| /kernel/linux/linux-4.19/Documentation/devicetree/bindings/mtd/ |
| D | gpmi-nand.txt | 1 * Freescale General-Purpose Media Interface (GPMI)
3 The GPMI nand controller provides an interface to control the
4 NAND flash chips.
7 - compatible : should be "fsl,<chip>-gpmi-nand", chip can be:
13 - reg : should contain registers location and length for gpmi and bch.
14 - reg-names: Should contain the reg names "gpmi-nand" and "bch"
15 - interrupts : BCH interrupt number.
16 - interrupt-names : Should be "bch".
17 - dmas: DMA specifier, consisting of a phandle to DMA controller node
19 Refer to dma.txt and fsl-mxs-dma.txt for details.
[all …]
|
| D | brcm,brcmnand.txt | 1 * Broadcom STB NAND Controller
3 The Broadcom Set-Top Box NAND controller supports low-level access to raw NAND
4 flash chips. It has a memory-mapped register interface for both control
5 registers and for its data input/output buffer. On some SoCs, this controller is
6 paired with a custom DMA engine (inventively named "Flash DMA") which supports
10 available on a variety of Broadcom SoCs, including some BCM3xxx, BCM63xx, and
15 - compatible : May contain an SoC-specific compatibility string (see below)
16 to account for any SoC-specific hardware bits that may be
17 added on top of the base core controller.
19 the core NAND controller, of the following form:
[all …]
|
| D | davinci-nand.txt | 1 Device tree bindings for Texas instruments Davinci/Keystone NAND controller
4 NAND interface contains.
7 Davinci DM646x - http://www.ti.com/lit/ug/sprueq7c/sprueq7c.pdf
8 Kestone - http://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf
12 - compatible: "ti,davinci-nand"
13 "ti,keystone-nand"
15 - reg: Contains 2 offset/length values:
16 - offset and length for the access window.
17 - offset and length for accessing the AEMIF
20 - ti,davinci-chipselect: number of chipselect. Indicates on the
[all …]
|
| D | ingenic,jz4780-nand.txt | 1 * Ingenic JZ4780 NAND/BCH
3 This file documents the device tree bindings for NAND flash devices on the
4 JZ4780. NAND devices are connected to the NEMC controller (described in
5 memory-controllers/ingenic,jz4780-nemc.txt), and thus NAND device nodes must
8 Required NAND controller device properties:
9 - compatible: Should be set to "ingenic,jz4780-nand".
10 - reg: For each bank with a NAND chip attached, should specify a bank number,
13 Optional NAND controller device properties:
14 - ingenic,bch-controller: To make use of the hardware BCH controller, this
20 - Individual NAND chips are children of the NAND controller node.
[all …]
|
| D | samsung-s3c2410.txt | 1 * Samsung S3C2410 and compatible NAND flash controller
4 - compatible : The possible values are:
5 "samsung,s3c2410-nand"
6 "samsung,s3c2412-nand"
7 "samsung,s3c2440-nand"
8 - reg : register's location and length.
9 - #address-cells, #size-cells : see nand.txt
10 - clocks : phandle to the nand controller clock
11 - clock-names : must contain "nand"
14 Child nodes representing the available nand chips.
[all …]
|
| D | vf610-nfc.txt | 1 Freescale's NAND flash controller (NFC)
3 This variant of the Freescale NAND flash controller (NFC) can be found on
7 - compatible: Should be set to "fsl,vf610-nfc".
8 - reg: address range of the NFC.
9 - interrupts: interrupt of the NFC.
10 - #address-cells: shall be set to 1. Encode the nand CS.
11 - #size-cells : shall be set to 0.
12 - assigned-clocks: main clock from the SoC, for Vybrid <&clks VF610_CLK_NFC>;
13 - assigned-clock-rates: The NAND bus timing is derived from this clock
14 rate and should not exceed maximum timing for any NAND memory chip
[all …]
|
| D | atmel-nand.txt | 1 Atmel NAND flash controller bindings
3 The NAND flash controller node should be defined under the EBI bus (see
4 Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt).
