Lines Matching +full:logicvc +full:- +full:3
1 # SPDX-License-Identifier: GPL-2.0-only
57 non-sleeping contexts. They can make bitbanged serial protocols
115 tristate "GPIO driver for 74xx-ICs with MMIO access"
119 Say yes here to support GPIO functionality for 74xx-compatible ICs
135 If driver is built as a module it will be called gpio-altera.
171 tristate "Raspberry Pi 3 GPIO Expander"
178 Turn on GPIO support for the expander on Raspberry Pi 3 boards, using
285 tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
288 Say yes here to support basic platform_device memory-mapped GPIO controllers.
316 ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8
334 depends on ARM # For <asm/mach-types.h>
345 tristate "Xylon LogiCVC GPIO support"
348 Say yes here to support GPIO functionality of the Xylon LogiCVC
352 bool "Loongson-2/3 GPIO support"
355 driver for GPIO functionality on Loongson-2F/3A/3B processors.
442 Say yes here to support the on-chip GPIO lines on the OCTEON
477 tristate "Renesas R-Car GPIO"
481 Say yes here to support GPIO on Renesas R-Car SoCs.
495 A 32-bit single register GPIO fixed in/out implementation. This
508 maintain their value during backup/self-refresh.
526 via a SIOX bus and have a number of fixed-direction I/O lines.
534 This is a single-register MMIO GPIO driver for complex cases
603 tristate "TS-4800 DIO blocks and compatibles"
608 This driver support TS-4800 FPGA GPIO controllers.
611 tristate "Cavium ThunderX/OCTEON-TX GPIO"
618 Say yes here to support the on-chip GPIO lines on the ThunderX
619 and OCTEON-TX families of SoCs.
637 tristate "NEC VR4100 series General-purpose I/O Uint support"
640 Say yes here to support the NEC VR4100 series General-purpose I/O Uint
662 bool "APM X-Gene GPIO controller support"
665 This driver is to support the GPIO block within the APM X-Gene SoC
671 tristate "APM X-Gene GPIO standby controller support"
677 This driver supports the GPIO block within the APM X-Gene
734 tristate "GPIO support for AMD Fusion Controller Hub (G-series SOCs)"
737 as found on G-series SOCs (eg. GX-412TC)
744 menu "Port-mapped I/O GPIO drivers"
748 tristate "ACCES 104-DIO-48E GPIO support"
753 Enables GPIO support for the ACCES 104-DIO-48E series (104-DIO-48E,
754 104-DIO-24E). The base port addresses for the devices may be
759 tristate "ACCES 104-IDIO-16 GPIO support"
764 Enables GPIO support for the ACCES 104-IDIO-16 family (104-IDIO-16,
765 104-IDIO-16E, 104-IDO-16, 104-IDIO-8, 104-IDIO-8E, 104-IDO-8). The
771 tristate "ACCES 104-IDI-48 GPIO support"
776 Enables GPIO support for the ACCES 104-IDI-48 family (104-IDI-48A,
777 104-IDI-48AC, 104-IDI-48B, 104-IDI-48BC). The base port addresses for
785 This option enables support for GPIOs found on Fintek Super-I/O
789 be called f7188x-gpio.
792 tristate "Diamond Systems GPIO-MM GPIO support"
796 Enables GPIO support for the Diamond Systems GPIO-MM and GPIO-MM-12.
798 The Diamond Systems GPIO-MM device features 48 lines of digital I/O
832 system from the Suspend-to-RAM state.
838 Twenty-one are powered by the core power rail and 9 from the
851 be called gpio-sch311x.
854 tristate "TS-5500 DIO blocks and compatibles"
858 Technologic Systems platforms. It includes, but is not limited to, 3
859 blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
872 boot-time parameter "gpio_winbond.gpios" with a bitmask of GPIO
876 be called gpio-winbond.
908 tristate "Avionic Design N-bit GPIO expander"
924 Expander. This is used at least on the Cambria GW2358-4.
930 GPIO driver for Maxim MAX7300 I2C-based GPIO expander.
933 tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
935 Say yes here to support the MAX7319, MAX7320-7327 series of I2C
937 Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain
959 bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions"
968 Say yes here to provide access to several register-oriented
993 tristate "PCA9570 4-Bit I2C GPO expander"
998 be called gpio-pca9570.
1005 Say yes here to provide access to most "quasi-bidirectional" I2C
1022 This driver provides an in-kernel interface to those GPIOs using
1023 platform-neutral GPIO calls.
1026 tristate "TPIC2810 8-Bit I2C GPO expander"
1031 be called gpio-tpic2810.
1039 Series supported include TS-4100, TS-4900, TS-7970 and TS-7990.
1049 This option enables support for on-chip GPIO found
1075 will be called gpio-bd70528.
1087 will be called gpio-bd71828.
1098 will be called gpio-bd9571mwv.
1111 called gpio-crystalcove.
1136 The Dialog DA9055 PMIC chip has 3 GPIO pins that can be
1139 If driver is built as a module it will be called gpio-da9055.
1151 will be called gpio-dln2.
1162 tristate "Janz VMOD-TTL Digital IO Module"
1165 This enables support for the Janz VMOD-TTL Digital IO module.
1177 called gpio-kempld.
1195 called gpio-lp873x.
1201 This driver supports the GPIO on TI Lp873565 PMICs. 3 GPIOs are present
1205 called gpio-lp87565.
1263 called gpio-sl28cpld.
1338 tristate "TQ-Systems QTMX86 GPIO"
1349 Say yes here to access the GPIO signals of various multi-function
1377 called gpio-wcove.
1425 This chip can be found on Miro, Hauppauge and STB TV-cards.
1430 Documentation/driver-api/gpio/bt8xxgpio.rst
1469 Hub) which is for IVI(In-Vehicle Infotainment) use.
1489 tristate "ACCES PCI-IDIO-16 GPIO support"
1492 Enables GPIO support for the ACCES PCI-IDIO-16. An interrupt is
1498 tristate "ACCES PCIe-IDIO-24 GPIO support"
1501 Enables GPIO support for the ACCES PCIe-IDIO-24 family (PCIe-IDIO-24,
1502 PCIe-IDI-24, PCIe-IDO-24, PCIe-IDIO-12). An interrupt is generated
1508 tristate "RDC R-321x GPIO support"
1529 tristate "74x164 serial-in/parallel-out 8-bits shift register"
1532 Driver for 74x164 compatible serial-in/parallel-out 8-outputs
1541 MAX31953 and MAX31963 industrial serializer, a daisy-chainable
1550 GPIO driver for Maxim MAX7301 SPI-based GPIO expander.
1553 tristate "Freescale MC33880 high-side/low-side switch"
1555 SPI driver for Freescale MC33880 high-side/low-side switch.
1559 tristate "Generic parallel-in/serial-out shift register"
1561 GPIO driver for SPI compatible parallel-in/serial-out shift
1565 tristate "EXAR XRA1403 16-bit GPIO expander"
1568 GPIO driver for EXAR XRA1403 16-bit SPI-based GPIO expander.
1603 - Assign permissions for a collection of GPIO lines to a user,
1604 - Export a collection of GPIO lines to a virtual machine,
1605 - Provide a generic driver for a GPIO-operated device in an
1617 tools/testing/selftests/gpio/gpio-mockup.sh. Reference the usage in