1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * (C) Copyright 2001-2015
4 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 * Joe Hershberger, National Instruments
6 */
7
8 #include <common.h>
9 #include <dm.h>
10 #include <env.h>
11 #include <net.h>
12 #include <dm/device-internal.h>
13 #include <dm/uclass-internal.h>
14 #include <net/pcap.h>
15 #include "eth_internal.h"
16
17 DECLARE_GLOBAL_DATA_PTR;
18
19 /**
20 * struct eth_device_priv - private structure for each Ethernet device
21 *
22 * @state: The state of the Ethernet MAC driver (defined by enum eth_state_t)
23 */
24 struct eth_device_priv {
25 enum eth_state_t state;
26 };
27
28 /**
29 * struct eth_uclass_priv - The structure attached to the uclass itself
30 *
31 * @current: The Ethernet device that the network functions are using
32 */
33 struct eth_uclass_priv {
34 struct udevice *current;
35 };
36
37 /* eth_errno - This stores the most recent failure code from DM functions */
38 static int eth_errno;
39
eth_get_uclass_priv(void)40 static struct eth_uclass_priv *eth_get_uclass_priv(void)
41 {
42 struct uclass *uc;
43
44 uclass_get(UCLASS_ETH, &uc);
45 assert(uc);
46 return uc->priv;
47 }
48
eth_set_current_to_next(void)49 void eth_set_current_to_next(void)
50 {
51 struct eth_uclass_priv *uc_priv;
52
53 uc_priv = eth_get_uclass_priv();
54 if (uc_priv->current)
55 uclass_next_device(&uc_priv->current);
56 if (!uc_priv->current)
57 uclass_first_device(UCLASS_ETH, &uc_priv->current);
58 }
59
60 /*
61 * Typically this will simply return the active device.
62 * In the case where the most recent active device was unset, this will attempt
63 * to return the first device. If that device doesn't exist or fails to probe,
64 * this function will return NULL.
65 */
eth_get_dev(void)66 struct udevice *eth_get_dev(void)
67 {
68 struct eth_uclass_priv *uc_priv;
69
70 uc_priv = eth_get_uclass_priv();
71 if (!uc_priv->current)
72 eth_errno = uclass_first_device(UCLASS_ETH,
73 &uc_priv->current);
74 return uc_priv->current;
75 }
76
77 /*
78 * Typically this will just store a device pointer.
79 * In case it was not probed, we will attempt to do so.
80 * dev may be NULL to unset the active device.
81 */
eth_set_dev(struct udevice * dev)82 void eth_set_dev(struct udevice *dev)
83 {
84 if (dev && !device_active(dev)) {
85 eth_errno = device_probe(dev);
86 if (eth_errno)
87 dev = NULL;
88 }
89
90 eth_get_uclass_priv()->current = dev;
91 }
92
93 /*
94 * Find the udevice that either has the name passed in as devname or has an
95 * alias named devname.
96 */
eth_get_dev_by_name(const char * devname)97 struct udevice *eth_get_dev_by_name(const char *devname)
98 {
99 int seq = -1;
100 char *endp = NULL;
101 const char *startp = NULL;
102 struct udevice *it;
103 struct uclass *uc;
104 int len = strlen("eth");
105
106 /* Must be longer than 3 to be an alias */
107 if (!strncmp(devname, "eth", len) && strlen(devname) > len) {
108 startp = devname + len;
109 seq = simple_strtoul(startp, &endp, 10);
110 }
111
112 uclass_get(UCLASS_ETH, &uc);
113 uclass_foreach_dev(it, uc) {
114 /*
115 * We need the seq to be valid, so try to probe it.
116 * If the probe fails, the seq will not match since it will be
117 * -1 instead of what we are looking for.
118 * We don't care about errors from probe here. Either they won't
119 * match an alias or it will match a literal name and we'll pick
120 * up the error when we try to probe again in eth_set_dev().
