1/* 2 * BSD LICENSE 3 * 4 * Copyright(c) 2016 Broadcom. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 10 * * Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * * Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in 14 * the documentation and/or other materials provided with the 15 * distribution. 16 * * Neither the name of Broadcom Corporation nor the names of its 17 * contributors may be used to endorse or promote products derived 18 * from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 21 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 23 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 24 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 25 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 26 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33/dts-v1/; 34 35#include "bcm-nsp.dtsi" 36#include <dt-bindings/gpio/gpio.h> 37 38/ { 39 model = "NorthStar Plus SVK (BCM958625HR)"; 40 compatible = "brcm,bcm58625", "brcm,nsp"; 41 42 aliases { 43 serial0 = &uart0; 44 }; 45 46 chosen { 47 stdout-path = "serial0:115200n8"; 48 }; 49 50 memory { 51 device_type = "memory"; 52 reg = <0x60000000 0x20000000>; 53 }; 54 55 gpio-restart { 56 compatible = "gpio-restart"; 57 gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; 58 open-source; 59 priority = <200>; 60 }; 61}; 62 63&amac0 { 64 status = "okay"; 65}; 66 67&amac1 { 68 status = "okay"; 69}; 70 71&amac2 { 72 status = "okay"; 73}; 74 75&ehci0 { 76 status = "okay"; 77}; 78 79&nand { 80 nandcs@0 { 81 compatible = "brcm,nandcs"; 82 reg = <0>; 83 nand-on-flash-bbt; 84 85 #address-cells = <1>; 86 #size-cells = <1>; 87 88 nand-ecc-strength = <24>; 89 nand-ecc-step-size = <1024>; 90 91 brcm,nand-oob-sector-size = <27>; 92 93 partition@0 { 94 label = "nboot"; 95 reg = <0x00000000 0x00200000>; 96 read-only; 97 }; 98 partition@200000 { 99 label = "nenv"; 100 reg = <0x00200000 0x00400000>; 101 }; 102 partition@600000 { 103 label = "nsystem"; 104 reg = <0x00600000 0x00a00000>; 105 }; 106 partition@1000000 { 107 label = "nrootfs"; 108 reg = <0x01000000 0x03000000>; 109 }; 110 partition@4000000 { 111 label = "ncustfs"; 112 reg = <0x04000000 0x3c000000>; 113 }; 114 }; 115}; 116 117&ohci0 { 118 status = "okay"; 119}; 120 121&pcie0 { 122 status = "okay"; 123}; 124 125&pcie1 { 126 status = "okay"; 127}; 128 129&pinctrl { 130 pinctrl-names = "default"; 131 pinctrl-0 = <&nand_sel>; 132 nand_sel: nand_sel { 133 function = "nand"; 134 groups = "nand_grp"; 135 }; 136}; 137 138&qspi { 139 bspi-sel = <0>; 140 flash: m25p80@0 { 141 #address-cells = <1>; 142 #size-cells = <1>; 143 compatible = "m25p80"; 144 reg = <0x0>; 145 spi-max-frequency = <12500000>; 146 m25p,fast-read; 147 spi-cpol; 148 spi-cpha; 149 150 partition@0 { 151 label = "boot"; 152 reg = <0x00000000 0x000a0000>; 153 }; 154 155 partition@a0000 { 156 label = "env"; 157 reg = <0x000a0000 0x00060000>; 158 }; 159 160 partition@100000 { 161 label = "system"; 162 reg = <0x00100000 0x00600000>; 163 }; 164 165 partition@700000 { 166 label = "rootfs"; 167 reg = <0x00700000 0x01900000>; 168 }; 169 }; 170}; 171 172&sata_phy0 { 173 status = "okay"; 174}; 175 176&sata_phy1 { 177 status = "okay"; 178}; 179 180&srab { 181 compatible = "brcm,bcm58625-srab", "brcm,nsp-srab"; 182 status = "okay"; 183 184 ports { 185 #address-cells = <1>; 186 #size-cells = <0>; 187 188 port@0 { 189 label = "port0"; 190 reg = <0>; 191 }; 192 193 port@1 { 194 label = "port1"; 195 reg = <1>; 196 }; 197 198 port@2 { 199 label = "port2"; 200 reg = <2>; 201 }; 202 203 port@3 { 204 label = "port3"; 205 reg = <3>; 206 }; 207 208 port@4 { 209 label = "port4"; 210 reg = <4>; 211 }; 212 213 port@8 { 214 ethernet = <&amac2>; 215 label = "cpu"; 216 reg = <8>; 217 fixed-link { 218 speed = <1000>; 219 full-duplex; 220 }; 221 }; 222 }; 223}; 224 225&uart0 { 226 status = "okay"; 227}; 228 229&usb3_phy { 230 status = "okay"; 231}; 232 233&xhci { 234 status = "okay"; 235}; 236