1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2003 4 * Texas Instruments. 5 * Kshitij Gupta <kshitij@ti.com> 6 * Configuation settings for the TI OMAP Innovator board. 7 * 8 * (C) Copyright 2004 9 * ARM Ltd. 10 * Philippe Robin, <philippe.robin@arm.com> 11 * Configuration for Integrator AP board. 12 */ 13 14 #ifndef __CONFIG_H 15 #define __CONFIG_H 16 17 #include "integrator-common.h" 18 19 /* Integrator/AP-specific configuration */ 20 #define CONFIG_SYS_HZ_CLOCK 24000000 /* Timer 1 is clocked at 24Mhz */ 21 22 /* 23 * BOOTP options 24 */ 25 #define CONFIG_BOOTP_BOOTFILESIZE 26 27 /* 28 * Command line configuration. 29 */ 30 #define CONFIG_BOOTCOMMAND "" 31 32 /* Flash settings */ 33 #define CONFIG_SYS_FLASH_SIZE 0x02000000 /* 32 MiB */ 34 #define CONFIG_SYS_MAX_FLASH_SECT 128 35 36 /*----------------------------------------------------------------------- 37 * PCI definitions 38 */ 39 40 #define CONFIG_TULIP 41 #define CONFIG_EEPRO100 42 #define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ 43 44 /*----------------------------------------------------------------------- 45 * There are various dependencies on the core module (CM) fitted 46 * Users should refer to their CM user guide 47 * - when porting adjust u-boot/Makefile accordingly 48 * to define the necessary CONFIG_ s for the CM involved 49 * see e.g. integratorcp_CM926EJ-S_config 50 */ 51 #include "armcoremodule.h" 52 53 #endif /* __CONFIG_H */ 54