5 One or several NAND devices can be defined under this NAND controller.
6 The NAND controller might be connected to an ECC engine.
8 * NAND controller bindings:
11 - compatible: should be one of the following
12 "atmel,at91rm9200-nand-controller"
13 "atmel,at91sam9260-nand-controller"
14 "atmel,at91sam9261-nand-controller"
[all …]
|
| D | nvidia-tegra20-nand.txt | 1 NVIDIA Tegra NAND Flash controller
4 - compatible: Must be one of:
5 - "nvidia,tegra20-nand"
6 - reg: MMIO address range
7 - interrupts: interrupt output of the NFC controller
8 - clocks: Must contain an entry for each entry in clock-names.
9 See ../clocks/clock-bindings.txt for details.
10 - clock-names: Must include the following entries:
11 - nand
12 - resets: Must contain an entry for each entry in reset-names.
[all …]
|
| D | lpc32xx-slc.txt | 1 NXP LPC32xx SoC NAND SLC controller
4 - compatible: "nxp,lpc3220-slc"
5 - reg: Address and size of the controller
6 - nand-on-flash-bbt: Use bad block table on flash
7 - gpios: GPIO specification for NAND write protect
11 - nxp,wdr-clks: Delay before Ready signal is tested on write (W_RDY)
12 - nxp,rdr-clks: Delay before Ready signal is tested on read (R_RDY)
15 - nxp,wwidth: Write pulse width (W_WIDTH)
16 - nxp,whold: Write hold time (W_HOLD)
17 - nxp,wsetup: Write setup time (W_SETUP)
[all …]
|
| D | mtk-nand.txt | 1 MTK SoCs NAND FLASH controller (NFC) DT binding
3 This file documents the device tree bindings for MTK SoCs NAND controllers.
5 the nand controller interface driver and the ECC engine driver.
10 1) NFC NAND Controller Interface (NFI):
13 The first part of NFC is NAND Controller Interface (NFI) HW.
15 - compatible: Should be one of
16 "mediatek,mt2701-nfc",
17 "mediatek,mt2712-nfc",
18 "mediatek,mt7622-nfc".
19 - reg: Base physical address and size of NFI.
[all …]
|
| /kernel/linux/linux-4.19/drivers/mtd/nand/raw/ |
| D | Kconfig | 5 bool "NAND ECC Smart Media byte order"
6 depends on MTD_NAND_ECC
14 tristate "Raw/Parallel NAND Device Support"
15 depends on MTD
19 NAND flash devices. For further information see
20 <http://www.linux-mtd.infradead.org/doc/nand.html>.
27 depends on MTD_NAND_ECC_BCH
36 ECC codes. They are used with NAND devices requiring more than 1 bit
47 tristate "Support Denali NAND controller on Intel Moorestown"
49 depends on PCI
[all …]
|
| /kernel/linux/linux-5.10/drivers/mtd/nand/raw/ |
| D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
6 bool "NAND ECC Smart Media byte order"
7 depends on MTD_NAND_ECC_SW_HAMMING
14 tristate "Raw/Parallel NAND Device Support"
20 NAND flash devices. For further information see
21 <http://www.linux-mtd.infradead.org/doc/nand.html>.
32 ECC codes. They are used with NAND devices requiring more than 1 bit
35 comment "Raw/parallel NAND flash controllers"
41 tristate "Denali NAND controller on Intel Moorestown"
43 depends on PCI
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/mtd/ |
| D | brcm,brcmnand.txt | 1 * Broadcom STB NAND Controller
3 The Broadcom Set-Top Box NAND controller supports low-level access to raw NAND
4 flash chips. It has a memory-mapped register interface for both control
5 registers and for its data input/output buffer. On some SoCs, this controller is
6 paired with a custom DMA engine (inventively named "Flash DMA") which supports
10 available on a variety of Broadcom SoCs, including some BCM3xxx, BCM63xx, and
15 - compatible : May contain an SoC-specific compatibility string (see below)
16 to account for any SoC-specific hardware bits that may be
17 added on top of the base core controller.
