voltage (full) in projects: kernel - OpenGrok search results

Project(s)

Full Search
Definition
Symbol
File Path
History
Type

Searched full:voltage (Results 1 – 25 of 3296) sorted by relevance

12 3 4 5 6 7 8 9 10 >>...132

/kernel/linux/linux-4.19/Documentation/hwmon/
D	smm665	`40 Reference voltage on VREF_ADC pin in mV. It should not be necessary to set 41 this parameter unless a non-default reference voltage is used. 87 in1_input 12V input voltage (mV) 88 in2_input 3.3V (VDD) input voltage (mV) 89 in3_input Channel A voltage (mV) 90 in4_input Channel B voltage (mV) 91 in5_input Channel C voltage (mV) 92 in6_input Channel D voltage (mV) 93 in7_input Channel E voltage (mV) 94 in8_input Channel F voltage (mV) [all …]`
D	ina209	19 The TI / Burr-Brown INA209 monitors voltage, current, and power on the high side 35 in0_input shunt voltage (mV) 36 in0_input_highest shunt voltage historical maximum reading (mV) 37 in0_input_lowest shunt voltage historical minimum reading (mV) 38 in0_reset_history reset shunt voltage history 39 in0_max shunt voltage max alarm limit (mV) 40 in0_min shunt voltage min alarm limit (mV) 41 in0_crit_max shunt voltage crit max alarm limit (mV) 42 in0_crit_min shunt voltage crit min alarm limit (mV) 43 in0_max_alarm shunt voltage max alarm limit exceeded [all …]
D	max20751	`44 in1_input Measured voltage. 45 in1_min Minimum input voltage. 46 in1_max Maximum input voltage. 47 in1_lcrit Critical minimum input voltage. 48 in1_crit Critical maximum input voltage. 49 in1_min_alarm Input voltage low alarm. 50 in1_lcrit_alarm Input voltage critical low alarm. 51 in1_min_alarm Input voltage low alarm. 52 in1_max_alarm Input voltage high alarm. 55 in2_input Measured voltage. [all …]`
D	smsc47m192	24 These chips support 3 temperature channels and 8 voltage inputs 25 as well as CPU voltage VID input. 33 Voltages are scaled such that the nominal voltage corresponds to 35 each voltage channel is 0V ... 255/192*(nominal voltage), the resolution 36 is 1 bit per (nominal voltage)/192. 37 Both voltage and temperature values are scaled by 1000, the sys files 40 The +12V analog voltage input channel (in4_input) is multiplexed with 41 bit 4 of the encoded CPU voltage. This means that you either get 42 a +12V voltage measurement or a 5 bit CPU VID, but not both. 48 The temperature and voltage readings are updated once every 1.5 seconds. [all …]
D	ir35221	`50 in1_input Measured input voltage 51 in1_crit Critical maximum input voltage 52 in1_crit_alarm Input voltage critical high alarm 53 in1_highest Highest input voltage 54 in1_lowest Lowest input voltage 55 in1_min Minimum input voltage 56 in1_min_alarm Input voltage low alarm 59 in[2-3]_input Measured output voltage 60 in[2-3]_lcrit Critical minimum output voltage 61 in[2-3]_lcrit_alarm Output voltage critical low alarm [all …]`
D	zl6100	`114 in1_input Measured input voltage. 115 in1_min Minimum input voltage. 116 in1_max Maximum input voltage. 117 in1_lcrit Critical minimum input voltage. 118 in1_crit Critical maximum input voltage. 119 in1_min_alarm Input voltage low alarm. 120 in1_max_alarm Input voltage high alarm. 121 in1_lcrit_alarm Input voltage critical low alarm. 122 in1_crit_alarm Input voltage critical high alarm. 125 in2_input Measured voltage on VMON (ZL2004) or VDRV (ZL9101M, [all …]`
/kernel/linux/linux-5.10/Documentation/hwmon/
D	smm665.rst	`67 Reference voltage on VREF_ADC pin in mV. It should not be necessary to set 68 this parameter unless a non-default reference voltage is used. 116 in1_input 12V input voltage (mV) 117 in2_input 3.3V (VDD) input voltage (mV) 118 in3_input Channel A voltage (mV) 119 in4_input Channel B voltage (mV) 120 in5_input Channel C voltage (mV) 121 in6_input Channel D voltage (mV) 122 in7_input Channel E voltage (mV) 123 in8_input Channel F voltage (mV) [all …]`