121 */
122 if (device_probe(it))
123 continue;
124 /* Check for the name or the sequence number to match */
125 if (strcmp(it->name, devname) == 0 ||
126 (endp > startp && it->seq == seq))
127 return it;
128 }
129
130 return NULL;
131 }
132
eth_get_ethaddr(void)133 unsigned char *eth_get_ethaddr(void)
134 {
135 struct eth_pdata *pdata;
136
137 if (eth_get_dev()) {
138 pdata = eth_get_dev()->platdata;
139 return pdata->enetaddr;
140 }
141
142 return NULL;
143 }
144
145 /* Set active state without calling start on the driver */
eth_init_state_only(void)146 int eth_init_state_only(void)
147 {
148 struct udevice *current;
149 struct eth_device_priv *priv;
150
151 current = eth_get_dev();
152 if (!current || !device_active(current))
153 return -EINVAL;
154
155 priv = current->uclass_priv;
156 priv->state = ETH_STATE_ACTIVE;
157
158 return 0;
159 }
160
161 /* Set passive state without calling stop on the driver */
eth_halt_state_only(void)162 void eth_halt_state_only(void)
163 {
164 struct udevice *current;
165 struct eth_device_priv *priv;
166
167 current = eth_get_dev();
168 if (!current || !device_active(current))
169 return;
170
171 priv = current->uclass_priv;
172 priv->state = ETH_STATE_PASSIVE;
173 }
174
eth_get_dev_index(void)175 int eth_get_dev_index(void)
176 {
177 if (eth_get_dev())
178 return eth_get_dev()->seq;
179 return -1;
180 }
181
eth_write_hwaddr(struct udevice * dev)182 static int eth_write_hwaddr(struct udevice *dev)
183 {
184 struct eth_pdata *pdata;
185 int ret = 0;
186
187 if (!dev || !device_active(dev))
188 return -EINVAL;
189
190 /* seq is valid since the device is active */
191 if (eth_get_ops(dev)->write_hwaddr && !eth_mac_skip(dev->seq)) {
192 pdata = dev->platdata;
193 if (!is_valid_ethaddr(pdata->enetaddr)) {
194 printf("\nError: %s address %pM illegal value\n",
195 dev->name, pdata->enetaddr);
196 return -EINVAL;
197 }
198
199 /*
200 * Drivers are allowed to decide not to implement this at
201 * run-time. E.g. Some devices may use it and some may not.
202 */
203 ret = eth_get_ops(dev)->write_hwaddr(dev);
204 if (ret == -ENOSYS)
205 ret = 0;
206 if (ret)
207 printf("\nWarning: %s failed to set MAC address\n",
208 dev->name);
209 }
210
211 return ret;
212 }
213
on_ethaddr(const char * name,const char * value,enum env_op op,int flags)214 static int on_ethaddr(const char *name, const char *value, enum env_op op,
215 int flags)
216 {
217 int index;
218 int retval;
219 struct udevice *dev;
220
221 /* look for an index after "eth" */
222 index = simple_strtoul(name + 3, NULL, 10);
223
224 retval = uclass_find_device_by_seq(UCLASS_ETH, index, false, &dev);
225 if (!retval) {
226 struct eth_pdata *pdata = dev->platdata;
227 switch (op) {
228 case env_op_create:
229 case env_op_overwrite:
230 string_to_enetaddr(value, pdata->enetaddr);
231 eth_write_hwaddr(dev);
232 break;
233 case env_op_delete:
234 memset(pdata->enetaddr, 0, ARP_HLEN);
235 }
236 }
237
238 return 0;
239 }
240 U_BOOT_ENV_CALLBACK(ethaddr, on_ethaddr);
241
eth_init(void)242 int eth_init(void)
243 {
244 char *ethact = env_get("ethact");
245 char *ethrotate = env_get("ethrotate");
246 struct udevice *current = NULL;
247 struct udevice *old_current;
248 int ret = -ENODEV;
249
250 /*
251 * When 'ethrotate' variable is set to 'no' and 'ethact' variable
252 * is already set to an ethernet device, we should stick to 'ethact'.
253 */
254 if ((ethrotate != NULL) && (strcmp(ethrotate, "no") == 0)) {
255 if (ethact) {
256 current = eth_get_dev_by_name(ethact);
257 if (!current)
258 return -EINVAL;
259 }
260 }
261
262 if (!current) {
263 current = eth_get_dev();
264 if (!current) {
265 printf("No ethernet found.\n");
266 return -ENODEV;
267 }
268 }
269
270 old_current = current;
271 do {
272 if (current) {
273 debug("Trying %s\n", current->name);
274
275 if (device_active(current)) {
276 ret = eth_get_ops(current)->start(current);
277 if (ret >= 0) {
278 struct eth_device_priv *priv =
279 current->uclass_priv;
280
