1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2012-2012 Henrik Nordstrom <henrik@henriknordstrom.net> 4 * 5 * (C) Copyright 2007-2011 6 * Allwinner Technology Co., Ltd. <www.allwinnertech.com> 7 * Tom Cubie <tangliang@allwinnertech.com> 8 * 9 * Configuration settings for the Allwinner sunxi series of boards. 10 */ 11 12 #ifndef _SUNXI_COMMON_CONFIG_H 13 #define _SUNXI_COMMON_CONFIG_H 14 15 #include <asm/arch/cpu.h> 16 #include <linux/stringify.h> 17 18 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 19 /* 20 * The U-Boot workarounds bugs in the outdated buggy sunxi-3.4 kernels at the 21 * expense of restricting some features, so the regular machine id values can 22 * be used. 23 */ 24 # define CONFIG_MACH_TYPE_COMPAT_REV 0 25 #else 26 /* 27 * A compatibility guard to prevent loading outdated buggy sunxi-3.4 kernels. 28 * Only sunxi-3.4 kernels with appropriate fixes applied are able to pass 29 * beyond the machine id check. 30 */ 31 # define CONFIG_MACH_TYPE_COMPAT_REV 1 32 #endif 33 34 #ifdef CONFIG_ARM64 35 #define CONFIG_SYS_BOOTM_LEN (32 << 20) 36 #endif 37 38 /* Serial & console */ 39 #define CONFIG_SYS_NS16550_SERIAL 40 /* ns16550 reg in the low bits of cpu reg */ 41 #define CONFIG_SYS_NS16550_CLK 24000000 42 #ifndef CONFIG_DM_SERIAL 43 # define CONFIG_SYS_NS16550_REG_SIZE -4 44 # define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE 45 # define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE 46 # define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE 47 # define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE 48 # define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE 49 #endif 50 51 /* CPU */ 52 #define COUNTER_FREQUENCY 24000000 53 54 /* 55 * The DRAM Base differs between some models. We cannot use macros for the 56 * CONFIG_FOO defines which contain the DRAM base address since they end 57 * up unexpanded in include/autoconf.mk . 58 * 59 * So we have to have this #ifdef #else #endif block for these. 60 */ 61 #ifdef CONFIG_MACH_SUN9I 62 #define SDRAM_OFFSET(x) 0x2##x 63 #define CONFIG_SYS_SDRAM_BASE 0x20000000 64 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* default load address */ 65 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 66 * since it needs to fit in with the other values. By also #defining it 67 * we get warnings if the Kconfig value mismatches. */ 68 #define CONFIG_SPL_STACK_R_ADDR 0x2fe00000 69 #define CONFIG_SPL_BSS_START_ADDR 0x2ff80000 70 #else 71 #define SDRAM_OFFSET(x) 0x4##x 72 #define CONFIG_SYS_SDRAM_BASE 0x40000000 73 #define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */ 74 /* V3s do not have enough memory to place code at 0x4a000000 */ 75 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 76 * since it needs to fit in with the other values. By also #defining it 77 * we get warnings if the Kconfig value mismatches. */ 78 #define CONFIG_SPL_STACK_R_ADDR 0x4fe00000 79 #define CONFIG_SPL_BSS_START_ADDR 0x4ff80000 80 #endif 81 82 #define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 /* 512 KiB */ 83 84 /* 85 * The A80's A1 sram starts at 0x00010000 rather then at 0x00000000 and is 86 * slightly bigger. Note that it is possible to map the first 32 KiB of the 87 * A1 at 0x00000000 like with older SoCs by writing 0x16aa0001 to the 88 * undocumented 0x008000e0 SYS_CTRL register. Where the 16aa is a key and 89 * the 1 actually activates the mapping of the first 32 KiB to 0x00000000. 