1/* 2 * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43#include "sunxi-h3-h5.dtsi" 44 45/ { 46 cpu0_opp_table: opp_table0 { 47 compatible = "operating-points-v2"; 48 opp-shared; 49 50 opp-648000000 { 51 opp-hz = /bits/ 64 <648000000>; 52 opp-microvolt = <1040000 1040000 1300000>; 53 clock-latency-ns = <244144>; /* 8 32k periods */ 54 }; 55 56 opp-816000000 { 57 opp-hz = /bits/ 64 <816000000>; 58 opp-microvolt = <1100000 1100000 1300000>; 59 clock-latency-ns = <244144>; /* 8 32k periods */ 60 }; 61 62 opp-1008000000 { 63 opp-hz = /bits/ 64 <1008000000>; 64 opp-microvolt = <1200000 1200000 1300000>; 65 clock-latency-ns = <244144>; /* 8 32k periods */ 66 }; 67 }; 68 69 cpus { 70 #address-cells = <1>; 71 #size-cells = <0>; 72 73 cpu0: cpu@0 { 74 compatible = "arm,cortex-a7"; 75 device_type = "cpu"; 76 reg = <0>; 77 clocks = <&ccu CLK_CPUX>; 78 clock-names = "cpu"; 79 operating-points-v2 = <&cpu0_opp_table>; 80 #cooling-cells = <2>; 81 }; 82 83 cpu1: cpu@1 { 84 compatible = "arm,cortex-a7"; 85 device_type = "cpu"; 86 reg = <1>; 87 clocks = <&ccu CLK_CPUX>; 88 clock-names = "cpu"; 89 operating-points-v2 = <&cpu0_opp_table>; 90 #cooling-cells = <2>; 91 }; 92 93 cpu2: cpu@2 { 94 compatible = "arm,cortex-a7"; 95 device_type = "cpu"; 96 reg = <2>; 97 clocks = <&ccu CLK_CPUX>; 98 clock-names = "cpu"; 99 operating-points-v2 = <&cpu0_opp_table>; 100 #cooling-cells = <2>; 101 }; 102 103 cpu3: cpu@3 { 104 compatible = "arm,cortex-a7"; 105 device_type = "cpu"; 106 reg = <3>; 107 clocks = <&ccu CLK_CPUX>; 108 clock-names = "cpu"; 109 operating-points-v2 = <&cpu0_opp_table>; 110 #cooling-cells = <2>; 111 }; 112 }; 113 114 pmu { 115 compatible = "arm,cortex-a7-pmu"; 116 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, 117 <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, 118 <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, 119 <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; 120 interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; 121 }; 122 123 timer { 124 compatible = "arm,armv7-timer"; 125 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 126 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 127 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 128 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; 129 }; 130 131 soc { 132 system-control@1c00000 { 133 compatible = "allwinner,sun8i-h3-system-control"; 134 reg = <0x01c00000 0x1000>; 135 #address-cells = <1>; 136 #size-cells = <1>; 137 ranges; 138 139 sram_c: sram@1d00000 { 140 compatible = "mmio-sram"; 141 reg = <0x01d00000 0x80000>; 142 #address-cells = <1>; 143 #size-cells = <1>; 144 ranges = <0 0x01d00000 0x80000>; 145 146 ve_sram: sram-section@0 { 147 compatible = "allwinner,sun8i-h3-sram-c1", 148 "allwinner,sun4i-a10-sram-c1"; 149 reg = <0x000000 0x80000>; 150 }; 151 }; 152 }; 153 154 mali: gpu@1c40000 { 155 compatible = "allwinner,sun8i-h3-mali", "arm,mali-400"; 156 reg = <0x01c40000 0x10000>; 157 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, 158 <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, 159 <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, 160 <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, 161 <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, 162 <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, 163 <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; 164 interrupt-names = "gp", 165 "gpmmu", 166 "pp0", 167 "ppmmu0", 168 "pp1", 169 "ppmmu1", 170 "pmu"; 171 clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; 172 clock-names = "bus", "core"; 173 resets = <&ccu RST_BUS_GPU>; 174 175 assigned-clocks = <&ccu CLK_GPU>; 176 assigned-clock-rates = <384000000>; 177 }; 178 }; 179}; 180 181&ccu { 182 compatible = "allwinner,sun8i-h3-ccu"; 183}; 184 185&display_clocks { 186 compatible = "allwinner,sun8i-h3-de2-clk"; 187}; 188 189&mmc0 { 190 compatible = "allwinner,sun7i-a20-mmc"; 191 clocks = <&ccu CLK_BUS_MMC0>, 192 <&ccu CLK_MMC0>, 193 <&ccu CLK_MMC0_OUTPUT>, 194 <&ccu CLK_MMC0_SAMPLE>; 195 clock-names = "ahb", 196 "mmc", 197 "output", 198 "sample"; 199}; 200 201&mmc1 { 202 compatible = "allwinner,sun7i-a20-mmc"; 203 clocks = <&ccu CLK_BUS_MMC1>, 204 <&ccu CLK_MMC1>, 205 <&ccu CLK_MMC1_OUTPUT>, 206 <&ccu CLK_MMC1_SAMPLE>; 207 clock-names = "ahb", 208 "mmc", 209 "output", 210 "sample"; 211}; 212 213&mmc2 { 214 compatible = "allwinner,sun7i-a20-mmc"; 215 clocks = <&ccu CLK_BUS_MMC2>, 216 <&ccu CLK_MMC2>, 217 <&ccu CLK_MMC2_OUTPUT>, 218 <&ccu CLK_MMC2_SAMPLE>; 219 clock-names = "ahb", 220 "mmc", 221 "output", 222 "sample"; 223}; 224 225&pio { 226 compatible = "allwinner,sun8i-h3-pinctrl"; 227}; 228