Lines Matching full:attribute
132 * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the
141 * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
144 * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically,
196 * %NL80211_ATTR_WANT_1X_4WAY_HS attribute flag. Drivers supporting this
197 * offload may reject the %NL80211_CMD_CONNECT when the attribute flag is
284 * attribute given in wiphy capabilities.
340 * attribute %NL80211_ATTR_IFINDEX.
482 * using the %NL80211_ATTR_IE attribute. The first cycle of the
485 * scans, it will allow such when the caller provides the flag attribute
565 * included %NL80211_ATTR_FRAME attribute contains the management frame
568 * case the %NL80211_ATTR_FRAME attribute is replaced with a
575 * %NL80211_ATTR_PREV_BSSID attribute is used to specify whether the
576 * request is for the initial association to an ESS (that attribute not
577 * included) or for reassociation within the ESS (that attribute is
596 * FREQ attribute (for the initial frequency if no peer can be found)
597 * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those
601 * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not
606 * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute
607 * to identify the device, and the TESTDATA blob attribute to pass through
613 * %NL80211_ATTR_SSID attribute, and can optionally specify the association
645 * This attribute is ignored if driver does not support roam scan.
648 * determined by the %NL80211_ATTR_STATUS_CODE attribute (0 = success,
685 * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to
696 * requires an interface index, a frame type attribute (optional for
698 * and a match attribute containing the first few bytes of the frame
703 * The %NL80211_ATTR_RECEIVE_MULTICAST flag attribute can be given if
725 * counters which will be updated to the current value. This attribute
804 * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
809 * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason
833 * %NL80211_ATTR_TDLS_ACTION attribute determines the type of frame to be
846 * For the event, the %NL80211_ATTR_MAC attribute carries the TA and
956 * by the %NL80211_ATTR_VENDOR_ID attribute and a sub-command in
959 * For feature advertisement, the %NL80211_ATTR_VENDOR_DATA attribute is
960 * used in the wiphy data as a nested attribute containing descriptions
966 * that attribute is not included, QoS mapping is disabled. Since this
976 * If the admitted time attribute is not added then the request just checks
1020 * %NL80211_ATTR_NAN_MASTER_PREF attribute and optional
1028 * with %NL80211_ATTR_NAN_FUNC nested attribute. When called, this
1054 * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
1102 * %NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH
1115 * the %NL80211_ATTR_FTM_RESPONDER_STATS attribute.
1119 * %NL80211_ATTR_PEER_MEASUREMENTS attribute. Optionally, MAC address
1122 * If a timeout is requested, use the %NL80211_ATTR_TIMEOUT attribute.
1162 * Here attribute %NL80211_ATTR_MAC is used to specify connected mesh
1167 * is passed using %NL80211_ATTR_TID_CONFIG attribute.
1440 * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
1448 * %NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes
1451 * @NL80211_ATTR_CHANNEL_WIDTH: u32 attribute containing one of the values
1462 * this attribute)
1466 * This attribute is now deprecated.
1499 * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key
1500 * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the
1523 * given for %NL80211_CMD_GET_STATION, nested attribute containing
1534 * info given for %NL80211_CMD_GET_MPATH, nested attribute described at
1542 * For example, 'CR', for Costa Rica. This attribute is used by the kernel
1543 * to query the CRDA to retrieve one regulatory domain. This attribute can
1564 * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all
1565 * supported interface types, each a flag attribute with the number
1575 * a single scan request, a wiphy attribute.
1577 * scan with a single scheduled scan request, a wiphy attribute.
1583 * used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute.
1585 * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
1586 * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
1595 * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
1599 * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header
1602 * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets)
1612 * due to considerations from a beacon hint. This attribute reflects
1614 * attributes consists of a nested attribute containing
1617 * due to considerations from a beacon hint. This attribute reflects
1619 * attributes consists of a nested attribute containing
1633 * this attribute can be used with %NL80211_CMD_ASSOCIATE and
1640 * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
1653 * attribute is also used as a flag in the wiphy information to
1661 * socket. If this attribute is missing, then legacy behavior of sending
1677 * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
1692 * This attribute is also sent in response to @NL80211_CMD_GET_WIPHY,
1706 * Reassociate Request frame (with the value of this attribute in the
1710 * @NL80211_ATTR_KEY: key information in a nested attribute with
1713 * and join_ibss(), key information is in a nested attribute each
1729 * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute
1734 * cache, a wiphy attribute.
1737 * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that
1747 * rates based on negotiated supported rates information. This attribute
1756 * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
1760 * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a
1761 * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
1764 * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a
1765 * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
1768 * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
1774 * nested attribute with %NL80211_ATTR_CQM_* sub-attributes.
