Lines Matching +full:ipv4 +full:- +full:no +full:- +full:config +full:- +full:for +full:- +full:cpp
4 This file contains are the release notes for the NuttX (and apps) packages
5 for every release. The text is just as was written at the time of release
12 repository, a GIT lightweight tag has been applied for each release. The
13 tag name is the release name (for example, the release 6.27 has tag name
14 "nuttx-6.27").
16 NuttX-0.1.0
17 -----------
20 with support for the Linux user mode simulation and the TI TMS320C5471
21 (Arm7) processor. Partial support for the 87C52 is included.
23 This release has been verified on both the Linux user-mode and C5471
25 for the C5471 can be found in arch/c5471/doc/test-results.txt.
29 NuttX-0.1.1
30 -----------
33 See the ChangeLog for more detailed description of the changes.
35 (1) General OS bugfixes (see the ChangeLog for details),
36 (2) bugfixes for the TI TMS320C5471 (Arm7) platform (see
38 (3) Complete support for the 87C52. (However, the 87C52
39 release is not stable enough for general usage).
42 This release has been verified on the Linux user-mode platform, the
51 NuttX-0.1.2
52 -----------
56 the ChangeLog for a more detailed description of the
66 This release has been verified on the Linux user-mode
72 NuttX-0.2.1
73 -----------
76 support for a new platform, restructures many header files,
79 (1) Support for Neuros OSD / DM320
80 (2) Restructuring of header files for better POSIX compliance
85 This release has been verified on the Linux user-mode
93 NuttX-0.2.2
94 ------------
96 This is the fifth release of NuttX. There is no major new
98 for new pthread barrier APIs, changes the directory
103 See the ChangeLog for a complete list of changes.
105 This release has been verified on the Linux user-mode
107 examples/ostest. There are no known, critical defects but
114 NuttX-0.2.3
115 ------------
120 support for timed message queues.
122 See the ChangeLog for a complete list of changes.
124 This release has been verified on the Linux user-mode
127 the source tree under configs/ntosd-dm320/doc/test-results.
128 There are no known, critical defects but the project
135 NuttX-0.2.4
136 ------------
142 in preparation for an LPC2148 port that is currently in progress. There
143 is NO new functionality or significant bugfixes in this release.
145 See the ChangeLog for a complete list of changes.
147 This release has been verified on the Linux user-mode platform
150 configs/ntosd-dm320/doc/test-results and under configs/sim/doc/test-results.
151 There are no known, critical defects but the project development status
156 NuttX-0.2.5
157 ------------
162 (2) Initial support for FAT filesystems. Testing has not
166 (3) Support for the NXP lpc2148 processor is included but
168 implementation includes only support for serial console
171 See the ChangeLog for a complete list of changes.
173 This release has been verified only on the Linux user-mode
179 NuttX-0.2.6
180 -----------
191 See the ChangeLog for a complete list of changes.
193 This release has been verified only on the Linux user-mode platform.
197 NuttX-0.2.7
198 -----------
203 FAT filesystem logic including stat(), statfs(), and non-standard
207 See the ChangeLog for a complete list of changes.
209 This release has been verified only on the Linux user-mode platform.
213 NuttX-0.2.8
214 -----------
218 (2) adds support for environment variables
222 See the ChangeLog for a complete list of changes.
224 This release has been verified only on the Linux user-mode platform.
228 NuttX-0.3.0
229 -----------
234 is a device driver for the Davicom DM90x0 Ethernet controller.
238 open issues (see the TODO file). The network subsystem is pre-alpha
243 post-beta (as long as the network is not used).
245 See the ChangeLog for a complete list of changes.
252 NuttX-0.3.1
253 -----------
259 Many network-related problems have been fixed and the implementation
261 is probably still at the pre-alpha or early level. It is sufficiently
267 post-beta (as long as the network is not used).
269 See the ChangeLog for a complete list of changes.
276 NuttX-0.3.2
277 -----------
283 Many network-related problems have been fixed and the implementation
286 o TCP-related bug-fixes
291 See the ChangeLog for a complete list of changes.
297 post-beta.
304 NuttX-0.3.3
305 -----------
311 Many network-related problems have been fixed and the implementation
314 o TCP-related bug-fixes for disconnecting sockets
315 o Correction of some TCP read-ahead logic
317 o Misc. additions and cleanup (See the ChangeLog for a complete list of
322 post-beta. Open network-related issues include only:
331 platform using the DM90x0 driver. Any feedback for improving the network
336 NuttX-0.3.4
337 -----------
343 This release is primarily a bug-fix release. New features include
346 o TELNET front-end to NSH,
356 post-beta or production level.
361 or suggestions for improving the network reliability/performance would be
366 NuttX-0.3.5
367 -----------
369 This is the 17th release of NuttX this release is primarily a bug-fix
371 the ChangeLog for a detailed list of changes and fixes.
374 the C5471 Ethernet driver. Any feedback about bugs or suggestions for
379 NuttX-0.3.6
380 -----------
384 the release of the pascal-0.1.0 add-on package.
388 * Fixes for use with SDCC compiler
390 * Fix deadlock errors when using stdio but with no buffering
391 * Add support for the add-on Pascal P-Code interpreter (pcode/)
392 (see the pascal-0.1.0 package)
396 for improvement would be greatly appreciated.
403 a successful build unless the Pascal add-on was present. The
405 the nuttx-0.3.6.1.tar.gz version to avoid this problem.
407 NuttX-0.3.7
408 -----------
411 preliminary port of NuttX to the ZiLOG z16f 16-bit microcontroller.
413 and the ZiLOG ZDS-II toolchain. See http://www.zilog.com for
417 is only alpha or, perhaps, pre-alpha quality as of this writing.
428 found and corrected in NuttX: The thread-specific errno value of one
433 or suggestions for improvement would be greatly appreciated.
437 NuttX-0.3.8
438 -----------
442 continues the integration of the ZiLOG Z18F and of the Pascal P-Code
443 add-on. This release is synchronized with the release of Pascal-0.1.2.
447 NuttX-0.3.9
448 -----------
451 release. This release includes support for the ZiLOG Z8Encore! micro-
452 controller. Also included is the initial framework for support for
453 the Z80, XTRS platform (http://www.tim-mann.org/xtrs.html).
455 This released has been verified only on the ZiLOG ZDS-II Z8Encore!
460 NuttX-0.3.10
461 ------------
468 chip) and configurations for the ZiLOG z8f64200100kit (Z8F6423) and
471 NuttX-0.3.11
472 ------------
483 * Support for recursive mutexes
485 * The host simulator no longer uses direct Linux system calls and
494 NuttX-0.3.12
495 ------------
516 NuttX-0.3.13
517 ------------
523 * Fixed problems with Cygwin-based console input. NSH now works
526 * Corrected detection of End-of-File in fgets()
529 * Corrected an error in the FAT that caused files opened for writing
535 * uIP port now supports multi-threaded, concurrent socket access.
536 So, for example, one thread can be reading from a socket while
543 - New commands: mkfatfs, mkfifo, sleep, usleep, nice, sh, cd, and pwd
544 - New memory inspection commands and heap usage commands
545 - New capabilities:
546 - Execution of commands in background
547 - Execution of simple scripts
548 - Redirection of command output
549 - Last command status ($?)
550 - Now supports if-then[-else]-fi construct
551 - Other features as noted in the ChangeLog.
559 nutt-0.3.14
560 -----------
577 * Corrected an error in multi-threaded socket handling in send() and
585 * Added support for application access to ICMP protocol stacks
591 See the new NuttShell User Guide for additional information.
594 features were were added. See the ChangeLog for details.
601 nutt-0.3.15
602 -----------
606 * Adds support for the ROMFS filesystem
608 * NuttShell (NSH) can be configured to use ROMFS to provide a tiny read-only
620 nutt-0.3.16
621 -----------
624 support for USB in NuttX. A set of USB APIs were added to support
628 At present USB device controller drivers are included for:
631 * TI DM320. Coding for this driver is complete but it is completely
634 A controller-independent class driver is also included for:
636 serial-to-USB adapter). This driver has only been verified with
640 * Add an option to set aside a separate stack for interrupt
647 (off by 20x in nuttx-0.3.15)
659 ------
660 This release does not build for the ARM target when USB is disabled.
667 diff -u -r1.13 up_internal.h
668 --- arch/arm/src/common/up_internal.h 6 Oct 2008 16:20:52 -0000 1.13
669 +++ arch/arm/src/common/up_internal.h 13 Oct 2008 20:48:21 -0000
670 @@ -200,7 +200,8 @@
674 -# define up_netinitialize()
681 NuttX-0.3.17
682 ------------
685 additional support for USB in NuttX. The following new features
688 * Added support for SPI-based MMC/SD cards (with an SPI driver
689 for the NXP LPC214x).
702 for details.)
711 NuttX-0.3.18
712 ------------
718 * The STMicro STR71x processor and configuration for the Olimex
719 STR-P711 board.
720 * The Hitachi SH-1 using the SH1_LCEVB1 (SH-1/US7032EVB1) board
745 1 - The sectors-per-cluster value was being reset to "1".
746 2 - Important lseek logic was omitted when the seek position was zero.
758 NuttX-0.3.19
759 ------------
764 * Add poll() and select() APIs that may be used to monitor for
767 select() to wake-up on new connections to a listener socket.
769 drivers for the simulated platform and the TI DM320 (untested
770 as of the initial check-in).
772 drivers, however, this will not be ready for use for a few more
775 is under development but not ready for check-in yet.
776 * Added support for fixed precision math.
777 * Added support for outgoing multicast packets.
782 TCP/IP read-ahead is enabled and not recv() is in-place when a
783 TCP/IP packet is received, the packet is placed into a read-ahead
784 buffer. However, the old contents of the read-ahead buffer
789 data as it is available rather than waiting for the full requested
798 NuttX-0.4.0
799 -----------
804 No other substantial changes were made.
813 added, Pascal P-code runtime support was added, FAT and ROMFS
820 NuttX-0.4.1
821 -----------
824 The primary reason for this release is to correct numerous build
825 errors that have accumulated for the ZiLOG ZDS-II based targets.
826 All ZDS-II targets now build correctly (but have not been re-tested).
827 In addition to platform-specific build failures, this release also
831 * Board support for the ZiLog ez80Acclaim! ez80f910200zco Development Kit
839 NuttX-0.4.2
840 -----------
842 This is the 34th release of NuttX. This release adds no new OS
843 features but does include support for two new architectures:
846 for the ez80f910200zcog-d board (eZ80F91-based). That basic
848 work includes an EMAC driver that should be integrated for the
849 next release nuttx-0.4.2. eZ80Acclaim! support has been in the
850 code base for some time, but has only just been integrated due
853 * Renesas M16C/20. Support for the Renesas SKP16C20 board has
858 These changes were verified only on the ZiLOG eZ80910200zcog-d
863 NuttX-0.4.3
864 -----------
870 to support priority inheritance. See the NuttX User Manual for
874 * ez80Acclaim! Corrected several critical, show-stopping bugs on that
876 - Errors in the serial driver interrupts.
877 - An error in the eZ80 table.
880 These changes were verified only on the ZiLOG eZ80910200zcog-d board
881 and on Cygwin-based simulation platform in various configurations.
886 NuttX-0.4.4
887 -----------
893 bind() behavior for port==0, the eZ80Acclaim! EMAC driver, Z80
899 See the Changelog for a detailed description of these changes.
901 These changes were verified only on the ZiLOG eZ80910200zcog-d board
902 using the ZDS-II toolchain in Cygwin-based environment. Please
907 NuttX-0.4.5
908 -----------
912 * The basic port for the Freescale ARM920T i.MX1 processor on the
913 Freescale MX1ADS board. Coding is complete for this port, but
916 * Add basic support for C++ applications. Very simple C++
922 See the Changelog for a detailed description of these changes.
926 NuttX-0.4.6
927 -----------
930 for the Micromint Eagle-100 development board. This board is based
931 around, the Luminary LM3S6918 MCU. This is the first ARM Cortex-M3
939 work has been set aside until I complete work on the Eagle-100 (I
943 definition in order to handle 9-bit interfaces to displays. Several
944 bugs were fixed (see the ChangeLog for a complete list of changes).
948 NuttX-0.4.7
949 -----------
952 up and extending the Eagle100/LM3S6918 port released in nuttx-0.4.6
955 * Improved reliably and additional drivers for the Eagle-100 board
956 (LM3S6918 ARM Cortex-M3). Additional drivers include Ethernet,
957 SSI, and support for the on-board LEDs and microSD cards.
959 * The SPI-based MMC/SD driver was extended to support SDHC Version
962 In addition, this release includes several important bugfixes for
963 the LM3S6918, the LPC2148, the SPI-based MMC/SD driver, and to
964 FAT32. See the ChangeLog for details of these bugfixes.
968 NuttX-0.4.8
969 -----------
973 * Support for the Olimex STRP711 board. That board is based on
984 * Support for the CodeSourcery and devkitARM Windows-native GNU
985 toolchains. Makefiles have been modified for the LM3S6918,
990 NuttX-0.4.9
991 -----------
995 * Support for a new binary format call NXFLAT that can be used to
1000 See the ChangeLog for a complete list.
1004 NuttX-0.4.10
1005 -----------
1011 related bug-fixes and functional additions for THTTPD were added:
1013 * Several new standard C-library functions (fileno, strstr,
1018 non-blocking sockets.
1021 * And miscellaneous bug fixes (see the ChangeLog for details).
1025 NuttX-0.4.11
1026 ------------
1031 THTTPD have been tested on the Micromint Eagle-100 development board
1032 (Cortex-M3). These tests verify:
1045 has provided a very good test bed for finding NuttX networking bugs.
1047 0.4.11 release (see the ChangeLog for details). Networking throughput
1053 NuttX-0.4.12
1054 ------------
1057 for the STMicro STM32, Cortex-M3 MCU. The specific port is to the
1058 STMicro STM3210E-EVAL development board based around the STM32F103ZET6
1061 * This basic port includes boot-up logic, interrupt driven serial
1064 perform basic STM32 board bring-up (due to RIDE7 size limitations,
1065 it cannot be used for the full NuttX bring-up).
1070 Functionality needed for complete STM32 support includes: USB
1077 NuttX-0.4.13
1078 ------------
1081 for the STMicro STM32 microcontroller. Minimal support for the
1082 STM3210E-EVAL development board based around the STM32F103ZET6 MCU
1083 was released in NuttX-0.4.12. This release adds:
1087 * Verified SPI operation using driver for SPI based FLASH parts
1089 * Improved Cortex-M3 context switching. This should improve
1091 * Added a USB device-side driver for the STM32. This is an early
1101 * Fixed and optimization-dependent race condition in the clock
1104 cause interrupt operations to failed used for interrupts in a
1109 NuttX-4.14
1110 ----------
1113 for the STMicro STM32 microcontroller. Minimal support for the
1114 STM3210E-EVAL development board based around the STM32F103ZET6 MCU
1115 was released in NuttX-0.4.12 and extended in NuttX-0.4.13 to include
1121 to provide read-ahead buffering and write buffering for improved
1127 * Implemented a an SDIO-based MMC/SD driver using this new SDIO
1134 * Added support for buttons on the STM3210E-EVAL board.
1142 * Fixed several STM32 DMA-related issues. Integrated and debugged
1144 * Fixed several bugs in the STM32 USB device-side driver.
1156 NuttX-5.0
1157 ---------
1159 This is 47th release of NuttX and the successor to nuttx-4.14. This
1166 If you have applications running on NuttX-4.14, those applications
1167 should continue to build and execute without problem on NuttX-5.0.
1168 However, if you have device drivers or other OS-internal logic, you
1172 * If you include sys/types.h to get the non-standard, fixed width
1173 integer types (uint32, uint16, ubyte, etc.), that is no longer
1179 uint32 -> uint32_t
1180 uint16 -> uint16_t
1181 ubyte -> uint8_t
1182 uint8 -> uint8_t
1183 sint32 -> int32_t
1184 sint16 -> int16_t
1185 sint8 -> int8_t
1187 * In addition, the non-standard type 'boolean' must replaced with
1188 the standard type 'bool'. The type definition for 'bool' is in
1193 correctly (other than the SDCC-based configurations). Regression
1209 partial ports for the STM32F107VC and HCS12 C9S12NE64 MCUs. Those
1214 NuttX-5.1
1215 ---------
1217 This is the 48th release of NuttX. This release adds support for
1222 This release adds support for the SAM3U-EK development board with
1228 NuttX-5.1 includes the basic port for the SAM3U-EK board. This
1230 OS implementation. It supports the basic boot-up, serial console
1234 The extended port will also include support for SDIO-based SD
1242 port for the NXP LPC3131 MCU on the Embedded Artists EA3131 board
1246 basic port will be available in NuttX-5.2.
1248 The extended release will follow and should include SDIO-based
1254 NuttX-5.2
1255 ---------
1258 verification of the basic port for the NXP LPC3131 MCU on the
1261 This basic port includes basic boot-up, serial console, and timer
1265 An extended release will follow and should include SDIO-based SD
1268 NuttX-5.3
1269 ---------
1271 This is the 50th release of NuttX. This release support for one new
1274 * A basic port for the NXP LPC2378 MCU on the Olimex-LPC2378
1279 * David Hewson contributed a dual-speed (full/high) USB device-side
1280 driver for the NXP LPC3131 on the Embedded Artists EA3131
1283 * A DMA driver and a high speed MCI driver for the Atmel AT91SAM3U
1292 NuttX-5.4
1293 ---------
1306 the LCD device via its serial or parallel interface. No in-memory
1311 extensions plus a driver for the HX8347, 16-bit parallel LCD. This
1312 LCD supports 16-bit RGB (5:6:5).
1314 NuttX-5.5
1315 ---------
1329 * A NuttX Ethernet driver for the Microchip ENC28J60 SPI Ethernet
1334 * The Olimex STR-P711 NuttX port was extended to support the
1336 The ENC28J60 has not been tested on the STR-P711, however,
1338 provides enough power for the ENC28J60 and I don't have the
1342 the STMicro STR-P711 port and some important bugs were fixed
1343 in the STR-P711 SPI driver.
1345 * Added (optional) floating point support for printf().
1352 NuttX-5.6
1353 ---------
1356 new drivers for existing NuttX ports:
1358 * This port adds support for the RiT displays P14201 4-bpp,
1359 greyscale OLED. 4-bpp greyscale support was integrated into
1360 the NX graphics sub-system and verified using the TI/Luminary
1363 * The M25Px driver was extended for the M24P1 FLASH part (see NOTE).
1365 * An I2C driver and (basic) SPI driver were added for the NXP
1370 As well as a few, important USB-related bugfixes (See the ChangeLog
1371 for details).
1373 This release also includes the beginnings of a port for the NXP
1374 LPC1768 MCU. However, it is too early for that port to be useful
1375 (stay tuned for a future announce of the availability of the LPC1768
1378 NuttX-5.7
1379 ---------
1382 for one new ARM Cortex-M3 architecture:
1384 * Added support for NXP LPC1768 MCU as provided on the Nucleus
1385 2G board from 2G Engineering (http://www.2g-eng.com).
1386 * Some initial files for the LPC17xx family were released in NuttX
1387 5.6, but the first functional release for the NXP LPC1768/Nucleus2G
1397 (2) SPI-based MMC/SD support
1400 Watch for announcement of the completed LPC1768 port expected in
1401 NuttX-5.8.
1403 NuttX-5.8
1404 ---------
1409 * Corrects some interrupt vectoring for the TI/Stellarix LM3S
1411 * Correct initialization logic for NXP LPC17xxx NuttX ports:
1421 been blocked for a variety of issues:
1423 * Added microSD support for the NuttShell (NSH) configuration in
1424 the Nucleus2G LPC1768 port. For reasons that have not yet been
1427 * Two USB configurations were also added for the Nucleus2G board:
1428 One to support the USB serial device and one for the USB mass
1430 but full verification is stalled for an OTG style USB cable.
1439 NuttX-5.9
1440 ---------
1443 categorize; NuttX-5.9 was really released because there were too
1444 many changes accumulating in CVS -- a few important, some unfinished
1448 of on-demand paging support. This feature will allow you to
1450 FLASH) in a small RAM. All of the core on-demand paging logic
1453 and support was implemented for the ARM-9 family. A test
1454 configuration is in place for the NXP LPC3131. It has been
1456 fixed-page ARM9 operation, but otherwise this new on-demand
1458 * Add support for the CodeSourcery toolchain to the Olimex-lpc2378
1459 port and for the Neuros OSD port.
1467 * NXP LPC17xx - Fixed a critical bug in the GPIO configuration
1468 logic: When attempting to set no pull-up or pull-down (floating),
1469 it would, instead, select pull-down.
1471 * TI/Luminary LM3Sxxxx - Fixed:
1481 NuttX-5.10
1482 ----------
1491 Header file changes and support for the Stellaris LM3S8962
1493 * On-Demand Paging Support:
1494 The basic logic for the On-Demand Paging feature is complete,
1495 implemented for the NXP LPC3131, and partially tested. See
1498 the verification. See configs/ea3131/README.txt for details.
1504 only used to support the On-Demand paging feature: The first
1506 the second pass builds the NuttX executable more-or-less as
1511 CONFIG_EXAMPLE. CONFIG_EXAMPLE used to identify the sub-directory
1518 For people who have their own configurations and/or Makefiles,
1521 - Replace all occurrences of CONFIG_EXAMPLE=foobar with
1524 - Replace any occurrences of examples/$(CONFIG_EXAMPLE) with
1526 - Replace any occurrences of lib$(CONFIG_EXAMPLE)$(LIBEXT)
1528 - Check any other occurrences of CONFIG_EXAMPLE.
1531 some warnings. See the ChangeLog for details.
1533 NuttX-5.11
1534 ----------
1540 particular race condition, a task could hang waiting for a
1550 * A driver for the Atmel AT45DB161D 4Mbit SPI FLASH part
1552 NuttX-5.12
1553 ----------
1558 Essentially, interrupts are re-enabled while the signal handler
1559 executes, but the logic to re-disable the interrupts before
1564 ARM to Cortex-M3, AVR32, M16C, SH1, ZNEO, eZ80, Z8, and Z80 --
1566 for all architectures but only verified on a few.
1568 Other notable changes in NuttX-5.12:
1570 * A complete port for the AVR32 (AT32UC3B0256) is incorporated
1578 NuttX-5.13
1579 ----------
1581 This is the 60th release of NuttX. Headlines for this release
1586 The port for the www.mcuzone.com AVRDEV1 board based on the
1592 (because it got bumped by the Olimex LPC1766-STK port -- see below)
1601 A complete port will include drivers for additional AVR32 UC3
1602 devices -- like SPI and USB --- and will be available in a
1605 * LPC1766, Olimex LPC1766-STK
1607 Support for the Olimex-LPC1766 is newly added to NuttX and is
1609 configurations for the NuttX OS test and for the NuttShell (NSH,
1613 they have not yet been verified. Goals for NuttX-5.14 include:
1619 NuttX-5.14
1620 ----------
1622 The 61st release of NuttX, NuttX-5.14, was made on November 27,
1624 as a new driver for the NXP LPC1766.
1630 * Cortex-M3 Hard Fault. Fixed a hard fault problem that can occur
1634 Ethernet interrupt). However, it is assumed that all Cortex-M3
1645 (and with no re-transmission requests). This was due to
1650 * One-Shot POSIX Timer Bug. Fixed an error in set-up of a one-shot
1652 is zero in the one-shot case), always resulting in a 10Ms timer!
1655 Additional support has been included for the Olimex-LPC1766. Support
1656 for that board was added to NuttX 5.13. This release extends that
1658 available for the NuttX OS test, for the NuttShell (NSH, see
1660 for the NuttX network test, and for the THTTPD webserver.
1662 have not yet been verified. Goals for NuttX-5.15 (and beyond) include:
1665 NuttX-5.15
1666 ----------
1668 The 62nd release of NuttX, NuttX-5.15, was made on December 12,
1670 enhancements, primarily for the Olimex LPC1766-STK board.
1675 "fixed" in NuttX-5.14.
1678 will go out instead. This improves behavior, for example, on
1685 ChangeLog for details).
1689 * The LPC176x Ethernet driver was using all of AHB SRAM Bank0 for
1691 the amount of SRAM used for packet buffering and to re-use any
1692 extra Bank0 memory for heap.
1695 LPC1766-STK NuttShell (NSH) configuration.
1699 devices require an additional out-of-band bit to specify if the
1703 * A driver for the Nokia 6100 LCD (with either the Phillips PCF8833
1704 LCD controller and for the Epson S1D15G10 LCD controller) and
1705 an NX graphics configuration for the Olimex LPC1766-STK have
1709 NuttX-5.16
1710 ----------
1713 2010 and is available for download from the SourceForge website.
1714 This release includes initial support for USB host in NuttX. The
1722 6.3.9 USB Host-Side Drivers
1724 work with USB host-side drivers are provided in this header
1748 Wait for a device to be connected or disconnected.
1759 * Binding USB Host-Side Drivers. USB host-side controller drivers
1764 on-board devices. For example, the USB host mass storage class
1784 in the file configs/olimex-lpc1766stk/src/up_nsh.c.
1796 NuttX-5.17
1797 ----------
1800 2011 and is available for download from the SourceForge website.
1805 support for low-speed devices, (2) handle multiple concurrent
1810 a standard USB keyboard to NuttX and receive keyboard input for
1815 NuttX-5.18
1816 ----------
1819 2011 and is available for download from the SourceForge website.
1825 * Incorporate several important uIP patches -- including the well
1828 not yet begun due to toolchain issues. Added support for the
1830 * Added support for a new STM32 board, the ISOTEL NetClamps VSN
1838 NuttX-5.19
1839 ----------
1842 and is available for download from the SourceForge website. This
1852 for applications using NuttX to have a highly customized
1853 initialization process. It supports a set of end-user applications
1856 of it this way: In a buckled-up embedded application, your
1857 end-user programs will probably have their own dedicated start-up
1860 This apps/ add-on (and NSH hooks) was contributed by Uros to
1863 /etc/init.d/rcS start-up scripts. This feature, as well, as
1864 all of the above-mentioned apps/ directory support was contributed
1867 for details.
1869 driver should support point-to-point network communications to
1874 * Cortex-M3 Power improvements: Waits for Interrupt (WFI) in idle
1875 loop for reduced power consumption (LPC17xx and STM32 only -
1880 NuttX-6.0
1881 ---------
1884 and is available for download from the SourceForge website. The
1888 functionality has been separated from NuttX application-related
1891 * nuttx-6.0.tar.gz, and
1892 * apps-6.0.tar.gz
1896 for incorporation of end-user applications with NuttX.
1902 * CONFIG_APPS_DIR - This should not be set. The default is
1904 product-specific application directory in some different location.
1906 * appconfig - Each board configuration now requires a new file
1915 re-designed. Now you can have an Ethernet connection to you
1916 board even if you have no Ethernet hardware. How cool is that?
1925 Please see the ChangeLog for details.
1927 NuttX-6.1
1928 ---------
1931 and is available for download from the SourceForge website. The
1932 6.0 release introduced a detach-able application environment to
1941 * The apps/ directory build system would not handle Windows-native
1945 Many additional changes were made in the 6.1 release for another
1950 in kernel-mode. This provides a secure environment for NuttX. This
1951 feature is fully coded in NuttX-6.1, but has not been tested due
1954 Related to this change, support for the Cortex-M3 memory protection
1963 * Support for LPC17xx GPIO interrupts (with much support from
1965 * Basic timer support for STM32 (Contributed by Uros Platise)
1969 * An I2C-based driver for the LIS331DL MEMS motion sensor.
1971 * A configuration for the Embedded Artists LPCXpresso LPC1768 board.
1975 8-bit types (int8_t), and USB serial device. See the ChangeLog for
1978 NuttX-6.2
1979 ---------
1982 is available for download from the SourceForge website. The 6.2
1985 * NXFFS: The obvious new feature is NXFFS, the NuttX wear-leveling
1987 small for the MCU usage and has some limitations. No formal
1989 file for details (see
1991 * Support for NXP LPCXpresso LPC1768 board on the Embedded
1995 * Support for the Univision UG-9664HSWAG01 OLED with Solomon
2004 and strrch(). See the ChangeLog for more details.
2006 NuttX-6.3
2007 ---------
2011 back-to-back release was made so that the current released version
2015 This release adds architecture support and build configuration for
2016 RGMP. RGMP is a project for running GPOS and RTOS simultaneously
2017 on multi-processor platforms. See
2018 http://rgmp.sourceforge.net/wiki/index.php/Main_Page for further
2021 This release also includes support for STM32 FLASH, build improvements,
2022 and initial, incomplete support for the MicroChip PIC32MX MCU. Bug
2023 fixes are included for some build problems, USB host class driver
2025 standard I/O buffer flushing. See the ChangeLog for further details.
2027 NuttX-6.4
2028 ---------
2031 and is available for download from the SourceForge website. The
2034 * A new, full-featured FTP client. This client may be used as a library
2035 for automated FTP or via an FTP client shell. The FTP shell
2038 rmdir, size, time, and up. A configuration is available for
2041 * A PCI-based E1000 Ethernet driver (contributed by Yu Qiang)
2044 * Reduced memory allocation overhead for MCUs with small heaps (<64K).
2046 buffered C functions to be used for network communications.
2055 * Support for the NXP LPC315x MCUs.
2060 NuttX-6.5
2061 ---------
2064 and is available for download from the SourceForge website. The
2065 6.5 release is all about support for the Atmel 8-bit AVR family.
2066 I have been interested in the AVR family for some time but because
2068 many tiny schedulers for the AVR, it has not been "on the radar
2076 This release includes support for the following AVR boards. As
2077 with any initial support for new architectures, there are some
2084 (http://www.soc-robotics.com/index.htm). Is only partially in
2096 the AT90USB647 version for testing. This version has very
2099 STATUS: The basic port was released in NuttX-6.5. This basic
2113 STATUS: The basic port was released in NuttX-6.5. This basic
2118 An SPI driver and a USB device driver exist for the AT90USB as
2120 configuration is not fully debugged as of the NuttX-6.5 release.
2122 AVR-specific issues. The basic AVR port is solid and biggest issue
2123 for using AVR is its tiny SRAM memory and its Harvard architecture.
2127 are available for accessing data in FLASH, but these have not been
2130 Most NuttX test applications are console-oriented with lots of
2131 strings used for printf and debug output. These strings are all
2133 smallest console-oriented applications can quickly fill a 4-8K
2134 memory. So, in order for the AVR port to be useful, one of two
2144 NuttX-6.6
2145 ---------
2148 and is available for download from the SourceForge website. The
2154 * Fixed several NX Graphics bugs: Rendering fonts at >8 bits-per-pixel,
2159 * LPC17xx: Changes for a success compilation with no console.
2161 * Changes for a clean compilation under the ZDS-II toolchain.
2166 still printf issues for that target)
2167 * Added a configuration for the Sure Electronics PIC32MX board.
2170 * Added several new configurations for the STMicro STM3210E-EVAL
2172 * Added support for the STM3210E-EVAL board: (1) LCD in either
2174 * Added a configuration option to use different serial ports for
2175 debug and for the NSH serial console (there are some issues
2176 with CR-LF expansion and character echo if NSH is not run on
2181 the background while pop-up windows occur. Text should continue
2185 See the ChangeLog for a detailed description of these changes.
2187 NuttX-6.7
2188 ---------
2191 and is available for download from the SourceForge website. Note
2192 that release consists of two tarballs: nuttx-6.7.tar.gz and
2193 apps-6.7.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2194 file for build information). Changes in this release are summarized
2198 * FAT File System: Adds (optional) support for VFAT long file
2201 and disconnected when not needed (or re-connected as a different
2204 Added a driver for the TI TSC2007 touchscreen controller chip.
2205 * NX Fonts: Add support for multiple fonts; developed a tool to
2215 * STM32: New NX-related configurations to exercise text and
2223 NuttX-6.8
2224 ---------
2227 and is available for download from the SourceForge website. Note
2228 that release consists of two tarballs: nuttx-6.8.tar.gz and
2229 apps-6.8.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2230 file for build information). Changes in this release are summarized
2233 * NuttX has been ported to run on the Freescale Cortex-M4 "Kinetis"
2234 boards. Two board ports are available for (1) the Kinetis
2235 KwikStik-K40 and (2) the Kinetis TWR-K60N512 tower.
2236 * Support for RGMP 0.3. This version of RGMP now runs on the
2241 initialization and for signals the wake up tasks that are waiting
2249 See the Changelog for additional changes included in this release.
2251 NuttX-6.9
2252 ---------
2255 and is available for download from the SourceForge website. Note
2256 that release consists of two tarballs: nuttx-6.9.tar.gz and
2257 apps-6.9.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2258 file for build information).
2263 * Analog Support/ NXP LPC17xx: New DAC sub-system including ADC and DAC
2264 drivers for the LPC17xx. Extensions to the ADS1255 driver.
2267 * Power Management: Added a new NuttX power management sub-system for
2279 * NXP LPC17xx: I2C and DAC driver for the NXP LPC17xx family submitted by Li Zhuoyi
2282 * Kinetis Cortex-M4: Added a SDHC driver for the Kinetis parts.
2286 * Other new drivers: Driver for I2C-based at24cxx EEPROM submitted by
2287 Li Zhuoyi (Lzyy); Driver for the LM-75 temperature sensor. Support
2288 for the LM-75 temperature sensor integrated into the SM3210E-EVAL
2291 * NuttX Graphics (NX): Added new NX interfaces for drawing circles,
2298 architecture-specific header files and include these in the NuttX
2315 only config CONFIG_RTC is enabled
2317 * Build System: Use of -print-libgcc-file-name to get path to
2321 NuttX-6.10
2322 ----------
2325 and is available for download from the SourceForge website. Note
2326 that release consists of two tarballs: nuttx-6.10.tar.gz and
2327 apps-6.10.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2328 file for build information).
2335 * CDC ACM serial class device-side driver
2337 * RTC: Now supports hi-res and lo-res hardware RTC. The lo-res RTC
2343 * ADS7843E touchscreen driver. As used on the SAM3U-EK development
2349 for the simulated target have been correct. Added support for a
2352 * System Timer. Added support for a 64-bit system timer.
2354 * TIFF Support. Added a TIFF library (currently used for storing
2361 repetitions and auto-address increment for most commands.
2377 * NXFFS. Added a missed error check. Files cannot be opened for
2378 writing if they are already opened for reading.
2380 * Library: fopen() for append modse was not appending.
2387 NuttX-6.11
2388 ----------
2391 and is available for download from the SourceForge website. Note
2392 that release consists of two tarballs: nuttx-6.11.tar.gz and
2393 apps-6.11.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2394 file for build information).
2403 to achieve a larger, more usable block size for NXFFS.
2405 * PIC32: Board configuration for the Microchip PIC32 Ethernet Starter kit
2407 for the Sure Electronics PIC32MX board. A lot of progress has been
2408 made on the PIC32 NuttX port, but it is still not ready for prime time.
2409 * NXP LPC3152: Board configuration for the Embedded Artists EA3152.
2415 * ARM EABI: Fix stack alignment required for passing floating point values.
2423 See the change log for more detailed information.
2425 NuttX-6.12
2426 ----------
2429 and is available for download from the SourceForge website. Note
2430 that release consists of two tarballs: nuttx-6.12.tar.gz and
2431 apps-6.12.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2432 file for build information).
2438 * STM32. Basic support added for the STM32 F4 family. Board support
2439 verified for the STMicro STM3250G-EVAL board.
2441 * SDIO-Based SD Card support. Add support for large (>4Gb) devices
2452 * C Library. wchar_t is a built-in type for C++
2454 NuttX-6.13
2455 ----------
2458 and is available for download from the SourceForge website. Note
2459 that release consists of two tarballs: nuttx-6.13.tar.gz and
2460 apps-6.13.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2461 file for build information).
2467 * Drivers. New standard interface for PWM drivers and common
2472 logic for saving/restoring F4 FPU registers in context switches.
2473 * STM32 Boards. Added STM3240G-EVAL DHPCD and nettest configuration.
2474 Support for a new STM32 board, the HY-Mini STM32v board, was
2477 reliable. The NuttX PIC32 port has verified configurations for
2479 * Tests: New re-usable tests (in apps/examples) for PWM, ADC, and
2480 CAN loopback. Several existing tests can now be built as NSH built-in
2490 And several others. See the ChangeLog for more details.
2492 NuttX-6.14
2493 ----------
2496 and is available for download from the SourceForge website. Note
2497 that release consists of two tarballs: nuttx-6.14.tar.gz and
2498 apps-6.14.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2499 file for build information).
2505 * Drivers. The upper-half PWM driver will now support a pulse count (as
2509 support for the STM32 F4. Add support for UART4-5 and USART6
2511 count for TIM1 and TIM8. Timer driver now supports the F4's 32-bit
2514 * STM32F4Discovery. Support for the STM32F4-Discovery board contributed
2517 * STM3240G-EVAL. Add support for user control of LEDs.
2519 * LPC17xx. Add support for loopback mode to CAN driver. CAN TX done
2523 * LPC1766-STK. Add support for on-board buttons. Add support for user
2526 * LM3S. Add support for the LM3S6432S2E on the TI RDK-S2E (Contributed
2529 * PIC32MX. USB device-side driver (needs further testing). A partial
2532 * Library. Support added for fixed floating point fieldwidths in output
2540 * Drivers. Fixed a buffer-full test in the upper-half CAN driver.
2554 And several others. See the ChangeLog for more details.
2556 NuttX-6.15
2557 ----------
2560 and is available for download from the SourceForge website. Note
2561 that release consists of two tarballs: nuttx-6.15.tar.gz and
2562 apps-6.15.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2563 file for build information).
2569 * General Drivers: Add support for (29-bit) extended CAN IDs. Add an
2570 infrastructure to support battery drivers. Add a driver for MAX17040x
2571 battery "fuel gauge". Add support for Composite USB drivers (in
2572 particular for a CDC/ACM with MSC USB composite driver).
2577 current contents of the log. This is useful for systems that do not
2578 have the usual serial console (for example, if you only have a
2591 (essentially) unlimited. Add support for (29-bit) extended CAN IDs.
2592 Add support for I2C3. The SDIO driver is (mostly) verified on the
2596 bit times can be set via the NuttX configuration. Add support for
2597 (29-bit) extended CAN IDs.
2605 * Library: Add support for on_exit(). Implemented tcsetattr() and
2606 tcgetattr(). Moved the old, too-smart fgets() to a new application
2611 * Build system: Support for building a 32-bit simulation executable on
2612 a 64-bit Linux machine. Correct a dependency issue in the arch/*/src/board
2621 * STM32: Fix clock frequencies for APB2 timers. Correct AFIO register
2624 * PIC32. Correct GPIOs used for LEDs on the Sure PIC32MX board.
2626 * NSH. Wait for a USB connection if a USB serial class is used to
2632 NuttX-6.16
2633 ----------
2636 and is available for download from the SourceForge website. Note
2637 that release consists of two tarballs: nuttx-6.16.tar.gz and
2638 apps-6.16.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2639 file for build information).
2645 * ARMv7M Support: Includes new, streamlined Cortex-M exception
2646 handling provided by Mike Smith. Context switching support for the
2647 Cortex-M4 FPU registers is now provided (in both "lazy" and "non-lazy"
2658 * STM32 Board Support. Added support for the STM32 F2 family and
2659 for the STM3220G-EVAL board (contributed by Gary Teravskis).
2660 Support is now included for C++ static constructors (verified using
2661 the Atollic toolchain). Added support for the SRAM available on the
2662 STM3240G-EVAL board.
2668 * Networking. Added a lower-level, thread-independent socket layer.
2673 * NuttShell (NSH). NSH will now support a USB serial connection for
2675 where there is no physical serial port on the board.
2681 * Networking: Fixed a "leak" in the TCP/IP read-ahead buffering logic.
2683 occurred when read-ahead buffering memory is exhausted.
2692 monitor for loss of connection after a new connection has been
2700 NuttX-6.17
2701 ----------
2704 and is available for download from the SourceForge website. Note
2705 that release consists of two tarballs: nuttx-6.17.tar.gz and
2706 apps-6.17.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2707 file for build information).
2713 * Networking: Additional low-level, thread-independent socket
2714 interfaces (for NFS client support).
2718 system re-awakens from certain deep-sleep modes.
2721 wraps an NX window and can be re-directed for stdout. This allows,
2722 for example, a pop-up graphics window that contains a NuttShell (NSH)
2728 * Calypso: Support for TI Calypso-based cellphones (as supported by
2729 the Osmocom-BB project) was contributed by members of the Osmocom-BB
2730 team. This includes configurations for the Compal e88 and e99 phones.
2733 because there was no mechanism for passing endpoint OUT data that
2736 * STM32 drivers: Added some power management controls for entering
2745 * PIC32 boards: Added support for the Sure DB-DP11212 PIC32 General
2750 The goal is to move any non-standard header files to include/nuttx
2755 * Tools: Added tools/cmpconfig.c, a tool for comparing two
2759 work that is still not ready for prime time.
2761 * NFS Client: Work is progressing on support for an NFS client
2766 kconfig-frontends tool is being incorporated into the build
2767 system. The configuration is still not complete enough for
2779 the file is opened write-only.
2782 multi-user NX server because of lack of use.
2788 * LPC17xx: Fixes for errors the crept in the LPC17xx DAC logic
2791 * Build System: Reordered the link command line to account for new
2795 NuttX-6.18
2796 ----------
2799 and is available for download from the SourceForge website. Note
2800 that release consists of two tarballs: nuttx-6.18.tar.gz and
2801 apps-6.18.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2802 file for build information).
2814 support for STMicro STMPE811 I/O Expander/touchscreen device.
2816 * STM32. Add support for the STM32 IWDG and WWDG watchodog timers. DMA
2820 * STM3240G-EVAL Board. Add support for the LCD and for the STMPE811
2823 * PIC32 Boards. Board support for the Mikroelektronika PIC32MX7
2824 Multimedia Board (MMB) and for the Sparkfun UBW32 PIC32 board.
2828 for details).
2836 work that is still not ready for prime time.
2838 * NFS Client. Work is progressing on support for an NFS client
2843 kconfig-frontends tool is being incorporated into the build
2844 system. The configuration is still not complete enough for
2850 Bugfixes (see the change log for details) :
2871 need to return non-zero values on success.
2873 * graphics: Many multi-use mode fixes added to support NxWM (see the
2874 ChangeLog for details). Auto-raise is temporarily disabled in multi-
2879 NuttX-6.19
2880 ----------
2883 and is available for download from the SourceForge website. Note
2884 that release consists of two tarballs: nuttx-6.19.tar.gz and
2885 apps-6.19.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2886 file for build information).
2890 This release features new support for a Network File System (NFS) client.
2896 This might be useful for data collection, for MCU configuration information,
2897 for software updates, for providing modular, loadable code modes, controlling
2898 a "farm" of MCUs, ... there are many possibilities and opportunities for
2903 nfsmount <server-address> <mount-point> <remote-path>
2905 That command will mount the remote NFS server directory <remote-path> at
2906 <mount-point> on the target machine. <server-address> is the IP address of
2914 for I/O buffers). Jose Pablo has spent several months living with NFS and
2925 The STM3220G-EVAL board support is now equivalent to the STM3240G-EVAL
2936 (not necessarily /dev/console). Additional enhancements for USB consoles.
2940 work that is still not ready for prime time.
2943 kconfig-frontends tool is being incorporated into the build
2944 system. The configuration is still not complete enough for
2950 Bugfixes (see the change log for details) :
2959 As well as other, less critical bugs (see the ChangeLog for details)
2961 NuttX-6.20
2962 ----------
2965 and is available for download from the SourceForge website. Note
2966 that release consists of two tarballs: nuttx-6.20.tar.gz and
2967 apps-6.20.tar.gz. Both may be needed (see the top-level nuttx/README.txt
2968 file for build information).
2980 * Drivers: Added a driver for the SST 25 SPI-based FLASH parts.
2982 * PIC32: Added support for the PIC32MX1 and PIC32MX2 families.
2983 Added support for the microchipOpen and Pinguino toolchains.
2985 * NXP LPC43XX: Added support for the entire LPC43xx family
2987 * PIC32 boards: Added support for the DTX1-4000L "Mirtoo" module
2990 * NXP LPC43XX Boards: Added support for NGX LPC4330-Xplorer board.
2992 * NXP LPC17XX Boards: Added support for Micromint Lincoln60 board
2996 EKK-LM3S3B96 development board. Contributed by Jose Pablo Rojas V.
2998 * Library: NuttX now supports platform-specific stdarg.h header
3002 work that is still not ready for prime time.
3005 kconfig-frontends tool is being incorporated into the build
3006 system. The configuration is still not complete enough for
3012 Bugfixes (see the change log for details) :
3016 * LM3S: Fixed an optimization related but that caused slow start-up
3022 As well as other, less critical bugs (see the ChangeLog for details)
3024 NuttX-6.21
3025 ----------
3028 and is available for download from the SourceForge website. Note
3029 that release consists of two tarballs: nuttx-6.21.tar.gz and
3030 apps-6.21.tar.gz. Both may be needed (see the top-level nuttx/README.txt
3031 file for build information).
3037 * Core: Add support for multiple registered atexit() functions. Syslog
3038 extended: Now any character driver may be used for the debug logging
3040 * Drivers: Added support for the TI PGA112-7 amplifier/multiplexor.
3041 * LPC43xx: Added clock ramp-up logic to run at 204 MHz
3042 * LPC43xx Drivers: SPIFI block driver, RS-485 support, Minimal termios
3043 support. Framework for USB0 device controller driver.
3045 * STM32: Support for STM32 F1 "Value Line" (contributed by Mike Smith).
3046 Add support for STM32 F107 "Connectivity Line" (contributed by Max
3048 Clock restart logic needed for recovery from low power modes.
3049 * STM32 Drivers: RTC alarm support. Usable for wakeup from sleep mode,
3051 * STM32 Boards: Add power management hooks for the STM32F4Discovery,
3052 Add support for the Olimex STM32-P107 (contributed by Max Holtzberg).
3053 * PIC32: Add support for the Pinguino MIPS toolchain.
