs continuously. The driver will not read
81 * 2 voltage inputs
85 * 2 voltage inputs
88 * 5 voltage inputs
92 * 6 voltage inputs
|
| /kernel/linux/linux-4.19/Documentation/ioctl/ |
| D | cdrom.txt | 103 inputs: none
117 inputs: none
132 inputs:
156 inputs:
177 inputs:
195 inputs:
220 inputs: none
238 inputs: none
257 inputs: none
276 inputs: none
[all …]
|
| D | hdio.txt | 93 inputs: none
138 inputs: none
152 inputs:
173 inputs: none
189 inputs:
241 inputs: none
271 inputs: none
290 inputs:
310 inputs: none
328 inputs: none
[all …]
|
| /kernel/linux/linux-5.10/Documentation/userspace-api/ioctl/ |
| D | cdrom.rst | 105 inputs:
126 inputs:
150 inputs:
181 inputs:
210 inputs:
235 inputs:
265 inputs:
290 inputs:
316 inputs:
343 inputs:
[all …]
|
| D | hdio.rst | 97 inputs:
151 inputs:
173 inputs:
202 inputs:
224 inputs:
287 inputs:
321 inputs:
347 inputs:
375 inputs:
402 inputs:
[all …]
|
| /kernel/linux/linux-4.19/Documentation/media/uapi/v4l/ |
| D | audio.rst | 6 Audio Inputs and Outputs
9 Audio inputs and outputs are physical connectors of a device. Video
10 capture devices have inputs, output devices have outputs, zero or more
11 each. Radio devices have no audio inputs or outputs. They have exactly
13 tuners with video inputs or outputs only, and radio devices have none of
17 Audio and video inputs and outputs are associated. Selecting a video
20 more than one video input or output. Assumed two composite video inputs
21 and two audio inputs exist, there may be up to four valid combinations.
28 To learn about the number and attributes of the available inputs and
53 multiple selectable audio inputs, all audio output ioctls when the
[all …]
|
| D | video.rst | 6 Video Inputs and Outputs
9 Video inputs and outputs are physical connectors of a device. These can
12 be a video input. Video and VBI capture devices have inputs. Video and
14 no video inputs or outputs.
16 To learn about the number and attributes of the available inputs and
29 implement all the input ioctls when the device has one or more inputs,
|
| /kernel/linux/linux-5.10/Documentation/userspace-api/media/v4l/ |
| D | audio.rst | 6 Audio Inputs and Outputs
9 Audio inputs and outputs are physical connectors of a device. Video
10 capture devices have inputs, output devices have outputs, zero or more
11 each. Radio devices have no audio inputs or outputs. They have exactly
13 tuners with video inputs or outputs only, and radio devices have none of
17 Audio and video inputs and outputs are associated. Selecting a video
20 more than one video input or output. Assumed two composite video inputs
21 and two audio inputs exist, there may be up to four valid combinations.
28 To learn about the number and attributes of the available inputs and
53 multiple selectable audio inputs, all audio output ioctls when the
[all …]
|
| D | video.rst | 6 Video Inputs and Outputs
9 Video inputs and outputs are physical connectors of a device. These can
12 be a video input. Video and VBI capture devices have inputs. Video and
14 no video inputs or outputs.
16 To learn about the number and attributes of the available inputs and
29 implement all the input ioctls when the device has one or more inputs,
|
| /kernel/linux/linux-5.10/include/media/drv-intf/ |
| D | msp3400.h | 3 msp3400.h - definition for msp3400 inputs and outputs
19 Inputs
22 There are 1) tuner inputs, 2) I2S inputs, 3) SCART inputs. You will have
24 selected tuner input, the selected SCART input and all I2S inputs go to
38 SCART2 output from the DSP, or the msp3400 SCART inputs, thus completely
56 ignore or mute certain inputs or outputs.
58 Also, depending on the msp version only a subset of the inputs or
63 /* Inputs to the DSP unit: two independent selections have to be made:
93 There are up to 16 DSP inputs to choose from, so each output is
96 Note: the 44x8G can mix two inputs and feed the result back to the
[all …]
|
| /kernel/linux/linux-4.19/include/media/drv-intf/ |
| D | msp3400.h | 2 msp3400.h - definition for msp3400 inputs and outputs
31 Inputs
34 There are 1) tuner inputs, 2) I2S inputs, 3) SCART inputs. You will have
36 selected tuner input, the selected SCART input and all I2S inputs go to
50 SCART2 output from the DSP, or the msp3400 SCART inputs, thus completely
68 ignore or mute certain inputs or outputs.