281 priv->state = ETH_STATE_ACTIVE;
282 return 0;
283 }
284 } else {
285 ret = eth_errno;
286 }
287
288 debug("FAIL\n");
289 } else {
290 debug("PROBE FAIL\n");
291 }
292
293 /*
294 * If ethrotate is enabled, this will change "current",
295 * otherwise we will drop out of this while loop immediately
296 */
297 eth_try_another(0);
298 /* This will ensure the new "current" attempted to probe */
299 current = eth_get_dev();
300 } while (old_current != current);
301
302 return ret;
303 }
304
eth_halt(void)305 void eth_halt(void)
306 {
307 struct udevice *current;
308 struct eth_device_priv *priv;
309
310 current = eth_get_dev();
311 if (!current || !eth_is_active(current))
312 return;
313
314 eth_get_ops(current)->stop(current);
315 priv = current->uclass_priv;
316 if (priv)
317 priv->state = ETH_STATE_PASSIVE;
318 }
319
eth_is_active(struct udevice * dev)320 int eth_is_active(struct udevice *dev)
321 {
322 struct eth_device_priv *priv;
323
324 if (!dev || !device_active(dev))
325 return 0;
326
327 priv = dev_get_uclass_priv(dev);
328 return priv->state == ETH_STATE_ACTIVE;
329 }
330
eth_send(void * packet,int length)331 int eth_send(void *packet, int length)
332 {
333 struct udevice *current;
334 int ret;
335
336 current = eth_get_dev();
337 if (!current)
338 return -ENODEV;
339
340 if (!eth_is_active(current))
341 return -EINVAL;
342
343 ret = eth_get_ops(current)->send(current, packet, length);
344 if (ret < 0) {
345 /* We cannot completely return the error at present */
346 debug("%s: send() returned error %d\n", __func__, ret);
347 }
348 #if defined(CONFIG_CMD_PCAP)
349 if (ret >= 0)
350 pcap_post(packet, length, true);
351 #endif
352 return ret;
353 }
354
eth_rx(void)355 int eth_rx(void)
356 {
357 struct udevice *current;
358 uchar *packet;
359 int flags;
360 int ret;
361 int i;
362
363 current = eth_get_dev();
364 if (!current)
365 return -ENODEV;
366
367 if (!eth_is_active(current))
368 return -EINVAL;
369
370 /* Process up to 32 packets at one time */
371 flags = ETH_RECV_CHECK_DEVICE;
372 for (i = 0; i < 32; i++) {
373 ret = eth_get_ops(current)->recv(current, flags, &packet);
374 flags = 0;
375 if (ret > 0)
376 net_process_received_packet(packet, ret);
377 if (ret >= 0 && eth_get_ops(current)->free_pkt)
378 eth_get_ops(current)->free_pkt(current, packet, ret);
379 if (ret <= 0)
380 break;
381 }
382 if (ret == -EAGAIN)
383 ret = 0;
384 if (ret < 0) {
385 /* We cannot completely return the error at present */
386 debug("%s: recv() returned error %d\n", __func__, ret);
387 }
388 return ret;
389 }
390
eth_initialize(void)391 int eth_initialize(void)
392 {
393 int num_devices = 0;
394 struct udevice *dev;
395
396 eth_common_init();
397
398 /*
399 * Devices need to write the hwaddr even if not started so that Linux
400 * will have access to the hwaddr that u-boot stored for the device.
401 * This is accomplished by attempting to probe each device and calling
402 * their write_hwaddr() operation.
403 */
404 uclass_first_device_check(UCLASS_ETH, &dev);
405 if (!dev) {
406 printf("No ethernet found.\n");
407 bootstage_error(BOOTSTAGE_ID_NET_ETH_START);
408 } else {
409 char *ethprime = env_get("ethprime");
410 struct udevice *prime_dev = NULL;
411
412 if (ethprime)
413 prime_dev = eth_get_dev_by_name(ethprime);
414 if (prime_dev) {
415 eth_set_dev(prime_dev);
416 eth_current_changed();
417 } else {
418 eth_set_dev(NULL);
419 }
420
421 bootstage_mark(BOOTSTAGE_ID_NET_ETH_INIT);
422 do {
423 if (dev->seq != -1) {
424 if (num_devices)
425 printf(", ");
426
427 printf("eth%d: %s", dev->seq, dev->name);
428
429 if (ethprime && dev == prime_dev)
430 printf(" [PRIME]");
431 }
432
433 eth_write_hwaddr(dev);
434
435 if (dev->seq != -1)
436 num_devices++;
437 uclass_next_device_check(&dev);
438 } while (dev);
439
440 if (!num_devices)
441 printf("No ethernet found.\n");
442 putc('\n');
443 }
444
445 return num_devices;
446 }
447
eth_post_bind(struct udevice * dev)448 static int eth_post_bind(struct udevice *dev)