3055 * PIC32 Boards: Add support for the PGA117 on the Mirtoo module.
3056 * Calypso: Add support for the SSD1783 LCD on the Compal E99.
3059 * Applications: Port of freemodbus-v1.5.0. Add support for testing
3061 NSH: NSH 'mount' command (with no arguments) will now show mounted
3070 Bugfixes (see the change log for details) :
3077 * STM32: Pinmap fixes, SPI driver re-initialization
3078 * STM32 Boards: Correct and lower SDIO frequency for F2 and f4 boards.
3080 * PM: Fix a place where interrupts were not be re-enabled.
3081 * Applications: NSH application start-up race conditions.
3082 * Library: Fieldwidth and justification for %s format. Fixed several
3084 for C++
3086 As well as other, less critical bugs (see the ChangeLog for details)
3088 NuttX-6.22
3089 ----------
3092 and is available for download from the SourceForge website. Note
3093 that release consists of two tarballs: nuttx-6.22.tar.gz and
3094 apps-6.22.tar.gz. Both may be needed (see the top-level nuttx/README.txt
3095 file for build information).
3103 svn checkout -r5206 svn://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
3107 svn checkout -r5206 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
3111 * RTOS: Application entry point is no longer user_start, but can be
3113 queues: A lower priority work queue (for extended processing) and a
3114 higher priority work queue (for quick, high priority operations).
3116 * Memory Management: Added a new granule-based allocated that can be
3125 external allocated (need if required by DMA). Driver for the Windbond
3127 extended for TSC2046 and XPT2046 and verified.
3129 * ARMv7-M: Added logic to reset the MCU using the NVIC.
3131 * STM32: Add support for STM32F103VET6.
3133 * STM32 Drivers: Add logic to re-initialize UARTs a second time to
3136 * STM32 boards: Support for USB host added add to several configurations
3137 (or at least explained in README files). Support for the Shenzhou
3138 STM32F107 board (see www.armjishu.com). Support for M3 Wildfire
3141 * Build System: Kconfig string de-quoting logic. Remove comments from
3142 defconfig files (Kate). Add tool to create NuttX-style symbol tables.
3143 Numerous changes to configuration logic as needed for the new mconf-based
3145 Make.defs logic into tools/Config.mk (Richard Cochran).
3151 (from Kate and Max Holtzberg, see the ChangeLog for specific extensions).
3153 …XML-RPC Server (http://www.drdobbs.com/web-development/an-embeddable-lightweight-xml-rpc-server/18…
3155 Bugfixes (see the change log for details). Some of these are very important
3161 * FAT File System: Improper Boolean expression caused un-necessary writes
3164 * Networking: Remove an un-necessary delay from recvfrom(). This greatly
3169 * Drivers: Fix double release of memory in SDIO-based, MMC/SD driver
3172 * LPC17xx: Ethernet driver fixes needed for certain PHYs (Kate).
3179 * STM32 Drivers: Fix for Ethernet errata for STM32F107 (*critical*).
3188 Vainish). Fix some field-width handling issues in sscanf()
3190 As well as other, less critical bugs (see the ChangeLog for details)
3192 NuttX-6.23
3193 ----------
3196 and is available for download from the SourceForge website. Note
3197 that release consists of two tarballs: nuttx-6.23.tar.gz and
3198 apps-6.23.tar.gz. Both may be needed (see the top-level nuttx/README.txt
3199 file for build information).
3207 svn checkout -r5313 svn://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
3211 svn checkout -r5313 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
3216 implement atexit(). Updates for RGMP 4.0.
3218 * Binfmt: Add support for loading and executing ELF binary modules from
3226 * STM32 Boards: ADC support for the Shenzhou IV board. Relay support for
3229 * C Library: Support is now included for the add-on uClibc++ C++
3230 standard library support. This includes support for iostreams, strings,
3231 STL, RTTI, exceptions -- the complete C++ environment. (uClibc++ is
3232 provided as a separate add-on package due to licensing issues).
3234 Optimized generic and ARM-specific memcpy() function. Optimized
3237 Add support for ferror(), feof(), and clearerror(). Add support for
3244 base64enc, bas64dec, md5 (Darcy Gong). Add support for NSH telnet login
3246 with very long round-trip times. Extensions to the ifconfig command
3255 Bugfixes (see the change log for details). Some of these are very important
3268 As well as other, less critical bugs (see the ChangeLog for details)
3270 NuttX-6.24
3271 ----------
3274 and is available for download from the SourceForge website. Note
3275 that release consists of two tarballs: nuttx-6.24.tar.gz and
3276 apps-6.24.tar.gz. Both may be needed (see the top-level nuttx/README.txt
3277 file for build information).
3285 svn checkout -r5447 svn://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
3289 svn checkout -r5447 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
3295 - Implemented the POSIX pause() function (still has some compiance
3297 - Tasking logic is extended to support the notion of address
3302 - If support for the PATH variable is enabled, the OS start up logic
3309 - The NuttX binary loaders have been updated to support the PATH
3315 - The NXFLAT and ELF binary loaders have been extended to create
3316 address environments for any new tasks executed from the file system.
3321 * Drivers: LCD driver for the Univision UG-2864AMBAG01 OLED
3323 * STM32: Support for STM32F100 high density chips contributed by Freddie
3326 * STM32 Drivers: Added optional RS-485 direction bit control (from
3331 - Support for generic STM32F100RC board contributed by Freddie Chopin.
3332 - stm32f4discovery/nxlines: STM32F4Discovery support for the
3333 UG-2864AMBAG01 OLED.
3334 - stm32f4discovery/winbuild: A version of the NuttX OS test
3336 - stm32f4discovery/elf: Now uses the PATH variable to find ELF
3338 - configs/cloudctrl: Added for Darcy Gong's CloudController board
3340 * PIC32 Boards: Update the Mirtool configuration for Release 2 of the
3347 - Add support for the z180 chip family and, specifically, for
3349 - All ZiLOG configurations updated to use the current ZDS-II
3354 - Add a semaphore handshake so that operations on buffers from
3357 - nxtk_subwindowmove() and nxtk_getwindow(): Improvements to clipping
3360 * C Library: lib/ sub-directory renamed libc/ (there is a new lib/ sub-
3367 - Add NSH hexdump command to dump the contents of a file (or character
3369 - Extend the NSH ifconfig command plus various DHCPC improvements
3374 - ostest: Replace large tables with algorithmic prime number
3377 - keypadtest: A new keypad test example contributed by Denis Carikli.
3378 - elf and nxflat: If CONFIG_BINFMT_EXEPATH is defined, these examples
3385 - New top-level Makefiles: Makefile.unix and Makefile.win (along with
3386 numerous changes to other make-related files). This adds basic
3387 support for building NuttX natively under Windows from a CMD.exe
3388 window (rather than in a POSIX-like environment). This build: (1)
3394 and (2) still lacks some of the creature-comforts of the more
3398 - Example Windows native builds for STM32F4Discovery, eZ80, z16f, z8,
3400 - Several configurations have been converted to work the kconfig-
3403 - Architectures now include a common Toolchain.defs file that can be
3409 - Renamed tools/winlink.sh to tools/copydir.sh.
3410 - Several new tools/scripts to support the Windows native build:
3413 - tools/incdir.sh and incdir.bat now support an -s option to generate
3415 - tools/b16.c: Fixed precision math conversion utility.
3417 Bugfixes (see the change log for details). Some of these are very important
3426 * Drivers: Partial fix for STM32 OTGFS device drivers and fix for short,
3432 - Qencoder driver and TIM3 driver fixes from Ryan Sundberg.
3433 - Fix timeout delay calculation in the STM32 OTG FS host driver.
3436 driver is un-initialized.
3440 - Fix logic when the mouse drags outside of the window; fix
3442 - nxtk_filltrapwindow(): Correct an offset problem (also from Peterri
3444 - nxglib_splitline(): Correct the "fat flat line" bug.
3448 - nrand() changes to prevent coefficients from becoming zero which
3450 - Add rounding functions to the math library (contributed by Petteri
3454 to avoid integer overflows. For example from (-128) to (-127 - 1)
3459 As well as other, less critical bugs (see the ChangeLog for details)
3461 NuttX-6.25
3462 ----------
3465 and is available for download from the SourceForge website. Note
3466 that release consists of two tarballs: nuttx-6.25.tar.gz and
3467 apps-6.25.tar.gz. Both may be needed (see the top-level nuttx/README.txt
3468 file for build information).
3476 svn checkout -r5595 svn://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
3480 svn checkout -r5595 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
3486 - Removed support for CONFIG_BUILTIN_APP_START. This is not really a
3492 - Implement a simple vfork(). In NuttX-6.25, this interface is
3493 available only for ARM7/9, ARMv7-M (Cortext-M3/4), and MIPS32
3495 - exec() now sets the priority of the new task to the same priority as
3497 - New, partially compliant implementations of execv() and execl().
3500 - Add a complete implementation of posix_spawn(). This standard
3501 interface is a better match for an MMU-less architecture than are
3503 - Add a task start hook that will be called before the task main
3504 is started. This can be used, for example, to schedule C++
3510 - Repartitioned tasking data structures. All shared resources are now
3513 - Added support for remember the parent "task group" when a new task is
3515 - Added optional support to record the membership of each thread in
3517 - Implement support for retaining child task status in the "task group"
3521 - Add internal logic to "reparent" a task. This is useful,
3522 for example, where the child task is created through a trampoline
3524 to be reparented for the eventual child thread.
3525 - Added support for SIGCHLD. Sent to all members of the parent task
3527 - If SIGCHLD and retention of child task exist status are enabled, then
3528 a more spec-compliant version of waitpid() is enabled.
3529 - New interfaces waitid() and wait() are also enabled when SIGCHLD
3534 - dup() and dup2() can new be used with opened files in a mounted file
3535 system. This supports re-direction of output in NSH to files.
3536 - The binfs file system was moved from apps/builtin to fs/binfs. The
3539 - Added logic based on SIGCHLD to automatically unload and clean-up
3544 - Much of the logic for "builtin applications" was moved from
3547 - A binary loader was added for builtin applications to support
3553 - Added logic to marshal and serialized "out-of-band" keyboard
3559 - Driver for the UG-2864HSWEG01 OLED contributed by Darcy Gong.
3560 - Add support for removable serial devices (like USB serial). This
3563 * ARMv7-M:
3565 - Added an option to use the BASEPRI register to disable interrupts
3572 - Bring STM32 F1 DMA capabilities up to par with the STM32 F2/F4
3574 - Add support for USART single wire mode (Contributed by the PX4
3576 - Updates to support for SPI DMA on the STM32 F1/F2/F4. From
3581 - New configuration to support the UG-2864HSWEG01 OLED on the
3583 - Added a posix_spawn() test configuration for the STM32F4Discovery.
3587 - Files and directories repartitioned to support both LM3S and LM4F
3589 - Partial definitions for the LM4F contributed by Jose Pablo Carballo
3594 - Added scripts and documentation to use OpenOCD with the LM3S (from
3599 - Files and directories repartitioned to support both LPC175x/LPC176x
3605 - Added a configuration to support the Wave Share Open1788 board.
3610 - Add basic support for the The0.net ZP213x/4xPA board (with the LPC2148
3612 - Add an nxlines configuration for the ZP213x/4xPA (with the LPC2148
3617 - Add an nxlines configuration for the simulator.
3621 - Add logic to work around delayed ACKs by splitting packets
3623 - Split net_poll() to create the internal interface psock_poll().
3627 - Added support for LCD1602 alphanumeric LCD (HD4468OU controller).
3631 - Added 5x8 monospace font. This tiny font is useful for graph
3632 labels and for small bitmapped display. Contributed by Petteri
3637 - Add an options to better manage toolchain prefixes.
3638 - Redesigned how the context target works in the apps/ directory.
3640 because there is no easy way to get the system to rebuild the
3646 - There are several new configurations that use the kconfig-frontends
3653 configs/stm3220g-eval/nxwm
3655 configs/olimex-lpc1766stk/nsh
3656 configs/olimex-lpc1766stk/hidkbd
3657 configs/olimex-lpc1766stk/nettest
3661 configs/lm326965-ek (all configurations)
3662 configs/mcu123-214x/nsh
3667 - tools/kconfig.bat: Kludge to run kconfig-frontends from a DOS shell.
3668 - tools/configure.c: configure.c can be used to build a work-alike
3669 program as a replacement for configure.sh. This work-alike
3672 - tools/configure.bat: configure.bat is a small Windows batch
3673 file that can be used as a replacement for configure.sh in a
3681 - New and modified examples:
3683 apps/examples/wlan: Remove non-functional example.
3685 handler test to catch death-of-child signals (SIGCHLD). Add a
3686 test for waitpid(), waitid(), and wait().
3689 - NSH:
3691 NSH now supports re-direction of I/O to files (but still not from).
3693 optional for file systems that do not require a block driver.
3695 Added support for a login script. The init.d/rcS script will be
3697 for each session: Once for serial, once for each USB connection,
3698 once for each Telnet session.
3700 - Supports a new daemon that can be used to monitor USB trace outpout.
3701 - Removed non-functional wlan example.
3703 Bugfixes (see the ChangeLog for details). Some of these are very important:
3707 - Fixed a *critical* task exit bug. Here is the failure scenario:
3711 of the ready-to-run list, then (3) sched_unlock() is called which
3713 I saw was that pre-emption got disabled in the IDLE thread, locking
3718 - sigtimedwait() would return a bad signal number if the signal was
3723 - Some SD cards will appear busy until switched to SPI mode for
3724 first time. Having a pull-up resistor on MISO may avoid this
3726 without pull-up.
3730 - STM32 FLASH driver counting error (from Freddie Chopin).
3731 - STM32 F4 maximum SPI frequency was wrong (corrected by Petteri
3736 - Due to cloning of untested code, the logic to control on-board
3738 - Serial devices number /dev/ttyS0-5 is there is a serial console,
3739 but /dev/ttyS1-6 if there is no serial console.
3743 - C++ static constructors execute now using a start taskhook
3749 - Several FAT-related bugs fixed by Petteri Aimonen.
3753 - Fix poll/select issure reported by Qiang: poll_interrupt() must call
3757 - Similar issues corrected for recvfrom() and send().
3758 - Telnetd would hang in a loop if recv() ever returned a value <= 0.
3762 - fread() could hang on certain error conditions.
3763 - Can't handle SYSLOG output to a character device from the IDLE task
3768 - Serial was driver was not being built if there is no console
3774 - sig_timedwait() and clock_time2ticks.c: Timing "rounding" logic
3775 - ARM9 Compilation issue with low vectors.
3776 - readline() return value
3777 - Others as detailed in the ChangeLog: HID keyboard, LPC17xx bit
3781 NuttX-6.26
3782 ----------
3785 and is available for download from the SourceForge website. Note
3786 that release consists of two tarballs: nuttx-6.26.tar.gz and
3787 apps-6.26.tar.gz. Both may be needed (see the top-level nuttx/README.txt
3788 file for build information).
3796 svn checkout -r5745 svn://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
3800 svn checkout -r5745 http://svn.code.sf.net/p/nuttx/code/trunk nuttx-code
3806 - Add an additional call-out to support board-specific driver
3807 initialization during the boot-up phase (available with
3812 - New interface task_spawn() that is like posix_spawn(), but uses
3814 - Additional data restructuring as a continuation of the task group
3819 - TCBs for tasks and pthreads are now separate structures. This
3821 for threads and vice versa.
3825 - Extensive changes were made to support the kernel build mode. In
3832 - Extensive changes were made to the syscall, SVCall, and trapping
3834 - The memory manager was extended to support both kernel- and user-
3836 correct kernel- or user-space allocator, depending upon the user
3838 - The user-space blob now contains a header built in at the beginning
3840 provided by a kludgy, auto-generated header file (user_map.h).
3841 - Basic support implemented for the ARMv7-M family with fragments
3842 also implemetned for the ARMv6-M and MIPS32 families.
3843 - Kernel build supported added for the LPC17xx Open1788 and for
3844 the Atmel SAM3U-EK board. All testing is being performed on the
3849 - Delivery of signals to threads within a task group is now compatible
3854 - Add a driver for the SST29VF NOR FLASH parts.
3855 - USB device trace/debug feature extended to decode device-specific
3858 - USB MSC device driver can not support names of differing sizes
3860 - Locking added to MMC/SD SPI drivers so that MMC/SD can co-exist on
3864 * ARMv6-M (Cortex-M0):
3866 - Added support for the ARM Cortex-M0 family.
3870 - Added support for the nuvoTon NUC120 MCU (Cortex-M0).
3874 - Added basic support for the nuvoTon NuTiny-SDK-NUC120 board (Cortex-M0).
3878 - Added support for the LPC177x and LPC178x families. Most of this is
3883 - Added support for Zilogic System's ARM development Kit, ZKIT-ARM-1769.
3885 - The port for the WaveShare Open1788 board is now functional. Basic
3891 - Added an SD card MSI driver for the LPC178x. The driver is marginally
3896 - Support extended to handle the STM32 F3 family (Cortex-M4 with F1-like
3901 - Added support the STMicro STM32F3Discovery board (STM32 F3).
3905 - Basic support for the LM4F120 family is in place, but untested (mostly
3910 - Add support for the LM4F120 LaunchPad (untested).
3914 - select() should now allocate a little less memory.
3918 - Extended to support multiple heaps. This is used as part of
3919 the kernel build in order to support separator user- and
3920 kernel-mode heaps.
3921 - The stand-alone memory manager test had to be removed. It
3927 - Several configurations converted to use the kconfig-frontends
3933 - Move the workqueue logic into the C library. There is now a
3934 special user-space version of the work queue (which will only
3936 - Implementation of itoa() contributed by Ryan Sundberg.
3940 - The NSH builtin task logic now uses task_spawn() to start builtin
3942 - The OS test now includes a test cased to verify task_restart().
3958 * Conversion of old configurations to use the kconfig-frontends
3959 tool is an ongoing effort that will continue for some time.
3961 Bugfixes (see the ChangeLog for details). Some of these are very important:
3965 - The wrong PID was being signalled with SIGCHLD. It should be
3968 - Added logic so that some internal resources and states are recovered
3972 * ARMv7-M:
3974 - Several fixes to the MPU control logic.
3978 - Removable serial drivers race conditions fixed.
3979 - MAX11802 timing bug (from Petteri Aimonen).
3983 - Handle cases were SPI DMA logic fails if sem_wait is awakened
3987 - Fixes to the OTG FS device driver from Petteri Aimonen.
3988 - Fix typos in DMA register header file (from Yan T.)
3992 - Correction to the hyphen in the SANS 17x22 font (from Petteri
3997 - Corrected errors in the socket poll/select logic. Additional
4003 - mallinfo() should hold the memory manager semaphore (from Petteri
4008 - Resolved several build errors reported by Mike Smith.
4012 - Fixed an NSH memory leak: Needed to detach after creating each
4014 - readline() now returns EOF on any failure (instead of a negated
4016 logic similar to getc. The value zero (meaning end-of-file)
4021 NuttX-6.27
4022 ----------
4025 and is available for download from the SourceForge website. Note
4026 that release consists of two tarballs: nuttx-6.27.tar.gz and
4027 apps-6.27.tar.gz. Both may be needed (see the top-level nuttx/README.txt
4028 file for build information).
4034 - Add missing registration of /dev/zero. Registration of /dev/null
4039 - Added a new interface to set aside memory on the task's stack. This
4041 - Remove up_assert_code(). One assertion routine is enough.
4045 - Extensive changes were made to support the kernel build mode. In
4052 - Kernel build configurations for the Open1788 board and for the
4054 - Changes were made to task and thread start-up routines, signal
4055 handling, data structures, ARMv7-M SVCalls, stack management
4060 - Driver for the ST7567 LCD Display Module from Univision Technology
4062 - SPI initialize functions renamed so that multiple SPI blocks can
4064 - Extended to support the RAMTRON FM25V01 device. Contributed by
4066 - Serial drivers: TIOCSERGSTRUCT ioctls now conditioned on
4069 * ARMv7-M (Cortex-M3/4):
4071 - Added support for modifiable interrupt vectors in RAM
4075 - Added kernel build support
4079 - Add kernel build support
4080 - Add support for the Kinetis L family of Cortex-M0+ MCUs. Contributed
4085 - Now holds off sleep mode in the IDLE loop is DMA is in progress
4090 - ZKIT-ARM-1769: Now supports the ST7567 LCD display module. Added
4091 an nxhello configuration for testing (Manikandan.S).
4092 - ZKIT-ARM-1769: Add support for both CAN1 and CAN2. Contributed by
4095 - Open1788: Basic support for the WaveShare Open1788 board is complete
4097 - Open1788: Integrated the LPC178x LCD driver with the WaveShare display.
4100 - Open1788: Now supports SDRAM (used to provide the LCD framebuffer).
4101 - Open 1788: Reversed sense of the IDLE LCD. It is now off when the
4107 - Added an LCD framebuffer driver for the LPC177x/8x family.
4108 - Implemented LPC17xx GPDMA support.
4109 - Integrated the LPC17xx GPDMA support into the SD card driver.
4110 - SSP driver adapted to work with the LPC178x family.
4111 - Separate LPC176x and LPC178x GPIO logic; this logic is too different
4113 - Re-design of the GPIO logic for the LPC178x family by Rommel Marcelo.
4117 - Added kernel build support
4121 - Added support for kernel mode build.
4122 - Added architecture support for the STM32 F427/F437 chips. Contributed
4127 - Added a configuration to support a kernel mode build of the OS test
4132 - Added kernel build support
4133 - Added support for the 7 UARTs on the LM4F120
4137 - Added scripts and instructions to simplify use of OpenOCD with ICDI
4139 - The basic for the Stellaris LM4F120 Launchpad is complete. This
4140 includes support for OS test and NSH configurations. Additional
4145 - Directories where the same sources files are used to build different
4152 - apps/system/ramtest: Add a simple memory test that can be built
4157 - kconfig2html is a new tool which will replace the hand-generated
4158 documentation of the NuttX configuration variables with auto-
4166 enough. The KL25Z is a low-cost Cortex-M0+ part with 128KB of FLASH
4169 * Conversion of old configurations to use the kconfig-frontends
4170 tool is an ongoing effort that will continue for some time.
4172 to use the kconfig-frontends tools.
4174 Bugfixes (see the ChangeLog for details). Some of these are very important:
4178 - Fixed a critical bug: When there is pending C buffered output
4186 * ARMv6-M:
4188 - Fixed parameter passing for all system call inline functions with > 3
4190 - Fixed a major problem: The Cortex-M0 has no BASEPRI register but the
4191 logic of NuttX-6.26 was using it to manage interrupts. Switch to
4195 * ARMv7-M:
4197 - Corrected Correct MPU sub-region settings for unaligned regions.
4198 - In exception handling with CONFIG_NUTTX_KERNEL, need to explicitly
4200 - Fixed parameter passing for all system call inline functions with > 3
4205 - Support for O_NONBLOCK was not supported in the "upper half"
4207 - PL2303 compilation errors
4211 - Corrected typos in alternate function definitions.
4215 - Added a work-around for an ADC errata. From Chris Taglia
4216 - Only one ADC pin was configured. Need to configure all that
4221 - The FAT logic was not making a distinction between directory
4222 non-existence and file non-existence so when it you try to
4223 create a file in a non-existent directory, it would create a
4226 - Several fixes to the FAT file system from Ronen Vainish. These
4227 fixes mostly involve the logic to extend directory clusters for
4229 general fixes (such as for storing 32 bit FAT values)
4230 - mkfatfs was writing the boot code to the wrong location. From
4235 - Fixed a compilation error when socket options are are disabled.
4240 - Corrected an error in sscanf. If %n occurs in the format statement
4243 - strchr(str, '\0') should return a pointer to the end of the string,
4248 - Fix naming of NuttX target if EXEEXT is defined.
4252 - OS test: Fix timing error in non-cancelable thread test.
4253 - NSH: Correct the test of the skip input parameter. Was limiting the
4256 NuttX-6.28
4257 ----------
4260 and is available for download from the SourceForge website. Note
4261 that release consists of two tarballs: nuttx-6.28.tar.gz and
4262 apps-6.28.tar.gz. Both may be needed (see the top-level nuttx/README.txt
4263 file for build information).
4269 - SMART FLASH file system (contributed by Add Ken Pettit).
4273 - Add support of MTD partitions via a new MTD driver that manages a
4276 - Extended the MTD interface to provide an (optional) method to
4278 - M25Px driver re-architected to use the byte write capability (when
4279 possible) and to use 4KB sectors for the erase block size when the
4284 - New interface definitions to support audio devices (from Ken Pettit)
4289 - Added new driver for the wireless nRF24L01+ transceiver (from
4294 - Added support for the Pirelli DP-L10 phone (from Craig Comstock via
4299 - Added an option to conditionally disable the "wfi" sleep mode. This
4302 - Added support for the STM32L (STM32L15X/STM32L16x) family.
4303 - Added STM32F103C4 and F103C8 chip support (from Laurent Latil).
4304 - Added a new interface function, stm32_dmacapable() that can be used
4310 - If CONFIG_STM32_DMACAPABLE is defined, the STM32 SPI driver now uses
4312 from the specified address. This change is important for the STM32
4318 - Support added for the MikroElektronika Mikromedia for STM32F4
4321 - The HY-mini STM32v board now uses the common SSD1289 driver
4324 - Support added for the R65105-based LCD that comes with some
4325 HY-Mini STM32v boards (from Christian Faure).
4326 - Added basic support for the STM32L-Discovery board. Drivers
4327 for the on-board segment LCD are included.
4328 - Added support for the STM32 Tiny development board based on the
4329 STM32 F103C8T6 MCU. This includes support for the nRF24L01+
4334 - Support added for a TI/Stellaris internal FLASH MTD driver (from Max
4339 - The LM3S6965-EK now has configurations for the UDP discovery tool and
4340 for the TCP echo server (both from Max Holtzberg)
4344 - Reorganized, renamed, and updated directory structure to better
4346 - Added support for both the ATSAM4S and ATSAM4L families. The
4349 with a Cortex-M4.
4353 - Added support for the Atmel SAM4L Xplained Pro development board.
4354 This board features the ATSAM4LC4C MCU (Cortex-M4 with 256KB FLASH +
4356 - Added support for the Atmel SAM4S Xplained development board. This
4357 board features the ATSAM4S16C MCU (Cortex-M4 with 1MB FLASH + 128KB
4362 - Added support for the 1602 segment LCD on-board the Sure PIC32MX
4368 - Clean-up of almost all .gitignore files: Made scope of ignore to be
4372 - Standardize and consolidated all build-as-an-NSH-application
4376 - Added support for a generic ARM, ARMv6-M and ARMv7-M Windows EABI
4381 - Added encoder/decoder logic to marshal and serialize special segment
4385 - Add dprintf() and vdprintf() (the latter from Andrew Tridgell).
4386 - Add an application that may be built as an NSH builtin command that
4391 - Added an MTD partition test/examples. Currently used with (1) the a
4394 - Added a test/example to verify alphanumeric, segment LCDs.
4395 - Added a simple single threaded, poll based TCP echo server based
4398 - Added several tests of the SMART block driver and file system (from
4400 - Added a runtime configuration for the UDP discover utility (from
4402 - Added an example application to demo the nRF24L01 driver (from
4404 - New and modified NSH commands:
4405 Added a -h option to the df command to show the volume information
4415 - A complete audio subsystem include CODECs, higher level management,
4418 release and so is categorized as a work-in-progress. At present,
4422 * kconfig-fronted Configuration:
4424 - Conversion of old configurations to use the kconfig-frontends
4425 tool is an ongoing effort that will continue for some time.
4427 to use the kconfig-frontends tools.
4429 Bugfixes (see the ChangeLog for details). Some of these are very important:
4433 - Modify assertion in the priority inheritance logic that is reported
4438 - Typo in syscall proxying logic corrected by Ken Pettit.
4442 - Poll setup/teardown logic should ignore invalid (i.e., negative)
4444 - When readahead data is available, the network poll() logic should
4449 - Correct power controls in the MIO283QT2 LCD driver.
4453 - Change the default IN request buffer size from 64 to 96. This will
4460 - Correct some bad STM32 F1 DMA definitions that crept into the system
4462 - Fixed an error in NULL packet handling in the STM32 F1 USB device
4463 controller driver: If the NULL-packet needed flag ever got set,
4467 change the USB works well as an alternative NuttX console device for
4469 - Correct some bad condition compilation in the RCC logic (CONFIG_
4470 missing from setting names). This affects some STM32 FLASH pre-
4472 - Change for hardware flow control support for STM32. The change also
4475 - Fixed a backward conditional in USB OTG FS host controller driver
4480 - I2C interrupt control. Also correction for a single byte read
4485 - Freedom KL25Z pin multiplexing and LED control corrections (from
4490 - Fix NULL packet handling in the PIC32 USB device driver. Without
4497 - Default priorities for NxWidget and NxWM threads should be 100,
4502 - Remove the CONFIG_EXAMPLES_NXTEXT_NOGETRUN option from the NXTEXT
4503 example. The test logic was bad for the case where this options is
4505 - C++ name mangling was occurring when this example is built as an NSH
4506 built-in application causing the entry to be undefined when called
4508 - Add some missing NSH library configuration values (from Lorenz
4511 NuttX-6.29
4512 ----------
4515 and is available for download from the SourceForge website. Note
4516 that release consists of two tarballs: nuttx-6.29.tar.gz and
4517 apps-6.29.tar.gz. Both may be needed (see the top-level nuttx/README.txt
4518 file for build information).
4524 - Generalized the SSD1306 driver and added support UG-2832HSWEG04
4525 which is very similar to the existing support for the
4526 UG-2864HSWEG01.
4527 - Added support for a generic bit-bang SPI driver. This includes
4528 both a common "upper half" driver as well as a platformp-specific
4531 * ARMv7-A, Cortex-A5
4533 - Added support for the ARMv7-A architecture and the Cortex-A5 in particular.
4535 * ARMv7-M, Cortex-M3/4
4537 - Modified how some registers are copied during a context switch (with
4543 - Added support for a separate CCM heap. This may be useful for
4544 segregating allocations for CCM (which cannot be used for DMA)
4545 from other allocations (that may be used used for DMA).
4549 - DAC: Added support for DAC DMA (contributed by John Wharington).
4550 - I2C: An I2C driver for the STM32 F3 family (from John Wharington).
4554 - Add support for SAM3X and SAM3A chips
4558 - Re-architect the SAM3/4 SPI driver so that is it compatible with the
4560 - Added register definition file for the SAM4L LCD peripheral.
4561 - Added SAM4L PDCA register definition file
4565 - SAM4L-Xplained: Added support for the SPI-based SD card on the I/O1
4567 - SAM4L-Xplained: Added a driver for the LED1 segment LCD module.
4568 - SAM4L-Xplained: Added support for the UG-2832HSWEG04 OLED on the
4570 - SAM4S-Xplained: Added support for on-board 1MB SRAM
4571 - Arduino Due: Basic support for the Arduino Due (SAM3X) is now
4573 - SAM3U-EK: The touchscreen is now functional.
4577 - Added support for the Atmel AT91SAMA5D3 Cortex-A5 chip family.
4581 - Added support for the Atmel SAMA5D3x-EK boards which use the AT9
4586 - Freescale KL25Z TSI register definitions and example TSI driver for
4588 - Added SPI driver and register definitions for the Freescale KL25Z.
4589 - Added a framework for controlling SPI-related discrete inputs and
4594 - New sub-directories to hold SPI-related files: includes/nuttx/spi.h
4595 moved to include/nuttx/spi/.; SPI-related Kconfig info moved from
4597 - Finally... I changed the naming of configuration variables like
4598 CONFIG_DRAM_ to CONFIG_RAM_. This has bothered me for a long time
4604 - Added CRC16 support.
4608 - Added Zmodem file transfer support. This may be used as an embedded
4611 - C++ initializers should be set once and, preferably, in the context
4620 - examples/cxxtext: Add ostream test as provided by Michael.
4621 - NSH: Added a 'cmp' command that can be used to compare two files
4622 for equivalence. Returns an indication if the files differ.
4631 - A complete audio subsystem include CODECs, higher level management,
4634 release and so is categorized as a work-in-progress. At present,
4638 * kconfig-fronted Configuration:
4640 - Conversion of old configurations to use the kconfig-frontends
4641 tool is an ongoing effort that will continue for some time.
4643 to use the kconfig-frontends tools.
4645 Bugfixes (see the ChangeLog for details). Some of these are very important:
4649 - Fixed compilation error if no file systems are enabled: Change
4651 - Read-Ahead/Write buffering: Correct typos that can cause failures
4656 - Remove the wait for the touchscreen busy bit in the ADS7843E driver.
4658 wait for the BUSY bit to de-asserted anyway (since it is only de-
4661 - MMC/SD SPI based driver: Driver needs to make sure that the SPI
4663 - ENC28J60: Change buffer ordering to work around Errata. From Dave
4668 - Fixed a typo in the composite device driver unitialization logic.
4670 - usbdev.h: Fix some typos that cause compiler errors when
4676 - Fix a bug (uninitialized register error) that crept in the ARM9
4677 boot-up code several years ago. Obviously no one has used the
4678 ARM9 NuttX port for years!
4682 - Fix STM32 OTF FS endpoint allocation logic. Apparently the same
4687 - SDIO: Add support for the data block end (DBCKEND) interrupt to
4689 - DAC: Fixed numerous DAC driver errors and added support for DAC
4694 - SAM4S: Correct configuration of PIO pins for SAM4S B and C peripherals.
4695 - Need to disable write protection before configuring PIO pins.
4696 - GPIO configuration logic must protect against re-entrancy.
4697 - Clocking must be applied to the SMC module for the 3X and 3A family in
4698 order for the NFC SRAM to be functional.
4699 - Fixed some errors for interrupts on ports D-F.
4703 - Common SPI driver: Fix SPI mode setting. In the SAM3/4 family, the
4709 - SAM3U-EK: Fix polarity of the /PENIRQ signal (it is active low).
4710 The SAM3U-EK board now runs at 96MHz.
4714 - apps/examples/nxhello: Minor fix for compilation error when the
4716 for a long time. Also Correct default colors when in Y1 code mode.
4717 - apps/system/ramtest: The RAM test was not correctly built
4719 - apps/examples/composite: Change to prevent some false alarm debug
4722 NuttX-6.30
4723 ----------
4726 and is available for download from the SourceForge website. Note
4727 that release consists of two tarballs: nuttx-6.30.tar.gz and
4728 apps-6.30.tar.gz. Both may be needed (see the top-level nuttx/README.txt
4729 file for build information).
4735 - Extended TERMIOS support for serial and CDC/ACM drivers. From
4737 - Added option to disable serial port reordering. From Lorenz Meier.
4738 - Several changes to the USB host control interface and extensions to
4741 - USB device tracing: Extended decoding and stringifying of USB trace
4743 - USB host tracing: Added support for USB host tracing similar in
4750 - Support for the Microchip ENCX24J600 Ethernet driver from Max
4752 - CC3000 Networking. Initial support for the TI CC3000 network
4753 module on the Freescale Freedom-KL25Z board from Alan Carvalho
4756 * ARMv7-A, Cortex-A5
4758 - Restructured some MMU-related logic and header files.
4759 - Hooks added for Cortex-A8, but not yet used.
4763 - STM32 SPI: nbits() interface extended to control bit order as well
4768 - Olimex STM32-P107: Incorporate ENCX24J600 networking for the Olimex
4770 - LeafLabs Maple Board: Add board support for the LeafLabs Maple and
4775 - Added support for the SAMA5 DMAC controllers.
4776 - DMA-capable drivers for the SAMA5 SPI peripherals.
4777 - DMA-capable HSCMCI 0/1/2 drivers.
4778 - Support for PIO interrupts
4779 - Utilities for intelligent conversions between physical and virtual
4781 - Added USB host controller drivers for both the OHCI (low- and full-
4782 speed) peripheral and the ECHI (high-speed) peripheral.
4783 - Added USB device controller for the SAMA5 UDPHS peripheral (full-
4784 and high-speed).
4785 - Added a Two Wire (TWI) driver. This is a variant of I2C.
4787 * Atmel AT91 SAMA5D3x-EK Development Boards
4789 - Now supports onboard SDRAM. Modified heap initialization logic
4791 - Integrated a FAT file system on the on-board SPI-based AT25 serial
4793 - Integrated HSMCI0 and HSMCI1 support for the microSD and full file
4794 SD card slots. Includes PIO interrupts for card detection events.
4795 - Integrated USB OHCI and ECHI host and high-speed peripheral support.
4798 - Integrated the TWI driver and the I2C tool. Added support for an
4803 - apps/examples/cc3000. Initial support for the TI CC3000 network
4804 module on the Freescale Freedom-KL25Z board from Alan Carvalho de
4806 - apps/examples/usbmsc: apps/examples/usbstorage renamed usbmsc for
4808 - apps/system/usbmonitor: The USB monitor has been extended so that
4817 - CC3000 Networking. Initial support for the TI CC3000 network
4818 module on the Freescale Freedom-KL25Z board from Alan Carvalho
4821 * kconfig-fronted Configuration:
4823 - Conversion of old configurations to use the kconfig-frontends
4824 tool is an ongoing effort that will continue for some time.
4826 to use the kconfig-frontends tools.
4828 Bugfixes (see the ChangeLog for details). Some of these are very important:
4832 - ROMFS: Fix an error where long (>15) file names were read
4834 - NXFFS: Clean up some compiler warnings.
4838 - MMC/SD driver: Correction for a bad return value when multiple
4840 - USB HID keyboard and mass storage host-side class drivers: Fix some
4841 compilation errors and warnings when pre-allocated data structures
4843 - USB device-side class drivers: Fix some compilations errors when
4844 DUALSPEED (i.e., full- and high-sped) support is enabled.
4845 - CDC/ACM and PL2303: Don't use max packetsize assigned to the endpoint
4848 been configured. Really only an issue for high-speed endpoints.
4849 - USB Host Mast Storage Class: Fixed a problem that was causing some
4854 - USB Host Mast Storage Class: Correct a reference counting error:
4855 When an MSC device transfer fails while waiting for UnitTestReady,
4859 - USB Device CDC/ACM: Fix backward conditional compilation in the
4860 CDC/ACM driver with regard to remote wakeup and self-powered
4865 - ARP IP harvesting: Correct backward condition in netmask task.
4867 - Network connection monitor: Fixes a race condition where a loss of
4870 - TCP/IP Backlog: Fix a critical bug in the TCP/IP backlog
4873 - ENC28J60: Fixes and improvements back-ported from the ENCX24J600
4878 - STM32 I2C fixes for the STM32 F3 family from John Wharington.
4879 - STM32 I2C Correct an error that crept into the STM32 F1 I2C
4881 - STM32 F4: Added some missing CONFIG_SERIAL_TERMIOS support; Fixed
4883 - STM32 SDIO: If CONFIG_SDIO_BLOCKSETUP defined, OS would crash. Now
4886 - STM32 I2C Timers: Some CCER bit settings changed. Submitted by
4888 - STM32 CAN: Fix access to CAN filter registers. From the PX4 team
4890 - STM32 Kconfig: Fix STM32 UART7/8 Kconfig names and UART DMA. From
4895 - Fix #endif with missing #if in USB host header file. Reported
4900 - Corrected DMA-related problems: Bad register definitions, parameters
4902 - Correct a race condition in the HSMCI driver when an interrupt
4903 occurs before the wait for the interrupt begins.
4904 - Peripheral clock setup: Correct a typo in a register name.
4908 - Order of some operations changed in boot-up logic to defer
4910 - Correct handling of spurious interrupts.
4914 - KL25Z SPI: Correct typo in name of a function. From Alan Carvalho
4919 - apps/examples/composite: Fix a typo that can cause a configuration
4921 - apps/examples/pwm: Clean-up some configuration confusion.
4922 - apps/netutils/dhcpd/dhcpd.c: Fixed calculation of the next lease
4924 - apps/examples/usbmsc: Don't try to control USB trace if we are
4925 an NSH built-in task. In that case our attempts are inadequate
4928 - apps/examples/usbmsc: IMPORTANT bug fix: Change how the msconn
4930 This was because the USB MSC start-up logic creates a pthread;
4934 a pthread, but we are stuck with that for now. The work-around
4937 - apps/nshlib: Fix NSH listing output for the case of a single file.
4940 NuttX-6.31
4941 ----------
4944 and is available for download from the SourceForge website. Note
4945 that release consists of two tarballs: nuttx-6.31.tar.gz and
4946 apps-6.31.tar.gz. Both may be needed (see the top-level nuttx/README.txt
4947 file for build information).
4953 - Standardized stack checking logic so the interfaces can be used
4958 - Ken Pettit has finally released his long awaited audio subsystem.
4959 This is a generic audio subsystem that is appropriate for the
4962 - Ken Pettit's VS1053 audio CODEC driver is now functional.
4966 - Add the prefix ETH0 to all PHY configuration selections. This
4969 - Add MII/RMII PHY definitions for the Micrel KSZ8051 PHY.
4970 - Add GMII/GRMII PHY definitions for the Micrel KSZ9021/31 PHY.
4971 - New network-optimized, higher-performance sendfile() implementation
4973 - Added a simple routing table. This table is currently only used (1)
4974 when we need to look-up an Ethernet device based on an IP address,
4977 - Make net_close() nonblocking and free unestablished connections if
4978 no free connections available. From Max Holtzberg.
4979 - Changed the meaning of the uip_*input functions. They now return
4980 success when a packet is dropped; This is needed for the ENCX24J600
4983 - David Sidrane has completed integration of the CC3000 networking.
4985 replacement for the NuttX networking with off-chip networking support
4987 - Numerous enhancements to the ENCX24J600 driver from Max Holtberg.
4991 - The SST25 serial FLASH MTD driver now includes support for the
4993 - Add a preflight method to the SDIO interface to support the STM32
4995 - Enhanced the MMC/SD SDIO driver to perform DMA preflight operations
4998 - Add an ioctl command that can be used to trigger ADC/DAC conversion
5003 - Enhanced the FAT32 filesystem code to understand DMA preflight
5005 a user-supplied buffer is not suitable for DMA. From Mike Smith.
5009 - Add support so that subsets of the total DRAM (and other external
5010 memory) can be added to the heap, leaving other memory reserved for
5015 - Use more descriptive task names when starting the EHCI and OHCI
5017 - Added a 10/100Base-T Ethernet (EMAC) driver.
5018 - Added a 1000Base-T Ethernet (GMAC) driver.
5019 - Added a Real Time Clock (RTC) driver and integrated with the NuttX
5021 - Added support for /dev/random using the SAMA5D3x True Random Number
5023 - Added a Watchdog Timer (WDT) driver.
5024 - Added a Timer/Counter (TC) library with interface that make be used
5026 - Added an ADC driver that can collect multiple samples using the
5029 - Added a touchscreen driver based on the special features of the
5031 - Added an LCD controller (LCDC) frame buffer driver.
5032 - Added a CAN driver. However, testing has been delayed because of
5034 - Basic header file support is available for the Image Sensor
5038 * Atmel AT91 SAMA5D3x-EK Development Boards
5040 - Add OS test support for the FPU test.
5041 - Enable the task name feature board configuration sto provide
5043 - Added NX and NxWM configurations to verify the LCD and touchscreen.
5046 - The TRNG and /dev/random are now enabled by default in the demo
5051 - Add configuration to select revision 3 of the Arduino Due which has
5056 - Add support for the STM32F207ZE chip. From Martin Lederhilger.
5060 - Add configuration for the Spark Core. The initial check-in is
5064 - Support for the Olimex STM32 P207 board added by Martin Lederhilger.
5065 - Configuration for the Mikroe STM32F4 board configuration updated for
5070 - zkit-arm-1769: LED1 is now user controllable after booting. From
5075 - PIT and TPM register definitions header files for the from Alan
5077 - Added low-level getc() function for operation with no file system.
5083 - A new configuration called minnsh was added is an experiment to
5089 - Basic board support for the Motorola C139 (Compal E86) phone. From
5094 - Moved several useful examples from apps/examples to apps/system.
5096 - New addroute and delroute commands added to NSH in order to manage
5098 - Numerous enhancements and updates to the CC3000 example from David
5100 - Add a new stack monitor daemon that can be used to constantly
5102 - Numerous changes to get NSH working with no file system. Basically
5104 low-level console read/write functions. Suggested by Alan Carvalho
5106 - apps/system/nxplayer: A new, command-line media player called
5108 - apps/examples/random: Add a simple test that dumps values from
5110 - apps/examples/adc: Add support so that a ADC driven by software
5115 - The MKDEP tools now support a new argument that identifies the
5122 * kconfig-fronted Configuration:
5124 - Conversion of old configurations to use the kconfig-frontends
5125 tool is an ongoing effort that will continue for some time.
5127 to use the kconfig-frontends tools.
5129 Bugfixes (see the ChangeLog for details). Some of these are very important:
5133 - IDLE thread initialization logic should not call group_setupidlefiles()
5134 if there are no file descriptors (and, hence, no file system).
5135 - Fix some cornercase error handling logic: If sched_releasetcb() is
5142 - Look up of a device using subnet will fail if the packet is being
5147 - Fix some backward conditional logic in send() that enabled the
5149 - Notify the socket layer from the network monitor if a connection is
5152 - send(): Reset the send timeout when the data is ACKed, not when the
5153 data is sent. Remove conditions on checking for timeout. From Max
5155 - Correct how the TCP/IP initial minimum MSS is calculated. Max
5157 - TCP state machine: Move tcp connection into SYN_RCVD state after
5160 - Numerous fixes to the ENCX24J600 driver from Max Holtberg.
5164 - Change naming of SELFPOWERED and REMOTEWAKEUP to avoid name
5165 collisions. Prepend the name of the driver (for example
5167 - CDC/ACM class driver: Change the interval for the interrupt
5172 * ARM Cortex-A5:
5174 - Fix an error in data cache clean and invalidate functions: Fix of
5179 - Correct some inconsistencies in the way that USB configuration
5182 - When 480MHz UPLL is used to drive OHCI, it should have a divider
5184 - OHCI HCD: Fix a place where DMA-related data needed to be flushed
5187 - HSMCI Driver: TX DMA disabled. It is just not reliable. No idea
5189 - STM32F103C pinmapping corrections from David Sidrane.
