1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3 * (C) Copyright 2007
4 * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
5 */
6
7 #ifndef __FDT_SUPPORT_H
8 #define __FDT_SUPPORT_H
9
10 #ifdef CONFIG_OF_LIBFDT
11
12 #include <linux/libfdt.h>
13
14 u32 fdt_getprop_u32_default_node(const void *fdt, int off, int cell,
15 const char *prop, const u32 dflt);
16 u32 fdt_getprop_u32_default(const void *fdt, const char *path,
17 const char *prop, const u32 dflt);
18
19 /**
20 * Add data to the root of the FDT before booting the OS.
21 *
22 * See doc/device-tree-bindings/root.txt
23 *
24 * @param fdt FDT address in memory
25 * @return 0 if ok, or -FDT_ERR_... on error
26 */
27 int fdt_root(void *fdt);
28
29 /**
30 * Add chosen data the FDT before booting the OS.
31 *
32 * In particular, this adds the kernel command line (bootargs) to the FDT.
33 *
34 * @param fdt FDT address in memory
35 * @return 0 if ok, or -FDT_ERR_... on error
36 */
37 int fdt_chosen(void *fdt);
38
39 /**
40 * Add initrd information to the FDT before booting the OS.
41 *
42 * @param fdt FDT address in memory
43 * @return 0 if ok, or -FDT_ERR_... on error
44 */
45 int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end);
46
47 void do_fixup_by_path(void *fdt, const char *path, const char *prop,
48 const void *val, int len, int create);
49 void do_fixup_by_path_u32(void *fdt, const char *path, const char *prop,
50 u32 val, int create);
51
do_fixup_by_path_string(void * fdt,const char * path,const char * prop,const char * status)52 static inline void do_fixup_by_path_string(void *fdt, const char *path,
53 const char *prop, const char *status)
54 {
55 do_fixup_by_path(fdt, path, prop, status, strlen(status) + 1, 1);
56 }
57
58 void do_fixup_by_prop(void *fdt,
59 const char *pname, const void *pval, int plen,
60 const char *prop, const void *val, int len,
61 int create);
62 void do_fixup_by_prop_u32(void *fdt,
63 const char *pname, const void *pval, int plen,
64 const char *prop, u32 val, int create);
65 void do_fixup_by_compat(void *fdt, const char *compat,
66 const char *prop, const void *val, int len, int create);
67 void do_fixup_by_compat_u32(void *fdt, const char *compat,
68 const char *prop, u32 val, int create);
69 /**
70 * Setup the memory node in the DT. Creates one if none was existing before.
71 * Calls fdt_fixup_memory_banks() to populate a single reg pair covering the
72 * whole memory.
73 *
74 * @param blob FDT blob to update
75 * @param start Begin of DRAM mapping in physical memory
76 * @param size Size of the single memory bank
77 * @return 0 if ok, or -1 or -FDT_ERR_... on error
78 */
79 int fdt_fixup_memory(void *blob, u64 start, u64 size);
80
81 /**
82 * Fill the DT memory node with multiple memory banks.
83 * Creates the node if none was existing before.
84 * If banks is 0, it will not touch the existing reg property. This allows
85 * boards to not mess with the existing DT setup, which may have been
86 * filled in properly before.
87 *
88 * @param blob FDT blob to update
89 * @param start Array of size <banks> to hold the start addresses.
90 * @param size Array of size <banks> to hold the size of each region.
91 * @param banks Number of memory banks to create. If 0, the reg
92 * property will be left untouched.
93 * @return 0 if ok, or -1 or -FDT_ERR_... on error
94 */
95 #ifdef CONFIG_ARCH_FIXUP_FDT_MEMORY
96 int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks);
97 int fdt_set_usable_memory(void *blob, u64 start[], u64 size[], int banks);
98 #else
fdt_fixup_memory_banks(void * blob,u64 start[],u64 size[],int banks)99 static inline int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[],
100 int banks)
101 {
102 return 0;
103 }
104 #endif
105
106 void fdt_fixup_ethernet(void *fdt);
107 int fdt_find_and_setprop(void *fdt, const char *node, const char *prop,
108 const void *val, int len, int create);
109 void fdt_fixup_qe_firmware(void *fdt);
110
111 /**
112 * Update native-mode property of display-timings node to the phandle
113 * of the timings matching a display by name (case insensitive).