1776 * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command
1832 * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags
1838 * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
1858 * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more
1876 * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
1879 * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
1884 * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information
1888 * nested array attribute containing an entry for each band, with the entry
1906 * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration
1914 * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching
1920 * applications use this attribute.
1921 * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and
1938 * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices
1940 * with support for the features listed in this attribute, see
1948 * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from
1952 * This attribute holds a bitmap of the supported protocols for
1984 * this attribute is (depending on the driver capabilities) added to
2007 * Status code). However, those fields are included in the attribute data
2008 * for all authentication algorithms to keep the attribute definition
2027 * carried in a u32 attribute
2032 * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum
2053 * &enum nl80211_protocol_features, the attribute is a u32.
2055 * @NL80211_ATTR_SPLIT_WIPHY_DUMP: flag attribute, userspace supports
2076 * @NL80211_ATTR_CH_SWITCH_COUNT: u32 attribute specifying the number of TBTT's
2078 * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission
2112 * u8 attribute.
2118 * attribute is also used for vendor command feature advertisement
2129 * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many
2138 * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum
2144 * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface
2157 * attribute, the notifications will be sent to the %NL80211_MCGRP_NAN
2168 * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
2172 * shall support Radio Resource Measurements (11k). This attribute can be
2184 * @NL80211_ATTR_WIPHY_DYN_ACK: flag attribute used to enable ACK timeout
2190 * @NL80211_ATTR_TSID: a TSID value (u8 attribute)
2191 * @NL80211_ATTR_USER_PRIO: user priority value (u8 attribute)
2193 * (per second) (u16 attribute)
2202 * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device
2227 * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
2231 * scheduled scan supported by the device (u32), a wiphy attribute.
2233 * a scan plan (u32), a wiphy attribute.
2235 * a scan plan (u32), a wiphy attribute.
2241 * Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan.
2242 * @NL80211_ATTR_PBSS: flag attribute. If set it means operate
2246 * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the
2250 * it contains the behaviour-specific attribute containing the parameters for
2256 * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment
2258 * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes:
2273 * This attribute is used only if all interfaces are in monitor mode.
2274 * Set this attribute in order to monitor packets using the given MU-MIMO
2285 * attribute must not be included).
2290 * maximum measurement duration allowed. This attribute is used with
2293 * @NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY: flag attribute that indicates
2309 * would be set. This attribute is used with
2315 * attribute.
2316 * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute.
2321 * Request/Response frame protection. This attribute contains the 16 octet
2325 * packets should be send out as unicast to all stations (flag attribute).
2341 * better BSSs. The attribute value is a packed structure
2345 * u32 attribute with an &enum nl80211_timeout_reason value. This is used,
2370 * @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with
2375 * support this attribute specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME
2378 * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to
2383 * @NL80211_ATTR_WANT_1X_4WAY_HS: flag attribute which user-space can include
2390 * authentication operation (u32 attribute with an
2393 * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user
2394 * space supports external authentication. This attribute shall be used
2400 * u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED.
2402 * @NL80211_ATTR_TXQ_STATS: TXQ statistics (nested attribute, see &enum
2415 * @NL80211_ATTR_FTM_RESPONDER: nested attribute which user-space can include
2420 * @NL80211_ATTR_FTM_RESPONDER_STATS: Nested attribute with FTM responder
2424 * if the attribute is not given no timeout is requested. Note that 0 is an
2440 * allows to set Tx power for a station. If this attribute is not included,
2445 * @NL80211_ATTR_SAE_PASSWORD: attribute for passing SAE password material. It
2451 * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection
2456 * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. (u8 attribute)
2458 * the allowed channel bandwidth configurations. (u8 attribute)
2464 * @NL80211_ATTR_HE_BSS_COLOR: nested attribute for BSS Color Settings.
2466 * @NL80211_ATTR_IFTYPE_AKM_SUITES: nested array attribute, with each entry
2468 * attribute is sent in a response to %NL80211_CMD_GET_WIPHY indicating
2474 * nested attribute with &enum nl80211_tid_config_attr sub-attributes;
2511 * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies
2517 * discovery. It is a nested attribute, see
2521 * unsolicited broadcast probe response. It is a nested attribute, see
2531 * @NL80211_ATTR_MAX: highest attribute number currently defined
3137 * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved
3245 * These attribute types are used with %NL80211_STA_INFO_TXRATE
3251 * (>6.5535Gbps) only 32-bit attribute is included.
3252 * User space tools encouraged to use the 32-bit attribute and fall
3255 * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
3311 * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM
3314 * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved
3341 * These attribute types are used with %NL80211_ATTR_STA_INFO
3344 * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
3355 * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
3370 * attribute, like NL80211_STA_INFO_TX_BITRATE.