5191 * Atmel SAMA5D3x-EK Board
5193 - Increase the number of pre-allocated watchdog timers. The default
5199 - STM32 F4 DMA definitions: Typo fixes for UART7 and UART8 DMA
5201 - DMA priority configuration corrections from Mike Smith.
5202 - Changes to the stm32_dmacapable API. In order to correctly
5204 the CCR value are required. Implemented stm32_dmacapable for
5205 stm32f1xx devices. Enhanced stm32_dmacapable for stm32f2xx and
5206 stm32f4xx devices to check for additional conditions that will cause
5208 - STM32 F1 DMA fix from David Sidrane: The DMA_CNDTRx register
5213 - Fix compilation errors from bad bit definitions in ADC and PWM
5215 - DMA-related fixes to the SPI driver from Ken Pettit.
5219 - Remove undefined spi_select() prototype. This was causing compile
5224 - zkit-arm-1768: MMC/SD is on SPI, not SSP0. From Rashid Fatah.
5228 - scanf() fixes from kfrolov: 1) sscanf() function hangs in the
5237 - Dependency generation generation was broken for directories that
5238 keep objects in a sub-directory. The MKDEP tools now support a new
5240 - tools/define.sh: 'cut' no longer works as it once did. Script
5245 - Remove a warning from the NSH library when DHCP is not enabled.
5246 - Default NSH IP address should be 0x0a000001 (10.0.0.1), not
5247 0xa0000001 (160.0.0.1). Ditto for the gateway.
5248 - Add some missing options to the OS test Kconfig file
5249 - Fix some bad conditional compilation in the USB monitor.
5250 - Fix default I2C frequency used by the I2C tool: 400KHz instead
5252 - Increase stack size for the system/info command. Ken Petit
5256 - apps/Makefile: Needs to include external/Make.defs if we want
5259 - apps/netutils/telnetd: Missing argument to debug statement
5262 - apps/examples/can: Correct an error in a debug statement. From
5265 NuttX-6.32
5266 ----------
5269 and is available for download from the SourceForge website. Note
5270 that release consists of two tarballs: nuttx-6.32.tar.gz and
5271 apps-6.32.tar.gz. Both may be needed (see the top-level nuttx/README.txt
5272 file for build information).
5278 - Extension and standardization of stack debug logic. Now includes
5284 - I2S interface definition. Integrates with audio sub-system.
5285 - VS1053 worker thread stack size is now configurable and assigned a
5290 - Updates and adaptations to support for TI CC3000 wireless module
5291 from David Sidrane. These updates include multi-threading support
5297 - procfs: Add support for a tiny procfs file system. The initial
5300 - NXFFS: An initial attempt was made to integrate NXFFS with the NAND
5303 is re-writes blocks is incompatible with the NAND ECC handling.
5304 These changes were backed-out so as not to introduce turmoil, but
5305 can be re-enabled if needed via configuration option.
5306 - NXFFS: Make the start up scan of the media a configuration option.
5313 - I2S: A simple character driver was added to support I2S accesses.
5315 testing and would not be appropriate to used for any real driver
5320 - Add a container for an MTD device that can be used to provide a
5324 - New interface definition for lower half NAND drivers.
5325 - MTD Nand: Add MTD NAND driver that will support ONFI devices,
5326 non-ONFI devices (via table lookup), bad block checking, software
5327 ECC (Hamming), and will interact with the lower-half, hardware-
5328 specific, NAND driver. Based on BSD-compatible Atmel sample code.
5329 - MTD geometry structure is now packed so that it can support larger
5332 - SST25: Add another SST25 SerialFlash driver, sst25xx.c. This one
5339 - STM32 F1 USB Device: Add support for decoded USB trace strings.
5344 - Add more ARM9 cache management functions to flush and invalidate
5345 D-Cache for DMA support.
5349 - Many new drivers including CAN, PWM, SSC/I2S
5350 - PCK: Add support for programmable clock outputs.
5351 - NAND: Driver with hardware ECC and DMA support
5355 - SAMA5D3x-EK: Add support for the apps/examples/i2schar test.
5356 - SAMA5D3x-EK: Provides board-specific memory controller initialize
5357 for NAND flash.
5358 - SAMA5D3x-EK: Add support for "auto-mounting" NAND MTD block driver
5363 - Basic support for the Atmel SAM4E family. From Mitko.
5367 - Added support for the STM32F429. From Ken Pettit.
5368 - Added support for GPIOK and GPIOJ. From Ken Pettit.
5372 - STM32 F4 OTG FS/HS Device: OTG FS device and host drivers extended
5376 - Added header files and driver framework for the STM32F429 LTDC
5381 - Support for the Spark board was completely by Davide Sidrane. The
5386 - The Mikroe-stm32f4 now uses /dev/config for configuration data
5388 - Added support for the STM32F429I-Discovery board from Ken Pettit.
5389 - Added board support for the ViewTool STM32F103/F107 board with the
5394 - USB ECHI HCD: Add a driver for the low-/full-/high-speed variant
5399 - Board-specific USB host support for the Embedded Artists EA3131 board.
5401 - Add support for the Olimex LPC-H3131 board. Including USB host
5406 - PWM driver for the Freescale Kinetis KL family from Alan Carvalho
5411 - Freedom-KL25Z: Add PWM support from Alan Carvalho de Assis.
5415 - Don't initialize .data in start-up logic if not running from FLASH.
5419 - apps/platform: A new home for platform-specific application code.
5420 - Define a common interface that can be used to manage platform-
5422 - apps/examples/configdata: A unit test for the MTD configuration
5424 - Aapps/platform/mikroe-stm32f4: dd platform-specific storage of
5425 configuration data for the Mikroe-stm32f4. From Ken Pettit.
5426 - apps/examples/cc3000: Fine tuning of memory usage from David Sidrane.
5427 - apps/system/nxplayer: Play thread stack size is now configurable.
5430 - apps/examples/i2schar: The I2S test based on the I2S character
5432 - apps/examples/hidkbd/hidkbd_main.c: Now calls a function named
5433 arch_usbhost_initialize() that must be provided by the platform-
5435 - NSH:
5437 - hexdump: Add skip= and count= options to the hexdump command. From Ken Pettit.
5438 - Allow USB trace without a USB console. From David Sidrane.
5439 - Mount command updates from Ken Pettit.
5440 - Add an option to the mkfatfs command to specify FAT12, FAT16, or FAT32.
5444 - tools/mkctags.sh: A script for creating ctags from Ken Pettit.
5450 * kconfig-fronted Configuration:
5452 - Conversion of old configurations to use the kconfig-frontends
5453 tool is an ongoing effort that will continue for some time.
5455 to use the kconfig-frontends tools.
5457 Bugfixes (see the ChangeLog for details). Some of these are very important:
5461 - FAT: In one error return case, the error return value was not being
5463 - mount: SMART FS must be included in the conditional compilation for
5466 - SmartFS: Fixed a minor bug with SMART partition number reporting
5467 that would only be seen if both partition support and multi-root
5469 - Deadlock: The inode semaphore must be re-entrant. Here is the re-
5477 deadlock if the inode semaphore is not re-entrant.
5478 - FAT: Fix a typo in the FAT16 formatting logic. Was this ever able to
5483 - MTD Partitions: Fix erase block vs page block confusion. From Ken
5485 - SST25 Serial Flash: Improved write performance by fixing a bug that
5490 - USB MSC Device: pthread_join() does not work if called from a
5494 Sidrane plugs the hole for now.
5495 - USB CDC/ACM, USB MSC, and Composite Device Classes: Un-initialization
5496 logic caused re-use of a stale pointer. Changed to a two pass
5497 un-initialization for the case of the composite driver: Memory
5498 resources are not freed until the second un-initialization pass.
5503 - STM32 F1 USB Device: Fix some errors that cause crashes when the USB
5505 - STM32 F1 USB Device: Correct EP0 state handling logic when buffers
5507 - STM32 F1 USB Device: The long outstanding bug involving the handling
5510 - Kconfig: Add missing setup of CAN TSEG1 and TSEG2 values. From
5515 - tools/mkconfig.c: SMART FS must be included in the conditional
5516 compilation for the set of writable file systems. Noted by Daniel
5521 - apps/platform/Makefile: Was not dealing with the bin sub-directory
5523 - apps/system/composite/composite_main.c: The wrong handle was getting
5526 NuttX-6.33
5527 ----------
5530 and is available for download from the SourceForge website. Note
5531 that release consists of two tarballs: nuttx-6.33.tar.gz and
5532 apps-6.33.tar.gz. Both may be needed (see the top-level nuttx/README.txt
5533 file for build information).
5539 - nanosleep() added. sleep() and usleep() are no longer core OS
5540 interfaces. These have been moved into the library and re-implemented
5545 - procfs restructured by Ken Pettit. Added files for MTD status.
5546 - procfs extended to show uptime and task group status.
5547 - procfs now shows stack information.
5551 - Add support for the SO_LINGER socket option. Extended from logic
5553 - TCP write buffering support added. From Jason Jiang.
5554 - Changes from Max Holtzberg to improve how network status is
5559 - Massive reshuffling of files with little or no logic changes. This
5565 * Cortex-A5/A8/A9
5567 - Existing Cortex-A5 support updated to include Cortex-A8/9.
5568 - Add the syscall.h header file needed for the Cortex-A architecture.
5569 - Start-up logic now supports execution from FLASH with .data and
5575 - Basic support for the Allwinner A10 (Cortex-A8) is in place.
5579 - Support for the pcDuino v1 board has been added. This support
5586 - Start-up logic now supports execution from FLASH with .data and
5592 - Partial logic in place to support the OV2640 camera. Still needs
5595 * ARMv7-M
5597 - Add support for high priority, nested interrupts. This change
5598 effects not only core ARMv-7M logic, but all ARMv7-M MCU logic:
5604 - Add clocking support for STM32F107 USB OTG FS (which does not yet
5606 - Single-wire UART support for the F1 series from Thomas Grubler.
5610 - The Viewtool board can now be configured to support either the
5612 - The Viewtool STM32F107VCT6 now supports networking with the
5614 - Add support for Viewtool SSD1289-based LCD on the Viewtool
5616 - Add support for the XPT2046 touchscreen controller on the Viewtool
5618 - Added kernel mode build support for the STM3240G-EVAL board. Added
5620 - C++ static constructor logic from the nuttx/configs/stm3240g-eval/
5621 directory to the apps/platform/stm3240g-eval/up_cxxinitialize.c
5622 where is belongs so that it is available in user-space in the kernel
5624 - Add native Windows build support for the Olimex STM32 P107. From
5626 - Support for the STM32VL-Discovery board. Contributed by Alan
5628 - Added a configuration for testing simple configurations on the
5633 - Add an NSH configuration for the Z16F2800100ZCOG ZNEO board.
5634 - Added support for the Toyaga 16Z ZNEO board. The 16Z board is
5636 https://github.com/toyaga/16z for further information
5637 - Developed a patch to work around a compiler error that is revealed
5640 * Architecture-Independent Drivers
5642 - OV2640 Camera Driver.
5643 - Support for the Sharp Memory LCD from Librae.
5647 - Pattern matching logic extended to handle set of characters and
5649 - sleep() and usleep() moved into the C library. These are not
5650 longer core OS interfaces; they are simple wrappers for the
5652 - Add an implementation of gets_s().
5653 - Extend fopen() to include support for C11 exclusive open ("x")
5655 - Add an implementation of stpcpy()
5656 - strtol(), strtoll, strtoul(), strtoull(), and strtod() from
5661 - Add rsize_t to include/sys/types.h
5662 - Add the C11 thread.h header file
5666 - Top level Makefile now supports qconfig and/or gconfig targets that
5667 may be used for configuration. These may be used if you build
5668 kconfig-frontends with support for kconfig-qconf and/or
5669 kconfig-gconf.
5670 - Add CONFIG_DEBUG_NOOPT. Now you can independently enable/disable
5672 - File system related header files moved to include/nuttx/fs
5673 - Video related header files moved to include/nuttx/video
5674 - Changes for native Windows build: fix creation of a .version file
5677 - Board configuration sub-directory can now be specified. The default
5679 is selected and there is no meaningful default sub-directory.
5680 - Many functions renamed to better conform with the naming standard:
5690 - NSH: Refactor. Separate NSH command handling and command execution
5692 - NSH: Will now support multiple commands on a command line, each
5693 separated with a semi-colon.
5694 - NSH: Add support of commands enclosed in back quotes as command
5696 - NSH: Can now handle arguments that are concatenations of constant
5699 - NSH: Add true and false commands.
5700 - NSH: Add support for while-do-done and until-do-done loops. These
5704 - NSH: Loosen up if-then-else-fi syntax to allow a command to be on
5707 - NSH: Add a break command that can be executed with a loop to
5710 - system/inifile: A simple .INI file parser.
5711 - system/vi: Add support for a tiny, VI work-alike editor. This is
5719 * kconfig-fronted Configuration:
5721 - Conversion of old configurations to use the kconfig-frontends
5722 tool is an ongoing effort that will continue for some time.
5724 to use the kconfig-frontends tools.
5726 Bugfixes (see the ChangeLog for details). Some of these are very important:
5730 - Added missing sem_timedwait() system call.
5734 - Prevent tcp_connect callback from being double freed. From Max
5736 - uiplib: Support new definitions and state passing for network
5741 - FAT: (1) A correction to FAT cluster allocation, and (2) Fix to some
5742 root directory logic that was conditionally done only for FAT 32.
5743 Apparently this needs to done for all FAT types. Both from Andrew
5748 - Fix a small memory leak when attempting to load a program from a file.
5750 * Cortex-A8/9
5752 - Fix some errors in the cache invalidation logic (only seem to matter
5753 for Cortex-A8).
5754 - Add more nop's after enabling the MMU. The cortex-a8 seems to need
5759 - Fix a typo that caused a compilation error when
5762 * ARMv7-M
5764 - Correct alignment of RAM vector table.
5765 - Interrupt handling: Do not disable and enable the IRQ on each
5769 - Fix all implementations of up_disable_irq() for all Cortex-M3 and
5770 M4 architectures: To enable an interrupt on the Cortex-M3/4 CPU,
5775 register has no effect. That means that up_disable_irq() was
5777 because up_disable_irq() is not really used for that purpose. But
5779 turned out to be the cause in that case. Thanks to Manuel Stühn for
5784 - Fix configuration and pin definitions that would prevent building
5785 USB for the connectivity and performance lines.
5786 - STM32L15xx: Fix a typo in USB pin definitions
5787 - Fix pin definition names for SPI2 MOSI and MISO. Noted by Brian Webb
5788 - Various fixes for STM32F103ZE SPI3 pin mapping definitions. From
5793 - Olimex STM32-P107: Failed to build if SPI3 for UEXT is not remapped.
5798 - Add a configuration option to select the -m32 compiler option when
5799 building for a 32-bit target on a native 64-bit compiler. So far,
5800 only used for the qemu/i486 configuration.
5801 - Patch from Matt Campbell to fix 'Error: .size expression for idle_stack
5806 - strftime(): Needs null termination on the generated string. From
5808 - Typo in ctype.h macro name: iscntrl(), not iscontrol().
5809 - If there are no arguments (argc == 1), then getopt() will leave the
5810 optind variable in an undefined state (2014-1-20).
5811 - ARMv7-M memcpy(): Assembler changes with the gcc-47 distribution
5818 - Fixes for some tools/ for Windows build issues from Max Holtzberg.
5819 - Config.mk: 'cypath' must be called if we are using a Windows native
5822 - ARM Makefile: Dependency directory list is now computed from the
5824 - builtin/Makefile: Fixes for native Windows build from Max Holtzberg.
5825 - Refactor some configuration dependencies: NSH networking features
5831 - NSH: Modified the df -h logic to eliminate truncating numbers in
5832 conversion (like 7900 -> 7M). From Ken Pettit.
5834 NuttX-7.1
5835 ---------
5838 and is available for download from the SourceForge website. Note
5839 that release consists of two tarballs: nuttx-7.1.tar.gz and
5840 apps-7.1.tar.gz. Both may be needed (see the top-level nuttx/README.txt
5841 file for build information).
5846 release. In this case, the legacy, manual configuration is no longer
5848 newer configurations generated by the kconfig-frontends tools will generate
5853 for you board, you will need to convert those configurations to use the
5854 kconfig-frontends tools before taking any new code from the repository. See
5855 …s://cwiki.apache.org/confluence/display/NUTTX/Converting+Legacy+Configurations+to+Use+kconfig-mconf
5856 for some guidelines.
5862 - System time logic now includes logic to measure and calculate the
5864 extended to keep counts on each thread. The per-thread CPU is
5867 for more accurate measurements when needed.
5871 - As mentioned above, the per-thread CPU load information is now
5873 - Many file system interfaces have been extended to operate on the
5874 top-level NuttX pseudo filesystem. These include rmdir, mkdir,
5881 - Numerous updates and improvements to the CC3000 driver from David
5886 - Defined a mouse interface that is very similar to a touchscreen
5889 with no button is pressed so that the mouse position can drive a
5891 - Added support for a USB HID boot mouse device. Cursor support is
5894 - Support added for the MIO283QT9A LCD from Toby Duckworth.
5898 - Added complete architecture support for the Atmel AT91 SAM4E
5899 Cortex-M4F parts.
5903 - Add board support for the SAM4E-EK board.
5907 - Added logic to manage the Cortex-M Cache Control block.
5908 - Developed and integrated an Ethernet MAC driver for the SAM4E.
5909 - Backported the SAMA5 SPI driver to the SAM3/4 architecture. The
5916 - Added basic architecture support for the Atmel AT91 SAM D20
5917 Cortex-M0+ parts.
5921 - Added basic support for SAM D2 Xplained Pro board. Currently, the
5924 stopped, however, in order to focus on the SAM4E-EK.
5928 - Added architecture support for the TI Tiva TM4C123G parts. This was
5929 merged into the existing support for the LM3S and LM4F families.
5934 - Added basic board support for the TM4C123G-Launchpad. As of this
5935 release the TM4C123G-Launchpad board support is untested and likely
5940 - The Mikroe STM32F4 can now support the newer MIO283QT9A LCD. From
5942 - Miscellaneous changes to better support FPU on STM32F429 Discovery
5947 - Incorporated I2C and SPI drivers for the LPC23xx from Lizhuoyi.
5951 - New QEMU keyboard and VGA drivers from Lizhuoyi.
5955 - Added a coding standards document. See
5960 - A configuration option, CONFIG_DEFAULT_SMALL, was added to select
5961 default values for configuration variables based upon whether you
5965 - CONFIG_DEFAULT_SMALL has been defined on all tiny MCU configurations
5968 - The legacy, manual configuration is no longer supported by the
5970 the kconfig-frontends tools will generate viable NuttX
5973 some older style configurations for you board, you will need to
5974 convert those configurations to use the kconfig-frontends tools. See
5975 …s://cwiki.apache.org/confluence/display/NUTTX/Converting+Legacy+Configurations+to+Use+kconfig-mconf
5976 for some guidelines.
5980 - NSH can now use an EMACS-like command line editor. This CLE, is
5983 - The touchscreen example can now be configured to work with either a
5985 - Several NSH commands can now be used to operate on objects in the
5986 top-level pseudo-filesystem: rmdir, mkdir, mv, and rm. This
5989 - If both the CPU load feature and the procfs features are enabled,
5993 Bugfixes (see the ChangeLog for details). Some of these are very important:
5997 - task_terminate() always returned an error because the return value
5999 - nanosleep() Fix a missing call to re-enable interrupts (from Jason
6004 - Fixed an error in the FAT logic that can cause file corruption. The
6006 Andrew Tridgell). This replaces a previous, partial fix for the same
6008 - Fixed memory leaks in the NXFFS open() and stat() implementations
6010 - The interfaces include opendir(), readdir(), et al, were modified so
6012 pseudo-directory.
6016 - Fix one place where the connection reference count was not being
6019 - Backed out a small part of the NuttX 6.33 write buffering changed.
6021 - In DHCPD, there was a place where the logic was calling ntohl()
6027 - Fixed cut'n'paste error that prevented UARTS2-7 from being used with
6029 - Fixed several errors there were unmasked with UARTs > UART2 are
6034 - Fixed cut'n'paste error that prevented UARTS2-7 from being used with
6039 - Fix an compilation error that crept into the LPC17xx USB host driver.
6043 - Fix cloned typo in the serial driver: FLOWCONTROL vs FLOWCONROL.
6044 - Disable SPI before changing DPI CR1 register (from David Sidrane).
6045 - stm32 TIM: Set the timer CCMR when selecting timer channel. From
6047 - Fix typo in a Makefile: stm32_pwm.c not stm32_psm.c. Noted by Max
6052 - More sscanf() bug fixes from David Sidrane.
6056 - cstdbool: Ignore _Bool8 if CONFIG_C99_BOOL8=y
6060 - Several changes to restore the broken native Windows build
6064 - Use strncpy vs strcpy in the Telnet console logic to avoid
6067 - Add a newline after printing the file in the 'cat' command. This
6069 of the file in the case where there is no newline at the end of the
6072 NuttX-7.2
6073 ---------
6076 and is available for download from the SourceForge website. Note
6077 that release consists of two tarballs: nuttx-7.2.tar.gz and
6078 apps-7.2.tar.gz. Both may be needed (see the top-level nuttx/README.txt
6079 file for build information).
6085 - Add support for CLOCK_REALTIME. From Macs N.
6089 - Add a very primitive NTP client.
6090 - DNS resolver: Long needed major clean up for coding style and
6095 - Add a new MTD driver that can be used to contain another driver and
6097 - If DCD can support queuing of stall requests, then the USB MSC stall
6099 - Redesign threading module used with the USB MSC driver. It was using
6101 for this has to do with task grouping: A pthread is a memory of the
6106 - Update the MIO183QT-9A LCD driver to support reading from the LCD.
6108 - Timer "upper half" driver and l"lower half" interface definition from
6113 - All SAM4E configurations updated to run with 120MHz CPU speed and
6115 - Support for the SAM4S Xplained Pro board from Bob Doiron.
6116 - Add watchdog driver. From Bob Doiron.
6120 - Add a USB full speed device driver (UDP) for the SAM4E.
6121 - Add support in HSMCI and SPI drivers to invalidate cached memory if
6123 - Add logic to handle SPI word widths > 8
6124 - Port RTC driver from SAMA5 to SAM3/4. From Bob Doiron.
6125 - HSMCI: Extensions from Bob Doiron needed to support PDC-based HSMCI
6130 - Add support for the SAMA5D36 chip.
6131 - Add functions to calculate PLLACK, PCK, and MCK frequencies given
6133 - Implemented RAM functions. When booting directly into NOR flash,
6141 - Add support for the SAMA5D3 DBGU.
6145 - Add a board support configuration for the Atmel SAMA5D3 Xplained
6146 board running out of SDRAM. When booting from SDRAM, start-up logic
6148 - For all SAMA5 boards, added support for 528MHz clocking.
6152 - Modify the logic to disables the interrupts and sets the default
6160 - Add support for the STM401RE. From Frank Bennett.
6164 - STM32F4Discovery: Add support to register keyboard and mouse
6166 - Add support for the Nucleo-F401RE board. From Frank Bennett.
6170 - Add STM32 Ethernet IGMP hashing support. From Manuel Stühn.
6171 - OTG FS Host: USB host tracing added by Leo.
6175 - Modify the logic to disables the interrupts and sets the default
6183 - Modify the logic to disables the interrupts and sets the default
6191 - Added ZNEO ESPI driver.
6195 - Finish incomplete support for ferror(). From Macs N.
6199 - UsbTrace.html: Add some discussion of the USB monitor.
6203 - compiler.h: Add macro UNUSED() that can be used to eliminate
6209 - Add a configuration option to enable dumping of the USB trace buffer
6214 - IGMP Example: Fill out Kconfig file; update makefile so that the
6215 IGMP example can be used as an NSH built-in application. From Manuel
6217 - lcdrw Example: Fill out empty Kconfig file.
6218 - touchscreen Example: Add a configuration option to indicate if
6219 architecture-specific initialized is required, yes or no.
6220 - System usbmsc: Back out the USBMSC daemon... it is no longer needed
6222 - NSH: malloc/free IOBUFFER for 'cat' and 'hexdump' commands instead of
6224 - cpuhog, serialblaster, and serialrx Examples: Stress test examples
6227 Bugfixes (see the ChangeLog for details). Some of these are very important:
6231 - errno_get_errno_ptr() and getpid(): Add some checks. If these
6237 - IGMP-related bug fixes from Manuel Stühn.
6238 - In netdev_findbyaddr(), skip network devices that are in the "down"
6244 - DHCPD: The correct value of the PAD option. Should be zero, not
6246 - Corrections to the NTP client from Manuel Stuehn.
6250 - usbhost.h: Fix some USB HID-related conditional compilation. From Leo.
6251 - USB HID mouse driver: Don't include NAKs from the device in the error
6256 - Add corrected control logic for TM4C125GXL based on logic from Daniel
6262 - STM32 F2 SPI: Correct a mapping for SPI MOSI pin. From dlsitzer.
6263 - OTG FS Host: Fixes related to low-speed devices and interrupt
6266 - STM32 SDIO: The dmaflight method must be conditioned on
6268 - Sourceforge Ticket #26. up_prioritize_irq should not be called
6273 - Fix some backward conditional compilation in the start-up logic.
6274 - Fix initialization of the default interrupt priorities. This is
6276 - SAM4S: Fix error in macros that disable peripheral clocking. From
6281 - Fix double mapping of SDRAM when executing out of SDRAM. In this
6283 - In clock configuration, the BMS bit handling was fixed to match
6285 - TLB Bufferable bit did not do what I thought it was going to do.
6286 I though I was selecting a write-through cache, but the result was
6288 - Move the un-definitions of __ramfuncs__ from the clock configuration
6290 differently for the prototype and the function definition.
6295 - Fix a case in the UDPHS driver where received status was not being
6297 - TWI data sending fails to increment the number of bytes transferred
6299 - If running from SDRAM, then BOARD_MCK_FREQUENCY is not a constant
6301 EXCEPT for the PWM and Timer/Counter drivers which will need some
6306 - SAMA5D3x-EK: The red LED is controlled by PE24 which is also the
6310 - Header files reference type xcpt_t in certain configurations and
6316 - arm/src/lpc17xx/Kconfig and lpc17_ethernet.c: The default interrupt
6317 priority should be default, not the highest priority (2014-4-19).
6321 - Fix calculation of timer reload and prescaler. The timer frequency
6326 - strncpy(): Change ordering of test and copy. Logic would have
6328 for the end of the copy.
6329 - Fix a counting error in the return value from sscanf(). Noted by
6330 kfrolov. Also, sscanf() should return EOF if no values were
6332 - Fix a logic error in ftell(). It was simply using the file offset
6334 - sccanf(): Use stroul() vs strol() with %u format otherwise, range
6339 - Fix a build error that occurs when only USB device tracing is enabled.
6343 - Fix NuttShell version number display in the NSH welcome message.
6348 - sysinfo: CONFIG_VERSION_BUILD is a string an needs to be
6350 - nxplayer: Compilation failure in one configuration reported by
6352 - System sdcard: Remove an STM32 dependency. From Bob Doiron.
6353 - telnetd Example: Naming is confused. In someplaces 'telnetd',
6357 NuttX-7.3
6358 ---------
6361 and is available for download from the SourceForge website. Note
6362 that release consists of two tarballs: nuttx-7.3.tar.gz and
6363 apps-7.3.tar.gz. Both may be needed (see the top-level nuttx/README.txt
6364 file for build information).
6370 - Dynamic loader: Framework to support Pascal P-Code as a binary
6372 - Dynamic Loader: Extend the binfmt interface to handle error
6373 conditions where format-specific clean-up is needed in the event
6374 of error conditions. This is needed by the P-Code binfmt.
6378 - IOB: Add a generic I/O buffer chain logic. This logic uses small,
6379 pre-allocated buffers that can be chained together to support
6384 - TCP Write Buffering: TCP write buffering logic converted to use
6386 - TCP Read-Ahead Buffering: TCP read-ahead buffering logic converted
6388 - Includes logic to support throttling of read-ahead buffering if
6389 the read-ahead buffering is competing with write buffering for
6391 - Raw Sockets: Add support for the AF_PACKET socket family. From
6396 - W25 Serial FLASH driver extended by Mark Whitehorn to support the
6398 - Add support for Fujitsu MB85RS1MT RAMTRON part. From Charles Ash.
6399 - Enhancements to the generic timer interface to support capture mode
6401 - Add an rxflowcontrol method to the serial interface to better
6402 …on changes in addition to minor updates to all MCU-specific serial drivers (only fully implemented…
6406 - Add support for the SAM4CM family. From Max Neklyudov.
6410 - RTT driver from Bob Doiron. Also added high resolution RTC
6411 emulation using the RTT for the sub-second counter.
6415 - The SAM4S Xplained Pro now uses the extended timer/counter
6417 - Added a touchscreen and LCD driver for the SAM4E-EK board (the LCD,
6422 - Optimized, high performance, assembly language memcpy(). This is
6424 for the ARMv7-M with minor tweaks by David Sidrane to work with
6425 the ARMv7-A.
6426 - Basic support added for the SAMA5D4 family.
6430 - SAMA5D4: New drivers unique to the SAMA5D4: XDMAC, SAIC, and
6435 - SAMA5D4-MB: Initial board support for the SAMA5D4-MB/EK boards.
6439 - Add support for the STM32152 and STM32162 Medium+ density parts
6445 - Support for the Olimex STM32 H405 board contributed by Martin
6450 - Implement the rxflowcontrol method to the serial interface to better
6455 - Added support for the RTC, ADC, DAC, Timers, PWM and MCPWM
6460 - Support for the RTC, ADC, DAC, Timers, PWM and MCPWM integrated
6465 - Add support for seek-able streams.
6469 - Restructured network directories, header files, and naming to
6475 - prun: An NSH built-in application that can be used to run
6476 Pascal P-Code programs either programmatically or from the NSH
6478 - netpkt: A "raw" socket test from Lazlo Sitzer.
6479 - hex2bin: A library and built-in task to convert from
6480 …inary data to a file or it can store the binary data to memory (to support, for example, a loader).
6482 …st critical bugfixes are listed here (see the ChangeLog for the complete list of bugfixes and for …
6486 - Dynamic Loader: Fix an error in a symbol table search function.
6488 - Dynamic Loader: Fix a critical error in exec(); argv was not
6490 - mq_notify: Test for a valid signal number was inverted; this
6493 - Fix typo in conditional compilation: CONFIG_CLOCK_MONOTONIC vs.
6498 - Fix typos in several RGB conversion macros.
6502 - Modify TCP timeout handling to provent situations where connections
6504 - Improved TCP fallback allocation logic from Max Holtzberg. Also,
6507 - Write Buffering: Add checks from buffer allocation failures. From
6512 - webserver: httpd_fs_open() should return OK on success and ERROR on
6517 - Make sure that all references to up_prioritize_irq() are
6519 - CC3000: Correct SPI mode for CC3000 is CPOL=0 CHPA=1. From Jussi
6521 - CC3000: Fix a race condition in thread start-up logic. From Jussi
6523 - CC3000: Additional fixes including a compilation failure if POLL is
6528 - CDC/ACM and PL2303 device: Reset RX head to avoid resending last
6529 serial data when USB cable disconnected/re-connected. From
6534 - The Nucleo-F401RE has no on-board crystals and, hence, needs to run
6535 with the PLL input from the on-chip HSI clock.
6539 - Serial: Handle configuration for the case of 8-bit data with
6544 - There was a cloned error in all SAM3/4 board configurations (and
6545 for a few other architectures as well). Button interrupts not
6552 - Fix some critical typos in the SAMA5D3 DMA definitions.
6556 - I2C: Add an alternative I2C implementation for the STM32 F103 that
6558 - RTCC: Add retry logic to RTC initialization. It sometimes takes
6559 longer for the RTC to initialize, at least as noted on an F2 part.
6564 - GPDMA: Fix an error when DMA is started: The read-modify-write
6572 - snprintf(): If the size passed to snprintf() is zero, then
6578 - The alternate console device CONFIG_NSH_CONDEV must not be defined
6583 - Many files: Convert all old-style GCC variadic macros to the C99
6585 some problems (at least for the IAR compiler for some reason).
6587 - tools/configure.sh: In-place SED edit messes up permissions on
6592 - tools/mkfsdata.pl: Apparently, the trailing the 0x00 in http
6598 - I2C Tool: Fix to show the updated register address on each
6601 - CLE was not returning the terminating newline character. But
6604 NuttX-7.4
6605 ---------
6608 and is available for download from the SourceForge website. Note
6609 that release consists of two tarballs: nuttx-7.4.tar.gz and
6610 apps-7.4.tar.gz. Both may be needed (see the top-level nuttx/README.txt
6611 file for build information).
6617 - Beginnings of a crypto/ subsystem from Max Neklyudov
6618 - Tickless operation: NuttX now supports a mode with no periodic
6624 - Restructured the OS files under sched/ to better support the already
6629 - Substantial directory and header file reorganization and renaming to
6631 - Add network device ioctl to access PHY registers. From Daniel Lazlo
6636 - Various changes associated with symbol tables from Pelle Windestam.
6640 - colorcmp(): New utility to compare two colors.
6641 - The initial background color is now configurable. Includes logic to
6643 - Minor configuration changes to handle mouse X/Y and touchscreen
6648 - SmartFS: Increase some variables from uint16_t to uint32_t to handle
6650 - Add configurable AES encryption support to the block-to-character
6653 - Add an MTD layer that will add read-ahead or write buffering to any
6655 - Automounter: Add support for an auto-mounter that will automatically
6660 - WM8904 audio CODEC driver.
6661 - PCM .WAV file decoder. Fast forward implemented with sub-sampling
6662 (currently no rewind support).
6663 - Add a NULL audio device that can be used to simply unit-level testing
6665 - Audio subsystem now supports interfaces for fast-forward and rewind
6666 needed by CMediaPlayer; add hooks for equalizer settings needed by
6671 - MTD: Extend erase block size to 18-bits in order (decrease block
6672 size to 14-bits) to handle parts with large erase blocks. From Kosma
6674 - maxTouch: Add support for the Atmel maXTouch touchscreen controller.
6678 - Provides the timers needed to support the Tickless mode of operation.
6682 - Add SAM4CM IPC register header file. From Max Neklyudov
6683 - Various fixes PMC and clock configuration for the SAM4CM port from
6688 - SAM4 AES driver. Contributed by Max Neklyudov
6692 - Add logic to redirect all SAMA5D4 interrupts to the AIC
6693 - Add a configuration option to reserve DRAM for a framebuffer when
6697 - Add SAMA5 slow (32.768KHz) clock support.
6698 - Add support for the ARM L2CC-PL310 L2 cache. The system runs with
6700 I suspect that the memory timing configuration for L2CC needs to
6702 - Provides the timers needed to support the Tickless mode of operation.
6706 - XDMAC-based HSCMI driver for the SAMA5D4
6707 - Adapt the SAMA5D3 LCDC driver to work with the SAMA5D4 which has
6708 no hardware cursor.
6709 - PIO: Add a new interface sam_pio_forceclk() that can be used to
6712 - TWI: Now supports the up_i2creset() method.
6713 - TWI: Use sam_pio_forceclk() so that we can read the current state
6714 of an open-drain output in the TWI reset logic.
6715 - SSC: SCC Frame Synch Delay and Start Delay are now configurable.
6716 - PCK: Add the slow clock and the main clocks as options for the
6718 - Timer/Counter: Can now handle non-constant BOARD_MCK_FREQUENCY. Also
6720 - One shot and free-running timers. These are wrappers around the low
6721 level timer/counter logic to provide one-shot and free-running
6723 can be used for any purpose.
6727 - Add a boot loader that runs from ISRAM and loads an Intel HEX file
6729 - Add a configuration that will load a bootloader into AT25 Serial
6731 - SAMA5D4-EK NSH configuration supports many more features: RTC, HSCMI
6735 - SAMA5D4-EK: Add an NxWM configuration using the TM7000 LCD with
6736 the maXTouch multi-touch touchscreen.
6737 - SAMA5D4-EK NxWM: Uses new, larger icons in configuration instead of
6739 - SAMA5D4-EK NxWM: The NxPlayer and audio system are now enabled in
6743 - SAMA5D3x-EK: Add a configuration to support the command line
6748 - Add support for the STM32F103RC and RD. From Kosma Moczek
6749 - Add a procfs entry to show the state of the CCM heap usage.
6754 - Unconfigure GPIO pins when closing a serial port to prevent back
6755 effects from back-powering on the TX pin. From Kosma Moczek
6759 - ADC: Added burstmode ADC conversion mode, with CONFIG_ADC_BURSTMODE
6761 - Ethernet: Added option to use the kernel worker thread to do most of
6763 - Ethernet: Critical bugfix: From time to time (after some hours) the
6765 never recover because there is no receive watchdog as the transmit
6770 - mbed: Port ADC, DAC, and PWM logic from the configs/zkit-arm-1769.
6772 - mbed: Eliminated a problem with PHY DP83848C : it doesn't need a
6777 - Adds support for localtime. From Max Neklyudov
6781 - Make variable definitions 'static const' when possible to save RAM
6786 - system/mdio: New PHY tool from Daniel Lazlo Sizter.
6787 - NSH: Networking logic modified to handler the case of SLIP
6789 - NSH: Add a configuration to use a USB keyboard for the stdin
6791 - NSH: Software assigned MAC address is now configurable. From Lazlo.
6792 - NSH: Also add an option to let platform-specific logic select the
6794 - NSH: There is now a configuration option that will bring up the
6795 network on an separate thread. Since the network bring-up is
6796 asynchronous, there are no serial console start-up delays due
6798 - NxPlayer: Changes to integrate with Ken's NxWM::CMediaPlayer.
6799 - NxPlayer: Add interfaces for fast-forward and rewind needed by
6800 CMediaPlayer; add interface for equalizer settings needed by the
6802 - NxPlayer: Supports new way of identifying the end of the audio
6804 - Sudoku: Add a sudoku game.
6806 …st critical bugfixes are listed here (see the ChangeLog for the complete list of bugfixes and for …
6810 - NxConsole: Fix scrolling for the case of the framebuffer device. In
6811 this case, the logic for clearing the vacated region at the bottom
6817 - Important fix to the read-ahead buffer queue management: Consumed
6820 - Fix an error in SLIP escaping. From Max Neklyudov
6824 - Fix an include file ordering problem when CONFIG_NET_STATISTICS=y.
6825 - Move statistics from uip.h to new netstats.h to remove a circular
6827 - Various fixes for networking and tiny webserver from Max
6828 - webclient: Fix to offset calculation from Rony Xln. Prevents 0x0a
6830 - webserver: Fix some configuration usage issues. From Max.
6831 - webserver: Missing logic to close sockets on loop termination.
6835 - SmartFS: Fix for a bug that would show up if CONFIG_MTD_BYTE_WRITE
6842 - Change how the end of the audio stream is detected by the leaf audio
6843 component. This used to be done by looking for the first partial
6844 buffer. That does not work with the in-place sub-sampling performed
6852 - RAMLOG putc() method needs to set the errno and return EOF on a
6854 - Add missing configuration option to select the MAX11802 touchscreen
6859 - Fix logic in conversion of physical and virtual DRAM addresses when
6860 running out of DRAM. This is an important bug fix for the SAMA5D3
6862 - Critical SAMA5D3 and 4 bug fix: PIO clocking must be enabled for
6867 - OHCI: Fix an error in a DEBUGASSERT statement. Caused an
6868 assertion to fire inappropriately when a low- or full-speed device
6870 - OHCI: Pointers to allocated port values were not being
6873 - SSC: Needs to account for data offset in audio buffer
6875 * ARMv7-M:
6877 - Correct the initial value of the BASEPRI register. This was
6882 - I2C: Fix missing configuration of GPIO pins in I2C driver. Fix
6884 - STM32 OTGFS device: Various changes to try to reduce that amount of
6890 - Ethernet: Wrong bits being cleared before OR-ing in new settings.
6891 - Ethernet: Fix an error in the function that determines the number
6894 - I2C: Test for read or write operation was reversed. How could
6899 - SAM4S Xplained-Pro: Correct description of LEDs and usage. From
6904 - PIO: Fix definitions that could disable PIO interrupt support if only
6906 - PIO: Macro SAM_PION_VBASE is not define-able for the SAMA5D4 and must
6908 - PIO: Fix a typo in Schmitt trigger configuration; Configure pin as a
6909 vanilla input first so that final pin configuration is more read-able
6911 - PIO: Logic for Schmitt trigger selection backward
6912 - SAMA5D4: Correct system timer frequency. Input clock is MCK/2, not MCK.
6916 - Ethernet: Wrong bits being cleared before OR-ing in new settings.
6917 - Ethernet: Fix an error in the function that determines the number
6920 - HSMCI: The 8-byte SCR transfer was failing silently with the DMA
6922 a non-DMA read transfer mode.
6923 - HSMCI: Fix a problem on card insertion/removal callback handling.
6926 some not-so-good behaviors. The solution is to perform all
6931 - PIO: Fix some cloned errors in SAM GPIO interrupt setup
6935 - Ethernet: Comment out an assertion that is reported to fire
6940 - stdint.h: Correct naming of [U]INT_LEASTn_{MAX|MIN} and
6942 - unistd.h: POSIX definitions should be defined to a value. rom Kosma
6944 - Fixes associated with rint() and related interfaces in the math
6949 - NAME_MAX not available on SunOS; use FILENAME_MAX or MAXNAMELEN.
6954 - NSH: if # appears on line, need to comment ignore additional
6956 - NxPlayer: Check for file read errors and end-of-file with zero
6958 - NxPlayer: NxPlayer needs to set curbyte field to zero before
6962 NuttX-7.5
6963 ---------
6966 and is available for download from the SourceForge website. Note
6967 that release consists of two tarballs: nuttx-7.5.tar.gz and
6968 apps-7.5.tar.gz. Both may be needed (see the top-level nuttx/README.txt
6969 file for build information).
6975 - Watchdog Timer Allocation: (1) If we run out of pre-allocated
6977 from the heap. A reserve of pre-allocated watchdog timers is
6978 maintained so that there will always be timers available for
6979 interrupt handlers. (2) Added support for statically allocated
6981 - Address Environment Support: (2) New OS APIs integrated into all
6982 platform-specific context switching logic (up_block_task(),
6984 - Kernel Build Support: (1) The MPU based "kernel build" renamed to a
6985 protected build (CONFIG_BUILD_PROTECTED); added support for the a
6986 new MMU-based "kernel build" (CONFIG_BUILD_KERNEL), (2) The system
6989 - System Startup: Add configuration options to start the system from
6991 - Startup Parameter Passing. There used to be two ways to pass
6998 - Board Initialization: Add capability to perform initial board
7001 the start-up/IDLE thread. That is because blocking or waiting is
7006 - Granule Allocator: (1) Add a new function to reserve un-allocatable
7008 un-initializing a granule allocator.
7009 - Page Allocator: Add a simple physical page allocator based on the
7011 allocator is sufficiently deterministic for long range use, but it
7012 gets get a page allocator in place for testing very quickly.
7013 - Remove CONFIG_MM_MULTIHEAP. Non-multiheap operation is no longer
7015 - sbrk(): sbrk() is now supported in the kernel build to permit
7016 dynamically sized, per-process heaps.
7017 - Per-Process Heaps: Space at the beginning of the process data space
7018 is now reserved for user heap management structures. In the kernel
7020 use code in order to allocate user-specific data.
7021 - User Heap Management: When a privileged thread exits, we have to
7025 - Inter-Process Shared Memory Support: (1) Add implementation and
7026 documentation for shmget(), shmctl(), shmat(), and shmdt(). (2)
7028 memory interfaces. (3) Add platform-specific interface definitions
7030 - Virtual Page Allocator: Add support for a per-process virtual page
7039 - SMART FS and SMART FS procfs updates from Ken Pettit.
7040 - The MTD Read-ahead/Write buffer layer appears is now functional.
7044 - Add logic to initialize the per-process user heap when each user
7049 - Change all occurrences of NxConsole to NxTerm.
7053 - PHY Interrupts: (1) Standardize a PHY interrupt attachment
7054 interface. (2) Add support for an ioctl that can be used to notify
7057 - Improved Send Logic: In the past, the first packet send to a new
7058 network peer would fail; there would be no entry in the ARP table
7059 for the peer and so an ARP request could replace that first packet.
7062 send ARP requests periodically to get the mapping and (3) wait for
7070 - Emulated SPI FLASH driver for the sim target from Ken Pettit.
7074 - The default host is now x86_64 and the -m32 option will be
7075 automatically selected for simulation builds.
7079 - Removed all support for the 8051 family architecture from the NuttX
7090 - configs/16z: Support for this board has been removed from the NuttX
7092 directory). This port is not ready for usage but may return to the
7097 - SAM4E-EK: Add (1) a fully-functional ILI9341-based LCD driver and
7098 (2) a fully-functional NxWM configuration.
7100 * ARMv7-A:
7102 - Address Environments: Add support for application address
7103 environments using the Cortex-A MMU. Implement standardized
7104 platform-specific interfaces of NuttX address environment
7106 - Cache Operations: Implement standardized, platform-specific cache
7108 D-cache and invalidate I-cache after an ELF module has been loaded
7110 SAMA5/Cortex-A platform.
7111 - Kernel Build: (1) Add implementations of system call gate. (2) Add
7112 CRT0 start-up file that can be linked with separately built user
7113 programs. (3) Add support for delivery of use-mode signals in the
7114 kernel build. (4) Add logic to initialize the per-process user heap
7115 when each user process is started. (5) ARMv7-A exception handling
7119 - Shared Memory Support: (1) Add logic necessary to handle remapping
7122 implementation of platform-specific shared memory support.
