Lines Matching refs:AP

31   addition of new devices); this may be either in the AP ("internal
36 It should also be noted that the AP and a client device may change
37 roles (i.e., AP acts as an Enrollee and client device as a Registrar)
50 configure an AP.
119 AP to access the network.
132 When the wps_pin command is issued for an AP (including P2P GO) mode
147 a button is also pressed at the AP/Registrar at about the same time (2
153 At this point, the AP/Registrar has two minutes to complete WPS
159 current AP configuration and optionally, to configure an AP,
163 wpa_cli wps_reg <AP BSSID> <AP PIN>
166 This is used to fetch the current AP settings instead of actually
168 wps_reg uses the AP PIN (e.g., from a label on the AP) instead of a
171 In order to change the AP configuration, the new configuration
174 wpa_cli wps_reg <AP BSSID> <AP PIN> <new SSID> <auth> <encr> <new key>
188 the AP support WPS, but has not recently activated a Registrar, [WPS]
193 monitor events WPS-AP-AVAILABLE{,-PBC,-PIN} can be used to find out if
204 WPS tab that guides user through WPS registration with automatic AP
206 selecting an AP from scan results.
231 wpa_supplicant can be used as a WPS ER to configure an AP or enroll
233 requires that a working IP connectivity is available with the AP (this
254   to include a single AP
261 wps_er_learn <UUID|BSSID> <AP PIN>
262 - learn AP configuration
265 - use AP configuration from a locally configured network (e.g., from
266   wps_reg command); this does not change the AP's configuration, but
268   to the AP
270 wps_er_config <UUID|BSSID> <AP PIN> <new SSID> <auth> <encr> <new key>
286   to allow the AP to advertise list of authorized enrollees
292 - WPS ER discovered an AP
294 WPS-ER-AP-ADD 87654321-9abc-def0-1234-56789abc0002 02:11:22:33:44:55 pri_dev_type=6-0050F204-1 wps_…
297 - WPS ER removed an AP entry
299 WPS-ER-AP-REMOVE 87654321-9abc-def0-1234-56789abc0002
311 WPS-ER-AP-SETTINGS
312 - WPS ER learned AP settings
314 WPS-ER-AP-SETTINGS uuid=fd91b4ec-e3fa-5891-a57d-8c59efeed1d2 ssid=test-wps auth_type=0x0020 encr_ty…
323 with a configuration token can be used to transfer AP settings without
339 NFC configuration token when wpa_supplicant is controlling an AP
340 interface (AP or P2P GO). The output value from this command is a
341 hexdump of the current AP configuration (WPS parameter requests this to
363 an AP) using a special value "nfc-pw" in place of the PIN parameter. If
381 message for the specified AP when wpa_supplicant is operating as a WPS
392 used to build an NFC configuration token for the specified AP when
394 command is a hexdump of the selected AP configuration (WPS parameter