449 {
450 if (strchr(dev->name, ' ')) {
451 printf("\nError: eth device name \"%s\" has a space!\n",
452 dev->name);
453 return -EINVAL;
454 }
455
456 return 0;
457 }
458
eth_pre_unbind(struct udevice * dev)459 static int eth_pre_unbind(struct udevice *dev)
460 {
461 /* Don't hang onto a pointer that is going away */
462 if (dev == eth_get_uclass_priv()->current)
463 eth_set_dev(NULL);
464
465 return 0;
466 }
467
eth_dev_get_mac_address(struct udevice * dev,u8 mac[ARP_HLEN])468 static bool eth_dev_get_mac_address(struct udevice *dev, u8 mac[ARP_HLEN])
469 {
470 #if IS_ENABLED(CONFIG_OF_CONTROL)
471 const uint8_t *p;
472
473 p = dev_read_u8_array_ptr(dev, "mac-address", ARP_HLEN);
474 if (!p)
475 p = dev_read_u8_array_ptr(dev, "local-mac-address", ARP_HLEN);
476
477 if (!p)
478 return false;
479
480 memcpy(mac, p, ARP_HLEN);
481
482 return true;
483 #else
484 return false;
485 #endif
486 }
487
eth_post_probe(struct udevice * dev)488 static int eth_post_probe(struct udevice *dev)
489 {
490 struct eth_device_priv *priv = dev->uclass_priv;
491 struct eth_pdata *pdata = dev->platdata;
492 unsigned char env_enetaddr[ARP_HLEN];
493
494 #if defined(CONFIG_NEEDS_MANUAL_RELOC)
495 struct eth_ops *ops = eth_get_ops(dev);
496 static int reloc_done;
497
498 if (!reloc_done) {
499 if (ops->start)
500 ops->start += gd->reloc_off;
501 if (ops->send)
502 ops->send += gd->reloc_off;
503 if (ops->recv)
504 ops->recv += gd->reloc_off;
505 if (ops->free_pkt)
506 ops->free_pkt += gd->reloc_off;
507 if (ops->stop)
508 ops->stop += gd->reloc_off;
509 if (ops->mcast)
510 ops->mcast += gd->reloc_off;
511 if (ops->write_hwaddr)
512 ops->write_hwaddr += gd->reloc_off;
513 if (ops->read_rom_hwaddr)
514 ops->read_rom_hwaddr += gd->reloc_off;
515
516 reloc_done++;
517 }
518 #endif
519
520 priv->state = ETH_STATE_INIT;
521
522 /* Check if the device has a valid MAC address in device tree */
523 if (!eth_dev_get_mac_address(dev, pdata->enetaddr) ||
524 !is_valid_ethaddr(pdata->enetaddr)) {
525 /* Check if the device has a MAC address in ROM */
526 if (eth_get_ops(dev)->read_rom_hwaddr)
527 eth_get_ops(dev)->read_rom_hwaddr(dev);
528 }
529
530 eth_env_get_enetaddr_by_index("eth", dev->seq, env_enetaddr);
531 if (!is_zero_ethaddr(env_enetaddr)) {
532 if (!is_zero_ethaddr(pdata->enetaddr) &&
533 memcmp(pdata->enetaddr, env_enetaddr, ARP_HLEN)) {
534 printf("\nWarning: %s MAC addresses don't match:\n",
535 dev->name);
536 printf("Address in ROM is %pM\n",
537 pdata->enetaddr);
538 printf("Address in environment is %pM\n",
539 env_enetaddr);
540 }
541
542 /* Override the ROM MAC address */
543 memcpy(pdata->enetaddr, env_enetaddr, ARP_HLEN);
544 } else if (is_valid_ethaddr(pdata->enetaddr)) {
545 eth_env_set_enetaddr_by_index("eth", dev->seq, pdata->enetaddr);
546 printf("\nWarning: %s using MAC address from ROM\n",
547 dev->name);
548 } else if (is_zero_ethaddr(pdata->enetaddr) ||
549 !is_valid_ethaddr(pdata->enetaddr)) {
550 #ifdef CONFIG_NET_RANDOM_ETHADDR
551 net_random_ethaddr(pdata->enetaddr);
552 printf("\nWarning: %s (eth%d) using random MAC address - %pM\n",
553 dev->name, dev->seq, pdata->enetaddr);
554 #else
555 printf("\nError: %s address not set.\n",
556 dev->name);
557 return -EINVAL;
558 #endif
559 }
560
561 eth_write_hwaddr(dev);
562
563 return 0;
564 }
565
eth_pre_remove(struct udevice * dev)566 static int eth_pre_remove(struct udevice *dev)
567 {
568 struct eth_pdata *pdata = dev->platdata;
569
570 eth_get_ops(dev)->stop(dev);
571
572 /* clear the MAC address */
573 memset(pdata->enetaddr, 0, ARP_HLEN);
574
575 return 0;
576 }
577
578 UCLASS_DRIVER(eth) = {
579 .name = "eth",
580 .id = UCLASS_ETH,
581 .post_bind = eth_post_bind,
582 .pre_unbind = eth_pre_unbind,
583 .post_probe = eth_post_probe,
584 .pre_remove = eth_pre_remove,
585 .priv_auto_alloc_size = sizeof(struct eth_uclass_priv),
586 .per_device_auto_alloc_size = sizeof(struct eth_device_priv),
587 .flags = DM_UC_FLAG_SEQ_ALIAS,
588 };
589