7126 - Implement all network ioctls, including the new ioctl to setup PHY
7128 - In kernel build with address environment, need logic to map user
7133 - SAMA5D3 Xplained, SAMA5D3-EK, and SAMA5D4-EK: Convert existing
7136 - SAMA5D4-EK: Add a configuration for testing the kernel build
7138 card or from and in-memory ROMFS file system.
7139 - SAMA5D4-EK: Add documentation/support for Rev E. board.
7143 - Ethernet: Modified to support the change to the network ioctl
7144 signature changes. Also add support for new ioctl to setup PHY
7149 - STM32F4Discovery with STM32F4DIS-BB: Add a network enabled NSH
7150 configuration for the STM32F4Discovery board with the STM32F4DIS-BB
7151 base board installed. Includes support for the microSD card slot on
7152 the STM32F4DIS-BB base board.
7156 - Add support for the TI CC3200. From Jim Ewing.
7160 - Add support for the TI CC3200 Launchpad. From Jim Ewing.
7164 - Re-implemented poll() delay using sem_timedwait().
7168 - Export Target: In the kernel or protected builds, (1) only the user
7172 head object for the kernel and protected builds.
7173 - Add logic that will permit us to build user libraries with different
7175 -fno-common option when building ELF code to prevent SHN_COMMON
7180 - NSH: Extend the NSH network initialization logic. There is now an
7186 - ELF Example: The ELF test/example has been extended so the
7189 minimize the need for symbol tables.
7190 - Change all occurrences of NxConsole to NxTerm.
7191 - MTDRWB Example: Add an example to test MTD R/W buffering.
7192 - OS Test Example: Add a trivial test of sem_timedwait.
7196 - Import Target: (1) Add logic that will allow building applications
7198 Add .config file to export package. (3) Create apps/import. Create
7200 requires -fno-common in CFLAGS. Copy some base logic from
7201 nuttx/tools/Config.mk to apps/import/Make.defs. (4) Add
7202 apps/import/scripts/gnu-elf.ld GCC linker script for ELF import
7204 - All Makefiles: (1) Add an install target to all makefiles. For
7205 the import build, the top-level Makefile now does two passes: (1)
7207 Add program installation for CONFIG_BUILD_KERNEL in all Makefiles
7208 that build a main(). (3) For kernel build, the object file
7211 - All Built-In Programs: With kernel build (CONFIG_BUILD_KERNEL),
7213 - NSH: Several commands must be disabled in the kernel build because
7216 - apps/tools/: (1) Add mkimport.sh to expload an NuttX import package
7219 - ELF and NxFLAT Examples: Do not build test cases that use
7224 - refresh.sh: Add a tool to make refreshing configurations easier
7226 - mksyscall.c: Build syscalls that do not need header files.
7227 - mkexport.sh: Add .config file to export package.
7228 - See above for new apps/tools scripts.
7235 realization of Unix-style user processes in NuttX. There is more to
7239 * XMega: There are some fragments in place for an XMega port. That
7242 * Galileo: Similarly, there are fragments in place for an Intel Galileo
7245 …st critical bugfixes are listed here (see the ChangeLog for the complete list of bugfixes and for …
7249 - Kernel build fixes: (1) IDLE TCB setup needs to indicate that the
7254 - Several pthread interfaces: Add const storage class to phthread
7256 - sched/clock: Remove vestiges of g_tickbias; need, instead, to apply
7258 - System Calls: (1) Several typos fixed; corrected integration of
7265 - procfs: Fix some procfs breakage introduced by reorganizing some
7266 non-reorganizable data structures. From Ken Pettit.
7267 - AT45: In at45db_bwrite , the buffer is not increased when writing
7272 - ELF relocations. Some relocation types do not have a named symbol
7273 associated with them. The design did not account for that case.
7274 - ELF Loader: Critical bugfix.. BSS was not being cleared.
7278 - Granule allocator initialization uses wrong allocator to setting
7280 - Add a flag to group structure: If the group is created by a kernel
7285 - crypto/cryptodev.c: Path segments reversed in include file path. Noted by Brennan Ashton.
7289 - Common CAN upper-half: In can_txdone, waiters on the semaphore
7291 it returns -EIO if there are no new packets, and second the
7297 - System Calls: Fix a typo in system call when fetching parameter from
7302 - STM32 F401 UART: Correct support for USART6 on this chip. From
7304 - STM32 FLASH fixes: use size_t instead of uint16_t, make interface
7306 - Fix for UART7 and UART8 on STM32 clock enable from Aton.
7307 - CAN: At the end of the interrupt handler, the interrupts were being
7312 calls can_xmit which disables interrupts if there are no new packets
7314 - Additional STM32 CAN correction suggested by Max Holtzberg.
7318 - configs/mikroe-stm32f4: Fix a few compile bugs and minor corrections
7319 to the mikroe-stm32f4 configuration source. From Ken Pettit.
7321 * ARM9/ARMv7-A:
7323 - System Calls: Fix ARM7/9 and Cortex-A SYSCALLs: For threads in SVC
7326 - Task Setup: All tasks, even user mode tasks, must start in
7327 supervisor mode until they get past the start-up trampoline.
7328 - ARMv7-A: Modify up_fullcontextrestore() for CONFIG_BUILD_KERNEL.
7339 - SAM3X/Arduino Due: Fix typo in sam3x_periphclks.h; add SCLK
7341 - SAM3 RTT: Only SAM4 family has RTTDIS bit in the MR register.
7346 - sscanf(): NuttX libc tried to guess how many characters to parse,
7352 - Corrected atan2 implementations from Denis Arnst.
7353 - Change to lib_dtoa() to fix precision error from trailing zeroes.
7358 - Fix NSH PS command: If there are no arguments, it could print
7359 garbage for argument list.
7363 - Null Example: Need to include config.h it order know if this is or
7367 NuttX-7.6
7368 ---------
7371 and is available for download from the SourceForge website. Note
7372 that release consists of two tarballs: nuttx-7.6.tar.gz and
7373 apps-7.6.tar.gz. Both may be needed (see the top-level nuttx/README.txt
7374 file for build information).
7380 - Moved name semaphore and message queue support out of the OS and
7386 - Add SIGPOLL for use as part of the AIO implementation.
7387 - Remove CONFIG_MAX_TASK_ARGS configuration. There is now no
7389 to a new task on start-up.
7393 - Add support for priority inheritance on the low priority worker
7399 only implemented for AIO.
7400 - Add support for multiple low-priority work queue threads. This
7401 allows individual worker threads to block indefinitely for I/O as
7406 - Implement create() (as a macro).
7407 - Add pread() and pwrite(). Also added pread() and pwrite()
7409 - AIO: Add aio_read(), aio_write(), aio_return(), aio_error(),
7416 - Implement standard syslogmask() to control logging (also removing
7417 the non-standard syslog_enable()).
7421 - Extend MTD support to the M25P16. From Sébastien Lorquet.
7425 - BCH (Block-to-Character): Add support for seeking in BCH. From
7428 * Graphics Support/Graphics-Related Drivers:
7430 - Add support for a generic ILI9341 LCD driver. From Marco Krahl.
7431 - Add ANSI/VT100 foreground and background color commands.
7432 … - Add driver for ST7565 LCD that works with NHD-C12864KGZ display. From Pierre-noel Bouteville.
7436 - Verify that multiple networks can be supported.
7437 - Add support for the case where there are multiple networks: One
7443 - Extensions to UDP and TCP connection structures for the case of
7445 be unique with respect to the IP address. So, for example, you
7450 - Removed the old, strange up_stdio.c and implemented a simulated UART
7455 - Add support for 64-bit longjmp/setjmp in simulator platform. This
7456 will permit operation of the simulation natively on a 64-bit
7459 * ARMv7-M:
7461 - Add ARMv7-M CMSIS ITM header file and library. From Pierre-noel
7463 - Add ARMv7-M CMSIS DWT and TPI header files. From Pierre-noel
7465 - Add ARMv7-M support to use ITM for SYSLOG debug output. Includes
7466 logic from Pierre-noel Bouteville.
7470 - Add support for SAM3/4 basic serial TERMIOS and flow control.
7476 - SAM4E-EK: Add support for PHY interrupt.
7480 - SAMA5D3-Xplained: Add a configuration that provides a simple test
7481 for the EMAC and GMAC on the SAMA5D3 working together.
7482 - SAMA5D4-EK: Add a configuration that provides a simple test for the
7487 - Add an I2C header file for the Freescale KL family. From Alan
7492 - Add support for tickless operation using the NXP LPC43xx. From
7497 - Add a basic port for the SiLabs EFM32 family. Includes many files
7498 contributed by Pierre-noel Bouteville .
7502 - Add board support for the EFM32 Gecko Starter Kit.
7503 - Add board support for the Olimex EFM32G8809128 STK. NOTE: I am
7504 unable to test this configuration due to tool-related issues.
7505 - Add board support for the SiLbas EFM32GG Giant Gecko Starter kit.
7509 - Add support for the STM32 F411RE from Serg Podtynnyi.
7510 - Add support for the STM32F103RG. From Murilo Ponte.
7514 - STM32 F4: Add logic that implement true high speed support for the
7515 STM32 OTGHS peripheral and concurrent support for both LS and HS
7516 OTG. New OTGHS drivers provided for both device and host. From
7521 - STM32 Nucleo-F411RE: Extend this board configuration to also support
7522 the Nucleo-F411RE. From Serg Podtynnyi.
7523 - Add support for the STM32F429i Discovery's LCD (SPI based). From
7525 - configs/stm32f100rc_generic: Removed this generic board configuration.
7527 board configurations do not provide support for any specific hardware
7528 but can be useful only if there are not other examples for the setup
7529 for a particular architecture. Not the case here.
7533 - Add a mostly bogus wchar.h header file. This file is mostly bogus
7537 - Add isatty() function. From Alan Carvalho de Assis.
7538 - Add mktemp(), mkstemp(), tmpnam() and tempnam().
7542 - Add a PRELINK macro to Config.mk. From Kriegleder.
7543 - compiler.h: Defines inline functions as not instrumented - this is
7544 relevant for anyone using instrumentation. From Lorenz Meier.
7548 - apps/interpreter/bas: Added in the Michael Haardt's BAS 2.4 adapted
7549 for use by NuttX by Alan Carvalho de Assis. Includes support for
7551 - Examples: Added bastest/ which holds a special version of Michael
7552 Haardt's BAS 2.4 test files adapted for use by NuttX on a ROMFS file
7554 - Examples: Add a simple UDP relay bridge for testing configurations
7555 with multiple networks. Includes a host-side test driver for
7557 - Netutils: Add implementation of timeouts for the netutils webclient.
7559 - NSH: Add support for a custom NSH ROMFS startup image header file
7561 - OS test: Add a simple test of named semaphores.
7562 - OS test: Add AIO test case in OS test.
7569 realization of Unix-style user processes in NuttX. There is more to
7573 * XMega: There are some fragments in place for an XMega port. That
7576 * Galileo: Similarly, there are fragments in place for an Intel Galileo
7580 ChangeLog for the complete list of bugfixes and for additional, more
7585 were be disabled but never re-enabled, and errors in the Tickless mode of
7590 - vfork(): Now that arguments are kept on the stack, the way that
7594 - vfork() problem: If we get to vfork() via system call, then we
7597 - Fixes to tickless operation code, especially in alarm mode. From
7599 - Fix an important bug in the watchdog timer creation logic.
7600 - Calling mq_timedreceived() with immediate timeout was getting stuck
7602 timeout value to past time, for example abstime={ .tv_sec=0,
7611 - Fix a place in the memory manager where it explicitly assumed that
7615 - Granule Allocator: If the INTR granule allocator mode is enabled,
7616 there is no semaphore to destroy. From Lorenz Meier.
7620 - Network routing: I don't think that the net_route() function has
7623 - Move and rename IP header flag definitions. The problem fixed here
7626 - Network routing: Refuse to perform routing table lookups for the
7628 - Network routing: Add logic to netdev_findbyaddr() to return the
7629 correct network device for the case where a broadcast
7631 files because additional parameters are required for
7636 - NXFFS Dump: Fix problems with redefinitions of fdbg macro. With the
7641 - poll() was not waking up from signals (for example mq_notify()
7643 - poll(): Add proper handling for sem_timedwait errnos. From Jussi
7645 - include/nuttx/fs/fs.h: Fix typo in conditional compilation. From
7648 * Graphics/Graphic-Related Drivers:
7650 - Remove warnings when CONFIG_NXTK_BORDERWIDTH is set to zero. From
7651 Pierre-Noel Bouteville.
7655 - Make standard syslog and vsyslog POSIX compliant (also modify
7656 non-standard syslog functions for compatibility).
7657 - R/W buffering: Fix typo that can cause compilation error.
7661 - SAM4S: Add missing SPI0 clock configuration macro for the SAM4S. From spasbyspas.
7665 - SAM4E-EK: Fix an error in a USART1 pin number.
7669 - SAMA5DF4: Fix several typos that will prevented EMAC1 from
7674 - Fixes to allow compile of lpc43_gpioint.c. From Brandon Warhurst.
7678 - Add missing ADC pinmap definitions for the STM32 F103R from Martin
7683 - STM32 EXTI: Correct STM32 RTC EXTI bit definition. From Lazlo.
7684 - STM32 IWDG, WWDG, DBGMCU: Fix watchdog stop bit usage. From Lazlo.
7685 - STM32 OTGFS: Correct a typo in the STM32 OTGFS register bit definitions.
7689 - ARM up_internal.h: Add protection from C++ name mangling in the
7694 - PIC32MX7: DEVCFG0 bit 2 must be set. Writing bit 2 as zero can
7699 - The implementation of access() as vararg macro has the issue that
7703 negative side effects for users of the function. From Lorenz Meier.
7704 - The definition of strncpy() is that empty space should be zero-
7708 - limits.h: Remove the definition of INT_FAST32_MIN which is already
7713 - apps/: Correct everything under apps to use the corrected syslog
7714 interfaces. Remove any non-portable uses of syslog.
7715 - NSH: Fix ls -l output for regular files.
7716 - NSH: Fix reversed in/out file closing in DD command when an error
7718 - NSH: Add logic to restart the console wait if an error occurs
7724 - Netutils: Fix memcpy of host address in netlib_gethostaddr(). From
7726 - Netutils: If you make a DNS request before the DNS address it would
7730 - Netutils: Fix md5 hashing when digest[$i] islower that 16. From
7732 - Stack Monitor: Fix compile problems introduced when the syslog()
7733 prototype changed; Also update Makefile for kernel build From
7735 - Examples: Update NxTerm makefile for kernel-build issues. From
7737 - Examples: Fixes to keypadtest from Pierre-Noel Bouteville.
7738 - Examples: These examples all set the IP address of eth1 but the
7742 NuttX-7.7
7743 ---------
7746 and is available for download from the SourceForge website. Note
7747 that release consists of two tarballs: nuttx-7.7.tar.gz and
7748 apps-7.7.tar.gz. Both may be needed (see the top-level nuttx/README.txt
7749 file for build information).
7755 - Task exit handling: Add logic to clean up after task_delete() or
7758 - Stack coloration: Removed CONFIG_DEBUG_STACK and replaced it with
7764 - Discrete joystick driver: Added an interface definition and upper
7765 half driver for a discrete joystick device (where X/Y changes are
7767 - Analog joystick driver: Added an interface definition and upper
7768 half driver for a analog joystick device (where X/Y positions are
7770 - Add driver support for the ADXL345 accelerometer. From Alan
7772 - Generic serial driver: Add watermark levels to the serial RX flow
7779 - Add procfs write support. From Ken Petit.
7780 - Implemented wear-leveling in the SmartFS. From Ken Pettit.
7781 - MMC/SD Interface: MMCSD SDIO: Add support for a new
7782 SDWAIT_WRCOMPLETE condition. The previous logic used a busy-wait
7784 ready for the next transfer. That busy-wait can be quite long --
7786 pin which will change state when the card is no longer busy. This
7787 change avoids the busy-wait poll by reconfiguring the SD D0 pin as a
7788 GPIO interrupt, then waiting for the card to become ready without
7793 - Add support for a generic EEPROM driver that accesses EEPROM as a
7798 - Many new fonts converted for use with NuttX and added by
7799 Pierre-noel Bouteville
7803 - IPv4 support is now conditioned on CONFIG_NET_IPv4.
7804 - Implemented and verified IPv6 support conditioned on
7805 CONFIG_NET_IPv6. Either IPv4 or IPv4 or both may be selected.
7807 for IPv6 ioctls to manipulate IP addresses.
7808 - Integrated support for ICMPv6 and the ICMPv6 Neighbor Discovery
7810 - All Ethernet drivers: Modified to support. Most, however, are
7811 still missing address filtering logic required for ICMPv6 Neighbor
7814 - Also added missing raw/packet socket support to all Ethernet drivers.
7818 - Add a configuration build and test the Traveler first person game
7820 - Add an X11 mouse-based simulation of an analog joystick device
7824 - Add analog Joystick shield support for the SAMA5D3 Xplained board.
7828 - Add GPIO interrupt capability for the KL architecture. From Alan
7833 - Freedom-KL25Z: Add board support for the ADXL345 accelerometer. From
7835 - Freedom-KL25Z: Update the Freedom KL25Z board CC3000 support to use
7840 - A port of NuttX to the LPC4357-EVB from Toby Duckworth. This port
7841 is a leverage of the LPC3330-Xplorer port and still have a some
7842 misinformation from that port that needs to be updated for the
7843 LPC4357-EVB.
7847 - Serial: Add support for serial termios TCGET and TCSET. For the
7848 moment, only set/get speed is implemented. From Pierre-noel
7850 - RMU: Add support for the EFM32 reset management unit (RMU). From
7851 Pierre-noel Bouteville.
7855 - Add support for timer/PWM on the EFM32GG. From Pierre-noel
7860 - Enable support for the STM32 F102. From the PX4 team.
7864 - STM32 F429 LTDC: Add interface to perform hardware accelerated layer
7867 - STM32 F429 LTDC support: Implemented LTDC framebuffer support for the
7871 - STM32: Add support for the internal low speed clock (LSI) as a
7873 32kKhz oscillator installed, for those boards we must fallback to
7875 - STM32 SDIO: Add support for the new SDWAIT_WRCOMPLETE condition.
7880 - Add a discrete Joystick support for the STM3210E-EVAL.
7881 - Add analog Joystick shield support for the Nucleo F4x1RE boards.
7882 - STM32 F429i-Disco: Add support for initializing of the ltdc
7883 controller and the lcd device connected on the stm32f429i-disco.
7885 - Removed the px4-v2_upstream configuration. This was not the
7886 official configuration for the PX4 board and has led to confusion
7894 - Add support for the TI Tiva TM4C 129X family. Some unverified
7895 support for the TM4C 1294 is also in place.
7899 - Added support for Tiva I2C driver. Verified on the Tiva TM4C123G
7901 - Added a Tiva TM4C129X Ethernet driver.
7902 - Add a timer library for generic support of Tiva timers
7903 - Add a driver lower half for drivers/timer.c. Only 32-bit periodic
7908 - TM4C123G Launchpad: Add initialization logic for an external AT24
7911 - Board support for the Tiva DK-TM4C129x Connected Development Kit.
7912 - DK-TMC129X: Add an IPv6-enabled NSH configuration.
7916 - Added support for a variadic ioctl() function. The ioctl()
7917 interface is a non-standard, Unix interface. NuttX has always used
7918 the older, three-parameter version. Most contemporary systems now,
7920 option to insert a shim layer to adapt the three-parameter ioctl()
7922 is the same three-parameter logic. The only real complexity to the
7924 - Added sys/custom_file.h. Used when CUSTOM_FILE_IO is define and
7925 avoids re-definition errors about the FILE define. From Thomas
7927 - Add CRC8 support to the C library. From Ken Pettit.
7928 - math.h: Added support for the expm1 functions. From Brennan Ashton
7932 - apps/examples/djoystick: Add a test of the discrete joystick
7934 - apps/examples/ajoystick: Add a test of the analog joystick
7936 - apps/examples/ltdc: Add ltdc test example. From Marco Krahl
7937 - apps/system/lm75: Add a tiny application to read the temperature
7938 from an LM-75 (or compatible) temperature sensor
7939 - apps/examples/timer: Add a trivial test of the timer driver
7941 - apps/system/cu: Add a minimalist implementation of the 'cu'
7942 terminal program (part of Taylor UUCP for ages). Using it, you can
7945 in handy for people that have e.g. GSM modems, GPS receivers or
7948 - apps/interpreters/micropython: A port of Micro Python to NuttX.
7951 - apps/netutils/dnsclient: Can select to be either IPv4 or IPv6, but
7953 - apps/netutils/netlib: Add new library functions to manipulate IPv6
7955 - apps/examples/nettest: Update test so that it can be used to test
7957 - apps/examples/udp: The UDP test example has been extend to support
7960 - apps/nshlib: Add logic to initialize IPv6 addresses
7961 - apps/nshlib: Add the ping6 command to support checking IPv6 networks.
7962 - apps/nshlib: Clean up network status presentation for IPv6
7968 * IPv6. While basic IPv6 support was completed in NuttX-7.7,
7973 realization of Unix-style user processes in NuttX. There is more to
7977 * XMega: There are some fragments in place for an XMega port. That
7980 * Galileo: Similarly, there are fragments in place for an Intel Galileo
7984 ChangeLog for the complete list of bugfixes and for additional, more
7989 - POSIX message queues: msg type should be char * not void * in
7991 Pierre-Noel Bouteville
7992 - POSIX message queues: In message queue creation return ENOSPC error
7993 if size exceeds the configured size of pre-allocated messages; Use
7994 ENOSPC vs ENOMEM per OpenGroup.org. From Pierre-Noel Bouteville.
7995 - Task Names: strncpy() will not copy the terminating \0 into the
8004 - Granule allocator: Fixes some issues found by the PX4 team using
8009 - Several fixes correcting issues with the CC3000 networking. From
8011 - CC3000 Fix: Data can be unaligned. When dereferenced as an input
8014 - Correct naming of fields in struct sockaddr_in6: sin6_port and
8016 - accept(): Correct the value returned by accept() in the case where
8017 net_lockingwait() is called. It was returning -1 and losing the
8022 - Loop device should return -EINTR is interrupted by a signal.
8023 - M25P serial flash driver: Add subsector size of the M24P16 part.
8025 - Common serial driver: In case a thread is doing a blocking operation
8031 arrive in the reader thread. The problem was fixed by re-
8034 - Pipes: Fixes some issues found by the PX4 team using Coverity. From
8036 - CDC/ACM driver: Fixes some issues found by the PX4 team using
8041 - LPC4357: Changes required to get USART 2 & 3 working on the
8042 lpc4357-evb. From Toby Duckworth.
8046 - Several fixes correcting issues with the STM32 header files from
8051 - Ported Tridge's STM32 I2C noise resilience logic from the PX4
8053 - STM32 F2 and F4: Set the GPIO_SPEED_50MHz on all F2 and F4 SPI pin
8057 - Fix for STM32 OTGHS device driver working in FS mode. From Ken
8059 - For STM32 OTG HS DEV (in FS mode): Disable ULPI clock enable in RCC
8064 - STM32 F429 LTDC: Add missing clut register definition. From Marco
8066 - STM32 serial: fix declaration and definition of up_receive() and
8072 - Fix Tiva IRQ control logic; was limited to only 64 IRQs. That is a
8073 problem for higher numbered IRQs on many platforms
8077 - avsprintf(): Fix a bug in usage of va_list on x86. On x86,
8083 - stdint.h: Don't use hex values to specify minimum values of fixed
8085 usable for this purpose in all contexts.
8086 - strncpy(): Would trash a lot of memory if n == 0. From Yasuhiro
8088 - sscanf(). Accept %X and %F as well as %x %f as a format specifiers.
8093 - apps/examples/romfs: fix romfs example builtin app registry issue.
8095 - apps/system/cdcacm, composite and usbmsc: Fix some strangely placed
8097 - apps/netutils/telnetd: Add protection when CONFIG_SCHED_HAVE_PARENT
8099 not retained (no zombies) and block receipt of SIGCHLD so that
8102 - apps/nshlib/: NSH TFTP get command: Wrong file name used for the
8105 NuttX-7.8
8106 ---------
8109 and is available for download from the SourceForge website. Note
8110 that release consists of two tarballs: nuttx-7.8.tar.gz and
8111 apps-7.8.tar.gz. Both may be needed (see the top-level nuttx/README.txt
8112 file for build information).
8114 This release is primarily a bugfix release for the NuttX-7.7 version that
8116 modifications in the NuttX networking to accommodate support for IPv6. This
8117 release follows close behind NuttX-7.7 in order to correct some the problems
8125 - Tickless Mode: added limit of maximum delay that can be request
8132 - VFS Unlink: Add an unlink method to both the character and block
8134 unlinked and there are no open references to the driver, then the
8138 - Pipes and FIFOs: Implement the unlink method. If the pipe/FIFO is
8142 - Added an option to use the syslog'ing device as the system console.
8143 This option enables a low-level, write-only console device at
8144 /dev/console (similar to the low-level UART console device). From
8145 Pierre-noel Bouteville.
8149 - RAM/ROM disk: Add logic to dispose of the driver and RAM buffer
8152 specify what should be done with the RAM/ROM buffer in this case --
8158 - Add support for local, Unix domain sockets. Support included for
8160 - UDP enhancement: Add UDP read-ahead support. In addition to
8161 eliminating the main reason for lost UDP packets, then change
8162 enables support for for poll/select on UDP sockets and also non-
8164 - SLIP interface improvements. From Macs Neklyudov.
8165 - IPv6 Neighbor Solicitation: Added logic to support verification
8171 - IPv6 Autonomous Auto-Configuration: Added support for sending
8173 local IPv6 address, mask, and router address are then auto-configured
8175 - IPv6 Router Support: Add logic to behave like a router (if so
8180 - Optional IPv6 address filtering added to all Ethernet drivers for
8181 the all-routers multicast address.
8185 - Added architecture support for the Atmel AVR ATMega1284P MCU. From
8190 - Added support for the LowPowerLab MoteinoMEGA that is based on the
8195 - Add support for Tickless mode of operation for the SAM4CM platform.
8200 - Ethernet: The SAM4E Ethernet driver can now be configuration to
8204 - SAM4E Ethernet: Add support multicast address matching and IPv6.
8208 - SAM4E-EK: The nsh configuration now configures the Ethernet driver
8209 for execution on the work thread.
8213 - SAMA5D4 Ethernet: The SAMA5D4 Ethernet driver can now be configuration
8217 - SAMA5D3 and SAMA5D4 Ethernet: Add support multicast address matching
8222 - SAMA5D4-EK; Added a configuration to testing IPv6.
8223 - SAMA5D4-EK: Converted the nsh and ipv6 configurations to configure
8229 - Add architectural support for the K26Z128VLH4 chip. From Derek B. Noonburg.
8233 - Add board support for the Freedom KL26Z board. From Derek B. Noonburg.
8237 - Ethernet: Add support multicast address matching and IPv6.
8241 - Add configurable option to unconditionally enable LE clocking. Even
8242 you don't use core clock LE as source for LFA or LFB, to read are
8244 should be enabled. From Pierre-noel Bouteville.
8248 - EFM32 RTC: RTC driver using BURTC. From Pierre-Noel Bouteville.
8252 - AES: Add driver for STM32L162XX AES peripheral. From Juha Niskanen.
8253 - Ethernet: The STM32 Ethernet driver can now be configuration to
8257 - Ethernet: Add support multicast address matching and IPv6.
8261 - Added an IPv6 configuration for the STM32F4-Discovery board (with the
8262 STM32-DISCO_BB base board).
8263 - Converted all STM32F4-Discovery configurations (with base board) to
8269 - Added support for TM4C123G timers. From Calvin Maguranis.
8270 - Added a Tiva ADC driver. From Calvin Maguranis.
8274 - Added TM4C123G timers on the TM4C123G Launchpad. From Calvin Maguranis.
8275 - Added Tiva ADC support to the TM4C123G-Launchpad. From Calvin Maguranis.
8279 - Math Library: Added support for inverse hyperbolic functions,
8285 - apps/examples/ustream: Add a simple test of Unix domain stream
8287 - apps/examples/udgram: Add a simple test of Unix domain datagram
8289 - apps/netutils/netlib: Add utilities to convert to/from prefix
8290 lengths from/to 128-bit network masks.
8291 - apps/nshlib: Modify the NSH IPv6 ifconfig command to show the more
8292 standard post-pended prefix value, rather than the full 128-bit
8300 realization of Unix-style user processes in NuttX. There is more to
8304 * XMega: There are some fragments in place for an XMega port. That
8308 ChangeLog for the complete list of bugfixes and for additional, more
8313 - Work Queues: Fix a backward calculation when determining the time
8316 - clock_systimespec(): Fixes for compilation errors in certain
8321 - Fixed a problem with one of the font files. From Pierre-noel Bouteville.
8325 - IOB Deadlock: There were issues with the TCP write-ahead buffering
8328 wait for TCP read-ahead buffering space to be available. It should
8329 drop the packets immediately if no buffering is available. This was
8331 waited are still present (like iob_alloc()), but now there are non-
8333 TCP read-ahead logic now uses only these non-waiting interfaces.
8334 - TCP Deadlock: Fix another deadlock when CONFIG_NET_NOINTS is enabled.
8338 CONFIG_NET_NOINTS=y, the wait blocks with the network locked -- bad
8340 - ARP response waiting: Fixes another CONFIG_NET_NOINTS issue. When
8343 interrupts are re-enabled while we wait and all is well).
8344 - TCP accept(): Fix a major TCP bug introduced with the NuttX-7.7
8350 okay. So the symptom was connect-fail-connect-fail-...
8351 - Lots of build problems introduced into multiple NIC support with the
8352 IPv6 changes of NuttX-7.7. Many places where conditional logic based
8359 - Pipes and FIFOs: Fix a race condition between FIFO buffer operations
8363 the pipe. When when used for datagram communications, packets left
8364 in the FIFO will be lost. Some like UDP read-ahead is needed: The
8366 a chance to re-open the FIFO. Added an ioctl (PIPEIOC_POLICY) to
8370 - RAMTRON: Table of parts is not terminated properly if
8376 - Removed all occurrences of up_maskack_irq() that disables interrupts
8379 unconditionally re-enables interrupts with the interrupt exits. This
8386 - ARMv7-A and ARMv7-M memcpy(): Optimized ARM assembly language
8389 - ARMv7-A interrupt handler should not automatically re-enable interrupts
8396 - GPIO Interrupts: Disabling any of EXTI 5-9 interrupts was disabling
8397 interrupts for all EXTI 5-9. Same issue with EXTI 10-15. From Jussi
8402 - RTCC: Fix for recent changes that caused compilation failrues with
8404 - SPI: The source clock for SPI 4,5, and 6 should be PCLK2, not PCLK1
8405 (for F411, F427, and F429). Per David Sidrane.
8409 - execl(): Fix bad logic in counting the number of arguments.
8411 Pierre-noel Bouteville.
8415 - Fix for building with parallel make. Build-server sometimes failed
8416 'make -j24' with errors in the builtin line or or sometimes silently
8418 configured NuttX applications. There are two root causes for this:
8419 (1) Recipes for building builtin_list.h and builtin_proto.h are
8421 first for apps/builtin. This change address both issues. From Juha
8424 NuttX-7.9
8425 ---------
8428 and is available for download from the SourceForge website. Note
8429 that release consists of two tarballs: nuttx-7.9.tar.gz and
8430 apps-7.9.tar.gz. Both may be needed (see the top-level nuttx/README.txt
8431 file for build information).
8437 - Assertions: Add support for dumping board-specific information on
8439 - boardctl(): : Add a new non-standard OS interface called boardctl().
8449 - Line Joins: Line drawing graphic functions now take an argument that
8455 - SPI iInterface: Add an SPIDEV_USER so that there can be board-
8457 - I2C Interface: Add a user provided void * argument to the I2C
8458 callback method for the I2C slave interface. Suggested by Nate
8460 - AT24 EEPROM Driver: Add support for (1) the byte-oriented read()
8462 devices that use 8-bit addressing.
8463 - Freescale MPL115A barometer: Add driver for the Freescale MPL115A
8465 - CS2100-CP: Add a driver for the CS2100-CP Fractional-N Multipler
8467 - RTC IOCTls: Added the definitions of a driver based RTC interfaces
8472 - umount2(): Added to support un-mount flags. umount() is now a macro
8474 - File system interface: Pass the umount2() flags to every unbind()
8477 - FAT unbind: Add support for umount2(target, MNT_FORCE) in the FAT
8482 - netdev_register(): Improve the network device registration logic.
8485 individually for each interface link type. From Max Neklyudov.
8486 - Add TUN network device. Used to support the Netutils PPPD
8489 * ARMv7-M
8491 - ARM Cortex-M7: Add basic support for the Cortex-M7 architecture.
8492 - ARMv7 Common Lazy Exception handling. Add common support for lazy
8493 FPU state saving. MCU-specific lazy FPU saving was already in place.
8494 This change just makes the code share-able.
8498 - SAMA5 Serial: Backport support for flowcontrol and termios from
8503 - Atmel SAMV7: Add architecture support for the Atmel SAMV7 family
8504 (Cortex-M7)
8508 - Atmel SAMV71 Xplained Ultra: Add board support for this SAMV7 board.
8509 This initialize release includes support for: SDRAM, TWI/I2C, SPI,
8511 Xplained Pro LCD. Drivers are available for SSC/I2C, the WM8904,
8517 - EFM32 USB Device is now functional with the efforts of From Pierre-
8519 - EFM32 I2C: Add I2C driver. From Pierre-noel Bouteville.
8523 - STM32F372/F373: Adds architecture support for this STM32 parts.
8528 - STM32 RTCC: Break out a new internal interface, stm32_rtc_setdatetime().
8529 This eliminates some un-necessary time conversions. From Freddie Chopin.
8530 - STM32 RTCC: Add an implementation of the RTC lower half interface
8531 for the STM32.
8532 - STM32 RTCC: Extend the RTC interface to support reading subseconds.
8534 - STM32 BBSRAM: Adds the ability to use the STM32F2 and STM32F4 Battery
8540 - Olimexino-STM32: Board support for the Olimexino STM32 board from David
8542 - Viewtool-STM32F107: Add support for an optional, add-on Freescale
8547 - TM4C1294: Add support for the TM4C1294. Contributed by Frank Sautter.
8551 - Tiva ADC: Updated files to allow for ADC and PWM triggering by a
8553 - Tiva Timer: Refactoring by Calvin Maguranis
8557 - TM4C123G-launchpad: Add ADC support. From Calvin Maguranis.
8558 - TM4C123G-launchpad: Add board button interrupt support. From Calvin
8560 - TM4C1294 Launchpad: Add support for the TM4C1294 Launchpad.
8565 - PIC32MZ: Add architectural support for the PIC32MZ (MIPS32 M14k).
8570 - PIC32MZ Starter Kit: Add basic board support for the PIC32MZ.
8575 - gettimeofday(): This function is no longer a core OS interface. It
8577 - settimeofday(): Added. gettimeofday has been deprecated in POSIX
8579 it to libc as well just for symmetry.
8580 - Day-of-Week: Add CONFIG_TIME_EXTENDED to support the last 3 members
8581 of the tm struct and support for filling them in with the day of the
8583 - sighold(), sigrelse(), sigignore(), sigset() and sigpause(): New
8585 - sys/select.h: Extend the fd_set type definition so that it can
8588 - netdb.h: Add a mostly-commented-out version of the standard netdb.h
8590 - include/nuttx/board.h: Remove common board function prototypes from
8595 - OS test: Improved error checking for sem_timedwait() from Juha
8597 - OS test: Add a simple test of sigprocmask, sighold, and sigrelse.
8598 - PPPD test: Add PPPD test case. Split out from the PPPD daemon by
8600 - Netutils: Add a PPP daemon. From Max Neklyudov.
8601 - NSH: NSH initialization now calls boardctl(BOARDIOC_INIT) instead
8602 of nsh_archinitialize(). Remove support for CONFIG_NSH_ARCHMAC.
8604 - NSH: Allow NSH 'date' command with no hardware RTC. This command
8607 - apps/examples/: Several tests changed (touchscreen adc, pwm,
8608 graphics). No longer call directly into the OS, but rather
8610 - Modbus: Includes extensions to support RTU master mode by
8611 Armink(383016632@qq.com): https://github.com/armink/FreeModbus_Slave-Master-RTT-STM32.
8613 - TZ database: All logic to build timezone database needed for
8621 realization of Unix-style user processes in NuttX. There is more to
8625 * XMega: There are some fragments in place for an XMega port. That
8629 ChangeLog for the complete list of bugfixes and for additional, more
8634 - atexit(): Fix compile failure due to reference to undefined variable
8636 - syscalls: Last changes to message queue prototypes did not make it
8639 - waitpid(): Do not use uninitialized boolean in waitpid(). From Juha
8641 - Timing functions: Fix some nanosecond comparisons. Comparisons should
8642 be greater than OR EQUAL TO 1000000000 for maximum value of nanoseconds
8644 - Time initialization: Fix an error in time initialization when there
8645 is no RTC and the time is initialized from a fixed configured value.
8651 - mq_timedsend(): Should not check for valid time if there is space
8653 - select() and sem_timedwait(): Fix places where the errno value was
8656 - clock_systimer64(): Fix a problem in clock_systimer64 that occurs
8657 when (1) the 64-bit system time is enabled, and (2) the value of
8660 time to 64-bit millisecond value in clock_systmer64() causes some
8663 conversion. The fix is to first convert time to a 64-bit microsecond
8665 - clock_systimespec(): When an RTC is used clock_systimespec() must
8667 the time since power up, no the current time. Issue noted by Max
8669 - AIO: correct some backward tests in aio_read() and aio_write():
8676 - procfs: Fix potential NULL pointer dereference of 'node'. From
8678 - FAT: fat_unbind() was accessing 'fs->fs_sem' after freeing the 'fs'
8680 - mkfatfs: Use DMA memory for mkfatfs when needed. This makes mkfatfs
8682 to ensure mkfatfs operates with boards that use DMA for microSD.
8684 - FAT unmount: Fix a bug in the FAT unbind() logic. There were
8690 - FAT mounting: Fix misthink when CONFIG_ENDIAN_BIG=y. From Lwazi Dube.
8694 - CAN upper half driver: Some lines had to be reordered in the can_open
8701 - crypto: Fix issues when AES support was added for the STM32L1.
8706 - Network initialization: Divide net_intiialize() into net_setup() and
8707 net_initialize() to solve a chicken-and-egg problem. net_setup()
8713 - netdev_unregister(): Fix a list handling error. From Max Neklyudov.
8714 - Socket dup: Do not call sockfd_socket() twice. From Juha Niskanen.
8718 - max11802 touchscreen: Fix possible unmatched IRQ restore (not
8721 - MMCSD SPI Multi-block transfers: ACMD23 must be preceded with CMD55
8725 - MMCSD SDIO: Fix some bad logic when file system debug is turned on:
8727 - Common upper-half serial driver: Report correct number of bytes free
8729 - Pipes/Fifos: Fix zero-lenth writes to pipes/FIFOs. From Jussi Kivilinna.
8730 - USB device MSC: Add NULL pointer check. From Juha Niskanen.
8731 - BCH driver: Avoid NULL pointer dereference when bch->refs == 255.
8733 - Various drivers: The inode unlink method should not be support if
8734 operations on the root pseudo-filesystem are disabled.
8736 * ARMv7-M
8738 - ARMv7M MPU: Bad syntax in ARMv7-M MPU logic would cause failure to
8743 - SAM3/4 Serial TERMIOS: A side-effect of changing serial settings
8746 changed when there are no open references to the serial device. In
8750 to receive data. In that case, the side-effect of disabling
8753 - SAM3/4 Serial: The IMR register is read-only. This means that
8754 sam_restoreints() did not actually re-enable UART interrupts
8756 - SAMA5 HSMCI: Fix a bug in SAMA5 HSMCI. The bitfield mask and shift
8757 values were reversed resulting in a trashed value for the number of
8763 - SAMA5 Timer/Counter: Fix typos in timer/counter header file. From
8768 - STM32 PWR and RTC: Changes to support fully write protecting the
8769 backup domain. N.B. stm32_pwr_enablebkp did not account for the delay
8773 - STM32 SPI: Add missing SPI callback functions to the STM32 SPI
8775 - STM32 I2C: Add missing NULL check. From Juha Niskanen.
8776 - STM32 USB device: Fix stale initialization invalidating later NULL
8778 - STM32 UART: Fix RX DMA setup for UART5. From Jussi Kivilinna.
8779 - STM32 UART: Make input hardware flow-control work with RX DMA. From
8781 - STM32 RTC and clock control: The STM32F4Discovery board doesn't
8783 for the RTC doesn't work. In stm32_rtcc.c the up_rtc_initialize()
8790 LSI and the LSE sources: the LSI can be used for RTC and/or the
8791 IWDG, while the LSE only for the RTC (and to output the MCO1 pin).
8792 This change is not verified for any other platforms. From Leo
8797 - Tiva GPIO driver needed small fixes in the configuration routines and
8798 discovered false-positive bugs in interrupt testing: interrupts are
8803 - mips32/Toolchain.mk: Current Pinguino toolchain uses the prefix p32-
8804 instead of mips-.
8808 - sigaddset() and sigdelset(): Need to set errno if a bad signal
8810 - sfrtime(): Missing implementation of %C in sfrtime() C (was being
8812 - pthread.h: Fix PTHREAD_COND_INITIALIZER.
8813 - ungetc.c: Fix NULL pointer dereference in ungetc() if 'stream' was
8814 NULL, 'stream->fs_oflags' was evaluated. From Juha Niskanen.
8815 - Fixes to asinh(), atanh(), and sinh(): The 'basic' expansions all
8816 exhibited bad cancellation errors near zero (<= 1E-10). This can be
8817 easily seen e.g. with x = 1E-30, the results are all zero though they
8818 should be extremely close to x. The cutoff values (1E-5, 1E-9) are
8819 chosen so that the next term in the Taylor series is negligible (for
8822 - localtime(): Inconsistent configuration name: CONFIG_LIBC_TZDIR vs
8827 - Modbus: Fix some compile problems when TCP is enabled.
8829 NuttX-7.10
8830 ----------
8833 and is available for download from the SourceForge website. Note
8834 that release consists of two tarballs: nuttx-7.10.tar.gz and
8835 apps-7.10.tar.gz. Both may be needed (see the top-level nuttx/README.txt
8836 file for build information).
8842 - ARMv-7M, binfmt/, STM32: Add support uClibc++ exceptions. This
8843 involved additional handling for relative relation types, additional
8844 support for unwinding, as well as additional changes. The
8849 - RA8875 LCD driver contributed by Marten Svanfeldt.
8853 - Union File System: Add support for a union file system that can be
8858 - USB Hub Support: Bring in USB hub-related files from
8864 - USB host CDC/ACM class driver: Added initial implementation of a
8865 host-side CDC/ACM driver. Initial version was a great learning
8867 discussed in the top-level TODO file).
8868 - IPv6 Routing: Complete implementation of the IPv6 routing logic.
8873 - Local Sockets: Add poll support for Unix stream sockets. From Jussi
8875 - net/: ARP, ICMP, ICMPv6, PKT, TCP, and UDP now all receive event
8877 also from Device-specific events such as when the network goes down.
8883 essential part of future support for removable network devices.
8885 - TUN: Misc. improvements to the TUN driver, mostly related to poll().
8890 - Simulator: Add logic to test localtime and TZ database. See
8891 apps/system/README.txt for info.
8892 - Simulation: Add a configuration for testing the Union File System.
8896 - Calypso Compal-E86: Updates for execution out of FLASH on the C139
8901 - SAML21 Support: And chip definitions, configuration framework,
8902 memory map and pin configuration files for SAML21 support.
8906 - SAML21-Xplained: Add a board support for the SAML21 Xplained Pro.
8911 - KL25Z64: Added support for the KL25Z64. The KL25Z64 is a lower
8917 - Teensy-LC: Add board support for the Teensy LC board. Support is
8924 - LPC111x: Support for the LPC11xx family (the LPC1115 MCU in
8929 - LPCXpresso LPC1115: Support for the LPCXpression LPC1115
8934 - LPC17xx Ethernet: Add support for the Micrel KSZ8041 PHY to the
8939 - Lincoln60: Add a network enabled configuration for the Lincoln60
8944 - SAM4CM: Add support for optical mode for the SAM4CM UART1. From
8949 - Kinetis K20: Basic support for the Kinetis K20 architecture. Taken
8954 - SAMV71-Xplained w/maXTouch Xplained Pro: A TWIHS fix was the last
8961 - STM32: Added support for STM32F302K8 and STM32F302K6. From Ben Dyer
8963 - STM32F205RG: Add basic support for the STM32F205RG. From SourceForge
8964 Ticket 40 (anonymous, 2015-05-31).
8965 - STM32 F3: Add DBGMCU register definitions for the F3 family. From
8970 - STM32 LCDC: Defined a second interface for the dma2d controller.
8974 - STM32 PVD: Added support for STM32's Programmable Voltage Detector
8979 - STM32F429i-Disco: Add support for the new DMA2D features to the LTDC
8984 - TM4C1294 Launchpad: Added TM4C1294NCPDT EN0_LED2 (10/100-Base-Tx);
8989 - libc: Add an option to disable support for long long formats in
8991 by omitting large libgcc.a libraries to perform the 64-bit
8996 - nuttx/zoneinfo: Add logic to build a ROMFS file system
9001 - Add poll support for Unix stream sockets. From Jussi Kivilinna.
9002 - Enhancements to NSH ifconfig for case of multi-link operation, TUN
9004 - Enhanced output to NSH ping command from Max Neklyudov.
9005 - The NSH mount command now recognizes the Union filesystem type when
9010 - apps/netutils/thttpd/ and apps/examples/thttpd/: Add support for
9018 - Modify/simpify apps/examples build files. From Roman Saveljev.
9019 - apps/examples/ltdc: Add testing support for the STM32 LTDC's 2D DMA.