90 * A64 and H5 also has SRAM A1 at 0x00010000, but no magic remap register 91 * is known yet. 92 * H6 has SRAM A1 at 0x00020000. 93 */ 94 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SUNXI_SRAM_ADDRESS 95 /* FIXME: this may be larger on some SoCs */ 96 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */ 97 98 #define CONFIG_SYS_INIT_SP_OFFSET \ 99 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 100 #define CONFIG_SYS_INIT_SP_ADDR \ 101 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 102 103 #define PHYS_SDRAM_0 CONFIG_SYS_SDRAM_BASE 104 #define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */ 105 106 #ifdef CONFIG_AHCI 107 #define CONFIG_SYS_64BIT_LBA 108 #endif 109 110 #define CONFIG_SETUP_MEMORY_TAGS 111 #define CONFIG_CMDLINE_TAG 112 #define CONFIG_INITRD_TAG 113 #define CONFIG_SERIAL_TAG 114 115 #ifdef CONFIG_NAND_SUNXI 116 #define CONFIG_SYS_NAND_MAX_ECCPOS 1664 117 #define CONFIG_SYS_NAND_ONFI_DETECTION 118 #define CONFIG_SYS_MAX_NAND_DEVICE 8 119 #endif 120 121 /* mmc config */ 122 #ifdef CONFIG_MMC 123 #define CONFIG_MMC_SUNXI_SLOT 0 124 #endif 125 126 #if defined(CONFIG_ENV_IS_IN_MMC) 127 128 #ifdef CONFIG_ARM64 129 /* 130 * This is actually (CONFIG_ENV_OFFSET - 131 * (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)), but the value will be used 132 * directly in a makefile, without the preprocessor expansion. 133 */ 134 #define CONFIG_BOARD_SIZE_LIMIT 0x7e000 135 #endif 136 137 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 138 /* If we have two devices (most likely eMMC + MMC), favour the eMMC */ 139 #define CONFIG_SYS_MMC_ENV_DEV 1 140 #else 141 /* Otherwise, use the only device we have */ 142 #define CONFIG_SYS_MMC_ENV_DEV 0 143 #endif 144 #define CONFIG_SYS_MMC_MAX_DEVICE 4 145 #endif 146 147 #ifndef CONFIG_MACH_SUN8I_V3S 148 /* 64MB of malloc() pool */ 149 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (64 << 20)) 150 #else 151 /* 2MB of malloc() pool */ 152 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (2 << 20)) 153 #endif 154 155 /* 156 * Miscellaneous configurable options 157 */ 158 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 159 #define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */ 160 161 /* standalone support */ 162 #define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR 163 164 /* FLASH and environment organization */ 165 166 #define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */ 167 168 #ifndef CONFIG_ARM64 /* AArch64 FEL support is not ready yet */ 169 #define CONFIG_SPL_BOARD_LOAD_IMAGE 170 #endif 171 172 /* 173 * We cannot use expressions here, because expressions won't be evaluated in 174 * autoconf.mk. 175 */ 176 #if CONFIG_SUNXI_SRAM_ADDRESS == 0x10000 177 #define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */ 178 #ifdef CONFIG_ARM64 179 /* end of SRAM A2 for now, as SRAM A1 is pretty tight for an ARM64 build */ 180 #define LOW_LEVEL_SRAM_STACK 0x00054000 181 #else 182 #define LOW_LEVEL_SRAM_STACK 0x00018000 183 #endif /* !CONFIG_ARM64 */ 184 #elif CONFIG_SUNXI_SRAM_ADDRESS == 0x20000 185 #define CONFIG_SPL_MAX_SIZE 0x7fa0 /* 32 KiB */ 186 /* end of SRAM A2 on H6 for now */ 187 #define LOW_LEVEL_SRAM_STACK 0x00118000 188 #else 189 #define CONFIG_SPL_MAX_SIZE 0x5fa0 /* 24KB on sun4i/sun7i */ 190 #define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */ 191 #endif 192 193 #define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK 194 195 #define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */ 196 197 198 /* I2C */ 199 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 