D	ina209.rst	24 The TI / Burr-Brown INA209 monitors voltage, current, and power on the high side 40 in0_input shunt voltage (mV) 41 in0_input_highest shunt voltage historical maximum reading (mV) 42 in0_input_lowest shunt voltage historical minimum reading (mV) 43 in0_reset_history reset shunt voltage history 44 in0_max shunt voltage max alarm limit (mV) 45 in0_min shunt voltage min alarm limit (mV) 46 in0_crit_max shunt voltage crit max alarm limit (mV) 47 in0_crit_min shunt voltage crit min alarm limit (mV) 48 in0_max_alarm shunt voltage max alarm limit exceeded [all …]
D	max20751.rst	`50 in1_input Measured voltage. 51 in1_min Minimum input voltage. 52 in1_max Maximum input voltage. 53 in1_lcrit Critical minimum input voltage. 54 in1_crit Critical maximum input voltage. 55 in1_min_alarm Input voltage low alarm. 56 in1_lcrit_alarm Input voltage critical low alarm. 57 in1_min_alarm Input voltage low alarm. 58 in1_max_alarm Input voltage high alarm. 61 in2_input Measured voltage. [all …]`
D	smsc47m192.rst	35 These chips support 3 temperature channels and 8 voltage inputs 36 as well as CPU voltage VID input. 44 Voltages are scaled such that the nominal voltage corresponds to 46 each voltage channel is 0V ... 255/192*(nominal voltage), the resolution 47 is 1 bit per (nominal voltage)/192. 48 Both voltage and temperature values are scaled by 1000, the sys files 51 The +12V analog voltage input channel (in4_input) is multiplexed with 52 bit 4 of the encoded CPU voltage. This means that you either get 53 a +12V voltage measurement or a 5 bit CPU VID, but not both. 59 The temperature and voltage readings are updated once every 1.5 seconds. [all …]
D	isl68137.rst	407 digital multiphase voltage regulators (raa_dmpvr2). The ISL68137 is a digital 411 and 'hv' for high voltage single-rail devices. Consult the individual datasheets 425 For 2nd generation Renesas digital multiphase voltage regulators, only the 445 in1_input Measured input voltage 446 in1_lcrit Critical minimum input voltage 447 in1_lcrit_alarm Input voltage critical low alarm 448 in1_crit Critical maximum input voltage 449 in1_crit_alarm Input voltage critical high alarm 452 in[2-3]_input Measured output voltage 453 in[2-3]_lcrit Critical minimum output voltage [all …]
D	ir38064.rst	`21 IR38064 is a Single-input Voltage, Synchronous Buck Regulator, DC-DC Converter. 41 in1_input Measured input voltage 42 in1_crit Critical maximum input voltage 43 in1_crit_alarm Input voltage critical high alarm 44 in1_min Minimum input voltage 45 in1_min_alarm Input voltage low alarm 48 in2_input Measured output voltage 49 in2_lcrit Critical minimum output voltage 50 in2_lcrit_alarm Output voltage critical low alarm 51 in2_crit Critical maximum output voltage [all …]`
D	ir35221.rst	`54 in1_input Measured input voltage 55 in1_crit Critical maximum input voltage 56 in1_crit_alarm Input voltage critical high alarm 57 in1_highest Highest input voltage 58 in1_lowest Lowest input voltage 59 in1_min Minimum input voltage 60 in1_min_alarm Input voltage low alarm 63 in[2-3]_input Measured output voltage 64 in[2-3]_lcrit Critical minimum output voltage 65 in[2-3]_lcrit_alarm Output voltage critical low alarm [all …]`
/kernel/linux/linux-4.19/drivers/regulator/
D	Kconfig	2 bool "Voltage and Current Regulator Support" 4 Generic Voltage and Current Regulator support. 6 This framework is designed to provide a generic interface to voltage 8 provide voltage and current control to client or consumer drivers and 14 to both voltage regulators (where voltage output is controllable) and 32 tristate "Fixed voltage regulator support" 34 This driver provides support for fixed voltage regulators, 41 This driver provides a virtual consumer for the voltage and 58 tristate "Marvell 88PG86X voltage regulators" 62 This driver supports Marvell 88PG867 and 88PG868 voltage regulators. [all …]