9021 - apps/examples/ostest: Add a test of nested signals. There are no
9024 - apps/examples/elf: Add configuration options to support building the
9027 - apps/examples/unionfs: Add a test of the union file system to
9035 realization of Unix-style user processes in NuttX. There is more to
9039 * XMega: There are some fragments in place for an XMega port. That
9043 ChangeLog for the complete list of bugfixes and for additional, more
9048 - boardctl(): Add missing case causing that caused failures of PWM
9050 - pthread_kill(): Re-implemented pthread_kill(). It was just a simple
9052 for multi-threaded task groups has been implemented, calling kill()
9055 to the specific pthread and no other.
9056 - uint32_t callbacks: Update the type passed to watchdog timer
9057 handlers. Using uint32_t is a problem for 64-bit machines because
9060 - mq_timedreceive(): move the location where the errno value is set;
9063 - POSIX message queues: Move mq_setattr() and mq_getattr() from
9065 for mq_setattr() and mq_getattr(). This is necessary in protected
9072 - MTD: Increase the size of the fields in the geometry structure
9077 - poll(): Fix resource leak and memory corruption on poll failure.
9082 - LPC31xx and SAMA5Dx EHCI: Fix cache related problem in LPC31 and
9094 - All USB device class drivers: There needs to be a check to make
9101 - TCP: Correct failures in long Telnet sessions by increasing th
9105 - Network locks: Correct some network lock logic: Two error
9108 - Local Sockets: Local stream sockets had problem of double releasing
9110 pipe pair being closed in multi-client case. Solve by adding per
9112 - TCP: Fix an important TCP networking bug: 16-bit flags was being
9113 converted to 8-bits in a few locations, causing loss of status
9115 - TCP: net_startmonitor() always returned OK. In the race case
9122 - setsockopt() failed when setting timeouts to values less tha 100
9129 non-zero remainder to the next larger whole decisecond value. Bug
9131 - TCP: In the TCP connection operation, it was trying to setup the
9134 and the TCP state is not yet correct for a connected socket. However,
9142 - SAM4CM and SAMA5D Free-running timer: Logic that samples the free
9150 - SAM3/4 Serial: When reconfigured, serial does not receive bytes
9157 - LPC176x GPIO: Reorder steps when an output GPIO is configured in
9160 - LPC17 USB OHCI: Correct some initialization of data structures.
9163 - LPC17xx Ethernet: Review, update, and modify the Ethernet driver so
9170 - EFM32 SPI: Add missing SPI GPIO pin initialization. From Pierre-noel
9175 - STM32 F3: Added missing EXTI definitions for the STM32 F3; Correct
9181 - STM23 RTC: Fix an error introduced into stm32_pwr_enablebkp().
9184 - STM32 RTC counter: Now need to enable backup domain write access
9186 - STM32 OTG FS and HS: Added protection in the event that out-of-bound
9191 - STM32F429i Disco: (1) Fix a bad return value if the LCD driver is
9199 - Fixes for Tiva TM4C1294NCPDT. From Frank Sautter.
9203 - SAMV7 TWIHS: Fix SAMV TWIHS logic that performs multi-message
9208 - SAMA5 CAN: Fix SAMA5 CAN frame construction. From Max Holtzberg.
9212 - stdlib.h: MAX_RAND should be RAND_MAX.
9213 - assert.h: Wrap definitions of assertion macros in do while so that
9217 - inetntoa(): Correct errors in printing IP address when type char is
9222 - Tools: Fix test for the existence of the apps/ directory in
9223 configure.c. Fix backward interpretation of options, -l was selecting
9224 Windows and -w was selecting Linux. This was SourceForege Ticket #39.
9228 - apps/nshlib/nsh_timcmds.c: Check return values from time functions.
9229 - apps/nshlib/: Fix handling of gmtime_r return value in time commands.
9234 - apps/netutils/ntp: Fix mismatched sched_lock/unlock. Noted by Juha
9239 - apps/examples/nxlines: Fix missing right bracket that causes
9241 - apps/examples: When boardctl() fails, need to print errno not the
9242 returned value which will always be -1.
9243 - apps/examples: Correct use of the BOARDIOC_GRAPHICS_SETUP boardctl()
9246 NuttX-7.11 Release Notes
9247 ------------------------
9250 and is available for download from the Bitbucket.org website. Note
9251 that release consists of two tarballs: nuttx-7.11.tar.gz and
9252 apps-7.11.tar.gz. These are available from:
9257 Both may be needed (see the top-level nuttx/README.txt file for build
9264 - clock_gettime(): Use up_timer_gettime for CLOCK_MONOTONIC in
9266 - waitpid(): Implement WNOHANG for waitpid() only and for the case of
9268 - SCHED_SPORADIC: Add a sporadic scheduler to NuttX.
9269 - Extend the processor-specific interface to include information to
9271 - sem_tickwait(): Added this function for internal use within the OS.
9272 It is a non-standard but more efficient version of sem_timedwait()
9273 for use in higher performance device drivers.
9279 - Graphics: Implement anti-aliasing in order to clean the drawing of
9280 all edges. Anti-aliasing is supported in the horizontal, raster
9282 - SSD1306 LCD Driver: Modify the SSD1306 LCD driver to support either
9287 - mount: Add the ability to mount a file system on top of en existing
9288 node in the pseudo-file system.
9289 - epoll(): Add a very simple epoll layer just around poll calls. To
9294 - IOCTL: Add relay IOCTL definitions. From Max Neklyudov.
9295 - I/O Expander Framework: Add an I/O expander driver framework. From
9297 - NXP PCA9555 I/O Explander. Add PCA9555 driver.From Sebastien
9299 - BMP180 Barameter: Add support to Bosch BMP180 barometer. From
9301 - CAN IOCTLs: Add CAN IOCTL command definitions to manage CAN message
9303 - CAN Driver: Add configuration to support DLC to byte conversions
9304 needed for CAN FD mode.
9305 - SPI Slave Interface: Add a definition of an SPI slave interface.
9306 - LM92 Temperature Sensor: Add a driver for the LM92 temperature
9308 - AS5048B Rotary Magnetic Sensor: Add support for an AS5048B rotary
9310 - Ramtron Driver: Update to include supportf for newer RAMTRON parts.
9312 - MB7040 Sonar Driver: Add support for a MB7040 sonar driver. From
9314 - ms5805 Altimeter Driver: Add support for an MS5805 altimeter. From
9319 - DNS Client: Implement the low-level network DNS packet protocol to
9321 - NetDB: Add support for a DNS host name resolution cache. This can
9324 - NetDB: Name resolution logic now supports lookups from a file like
9326 - Network Initialization: Add CONFIG_NETDEV_LATEINIT that can be
9329 - FTMAC100 Ethernet MAC Driver. Add support for Faraday FTMCA100
9331 - UDP Networking: Add support for send() for connected UDP sockets.
9335 - Add CFB and MAC AES modes. From Max Neklyudov.
9339 - Simulation: Implement board_power_off() for the simulation platform.
9340 This allows for a graceful exit from the simulation.
9344 - MoxaRT SoC: Add support for MoxaRT SoC found in the most Moxa serial
9349 - Moxa NP51x0: Moxa NP51x0 series of 2-port advanced RS-232/422/485
9352 * ARMv6-M:
9354 - ARMv6-M Assertions: Port some per-process stack dumping logic from
9355 ARMv7-M to ARMv6-M. From Alan Carvalho de Assis.
9359 - SAML21: DMA: Add SAML21 DMA support.
9360 - SAMD21: Add architecture support for the SAMD21 family.
9361 - SAMD21-Xplained: Board configuration for the SAMD21 Xplained board.
9365 - SAM4E: Add default loop optimization if EEFC_FMR is available in the
9366 configuration (i.e., for SAM4S and 4E). From Marco Aurélio da Cruz.
9367 - crypto/ and SAM4CM: Add CFB and MAC AES modes. From Max Neklyudov.
9368 - SAM3/4: Add a TWI driver for the SAM4CM. From Max Neklyudov.
9372 - Kinetis: Add support for MK20DN--VLH5 and MK20DX---VLH5. Needed
9373 for backward compatible support for Teensy-3.0.
9377 - Teensy 3.x: Add board support for the PJRC Teensy-3.0 and
9378 Teensy-3.1 boards.
9382 - SAMV7: Add an MCAN driver for the SAMV7 platform.
9383 - SAMV7 SPI Slave Driver: Add the an SPI slave driver.
9387 - STMicro STM32 F7: Add architecture support for the STMicro STM32
9389 - STM32 F446: Add support for the STMicro STM32 F446. From David
9394 - STM32 F7: Add an STM32 F7 Ethernet driver.
9395 - STM32 F7: Port the STM32 F4 DMA driver.
9396 - STM32 F4 ADC: Add DMA support to the ADC driver for STM32 F4. From
9401 - STM32F762G-Disco: Add support for the STMicro STM32 F7 Discovery
9403 - STM32F4-Disco: Add support to BMP180 driver on the STM32F4 Discovery.
9408 - Add asctime(), asctime_r(), ctime(), and ctime_r().
9409 - sethostname(): Add support for sethostname().
9410 - gethostbyname() and gethostbyaddr(): Add support for
9411 gethostbyname() and gethostbyaddr(). Also support included for the
9412 non-standard gethostbyname_r() and gethostbyaddr_r(). This moves
9417 - testbuild.sh: Add a script that can be used to perform building
9418 testing for several board configurations.
9422 - apps/ Build System: No longer depends on hardcoded lists of
9428 - mkkonfig.sh: Add the tool mkkconfig.sh that dynamically builds the
9430 configuration file has been removed and now the top-level Makefile
9431 executes tools/mkkconfig.sh to auto-generate the top-level Kconfig
9433 this operation. Now you do not have to modify the top-level Kconfig
9434 file to add a new directory into the configuration; the top-level
9439 - mkkconfig.bat: Add the Windows script corresponding to
9440 apps/tools/mkkconfig.sh. Needed for a Windows native build.
9444 - NSH shutdown command: NSH will now support an (optional) shutdown
9448 - NSH uname command: Add support for a uname command.
9449 - NSH nslookup command: Add an nslookup command.
9453 - NetDB: Add a system command to access the network database.
9454 - readline(): Add support for Unix-style tab complete to readline.
9456 - readline(): Extended the tab-completion support to also expand NSH
9458 - readline(): Add support for an in-memory command line history that
9464 - DNS client: Moved the DNS client logic into the NuttX C library.
9465 It is a necessary part for the full implementation of the netdb logic
9467 - Replace calls to the non-standard dns_gethotip() with calls to
9469 - NetLib: Create netlib wrapper functions around dns_getserver() and
9475 - OS test: Extend the OS test to include a test of
9476 pthread_mutex_trylock() for recursive mutexes. From Juha Niskanen.
9477 - OS test: Add a test for the sporadic scheduler.
9480 ChangeLog for the complete list of bugfixes and for additional, more
9485 - pthreads: Use -1 instead of 0 as PID for unclaimed mutexes. From
9487 - pthreads: Implement pthread_mutex_trylock() for recursive mutexes.
9489 - pthread_create(): Group binding needs to be cleared before
9491 group->tg_nmembers decremented or group being released. group_leave()
9494 - Protected Mode User Memory Allocator: Redesigned how the user space
9507 - pthread_create(): Fix an (unlikely) error in fallback value in the
9512 - STMPE811 Driver: In stmpe811_instanciate() when
9516 - CAN driver: Fix an issue in the CAN driver where the rx_sem count
9521 - NFS client: Fix prototype of unbind method. The function prototype
9522 was not updated for NFS after a recent change to the file system
9527 - netconfig.h: Fix some backward compilation that was emitting #error
9529 - SLIP Driver: Fix a missed name change when many of network
9531 updated for SLIP.
9532 - Networking: Allow receipt of empty UDP packets. From Max Neklyudov.
9534 * ARMv6-M:
9536 - ARMv6-M: Fix Cortex-M0 assembly error when the interrupt stack is
9541 - SAMD20, D21, L21: In the SAML21, SERCOM5 uses a different SLOW clock
9545 - SAMD/L: Several fixes to register definitions and types. From
9550 - SAM3/4 UART: Back out an error introduced with commit
9553 - SAM4CM: Fix SUPC register definitions. From Max Neklyudov.
9554 - SAM3/4 WDT: Correct some problems with SAM3/4 watchdog driver.
9559 - SAMV7 UART: Also back the bad cloned change o sam_lowputc.c for
9564 - LPC4350: Correct some LPC4350 GPIO pin configurations. From
9569 - EFM32 SPI: Correct write to incorrect register in EFM32 SPI driver.
9570 From Pierre-noel Bouteville.
9574 - STM32 F15x: STM322 F15x stm32_stdclockconfig() was calling
9577 - STM32 Ethernet: Extend STM32 Ethernet operating frequency to 180MHz.
9582 - SAMV7 Xplained: In clock configuration, divider was set to 25 to get
9587 * ARMv7-A:
9589 - Cortex-A5 vfork(): Fix a Cortex-A compilation error when system
9594 - SAMA5Dx EHCI: Fix some bad conditional compilation that left a
9599 - getopt(): Uninitialized variable can cause hardfault from getopt()
9604 - NSH/THHPD: Change decoding to handle the increased size of the
9609 - THTTPD: Fix compilation problems when
9611 - THTTPD: Missing gci-src as a dependency path when building with
9616 - poll() example: Fix a few bit-rot compilation errors.
9617 - Nx Lines example: If CONFIG_NX_ANTIALIASING=y, then the nxlines
9620 applying the anti-aliasing algorithm twice. A better solution
9621 would be to make anti-aliasing an option for each graphics call so
9622 you would rend the line with anti-aliasing ON and clear it with
9623 anti-aliasing OFF. but I don't have the wherewithal for that change
9625 - OS test: Improve synchronization in round robin tests. On very fast
9630 NuttX-7.12 Release Notes
9631 ------------------------
9634 and is available for download from the Bitbucket.org website. Note
9635 that release consists of two tarballs: nuttx-7.12.tar.gz and
9636 apps-7.12.tar.gz. These are available from:
9641 Both may be needed (see the top-level nuttx/README.txt file for build
9648 - Added SSD1351 OLED controller support. Contributed by Paul
9653 - MS58xx: Generalize the MS5805 altimeter driver to support other
9655 - CAN driver interface: Add an error indication bit to the CAN
9657 - Developed a new interface for QSPI. Most QSPI hardware (such as the
9659 That programmed interface is no compatible with the simpler NuttX
9661 - Added a driver for ST25L1*K QuadSPI parts.
9662 - Renamed the battery driver interface to battery_gauge since it
9665 - Added a new framework to support a batter charger interface. From
9667 - Added a BQ24250 battery charger driver. From Alan Carvalho de Assis.
9671 - Added support for the local loopback device (dev lo, hostname localhost).
9672 - Added NetDB support for the local loopback device.
9673 - Network initialization: Automatically initialize all the TUN and
9678 - The simulation now runs under Cygwin64. Modern Cygwin X86_64
9679 machines follow the Microsoft ABI for parameter passing. The Linux
9680 System 5 ABI would not work on X86_64-based Cygwin machines. Newer
9681 Cygwin tool chains do nor pre-pend symbol names with the underscore
9686 - Added architectural support for the Atmel SAMA5D2 parts. Not fully
9691 - Added support for the Atmel SAMA45D2 Xplained Ultra board. Not
9696 - SAMV7 USBHS DCD: The device controller driver is (finally)
9701 - Implement options to use external SDRAM and or SRAM for the heap.
9706 - Added architectural support for the LPC4370. From Lok Tep.
9710 - Added Ethernet support. From Ilya Averyanov.
9711 - Added LPC43xx EHCI driver from Ilya Averyanov.
9715 - Added support for the NXP LPC4370-Link2 development board from Lok
9720 - Added architectural for STM32F303K6, STM32F303K8, STM32F303C6,
9726 - Added OTG support for STM32F44x. From David Sidrane.
9730 - Added support for the STMicro Nucleo F303ERE board from Paul
9735 - stdlib: Add support for div() to the C library. From OrbitalFox.
9738 - Added an implementation of the standard shutdown function.
9742 - tools/mksymtab: declare g_symtab array as const to occupy RO section
9747 - Simplify configs/ Makefiles by combining common logic into a new
9752 - apps/system/symtab: Optional canned symtab inclusion to the build.
9762 - apps/canutils/uavcan: Add support for libuavcan. From Paul Alexander Patience.
9766 - apps/examples/can: Extend the CAN loopback test by adding more
9768 - apps/examples/usbserial: Can now be run as an NSH builtin-function.
9770 - apps/examples/nettest: Add option to suppress network initialization.
9773 - apps/examples/nettest: Extend test so that can be performed using
9775 - apps/examples/netloop: Add a test of the local loopback device.
9776 - apps/examples/udpblaster: Add a test to stress the network by
9778 - apps/examples/uavcan: libuavcan example from Paul Alexander Patience.
9781 ChangeLog for the complete list of bugfixes and for additional, more
9786 - wd_create(): Correct a counting error in the number of available
9789 - mq_open(): When message queue is opened, inode_reserve() leaves the
9792 - work_queue(): Logic that sets the queued indication and the logic
9797 - Fix a memory leak in the built-in application logic: File was not
9802 - poll(): If we fail to setup the poll for any file descriptor, for
9804 - rwbuffer: Fix some logic errors. From Dmitry Nikolaev via Juha
9806 - ROMFS: One allocation was not being freed if there was a subsequent
9812 - Fix a bug in tun interface driver. From Max Neklyudov.
9813 - recvfrom(): Correct wait for new data when NET_UDP_READAHEAD is
9815 state.rf_recvlen == -1. I have not checked if data are accumulated
9817 - networking: Correct return value from psock_tcp_accept(). From
9819 - TCP: Fix a problem in when there are multiple network devices.
9827 - net/tcp: The logic that binds a specific network device to a
9828 connection was faulty for the case of multiple network devices. On
9834 - net/tcp: Fix unbuffered send compilation error when Ethernet is not
9837 * ARMv7-M:
9839 - All ARMV7-M IRQ setup: Always set the NVIC vector table address
9844 - Fix some H/W floating point logic: In the original implementation,
9849 - ARMv7-M, all "lazy" interrupt stack logic. Assembly instruction
9853 - All ARMV7-M: Force 8-byte stack alignment when calling from assembly
9855 - up_schedulesigaction(): Fix logic that determines if there is a
9858 problem was fixed on the ARMv7-M but also ported to other
9863 - LPC43xx: Fix NVIC_SYSH_PRIORITY_STEP define. From Ilya Averyanov.
9864 - LPC43xx: Fix missing #define in eeprom. From Ilya Averyanov.
9868 - Fixed the SPI driver. From Ilya Averyanov.
9872 - LPC31 and SAMA5D EHCI: Fix qh_ioccheck to move bp to next QH. From
9874 - LPC31 and SAMA5D EHCI: Performance improvement: Do not disable the
9880 - gethostbyname(): correct returned address format when DNS is used.
9882 as defined in the standard. Original implementation used that for
9883 numeric addresses but for DNS lookup returned pointer to whole
9885 - asin(): The function did not convert for some input values. asing()
9886 did not convert for values which do not belong to the domain of the
9887 function. But aside of that the function also did not converge for
9890 the domain of the function. This is a fix for the problem but the
9893 - Change all references from avsprintf to vasprintf. From Sebastien
9898 - Fix error handling in 'cat' command. On a failure to allocate
9900 - Fix error handling in 'mv' command. On a failure to expand the
9901 second path, the memory allocated for the expansion of the first
9906 - apps/system/netdb: Failed to build if CONFIG_NET_HOSTFILE was not
9912 - Various Kconfig files in netutils: Fix some changes from from
9917 - Macros PR_BEGIN_EXTERN_C and PR_END_EXTERN_C were not defined in
9920 NuttX-7.13 Release Notes
9921 ------------------------
9924 and is available for download from the Bitbucket.org website. Note
9925 that release consists of two tarballs: nuttx-7.13.tar.gz and
9926 apps-7.13.tar.gz. These are available from:
9931 Both may be needed (see the top-level nuttx/README.txt file for build
9938 - External RTC: Added OS support for external RTC chips.
9939 - boardctl(): Add a command to the boardctl() interface to obtain a
9944 - TMPFS: Add support for a new TMPFS, RAM file system. The TMPFS
9949 - VFS: The VFS was extended to support standard file operations on
9953 - HOSTFS: Added a HOSTFS file system for use with the simulator. The
9955 proxied access to the file system on the host PC. This is useful for
9958 - MTD/PROCFS: Add an interface to un-register an MTD procfs entry.
9960 - filemtd: A new MTD conversion layer that will convert a regular file
9961 (or driver file) to an MTD device. This is useful for testing on the
9963 - PROCFS: Extended to include networking entries in the procfs. Device
9966 - PROCFS: The PROCFS file system can now be configured so that it
9972 - ST7565 Driver: Extend to include support for the ERC12864-3. From
9973 Pierre-noel Bouteville.
9977 - User buttons: Added a character driver to support application access
9980 - User LEDs: Added a character driver to support application access
9981 to on-board LEDs.
9982 - Zero Cross: Added a Zero Cross device driver support. From Alan
9984 - MAX6675: Added support to Thermocouple-to-Digital converter MAX6675.
9986 - BCH: Block-to-character (BCH) driver should forward ioctl() calls
9988 - S25FL1xx: Added a S25FL1xx QuadSPI FLASH driver.
9989 - On-Chip FLASH: Added an upper half MTD device that can use the
9992 - Serial: Implemented high level DMA infrastructure for serial
9994 - AT24XX: Add support for multiple AT24xx EEPROM parts, each with
9996 - External RTC: Added drivers for external I2C RTC chips: DS3102,
9998 - W25: Added support for byte write mode to the W25 FLASH driver. From
10000 - dev/loop: Added a loop character device. losetup() and loteardown()
10003 - dev/smart: Added support for a /dev/smart loop device. From Ken
10008 - Driver Statistics: Most network drivers do not support statistics.
10011 there was no common mechanism to view those statistics. Thus,
10020 - W25 FLASH: Added support for W25 FLASH simulation. From Ken Pettit.
10021 - HOSTFS: Added support for the HOSTFS file system (see "File Systems",
10026 - SAME70: Added support for the SAME70 family of chips.
10027 - Tickless: SAMV7 now supports the tickless mode of operation.
10031 - MPU: Added MPU and protected build support.
10032 - QSPI: Added a QuadSPI FLASH driver. This driver operates in the
10033 memory-mapped, Serial Memory Mode (SMM).
10034 - FLASH: Added support to write on-chip FLASH.
10035 - Timer/Counter: TC driver ported to SAMV7 from the SAMA5. Free-running
10036 and one-short timer logic also ported.
10037 - PCK: Brought programmable clock (PCK) logic from SAMA5 into SAMV7.
10038 - Timer/Counter: Support PCK6 as an optional source for the timer/
10043 - SAME70-Xplained: Add NSH and networking configurations for the
10044 SAME70 Xplained board. Includes verified support for serial console,
10046 - SAMV7-XULT and SAME70-Xplained: If Tickless mode is selected then
10051 - CCM PROCFS: Is no longer a part of the 'base' procfs entries and can
10057 - Timers: Add a compatible lower-half timer driver for use with the
10058 common timer upper-half driver. From Wail Khemir.
10062 - STM32F4-Discovery: Add low level support for the Zero Cross driver
10063 for the STM32F4-Discovery. From Alan Carvalho de Assis.
10064 - STM32F4-Discovery: Add board config to support for the MAX6675. From
10069 - bsearch(): Added the bsearch() function from NetBSD.
10070 - freopen(): Added support for freopen().
10071 - strftime(): Added day-of-week support (when available).
10075 - nxstyle: Add crappy style checking tool nxstyle.c. See thee tools/
10076 README file for more info.
10080 - mksmartfs command: Add configuration option to supported multiple
10082 - Add support for 'basename' and 'dirname' commands.
10083 - set command: Like bash, NSH set command now strips off any leading
10085 - mount command: The mount commands now accepts mount options
10086 (currently needed only for the hostfs file system). From Ken
10088 - losetup command: NSH no longer calls losetup() and loteardown
10091 - ifconfig command: If CONFIG_NETDEV_STATISTICS=y, then print the
10093 - ifconfig, ifup, and ifdown: These commands now uses /proc/net/<dev>
10098 - losmart command: Added a new NSH losmart command. losmart setups
10099 up a loop device for the smart MTD driver similar to losetup but
10101 - ps command: The 'ps' command now uses /proc/<pid>/ to obtain task
10107 - apps/system/hexed: Port the hexed command line hexadeciamal editor
10112 - apps/fsutils/smartfs: Move into apps/fsutils from kernel, now uses
10117 - apps/examples/fstest: Add a generic file system test. This is
10119 specific logic ripped out. This was created for testing the new
10121 - apps/examples/zerocross: Add a Zero Cross application example. From
10123 - apps/examples/media: Add a simple test for access of media via a
10127 ChangeLog for the complete list of bugfixes and for additional, more
10132 - Fixed an error in clock_timespec_subtract(). Found by Lok.
10133 - pthreads: CRITICAL BUGFIX: Logic was wiping out the indication that
10140 - SMART MTD: Fix some Smart wear-leveling bugs. Fixed SmartFS wear
10149 - ILI9432: Fixed errors in orientation. Portrait, RPortrait, and
10155 - CAN: Fix a problem in the CAN upper-half driver that occurs only
10156 for CAN hardware that support a H/W FIFO of outgoing CAN messages.
10158 S/W FIFOs are both full. In that case, there may be no event to
10162 - MS58xx: Fix some issues with initialization and with CRC
10164 - W25: Fixed W25 FLASH driver page read/write logic. From Ken Pettit.
10168 - USART1 pin configuration: Reconfigure System I/O when using USART1.
10170 - MCAN: Added a call to can_txready() to the MCAN driver.
10174 - stm32 F4: Fix some TIM12 pin mappings. From Max Kriegleder.
10178 - STM32F429i-Disco: Calculated partition boundaries based on page
10184 - sys/types.h: When building on a 64-bit machine, the size of size_t
10185 should be 64-bits. In general, I believe that sizeof(size_t) should
10186 be the same as sizeof(uinptr_t). mmsize_t should always be 32-bits
10189 64-bit machine.
10193 - The I/O buffer, g_iobuffer, should not be a global buffer. That
10196 session-specific data defined in nsh_console.h.
10198 NuttX-7.14 Release Notes
10199 ------------------------
10202 and is available for download from the Bitbucket.org website. Note
10203 that release consists of two tarballs: nuttx-7.14.tar.gz and
10204 apps-7.14.tar.gz. These are available from:
10209 Both may be needed (see the top-level nuttx/README.txt file for build
10216 - modules: Add support for kernel modules: insmod, rmmod, support
10217 functions. procfs support for user lsmod functioniality.
10218 - SIGEV_THREAD: Add support for the SIGEV_THREAD notification method
10220 the FLAT build since it utilizes the work queue for signal
10221 callbacks. See the top-level TODO file for additional details.
10222 - 64-Bit Timer: If the 64-bit timer is selected, then use it whenever
10223 clock_systimer() is called rather then chopping the 64-bit timer
10224 down to 32-bits. Add a new type, systime_t to represent the 32- or
10225 64-bit system timer. This eliminates clock_systimer32() and
10230 - Telnet Driver: Move the Telnet driver from apps/ to
10236 - PCA9635PW: Add a driver for the PCA9635PW I2C LED driver IC which
10239 - MCP9844: Driver for the MCP9844 I2C digital temperature sensor with
10241 - PN532: Add driver for the NXP PN532 NFC-chip. From Janne Rosberg
10243 - LSM9DS1: Add driver for the STMicro LSM9DS1 chip. The LSM9DS1 is a
10244 system-in-package featuring a 3D digital linear acceleration sensor,
10247 - CAN Interface: Add more extensive error reporting capaibility to
10249 - SPI Interface: Add an optional hwfeatures() method to the SPI
10254 - NSH configuration uses the custom start up scriptwith a read-only
10255 passwd file. Includes hooks for an MOTD message.
10257 * ARMv7-R
10259 - ARMv7-R: Add basic architecture support for the ARMv7-R processor
10264 - Atmega2560: Add support for the Atmega2560. From Dimitry Kloper.
10265 - debug.h: Add an AVR-specific header file used when the AVR MEMX
10270 - Arduino-Mega2560: Add support for the Arduino-Mega2560. From
10275 - Port the TRNG driver from the SAMA5D3/4 to the SAMV7.
10276 - Port the WDT driver from the SAMA5D3/4 to the SAMV7.
10277 - Add an RSWDT driver.
10281 - SAMV71-XULT: Add configuration for testing OS modules.
10285 - MK60N512VLL100: Add support for the MK60N512VLL100 Kinetis part.
10290 - ENET: Numerous updates to the Kinetis ENET driver. That driver is
10295 - WaveShare LPC4337-WS: Support for the WaveShare LPC4337-WS board.
10300 - Timer Capture: Add timer input capture driver. From Pierre-Noel
10305 - Olimex STM32 H407: Added a port to the Olimex STM32 H407 board.
10311 - TI LaunchXL-TMS57004: Add basic board support for TI LaunchXL-
10316 - sys/time.h: Add timeradd(), timersub(), timerclear(), timerisset(),
10317 and timercmp() as macros. These are non-POSIX interfaces, but
10319 - AVR support: Introduce support for Atmel toolchain in-flash strings.
10320 Atmel toolchain AVR compiler provides a transparent in-flash object
10322 compiler that this is a flash-based object. The later used with
10324 flash or in RAM. The compiler automatically makes 32-bit pointer
10326 and generates code to access either in run-time. Thus, any function
10329 For platforms with a Harvard architecture and a very small RAM like
10331 to flash in the instruction address space, releasing resources for
10334 Harvard architecture machine. For platforms that do not have __flash
10336 types equivalent to, for example, 'const char' and 'const char*'.
10337 For Atmel compiler these will become 'const __flash char' and
10341 - debug.h: Add configuration to support an architecture-specific
10343 - netdb: Add support for the use of a DNS resolver file like
10345 - TEA: Add an implementation of the Tiny Encryption Algorithm.
10346 - math32.h: Add some utilities to support 64-bit arithmetic
10347 operations for platforms that do not support long long types.
10351 - tools/cnvwindeps.c: Add a tool that will convert paths in
10354 - tools/mkwindeps.sh: A script that coordinates use of cnvwindeps.exe.
10360 - Module Commands: Add module commands: insmod, rmmod, and lsmod.
10361 - Time Command: Add a 'time' command that may be used to time the
10363 - Password Commands: Add useradd, userdel, and passwd commands.
10364 - MOTD: Now supports a Message of the Day (MOTD) that will be
10366 - Session Logins: All sessions may be protected with logins using the
10368 - Extended Logins. Added optional platform-specific function to
10374 - apps/fsutils/passwd: Utility library for accessing a password file
10379 - apps/netutils/telnetd: Now creates Telnet sessions by opening a new
10382 - apps/netutils/netlib: Add netlib_get_dripv4addr() and
10387 - apps/examples/module: Add a test harness for verifying NuttX kernel
10389 - apps/examples/pca9635: Add a simple test of PCA9635PW PWM LED driver.
10391 - apps/examples/ostest: Add a test of POSIX timers using SIGEV_THREAD.
10394 ChangeLog for the complete list of bugfixes and for additional, more
10399 - pthreads: CRITICAL BUGFIX: Logic was wiping out the indication that
10401 - waitpid: CRITICAL BUGFIX. Add a reference count to prevent waitpid
10402 from using stale memory released by the waited-for task group.
10403 - clock_systimespec(): Fix an error in a time conversion.
10407 - poll(): Fix handling of sem_tickwait() return value sem_tickwait()
10408 does not return an -1+errno, it returns a negated errno value.
10413 - TUN Driver: Fix a compile time error in the TUN driver. From
10415 - USB Host HID Parser: Wrong size used in memcpy(). From Hang Xu.
10416 - PCA9555: Fixed a bug in the function pca9555_setbit which occurs if
10417 someone tries to set one of the pins 8-15. The problem is that
10427 - TCP/IOB: Numerous fixes, mostly relate to TCP and IOB buffering
10428 and race conditions. These were necessary for for the NuttX
10434 - USBHS Device: In USBHS device driver, fix check if zero length
10439 - OTG FS Host: Fix some backward arguments to stm32_putreg(). Note
10444 - tools/mkdeps.c: Extended/fixed support for --winpath option.
10449 - apps/platform/Makefile: Use a relative path to the board directory
10450 link rather than the absolute path. For Cygwin, the absolute would
10454 NuttX-7.15 Release Notes
10455 ------------------------
10458 and is available for download from the Bitbucket.org website. Note
10459 that release consists of two tarballs: nuttx-7.15.tar.gz and
10460 apps-7.15.tar.gz. These are available from:
10465 Both may be needed (see the top-level nuttx/README.txt file for build
10472 - Add a state variable that provides the current level of OS
10474 run early in the start-up sequence but cannot run if a sufficient
10476 - Spinlocks: Add interface definitions for to support spinlocks as
10477 needed for multi-CPU configurations.
10478 - SMP support. Support for Symmetric Multi-Processing (SMP) added.
10481 interfaces to support CPU initialization and inter-actions, and
10487 Only partially verified; awaiting hardware for the complete
10489 - TLS: Basic definitions needed to support thread local storage
10492 - Performance Monitoring: Add a configuration option to buffer
10493 RTOS instrumentation data in an in-memory buffer.
10494 - boardctl(): Add boardctl() support that will permit applications
10499 - procfs: Add /proc/kmm entry that shows that state of the kernel
10502 - procfs: Add support for showing CPU in the taste status if SMP is
10507 - ARP: Add support for IOCTL commands to manage the ARP table.
10508 - IEEE 802.15.4 and 6LowPAN: There are some radio drivers and a
10511 NuttX repositories. Hopefully in NuttX-7.16.
10515 - ADS1242: Driver for the 24-Bit Differential Input ADC ADS1242 that
10520 - U-Blox Modem: Add an upper half driver for the U-Blox Modem. From
10522 - I2C: Add an I2C, "upper half", character drivers to support raw I2C
10523 data transfers for test applications.
10524 - RGB LED: Add a driver to manage a RGB LED via PWM. From Alan
10526 - Performance Monitoring: Add a character driver that will allow an
10531 - SMP: Add multi-CPU support to the simulation to support SMP
10533 than perfect but sufficient for some very preliminary testing of
10536 * ARMv7-A, ARMv7-R, and ARMv7-M:
10538 - ARMv7-A, ARMv7-R, and ARMv7-M: Add test-and-set logic and
10540 - ARMv7-A: Added MPCOre Generic Interrupt Controller (GICv2) and
10542 - ARMv7-A: Now includes in MCU-specific hooks needed for SMP support.
10546 - HSMSI: HSMCI driver can now be configured to handle unaligned data
10551 - I2C: Backported the LPC43XX I2C driver, replacing the LPC11XX,
10557 - Support for the u-blox GSM and GPS module evaluation board with
10558 NXP LPCExpresso LPC1768. The GSM module is one of LISA-C200,
10559 LISA-U200 or SARA-G350. The GPS module is one of MAX-M7 or
10560 MAX-M8. From Vladimir Komendantskiy.
10564 - Basic support is in place for the i.MX6 Quad/Dual MCUs.
10565 Verification is, however, waiting for the receipt of hardware.
10569 - Sabre-6Quad: Basic support for the NXP/Freescale Sabre 6Quad
10570 board is in place but waiting for hardware for verification.
10574 - STM32F46xx: Support for STM32F46xx from Paul Alexander Patience
10575 - STM32L4: Add support for the STM32L4 family. From Sebastien
10580 - STM32F4 Discovery: Add PWM support for the onboard RGB LED. From
10582 - Nucleo-L476: Add support for the Nucleo-L476 board. From Sebastien
10584 - STM32L476VG Discovery: Add support for the STM32L476VG Discovery
10589 - tools/refresh.sh now has a --silent option so that it can be used in
10594 - Added a 'make olddefconfig' target that will refresh a .config file
10599 - 'arp': Add an 'arp' command that will support access to the OS ARP
10601 - 'ps': The 'ps' command will show CPU if SMP is enabled.
10605 - apps/netutils/chat: Chat logic contributed by Vladimir
10607 - apps/netutils/netlib: Add utility functions to support accesses to
10612 - apps/examples/chat: Chat example contributed by Vladimir
10614 - apps/system/ubloxmodem: Example to control the power
10616 - apps/examples/leds: An example to demonstrate use of LED driver.
10617 - apps/examples/smp: Add a test to verify SMP configurations.
10618 - apps/examples/rgbled: Example using the RGB LED driver to drive an
10620 - apps/examples/ostest: Add a test of TLS.
10621 - apps/examples/sched_note: Add a simple example to exercise the
10625 ChangeLog for the complete list of bugfixes and for additional, more
10630 - Signals: Move the list of signal actions from the TCB to the group
10634 - Semaphores: Add an internal, non-standard interface to reset a
10639 - Low-Priority Work Queue: Fix logic to find an IDLE worker thread;
10640 the test for busy was backward. From Linfei Chen.
10644 - FAT: Add an option to force all transfers to be performed
10646 This is a fix for the case where the user provided buffers are not
10647 properly aligned for DMA (as with THTTPD).
10648 - MTD: Increase block size in mtd_geometry_s to 32-bits.
10652 - I2C: Restructured the I2C interface as necessary to eliminate some
10653 thread-safety issues inherent in the legacy I2C interface design.
10654 This effects the interface definition, all I2C clients, and all low-
10658 - I2C_RESET: Eliminate up_i2creset(). It should not be a global
10660 - PCA555: Add logic to make the PCA555 driver thread safe.
10661 - syslog: If syslog timestamping is enabled, don't try to get the time
10663 - AT24xx driver: Correct missing address calculation logic. From Frank
10668 - Networking drivers that support CONFIG_NET_NOINTS: Fix a race
10671 - Timer Poll: Fix some logic when there are multiple network
10677 - SAMV7 USB HS device: The USB driver has had some issue that would
10679 put in for this but the fix apparently worsens the problem; now
10688 - tools/testbuild.sh: .config files were not being updated because
10689 (a) kconfig-conf was being called in the wrong directory and (b)
10695 - apps/system/i2c: The I2C tool now obeys it OS interfacing: it now
10697 - apps/system/cdcacm, usbmsc, and composite: Use new boardctl()
10702 - apps/netutils/dhcpd: DHCPD no longer calls directly into the OS but
10707 - apps/modbus/nuttx/portserial.c: Was not returning an error on
10712 - apps/examples/usbserial, composite, usbterm: Use new boardctl()
10714 still a few bad OS calls for USB device interfaces that do not yet
10719 - Moved C++ initialization logic out of the RTOS and into the
10723 NuttX-7.16 Release Notes
10724 ------------------------
10727 and is available for download from the Bitbucket.org website. Note
10728 that release consists of two tarballs: nuttx-7.16.tar.gz and
10729 apps-7.16.tar.gz. These are available from:
10734 Both may be needed (see the top-level nuttx/README.txt file for build
10741 - Power Management: Add activity domain to all PM interfaces and
10744 PM domains are supported. This will allow separate control for
10745 certain power management groups. For example, a network can be
10747 - board_app_initialize(): board_app_initialize() now accepts an
10753 - N25Qxxx: Add MTD support for Micron N25Qxxx family of QSPI flash.
10755 - SST26F: Add an MTD driver for SST26F spi/qspi flash devices (SPI
10757 - File Descriptor Detach: Add logic to detach a file structure from a
10758 file descriptor. This is for use only within the OS. It permits an
10763 - listen()/accept(): Separate out psock_listen() and psock_accepti()
10764 for internal, thread independent OS usage (i.e., without a socket
10766 - VNC Server: Add support for a VNC server. This logic is code
10771 - Framebuffer driver: Add a display number to each interface in order
10773 - VNC Server: Add support for a VNC server. This logic is code
10775 - LCD Backpack: Add support for PCF8574 LCD Backpack driver. This
10777 expander and supports the HD44780-based (or compatible) LCD modules.
10780 for I2C addresses. This driver supports known and unknown variants.
10785 - RTC: Simplify the RTC interface. The old interface was way too
10787 - BH1750FVI: Add a character driver for Rohm Ambient Light Sensor
10789 - CAN: Improve CAN error reporting. From Frank Benkert.
10790 - aes.h: Modifications to the crypto API needed for LPC43xx. From
10792 - ADC: Interface no longer uses global adc_receive() call. Added a
10794 driver will register its receipt-of-data callback. This change
10800 - Linux Host Networking: Enhance networking support for the
10801 simulation under Linux. Includes updated support for Linux TUN/TAP,
10802 and the addition of support for Linux bridge devices. From Steve.
10804 * ARMv7-A, ARMv7-R, and ARMv7-M:
10806 - ARMv7-M: Convert more assembly language files for use with the IAR
10808 - ARMv7-A: Complete re-design of SMP-related logic to initialize each
10813 - Add a JTAG config and ERASE config to Kconfig to set the
10815 - System Reset: Add the up_systemreset interface to the samv7 arch. The
10817 and allows the user to set if, and for how long, to drive External
10819 really should be done in the config's src if CONFIG_BOARDCTL_RESET
10824 - SAMV71-XULT: Add configuration(s) that were be used to verify VNC
10829 - Sabre-6Quad: The basic i.MX6 port is complete. This is a minimal
10830 port at present and probably still has some as-of-yet-undiscovered
10832 - Sabre-6Quad: Basic SMP NSH configuration is now working. But this
10835 Sabre-6Quad README.txt file.
10839 - LPC4337jet100: Add definitions for the LPC4337jet100 chip. From
10844 - AES: Add AES support. From Alexander Vasiljev.
10848 - STM32 L4: Add configuration options to allow SRAM2 to be used for
10849 heap, or not at all, and to zero-initialize it on OS start, or not
10851 - STM32 L4: Add support for HSE and MSI clocks, and auto trim of MSI
10852 to LSE (needed for USB). From Dave (ziggurat29)
10853 - STM32 L4: Add support for unique id function to arch; modified board
10858 - STM32 F4 RTC: Add a custom RTC driver with support for alarms. From
10860 - STM32 L4 QSPI: Add a QSPI driver with DMA support and (optional
10862 - STM32, STM32 L4, and STM32 F7 Serial: Add support for compliant
10863 SD-style breaks. From David Sidrane.
10864 - STM32 L4 CAN: Add CAN support for STM32L4. From Sebastien Lorquet.
10865 - STM32 1-Wire: Add support for a custom 1-wire driver. The serial
10866 driver already supports a 1-wire interface, but this driver uses the
10869 - STM32 L4 SPI: Add support for SPI 4 and 5 on stm32f411 chips. From
10871 - STM32 ADC: Allow omitting use of channels in a lower part of PWM.
10872 From Pierre-noel Bouteville.
10873 - STM32 L4 I2C: Get I2C working for STM32L4. From Dave (ziggurat29).
10877 - STM3220G-EVAL: Add support for both the IAR and uVision GCC IDEs.
10879 - STM32F429I Discovery: Add support for the uVision GCC IDE. From
10881 - STM32F4 Discovery: Integrate BH1750FVI driver in the STM32F4 Discovery
10883 - STM32L476VG Discovery: Add support for QSPI based N25Qxxx flash.
10885 - STM32L476VG Discovery: Add board ioctls for allowing user application
10887 partitioned QSPI flash for file system and other (eventually xip).
10889 - Nucleo-144: Basic port for the Nucleo-144 board with the STM32F746ZG
10891 - STM32F103 Minimum: Add support for this minimual STM32F103CBT6 "blue"
10893 - STM32F411E Discovery: Add basic configuration for stm32f411e-disco
10898 - Moved NuttX repository to https://bitbucket.org/nuttx/nuttx.
10899 Eliminated use of sub-modules.
10900 - Add support for the IAR toolchain for the limited case of the ARMv7-M
10902 - make export: Pass top-level make to the script to allow -j greater
10904 - fs/Kconfig: Allow CONFIG_FS_WRITABLE to be manually selectable. This
10905 is needed when there are no writable file systems, but write support
10907 - arch/*/Makefile: Add definitions that can be overrided to use GCC
10912 - apps/netutils/esp8266: ESP8266 driver application. From Pierre-noel
10917 - apps/examples/alarm: Add a simple test of the ALARM iotcl calls of
10919 - apps/examples/nximage: Add a configuration option to select
10924 - apps/platform/nucleo-144: Add platform files for NUCLEO-144
10925 (NUCLEO-F746ZG). From Mark Olsson.
10926 - apps/examples/media: You can now override the default device driver
10930 Works-In-Progress:
10932 * IEEE802.14.5/6LowPAN. Hooks and framework for this effort were
10933 introduced in NuttX-7.15. Work has continued on this effort on
10936 least NuttX-7.17.
10942 ChangeLog for the complete list of bugfixes and for additional, more
10947 - Various places: Search for places where a stray semicolon following
10950 - enter/leave_critical_section() may attempt to access task lists
10955 - SMART MTD: Return code of smart_scan not checked, can cause success
10958 - mount: Fix a backward debug assertion. Noted by David Sidrane.
10962 - NRF24L01: Fix backward calculation of relative frequency. Noted by
10964 - PCA9555 I/O expander: Fix an error in the PCA9555 driver: Under
10965 certain error conditions, interrupts were not being re-enabled.
10967 - ADS1255: Must not do SPI access from interrupt handler. Use the
10969 - Several SPI-based drivers modified. All drivers that use SPI must
10971 - MS583730: Fix a bug in crc computation for ms583730. Implement
10976 - Fix typo in MATRIX register definitions. From Stefan Kolb.
10977 - SAMV7 Tickless Mode: This is a fix to a problem in the handling of
10994 no optimization the problem vanishes without using the value of the
11007 - SAMA5: Stefan Kolb's change to the SAMV7 Oneshot Timer should also
11012 - SAM3/4: Stefan Kolb's change to the SAMV7 Oneshot Timer should also
11017 - SAMV7 TWIHS (as well as SAM3/4 and SAMA5: Ensure that the TWIHS
11021 while back in the stm32 family, so there may be more arch-es with
11025 - USBHS Device: Remove disabling of whole USB on suspend of USBHS.
