The PulseAudio sound server reads configuration directives from
a configuration file on startup. If the per-user file
~/.config/pulse/daemon.conf exists, it is used, otherwise the
system configuration file @PA_DEFAULT_CONFIG_DIR@/daemon.conf
is used. In addition to those main files, configuration directives can also
be put in files under directories
~/.config/pulse/daemon.conf.d/ and
@PA_DEFAULT_CONFIG_DIR@/daemon.conf.d/ . Those files have to
have the .conf file name extension, but otherwise the file names can be
chosen freely. The files under daemon.conf.d are processed in alphabetical
order. In case the same option is set in multiple files, the last file to
set an option overrides earlier files. The main daemon.conf file is
processed first, so options set in files under daemon.conf.d override the
main file.
Please note that the server also reads a configuration script on
startup. See
The configuration file is a simple collection of variable
declarations. If the configuration file parser encounters either ;
or # it ignores the rest of the line until its end.
For the settings that take a boolean argument the values
true , yes , on and 1
are equivalent, resp. false , no ,
off , 0 .
daemonize= Daemonize after startup. Takes a
boolean value, defaults to no . The --daemonize
command line option takes precedence.
fail= Fail to start up if any of the directives
in the configuration script default.pa
fail. Takes a boolean argument, defaults to yes . The --fail command line
option takes precedence.
allow-module-loading= Allow/disallow module
loading after startup. This is a security feature that if
disabled makes sure that no further modules may be loaded into
the PulseAudio server after startup completed. It is recommended
to disable this when system-instance is
enabled. Please note that certain features like automatic
hot-plug support will not work if this option is enabled. Takes
a boolean argument, defaults to yes . The
--disallow-module-loading command line option takes
precedence.
allow-exit= Allow/disallow exit on user
request. Defaults to yes .
resample-method= The resampling algorithm to
use. Use one of src-sinc-best-quality ,
src-sinc-medium-quality , src-sinc-fastest ,
src-zero-order-hold , src-linear ,
trivial , speex-float-N ,
speex-fixed-N , ffmpeg , soxr-mq ,
soxr-hq , soxr-vhq . See the
documentation of libsamplerate and speex for explanations of the
different src- and speex- methods, respectively. The method
trivial is the most basic algorithm implemented. If
you're tight on CPU consider using this. On the other hand it has
the worst quality of them all. The Speex resamplers take an
integer quality setting in the range 0..10 (bad...good). They
exist in two flavours: fixed and float . The former uses fixed point
numbers, the latter relies on floating point numbers. On most
desktop CPUs the float point resampler is a lot faster, and it
also offers slightly better quality. The soxr-family methods
are based on libsoxr, a resampler library from the SoX sound processing utility.
The mq variant has the best performance of the three. The hq is more expensive
and, according to SoX developers, is considered the best choice for audio of up to 16 bits per sample.
The vhq variant has more precision than hq and is more suitable for larger samples. The Soxr resamplers
generally offer better quality at less CPU compared to other resamplers, such as speex.
The downside is that they can add a significant delay to the output
(usually up to around 20 ms, in rare cases more).
See the output of dump-resample-methods for a complete list of all
available resamplers. Defaults to speex-float-1 . The
--resample-method command line option takes precedence.
Note that some modules overwrite or allow overwriting of the
resampler to use.
avoid-resampling= If set, try to configure the
device to avoid resampling. This only works on devices which
support reconfiguring their rate, and when no other streams are
already playing or capturing audio. The device will also not be
configured to a rate less than the default and alternate sample
rates.
enable-remixing= If disabled never upmix or
downmix channels to different channel maps. Instead, do a simple
name-based matching only. Defaults to yes .
There is no known valid use case for setting this option to
no , therefore, this option is deprecated and may be
removed in a future version of PulseAudio.
remixing-use-all-sink-channels= If enabled, use
all sink channels when remixing. Otherwise, remix to the minimal
set of sink channels needed to reproduce all of the source
channels. (This has no effect on LFE remixing.) Defaults to
yes .
enable-lfe-remixing= This is a way to set
remixing-produce-lfe and remixing-consume-lfe
to the same value at once. This option only exists for backward
compatibility and may be removed in a future version of PulseAudio.
remixing-produce-lfe= If enabled, and the sink input
does not have the LFE channel, synthesize the output LFE channel
as a (lowpass-filtered, if lfe-crossover-freq is not 0)
average of all input channels. Also, when lfe-crossover-freq
is not 0, filter out low frequencies from other channels while
producing a synthetic LFE output. If disabled, the output LFE channel
will only get a signal when an input LFE channel is available as well.
Defaults to no .
remixing-consume-lfe= If enabled, and the sink does not
have an LFE channel, redirect the input LFE channel (if any) to other
channels. If disabled, the input LFE channel will remain unused unless
the sink has the LFE channel as well. Defaults to no .
lfe-crossover-freq= The crossover frequency (in Hz) for the
LFE filter. Set it to 0 to disable the LFE filter. Defaults to 0.
use-pid-file= Create a PID file in the runtime directory
($XDG_RUNTIME_DIR/pulse/pid ). If this is enabled you may
use commands like --kill or --check . If
you are planning to start more than one PulseAudio process per
user, you better disable this option since it effectively
disables multiple instances. Takes a boolean argument, defaults
to yes . The --use-pid-file command line
option takes precedence.
cpu-limit= If disabled do not install the CPU load
limiter, even on platforms where it is supported. This option is
useful when debugging/profiling PulseAudio to disable disturbing
SIGXCPU signals. Takes a boolean argument, defaults to
no . The --no-cpu-limit command line
argument takes precedence.
system-instance= Run the daemon as system-wide
instance, requires root privileges. Takes a boolean argument,
defaults to no . The --system command line
argument takes precedence.
local-server-type= Please don't use this option if
you don't have to! This option is currently only useful when you
want D-Bus clients to use a remote server. This option may be
removed in future versions. If you only want to run PulseAudio
in the system mode, use the system-instance option.