200 defined CONFIG_SY8106A_POWER 201 #endif 202 203 #if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \ 204 defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \ 205 defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE 206 #define CONFIG_SYS_I2C_MVTWSI 207 #ifndef CONFIG_DM_I2C 208 #define CONFIG_SYS_I2C 209 #define CONFIG_SYS_I2C_SPEED 400000 210 #define CONFIG_SYS_I2C_SLAVE 0x7f 211 #endif 212 #endif 213 214 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD) 215 #define CONFIG_SYS_I2C_SOFT 216 #define CONFIG_SYS_I2C_SOFT_SPEED 50000 217 #define CONFIG_SYS_I2C_SOFT_SLAVE 0x00 218 /* We use pin names in Kconfig and sunxi_name_to_gpio() */ 219 #define CONFIG_SOFT_I2C_GPIO_SDA soft_i2c_gpio_sda 220 #define CONFIG_SOFT_I2C_GPIO_SCL soft_i2c_gpio_scl 221 #ifndef __ASSEMBLY__ 222 extern int soft_i2c_gpio_sda; 223 extern int soft_i2c_gpio_scl; 224 #endif 225 #define CONFIG_VIDEO_LCD_I2C_BUS 0 /* The lcd panel soft i2c is bus 0 */ 226 #define CONFIG_SYS_SPD_BUS_NUM 1 /* And the axp209 i2c bus is bus 1 */ 227 #else 228 #define CONFIG_SYS_SPD_BUS_NUM 0 /* The axp209 i2c bus is bus 0 */ 229 #define CONFIG_VIDEO_LCD_I2C_BUS -1 /* NA, but necessary to compile */ 230 #endif 231 232 /* PMU */ 233 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \ 234 defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER || \ 235 defined CONFIG_SY8106A_POWER 236 #endif 237 238 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE 239 #if CONFIG_CONS_INDEX == 1 240 #ifdef CONFIG_MACH_SUN9I 241 #define OF_STDOUT_PATH "/soc/serial@07000000:115200" 242 #else 243 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28000:115200" 244 #endif 245 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I) 246 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28400:115200" 247 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I) 248 #define OF_STDOUT_PATH "/soc@01c00000/serial@01c28800:115200" 249 #elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I) 250 #define OF_STDOUT_PATH "/soc@01c00000/serial@01f02800:115200" 251 #else 252 #error Unsupported console port nr. Please fix stdout-path in sunxi-common.h. 253 #endif 254 #endif /* ifdef CONFIG_REQUIRE_SERIAL_CONSOLE */ 255 256 #ifdef CONFIG_VIDEO_SUNXI 257 /* 258 * The amount of RAM to keep free at the top of RAM when relocating u-boot, 259 * to use as framebuffer. This must be a multiple of 4096. 260 */ 261 #define CONFIG_SUNXI_MAX_FB_SIZE (16 << 20) 262 263 #define CONFIG_VIDEO_LOGO 264 #define CONFIG_VIDEO_STD_TIMINGS 265 #define CONFIG_I2C_EDID 266 #define VIDEO_LINE_LEN (pGD->plnSizeX) 267 268 /* allow both serial and cfb console. */ 269 /* stop x86 thinking in cfbconsole from trying to init a pc keyboard */ 270 271 #endif /* CONFIG_VIDEO_SUNXI */ 272 273 /* Ethernet support */ 274 275 #ifdef CONFIG_SUN7I_GMAC 276 #define CONFIG_PHY_REALTEK 277 #endif 278 279 #ifdef CONFIG_USB_EHCI_HCD 280 #define CONFIG_USB_OHCI_NEW 281 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 282 #endif 283 284 #ifndef CONFIG_SPL_BUILD 285 286 #ifdef CONFIG_ARM64 287 /* 288 * Boards seem to come with at least 512MB of DRAM. 289 * The kernel should go at 512K, which is the default text offset (that will 290 * be adjusted at runtime if needed). 