11028 disabling the whole peripheral, the next wakeup-interrupt comes up
11029 with an disabled clocking. The unfreeze clock has no effect, because
11034 - MCAN: Fix missing unlock of device in MCAN mcan_txempty(). From
11039 - STM32 L4 Clocking: Problem with resetting backup domain clears
11048 - STM32L4 SPI: That STM32Lr SPI driver is quite different. They now
11050 before a new bit has to be set (RX fifo threshold) to handle <= 8-bit
11051 transactions. If not set, the default is 16-bit packed >=8-bit
11052 frames and the RXNE bit is never set (it is set when 16-bits are
11053 received). weird things as always. This also add 8-bit access
11054 routines to the data register, because a 16-bit access to the data
11057 - STM32: Correct some bad commits that broke the LTDC display example.
11059 - STM32 F4 RTC: Fix logic in F4 RTCC driver that prevent ALARM
11061 - STM32 F1 ADC: Fix STM32 ValueLine ADC IRQ number selection. From
11066 - STM32F429I Discovery: Correct some bad commits that broke the LTDC
11071 - GPIO Interrupts: Fix a bug of GPIO falling-edge interrupt for tiva.
11076 - math: Add a NAN test on 'x' in asin function of lib_asin.c. Suggested
11077 by Pierre-noel Bouteville.
11081 - Several Makefiles: Add .PHONY definitions to prevent 'clean up to date'
11082 message weirdness when 'make clean' is done with no .config or
11085 NuttX-7.17 Release Notes
11086 ------------------------
11089 and is available for download from the Bitbucket.org website. Note
11090 that release consists of two tarballs: nuttx-7.17.tar.gz and
11091 apps-7.17.tar.gz. These are available from:
11096 Both may be needed (see the top-level nuttx/README.txt file for build
11103 - drivers/mtd: Add a driver of IS25xP SPI flash devices. Based on
11108 - Break out internal interface psock_ioctl().
11112 - PTYs: Added support for pseduo-terminals: Device drivers that can be
11113 used for communications between tasks (usually with re-directed I/O).
11115 - Button upper half driver: Added support for poll().
11116 - CAN: Add support for poll. From Paul Alexander Patience.
11117 - GPIO: Add support for a simple GPIO driver. It supports only pre-
11121 - I/O Expander: Shadow-Mode: The output- and configuration registers of
11122 the IO-Expander are held in the microcontrollers memory and only
11123 written to the IO-Expander. This reduces bus traffic and is more
11124 error-proof than the normal read-modify-write operation. Retry Mode:
11125 If enabled and an error occurs while writing to the IO-Expander the
11128 - Pipes/FIFOs: Add support to allocating different sizes for pipe and
11130 and pipe(), but allow control of the size of the underlying, in-memory
11132 no longer core OS interfaces. Capability currently used only by PTY
11133 logic to support, configurable, smaller buffers for PTYs.
11137 - SYSLOG: Consolidated all SYSLOG logic in drivers/syslog. Added an
11144 usable with other-than-FLAT builds.
11145 - SYSLOG: syslog() will now automatically redirect output to
11147 - Extended SYSLOG logic so that we can send SYSLOG output to a file.
11148 - SYSLOG character device channel will now expand LF to CR-LF.
11150 - Add a SYSLOG character device that can be used to re-direct output
11153 - Debug features are now enabled separately from debug output.
11160 subsystem/device driver debug output at different output levels. For
11161 example, CONFIG_DEBUG_FS no longer enables file system debug output
11164 - Since the SYSLOG layer now automatically handles low-level vs.
11165 high-level output, the low-level (ll) variants of the debug macros
11167 - Reviewed all uses of *err(). These macro family should indicate
11170 - _alert(): New debug macro: _alert(). This is high priority,
11173 - Many CONFIG_DEBUG_* options did not have matching macros defined in
11180 - Added the simulated QSPI (N25Q) flash to the simulation and extended
11181 flash simulation capabilities to run with MTD drivers based on config
11186 - SPI: SPI-Freq. 40MHz; VARSELECT; hw-features This change adds the
11189 o Increase the allowed SPI-Frequency from 20 to 40 MHz.
11201 the first bit, between the last bit and the de-assertion of the
11204 o Add three "hw-features" for the SAMV7, which controls the behavior
11206 - force CS inactive after transfer: this forces a (short) de-
11209 - force CS active after transfer: this forces the CS to stay
11213 - escape LASTXFER: this suppresses the LASTXFER bit at the end
11214 of the next transfer. The "escape"-Flag is reset automatically.
11217 - TWISHS: Driver improvements from Michael Spahlinger.
11218 - GPIO-Driver fixed for Open-Drain Pins:
11221 back. This is extremely important for Open-Drain Pins, which
11223 o Re-Implemented twi_reset-function and enhanced it so it can be
11225 o Glitch-Filter: Added a configuration option to enable the twi-
11226 built-in glitch filter
11227 o Added a "Single Master Mode": In EMC Testing the TWI-Bus got
11228 stuck because the TWI-Master detected a Multi-Master access (but
11229 there is no second master). With the option "Single Master" we
11234 With the above changes I2C-Bus reliability in harsh environments (eg.
11235 EMC) is greatly improved. The small change in the GPIO-Driver was
11237 status of Open-Drain Outputs and this is needed by the twi_reset
11242 - EMC: Extend LPC43xx EMC code to support SDRAM on a dynamic memory
11247 - Kinetis K64: Add basic support for the K64 family. I leveraged the
11248 changes from https://github.com/jmacintyre/nuttx-k64f and merged
11254 - Add a KinetisUSB device controller driver. Derived from the pic32mx
11256 - Kinetis pwm support, based on the KL pwm driver. From kfazz.
11257 - Kinetis Ethernet: Add support for the KSZ8081 PHY.
11258 - Kinetis Ethernet: Modified Ethernet driver to try all PHY addresses
11260 This means that you no longer have to specific the PHY address in
11262 - Kinetis Ethernet: Add support for CONFIG_NET_NOINTS. The driver no
11264 work to the high-priority work queue.
11268 - Teensy-3.x: Add USB support and a usbnsh configuration.
11269 From kfazz (2016-06).
11270 - Freedom-K64F: Add support for the NXP Freedom-K64F board at 120MHz.
11272 code from https://github.com/jmacintyre/nuttx-k64f which was, itself,
11276 - Freedom-K64F: Added a configuration that supports networking.
11280 - STM32 F1-4: Added support for the STM32F105R. From Konstantin
11282 - STM32 F4: Added support for the STM32FF76xxx and STM32FF7xx
11284 - STM32 F1-4: Add support for Tickless mode (two timer
11286 - STM32 L4: Add support for tickless OS, and incidentally timers,
11287 PWM, oneshot, free-running.... From ziggurat29.
11291 - STM32 F1-4: Add the up_getc() function to STM32 in order to support
11293 - STM32 F7: Add SPI driver. From David Sidrane.
11294 - STM32 F7: Add SPI, I2C, and ADC drivers. From Lok Tep.
11295 - STM32 L4: Add ioctls to set/get CAN bit timing in stm32l4. Add
11298 - STM32 L4: Add some CAN mode IOCTL calls. These will be useful for
11302 - STM32 F1-4: Port STM32L4 CAN IOCTLs to STM32. From Sebastien Lorquet.
11303 - STM32 L4: Implementation of loopback IOCTLs. From Sebastien
11305 - STM32 F7: Added SDMMC1 support for stm32F7 74-75. From Lok Tep.
11306 - STM32 F7: Add USB support. From Lok Tep.
11307 - STM32 F7: Added PWR, RTC, and BBSRAM support for stm32f7. From David
11309 - STM32 F7: Added STMF7xxx RTC. From David Sidrane.
11310 - STM32 F7: Added STM32F7 DBGMCU. From David Sidrane.
11311 - STM32 L4: Port support for both RX FIFOs from STM32 CAN. From Paul
11316 - Added a minnsh configuration for the STM32F103-Minimum board. From
11318 - Added support for the Nucleo-F767ZI board. From David Sidrane.
11319 - Nucleo-144/Nucleo-F767ZI: Add test for STM32 F7 SPI. From David
11321 - Nucleo-144: Added SDMMC support to Nucleo-144. From David Sidrane.
11322 - Olimex STM32-E4077: Add support for Olimex STM32 E407 board. From
11324 - Nucleo-144: Added USB OTG device to Nucleo-144. From David Sidrane.
11325 - Nucleo-144: Added bbsram test to Nucleo-144. From David Sidrane.
11326 - STM32F4 Discovery: Add CAN support for STM32F4 Discovery. From
11328 - STM32F4 Discovery: added a canard configuration files. From
11330 - STM32F4 Discovery: Add FPU support for ostest for the STM32F4
11332 - STM32L476 Discovery: Update stm32l476 disco to include init code for
11333 smartfs and nxffs for cases where those fs are included in build.
11338 - include/assert.h: Check if NDEBUG is defined. From Paul Alexander
11340 - assert.h: Define static assert for C++ usage. From Paul Alexander
11342 - Add crc64 support. From Paul Alexander Patience.
11343 - hex2bin: Move the portable library portion of apps/system/hex2bin
11345 boot-loader builds.
11346 - Add raise().
11347 - libm: This change should significantly improve the performance of
11353 - printf(): If there are no streams, let printf() fall back to use
11354 syslog() for output.
11355 - Move pipe() and mkpipe() to nuttx/libc, they are no
11357 to support, configurable, smaller buffers for PTYs.
11358 - Move driver-related files from include/nuttx to include/nuttx/drivers.
11361 - include /nuttx/lib: Move library-related files from include/nuttx to
11366 - Custom Board Configuration: Add logic to support custom board
11371 - Remove the includes/apps link to apps/include. It is no longer
11376 - tools/tesbuild.sh will now build NxWM configurations.
11380 - Change to the way that apps/ Kconfig files are generated in
11384 directory.mk for recursive dir makefiles, Individual app kconfig
11385 fixes, Recursive Kconfig autogeneration, Add kconfig files for
11387 - apps/include directory structure reorganized. There are no longer
11388 any header files in the apps/include/. directory. Rather, sub-
11389 directories were added to match the partitioning of apps/ sub-
11391 sub-directory. This change is intended to help with some changes
11393 - Call all includes from <apps/bla/bla.h> to "bla/bla.h". From Sebastien
11395 - Add apps/include to include path in top-level Make.defs file.
11399 - Make NSH net-initialization be a configuration option. From Marten
11401 - Add NTP client initialization in NSH network startup logic. From
11403 - 'ps' command now prints out the stack usage if stack coloration is
11405 - Allow stack usage to be disabled on constrained systems. From David
11410 - NTP Client: Add retries. From David S. Alessio.
11411 - NTP Client: The NTP client will now optionally use pool.ntp.org as
11412 the NTP server; and reset the retry count upon success -- more robust.
11414 - ESP8266: Add logic to set the BAUD rate. From Pierre-noel Bouteville.
11415 - ESP8266: In Kconfig, select ARCH_HAVE_NET when NETUTILS_ESP8266 is
11416 selected. This allows, among other things, support for network debug
11417 output. From Pierre-noel Bouteville.
11421 - flash_eraseall: IOCTL wrapper for MDCIO_BULKERASE command. Was in
11427 - canlib: Basic CAN utility library. From Sebastien Lorquet.
11431 - flash_eraseall: Now uses the IOCTL wrapper at apps/fsutils/flash_eraseall.
11435 - Add platform files for Olimex STM32 E407. From Mateusz Szafoni.
11439 - apps/examples/canard: Add canard example application. From
11441 - apps/examples/pty_test: PTY test program. From Alan Carvalho de
11444 Works-In-Progress:
11446 * IEEE802.14.5/6LowPAN. Hooks and framework for this effort were
11447 introduced in NuttX-7.15. Work has continued on this effort on
11450 least NuttX-7.18.
11456 ChangeLog for the complete list of bugfixes and for additional, more
11461 - semaphores: Need to set errno to EINVAL on errors in sem_post()
11466 - Several MTD FLASH drivers nullify the freed 'priv' structure and
11469 - VFS ioctl(). Per comments from David Sidrane, file_ioctl() should
11472 - SST26 Driver: Before accessing the sst26 flash, the "Global Unlock"
11473 command must me executed, which I do in the sst26 driver. BUT re-
11475 the execution of this command. This was not done. I have no idea how
11477 happen at all, the flash is half-enabled! From Sebastien Lorquet.
11478 - N25Qxx Driver: Alter the notion of 'blocksize' to be equivalent to
11484 - SmartFS: Fix a 32-byte memory leak. From Ken Pettit.
11485 - SMART MTD layer: Fixes freesector logic error when sectorsPerBlk=256,
11486 adds DEBUGASSERT for invalid geometry and additional memory debug
11492 - USB CDC/ACM Device Class: cdcacm_unbind leaks write request objects.
11498 bulk IN endpoint until after to loop (much as was the case for the
11501 - Pipes and FIFOs: Add missing configuration for pipe ring buffer
11503 - UART 16550: Handle when CONFIG_SERIAL_UART_ARCH_IOCTL is not
11505 - Common Serial Upper Half: Fix a race condition noted by Stefan
11511 If that happens that uart_putxmitchar() can hang waiting for data
11513 - USB MSC Device Class: Add locks when removing request from queue.
11515 - USB MSC Device Class: Fix reversed logic on waiting for SCSI thread
11516 start. The scsi thread was waiting for the wrong condition.
11524 - Correct conditional compilation in ST7565 LCD driver. From Pierre-
11529 - In both IPv6 and IPv4 incoming logic: (1) Should check if the
11535 - TCP Networking: While working with version 7.10 I discovered a
11540 The scenario is as follows: NuttX did not receive ACK for some sent
11548 to conn->isn + conn->sent, which is truth only if no further
11554 * ARMv7-M:
11556 - ARM stack check: Fix double fault on IDLE task with stack size = 0.
11561 - CAN: CAN Message Filtering fixed: (1) stdfilters didn't work because
11574 - Fix some errors in AFEC header file. From OrbitalFox.
11575 - DAC: DACC_WPMR_WPKEY_MASK -> DACC_WPMR_WPKEY. From Wolfgang
11577 - Timer: Fix ops check in TCIOC_STOP. From Wolfgang Reissnegge.
11578 - I2C: Fix reversed logic in twi_startmessage(). From Wolfgang
11580 - SAM3/4 UDP: Fix handling of endpoint RX FIFO banks. This fixes
11586 - USBHS Device: This change solves a problem which causes data loss
11592 USBHS_EPSTATE_SENDING_DMA for the fix. To reproduce the problem, I
11598 - Timers: Support up to 8 channels per timer. From kfazz.
11602 - Teensy 3.x clock fixes: The High Gain bit in MCG_C1 was preventing
11605 restrictions in the k20 family reference manual on FEI -> FBE clock
11610 - LPC17 Ethernet: Needs to correctly ignore PHYID2 revision number
11615 - Fix errors in GPIO interrupt logic. From v01d (phreakuencies)
11616 - Ethernet: Correct auto-negotiation mode in the LPC43xx Ethernet.
11618 - Writing zero to NVIC_IRQ_ENABLE has no effect. Disable interrupts
11620 - SPIFI: If CONFIG_SPIFI_SECTOR512 undefined, lpc43_bwrite doesn't do
11622 current state of lpc43_spifi implementation, but for me NXFFS works
11625 * Qemu-i486:
11627 - Fix qemu-i486/ostest/Make.defs test for M32. From Heath Petersen.
11631 - Fix EFM32 FLASH conditional compilation. From Pierre-noel
11633 - Writing zero to NVIC_IRQ_ENABLE has no effect. Disable interrupts
11638 - STM32 F1-F4: In PWM driver, just update duty if frequency is not
11640 only duty is frequently changed. From Pierre-noel Bouteville.
11644 - STM32 F7: Fixed STM32F7 DMA stm32_dmacapable. DMA working on SDMMC.
11646 - STM32 F1-F4 Timer Driver: Change calculation of per- timer pre-scaler
11647 value. Add support for all timers
11648 - STM32 F1-F4: Correct conditional compilation in STM32 timer capture
11649 logic. From Pierre-noel Bouteville
11650 - STM32 F1-F4: Fix STM32 DMA code and configuration for STM32F37X chips.
11652 - STM32 F1-F4: Fix compilation errors in debug mode of stm32_pwm.c.
11654 - STM32 F1-F4: Correct the CAN2 RX IRQ number for stm32f10xx chips.
11656 - STM32 F1-F4: Move backup domain reset to earlier in the
11659 - STM32 F1-F4: When configuring a GPIO via stm32_configgpio() the
11662 externaly pulled-up pin, this would lead to a glitch on the line
11663 that may be dangerous in some applications (e.G. Reset Line for
11666 - STM32 F7: Apply Pascal Speck's GPIO STM32 change to STM32 L4.
11667 - STM32 L4: Apply Pascal Speck's GPIO STM32 change to STM32 L4.
11669 - STM32 F7: BUGFIX: PLLs IS2 and SAI P Calculation. From David
11671 - STM32 L4: STM32 CAN fixes need to be backported to STM32L4 as well.
11672 - STM32 F1-F4 and L4: Writing zero to NVIC_IRQ_ENABLE has no effect.
11675 - STM32 F7: STMF7xxx RTC: (1) Remove proxy #defines, (2) Ensure the
11685 - STM32 F1-F4: STM32 BBSRAM fixed (and formatted) flags. From David
11687 - STM32 F7: STM32F7 BBSRAM fixed (and formatted) flags. From David
11689 - STM32 L4: Fix incorrect clock setup for LPTIM1. From ziggurat29.
11690 - STM32 F4/L4 RTC ALARM: were enabling interrupts too early in the
11691 power-up sequence, BEFORE the interrupt system was being
11696 - STM32 board.h: Fix STM32 timer input clock definitions. From David
11701 - Bug Fix in tiva_serial.c - UART5, UART6 and UART7 were not being
11702 configured as TTYS0 for printing over serial console. From Shirshak
11707 - include/signal.h: Change type of SIG_ERR, SIG_IGN, ... to
11710 - crc16: fix error. From Paul Alexander Patience.
11711 - strtoul() and strtoull(): Fix errno settings required by function
11716 - Build system: This change fixes a build problem that only occurs
11717 when reconfiguring from Linux to Windows or vice-versa. It is a
11728 native toolchain cannot follow the Cygwin- style symbolic links.
11734 - Need to build the drivers/ directory even it file descriptors are
11737 - Remove all inclusion of header files from the apps/include
11738 directory from NuttX core logic. There should be no dependency on
11745 - Make sure that APPNAME is defined in all Makefiles that generate
11750 - apps/builtins: exec_builtin was not using the provided open flags.
11756 - apps/nshilib: PS Command: When Priority Inheritance is enabled, the
11763 - apps/netutils, uIP webserver: Fix a data declaration in a header
11768 - apps/canutils/libuavcan: Fix for recent change to STM32 timer
11773 - apps/examples/alarm: ioctl call was clobbering file descriptor.
11774 - apps/examples/can: Some variables were not declared in all required
11776 - apps/examples/media: media example was intended to take either a
11777 command line argument, or a compiled-in default value from config.
11781 NuttX-7.18 Release Notes
11782 ------------------------
11785 and is available for download from the Bitbucket.org website. Note
11786 that release consists of two tarballs: nuttx-7.18.tar.gz and
11787 apps-7.18.tar.gz. These are available from:
11792 Both may be needed (see the top-level nuttx/README.txt file for build
11799 - Add standard adjtime() interface and basic timekeeping support.
11802 - Use the oneshot timer with optional entropy to measure CPU load if
11807 - Add Fujistu MB85RS256B ramtron support. From Beat Küng.
11808 - SPI-based MTD driver for Macronix MX25L3233F or MX25L6433F. From
11813 - SH1106 0.96 OLED module support (SSD1306 compatible) + I2C fixes.
11818 - Add KXTJ9 Accelerometer driver from the Motorola Moto Z MDK.
11819 - Add MFRC522 RFID ISO14443 and Mifare transceiver driver. From Alan
11821 - Add driver for the LIS3MDL 3 axis magnetometer. From Alexander
11823 - Add driver for the MLX90393 3 axis magnetometer. From Alexander
11825 - Add driver for the LIS3DSH 3 axis accelerometer. From Alexander
11827 - Add driver for the Bosch BMG160 3 axis gyroscope. From Alexander
11829 - Add support for the Sensixs XEN1210 3D-board. This sensor is used
11830 on NANOSATC-BR2 a Brazilian CUBESAT project. From Alan Carvalho
11832 - Add a new ioctl command (set MAXPOS) for Tiva QEI. From Young.
11836 - I/O Expander: Remove hard-coded PCA9555 fields from ioexpander.h
11837 definitions. Add support for an attach() method that may be used
11839 - I/O Expander Interface: Encode and extend I/O expander options to
11841 - PCA9555 Driver: Replace the signalling logic with a simple callback
11844 the lower-lower part of any driver that uses GPIOs (include the GPIO
11851 - Add a skeleton I/O Expander driver (based on the PCA9555 driver).
11852 - Add PCF8574 I/O Expander driver.
11853 - GPIO driver: Add IOCTLs to get the pin type and to unregister a
11855 - Add a GPIO lower-half driver that can be used to register a GPIO
11856 character driver for accessing pins on an I/O expander.
11857 - Add an SPI helper function that encapsulates and manages a sequence
11859 - Add an SPI character driver that will permit access to the SPI bus
11860 for testing purposes.
11861 - Add oneshot timer lower half interface definition.
11862 - Add an upper-half, oneshot timer character driver.
11863 - Add Audio Tone Generator for NuttX. From Alan Carvalho de Assis.
11864 - Add USB host support for composite devices. This feature is not
11866 - drivers/ioexpander: Add an (untested) TCA64XX I/O Expander driver
11871 - Add a simulated I/O Expander driver.
11872 - Add simulator-based test support for apps/examples/gpio.
11873 - Add a configuration useful for testing Mini Basic.
11874 - Add a simulated oneshot lowerhalf driver.
11878 - SAM4CM: Add option to support oneshot timer without free-running
11883 - SAMA5D: Add option to support oneshot timer without free-running
11888 - SAMV71/SAME70: Add option to support oneshot timer without
11889 free-running timer. Add oneshot lower half driver.
11890 - Add support for SAMV7 DACC module. From Piotr Mienkowski.
11894 - Add support for I2C and RTC. From v01d (phreakuencies).
11898 - Add teensy 3.x I2C support. From v01d (phreakuencies).
11902 - Add IAR-style STM32F1xx vectors. Tested on STM32F103RB and
11907 - Add timekeeping support for the STM32 tickless mode. From Max
11909 - Add a oneshot, lower-half driver for STM32.
11910 - STM32 L4: Add oneshot lower half driver for STM32 L4.
11911 - STM32 L4: Add support for quadrature encoders on STM32L4. Sebastien
11916 - stm32f103-minimum: Add board support to MFRC522 driver. From Alan
11918 - Add oneshot board initialization to stm32f103-minimum. From Alan
11920 - stm32f103-minimum: Add board configuration to initialize Audio Tone
11922 - stm32bufferfly2: Add support for the Kamami stm32butterfly2
11924 - stm32f103-minimum: Add board config support to SPI LCD module
11925 JLX12864G-086. From Alan Carvalho de Assis.
11926 - stm32l476-mdk: Support basic booting and nsh on Motorola MDK. The
11929 - STM32 F4 Discovery: Add support for XEN1210 3D-board. From Alan
11931 - stm32f103-minimum: Add stm32_bringup support and userled example to
11933 - Add support for qencoders on various nucleo boards. From Sebastien
11935 - olimex-stm32-e407: Add some networking configurations. From Mateusz
11940 - Add tiva PWM lower-half driver implementation. From Young.
11941 - Tiva QEI: Add QEI lower-half driver for Tiva series chip. From
11946 - Separate XorShift128 PRNG from /dev/urandom and make it generally
11948 - Add POSIX type sig_atomic_t. From Sebastien Lorquet.
11949 - Add the difftime() function. The function depends on the toolchain-
11952 - Add support for remove(). From Sebastien Lorquet.
11953 - Add system() to stdlib.h. Actual implementation is in
11958 - Rename arch/sh to arch/renesas.
11959 - Remove contactless drivers from drivers/wireless to drivers
11961 - Move all modem-related IOCTL commands to a common file to assure
11966 - Add sethost.sh. This is a script that you can use to quickly
11972 - Add logic to support an NSH-specific system command.
11973 - Add printf command to NSH, e.g., controlling /dev/userleds from
11979 - Port tee command from NetBSD.
11980 - Add a generic system command. Current implementation cannot use
11985 - Add C++ support for STM32L476-MDK.
11989 - Add a port of Mini Basic, version 1.0, written by Malcom McLean and
11994 - Add a simple test of the GPIO driver.
11995 - Add RFID_READUID sample application. From Alan Carvalho de Assis.
11996 - Add Oneshot timer example.
11997 - Add a simple test of the system command.
11999 Works-In-Progress:
12001 * IEEE802.14.5/6LowPAN. Hooks and framework for this effort were
12002 introduced in NuttX-7.15. Work has continued on this effort on
12005 least NuttX-7.19.
12008 ChangeLog for the complete list of bugfixes and for additional, more
12013 - Explicitly initialize the group tg_exitsem with sem_init(). The
12016 - The TCB nchildren field should not be incremented when pthreads are
12018 - Move fields related to parent/child task relationship out of TCB
12021 - mq_send() was not setting the errno value on certain failures to
12023 - Define 'group' even if HAVE_GROUPID is not set. From Mateusz
12025 - Vector table should have dimension NR_IRQS, not NR_IRQS+1. From
12027 - pthreads: When a pthread is started, there is a small bit
12042 - FAT performance improvement. In large files, seeking to a
12046 short-circuits fat_seek() in all cases where we attempt to seek to
12048 - MTD: Fixed cloned typos in several FLASH drivers. From Aleksandr
12050 - mount: Corrects a bad assertion noted by Pierre-noel Bouteville.
12058 - Various serial drivers: Fix FIONWRITE and add FIONSPACE. All
12063 - Add missing prototype for btn_lower_initialize().
12064 - Make DAC sample structure packed. From Marc Rechté.
12068 - TCP: tcp_ipvX_bind() not actually using the port selected with
12071 - drivers/net: NET_TUN=y => NET_MULTIBUFFER=y. From Vladimir
12073 - slip driver: Fix calculations using MSEC_PER_TICK. If
12079 - SAM3/4 GPIO: Enable peripheral clock for GPIO port when GPIO is
12081 the peripheral clock for the port controller the GPIO resides in is
12084 - All SAM Ethernet Drivers: Add support so that the drivers can be
12086 - SAM3/4: Fix GPIO pull-up/down code. Enabling the pull-down resistor
12087 while the pull-up resistor is still enabled is not possible. In this
12088 case, the write of PIO_PPDER for the relevant I/O line is discarded.
12089 Likewise, enabling the pull-up resistor while the pull-down resistor
12091 PIO_PUER for the relevant I/O line is discarded. From Wolfgang
12096 - All SAM Ethernet Drivers: Add support so that the drivers can be
12098 - SAM GPIO: Apply Wolfgang's change for SAM3/4 to SAMA5 and SAMV7.
12102 - Add missing oneshot max_delay method.
12103 - All SAM Ethernet Drivers: Add support so that the drivers can be
12105 - SAM GPIO: Apply Wolfgang's change for SAM3/4 to SAMA5 and SAMV7.
12109 - LPC43xx serial: Fix typos in LPC43 serial driver. Found by Vytautas
12111 - LPC43xx Serial: There are some small problems in LPC43xx RS485 mode
12115 enable pin output for UART0,2,3. (3) should be option to reverse DIR
12123 - EFM32 SPI drivers adopted incompatible conventions (See STM32 for
12128 - STM32, STM32 L4, and EFM32 SPI drivers adopted incompatible
12130 to negative when calling SPI_SETBITS which had the magical side-
12132 only a hokey way to pass control information but is supported by no
12141 - Add missing SPI2 and SPI3 support for STM32F3F3. Add STM32F37XX DMA
12142 channel configuration. For STM32F37XX, SYSCFG_EXTICR_PORTE defined
12144 - STM32: Make stm32_pwr_enablebkp thread safe. From Max Neklyudov.
12145 - Fix bad pllmul values for STM32F1XX connectivity line. STM32F1XX
12148 - STM32F3 SPI: Fix the number of bit setting for the F3. That and
12149 data packing work differently on the STM32F3 than for other STM32
12151 - STM32 and STM32 L4: Enabling SPI DMA loses other bits in CR2.
12152 - STM32F3 SPI: Cannot write always 16-bit value to DR register
12154 - STM32F411 and STM32F446 map i2c2_sda_4 to different alternate
12156 - STM32 DMA Fix: Change stm32 adc dma callback to send channel
12158 - STM32 OTGFS device: Fix for lost first word from FIFO
12174 - STM32 L4 OTGFS device: Apply stm32 fix to stm32l4. From Sebastien
12176 - STM32 F7: Remove duplicate call to pkt_input from Ethernet driver.
12178 - STM32 L4: Add support for USART3-USART5. For STM32L4 parts, the
12182 - STM32 USB: Set USB address to avoid a failed assertion. From
12183 Pierre-noel Bouteville.
12184 - STM32 L4 and L7 USB: Pierre's assertion-avoidance change should
12186 - STM32, L4, and F7: Remove GPIO_ETH_RMII_TX_CLK. TX_CLK is not
12188 - STM32 Ethernet: Correct typo in conditional logic. From Neil
12190 - STM32 L4 USB Device: Fixed L4 USB Driver by avoiding SETUPDONE and
12192 - STM32 SPI: stm32_modifycr2 should be available on all platforms if
12194 - STM32 DMA2D: fix an error in up_dma2dcreatelayer where an invalid
12200 - Fix two bugs of tiva pwm lower-half driver implementation. From
12202 - Tiva Ethernet: Needs support for CONFIG_NET_MULTIBUFFER=y.
12206 - lib_dumpbuffer() now prints a large on-stack buffer first to avoid
12208 Pierre-noel Bouteville.
12209 - libc/math: This fixes the following libc/math issues: (1) asin[f l]()
12211 converges very slowly (> 500,000 iterations) for values of x close to
12213 forever). The attached patch uses an trig identity for values of
12214 x > sqrt(2). The resultant functions converge in no more than 5
12215 iterations, 6 for asinl(). (2) The NuttX erf[f l]() functions are
12218 x near -3.0. This patch fixes that problem. It should be noted that
12220 less than 1.2E-07 and that's fine for the float version erff(), but
12221 the same method is used for double and long double version which
12223 address the issue of lower precision for erf() and erfl(). (3) a
12224 faster version of copysignf() for floats is included. From David S.
12226 - strtod() was not returning endptr on error conditions.
12227 - libc/math: floor(), floorf(), and floorl(): Fix logic error. Was
12229 - isatty() should be prototyped in unstid.h, not termios.h. From
12231 - nxglib: Fix handling of near-horizontal lines of width 1 in
12232 nxgl_splitline(). Missing handling for degenerate condition caused
12233 width 1 lines such as (0, 0) - (100, 10) to have gaps in the
12238 - Top-Level Makefiles: Fix a chicken-and-egg problem. In the menuconfig
12239 target, the context dependency was executed before kconfig-mconf. That
12242 Kconfig files would not be included. But this introduces the chicken-
12243 and-egg problem in some configurations. In particular: (1) An NX
12244 graphics configuration is used that requires auto-generation of
12245 source files using cpp, (2) the configuration is set for Linux, but
12247 In this case, POSIX-style symbolic links are set up but the Windows
12250 fails. During the context phase, NX runs CPP to generate source files
12253 menuconfig (and related) targets. They no longer depend on context
12256 to run all of the context setup; the compiler is never invoked; no
12258 - CXXFLAGS: Add -fcheck-new whenever -fno-exceptions is used. From
12263 - tools/refresh.sh: Recent complexities added to apps/ means that
12266 - tools/kconfig2html.c: Update to handle absolute paths when sourcing
12268 - tools/mkfsdata.pl was still generating the old-style apps/include
12273 - Add DIRLINK and DIRUNLINK tool definitions to apps/Make.defs.
12277 - Fix FIFO_SIZE vs PIPE_SIZE.
12278 - Fix hex representation of IP address in Kconfig. Noted by Michal
12280 - nsh_syscmds.c: missing semicolon. From Mateusz Szafoni.
12281 - In system command, don't try to flush output streams if stdio
12286 - libuavcan: Under certain circumstances, DELIM is not be defined in
12288 - Add definition for APPNAME in apps/canutils/canlib. From Sebastien
12293 - Fix an error minmea. From Aleksandr Vyhovanec.
12297 - apps/examples/oneshot: If the requested delay is > max_delay, then
12300 NuttX-7.19 Release Notes
12301 ------------------------
12304 and is available for download from the Bitbucket.org website. Note
12305 that release consists of two tarballs: nuttx-7.19.tar.gz and
12306 apps-7.19.tar.gz. These are available from:
12311 Both may be needed (see the top-level nuttx/README.txt file for build
12318 - sched/semaphore, sched/phread/, libc/semaphore, libc/pthread: Add
12319 pthread_mutexattr_get/set_protocol and non-standard
12322 - Spinlocks: Added capability to provide architecture-specific memory
12324 - SMP: Add spin_trylock(). Use this in conditions where other CPUs need
12326 - sched note: Extend OS instrumentation to include some SMP events.
12329 - sched note: Permit spinlock and critical section notes in in-memory
12331 - sched note: Add additional note to see if/when CPU is started in SMP
12333 - sched note: Record ID enumeration now results on constant values; ID
12334 … values do not change with configuration. This makes writing post-processing software much easier.
12335 - boardctl: Add new boardctl() command, BOARDIOC_NX_START, to start the
12337 - pthreads: Add pthread_cleanup_push() and pthread_cleanup_pop().
12338 - pthreads: Added pthread_setcanceltype() and pthread_testcancel().
12339 - pthreads: Add support for cancellation points.
12340 - task_delete() now obeys all cancellation point semantics.
12341 - Add task_setcancelstate(), task_setcanceltype(), and
12342 task_testcancel(). These are non-standard interfaces analogous to the
12344 for tasks.
12348 - boardctl: Add new boardctl() command, BOARDIOC_NX_START, to start the
12353 - Network drivers: Add option to use low-priority work queue to all
12355 - Network Drivers: Adapt all Ethernet (and other MAC) drivers to work
12358 - Eliminate CONFIG_NO_NOINTS. There is no longer any support for
12363 - Vishay VEML6070: Add Vishay VEML6070 driver. From Alan Carvalho de
12366 * ARMv7-A
12368 - ARMv7-A/i.MX6: Add SCU register definitions. Add some controls to
12369 enable SMP cache coherency in SMP mode. Makes no difference, however
12370 -- cache still incoherent on i.MX6.
12371 - ARMv7 GIC: SGIs are non-maskable but go through the same path as
12377 - SAM3/4: Add SMP support for the dual-core SAM4CM. From Masayuki
12382 - Add support for the SAM5CMP-DB board. From Masayuki Ishikawa.
12386 - SAM4CMP-DB: Add support for the Atmel SAM4CMP-DB board running in an
12388 - SAM4CMP-DB: Add hooks to auto-mount the procfs file system on startup
12389 in board bring-up logic.
12393 - SAMv7: Register the watchdog device at the configured device path
12394 CONFIG_WATCHDOG_DEVPATH vs. hard-coded /dev/wdt. From Frank Benkert.
12398 - Calyps: Remove all Calypso board configurations. Remove Calypso
12399 architecture support and support for Calypso SERCOMM driver.
12403 - Misoc LM32: Adds basic support for the Misoc procoessors and the LM32
12405 - Misoc LM32: Add signal handling logic. From Ramtin Amin.
12406 - Misoc LM32: Add logic to flush/invalidate caches. From Ramtin Amin.
12410 - Misoc LM32 Serial: Add interrupting Misoc serial driver. From Ramtin
12412 - Misoc LM32 Timer: Add timer driver. From Ramtin Amin.
12413 - Misoc LM32: Add Misoc Ethernet driver From Ramtin Amin.
12417 - Misoc LM32 Qemu: Board support for testing Misoc LM32 with Qemu. From
12419 - Misoc LM32 Qemu: Integrate network support into configs/misoc/hello.
12421 - Misoc LM32 Qemu: Remove configs/misoc/include/generated directory. I
12426 useful for performing test builds. You really must generate the Misoc
12427 architecture for a real-life build. From Ramtin Amin.
12431 - i.MX6: Add an untested SPI driver taken directly from the i.MX1 port.
12435 - Kinetis: Added missing headers. Kinetis broke out SPI to
12437 inclusion - still STUBS. Add Kinetis support for ARMV7-M Common
12440 swapped for value in kinetis_i2c_putreg. From David Sidrane.
12444 - Kinetis: Add UID Unique ID. From Neil Hancock.
12448 - Freedom-K64F board: Add support for UID Unique ID. From Neil Hancock.
12452 - Olimex-LPC1766-STK: Enable procfs in NSH configuration. Automount
12457 - LPC43xx: Add timer driver: From Alan Carvalho de Assis.
12458 - LPC43xx GPDMA driver: The GPDMA block is basically the same as the
12465 - Bambino 200E: Add basic support to Micromint Bambino 200E board.
12468 - Bambino 200E: Add support for timer driver. From Alan Carvalho de
12473 - Remove RGMP and RGMP drivers.
12475 * RISC-V:
12477 - RISC-V: Add support for the RISC-V architecture and
12478 configs/nr5m100-nexys4 board. The board support on this is pretty
12479 thin, but it seems like maybe a good idea to get the base RISC-V stuff
12484 - STM32 F3: Implementation of the STM32 F37xx SDADC module. There are
12488 - STM32 F3: Add PWM driver support for STMF37xx. The changes have been
12489 tested successfully for TIM4 and TIM17 (different IPs). From Marc
12491 - STM32 F4: Support oversampling by 8 for the STM32 F4. From David
12493 - STM32 F4: Added Timers 2-5 and control of SAI and I2S PLLs. Added
12494 support for stmf469 SAI and I2S PLL configuration and STM446 fixes.
12496 - STM32 F4: Expanded OTGFS support to stm32F469 and stm32f446. Added
12499 - STM32 F4: Allow dma in 1 bit mode in STM32F4xxx. From David Sidrane.
12500 - STM32 F7: Allow the config to override the clock edge setting. From
12502 - STM32 L4: Support Complementary PWM outputs on STM32L4. From
12504 - STM32 L4: Add implementation of dumpgpio for stm32l4, was required
12505 for pwm debug. From Sebastien Lorquet.
12509 - STM32F103 Minimum: Add button support. From Alan Carvalho de Assis.
12510 - STM32F103 Minimum: Add support to PWM on STM32F103-Minimum board.
12512 - STM32F103 Minimum: Add RGB LED support on STM32F103 Minimum board.
12514 - STM32F103 Minimum: Add Vishay VEML6070 driver support to the
12515 STM32F103-Minimum board. From Alan Carvalho de Assis.
12516 - Nucleo-F303RE: Add STM32 F303RE hello configuration. From Marc
12518 - Nucleo-L476: Support PWM testing on board Nucleo L476. From
12520 - Nucleo L476: Add support for timers to Nucleo L476. From Sebastien
12522 - Hymini STM32v: Enable CONFIG_RTC in the hymini-stm32v/nsh2
12523 (kitchensink) config. From Maciej Wójcik.
12524 - Olimex STM32-p407: Add support for the Olimex STM32 P407 board.
12528 - Tiva PWM: Support PWM_PULSECOUNT feature for TI tiva. From Young.Mu.
12532 - Xtensa ESP32: Basic architectural support for Xtensa processors and
12534 - Xtensa ESP32: Add EXPERIMENTAL hooks to support lazy Xtensa
12535 co-processor state restore in the future.
12536 - Xtensa ESP32: Basic port is function in both single CPU and dual CPU
12537 SMP configurations. There is an NSH configuration for each CPU
12541 - Xtensa ESP32: Add stack checking logic.
12545 - ESP32 Core v2: Basic support for Espressif ESP32 Core v2 board
12548 - ESP32 Core v2: Add configuration to support linking NuttX for
12550 - ESP32 Core v2: Automatically mount /proc at start-up.
12551 - ESP32 Core v2: Add an OS test to verify the port.
12555 - libc/locale: Add a dummy setlocale() function to avoid drawing the
12557 - include/locale.h: Modify locale.h to add localeconv() and lconv
12559 - libc/locale: Allows c++ code to compile with or without
12563 supported and return "C" for POSIX. C and "". From David Sidrane.
12564 - libc/wchar: Add wcslen, wmemchr, wmemcmp, wmemcpy wmemset, btowc,
12567 - libc/wctype: Add functions wcrtomb, wcslcpy, wcsxfrm, wctob, wctomb,
12571 - include/ctype.h : Add isblank() macro to ctype.h. From Alan Carvalho
12573 - lic/stdlib: Add strtof() and strtold() as simply a copy of strtod
12575 - sscanf(): Use strtof() instead of strtod() if a short floating point
12577 32-bit FPU support with some additional code size.
12578 - sscanf(): Add scansets to the scanf function. Enabled
12580 - include/inttypes.h: Add architecture-specific inttypes.h. From Paul
12582 - C Library: Allow option to enable IP address conversions even when
12587 - The Smoothie project needs to compile C++ inside config/boardname/src/
12589 configs Makefile to support it. It works fine for the first time
12590 compilation, but if we execute "touch config/boardname/src/Pin.cxx"
12597 - tools/: Add tools/showsize.sh.
12601 - NSH: dd command will show statistics. From Masayuki Ishikawa.
12605 - apps/system/sched_note: Extend to include additions to instumentation
12606 for SMP.
12607 - apps/system/sched_note: Add support for spinlock notes.
12608 - apps/system/sched_note: Add support for new scheduler instrumentation.
12612 - ESP32 Core v2: Add platform support for the ESP32 core v2 board.
12613 - Olimex STM32-p407: Add platform support for the Olimex STM32 P407.
12617 - graphics/traveler/tcledit and libwld: Add an X11 Tcl/Tk tool that can
12619 - Graphics: Remove all NX server taks. Instead, call boardctl() to the
12624 - examples/buttons: Add a new buttons example that uses the button
12627 - examples/cctype: Add an example to verify cctype functions.
12628 - Remove RGMP example.
12629 - examples/ostest: Extend the pthread cancellation test to exercise
12632 - examples/ostest: enhance pthread cancellation test some.
12634 Works-In-Progress:
12636 * IEEE802.14.5/6LowPAN. Hooks and framework for this effort were
12637 introduced in NuttX-7.15. Work has continued on this effort on
12640 least NuttX-7.20.
12643 ChangeLog for the complete list of bugfixes and for additional, more
12648 - sched/semaphore: Within the OS, when a thread obtains a semaphore
12651 sem_addholder(), otherwise it waited for the semaphore and called
12658 restarting the thread waiting for the semaphore count. This problem
12660 - Many files: Make sure that priority inheritance is not enabled for
12663 - sched/semaphore: sem_trywait() no longer modifies the errno value
12666 - sched/clock: Correct clock initialization. The correct range for the
12667 month is 0-11 but is entered as 1-12 in the .config file. Add ranges
12669 - sched/clock: Correct calculation for the case of Tickless mode with a
12670 32-bit timer. In that case, the calculation was returning millisecond
12673 - Work Queue: When queuing new LP work, don't signal any threads if
12675 - Work Queue: Signal sent from work_signal() may interrupt the low
12676 priority worker thread that is already running. For example, the
12677 worker thread that is waiting for a semaphore could be woken up by the
12681 - Fix DEBUGASSERT() in group_signal.c. From Masayuki Ishikawa.
12682 - Eliminate bad boardctl() commands: Remove all references to
12687 - pthreads: Fix an error in pthread_mutex_destroy(). An error could
12690 - task_restart: Make sure new task starts with pre-emption disabled and
12692 - Enter/leave Critical Sections. Major redeign to
12697 - SMP Critical Sections: Fixes for the SMP case: (1) Change order for
12701 - SMP wdogs: Wdog timers use a tasking interface that to manipulate
12705 are disabled and no conflicts can occur. But that may not be the case
12709 locking (via enter_critical section) to wdog expiration logic for the
12711 - SMP vfork(): Fix a race condition in the SMP case. Existing logic
12716 - SMP: This change adds a new internal interfaces and fixes a problem
12730 - SMP: Add logic to avoid a deadlock condition when CPU1 is hung waiting
12731 for g_cpu_irqlock with interrupts interrupts and CPU0 is waiting for
12733 - SMP: Enforce this rule: Tasks which are normally restored when
12736 still have pre-emption disabled, i.e., g_cpu_schedlock is locked. In
12742 - AT24XX EEPROM MTD driver: Added EEPROM timeout. Fromo Aleksandr
12744 - fs/procfs: Fix procfs status for SMP case.
12748 - Fonts: Correct some default font IDs. From Pierre-Noel Bouteville.
12752 - usbhost/enumerate: Fix possible buffer overwrite. From Janne Rosberg.
12753 - usbhost/composite: Fix compile; missing semicolons. From Jann Rosberg.
12754 - syslog: Fixes required for file syslog output. From Max Kriegleder.
12755 - SPI configuration: Fix Kconfig warning. This change moves the
12756 ARCH_HAVE_SPI options outside the check for SPI. Those options don't
12759 if support for the driver is enabled prevents us from defining these
12763 - drivers/timer: Remove the timer driver TIOC_SETHANDLER IOCTL call.
12765 is non-standard, non-portable, and cannot be supported. Instead, add
12768 - All timer lower half drivers. Port Sebastien's changes to all other
12770 - USB MSC Device: Fix length of mode6 sense reply packet. From
12772 - USB Composite Host: Fix end offset in usbhost_copyinterface(). From
12774 - USB CDC/ACM Host: Add CDC_SUBCLASS_ACM and CDC_PROTO_ATM to
12776 - SSD1306: Fix errors in SPI mode configuration. From Gong Darcy.
12777 - CDC/ACM Device Class: uart_ops_s portion of cdcacm will not be
12782 - drivers/net/tun.c: Fix bug in TUN interface driver. From Max Nekludov.
