1Amlogic Meson SPI controllers 2 3* SPIFC (SPI Flash Controller) 4 5The Meson SPIFC is a controller optimized for communication with SPI 6NOR memories, without DMA support and a 64-byte unified transmit / 7receive buffer. 8 9Required properties: 10 - compatible: should be "amlogic,meson6-spifc" or "amlogic,meson-gxbb-spifc" 11 - reg: physical base address and length of the controller registers 12 - clocks: phandle of the input clock for the baud rate generator 13 - #address-cells: should be 1 14 - #size-cells: should be 0 15 16 spi@c1108c80 { 17 compatible = "amlogic,meson6-spifc"; 18 reg = <0xc1108c80 0x80>; 19 clocks = <&clk81>; 20 #address-cells = <1>; 21 #size-cells = <0>; 22 }; 23 24* SPICC (SPI Communication Controller) 25 26The Meson SPICC is generic SPI controller for general purpose Full-Duplex 27communications with dedicated 16 words RX/TX PIO FIFOs. 28 29Required properties: 30 - compatible: should be: 31 "amlogic,meson-gx-spicc" on Amlogic GX and compatible SoCs. 32 "amlogic,meson-axg-spicc" on Amlogic AXG and compatible SoCs 33 - reg: physical base address and length of the controller registers 34 - interrupts: The interrupt specifier 35 - clock-names: Must contain "core" 36 - clocks: phandle of the input clock for the baud rate generator 37 - #address-cells: should be 1 38 - #size-cells: should be 0 39 40Optional properties: 41 - resets: phandle of the internal reset line 42 43See ../spi/spi-bus.txt for more details on SPI bus master and slave devices 44required and optional properties. 45 46Example : 47 spi@c1108d80 { 48 compatible = "amlogic,meson-gx-spicc"; 49 reg = <0xc1108d80 0x80>; 50 interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; 51 clock-names = "core"; 52 clocks = <&clk81>; 53 #address-cells = <1>; 54 #size-cells = <0>; 55 }; 56