This option takes one of user , system or
none as the argument. This is essentially a duplicate
for the system-instance option. The difference is the
none option, which is useful when you want to use a
remote server with D-Bus clients. If both this and
system-instance are defined, this option takes
precedence. Defaults to whatever the system-instance
is set.
enable-shm= Enable data transfer via POSIX
or memfd shared memory. Takes a boolean argument, defaults to
yes . The --disable-shm command line
argument takes precedence.
enable-memfd= . Enable memfd shared memory. Takes
a boolean argument, defaults to yes .
shm-size-bytes= Sets the shared memory segment
size for the daemon, in bytes. If left unspecified or is set to 0
it will default to some system-specific default, usually 64
MiB. Please note that usually there is no need to change this
value, unless you are running an OS kernel that does not do
memory overcommit.
lock-memory= Locks the entire PulseAudio process
into memory. While this might increase drop-out safety when used
in conjunction with real-time scheduling this takes away a lot
of memory from other processes and might hence considerably slow
down your system. Defaults to no .
flat-volumes= Enable 'flat' volumes, i.e. where
possible let the sink volume equal the maximum of the volumes of
the inputs connected to it. Takes a boolean argument, defaults
to no .
rescue-streams= Enable rescuing of streams if the
used sink or source becomes unavailable. Takes a boolean argument.
If set to yes , pulseaudio will try to move the streams
from a sink or source that becomes unavailable to the default sink
or source. If set to no , streams will be killed if the
corresponding sink or source disappears. Defaults to yes .
high-priority= Renice the daemon after startup to
become a high-priority process. This a good idea if you
experience drop-outs during playback. However, this is a certain
security issue, since it works when called SUID root only, or
RLIMIT_NICE is used. root is dropped immediately after gaining
the nice level on startup, thus it is presumably safe. See
yes . The --high-priority
command line option takes precedence.
realtime-scheduling= Try to acquire SCHED_FIFO
scheduling for the IO threads. The same security concerns as
mentioned above apply. However, if PA enters an endless loop,
realtime scheduling causes a system lockup. Thus, realtime
scheduling should only be enabled on trusted machines for
now. Please note that only the IO threads of PulseAudio are made
real-time. The controlling thread is left a normally scheduled
thread. Thus enabling the high-priority option is orthogonal.
See yes . The
--realtime command line option takes precedence.
realtime-priority= The realtime priority to
acquire, if realtime-scheduling is enabled. Note: JACK uses 10
by default, 9 for clients. Thus it is recommended to choose the
PulseAudio real-time priorities lower. Some PulseAudio threads
might choose a priority a little lower or higher than the
specified value. Defaults to 5 .
nice-level= The nice level to acquire for the
daemon, if high-priority is enabled. Note: on some
distributions X11 uses -10 by default. Defaults to -11.
log-target= The default log target. Use either
stderr , syslog , journal (optional),
auto , file:PATH or newfile:PATH . On traditional
systems auto is equivalent to syslog . On systemd-enabled
systems, auto is equivalent to journal , in case daemonize
is enabled, and to stderr otherwise. If set to file:PATH ,
logging is directed to the file indicated by PATH. newfile:PATH is
otherwise the same as file:PATH , but existing files are never
overwritten. If the specified file already exists, a suffix is added to
the file name to avoid overwriting. Defaults to auto . The
--log-target command line option takes precedence.
log-level= Log level, one of debug ,
info , notice , warning ,
error . Log messages with a lower log level than
specified here are not logged. Defaults to
notice . The --log-level command line
option takes precedence. The -v command line option
might alter this setting.
log-meta= With each logged message log the code
location the message was generated from. Defaults to
no .
log-time= With each logged message log the
relative time since startup. Defaults to no .
log-backtrace= When greater than 0, with each
logged message log a code stack trace up the specified
number of stack frames. Defaults to 0 .
See
rlimit-as Defaults to -1.
rlimit-rss Defaults to -1.
rlimit-core Defaults to -1.
rlimit-data Defaults to -1.
rlimit-fsize Defaults to -1.
rlimit-nofile Defaults to 256.
rlimit-stack Defaults to -1.
rlimit-nproc Defaults to -1.
rlimit-locks Defaults to -1.
rlimit-sigpending Defaults to -1.
rlimit-msgqueue Defaults to -1.
rlimit-memlock Defaults to 16 KiB. Please note
that the JACK client libraries may require more locked
memory.
rlimit-nice Defaults to 31. Please make sure that
the default nice level as configured with nice-level
fits in this resource limit, if high-priority is
enabled.
rlimit-rtprio Defaults to 9. Please make sure that
the default real-time priority level as configured with
realtime-priority= fits in this resource limit, if
realtime-scheduling is enabled. The JACK client
libraries require a real-time priority of 9 by default.
rlimit-rttime Defaults to 1000000.