| /third_party/uboot/u-boot-2020.01/board/freescale/ls1088a/ |
| D | README | 17 SW2 x100 0000
24 SW2 0100 0000
31 SW2 1100 0000
73 SW2 x110 1111
77 SW2 0110 1111
81 SW2 0110 1111
85 SW2 1110 1111
89 SW2 1110 1111
|
| /third_party/uboot/u-boot-2020.01/doc/ |
| D | README.mpc85xxcds | 88 SW2[2] on the carrier card before resetting the board in order to set the
101 The first two bits of SW2 control how flash is used on the board:
105 SW2=00XXXXXX FLASH: Boot bank 1, bank 2 available.
114 connected.. By convention, the user-specific bits of SW2 are used to
119 SW2=xxxxxx00 PCI SLOT INFORM: The CDS carrier is in slot0 of the Arcadia
133 SW2=0x1111yy x=Flash bank, yy=PCI slot
158 SW2=01000111
172 SW2=10011111
|
| /third_party/jerryscript/targets/mbedos5/js/ |
| D | flash_leds.js | 63 } else if (typeof SW2 !== 'undefined') {
64 button = InterruptIn(SW2);
|
| /third_party/uboot/u-boot-2020.01/board/sbc8548/ |
| D | README | 36 card. [The above discussion assumes that the SW2[1-4] has not been changed
194 alternate setting, you also need to switch SW2.8 to ON.
207 SW2.1 CFG_SYS_PLL0 1 0*
208 SW2.2 CFG_SYS_PLL1 1* 0
209 SW2.3 CFG_SYS_PLL2 1* 0
210 SW2.4 CFG_SYS_PLL3 1 0*
211 SW2.5 CFG_CORE_PLL0 1* 0
212 SW2.6 CFG_CORE_PLL1 1 0*
213 SW2.7 CFG_CORE_PLL2 1* 0
214 SW2.8 CFG_ROM_LOC1 1 0*
|
| /third_party/uboot/u-boot-2020.01/arch/arm/dts/ |
| D | r8a7792-blanche.dts | 117 label = "SW2-1";
124 label = "SW2-2";
131 label = "SW2-3";
138 label = "SW2-4";
|
| D | r8a7793-gose.dts | 70 label = "SW2-1";
77 label = "SW2-2";
84 label = "SW2-3";
91 label = "SW2-4";
|
| D | r8a7791-koelsch.dts | 84 label = "SW2-1";
91 label = "SW2-2";
98 label = "SW2-3";
105 label = "SW2-4";
|
| /third_party/uboot/u-boot-2020.01/board/variscite/dart_6ul/ |
| D | README | 21 SW2 -> 0
35 SW2 -> 1
|
| /third_party/uboot/u-boot-2020.01/board/freescale/ls1028a/ |
| D | README | 14 SW2: 1111_1000
19 SW2: 1000_1000
24 SW2: 1001_1000
85 SW2 : 1110_0110
97 SW2 : 0000_0110
|
| /third_party/uboot/u-boot-2020.01/board/freescale/t104xrdb/ |
| D | README | 287 SW2: 10111011
292 SW2: 00111011
297 SW2: 10111011
302 SW2: 00111011
309 SW2: 10111001
314 SW2: 00111001
319 SW2: 10111001
324 SW2: 00111001
|
| /third_party/uboot/u-boot-2020.01/board/freescale/mx35pdk/ |
| D | README | 14 switch the boot device with the switches SW1-SW2 on the Personality board,
77 (SW1-SW2) and on the DEBUG board (SW4-SW10).
105 SW2 all off
|
| /third_party/uboot/u-boot-2020.01/board/freescale/mpc8536ds/ |
| D | README | 36 SW2[5-8] = 1011
70 SW2[5-8] = 0111
123 SW2[5-8] = 0110
|
| /third_party/uboot/u-boot-2020.01/board/freescale/t208xrdb/ |
| D | README | 142 SW2[1:8] = '10111111'
154 set SW1[1:8] = '00010011', SW2[1] = '1', SW3[4] = '0' for NOR boot
173 set SW1[1:8] = '10000010', SW2[1] = '1', SW3[4] = '1' for NAND boot
184 set SW1[1:8] = '00100010', SW2[1] ='1' for SPI boot
193 set SW1[1:8] = '00100000', SW2[1] = '0' for SD boot
|
| /third_party/uboot/u-boot-2020.01/board/freescale/mpc837xemds/ |
| D | README | 18 SW2[1:6] refers to bits labeled 1 through 6 in order on switch 2.