3371 * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
3393 * This is a nested attribute where each the inner attribute number is the
3399 * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment
3419 * @NL80211_STA_INFO_MAX: highest possible station info attribute
3478 * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved
3486 * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment
3487 * @NL80211_TID_STATS_TXQ_STATS: TXQ stats (nested attribute)
3489 * @NL80211_TID_STATS_MAX: highest numbered attribute here
3507 * @__NL80211_TXQ_STATS_INVALID: attribute number 0 is reserved
3522 * @NL80211_TXQ_STATS_MAX: highest numbered attribute here
3563 * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting
3566 * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
3577 * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
3601 * @__NL80211_BAND_IFTYPE_ATTR_INVALID: attribute number 0 is reserved
3602 * @NL80211_BAND_IFTYPE_ATTR_IFTYPES: nested attribute containing a flag attribute
3612 * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently
3635 * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
3640 * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
3645 * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as
3648 * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using
3656 * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
3686 * @__NL80211_WMMR_INVALID: attribute number 0 is reserved
3708 * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
3735 * channel. A channel that has the INDOOR_ONLY attribute can only be
3744 * off-channel on a channel that has the IR_CONCURRENT attribute set can be
3750 * attribute for IR is disallowed for master interfaces (IBSS, AP).
3756 * This is a nested attribute that contains the wmm limitation per AC.
3771 * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
3822 * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved
3826 * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number
3888 * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
3907 * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
3931 * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
3937 * if this attribute is in a match set of its own, then it is treated as
3942 * attribute) is if there's only a single matchset with the RSSI attribute.
3948 * RSSI-based BSS selection. The attribute value is a packed structure
3952 * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the
3955 * band shall be encapsulated in attribute with type value equals to one
3958 * within an attribute of type NL80211_BAND_2GHZ. And one or more of such
3959 * attributes will be nested within this attribute.
3961 * attribute number currently defined
4054 * assumed if the attribute is not set.
4076 * These attribute types are used with %NL80211_ATTR_SURVEY_INFO
4079 * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
4095 * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment
4098 * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
4274 * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
4398 * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
4420 * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
4430 * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
4501 * attribute.
4506 * attribute must be provided as well
4508 * attribute must be provided as well
4512 * attribute must be provided as well
4540 * These values are used with the %NL80211_BSS_CHAN_WIDTH attribute.
4568 * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
4570 * if the %NL80211_BSS_BEACON_IES attribute is present and the data is
4575 * If present, the @NL80211_BSS_PRESP_DATA attribute indicates that the
4583 * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information
4591 * @NL80211_BSS_TSF is known to be from a probe response (flag attribute)
4595 * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment
4607 * @NL80211_BSS_MAX: highest BSS attribute
4646 * The BSS status is a BSS attribute in scan dumps, which
4670 * the attribute for this on CONNECT commands.
4754 * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
4762 * @NL80211_KEY_MAX: highest key attribute
4799 * @NL80211_TXRATE_MAX: highest TX rate attribute
4898 * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon
4903 * @NL80211_ATTR_CQM_MAX: highest key attribute
4971 * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values
4989 * the max value is advertised by the driver in this attribute on
4994 * the max value is advertised by the driver in this attribute on
5005 * @NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE: This attribute will be useful
5036 * enum nl80211_packet_pattern_attr - packet pattern attribute
5037 * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute
5054 * @MAX_NL80211_PKTPAT: max attribute number
5108 * which are passed in an array of nested attributes, each nested attribute
5115 * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
5118 * When reporting wakeup. it is a u32 attribute containing the 0-based
5134 * attribute contains the original length.
5137 * attribute if the packet was truncated somewhere.
5140 * be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute
5144 * attribute if the packet was truncated somewhere.
5146 * "TCP connection wakeup" for more details. This is a nested attribute
5157 * is detected. This is a nested attribute that contains the
5162 * attribute is also sent in a response to
5165 * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute
5171 * Each element in the array is a nested attribute that contains
5172 * one optional %NL80211_ATTR_SSID attribute and one optional
5173 * %NL80211_ATTR_SCAN_FREQUENCIES attribute. At least one of
5179 * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
5284 * For feature advertising, a u32 attribute holding the maximum length
5295 * u32 attribute holding the maximum length
5300 * @MAX_NL80211_WOWLAN_TCP: highest attribute number
5337 * enum nl80211_attr_coalesce_rule - coalesce rule attribute
5338 * @__NL80211_COALESCE_RULE_INVALID: invalid number for nested attribute
5345 * @NL80211_ATTR_COALESCE_RULE_MAX: max attribute number
5375 * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a
5376 * flag attribute for each interface type in this set
5378 * @MAX_NL80211_IFACE_LIMIT: highest attribute number
5396 * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of
5399 * in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE.