19 the core NAND controller, of the following form:
[all …]
|
| D | davinci-nand.txt | 1 Device tree bindings for Texas instruments Davinci/Keystone NAND controller
4 NAND interface contains.
7 Davinci DM646x - https://www.ti.com/lit/ug/sprueq7c/sprueq7c.pdf
8 Kestone - https://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf
12 - compatible: "ti,davinci-nand"
13 "ti,keystone-nand"
15 - reg: Contains 2 offset/length values:
16 - offset and length for the access window.
17 - offset and length for accessing the AEMIF
20 - ti,davinci-chipselect: number of chipselect. Indicates on the
[all …]
|
| D | samsung-s3c2410.txt | 1 * Samsung S3C2410 and compatible NAND flash controller
4 - compatible : The possible values are:
5 "samsung,s3c2410-nand"
6 "samsung,s3c2412-nand"
7 "samsung,s3c2440-nand"
8 - reg : register's location and length.
9 - #address-cells, #size-cells : see nand-controller.yaml
10 - clocks : phandle to the nand controller clock
11 - clock-names : must contain "nand"
14 Child nodes representing the available nand chips.
[all …]
|
| D | vf610-nfc.txt | 1 Freescale's NAND flash controller (NFC)
3 This variant of the Freescale NAND flash controller (NFC) can be found on
7 - compatible: Should be set to "fsl,vf610-nfc".
8 - reg: address range of the NFC.
9 - interrupts: interrupt of the NFC.
10 - #address-cells: shall be set to 1. Encode the nand CS.
11 - #size-cells : shall be set to 0.
12 - assigned-clocks: main clock from the SoC, for Vybrid <&clks VF610_CLK_NFC>;
13 - assigned-clock-rates: The NAND bus timing is derived from this clock
14 rate and should not exceed maximum timing for any NAND memory chip
[all …]
|
| D | atmel-nand.txt | 1 Atmel NAND flash controller bindings
3 The NAND flash controller node should be defined under the EBI bus (see
4 Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt).
5 One or several NAND devices can be defined under this NAND controller.
6 The NAND controller might be connected to an ECC engine.
8 * NAND controller bindings:
11 - compatible: should be one of the following
12 "atmel,at91rm9200-nand-controller"
13 "atmel,at91sam9260-nand-controller"
14 "atmel,at91sam9261-nand-controller"
[all …]
|
| D | gpmi-nand.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Freescale General-Purpose Media Interface (GPMI) binding
10 - Han Xu <han.xu@nxp.com>
13 - $ref: "nand-controller.yaml"
16 The GPMI nand controller provides an interface to control the NAND
17 flash chips. The device tree may optionally contain sub-nodes
24 - enum:
[all …]
|
| D | nvidia-tegra20-nand.txt | 1 NVIDIA Tegra NAND Flash controller
4 - compatible: Must be one of:
5 - "nvidia,tegra20-nand"
6 - reg: MMIO address range
7 - interrupts: interrupt output of the NFC controller
8 - clocks: Must contain an entry for each entry in clock-names.
9 See ../clocks/clock-bindings.txt for details.
10 - clock-names: Must include the following entries:
11 - nand
12 - resets: Must contain an entry for each entry in reset-names.