/kernel/linux/linux-5.10/drivers/regulator/
D	Kconfig	3 bool "Voltage and Current Regulator Support" 6 Generic Voltage and Current Regulator support. 8 This framework is designed to provide a generic interface to voltage 10 provide voltage and current control to client or consumer drivers and 16 to both voltage regulators (where voltage output is controllable) and 34 tristate "Fixed voltage regulator support" 36 This driver provides support for fixed voltage regulators, 43 This driver provides a virtual consumer for the voltage and 60 tristate "Marvell 88PG86X voltage regulators" 64 This driver supports Marvell 88PG867 and 88PG868 voltage regulators. [all …]
/kernel/linux/linux-4.19/arch/arm/mach-omap2/
D	voltage.c	2 * OMAP3/OMAP4 Voltage Management Routines 39 #include "voltage.h" 49 * voltdm_get_voltage() - Gets the current non-auto-compensated voltage 50 * @voltdm: pointer to the voltdm for which current voltage info is needed 52 * API to get the current non-auto-compensated voltage for a voltage domain. 53 * Returns 0 in case of error else returns the current voltage. 66 * voltdm_scale() - API to scale voltage of a particular voltage domain. 67 * @voltdm: pointer to the voltage domain which is to be scaled. 68 * @target_volt: The target voltage of the voltage domain 70 * This API should be called by the kernel to do the voltage scaling [all …]
/kernel/linux/linux-5.10/arch/arm/mach-omap2/
D	voltage.c	3 * OMAP3/OMAP4 Voltage Management Routines 36 #include "voltage.h" 46 * voltdm_get_voltage() - Gets the current non-auto-compensated voltage 47 * @voltdm: pointer to the voltdm for which current voltage info is needed 49 * API to get the current non-auto-compensated voltage for a voltage domain. 50 * Returns 0 in case of error else returns the current voltage. 63 * voltdm_scale() - API to scale voltage of a particular voltage domain. 64 * @voltdm: pointer to the voltage domain which is to be scaled. 65 * @target_volt: The target voltage of the voltage domain 67 * This API should be called by the kernel to do the voltage scaling [all …]
/kernel/linux/linux-4.19/drivers/iio/adc/
D	qcom-vadc-common.c	12 /* Voltage to temperature / 115 s64 voltage = 0, result = 0; in qcom_vadc_scale_volt() local 117 qcom_vadc_scale_calib(calib_graph, adc_code, absolute, &voltage); in qcom_vadc_scale_volt() 119 voltage = voltage prescale->den; in qcom_vadc_scale_volt() 120 result = div64_s64(voltage, prescale->num); in qcom_vadc_scale_volt() 131 s64 voltage = 0, result = 0; in qcom_vadc_scale_therm() local 134 qcom_vadc_scale_calib(calib_graph, adc_code, absolute, &voltage); in qcom_vadc_scale_therm() 137 voltage = div64_s64(voltage, 1000); in qcom_vadc_scale_therm() 141 voltage, &result); in qcom_vadc_scale_therm() 156 s64 voltage = 0; in qcom_vadc_scale_die_temp() local [all …]
/kernel/linux/linux-4.19/Documentation/devicetree/bindings/regulator/
D	vctrl.txt	1 Bindings for Voltage controlled regulators 7 - regulator-min-microvolt : smallest voltage consumers may set 8 - regulator-max-microvolt : largest voltage consumers may set 9 - ctrl-supply : The regulator supplying the control voltage. 10 - ctrl-voltage-range : an array of two integer values describing the range 11 (min/max) of the control voltage. The values specify 12 the control voltage needed to generate the corresponding 13 regulator-min/max-microvolt output voltage. 20 actual output voltage deviates beyond a certain 22 voltage. On larger voltage decreases this can occur [all …]
D	pwm-regulator.txt	6 Voltage Table: When in this mode, a voltage table (See below) of 7 predefined voltage <=> duty-cycle values must be 11 allow finer grained voltage selection are ignored and 13 the user if the assumptions made in continuous-voltage 16 Continuous Voltage: This mode uses the regulator's maximum and minimum 21 voltage-table mode above. This solution does make an 23 regulator voltage to run at half way between the 32 Only required for Voltage Table Mode: 33 - voltage-table: Voltage and Duty-Cycle table consisting of 2 cells 34 First cell is voltage in microvolts (uV) [all …]