5400 * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that
5404 * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
5406 * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap
5408 * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap
5410 * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of
5414 * @MAX_NL80211_IFACE_COMB: highest attribute number
5430 * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
5518 * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
5549 * @__NL80211_STA_WME_INVALID: invalid number for nested attribute
5555 * @NL80211_STA_WME_MAX: highest station WME attribute
5576 * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute
5676 * estimation (dynack). %NL80211_ATTR_WIPHY_DYN_ACK flag attribute is used
5753 * %NL80211_ATTR_MU_MIMO_GROUP_DATA attribute,
5755 * %NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR attribute.
5782 * %NL80211_ATTR_CQM_RSSI_THOLD attribute accepts a list of zero or more
5794 * the max channel attribute in the FILS request params IE with the
5968 * To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute.
6026 * as AP and the beaconing has already been configured. This attribute is
6181 * wiphy dumps (if requested by the application with the attribute
6265 * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved
6269 * scan plan (u32). The last scan plan must not specify this attribute
6272 * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number
6305 * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS
6309 * this attribute is according to &enum nl80211_band (u32).
6312 * RSSI-based BSS selection. The attribute value is a packed structure
6314 * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number.
6388 * specified in NAN spec. This is a binary attribute.
6403 * follow up Service Discovery Frame. This is a binary attribute.
6410 * specific info. This is a binary attribute.
6411 * @NL80211_NAN_FUNC_SRF: Service Receive Filter. This is a nested attribute.
6414 * attribute. It is a list of binary values.
6416 * nested attribute. It is a list of binary values.
6423 * @NL80211_NAN_FUNC_ATTR_MAX: highest NAN function attribute
6455 * %NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary.
6460 * attribute. Each nested attribute is a MAC address.
6462 * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute
6480 * match. This is a nested attribute.
6483 * that caused the match. This is a nested attribute.
6487 * @NL80211_NAN_MATCH_ATTR_MAX: highest NAN match attribute
6522 * @NL80211_FTM_RESP_ATTR_MAX: highest FTM responder attribute.
6539 * These attribute types are used with %NL80211_ATTR_FTM_RESPONDER_STATS
6542 * @__NL80211_FTM_STATS_INVALID: attribute number 0 is reserved
6562 * @NL80211_FTM_STATS_MAX: highest possible FTM responder stats attribute
6636 * @NL80211_PMSR_REQ_ATTR_DATA: This is a nested attribute with measurement
6640 * (flag attribute)
6643 * @NL80211_PMSR_REQ_ATTR_MAX: highest attribute number
6660 * @NL80211_PMSR_RESP_ATTR_DATA: This is a nested attribute with measurement
6679 * @NL80211_PMSR_RESP_ATTR_MAX: highest attribute number
6703 * @NL80211_PMSR_PEER_ATTR_REQ: This is a nested attribute indexed by
6706 * @NL80211_PMSR_PEER_ATTR_RESP: This is a nested attribute indexed by
6711 * @NL80211_PMSR_PEER_ATTR_MAX: highest attribute number
6730 * @NL80211_PMSR_ATTR_MAX_PEERS: u32 attribute used for capability
6733 * @NL80211_PMSR_ATTR_REPORT_AP_TSF: flag attribute in capability
6736 * @NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR: flag attribute in capability
6742 * @NL80211_PMSR_ATTR_PEERS: nested attribute, the nesting index is
6748 * @NL80211_PMSR_ATTR_MAX: highest attribute number
6768 * @NL80211_PMSR_FTM_CAPA_ATTR_ASAP: flag attribute indicating ASAP mode
6770 * @NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP: flag attribute indicating non-ASAP
6772 * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI: flag attribute indicating if LCI
6774 * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC: flag attribute indicating if civic
6776 * @NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES: u32 bitmap attribute of bits
6783 * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT: u32 attribute indicating
6786 * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating
6788 * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if
6790 * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating
6794 * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number
6840 * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED are
6847 * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are
6854 * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
6956 * @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number
7003 * @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute.
7029 * @NL80211_HE_BSS_COLOR_ATTR_MAX: highest BSS Color attribute.
7047 * @NL80211_IFTYPE_AKM_ATTR_IFTYPES: nested attribute containing a flag
7048 * attribute for each interface type that supports AKM suites specified in
7054 * @NL80211_IFTYPE_AKM_ATTR_MAX: highest interface type AKM attribute.
7081 * @NL80211_FILS_DISCOVERY_ATTR_MAX: highest attribute
7114 * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX: highest attribute