114 *
115 * see kernel Documentation/devicetree/bindings/video/display-timing.txt
116 *
117 * @param blob FDT blob to update
118 * @param path path within dt
119 * @param display name of display timing to match
120 * @return 0 if ok, or -FDT_ERR_... on error
121 */
122 int fdt_fixup_display(void *blob, const char *path, const char *display);
123
124 #if defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL)
125 void fsl_fdt_fixup_dr_usb(void *blob, bd_t *bd);
126 #else
fsl_fdt_fixup_dr_usb(void * blob,bd_t * bd)127 static inline void fsl_fdt_fixup_dr_usb(void *blob, bd_t *bd) {}
128 #endif /* defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL) */
129
130 #if defined(CONFIG_SYS_FSL_SEC_COMPAT)
131 void fdt_fixup_crypto_node(void *blob, int sec_rev);
132 #else
fdt_fixup_crypto_node(void * blob,int sec_rev)133 static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {}
134 #endif
135
136 /**
137 * Record information about a processed loadable in /fit-images (creating
138 * /fit-images if necessary).
139 *
140 * @param blob FDT blob to update
141 * @param index index of this loadable
142 * @param name name of the loadable
143 * @param load_addr address the loadable was loaded to
144 * @param size number of bytes loaded
145 * @param entry_point entry point (if specified, otherwise pass -1)
146 * @param type type (if specified, otherwise pass NULL)
147 * @param os os-type (if specified, otherwise pass NULL)
148 * @return 0 if ok, or -1 or -FDT_ERR_... on error
149 */
150 int fdt_record_loadable(void *blob, u32 index, const char *name,
151 uintptr_t load_addr, u32 size, uintptr_t entry_point,
152 const char *type, const char *os);
153
154 #ifdef CONFIG_PCI
155 #include <pci.h>
156 int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose);
157 #endif
158
159 int fdt_find_or_add_subnode(void *fdt, int parentoffset, const char *name);
160
161 /**
162 * Add board-specific data to the FDT before booting the OS.
163 *
164 * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space.
165 * This function is called if CONFIG_OF_BOARD_SETUP is defined
166 *
167 * @param blob FDT blob to update
168 * @param bd_t Pointer to board data
169 * @return 0 if ok, or -FDT_ERR_... on error
170 */
171 int ft_board_setup(void *blob, bd_t *bd);
172
173 /*
174 * The keystone2 SOC requires all 32 bit aliased addresses to be converted
175 * to their 36 physical format. This has to happen after all fdt nodes
176 * are added or modified by the image_setup_libfdt(). The ft_board_setup_ex()
177 * called at the end of the image_setup_libfdt() is to do that convertion.
178 */
179 void ft_board_setup_ex(void *blob, bd_t *bd);
180 void ft_cpu_setup(void *blob, bd_t *bd);
181 void ft_pci_setup(void *blob, bd_t *bd);
182
183 /**
184 * Add system-specific data to the FDT before booting the OS.
185 *
186 * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space.
187 * This function is called if CONFIG_OF_SYSTEM_SETUP is defined
188 *
189 * @param blob FDT blob to update
190 * @param bd_t Pointer to board data
191 * @return 0 if ok, or -FDT_ERR_... on error
192 */
193 int ft_system_setup(void *blob, bd_t *bd);
194
195 void set_working_fdt_addr(ulong addr);
196
197 /**
198 * shrink down the given blob to minimum size + some extrasize if required
199 *
200 * @param blob FDT blob to update
201 * @param extrasize additional bytes needed
202 * @return 0 if ok, or -FDT_ERR_... on error
203 */
204 int fdt_shrink_to_minimum(void *blob, uint extrasize);
205 int fdt_increase_size(void *fdt, int add_len);
206
207 int fdt_fixup_nor_flash_size(void *blob);
208
209 struct node_info;
210 #if defined(CONFIG_FDT_FIXUP_PARTITIONS)
211 void fdt_fixup_mtdparts(void *fdt, const struct node_info *node_info,
212 int node_info_size);
213 #else
fdt_fixup_mtdparts(void * fdt,const struct node_info * node_info,int node_info_size)214 static inline void fdt_fixup_mtdparts(void *fdt,
215 const struct node_info *node_info,
216 int node_info_size)
217 {
218 }
219 #endif
220
221 void fdt_del_node_and_alias(void *blob, const char *alias);
222
223 /**
224 * Translate an address from the DT into a CPU physical address
225 *
226 * The translation relies on the "ranges" property.
227 *
228 * @param blob Pointer to device tree blob
229 * @param node_offset Node DT offset
230 * @param in_addr Pointer to the address to translate
231 * @return translated address or OF_BAD_ADDR on error
232 */
233 u64 fdt_translate_address(const void *blob, int node_offset,
234 const __be32 *in_addr);
235 /**
236 * Translate a DMA address from the DT into a CPU physical address
237 *
238 * The translation relies on the "dma-ranges" property.