291 * There is no compression for arm64 kernels (yet), so leave some space 292 * for really big kernels, say 256MB for now. 293 * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd. 294 * Align the initrd to a 2MB page. 295 */ 296 #define BOOTM_SIZE __stringify(0xa000000) 297 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) 298 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000)) 299 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000)) 300 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000)) 301 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FE00000)) 302 303 #else 304 /* 305 * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc. 306 * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, 307 * 1M script, 1M pxe and the ramdisk at the end. 308 */ 309 #ifndef CONFIG_MACH_SUN8I_V3S 310 #define BOOTM_SIZE __stringify(0xa000000) 311 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(2000000)) 312 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(3000000)) 313 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000)) 314 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000)) 315 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000)) 316 #else 317 /* 318 * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc. 319 * 16M uncompressed kernel, 8M compressed kernel, 1M fdt, 320 * 1M script, 1M pxe and the ramdisk at the end. 321 */ 322 #define BOOTM_SIZE __stringify(0x2e00000) 323 #define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(1000000)) 324 #define FDT_ADDR_R __stringify(SDRAM_OFFSET(1800000)) 325 #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(1900000)) 326 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000)) 327 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000)) 328 #endif 329 #endif 330 331 #define MEM_LAYOUT_ENV_SETTINGS \ 332 "bootm_size=" BOOTM_SIZE "\0" \ 333 "kernel_addr_r=" KERNEL_ADDR_R "\0" \ 334 "fdt_addr_r=" FDT_ADDR_R "\0" \ 335 "scriptaddr=" SCRIPT_ADDR_R "\0" \ 336 "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \ 337 "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" 338 339 #define DFU_ALT_INFO_RAM \ 340 "dfu_alt_info_ram=" \ 341 "kernel ram " KERNEL_ADDR_R " 0x1000000;" \ 342 "fdt ram " FDT_ADDR_R " 0x100000;" \ 343 "ramdisk ram " RAMDISK_ADDR_R " 0x4000000\0" 344 345 #ifdef CONFIG_MMC 346 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1 347 #define BOOTENV_DEV_MMC_AUTO(devtypeu, devtypel, instance) \ 348 BOOTENV_DEV_MMC(MMC, mmc, 0) \ 349 BOOTENV_DEV_MMC(MMC, mmc, 1) \ 350 "bootcmd_mmc_auto=" \ 351 "if test ${mmc_bootdev} -eq 1; then " \ 352 "run bootcmd_mmc1; " \ 353 "run bootcmd_mmc0; " \ 354 "elif test ${mmc_bootdev} -eq 0; then " \ 355 "run bootcmd_mmc0; " \ 356 "run bootcmd_mmc1; " \ 357 "fi\0" 358 359 #define BOOTENV_DEV_NAME_MMC_AUTO(devtypeu, devtypel, instance) \ 360 "mmc_auto " 361 362 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC_AUTO, mmc_auto, na) 363 #else 364 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) 365 #endif 366 #else 367 #define BOOT_TARGET_DEVICES_MMC(func) 368 #endif 369 370 #ifdef CONFIG_AHCI 371 #define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) 372 #else 373 #define BOOT_TARGET_DEVICES_SCSI(func) 374 #endif 375 376 #ifdef CONFIG_USB_STORAGE 377 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) 378 #else 379 #define BOOT_TARGET_DEVICES_USB(func) 380 #endif 381 382 #ifdef CONFIG_CMD_PXE 383 #define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na) 384 #else 385 #define BOOT_TARGET_DEVICES_PXE(func) 386 #endif 387 388 #ifdef CONFIG_CMD_DHCP 389 #define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na) 390 #else 391 #define BOOT_TARGET_DEVICES_DHCP(func) 392 #endif 393 394 /* FEL boot support, auto-execute boot.scr