D	max8997-regulator.txt	1 * Maxim MAX8997 Voltage and Current Regulator 3 The Maxim MAX8997 is a multi-function device which includes voltage and 13 - max8997,pmic-buck1-dvs-voltage: A set of 8 voltage values in micro-volt (uV) 14 units for buck1 when changing voltage using gpio dvs. Refer to [1] below 17 - max8997,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV) 18 units for buck2 when changing voltage using gpio dvs. Refer to [1] below 21 - max8997,pmic-buck5-dvs-voltage: A set of 8 voltage values in micro-volt (uV) 22 units for buck5 when changing voltage using gpio dvs. Refer to [1] below 26 property is specified, the 'max8997,pmic-buck[1/2/5]-dvs-voltage' 27 property should specify atleast one voltage level (which would be a [all …]
/kernel/linux/linux-5.10/Documentation/devicetree/bindings/regulator/
D	vctrl.txt	1 Bindings for Voltage controlled regulators 7 - regulator-min-microvolt : smallest voltage consumers may set 8 - regulator-max-microvolt : largest voltage consumers may set 9 - ctrl-supply : The regulator supplying the control voltage. 10 - ctrl-voltage-range : an array of two integer values describing the range 11 (min/max) of the control voltage. The values specify 12 the control voltage needed to generate the corresponding 13 regulator-min/max-microvolt output voltage. 20 actual output voltage deviates beyond a certain 22 voltage. On larger voltage decreases this can occur [all …]
D	pwm-regulator.txt	6 Voltage Table: When in this mode, a voltage table (See below) of 7 predefined voltage <=> duty-cycle values must be 11 allow finer grained voltage selection are ignored and 13 the user if the assumptions made in continuous-voltage 16 Continuous Voltage: This mode uses the regulator's maximum and minimum 21 voltage-table mode above. This solution does make an 23 regulator voltage to run at half way between the 32 Only required for Voltage Table Mode: 33 - voltage-table: Voltage and Duty-Cycle table consisting of 2 cells 34 First cell is voltage in microvolts (uV) [all …]
D	max8997-regulator.txt	1 * Maxim MAX8997 Voltage and Current Regulator 3 The Maxim MAX8997 is a multi-function device which includes voltage and 13 - max8997,pmic-buck1-dvs-voltage: A set of 8 voltage values in micro-volt (uV) 14 units for buck1 when changing voltage using gpio dvs. Refer to [1] below 17 - max8997,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV) 18 units for buck2 when changing voltage using gpio dvs. Refer to [1] below 21 - max8997,pmic-buck5-dvs-voltage: A set of 8 voltage values in micro-volt (uV) 22 units for buck5 when changing voltage using gpio dvs. Refer to [1] below 26 property is specified, the 'max8997,pmic-buck[1/2/5]-dvs-voltage' 27 property should specify atleast one voltage level (which would be a [all …]
/kernel/linux/linux-5.10/drivers/iio/adc/
D	qcom-vadc-common.c	13 /* Voltage to temperature / 52 Voltage to temperature table for 100k pull up for NTCG104EF104 with 388 s64 voltage = 0, result = 0; in qcom_vadc_scale_volt() local 390 qcom_vadc_scale_calib(calib_graph, adc_code, absolute, &voltage); in qcom_vadc_scale_volt() 392 voltage = voltage * prescale->den; in qcom_vadc_scale_volt() 393 result = div64_s64(voltage, prescale->num); in qcom_vadc_scale_volt() 404 s64 voltage = 0; in qcom_vadc_scale_therm() local 407 qcom_vadc_scale_calib(calib_graph, adc_code, absolute, &voltage); in qcom_vadc_scale_therm() 410 voltage = div64_s64(voltage, 1000); in qcom_vadc_scale_therm() 414 voltage, result_mdec); in qcom_vadc_scale_therm() [all …]

12 3 4 5 6 7 8 9 10 >>...132