239 *
240 * @param blob Pointer to device tree blob
241 * @param node_offset Node DT offset
242 * @param in_addr Pointer to the DMA address to translate
243 * @return translated DMA address or OF_BAD_ADDR on error
244 */
245 u64 fdt_translate_dma_address(const void *blob, int node_offset,
246 const __be32 *in_addr);
247
248 int fdt_node_offset_by_compat_reg(void *blob, const char *compat,
249 phys_addr_t compat_off);
250 int fdt_alloc_phandle(void *blob);
251 int fdt_set_phandle(void *fdt, int nodeoffset, uint32_t phandle);
252 unsigned int fdt_create_phandle(void *fdt, int nodeoffset);
253 int fdt_add_edid(void *blob, const char *compat, unsigned char *buf);
254
255 int fdt_verify_alias_address(void *fdt, int anode, const char *alias,
256 u64 addr);
257 u64 fdt_get_base_address(const void *fdt, int node);
258 int fdt_read_range(void *fdt, int node, int n, uint64_t *child_addr,
259 uint64_t *addr, uint64_t *len);
260
261 enum fdt_status {
262 FDT_STATUS_OKAY,
263 FDT_STATUS_DISABLED,
264 FDT_STATUS_FAIL,
265 FDT_STATUS_FAIL_ERROR_CODE,
266 };
267 int fdt_set_node_status(void *fdt, int nodeoffset,
268 enum fdt_status status, unsigned int error_code);
fdt_status_okay(void * fdt,int nodeoffset)269 static inline int fdt_status_okay(void *fdt, int nodeoffset)
270 {
271 return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_OKAY, 0);
272 }
fdt_status_disabled(void * fdt,int nodeoffset)273 static inline int fdt_status_disabled(void *fdt, int nodeoffset)
274 {
275 return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_DISABLED, 0);
276 }
fdt_status_fail(void * fdt,int nodeoffset)277 static inline int fdt_status_fail(void *fdt, int nodeoffset)
278 {
279 return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_FAIL, 0);
280 }
281
282 int fdt_set_status_by_alias(void *fdt, const char *alias,
283 enum fdt_status status, unsigned int error_code);
fdt_status_okay_by_alias(void * fdt,const char * alias)284 static inline int fdt_status_okay_by_alias(void *fdt, const char *alias)
285 {
286 return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_OKAY, 0);
287 }
fdt_status_disabled_by_alias(void * fdt,const char * alias)288 static inline int fdt_status_disabled_by_alias(void *fdt, const char *alias)
289 {
290 return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_DISABLED, 0);
291 }
fdt_status_fail_by_alias(void * fdt,const char * alias)292 static inline int fdt_status_fail_by_alias(void *fdt, const char *alias)
293 {
294 return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_FAIL, 0);
295 }
296
297 /* Helper to read a big number; size is in cells (not bytes) */
fdt_read_number(const fdt32_t * cell,int size)298 static inline u64 fdt_read_number(const fdt32_t *cell, int size)
299 {
300 u64 r = 0;
301 while (size--)
302 r = (r << 32) | fdt32_to_cpu(*(cell++));
303 return r;
304 }
305
306 void fdt_support_default_count_cells(const void *blob, int parentoffset,
307 int *addrc, int *sizec);
308 int ft_verify_fdt(void *fdt);
309 int arch_fixup_memory_node(void *blob);
310
311 int fdt_setup_simplefb_node(void *fdt, int node, u64 base_address, u32 width,
312 u32 height, u32 stride, const char *format);
313
314 int fdt_overlay_apply_verbose(void *fdt, void *fdto);
315
316 /**
317 * fdt_get_cells_len() - Get the length of a type of cell in top-level nodes
318 *
319 * Returns the length of the cell type in bytes (4 or 8).
320 *
321 * @blob: Pointer to device tree blob
322 * @nr_cells_name: Name to lookup, e.g. "#address-cells"
323 */
324 int fdt_get_cells_len(const void *blob, char *nr_cells_name);
325
326 #endif /* ifdef CONFIG_OF_LIBFDT */
327
328 #ifdef USE_HOSTCC
329 int fdtdec_get_int(const void *blob, int node, const char *prop_name,
330 int default_val);
331 #endif
332 #ifdef CONFIG_FMAN_ENET
333 int fdt_update_ethernet_dt(void *blob);
334 #endif
335 #ifdef CONFIG_FSL_MC_ENET
336 void fdt_fixup_board_enet(void *blob);
337 #endif
338 #endif /* ifndef __FDT_SUPPORT_H */
339