12784 * ARMv7-A:
12786 - ARMv7-A SMP: Add SMP logic to signal handling.
12788 * ARMv7-M:
12790 - ARMv7-M: Fix double allocation of MPU region in mmu.h.
12792 * ARMv7-R:
12794 - ARMv7-R: Fix compilation error. This change fixes compilation errors
12795 on MPU support for ARMv7-R. From Heesub Shin.
12796 - ARMv7-R: fix invalid drbar handling. In ARMv7-R, [31:5] bits of DRBAR
12798 there is no point in passing other than the base address. From Heesub
12800 - ARMv7-R: Remove the redundant update on SCTLR. mpu_control() is
12803 - ARMv7-R: Add new Kconfig entries for D/I-cache. Unlike in ARMv7-A/M,
12804 Kconfig entries for data and instruction caches are currently missing
12805 in ARMv7-R. This change adds those missing Kconfig entries. Actual
12806 implementation for those functions will be added in the subsequent
12808 - ARMv7-R: Add cache handling functions. This change adds functions for
12809 enabling and disabling d/i-caches which were missing for ARMv7-R.
12811 - ARMv7-R: Fix typo in mpu support. s/ARMV7M/ARMV7R/g. From Heesub Shin.
12812 - ARMv7-R: Fix CPSR corruption after exception handling. A sporadic
12819 invalid value at power-on-reset. As it is not initialized at boot, the
12822 - ARMv7-R: Fix to restore the Thumb flag in CPSR. Thumb flag in CPSR is
12828 - SAM3/4 UDP: Add delay between setting and clearing the endpoint RESET
12834 1. If that happens the host will time-out and reset the bus. Adding
12837 - SAM3/4: Remove unused 'halted' flag from UDP driver. From Wolfgang
12839 - SAM3/4: Remove 'stalled' flag from the UDP driver. This flag is not
12845 - SAM4S Xplained Pro: Configuration uses old, improper timer interface.
12851 - SAMv7 USBDEVHS: A problem occurred with the SAMV7 USBDEVHS driver if
12861 - SAMV7 MCAN: Prevent Interrupt-Flooding of ACKE when not connected to
12862 CAN-BUS. An Acknowledge-Error will occur every time no other CAN Node
12864 not connected to the can-bus. The CAN-Standard declares, that the Chip
12867 to resend the message an Acknowledge-Error-Interrupt is generated. At
12868 high baud rates this can lead in extremely high CPU load just for
12870 application). To prevent this Interrupt-Flooding we disable the ACKE
12873 - SAMV7 MCAN: Make delete_filter functions more robust. From Frank
12878 - SAMA5 PWM: Driver does not build when executing from SDRAM before
12886 - Misoc LM32: Corrects a bug that never occurred in qemu on simulation or
12892 - i.MX6 interrupt handling: Additional logic needed to handle nested
12894 SGI interrupts are non-maskable.
12898 - LPC43xx serial: Fix a typo in ioctl TIOCSRS485 ioctl. From Vytautas
12900 - LPC43xx serial: Restore RS485 mode on serial port open (if RS485 is
12902 - LPC43xx SD/MMC: Correct some definitions on SMMC control register in
12904 - LPC43xx SD card: Correct pin configuration options needed for SD card
12909 - EFM32: Fix a compilation error. From Pierre-noel Bouteville.
12913 - STM32 CHxN channels are always outputs. From Sebastien Lorquet.
12914 - STM32 DAC: Fix shift value whenever there are is a DAC2 and, hence,
12916 - STM32 F1: Add TIM8 to STM32F103V pinmap. From Maciej Wójcik.
12917 - STM32 F1: Fix for F1 RTC Clock, tested on F103. From Maciej Wójcik.
12918 - STM32 F3: STM32F303xB and STM32F303xC chips have 4 ADCs. From Paul
12920 - STM32 F4: A new implementation of the STM32 F4 I2C bottom half. The
12924 - STM32 F4 OTGHS Host: If STM32F446 increase number of channels to
12926 - STM32 F4: I think, that Size is (highest address+1 - Base address).
12929 - STM32 F4: Fix ADC compilation error when DMA isn't enabled. From Paul
12931 - STM32 F4: STM32F427 was rebooting. Over reached family. From David
12933 - STM32 F4: Added STM32F469 RAM size and deliberated STM32F446 size.
12935 - STM32 F4: Typo in stm32f76xxxx_pinmap.h edited online with
12937 - STM32 F7: stm32_i2c.c Dejavu. Fixes a bug previously found in the
12939 - STM32 F7: OTGDEV fixed typo. From David Sidrane.
12940 - STM32 F7: Fix to SPI-Master driver. Without this the chip select
12942 - STM32 F7: STM32F7 SD/MMC driver depends on CONFIG_SDIO_DMA which is
12945 - STM32 F7: Fix some STM32F7 copy paste errors. From David Sidrane.
12946 - STM32 L4: Complementary PWM outputs on STM32L4" (1) too many
12949 - STM32 L4: Fix I2C devices RCC registers. From Sebastien Lorquet.
12950 - STM32 L4: Enable and renaming for 32l4 UARTs 4 and 5. From Sebastien
12952 - STM32 L4: Change the way to configure quadrature encoder prescalers.
12954 - STM32 L4: Correct USART1/2 definitions. Use default mbed UART4
12959 - STM32F103 Minimum: Fix Timers 2 to 7 clock frequencies. From Alan
12961 - Nucleo-F303RE: Remove duplicate setting from board.h. From Marc
12963 - Nucleo F303RE: Various fixes to get the ADC configuration building
12965 - Nucleo L476RG: Add better selection of timer.
12969 - DK-TM4C129x: Typo fix. From Wolfgang Reißnegger.
12973 - ESP32 core v2: Flush the UART TX buffer in the esp32 serial shutdown
12978 - Xtensa ESP32: Corrects a problem with dispatching to signal
12986 - ESP32 core v2: Changes the openocd config file's default flash
12988 save some hard-to-debug moments down the track (3.3V-only flash
12989 running at 1.8V often half-works and does weird things...). From
12994 - libc/stdio: Fixes sscanf() %sn where strlen(data) < n. From David
12996 - libc/stdio: Include wchar.h in lib_libvsprintf.c to fix compilation
12998 - include/sys/time.h: timersub macro modified per recommendations of
13000 - include/ctype.h and cxx/cctype: Implement ctype.h functions as inline
13002 - include/: Fix a number of header files with mismatched 'extern C {'
13004 - libc/unisted: Change brings strtol() and related functions more
13005 conformant with POSIX. Corner cases like strtol(-2147483648, NULL,
13006 10) now pass clang -fsanitize=integer without warnings. From Juha
13008 - libc/unistd: sleep() was returning remaining nanoseconds (kind of),
13010 - termios.h: Fix CRTSCTS define to include input and output flow. From
13015 - configs/*/defconfig: The buttons example was changed to archbuttons.
13018 - config/*/defconfgs: More fallout from name change of
13020 - configs: All QE encoder files. Last change made timer hard-coded to
13022 - configs: Remove all traces of the no-longer existent ARCHBUTTONS
13025 - minnsh Configurations: Remove minnsh configurations and support
13029 up_getc() and up_putc() directly, and (2) while waiting for character
13035 - Make.defs: Using wrong link script if native window tool used with
13040 - ESP32 Core v2 Platform: Fix some naming that prevented building the
13045 - NSH Library: nsh_getdirpath(), use snprint instead of sprintf to
13050 - Remove std_readline(). This called up_getc() and up_putc() directly,
13055 - FTPD: Fixed bug that didn't free ftpd resources on exit. From Pascal
13057 - NTP client: Fix missing left parenthesis. From Pierre-Noel Bouteville.
13058 - cJSON: Import patch to fix:cJSON_PrintUnformatted() behaves unexpected
13060 2012-04-19. From Pierre-Noel Bouteville.
13061 - esp8266 update cosmetic and many bug fix. From Pierre-Noel Bouteville.
13062 - FTPD: Fix bug un ftpd file or socket may be not closed. From
13063 Pierre-Noel Bouteville.
13067 - Modbus Master is missing many files and doesn't compile at all. More
13074 - The examples/qencoder app was trying to init the encoder by a direct
13077 - apps/examples/timer: Should detach signal handler before exiting.
13078 - examples/qencode: The examples/qencoder app was trying to init the
13082 - apps/examples/archbuttons: Removed because it violates OS interface
13084 - examples/adc, pwm, can: Remove all usage of BOARDIOC_ADCTEST_SETUP,
13088 - examples/ostest: Add some delays to the pthread cancellation test.
13091 NuttX-7.20 Release Notes
13092 ------------------------
13095 and is available for download from the Bitbucket.org website. Note
13096 that release consists of two tarballs: nuttx-7.20.tar.gz and
13097 apps-7.20.tar.gz. These are available from:
13102 Both may be needed (see the top-level nuttx/README.txt file for build
13109 - Kernel Modules: Module initializer may now return a symbol table.
13110 - Modules: Extend the module interface so that we can access symbols
13112 - Shared Libraries: In the FLAT build mode, kernel modules may be
13114 - Modules/Shared Libraries: Add support for dependencies between
13116 - Module Library: Add build a configuration logic for a shared module
13118 - Shared Libraries: Implement module based shared libraries for the
13120 - Interrupt handling: irq_attach() now includes an argument of type
13125 - Adapt many drivers to utilize the IRQ argument feature.
13126 - All functions that used to return an xcpt_t old handler value, now
13127 return an int error code. The oldhandler value is no longer useful
13132 - IRQ subsystem: Add support for smaller interrupt tables as
13139 - Pseudo File System: Add support for soft links in the top-level
13141 - Soft links: Add an implementation of readlink().
13142 - Add fstat() support. Implement fstat() method in binfs, romfs,
13144 - fstat: Add fstat() support to FAT. From Alan Carvalho de Assis.
13148 - Fonts: Add support for Tom Thumb small mono-space font. From Alan
13150 - Graphics: Separated of font cache from graphics/nxterm. Now in
13156 - Ethernet drivers: Add framework for serialization in the case where
13157 multiple low-priority work queues are used.
13161 - Add capabilities() method to SDIO interface. Remove
13165 - Removed dmasupported() method from the SDIO interface. That is now
13167 - drivers/sensors: Add driver for the ST L3GD20 3 axis gyro. From
13172 - SAM3/4: Add support for ATSAM4S4C. From Wolfgang Reißnegger.
13176 - Sabre 6quad: Enable examples/smp test in i.MX6 SMP/NSH
13181 - Kinetis: Added support for CHIP_MK60FN1M0VLQ12 chip. From Maciej
13183 - Kinetis: Add support for K64/K66 RTC lower half driver. From Neil
13185 - Kinetis: Extensive modification of MCG support based feature
13187 - Kinetis: Add support for K66 family. From David Sidrane.
13188 - Kinetis: Created a kinetis SIM versioning scheme pulled in by
13190 - Created a kinetis PMC versioning scheme pulled in by Kinetis
13192 - Kinetis: Extend clock configuration logic. Refactor
13197 - Kinetis Ethernet: Kinetis Support RMII clock source select. This
13199 to be made via Kconfig. From David Sidrane. Freedom-K66F uses
13201 - Kinetis Serial: Added configurable 1|2 stop bits.
13202 HAVE_SERIAL_CONSOLE -> HAVE_UART_CONSOLE to be consistent with
13204 - Kinetis LPserial: Add LPUART serial driver and Clock
13205 configuartaion to freedom-k66f board. From David Sidrane.
13206 - Kinetis USB device: Refactor clocking in kinetis_usbdev. From
13211 - Add support for NXP Freedom-k66f development board. From David
13213 - Kinetis Freedom K66F: Add Ethernet support. From David Sidrane.
13214 - Add twr-k64f120m config. From Marc Rechté.
13218 - Bamboo-200E: Add netnsh configuration. From Alan Carvalho de Assis.
13219 - Add usbnsh config to Bambino 200E board. From Alan Carvalho de
13224 - STM32 F7: Allow board to configure HSE clock in bypass-mode. This
13225 is needed to enable HSE with Nucleo-F746ZG board. From Jussi
13227 - STM32 F7: stm32_allocateheap: allow use DTCM memory for heap.
13231 - Add basic support for the STM32F334. From Mateusz Szafoni.
13232 - STM32F33XX DAC, OPAMP, COMP, ADC, HRTIM headers. From Mateusz
13237 - STM32 F7 SDMMC: Add support for single bit operation on SDMMC2.
13238 - STM32 L4: Port STM32L4 SAI driver from MDK.
13239 - STM32 L4: Bring power management logic from Motrola MDK into NuttX.
13240 - STM32 L4: Bring LPTIM driver in from the Motorola MDK.
13241 - STM32 L4 COMP: Port from Motorola MDK.
13245 - STM32F429i Discovery: Add support for NxWM on STM32F429i-Disco
13247 - STM32F103 Minimum: Add support for nRF24 on STM32F103-Minimum
13249 - Olimex STM32 P407: Add a NSH protected build configuration; Enable
13251 - Olimex STM32 P407: Add support for on-board microSD slot.
13252 - STM32F429i Discovery: Add support for the L3GD20 driver. From
13254 - STM32F103 Minimum: Add support to QEncoder on STM32F103 Minimum
13256 - Olimex STM32 P407: Add external SRAM support.
13257 - Add basic support for the Nucleo F334R8 board. From Mateusz
13259 - STM32F103 Minimum: Add SDCard support over SPI on STM32F103-Minimum
13261 - STM32F103 Minimum: Add support to USB Device on STM32F103-Minimum
13266 - compiler.h: packed_struct replaced by begin_packed_struct and
13269 - Math library: Leverage optimized ARMv8-M functions from BSD license
13271 - Shared libraries: Add a non-standard dllfnc.h function to set the
13273 - C Library: Add a support for setvbuf(). This is a collaborative
13275 - C Library: Add setbuf() which is a trivial wrapper around setvbuf().
13276 - C library: Add swab().
13277 - C library: Add strtoimax and strtoumax.
13278 - C library: Add ffs(), rindex(), an index(). Add strings.h. Move
13283 - C library: Add fstatfs().
13284 - Update cwchar. Add cwctype.
13288 - Add configuration support for builds with Ubuntu under Windows 10.
13292 - tools/noteinfo.c: A hack tool that I use to analyze some sched_note
13294 - tools/mkconfig.c: Add logic to keep all of the buffering options in
13299 - NSH: Add support for the 'ln' command.
13300 - NSH ls command: if node is a symobolic link, use readlink() to get
13302 - NSH: Add readlink command.
13306 - apps/examples/nxtext: Make line spacing configurable.
13307 - apps/system/zmodem/host/nuttx/compiler.h synchronized with
13309 - apps/examples/sotest: Add a test for shared libraries.
13310 - apps/examples/ostest: Add a test of setvbuf().
13311 - apps/examples/stat: Add a simple test for stat(), fstat(),
13314 Works-In-Progress:
13316 * IEEE802.14.5/6LowPAN. Hooks and framework for this effort were
13317 introduced in NuttX-7.15. Work has continued on this effort on
13320 least NuttX-7.21.
13323 ChangeLog for the complete list of bugfixes and for additional, more
13328 - SMP: There were certain conditions that we must avoid by preventing
13330 But this logic was incomplete; there was no logic to prevent other
13336 - SMP: Make checks for CPU lock set more robust. There are certain
13339 - sched_cpulocked: Avoid use of spinlock. That has been reported to
13340 cause a deadlock (2016-12-28).
13341 - SMP: Fix a gap where we may try to make modifications to the task
13347 - SMP: Fix an error in critical section logic when performing a
13349 not being set for the CPU so other CPUs did not know about the
13351 - SMP Signals: Fix some SMP signal delivery logic. Was not handling
13354 - SMP: Fix timer related issues: Round robin and sporadic
13355 scheduling were only being performed for tasks running on the CPU
13357 measurements were only be processed for running on the CPU that
13359 - sched_note: Fix spinlock instrumentation. From Masayuki Ishikawa.
13360 - In all implementations of _exit(), use enter_critical_section() vs.
13362 - sigtimedwait: When timer expires, up_unblock_task() is called.
13367 - Fix a compile error: in sched_cpuload.c:Line136, the variables ts
13371 - CPU load: Correct computation of the nominal period to use when the
13373 - Cancellation points: Fix some backward logic in conditional
13375 - Remove an unused variable when calling sigwaitinfo() and
13380 - procfs: Correct to snprintf-related errors in fs_procfsproc.c.
13382 - Add logic to VFS rename: If target of rename exists and is a
13386 - Fix open() a block device with
13388 - File System: Don't build block driver proxy if PSEUDOFS_OPERATIONS
13390 - sendfile(): Fix error introduced with commit
13395 - NxWM configurations. If using a 7-bit character set, then the
13398 - NX server: Correct message queue names. Should not be at /dev,
13403 - MMCSD_SDIO: Only wait for card ejected if card detection is
13405 - Typos withim mtd/ with Macronix MX25L. In
13408 - USBMSC: Always set LUN readonly flag. From Wolfgang Reißnegger.
13409 - drivers/lcd: ssd1306_configspi() must have global scope.
13410 - MMC/SD SDIO: Some drivers need to start DMA before sending CMD24
13412 - drivers/tone.c: Handle configuration with multiple PWM channels.
13415 - drivers/tone.c: 50% duty needs to be expressed a a fixed precision
13417 - drivers/spi/Kconfig: There is too much SPI in the configuration
13419 - option to enable Memory Card debug output was hidden with SD cards
13421 - usbhost_cdcacm: fix tx outbuffer overflow and remove now invalid
13426 - Networking: Fixed some issues that prevented IPv6 from working with
13427 IPv4 enabled. From Pascal Speck.
13428 - Networking: fixed a nullptr-dereference on iob_clone. From Pascal
13430 - Ethernet: Need two work structures (minimum) in all Ethernet
13434 * ARMv7-R:
13436 - I found an issue inside the cp15_coherent_dcache function: The
13438 configurationa. In non-SMP configuration this instruction could
13443 - SAM3/4: GPIO bit numbering typo fixes. From Wolfgang Reißnegger.
13447 - Add missing sched_note_*() calls in sam4cm SMP functions.
13451 - Kinetis: Fixed wrong MCG VDIV calculation on new NXP K60. From
13453 - Kinetis: Need to set HAVE_UART_DEVICE when UART4 is selected. From
13455 - Kinetis MCG: Wrong FRDIV set in MCG_C1. From Maciej Skrzypek.
13459 - Kinetis Serial: Fixed compile error when UART5 is selected. From
13461 - Kinetis SDHC - Enable clock after selected. From David Sidrane.
13462 - Kinetis: Correct some SPI and I2C configuration issues. From
13464 - Kinetis Ethernet: Add #define for number of loops for auto
13466 - Kinetis Werial: Fixed up_rxint - did not disable the RX
13472 - LPC43 pinset definitions: Add more 1 bit to pinset to reach
13473 SFSCLK0-SFSCLK3. Remove PINCONFIG_DIGITAL. From Alan Carvalho de
13478 - LPC43 serial: Correct conditional logic that selects /dev/ttySN.
13483 - i.MX6: Fix clearing GPT status register. From Masayuki Ishikawa.
13487 - STM32, STM32L4 Oneshot: Fix logic so that it can support multiple
13489 - STM32 F7: Added missing ARCH_HAVE_RESET for F7. From David Sidrane.
13490 - STM32: Add missing STM32_BKP_BASE. From David Sidrane.
13491 - STM32 and STM32F7: Fixes the BKP reference counter issue. From
13496 - Fix for SAMv7 SPI: DLYBS value was calculated, but never written to
13499 - STM32 QEncoder: Fix QEncoder driver, based on STM32L4 driver. From
13501 - STM32 QEncoder: Enable clocking to the timer on QE setup; disable
13503 - STM32 Ethernet: Need two work structures so that pending poll work
13506 - STM32 OTGHS host: stm32_in_transfer() fails and returns NAK if a
13512 implementations for STM32 L4 and F7.
13516 - STM32F4 Discovery: Fix issues with QEncoder support. From Alan
13521 - Add debug assertion in libdtoa to catch attempts to use floating
13524 to allocate memory. From Pierre-noel Bouteville.
13525 - libc: Fix ARMv7-A/R memcpy assembly.
13526 - Fix return value if x is NaN. From Aleksandr Vyhovanec.
13530 - NSH: Eliminate a warning when all memory inspection commands are disabled.
13534 - apps/graphics/traveler/tools: Fix linkage issue. The -lm should
13535 come after -o binname. From Alan Carvalho de Assis.
13539 - The CONFIG_NETUTILS_HTTPD_PATH constant is used by httpd_mmap.c and
13545 - Configurations that enable OSTEST must not disable signals.
13546 - apps/examples/ostest: Was ignoring
13548 - In apps/examples/mtdpart/mtdpart_main.c where
13552 NuttX-7.21 Release Notes
13553 ------------------------
13556 and is available for download from the Bitbucket.org website. Note
13557 that release consists of two tarballs: nuttx-7.21.tar.gz and
13558 apps-7.21.tar.gz. These are available from:
13563 Both may be needed (see the top-level nuttx/README.txt file for build
13570 - pthread rwlocks: Add an implementation for read/write locks
13573 for writing. From Mark Schulte.
13574 - pthread robust mutexes: Implement robust mutex support:
13576 mutex is locked by a thread that no longer exists. Add
13580 marked inconsistent and the highest priority thread waiting for the
13585 - pthread cancellation points: Add logic to disable cancellation
13590 - clock: Add clock_resynchronize and use subseconds RTC. Add
13591 clock_resynchronize for better synchronization of CLOCK_REALTIME and
13592 CLOCK_MONOTONIC to match RTC after resume from low-power state. Add
13597 - clock: Add new type ssystime_t for relative 64-bit ticks, change
13598 ticks<->time conversion functions to use ssystime_t. From Jussi
13600 - clock: Add testing for 32-bit overflow of 64-bit system timer. From
13605 - drivers/mtd/w25.c: Erase sector only if it is not in erased state.
13610 - drivers/lcd: Extend st7565 driver to include support for the
13612 - drivers/lcd: Add driver for Nokia 5110 (Philips PCD8544). From Alan
13617 - Extensive modifications to support wireless network (see below).
13618 - TUN driver: Implement TAP (OSI layer 2) mode. Enable by setting the
13621 - Add user-space networking stack API (usrsock). User-space
13622 networking stack API allows user-space daemon to provide TCP/IP
13623 stack implementation for NuttX network. Main use for this is to
13624 allow use and seamless integration of HW-provided TCP/IP stacks to
13625 NuttX. For example, user-space daemon can translate /dev/usrsock
13626 API requests to HW TCP/IP API requests while rest of the user-space
13629 - net/: Network driver now retains Ethernet MAC address in a union so
13635 - BCM43362: Support for Broadcom's BCM43362 WiFi chip was contributed
13639 board, the infrasture for IEEE 802.11 FullMAC networking including
13642 - IEEE 802.11 networking tools and support.
13643 - IEEE 802.15.4 MAC support. This is an effort that was started some
13647 the Mikroe Clicker2-STM32 board along with a PC-based IEEE 802.15.4
13650 - Microchip MRF24J40: As mentioned above, this IEEE 802.15.4 radio
13652 - IEEE 802.15.4 Network Driver: A driver that interfaces the NuttX
13655 - IEEE 802.15.4 Network Loopback Driver: A simple IEEE 802.15.4 MAC
13656 loopback driver was developed. This driver allowed for parallel
13658 - 6LoWPAN: The Contiki 6LoWPAN stack has been ported so that works
13662 the loopback driver. There are no known problems and the stack
13663 is ready for additional testing.
13664 - Add option to enable wireless debug output.
13668 - Add entropy pool and strong random number generator. Entropy pool
13669 gathers environmental noise from device drivers, user-space, etc.,
13670 and returns good random numbers, suitable for cryptographic use.
13672 for CSPRNG output. Patch also adds /dev/urandom support for using
13673 entropy pool RNG and new 'getrandom' system call for getting
13674 randomness without file-descriptor usage (thus avoiding file-
13678 - XBox One controller: Adds USB host driver support for the XBox One
13682 - drivers/analog: Add basic COMP driver. From Mateusz Szafoni.
13683 - drivers/analog: Add driver for the LTC1767L ADC. From Martin
13685 - drivers/analog: Add basic OPAMP driver. From Mateusz Szafoni.
13686 - drivers/sensors: Add driver for ST HTS221 humidity sensor. From
13688 - drivers/sensors: Add driver for ST LPS25H pressure sensor. From
13690 - drivers/sensors: Add driver for ST LIS2DH accelerometer. From Timo
13692 - drivers/usbmisc: Add driver for Fairchild FUSB301 USB type-C
13694 - RTC: Add interface for check if RTC time has been set. New
13697 application attempt to get real time by other means (for example, by
13699 - Buttons: Change return value of board_buttons() and the type of
13702 - drivers/syslog: Use monotonic clock for timestamp when available.
13704 - SPI: Add an instance argument to the SPIDEV definitions. Thus,
13705 instead of specifying a FLASH device, for example, as SPI_FLASH, you
13709 - IOBs: Move from net/iob to a better location in mm/iob where they
13712 - syslog: Add option to buffer SYSLOG output to avoid interleaving.
13716 - drivers/can: Move CAN subsystem to its own directory and put device
13718 - drivers/can: Add Microchip MCP2515 CAN Bus controller driver. From
13720 - drivers/audio: Add cs43l22 audio driver. From Taras Drozdovsky.
13721 - drivers/input: Add Cypress MBR3108 CapSense touch button driver.
13726 - configs/sim/sixlowpan: Configuration for testing the 6LoWPAN with
13731 - arch/arm/src/xmc4: Initial, partial support for Infineon XMC4xxx.
13735 - XMC4500 Relax: Add basic board support infrastructure of Infineon
13737 for a simple NSH configuration. There are still stome remaining
13742 - pic32mx7mmb: Add support for the Pinquino toolchain.
13743 - pic32mx7mmb: Add support for PROCFS file system.
13747 - Kinetis: Allow board to add pullups on SDHC lines. From David
13749 - Kinetis: Use optional BOARD_OSC_CR and BOARD_OSC_DIV in clock
13754 - Kinetis: Add Timer PWM Module (TPM) to K66 chip. From David
13756 - Kinetis: Added HW flow control and termios. From David Sidrane.
13757 - Kinetis: Add ARCH_HAVE_I2CRESET. From David Sidrane.
13761 - Add support for LPC4337FET256. From Andreas Bihlmaier.
13765 - Change STM32 tickless to use only one timer. From Konstantin
13767 - STM32 F7: Add support for LSE RTC and enable RTC subseconds. From
13769 - STM32 L1: stm32l15xx_rcc: Add support for using MSI as system
13771 - STM32 L1: stm32l15xxx_rcc: configure medium performance voltage
13772 range and zero wait-state when allowed by SYSCLK setting. Zero
13773 wait-state for flash can be configured when: (1) Range 1 and
13778 - STM32 F0: Add basic support for STM32F0. From Alan Carvalho de
13780 - STM32 F0: Add basic support for STM32F07x family.
13781 - STM32 L1: stm32l15xx_rcc: Allow board to configure HSE clock in
13782 bypass-mode. Allows using MCO output from ST-link chip (on Nucleo
13784 - STM32 L1: Add support for STM32L152CC, STM32L152RC and STM32L152VC.
13786 - STM32 F0: Add support for HSI48.
13787 - STM32 L4: Add support for the STM32L496XX family. From Juha
13789 - STM32 L4: modularize Kconfig to support different product
13791 each chip in Kconfig but allow for flash size override. Commit adds
13793 - STM32 L4: Separate SYSCFG into product line specific files for
13795 - STM32 L4: Add support for many new MCUs from the STM32L4X3XX
13797 - STM32 L4: Add dbgmcu header files. From Juha Niskanen.
13798 - STM32 F410: Add support for STM32F410. STM32F410 is a version of
13800 Goavec-Merou.
13804 - SDIO: Extensions to support the SDIO interface to the BCM43362 from
13806 - STM32 F2: Add USB OTG HS support for stm32f20xxx cores. From Simon
13808 - STM32 F2, F4, and F7: Add BOARD_DISABLE_USBOTG_HSULPI flag. From
13810 - STM32 F33: Move DMA logic to a separate files + add ADC support.
13812 - STM32 F3: Add COMP support. From Mateusz Szafoni.
13813 - STM32 F33: Support for COMP character driver. From Mateusz Szafoni.
13814 - STM32 F4: Implement DMA support for the STM32F4 I2C. From Rajan Gill.
13815 - STM32 F7: Add stm32 RNG support. This is copied from stm32l4.
13817 - STM32 L1: Add STM32L162VE to chip.h. From Juha Niskanen.
13818 - STM32 F4: Add I2C3 SDA pin mapping for STM32F411. From no1wudi.
13819 - STM32 L1: stm32_flash: Add EEPROM writing for STM32L15XX. From
13821 - STM32 F7: Serial: Add interface to get uart_dev_t by USART number,
13823 - STM32 F4: Provide TIM5 definition for STM32F429. From Matias v01d.
13824 - STM32 F0: Add an untested port of the F1 USB device to the STM32F0.
13825 - STM32 F0: Add support for the STM32F09X family. From Juha
13827 - STM32 F0: Initial cut at I2C driver. Still a work in progress.
13829 - STM32 F33: Add OPAMP support. From Mateusz Szafoni.
13830 - STM32 L4: stm32l4_i2c: Add I2C4 code. From Juha Niskanen.
13831 - STM32 L4: Add GPIO_PORTI definition. From Juha Niskanen.
13832 - STM32 F7 Serial: Allow configuring Rx DMA buffer size. From Jussi
13834 - STM32 L4: Firewall for stm32l4x3xx. Not tested for any product
13837 - STM32 TIM: Add method to get timer width. Freerun timer: Use timer
13839 - STM32 L4: Add internal flash write support. From Juha Niskanen.
13840 - STM32 L4: Port stm32l4_serial_get_uart function from STM32F7. From
13842 - STM32 Ethernet: Add support for KSZ8081 PHY interrupts. From
13844 - STM32 F4: Add I2S driver. From Taras Drozdovsky.
13845 - STM32 L4: Add IWDG peripheral. This is the same as for STM32
13848 - STM32 F7: Add SPI DMA support. From Jussi Kivilinna.
13852 - Support for the Particle Photon board was contributed by Simon
13853 Piriou. The Photon board is based on a STM32F205G MCU with and on-
13857 available for nsh, usbnsh, and wlan configurations.
13858 - Clicker2-STM32: Support for the Mikroelektronika Clicker 2 for
13862 initialization logic and SPI support. Configurations exist for nsh,
13863 knsh, usbnsh, and mrf24j40-radio.
13864 - Nucleo_F334R8: Add ADC example. From Mateusz Szafoni.
13865 - Nucleo-F334R8: Add COMP support. From Mateusz Szafoni.
13866 - Nucleo-F334R8: Use new COMP driver. From Mateusz Szafoni.
13867 - Adds USB host support to stm32f411-disco board. From Brian Webb.
13868 - Add stm32f0discovery board support. From Alan Carvalho de Assis.
13869 - Nucleo-F072RB: Add board configuration.
13870 - Nucleo-F334R8: Add OPAMP support. From Mateusz Szafoni.
13871 - Nucleo-F072RB: Add support for the I2C driver used by I2C tools.
13872 - Nucleo-L496ZG: Add nucleo-l496zg board files. From Juha Niskanen.
13873 - Nucleo-F091RC: Add nucleo-f091rc board files. From Juha Niskanen.
13874 - Nucleo-L432KC: Add nucleo-l432kc board files. From Sebastien
13876 - Nucleo-L452RE: Add nucleo-l452re board files. From Juha Niskanen.
13877 - stm32f103-miniumum: Add board support to use the Nokia 5110
13882 - C library: Add strerror_r().
13883 - C Library: Add wcstoull(), swprintf(), wcstod(), wcstof(), wcstol(),
13887 - C Library: Add ffsl(), ffsll(), fls(), flsl(), flsll() and use
13888 GCC's __builtin_ctz/__builtin_clz for faster implementation of these.
13890 - fixedmath: Add square root and b32_t conversion operators. From
13892 - locale.h: Add a bogus definition of locale_t.
13893 - C library: Versions mbrlen and mbsrtowcs taken and adapted from
13899 - Include C++ library in 'make export'. From Alan Carvalho de Assis.
13900 - configs: Remove all setenv.sh and setenv.bat files. Remove all
13901 references to setenv.sh and setenv.bat from all config README files.
13902 - Kconfig/deconfigs: Add CONFIG_ARCH_TOOLCHAIN_GNU to indicate that
13904 CPU-specific versions of the same definition.
13905 - Move prototype for up_cxxinitialize() from nuttx/include/nuttx/arch.h
13910 - Add initialconfig.c so that perhaps in the future we will be able to
13917 - Added support for set [{+|-}{e|x|xe|ex}] [<name> <value>]. Set the
13924 Use 'set -e' to enable and 'set +e' to disable (ignore) the exit
13925 condition on commands. The default is -e. Errors cause script to
13926 exit. Use 'set -x' to enable and 'set +x' to disable (silence)
13928 default is +x. No printing of a trace of script commands as they are
13930 - Print expanded variables if -x. From David Sidrane.
13931 - ifconfig command: Extend ifconfig to support 6LoWPAN. Adapt to
13933 - Network initialization: If IEEE802.11 selected use wlan0 instead of
13934 eth0 for network device name.
13935 - Network initialization: NSH now has configuration options to select
13939 - Network initialization: Add a new option CONFIG_NSH_NETLOCAL that
13945 - examples/xbc_text: Adds a test program for the XBox One controller
13947 - examples/ostest: Add a test of robust mutexes.
13948 - examples/ostest: Add tests for pthread_rwlock. Adding tests to be
13950 - examples/ostest: Additional test for rwlock and one for cancel
13952 - examples/usrsocktest: Add application for USRSOCK testing. From
13954 - examples/nettest: Adapt for use in testing 6LoWPAN.
13955 - examples/nettest: If doing loopback, but not using the official
13958 - examples/udpblaster: Several fixes to work with 6LoWPAN.
13959 - examples/udpblaster: Add logic to bind the local UDP socket to a
13960 well-known address.
13961 - examples/configdata: Add stacksize and priority. From Juha Niskanen.
13965 - netutils/netlib: Add IEEE 802.11 wireless IOCTL wrappers.
13966 - netutils/netlib: Add a helper function to convert a string to a
13968 - netlib and NSH: Add logic to get/set the IEEE802.15.4 PAN ID.
13969 - netutils/dhcpc: Make the network device name a configuration
13971 - netutils/dhcpc: Remove hard-coded interface device. Now passed as
13976 - wireless/wapi: Port of Wapi wireless services. The original
13981 - wireless/wapi: Create command line Wapi application based on
13983 - wireless/wapi: wpa_driver_wext_associate() now accepts a
13986 - wireless/wapi: Add basic wapi_event_stream_extract implementation.
13988 - wireless/ieee802154: Add iwpan and i8sak tools. iwpan is similar
13991 - wireless/ieee802154/libmac: IEEE 802.15.4 MAC library.
13992 - wireless/wext: Add drivers_wext from the WPA supplicant; Integrate
13997 - apps/system/dhcpc: Add a command to renew or establish a lease on an
13998 IPv4 address.
13999 - apps/system/ntpc: Add a command to start or stop the NTPC daemon.
14000 - apps/system/ramtest: Make stacksize and priority conigurable.
14002 * Platform-Specific Support (apps/platform)
14004 - apps/platform: Create gnu/ subdirectory that contains the one and
14009 ChangeLog for the complete list of bugfixes and for additional, more
14014 - Priority inheritance: When CONFIG_SEM_PREALLOCHOLDERS==0, there is
14015 only a single, hard-allocated holder structure. This is problem
14022 inheritance. This fix is to add two hard-allocated holders in the
14023 sem_t structure: One of the old holder and one for the new holder.
14024 - Priority inheritance: sem_holder sem_findholder missing
14027 - Partial Fix priority inheritance CONFIG_SEM_PREALLOCHOLDERS=0. From
14029 - Priority inheritance: sem_boostholderprio prevent overrun of
14030 pend_reprios. The second case rtcb->sched_priority <=
14031 htcb->sched_priority did not check if there is sufficient space in
14033 - lp_worker: Guard from pend_reprios overflow. From David Sidrane.
14034 - Priority inheritance: Fixes improper restoration of base_priority in
14047 holder->tcb. An alternate approach could be to leve the interface
14053 - Priority inheritance: Fixes improper restoration of base_priority.
14055 - sem_holder: Indexing error. From David Sidrane.
14057 if (sem->holder[0].htcb != NULL || sem->holder[**1**].htcb != NULL)
14058 - realloc(): When realloc() has to fall back to calling malloc(), size
14061 - scheduler: Fix tg_flags check with GROUP_FLAG_NOCLDWAIT. From Masayuki
14063 - scheduler: Fix CHILD_FLAG_EXITED in include/nuttx/sched.h. From
14065 - binfmt/elf: Fix offset value when calling elf_read() in
14067 - binfmt/elf: Fix offset value when calling elf_read() in
14069 - There can be a failure in IOB allocation to some asynchronous
14071 (1) Task A holds an IOB. There are no further IOBs. The value of
14073 IOBs, it calls sem_wait(). The value of semcount is now -1. (2)
14088 task waiting for an IOB, it will go into the committed list rather
14094 - binfmt: Fix .dtor memory allocation. From Masayuki Ishikawa.
14098 - SmartFS: If whence is SEEK_END, the file offset shall be set to the
14100 - mtd/progmem: Fix incorrect target address calculation.
14104 Byte-oriented read/write interfaces of mtd device accept the target
14106 - procfs: Fix wrong member IDs are displayed when 'cat
14108 - procfs: Fix incorrect uptime with CONFIG_SYSTEM_TIME64. From
14110 - vfs/poll: round timeout up to next full tick. Calling poll() with
14113 should be rounded up. Open Group spec for poll says:
14119 - mtd/config: erase block between block read and write. From Juha
14121 - mtd: Build RAMTRON and AT45DB drivers only if selected. From Juha
14123 - mtd/config: Fix byte read interface test. From Juha Niskanen.
14124 - mtd: Fix some unallocated and NULL pointer issues. rwb->wrflush and
14125 rwb->wrmaxblocks in rwbuffer could get unallocated values from
14136 These problems are caused by CONFIG variable differences between the
14139 - net procfs: Fix buffer corruption and refactor netdev_statistics.c.
14141 - FAT: Fix 'Missing unlock' in fs_fat32.c. From Masayuki Ishikawa.
14142 - VFS fdopen: Add missing file stream flags clearing. Clear file
14143 stream structure regardless of config options. Structure clearing is
14146 - mtd/smart: Fix use of uninitialized variable. From Jussi Kivilinna.
14147 - mtd/w25.c: Enable short delay after sector/chip erase. From Jussi
14149 - mtd/config: Add some error checks for I/O errors. From Juha
14154 - net procfs: Some long lines were being generated that cause buffer-
14159 - Fixed wrong assert on udp dgram send. From Pascal Speck.
14160 - TCP/IPv6: Fix a compile issue when IPv6, but not IPv4 is enabled.
14161 - net/socket/accept: Fix building with CONFIG_NET_LOCAL_STREAM. From
14163 - Argument of network device IOCTL should be unsigned long, just as
14165 - net/socket: Fix cloning of local and raw sockets. From Jussi
14167 - TCP: Wait for 3-Way Handshare before accept() returns. From Simon
14169 - TCP: Send RST if application 'unlistens()' before we complete the
14171 - TCP: An RST received during the 3-way handshake requires a little
14172 more clean-up.
14173 - IPv6: Fix net_ipv6_pref2mask(). From Masayuki Ishikawa.
14174 - network IOCTL commands: The only place in net/netdev/netdev_ioctl.c
14175 where the interface state should change is for SIOCSIFFLAGS. The
14178 - TCP: Fix tcp_findlistner() in dual stack mode. From Masayuki
14183 - Fix as5048b by adding missing frequency parameter. From Andreas
14185 - multiple fixes in nrf24l01 driver: (1) signal POLLIN if there is
14190 - input/mxt: Prevent overriding i2c transfer return value.
14194 - drivers/audio/wm8904: WM8904 has same problem as that fixed by Juha
14196 - UART 16550: Missing left parenthesis in function prototype. This is
14198 - USBMSC: Fix a wrong lun number issue. From Masayuki Ishikawa.
14199 - drivers/i2c: Fix compile issues if CONFIG_DISABLE_PSEUDOFS_OPERATIONS
14201 - drivers/serial: I discovered a problem in the file
14208 - drivers: Fix some bad NULL checks. From Juha Niskanen.
14209 - drivers: Rename newly introduced up_i2creset to I2C_RESET. From
14211 - drivers/bch: BCH character driver bch_ioctl() always returns -ENOTTY
14212 for DIOC_GETPRIV command. It should returns OK if DIOC_GETPRIV
14214 - Replace sprintf() with snprintf() in pipe.c. From Nobutaka Toyoshima.
14215 - drivers/bch: Fix 'Missing Unlock' in bchdev_driver.c. From Masayuki
14217 - button_upper: Fix interrupt enabling for poll-events. From Jussi
14219 - drivers/{sensors,usbmisc}: Fix uninitialized I2C frequency. From
14224 - Set EABI stack alignment for all ARM architectures (remove OABI
14226 - Remove redundant interrupt stack coloring and OABI code. From David
14228 - Fix off-by-one interrupt stack allocation in 8-byte aligned
14231 * ARMv6-M:
14233 - CONFIG_DEBUG_HARDFAULT should be available for Cortex-M0 too.
14237 - SAM3/4: Fixed configurations for TWI master. Obviously an
14242 - SAMV7: Watchdog: Fix Forbidden Window Value. According the Datasheet
14252 - SAMV7 EMAC: Add conditional logic to account the fact that the
14257 - Kinetis: Fixed GPIO _PIN_OUTPUT_LOWDRIVE swapped with
14259 - Ensure interrupts are back on BEFORE running code dependent on
14261 - Kinetis k66, k64, k60, k40, k20: Pin mux configure all I2C signals as
14262 Open Drain. The output structure of the GPIO for I2C needs to be
14264 slave contending with the push-pull during the ACK. From David
14266 - Kinetis K66: Fixed TMP2_CH1 definition. From David Sidrane.
14267 - Kinetis K66: Define ALT1 to match ref manual. From David Sidrane.
14268 - Kinetis K66: GPIO and pin mux cleanup. From David Sidrane.
14269 - Kinetis ADC: Various corrections and updates. From David Sidrane.
14273 - Add missing PINCONF_INBUFFER in several places of
14275 - Fix logic in preprocessor checks and correct arguments to
14280 - Fix logic error in lpc43_adc. From Andreas Bihlmaier.
14281 - Use correct macro for irqid (fortunately both point to
14283 - Actually write modified value to register. From Andreas Bihlmaier.
14284 - Increase number of supported PWM channels from 4 to 6. From Andreas
14289 - EFM32 I2C: Fix timeout calculation. From Masayuki Ishikawa.
14293 - As discovered by dcabecinhas. This fix assume the 8 byte alignment
14294 options for size stack size or this will overwrite the first word
14296 https://github.com/PX4/Firmware/issues/6613#issuecomment-285869778.
14298 - STM32 F7: In stm32_allocateheap.c There are 5 not 4 configurations.
14303 - STM32, STM32 F7, STM32 L4: OTG host drivers: Do not do data toggle
14305 - Save elapsed time before handling I2C in stm32_i2c_sem_waitstop().
14315 - save elapsed time before reading registers. This way a context
14318 - STM32, STM32 F7, and STM32 L4: Clone Freddie Chopin's I2C change to
14320 - STM32: OTG host implementations of stm32_in_transfer() must obey the
14321 polling interval for the case of isochronous and interrupt endpoints.
14322 - STM32: Fix erase sector number for microcontrolers with more than 11
14327 - STM32: Make up_progmem thread safe. Writing to a flash sector while
14329 add a semaphore and synchronize access to Flash registers. But for
14335 - STM32: Add workaround for flash data cache corruption on
14336 read-while-write. This is a known hardware issue on some STM32 see
14339 - STM32 Flash fixes. From José Roberto de Souza.
14340 - STM32 Flash: Missing unlock on F1 HSI off path. From David Sidrane.
14341 - STM32 F4 I2C: I needed to use DS3231, I remember that in past it
14342 worked ok, but now for stm32f4xx is used another driver (chip
14349 - STM32 F7 Serial: Serial fix for dropped data: (1) Revert the
14352 for details. And (2) Most all CR1-CR3 settings can not be configured
14355 - STM32 L1: Fix IWDG and WWDG debug mode stop for STM32L15XX. From
14357 - STM32 F7: Fix UART7 and UART8 IFLOWCONTROL options. From Jussi
14359 - STM32 F7: Add warning for RXDMA + IFLOWCONTROL combination.
14361 expect. Since RXDMA uses circular DMA-buffer, DMA will always keep
14365 flow-control. Data loss can be demonstrated by doing long up_mdelay
14368 - STM32 F7 Serial: Do not stop processing input in SW flow-control
14370 - STM32 L4 DMA: Correct bad channel definition. From Sebastien Lorquet.
14371 - STM32 F7: Warn if no DMA2 configured when using ADC with DMA. Also
14374 - STM32 F7 ADC: Do not override ADCPRE_DIV when measuring
14376 - STM32 L4: Don't think these chips have DPFPU, DTCM or ITCM. From
14378 - STM32 F7 Flash: macro naming errors, there is no FLASH_CONFIG_F for
14380 - STM32 L4: stm32l4x6xx_pinmap: Update I2C4 and DCMI pins. From Juha
14382 - STM32 L4: stm32l4_i2c: change wrong macro to CONFIG_I2C_POLLED. From
14384 - Fix STM32F7 I2C interrupt handler. From Jussi Kivilinna.