70 Also, depending on the msp version only a subset of the inputs or
75 /* Inputs to the DSP unit: two independent selections have to be made:
105 There are up to 16 DSP inputs to choose from, so each output is
108 Note: the 44x8G can mix two inputs and feed the result back to the
[all …]
|
| /kernel/linux/linux-4.19/drivers/staging/comedi/drivers/ |
| D | pcl730.c | 45 * BASE+0 Isolated outputs 0-7 (write) / inputs 0-7 (read)
46 * BASE+1 Isolated outputs 8-15 (write) / inputs 8-15 (read)
47 * BASE+2 TTL outputs 0-7 (write) / inputs 0-7 (read)
48 * BASE+3 TTL outputs 8-15 (write) / inputs 8-15 (read)
55 * BASE+1 Isolated inputs 0-7 (read)
61 * BASE+2 Isolated inputs 0-7 (read)
62 * BASE+3 Isolated inputs 8-15 (read)
66 * BASE+0 Isolated outputs 0-7 (write) or inputs 0-7 (read)
67 * BASE+1 Isolated outputs 8-15 (write) or inputs 8-15 (read)
68 * BASE+2 Isolated outputs 16-23 (write) or inputs 16-23 (read)
[all …]
|
| /kernel/linux/linux-5.10/drivers/staging/comedi/drivers/ |
| D | pcl730.c | 45 * BASE+0 Isolated outputs 0-7 (write) / inputs 0-7 (read)
46 * BASE+1 Isolated outputs 8-15 (write) / inputs 8-15 (read)
47 * BASE+2 TTL outputs 0-7 (write) / inputs 0-7 (read)
48 * BASE+3 TTL outputs 8-15 (write) / inputs 8-15 (read)
55 * BASE+1 Isolated inputs 0-7 (read)
61 * BASE+2 Isolated inputs 0-7 (read)
62 * BASE+3 Isolated inputs 8-15 (read)
66 * BASE+0 Isolated outputs 0-7 (write) or inputs 0-7 (read)
67 * BASE+1 Isolated outputs 8-15 (write) or inputs 8-15 (read)
68 * BASE+2 Isolated outputs 16-23 (write) or inputs 16-23 (read)
[all …]
|
| /kernel/linux/linux-5.10/drivers/media/pci/saa7134/ |
| D | saa7134-cards.c | 64 .inputs = {{
79 .inputs = {{
107 .inputs = {{
154 .inputs = {{
195 .inputs = {{
224 .inputs = {{
272 .inputs = { {
319 .inputs = {{
348 .inputs = {{
373 .inputs = {{
[all …]
|
| /kernel/linux/linux-4.19/drivers/media/pci/saa7134/ |
| D | saa7134-cards.c | 73 .inputs = {{
88 .inputs = {{
116 .inputs = {{
163 .inputs = {{
204 .inputs = {{
233 .inputs = {{
281 .inputs = { {
328 .inputs = {{
357 .inputs = {{
382 .inputs = {{
[all …]
|
| /kernel/linux/linux-4.19/Documentation/usb/ |
| D | chipidea.txt | 30 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
36 echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
41 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
53 echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop
54 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
58 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
62 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop
68 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
|
| /kernel/linux/linux-5.10/include/media/i2c/ |
| D | cs53l32a.h | 3 cs53l32a.h - definition for cs53l32a inputs and outputs
12 /* There are 2 physical inputs, but the second input can be
15 possible inputs to choose from. */
17 /* CS53L32A HW inputs */
|
| /kernel/linux/linux-5.10/arch/mips/math-emu/ |
| D | sp_fmin.c | 52 * The case of both inputs quiet NaNs in ieee754sp_fmin()
116 /* Signs of inputs are the same, let's compare exponents */ in ieee754sp_fmin()
118 /* Inputs are both positive */ in ieee754sp_fmin()
124 /* Inputs are both negative */ in ieee754sp_fmin()
131 /* Signs and exponents of inputs are equal, let's compare mantissas */ in ieee754sp_fmin()
133 /* Inputs are both positive, with equal signs and exponents */ in ieee754sp_fmin()
138 /* Inputs are both negative, with equal signs and exponents */ in ieee754sp_fmin()
178 * The case of both inputs quiet NaNs in ieee754sp_fmina()
|
| D | dp_fmin.c | 52 * The case of both inputs quiet NaNs in ieee754dp_fmin()
116 /* Signs of inputs are the same, let's compare exponents */ in ieee754dp_fmin()
118 /* Inputs are both positive */ in ieee754dp_fmin()
124 /* Inputs are both negative */ in ieee754dp_fmin()
131 /* Signs and exponents of inputs are equal, let's compare mantissas */ in ieee754dp_fmin()
133 /* Inputs are both positive, with equal signs and exponents */ in ieee754dp_fmin()
138 /* Inputs are both negative, with equal signs and exponents */ in ieee754dp_fmin()
178 * The case of both inputs quiet NaNs in ieee754dp_fmina()
|
| D | dp_fmax.c | 52 * The case of both inputs quiet NaNs in ieee754dp_fmax()
116 /* Signs of inputs are equal, let's compare exponents */ in ieee754dp_fmax()
118 /* Inputs are both positive */ in ieee754dp_fmax()
124 /* Inputs are both negative */ in ieee754dp_fmax()
131 /* Signs and exponents of inputs are equal, let's compare mantissas */ in ieee754dp_fmax()
133 /* Inputs are both positive, with equal signs and exponents */ in ieee754dp_fmax()
138 /* Inputs are both negative, with equal signs and exponents */ in ieee754dp_fmax()
178 * The case of both inputs quiet NaNs in ieee754dp_fmaxa()
|