if a script address was provided */ 395 #define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \ 396 "bootcmd_fel=" \ 397 "if test -n ${fel_booted} && test -n ${fel_scriptaddr}; then " \ 398 "echo '(FEL boot)'; " \ 399 "source ${fel_scriptaddr}; " \ 400 "fi\0" 401 #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \ 402 "fel " 403 404 #define BOOT_TARGET_DEVICES(func) \ 405 func(FEL, fel, na) \ 406 BOOT_TARGET_DEVICES_MMC(func) \ 407 BOOT_TARGET_DEVICES_SCSI(func) \ 408 BOOT_TARGET_DEVICES_USB(func) \ 409 BOOT_TARGET_DEVICES_PXE(func) \ 410 BOOT_TARGET_DEVICES_DHCP(func) 411 412 #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT 413 #define BOOTCMD_SUNXI_COMPAT \ 414 "bootcmd_sunxi_compat=" \ 415 "setenv root /dev/mmcblk0p3 rootwait; " \ 416 "if ext2load mmc 0 0x44000000 uEnv.txt; then " \ 417 "echo Loaded environment from uEnv.txt; " \ 418 "env import -t 0x44000000 ${filesize}; " \ 419 "fi; " \ 420 "setenv bootargs console=${console} root=${root} ${extraargs}; " \ 421 "ext2load mmc 0 0x43000000 script.bin && " \ 422 "ext2load mmc 0 0x48000000 uImage && " \ 423 "bootm 0x48000000\0" 424 #else 425 #define BOOTCMD_SUNXI_COMPAT 426 #endif 427 428 #include <config_distro_bootcmd.h> 429 430 #ifdef CONFIG_USB_KEYBOARD 431 #define CONSOLE_STDIN_SETTINGS \ 432 "preboot=usb start\0" \ 433 "stdin=serial,usbkbd\0" 434 #else 435 #define CONSOLE_STDIN_SETTINGS \ 436 "stdin=serial\0" 437 #endif 438 439 #ifdef CONFIG_VIDEO 440 #define CONSOLE_STDOUT_SETTINGS \ 441 "stdout=serial,vga\0" \ 442 "stderr=serial,vga\0" 443 #elif CONFIG_DM_VIDEO 444 #define CONSOLE_STDOUT_SETTINGS \ 445 "stdout=serial,vidconsole\0" \ 446 "stderr=serial,vidconsole\0" 447 #else 448 #define CONSOLE_STDOUT_SETTINGS \ 449 "stdout=serial\0" \ 450 "stderr=serial\0" 451 #endif 452 453 #ifdef CONFIG_MTDIDS_DEFAULT 454 #define SUNXI_MTDIDS_DEFAULT \ 455 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" 456 #else 457 #define SUNXI_MTDIDS_DEFAULT 458 #endif 459 460 #ifdef CONFIG_MTDPARTS_DEFAULT 461 #define SUNXI_MTDPARTS_DEFAULT \ 462 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" 463 #else 464 #define SUNXI_MTDPARTS_DEFAULT 465 #endif 466 467 #define PARTS_DEFAULT \ 468 "name=loader1,start=8k,size=32k,uuid=${uuid_gpt_loader1};" \ 469 "name=loader2,size=984k,uuid=${uuid_gpt_loader2};" \ 470 "name=esp,size=128M,bootable,uuid=${uuid_gpt_esp};" \ 471 "name=system,size=-,uuid=${uuid_gpt_system};" 472 473 #define UUID_GPT_ESP "c12a7328-f81f-11d2-ba4b-00a0c93ec93b" 474 475 #ifdef CONFIG_ARM64 476 #define UUID_GPT_SYSTEM "b921b045-1df0-41c3-af44-4c6f280d3fae" 477 #else 478 #define UUID_GPT_SYSTEM "69dad710-2ce4-4e3c-b16c-21a1d49abed3" 479 #endif 480 481 #define CONSOLE_ENV_SETTINGS \ 482 CONSOLE_STDIN_SETTINGS \ 483 CONSOLE_STDOUT_SETTINGS 484 485 #ifdef CONFIG_ARM64 486 #define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb" 487 #else 488 #define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb" 489 #endif 490 491 #define CONFIG_EXTRA_ENV_SETTINGS \ 492 CONSOLE_ENV_SETTINGS \ 493 MEM_LAYOUT_ENV_SETTINGS \ 494 DFU_ALT_INFO_RAM \ 495 "fdtfile=" FDTFILE "\0" \ 496 "console=ttyS0,115200\0" \ 497 SUNXI_MTDIDS_DEFAULT \ 498 SUNXI_MTDPARTS_DEFAULT \ 499 "uuid_gpt_esp=" UUID_GPT_ESP "\0" \ 500 "uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \ 501 "partitions=" PARTS_DEFAULT "\0" \ 502 BOOTCMD_SUNXI_COMPAT \ 503 BOOTENV 504 505 #else /* ifndef CONFIG_SPL_BUILD */ 506 #define CONFIG_EXTRA_ENV_SETTINGS 507 #endif 508 509 #endif /* _SUNXI_COMMON_CONFIG_H */ 510