19 SW2[1:8]= 0000_0001 refers to bits labeled 1 through 7 is set as "On"
|
| /third_party/uboot/u-boot-2020.01/include/power/ |
| D | mc34vr500_pmic.h | 166 SW2, enumerator
|
| /third_party/uboot/u-boot-2020.01/doc/board/freescale/ |
| D | b4860qds.rst | 142 SW2 ON ON ON ON ON ON OFF OFF
157 SW2 [1.1] = 1
163 SW2 [1.1] = 0
175 SW2 ON OFF ON OFF ON ON OFF OFF
190 SW2 [1.1] = 1
196 SW2 [1.1] = 0
|
| /third_party/uboot/u-boot-2020.01/board/freescale/t102xrdb/ |
| D | README | 194 set SW1[1:8] = '00010011', SW2[1] = '1', SW3[4] = '0' for NOR boot
196 set SW1[1:8] = '00010111', SW2[1] = '1', SW3[4] = '0' for NOR boot
223 set SW1[1:8] = '10000010', SW2[1] = '1', SW3[4] = '1' for NAND boot
237 set SW1[1:8] = '00100010', SW2[1] ='1' for SPI boot
248 set SW1[1:8] = '00100000', SW2[1] = '0' for SD boot
|
| /third_party/uboot/u-boot-2020.01/board/advantech/imx8qm_rom7720_a1/ |
| D | README | 50 Set Boot switch SW2: 1100.
|
| /third_party/skia/third_party/externals/libwebp/src/dsp/ |
| D | rescaler_msa.c | 153 SW2(val0_m, val1_m, dst, 4); in ExportRowExpand_0()
222 SW2(val0_m, val1_m, dst, 4); in ExportRowExpand_1()
321 SW2(val0_m, val1_m, dst, 4);
389 SW2(val0_m, val1_m, dst, 4);
|
| /third_party/flutter/skia/third_party/externals/libwebp/src/dsp/ |
| D | rescaler_msa.c | 153 SW2(val0_m, val1_m, dst, 4); in ExportRowExpand_0()
222 SW2(val0_m, val1_m, dst, 4); in ExportRowExpand_1()
321 SW2(val0_m, val1_m, dst, 4);
389 SW2(val0_m, val1_m, dst, 4);
|
| /third_party/ffmpeg/libavcodec/ |
| D | dcadsp.c | 393 float SW2 = coeff[2]; in lbr_bank_c() local
411 float b = src[-3] * SW1 - src[-2] * SW2; in lbr_bank_c()
412 float c = src[ 2] * SW1 + src[ 1] * SW2; in lbr_bank_c()
|
| /third_party/uboot/u-boot-2020.01/board/freescale/imx8qm_mek/ |
| D | README | 54 Set Boot switch SW2: 1100.
|
| /third_party/uboot/u-boot-2020.01/board/freescale/imx8qxp_mek/ |
| D | README | 54 Set Boot switch SW2: 1100.
|
| /third_party/uboot/u-boot-2020.01/board/freescale/t208xqds/ |
| D | README | 171 set SW1[1:8] = '00010011', SW2[1] = '1', SW6[1:4] = '0000' for NOR boot
190 set SW1[1:8] = '10000010', SW2[1] = '0' and SW6[1:4] = '1001' for NAND boot
201 set SW1[1:8] = '00100010', SW2[1] ='1' for SPI boot
212 set SW1[1:8] = '00100000', SW2[1] = '0' for SD boot
|
| /third_party/uboot/u-boot-2020.01/board/freescale/mpc8641hpcn/ |
| D | README | 33 SW2(1-4) = 1100 CONFIG_SYS_CCBPLL = 0010 :: 2X
41 SW2(5-8) = 1110 CONFIG_SYS_BOOTLOC = 1110 :: boot 16-bit localbus
|