[all …]
|
| D | lpc32xx-slc.txt | 1 NXP LPC32xx SoC NAND SLC controller
4 - compatible: "nxp,lpc3220-slc"
5 - reg: Address and size of the controller
6 - nand-on-flash-bbt: Use bad block table on flash
7 - gpios: GPIO specification for NAND write protect
11 - nxp,wdr-clks: Delay before Ready signal is tested on write (W_RDY)
12 - nxp,rdr-clks: Delay before Ready signal is tested on read (R_RDY)
15 - nxp,wwidth: Write pulse width (W_WIDTH)
16 - nxp,whold: Write hold time (W_HOLD)
17 - nxp,wsetup: Write setup time (W_SETUP)
[all …]
|
| D | mtk-nand.txt | 1 MTK SoCs NAND FLASH controller (NFC) DT binding
3 This file documents the device tree bindings for MTK SoCs NAND controllers.
5 the nand controller interface driver and the ECC engine driver.
10 1) NFC NAND Controller Interface (NFI):
13 The first part of NFC is NAND Controller Interface (NFI) HW.
15 - compatible: Should be one of
16 "mediatek,mt2701-nfc",
17 "mediatek,mt2712-nfc",
18 "mediatek,mt7622-nfc".
19 - reg: Base physical address and size of NFI.
[all …]
|
| /kernel/linux/linux-5.10/include/linux/mtd/ |
| D | bbm.h | 1 /* SPDX-License-Identifier: GPL-2.0-or-later */
3 * NAND family Bad Block Management (BBM) header file
4 * - Bad Block Table (BBT) implementation
9 * Copyright © 2000-2005
15 /* The maximum number of NAND chips in an array */
19 * struct nand_bbt_descr - bad block table descriptor
21 * @pages: the page(s) where we find the bbt, used with option BBT_ABSPAGE
22 * when bbt is searched, then we store the found bbts pages here.
25 * @veroffs: offset of the bbt version counter in the oob are of the page
26 * @version: version read from the bbt page during scan
[all …]
|
| /kernel/linux/linux-4.19/drivers/mtd/nand/ |
| D | bbt.c | 1 // SPDX-License-Identifier: GPL-2.0
6 * Boris Brezillon <boris.brezillon@free-electrons.com>
10 #define pr_fmt(fmt) "nand-bbt: " fmt
12 #include <linux/mtd/nand.h>
16 * nanddev_bbt_init() - Initialize the BBT (Bad Block Table)
17 * @nand: NAND device
19 * Initialize the in-memory BBT.
23 int nanddev_bbt_init(struct nand_device *nand) in nanddev_bbt_init() argument
26 unsigned int nblocks = nanddev_neraseblocks(nand); in nanddev_bbt_init()
30 nand->bbt.cache = kcalloc(nwords, sizeof(*nand->bbt.cache), in nanddev_bbt_init()
[all …]
|
| /kernel/linux/linux-5.10/drivers/mtd/nand/ |
| D | bbt.c | 1 // SPDX-License-Identifier: GPL-2.0
6 * Boris Brezillon <boris.brezillon@free-electrons.com>
10 #define pr_fmt(fmt) "nand-bbt: " fmt
12 #include <linux/mtd/nand.h>
16 * nanddev_bbt_init() - Initialize the BBT (Bad Block Table)
17 * @nand: NAND device
19 * Initialize the in-memory BBT.
23 int nanddev_bbt_init(struct nand_device *nand) in nanddev_bbt_init() argument
26 unsigned int nblocks = nanddev_neraseblocks(nand); in nanddev_bbt_init()
30 nand->bbt.cache = kcalloc(nwords, sizeof(*nand->bbt.cache), in nanddev_bbt_init()
[all …]
|
| /kernel/linux/linux-4.19/include/linux/mtd/ |
| D | bbm.h | 2 * NAND family Bad Block Management (BBM) header file
3 * - Bad Block Table (BBT) implementation
8 * Copyright © 2000-2005
23 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
29 /* The maximum number of NAND chips in an array */
33 * struct nand_bbt_descr - bad block table descriptor
35 * @pages: the page(s) where we find the bbt, used with option BBT_ABSPAGE
36 * when bbt is searched, then we store the found bbts pages here.
39 * @veroffs: offset of the bbt version counter in the oob are of the page
40 * @version: version read from the bbt page during scan
[all …]
|