14385 - STM32: Serial Allow configuring Rx DMA buffer size. From David
14387 - STM32 CAN: I had the problem that the transmit FIFO size (= actual
14390 "canerr("ERROR: No available mailbox\n");" in stm32_cansend, so
14396 stm32can_send to determine if the mailbox can be used for sending,
14398 stm32can_txready considered mailboxes OK for sending if the mailbox
14400 the request completed bit is set - stm32can_txinterrupt has to
14402 stm32can_txinterrupt - I removed the if condition, because the CAN
14406 - STM32 Serial: Fix freezing serial port. Serial interrupt
14411 happens because of mismatch of priv->ie (TXEIE == 0) and actually
14413 unhandled TXE interrupt and causes interrupt storm for USART. From
14415 - STM32 I2C: Make private symbols static. From Juha Niskanen.
14416 - STM32 L4 GPIO: Put back EXTI line source selection. From Juha
14418 - STM32 L4 RTC: Store RTC MAGIC to backup reg, not to address zero.
14423 - Disable serial console on stm32f103-minimum usbnsh example project
14424 config. Devices enumerate after this change. From Bob Ryan.
14425 - Nucleo-144: Default for choice in Kconfig was not one of the
14427 - Nucleo-F4X1RE User LEDS: Issue #51 reports compilation problems with
14432 - Tiva I2C: Correct an error in conditional compilation.
14433 - Tiva SSI: Resolves issue 52 'Copy-Paste error in
14438 - C Library vsnprintf(): Fix precision for string formatting. Fixes
14441 - C Library vsnprintf(): If size is zero, then vsnprintf() should
14444 - C Library netdb: in dns_query_callback, ret != -EADDRNOTAVAIL
14447 - C Library netdb: Fix time info in lib_dnscache.c. From Masayuki
14449 - C Library netdb: Fix bugs in lib_gethostbynamer.c. This fix sets
14452 - C Library Defect Workaround: replace '%6.6u' format with an
14457 - Fix mksyscall host binary name. From Alan Carvalho de Assis.
14461 - Fix some calls to task_create(): argv[0] is the first parameter, not
14463 - Bitbucket Issue 5: I found an unexpected behavior in apps/
14465 directory and using Make.defs for Kconfig generation, Kconfig file
14467 path outside of the source tree instead path to sub-directory in
14471 - apps/: Make more globals static to avoid name clashes. From Juha
14476 - NSH library: In nsh_argexand(), if CONFIG_NSH_ARGCAT is defined but
14480 - NSH library: Fix building when CONFIG_NET_USRSOCK enabled with other
14481 link-layers. From Jussi Kivilinna.
14482 - NSH library: Fix some warnings about integer/pointer casts of
14483 different sizes (probably only effects 64-bit simulation).
14484 - NSH library: Fix open flags in nsh_codeccmd.c. From Masayuki
14486 - I need to look at the registers that are at or around 0xe000ef90.
14489 for those two commands are set with calls to strtol() rather than
14490 strtoul(). Changing the two pointer-setting instances to strtoul()
14491 fixes the problem, at least for my architecture/config. From Ian
14493 - NSH library: Fix a resource leak in cmd_hexdump(). From Nobutaka
14498 - apps/examples/hidkbd: Remove call to arch_usbhost_initialize().
14499 That is violation of the OS interfacing rules and will no longer be
14501 board bring-up logic as with any other devices and should not involve
14503 - apps/examples/usbterm: Removed because it is not very useful and
14505 - examples/mm: Fix Makefile. Built-in was not being registered.
14506 - examples/hidkbd: Add some missing configuration settings.
14507 - examples/random: Avoid stack overflows. From Juha Niskanen.
14508 - examples/nettest: Fix an error in pre-processor expression.
14509 - examples/mtdpart: Prevent part array overflow. mtdpart examples
14511 array. This cause buffer overflow for part array. This change fixes
14513 - examples/can: Fix can example app to print data when
14518 - Not a clean fix, but at least makes DHCP working with
14520 - Ensure netlib will not be broken when setip will not bring the
14525 - Fix libcanard github download link to get it compiling correctly.
14527 - Fix to use the new canardInit() function. From Alan Carvalho de
14532 - system/dhcpc: Add missing argument of fprintf.
14536 - The dedicated windows tool at tools/mkkconfig.bat uses $APPSDIR,
14540 NuttX-7.22 Release Notes
14541 ------------------------
14544 and is available for download from the Bitbucket.org website. Note
14545 that release consists of two tarballs: nuttx-7.22.tar.gz and
14546 apps-7.22.tar.gz. These are available from:
14551 Both may be needed (see the top-level nuttx/README.txt file for build
14558 - pthreads: Move functions from sched/pthreads to libc/pthreads. These
14564 - Add power-related debug output.
14568 - RAMTRON: Add support for splitting block writes in chunks. Some
14569 Re-RAMs like MB85AS4MT have a write buffer size limitation. From
14571 - MTD: Add driver for Macronix QuadSPI flash memory. From Simon Piriou.
14575 - SSD1306 LCD Driver: (1) Separate lcd_dev_s setup to separate object.
14583 bits of last byte. (3) Add support for board power control.
14584 ThingseeOne has regulator for controlling display power on/off. Patch
14585 adds support for board based power control to SSD1306 driver. (4) Add
14586 DD-12864WO-4A/SSD1309 support to SSD1306 driver. From Jussi Kivilinna.
14590 - Sockets: Support listening sockets in the getsockname() function.
14592 - IP Forwarding: At the IP level, network may be configured to forward
14593 IP packets that are not destined for the target through a different
14595 - IP forwarding: Add optional support to forward broadcast and
14597 - ICMPv6: Add 6LoWPAN and IP forwarding support.
14598 - ICMPv6: Support source link-layer address option in RA. From
14600 - TUN Driver: Add definitions that will permit TUN-only networking.
14601 - Socket I/F: Created a socket interface used to provide socket support.
14605 - Remove CONFIG_NET_MULTILINK. This increases code size by a little,
14607 - Network procfs: Add support for routing tables at proc/net/route.
14608 - Network procfs: Add support for network procfs statistics for the
14610 - Network Driver Backlog: Remove driver based backlog support. This
14612 supported RX backlog is now via common read-ahead buffering.
14616 - IEEE 802.15.4 MAC / MRF24J60 Driver: Extensive updates for
14617 association/beacon-enabled networks. From Anthony Merlino.
14618 - IEEE 802.15.4 MAC / MRF24J60 Driver: Hook in setdevmode from newly
14620 - IEEE 802.15.4 MAC: Supports get request for coordinator address. From
14622 - IEEE 802.15.4 MAC: Notify radio layer of changes in devmode. From
14624 - IEEE 802.15.4: Add special attribute that can be used to perform a
14626 - IEEE 802.15.4 loopback driver: Better simulation addressing: short
14628 - IEEE 802.15.4 Network Driver: Add logic to setup the network mask,
14629 update the MAC-based IPv6 addressing when the network is brought up.
14633 - PktRadio: Add an infrastructure to support networking on generic
14634 (non-IEEE 802.15.4) packet radios.
14635 - PktRadio Loopback Driver: Add a PktRadio loopback network driver to
14637 - Spirit Network Driver: The Spirit1 radio (SPSGRF-915) is the first
14639 with 8-bit addressing. We need to use the STack packets in order to
14641 - Network procfs: Fix so that PktRadio address are shown correctly.
14642 - Networking: Add support for some packet radio IOCTL commands.
14643 - 6LoWPAN: Added handling for TCP and ICMPv6 packets.
14644 - 6LoWPAN: Add configurable support for 6LoWPAN star topology. With
14648 - 6LoWPAN: The original, Contiki-based design used only a single buffer
14649 for reassemblying larger packets. This could be a problem issue for
14655 address. This assures that there can be be no corruption of the
14657 - 6LoWPAN PktRadio: Now radio agnostic. All IEEE 802.15.4 dependencies
14660 the representation of radio MAC meta-data, (2) changes to handle
14661 variable-length radio addresses, (3) removal of all explicit IEEE
14664 - ICMPv6: Update so that ICMPv6 can be used with 6LoWPAN.
14665 - IPv6 Neighbor: Update table format to support IEEE 802.15.4 MAC
14667 - PF_IEEE802154 Address Family: Add support for the PF_IEEE802154
14671 MAC-based radios. This address family permits simple access to IEEE
14672 802.15.4 IOCTLs and frame-level network transfers.
14676 - Dynamically configurable USB composite devices: We developed a huge
14680 I've changed the interface for some USB-Functions to receive also the
14682 - Franks' change remained on a branch until all issues were resolved.
14683 the current version in Master is complete and ready for use.
14684 - power: battery_charger: Add ioctl for charging input current. From
14686 - SMPS driver: Add generic upper-half driver for SMPS. From Mateusz
14688 - LED Driver: Add support for inverted LEDS. From Jeff.
14689 - LED Driver: Add lightness correction for RGB LED driver. From Jeff.
14690 - LTC4151 Driver: Add driver for LTC4151 current and voltage monitor.
14692 - Serial TERMIOS: tcdrain() implementation based on a new term ioctl.
14694 - Serial TERMIOS: Add support for TCFLUSH. From Sebastien Lorquet.
14695 - syslog: Add option to use the CLOCK_MONOTONIC for time stamping. From
14697 - HC-SR04 Driver: Add support to HC-SR04 distance sensor. From Alan
14699 - COMP Driver: Add poll support. From Pekka Ervasti.
14700 - BQ2429X Driver: Add driver for TI BQ2429X battery charger. From Juha
14702 - ADC Driver: Add poll support. From Juha Niskanen.
14703 - BCH Driver: Add poll support. From Jussi Kivilinna.
14704 - RTC Driver: Extend the RTC framework with an alarm read ioctl
14711 - sim/ipforward: Add an IP forwarding configuration using TUN devices
14713 - Console: Add non blocking read to devconsole driver. From Simon
14715 - Networking: Poll for TX frames to speed up driver. From Simon Piriou.
14716 - pf_ieee802154: Add configuration for testing PF_IEEE802154 address
14718 - ARM Simulator: Adds necessary functionality to build Simulator under
14724 - SAML21 I2C driver. Developed for and contributed with permissin from
14726 - SAMD/L21 USB Driver: Add a USB driver. Developed for Filament Inc.
14731 - SAMV71-XULT: Add support for the MRF24J40 radio and create a
14732 mrf24j40-starhub configuration.
14733 - SAME70-Xplained: Add MRF24J40 support.
14737 - Kinetis USB Improvements: usbdev clean up ensuring proper use of HW.
14739 and detach functions optional. As they do not make sense for a bus
14741 - Kinetis SPI driver: From David Sidrane.
14742 - Kinetis: I2C driver added I2C3, reference counting and reset.
14745 - Kinetis RTC: Implementation of the alarm read function.
14749 - configs/teensy-3.x USB: Define USBOTG-FS Read from FLASH access in
14750 board config. Allow the board config to define the USBOTG-FS to have
14752 - configs/teensy-3.x: Removed call to khci_usbattach. The call is not
14754 - freedom-k66f: Use SPI driver. Initialize SPI1 on connector J6. No
14759 - LPC43xx: Modify up_allocate_(k)heap() to support PROTECTED mode. From
14764 - configs/Bambino: Add protected mode configuration to Bambino board.
14769 - LC823450: Initial support for ON Semiconductor LC823450. From Masayuki
14771 - LC823450: eMMC/SD and USB support for LC823450. From Masayuki Ishikawa.
14775 - LC823450-XGEVK: LC823450-XGEVK board support. From Masayuki
14777 - LC823450-XGEVK: Add eMMC/SD and USB support. From Masayuki Ishikawa.
14781 - STM32 L4: Add support for the STM32L475 family.
14782 - STM32 L4 RCC: Enable ADC clock source. From Juha Niskanen.
14783 - STM32: Allow clock frequencies > 168 MHz on stm32f427/429. We need
14784 to enable the power overdrive for this case. This change allows the
14786 local register access operations to allow more than 16-bit registers.
14788 - STM32 F4: Add support for STM32F433RC. From Alan Carvalho de Assis.
14789 - STM32 F7: Add new configuration option for enabling flash ART
14794 - STM32 TIM: Add the set counter function for stm32 timers. From
14796 - STM32 HRTIM: Update HRTIM definitions. Add HRTIM driver. From
14798 - STM32 HRTIM: Add HRTIM character driver. From Mateusz Szafoni.
14799 - STM32 HRTIM: Fix DAC triggers configuration, Add missing master timer
14801 - STM32 HRTIM: Add DMA configuration. From Mateusz Szafoni.
14802 - STM32 HRTIM: Add burst mode configuration. From Mateusz Szafoni.
14803 - STM32 RTC: Port Boris Astardzhiev's RTC change for STM32L4 to STM32.
14804 - STM32 DAC: Add support for HRTIM triggering. Separate dma buffer
14805 configuration for channels. From Mateusz Szafoni.
14806 - STM32 DAC: Conditional logic for timer triggering, fix TSEL
14809 - STM32 DAC: Support external triggering for DMA transfer. From Mateusz
14811 - STM32 L1 TIM: Add base address for TIM11. From Juha Niskanen.
14812 - STM32 F4 FLASH: Enable/disable the flash write protection on any
14815 - STM32 F4 Clocking: To use an external oscillator module (not just a
14820 - STM32 F4 USB: I'm working on bringing up USB full-speed support on
14823 config STM32_OTGFS_VBUS_ CONTROL which lets us selectively disable
14825 configgpio call for the ID pin, which is only used in OTG mode which
14828 - STM32 FLASH: Add CONFIG_STM32_STM32F469 support. From David Sidrane.
14829 - STM32 COMP: Add default INM configuration and some missing COMP
14831 - STM32 F33: Add missing SYSCFG CFGR3 definitions. From Mateusz Szafoni.
14832 - STM32 L4 Serial: Allow configuring Rx DMA buffer size. From Juha
14834 - STM32 L4 COMP: Input minus pin extended selection. From Juha Niskanen.
14835 - STM32 L4 COMP: Bind to upper half comp driver. From Pekka Ervasti.
14836 - STM32 L4 DAC: Port from STM32. Add ADC register definitions. From
14838 - STM32 L4 DAC: Add option for routing DAC output to ADC. Actually
14840 - STM32 L4 DAC: Separate DMA buffer configuration for channels. From
14842 - STM32 L4 ADC: Implement peripheral. From Juha Niskanen.
14843 - STM32 F7: Definitions for I2C4, SDMMC2. Adapted RAM start / size to
14845 - STM32 F7 I2C4: I2C4_SDA can also be on GPIO PB7. From Titus von
14847 - STM32 F7 LTDC: Option for DSI output, inconsistency: the stm32f746
14850 - STM32 F7 Clocking: Added functions for DSI clock source selection.
14852 - STM32 F7 Clocking: Enable APB2 DSI clock. From Titus von Boxberg.
14853 - STM32 F7 LTDC: No board specific dithering values used; corrected
14856 - STM32 F7 Reset: Added function for reset. From Titus von Boxberg.
14857 - STM32 F7 DMA: DMA add dcache alignment check in stm32_dmacapable. In
14858 the case dcache write-buffed mode is used (not write-through) buffer
14859 alignment is required for DMA transfers because a)
14864 - STM32 F7 SDMMC: SDMMC remove widebus limitation on DMA. There is no
14865 documentation for the STM32F7 that limits DMA on 1 bit vrs 4 bit
14867 - STM32 F7 SDMMC: SDMMC add dcache alignment check in
14870 - STM32 F7 RTC: Port Boris Astardzhiev's RTC change for STM32L4 to
14875 - STM32F103-Minimum: Add GPIO device driver example. From Alan
14877 - STM32F103-Minimum: Add small hello example for STM32F103-Minimum
14879 - STM32F103-Minimum: Add support for SmartFS on Winbond W25 SPI NOR
14881 - STM32F103-Minimum: (1) Enable CONFIG_MTD_PARTITION in Kconfig if flash
14884 - Nucleo-F334R8: Add HRTIM initialization. From Mateusz Szafoni.
14885 - Nucleo-F334R8: UART2 is default serial port (STLINK Virtual Port).
14887 - Clicker2-STM32: Add a configuration that was used with the MRF24J60
14888 for 6loWPAN testing.
14889 - Clicker2-STM32: Allow both IEEE 802.15.4 MAC character and network
14891 - Clicker2-STM32: Add configurations to support the endpoint and hub
14893 - Clicker2-STM32: Add support for per-function-call stack checking.
14895 - Clicker2-STM32: Configure EDBG SPI CS just to make that it is
14897 - STM32F4 Discovery: Add logic to register the button driver and the
14899 - STM32F4-Discovery: Add a configuration for testing libc++. From Alan
14901 - B-L475E-IOT01A: Add support for the STMicro B-L475E-IOT01A board.
14903 - B-L475E-IOT01A: Add support for the SPSRGF/Spirit1 radio module. Add
14904 a configuration for testing sprit radio.
14905 - B-L475E-IOT01A: Add configurations to support a star topology.
14906 - B-L475E-IOT01A: Add basic support for external Macronix QuadSPI flash
14908 - B-L475E-IOT01A: Enable UDP broadcast test in the spirit-starhub
14910 - STM32F334-DISCO: Add STM32F334-DISCO basic support. From Mateusz
14912 - STM32F746-Disco: Add ADC3 support. From Ivan Ucherdzhiev.
14913 - STM32L476-Disco: Add a knsh configuration that may be used to test
14915 - STM32F769I-DISCO: Initial port to STM32F769I-DISCO. From Titus von
14920 - Move TUN ioctl command to include/nuttx/net/ioctl.h so that it will
14922 - Math Library: Port gamma() and lgamma() from FreeBSD to NuttX. From
14924 - C++: Compilation with recent C++ compiler needs an overloaded delete
14926 operators are only for C++14 and above.
14930 - Initial clang compile. From Goran Mekic.
14931 - Add CLANG definitions in Kconfig and Toolchain.defs.
14932 - drivers/wireless/ieee802154: Moved radios to individual
14933 sub-directories. From Anthony Merlino.
14934 - Makefile.unix: Add savedefconfig target. From Gwenhael Goavec-Merou.
14935 - Add Gwenhael's change to Makefile.win and update README.txt to
14937 - All defconfig files are now in the compressed format created with
14938 'make savedefconfig.' The original .config file can be reconstituted
14940 - Build System: It is no longer necessary to have a unique Make.defs
14941 file for each configuration. A board may share a common Make.defs
14943 common Make.defs file moved to the scripts/ sub-directory for each
14945 - Networking: Move INET socket interface out of net/sockets to its own
14950 - testbuild.sh: Added -x to fail build on errors for continuous
14953 - Improve configure.sh behavior: (1) enable to call from top directory.
14954 (2) enable to designate direct path for config. (3) install .gdbinit
14956 - Update tools/configure.c to same functionality as configure.sh. Add
14958 optional file but other things like IDE-specific project files might
14960 - tools/configure.sh will now copy Eclipse project files if they are
14962 - Update configure.sh, configure.bat, configure.c: With compressed
14967 - tools/refresh.sh: Now runs make savedefconfig before copying the new
14968 defconfig file in place; Also, added a new option --defaults. Since
14971 --silent but still prompts you for the decision to save or discard the
14973 - tools/refresh.sh: Update so that it can find the Make.defs file in
14978 - NSH Library: Add a Telnetd command. This is needed when network
14981 was added just for that case: So that the telnet daemon can be
14983 - NSH Library: Misc changes needed for PktRadio support.
14984 - NSH Library: Extend ifconfig command so that it can set variable
14986 - NSH Library: Update addroute and delroute command. The would support either
14987 IPv4 or IPv6, but not both. Allow expression of the netmask in IPv4 CIDR or
14989 especially for IPv6.
14990 - NSH Library: Add a route command that will dump the content of routing table.
14994 - examples/udp: Add configurable network device name; Add option to
14996 or for 6LoWPAN.
14997 - examples/udp: Fix registration as a built-in program; Change some
14998 naming to make room for a second target. Current one endpoint is the
15003 - examples/udp: Port numbers need to be configurable to work with
15007 - examples/udp: Enable testing with the broadcast address.
15008 - examples/nettest: Support target boards on both ends of the test.
15012 target. Add support for both endpoints on target boards vs. one on a
15014 - examples/nettest: The send buffer size is now a configuration option.
15015 - examples/nettest: Loopback option should be available in Kconfig for
15017 - examples/keypadtest: REMOVED and warehoused in the Obsoleted
15018 repository. This was just a bad clone of apps/examples/hidkbd for a
15020 function calls into the OS. So it has no purpose: It is redundant, it
15021 uses illegal interfaces, and is a test for non-existent code.
15022 - examples/ipforward: Add an IP forwarding example using only TUN
15024 - Implement powermonitor example for ltc4151 current and voltage
15026 - examples/pf_ieee802154: Add for testing PF_IEEE802154 sockets. Add
15028 no counterpart to INADDR_ANY for these radios (not now at least).
15029 - examples/dac: Add DAC example. From Juha Niskanen.
15033 - netutils/telnetc: This a port of libtelnet to NuttX.
15034 - netutils/telnetd and users of telnetd: Add support for IPv6.
15035 - netutils/thttpd: Remove the netstats demo. This depends on an
15038 for NSH which had the same issue. But I am too lazy to implement that.
15039 - netutils/netlib: Add support for PktRadio IOCTL commands.
15040 - netutils/netlib: Add a helper to decode short addresses.
15044 - wireless/ieee802154/i8sak: Rewrote i8sak to be test CLI for IEEE
15046 - wireless/ieee802154/i8sak: Updates to i8sak for
15047 association/beacon-enabled changes to IEEE 802.15.4. From Anthony
15049 - wireless/ieee802154/i8sak: Add option to make it easy to send large
15050 frame for testing purposes. From Anthony Merlino.
15051 - wireless/ieee802154/i8sak: Add scan command. From Anthony Merlino.
15052 - wireless/ieee802154/i8sak: Add coordinfo command allowing you to
15055 - wireless/ieee802154/i8sak: Add a option to retry on failures to the
15057 - iwireless/ieee802154/8sak: Add reset command to reset the MAC layer.
15058 Adds option to assoc command -t to specify how long to wait for a
15060 - ieee802154/i8sak: Adds command to trigger regdump of radio. From
15065 - apps/system/composite: Update to apps/system/composite associated with
15067 - apps/system/composite: Remove CDC/ACM and MSC configuration logic.
15071 configuration settings that are no longer used. Fix configuration
15074 - apps/system/composite: Add a configuration option to the boardctl()
15076 - apps/system/composite: Remove references to USBMSC. There still
15078 - apps/system/telnet: Add Telnet Chat daemon and client from
15081 * Platform-Specific Support (apps/platform)
15084 ChangeLog for the complete list of bugfixes and for additional, more
15089 - Fix ELF loader up_checkarch on ARM arch. From Cristian Condurache.
15090 - pthread_mutex_unlock(): Missing check for the case where
15093 the fix for a problem noted by initialkjc@yahoo.com.
15094 - sig_timedwait(): Pending signal structure used after it has been
15096 - mm_mallinfo: do heap end debug assert check with heap semaphore held.
15098 - sched/: Fix return value in sched_setaffinity(). From Masayuki
15100 - Work Queues: work_queue() must cancel existing work prior to queuing
15103 - waitpid(): Corrects two problems when CONFIG_SCHED_HAVE_PARENT +
15105 waited for task had already exited, and (2) was not freeing resources
15110 - VFS poll(): Fix timeout calculation. From Jim Paris.
15111 - VFS poll(): Fix poll for regular files and block devices. Open Group
15113 that 'Regular files shall always poll TRUE for reading and writing'.
15115 - VFS epoll(): Fix epoll_wait function. From Simon Piriou.
15116 - Smart FS: Fix wrong freeing of device structure and use-after-free
15118 - MTD FLASH drivers: The byte write method of several drivers had a
15121 - MTD M2PX: If we READ while a write/erase is pending, the command is
15124 the command. So READ MUST wait for write completion, and before that,
15127 - MTD FLASH drivers: Clone Sebastien Lorquet's m25px change to at25,
15129 - MTD W25: Add missing locking and fix SPI_SELECT usage for
15131 - MTD W25: Wait for BUSY flag to clear in w25_readid and
15134 BUSY flag in status register is '1'. Therefore wait for busy flag to
15136 - Automounter: FS_AUTOMOUNTER should depend on SCHED_LPWORK. From
15141 - TCP Listen: Throw error when error happens in the tcp_listen
15143 - Network Device Management: Do not search net device when all-zeros
15145 - Network Device Management: Fix a error in netdev_register(); it was
15147 - Network Device Management: Fix netdev_dev_lladdrsize(). In some
15148 configurations, it could return the wrong size for the address of a
15150 - Network Device Management: Fix typo for 802.11 devices in
15153 - TUN Driver: Use critical section instead of semaphore in
15155 - TUN Driver: Do all polling on worker thread. Otherwise, the stack
15157 - TUN Driver: Currently cannot support TAP mode unless Ethenet is
15159 - netdb: Fixed buffer size used for sending DNS queries should depend
15161 - UDP networking: The TTL (time to live) was not being set in the IPv4
15163 - UDP Networking: Fix a copy-paste error that could effect networking
15164 when both IPv4 and IPv6 are enabled.
15165 - UDP Networking: When upd_input() cannot process a packet, it returns
15170 - TCP Networking: Correct some issues that prevent TCP from working
15171 correctly when both IPv4 and IPv6 are enabled.
15172 - TCP Networking: TCP disconnection callbacks are not retained in a
15173 list. This will support multiple callbacks per lower-level TCP
15174 connection structure. That is necessary for the cae where a socket is
15175 dup'ed and shares the same lower-level connection structure. NOTE:
15178 - TCP Networking: Start the network monitor for a socket when a TCP
15180 - TCP Networking: If one of the dup'ed socket's is closed, then network
15183 closed on another, any threads waiting for events from the socket
15186 - TCP Networking: Fix a race condition. The accept() operation is
15189 occur and the socket may no longer be connected when it is marked so.
15191 - Network routing tables: Fix a compilation error when IPv6 and
15193 - Network procfs: Fix some spacing when both IPv6 and IPv4 are enabled.
15194 - Network Local Sockets: Fix accept for local stream sockets. From
15196 - Network Local Sockets: Fix server lc_waitsem overflow. From Jussi
15198 - IPv6 Networking: Remove comparisons to the address with all ones
15201 - ICMPv6 Networking: Fix a compilation issue with
15203 - Networking: Fix net_lock returning ERROR when instead of real error
15205 - IGMPv2 Networking: Remove special support for interrupt level
15207 many files, correct comments. There is no interrupt level processing
15212 - IEEE 802.15.4 MAC: Need counting protection on the logic that
15215 - IEEE 802.15.4 MAC: Improves internal timer logic to handle work
15222 - IEEE 802.15.4 Network Driver: Update RX statistics in network driver.
15223 - IEEE 802.15.4 MRF24J40 Driver: Minor timing fix. Matches recommended
15225 easier to navigate. Fixes issue with non-beacon enabled mode. From
15227 - IEEE 802.15.4 MRF24J40 Driver: Fix a bug causing radio to cease
15229 - IEEE 802.15.4 MRF24J40 Driver: Fixes issues with sleeping for beacon
15231 - EEE 802.15.4 MRF24J40 Driver: Fix math error for calculating sleep
15233 - IEEE 802.15.4: Fix timing issues for beacon enabled coordinators and
15235 - iIEEE 802.15.4: Fix issue with association on beacon-enabled
15237 - 6LoWPAN: Correct a few addressing issues. Also reserve two bytes at
15238 the end of the frame for the FCS.
15239 - 6LoWPAN: Fixes needed when extended addressing is enabled; broke short
15244 - 6LoWPAN: Add missing IPv6 address creation to HC1 decode logic. Fix a
15246 - 6LoWPAN: TCP logic was not obeying MTU packet size limitations.
15247 - 6LoWPAN: Major re-architecting of TCP logic to properly handle TCP
15250 - 6LoWPAN: HC06, copy TCP header as though it were data. TCP packet
15252 - 6LoWPAN: Fix duplicate and bad memcpy in loopback driver.
15253 - 6LoWPAN: Fix a misconception about HC06 16-bit IPv6 address
15255 - 6LoWPAN: TCP send logic was returning a failure in one case when, in
15260 - USB MSC: Use struct instead of pointer to the struct as sizeof
15264 - USB MSC: Add missing logic to define endpoints. The composite
15265 …changes broke the the non-composite, USB MSC only case because it omitted the critical setup when …
15266 - USB CDC/ACM. Fix several known problems resulting from merge of USB
15267 composite device. That merge now breaks some of the non-composite USB
15269 - Button Driver: Interrupts weren't enabled since nothing updates them
15272 - ADC Driver: Fix some data alignment issues in the ADC driver.
15273 - I2C Drivers: Handle I2C_TRANSFER return value consistently. Some I2C
15277 - COMP Driver: Fix compilation errors when poll disabled. From Mateusz
15282 - Simulation: Fix mkdir issue in GNU target. From Simon Piriou.
15283 - Simulation: x86 stack needs to be aligned to 16-byte boundaries.
15284 - Simulation: Fix building 32-bit simulation on 32-bit X86. From Jussi
15289 - ARM: The older ARM7 and ARM9 configurations were determining CFLAGS
15290 based on the GCC version 4.x.x or not. That needx to be extended for
15293 * ARMv7-M:
15295 - Fixed ARMv7-M Toolchain setting. Cortex-M4 only have Single
15297 - ARMv7-M syscall logic: Clear bit 0 in PC settings. Bit 0 is the
15304 - Fix ESP32 gpio enable reg and default UART pin. Modify default UART
15305 pin for ESP-WROOM-32. Fix gpio enable reg. From Sungki Kim.
15309 - SAMD21: Fix some SPI-related issues. From Matt Thompson.
15310 - SAMD21 SPI: I was having issues with the bus freezing up .. slaves
15313 using the RXNACK flag in the STATUS register, which indicates that no
15317 - SAMD/L21: Need to preserve errno value across syslog() call.
15318 - SAMD21: Changes needed to get USB working. From Matt Thompson.
15322 - SAMv7 TWIHS: TWIHS driver add reference counting. From David Sidrane.
15323 - SAMv7 CAN: We discovered a problem with the samv7 mcan driver which
15331 feature for acknowledging error messages. The error messages can't be
15340 - SAMv7 CAN: I discovered while working on the SAMV7 mcan driver that
15349 - SAMv71-XULT: Fix MRF24J40 interrupt GPIO number.
15353 - Kinetis MPU: Disable MPU when not in protected mode. The hardware
15358 - Kinetis MPU: Fixed warning for kinetis_mpudisable. Missing header
15360 - Kinetis SIM: Ensure isolation of clock dividers for 0 value case.
15362 passes a 0 for the init value. This prevents overflow of the 0
15363 decremented to -1 (0xffffffff) spilling over to other clockdivN
15368 - i.MX6: Fix a wrong parameter passed when calling irq_attach() in
15370 - Based on Masayuki's change, I review all serial driver vector
15376 - STM32 F410 Kconfig: Fix peripherals available on the STM32 F410.
15377 This also adds a select for STM32_HAVE_DAC1 present on this STM32
15378 flavor. From Gwenhael Goavec-Merou.
15379 - STM32 L4 DMA: Correct USART3_RX bad channel definition. From Juha
15381 - STM32 L4 PWR: Correct PWR_SR2 REGLPS and REGLPF bits, add port I
15384 - STM32 F7: do not enable read-modify-write on DTCM. "AN 4667 - STM32F7
15386 read-modify-write on DTCM: "If the DTCM-RAM is used as data location
15388 no ECC management in this RAM on the STM32F7 Series, it is recommended
15389 to disable the read-modify-write of the DTCM-RAM in the DTCM interface
15395 - STM32 TIM3/4 are always 16-bits; never 32-bits. Noted by Eetu
15397 - STM32 ADC: Invalidate dma buffer before use. Missing invalidation
15399 - STM32, STM32L4, STM32F7 ADC: Fix channel 18 sample time. From Juha
15401 - STM32 DAC: Fix some configuration logic. When STM32_NDAC is greater
15403 - STM32 DAC: Fix compilation when DMA disabled for channel. From
15405 - STM32 F0: Fix some funny shifts in DAC header files. From Juha
15407 - STM32 F1 RTC fixes: (1) Compile issues because of missing RTC_MAGIC
15414 - STM32/STM32 L4 PWM: While attempting to output a 70 MHz square wave
15418 generating slow PWM but for frequencies close to the PCLK, the
15420 - STM32 L4 I2C: Set I2C SDA and SCL pins to open drain mode. From Pekka
15422 - STM32 L4 I2C: I2C4 was writing to wrong RCC registers. From Juha
15424 - STM32 L4 DAC: Report transfer as completed in DMA callback. Without
15427 - STM32 L4 COMP: comparators share RCC enable bit with SYSCFG. From
15429 - STM32 L4 ADC: Correct EXTSEL macros. From Juha Niskanen.
15430 - STM32 L4 TIM: TIM15,16,17 are always in APB2. From Juha Niskanen.
15431 - STM32 F7 I2C: Set I2C4 SDA and SCL pins to open drain mode. From Juha
15433 - STM32 F4 RTCC: ISR register and write protection fix. From Eetu
15435 - STM32 F7 Ethernet: Fix typo in header; Add memory sync barrier
15438 poll cycle instead. Nucleo-144: Fix RMII TXD1 signal, connected to
15440 - STM32 F7: Added missing config option for register value debugging.
15442 - STM32 F7: No FSMC, only FMC for STM32F7. From Titus von Boxberg.
15443 - STM32 F7: HEAP2 depends on CONFIG_ARCH_HAVE_HEAP2, not on particular
15445 - STM32 F7: STM32_RCC_DCKCFGR2 has nothing to do with PLLI2S; PLLI2S is
15448 - STM32F7: Some STM32F7 builds failed in build testing due to undefined
15451 - STM32 F7: dcache write-buffed mode is used (not write-through) buffer
15452 alignment is required for DMA transfers because a)
15460 - STM32F103-Minumum SPI: SPIDEV_WIRELESS used when this has
15462 - configs/: a few more places where SPIDEV_WIRELELSS should be
15464 - STM32F103-Minumum: Fix a BUG when reading from output pin. We need
15467 - STM32F103-Minumum: Use separated read_ops for GPIO interrupt pins.
15469 - STM32F103-Minumum: Fix compiler error in MCP2415 logic.
15470 - STM32F746G-DISCO: Fix for compilation of STM32F746G-DISCO. From Ivan
15472 - STM32F746G-DISCO: Fix for stm32f746g-disco board for button support
15479 - Fix -Werror=implicit-fallthrough on gcc7. From Julien Lecoeur.
15480 - configs/Board.mk: Remove comment form end of line. In windows native
15483 - configs/Board.mk: Remove quotes from CONFIG_ARCH_FAMILY. Causes
15485 - Makefile.win would only create uboot images for ARM. MIPS support
15490 - C++: Fix C++ __guard implementation for ARM. The standard C++ ABI
15493 32-bit ARM C++ ABI defines it as 32 bits instead, and changes the
15498 by special-casing 32-bit ARM in libxx_cxa_guard. From Jim Paris.
15499 - C++: In cwchar it uses CONFIG_LIBC_WCHAR to only export the wc/mb
15505 - C Library: Fix an error in mkstemp() the could result in an infinite
15507 - C Library: (1) Fix an error in mkstemp() the could result in an
15508 infinite loop. (2) Fix for wrong output in some cases. For Example:
15509 (a) input: "FILEXX", output: "FILE00" and repeats same output for
15512 for next invocation "FILE200000" and so on. But it's good, if the
15515 - C Library: gethostbyname_r: Fix check for space in buffer.
15516 - C Library: inet_ntop() was printing negative values for fields >127.
15517 - Math Library: Fix wrong output in modf() API. The sign of integral
15518 part given by the modf() should be same as sign of input. But for
15521 - Math Library: Fix wrong output in ceil() API. Ex:for input x = 1.0,
15526 - tools/testbuild.sh: Fix missing $ before variable name.
15527 - tools/mkdeps.c: Eliminate a warning. MAX_PATH may already be defined
15532 - All apps/ Makefiles: Add .PRECIOUS: apps/libapps.a to every
15533 Makefile. Hopefully this will end awkward problems when you Control-C
15535 - platform/Makefile: More attempts to fix for Windows native build.
15540 - NSH network initialization: Fix some ieee 802.15.4 initialization
15542 hard-coded but must come from the coordinator. Re-factor a function
15544 for 6loWPAN. The 6loWPAN stack uses IP address that derive from the
15546 - NSH Library: Fix copy-paste typo in nsh_usbconsole.c. From Oleg
15548 - NSH Library: fix size of 6LoWPAN extended address.
15549 - NSH Library: Fix build break in nsh_command.c with IPv4/IPv6 dual
15551 - NSH Library: Correct parsing of ifconfig so that you can specify the
15556 - examples/smart: Fix some compilation errors. Obviously this test has
15558 - examples/udp: Renaming some files to prevent name collision in
15560 - examples/nettest: Renaming some files to prevent name collision in
15562 - examples/nximage: Remove unused global variable.
15563 - examples/nsh: Remove APPNAME, PRIORITY, and STACKSIZE settings from
15568 - netutils/tftpc: Missing header file causes errors in some
15570 - netutils/tftpc: TFTPC depends on CONFIG_NET_IPv4.
15571 - netutils/netlib: Fixes to work when only USRSOCK is enabled.
15572 - netutils/netlib: Fix netlib_nodaddrconv() so that its return type is
15574 - netutils/netlib: If only PF_IEEE802154 socket family is enabled, then
15576 - netutils/ftpc: Fix some memory leaks. From Boris Astardzhiev.
15577 - netutils/thttpd: Fix a malformed if condition detected by GCC 6.x.x.
15578 - netutils/dhcpd: Prevent buffer overflow in dhcpd_addoption. offset
15585 - wireless/ieee802154/i8sak: Need to increment the next_saddr after
15590 - correct copy-paste typo in comments in composite_main.c From Oleg
15592 - system/dhcpc: The DHCPC renew command did not build correctly due to
15594 - system/dhcpc: Fix warning about renew_main.o appear twice in rule.
15598 - tools/mkkconfig.bat: Use %cd% instead of %~dp0 for usage of APPSDIR
15600 - tools/mkkconfig.bat: Remove quotes in echo. These were begin
15602 - Windows build fixes: tools/mkkconfig.bat - switch APPSDIR path to
15603 use forward slashes for kconfig-frontends. interpreters/ficl -
15607 NuttX-7.23 Release Notes
15608 ------------------------
15611 and is available for download from the Bitbucket.org website. Note
15612 that release consists of two tarballs: nuttx-7.23.tar.gz and
15613 apps-7.23.tar.gz. These are available from:
15618 Both may be needed (see the top-level nuttx/README.txt file for build
15625 - sem_open() should return SEM_FAILED on any failures. This is change
15628 - exec(): The non-standard interface exec() is now enshrined as a
15632 generate their own symbol tables for linking. Other file execution
15634 mode, the OS cannot provide any meaning symbol table for execution
15635 of code in the user-space blob so that is they exec() is really
15639 provide any meaning symbolic information for use in linking a
15641 - OS Internal Functions: Rename many OS internal functions so it is
15645 - Cancellation Points: Add new cancellation point interface,
15647 - Signals: Add logic to wake up a thread that is waiting on a signal
15649 - sigtimedwait(): Add logic to suppress the wait if there is a
15651 - clock_nanosleep(): Implement clock_nanosleep(). nanosleep() is now
15653 - task_delete(): Do not permit user applications to delete kernel
15655 - kthread_create(): Rename kernel_thread() to kthread_create() for
15657 - boardctl(): Remove the BOARDIOC_GRAPHICS_SETUP command.
15658 - TCB: Move POSIX thread specific data from pthread TCB to common TCB
15661 pthread data with config option CONFIG_DISABLE_PTHREAD=y. From Jussi
15663 - mm: Remove the CONFIG_GRAN_SINGLE configuration option. It adds no
15667 - mm: Add a function to get information about the state of the
15672 - MT25Q Serial FLASH: Add support for Micron MT25Q series MT25Q128.
15674 - MX35LFxGE4AB: Add an MTD driver for Macronix MX35LFxGE4AB serial
15676 - FileMTD: Add block device MTD interface. Block MTD interface
15678 file-system in between. NOTE that this provides the opposite
15681 - BCH: The character driver to block device access now supports an
15683 - mkfatfs: Remove mkfatfs from the OS. This is a user-space
15685 - procfs: Implements procfs /proc/fs/blocks and /proc/fs/usage files,
15687 file, replacing the NSH mount command when there are no arguments.
15688 - procfs: Add /proc/meminfo. This is an alternative way to get the
15692 the same information with no such violation. it also provides
15695 for the page table usage in the KERNEL build.
15696 - UserFS: Adds the UserFS client and of the UserFS feature in
15702 operations on the top level pseudo-file system inode tree. That
15711 - Framebuffer character driver: Add framebuffer character device driver.
15712 - LCD Framebuffer: Add support for a generic front-end that will
15714 - Framebuffer character driver: Include support for LCD drivers that
15717 - LCD: Make LCD driver configuration independently selected from NX
15724 - Networking: Add implementation of logic for SIOCGIFCONF and
15726 - Network IOCTLs: Add support for the SIOCGIFBRDADDR ioctl() command.
15727 - Routing Tables: Permit IPv4 and IPv6 routing tables to be of
15729 - Routing Tables: Adds support for read-only routing tables. Prior
15733 pre-initialized, read-only routing table provided by the
15734 board-specific logic.
15735 This would be particularly useful, for example, in the case where
15737 packets to go to the single adaptor in all cases. So for that
15738 behavior you could add a read-only routing table to the
15739 board-specific long that contains a single entry, the default route:
15741 - Routing Tables. Added support for routing tables in files in a file
15742 system. This might be useful for customized, per-unit routing
15745 think it probably should have a small, in-memory cache of most
15746 frequently used routes for good problem.
15755 - Routing Tables: Add support for an in-memory routing table cache in
15758 and so can eliminate some file access. Flush the in-memory cache
15762 - Routing Tables: Add logic to mark a route as most-recently-used in
15764 - ICMP: This change adds support for semi-standard IPPROTO_ICMP
15767 - ICMPV6: This commit adds support for semi-standard IPPROTO_ICMP6
15768 sockets. This is a replacement for the non-standard ICMPv6 ping
15770 - ICMPv6: Add option to manually specify router prefix in router
15772 - Local Sockets: This commit modifies the Unix domain local socket
15786 - IEEE-802154: Adds support for receiving MAC events via IOCTL through
15788 - IEEE-802154: Simplifies notify() and rxframe() calls to a single
15791 - MAC802154: Add support for getting promiscuous mode state From
15793 - MAC802154 Character Driver: When in promiscuous mode, the char
15795 change adds an offset field indicating the header-payload boundary.
15798 - 6LoWPAN: Remove CONFIG_NET_6LOWPAN_FRAMELEN. In this case where
15801 - 6LoWPAN: Support sending to a router that is on-link and may be
15802 able to forward the packet for us if the destination is not
15804 - XBee: Adds XBee S2C (802.15.4 firmware) support. XBee driver
15809 - PowerLED: Add upper-half driver for high power LED driver (powerled)
15811 - RTC Driver: Add periodic alarms to upper and lower halves. From
15813 - Pipes: Fix writing large buffers not triggering POLLIN for reader
15815 - USB CDC/ACM Device: Add support for RX flow control to the CDC/ACM
15817 - USB CDC/ACM Device: Add support for flow control TERMIOs in CDC/ACM
15819 - USB RNDIS Device: Add RNDIS-over-USB driver. From Sakari Kapanen
15820 with added Hi-Speed support from Masayuki Ishikawa.
15821 - Loop Driver: Don't use file descriptors... Use the internal file
15824 - APA102 LED controller: Add driver for APA102 LED controller. These
15826 - INA219. Add INA219 Driver. The INA219 is a combined voltage and
15834 - PCA9555: The IRQ subsystem now supports passing a void * parameter
15837 handler. Now the CONFIG_ for multiple PCA devices just allocates
15843 - APDS-9960: Add driver for the APDS-9960 gesture sensor. From Alan
15845 - MAX7219: Add support to MAX7219 LED Matrix as LCD interface. From
15847 - WM8774: Add WM8774 audio DAC support. From Masayuki Ishikawa.
15848 - Nunchuck: Add Nintendo Wii Nunchuck driver. From Alan Carvalho de
15853 - Simulation: Add a configuration for non-graphical testing of the
15855 - Simulation: Add a configuration for testing the UserFS using
15860 - BCM2708: Add enough infrastructrue (more stubs) to get a clean
15864 logic, boot-up files, GPIO support, tickless timer, build and
15869 - Raspberry Pi Zero. Basic board support at configs/pizero. Untested
15874 - XMC4500-Relax: Add config for UART3 on RXD P0.0 and TXD P0.1 pins.
15879 - Open1788: Add initialization of Framebuffer driver. Add
15880 configuration for testing the framebuffer driver.
15884 - LPC43xx: Add LPC43xx CAN driver. From Alexander Vasiljev.
15888 - MCB1700: Add support for Keil MCB1700 board. From Alan Carvalho de
15890 - Open1788: Add support for the discrete joystick driver.
15891 - Open1788: Add a configuration for testing pdcurses with discrete
15896 - LC823450: Add ADC driver and watchdog drivers. From Masayuki
15898 - LC823450: Add IPL2 support. From Masayuki Ishikawa.
15899 - LC823450: Add I2S support. From Masayuki Ishikawa.
15900 - LC823450: Add auto LED for CPU activity. From Masayuki Ishikawa.
15904 - LC823450-XGEVK: Enable ADC and watchdog driver. From Masayuki
15906 - LC823450-XGEVK: Add IPL2 support. From Masayuki Ishikawa.
15907 - LC823450-XGEVK: Add WM8774 support. From Masayuki Ishikawa.
15908 - LC823450-XGEVK: Add auto LED support. From Masayuki Ishikawa.
15909 - LC823450-XGEVK: Enable CONFIG_SMP for audio. From Masayuki Ishikawa.
15910 - LC823450-XGEVK: Add rndis configuration. From Masayuki Ishikawa.
15914 - ARM Kconfig: Add support for classic ARM11 architecture selections.
15915 - STM32 Tickless: Removes the restriction to 16-bit counts when a
15916 32-bit timer is used for tickless operation on the stm32. As it
15920 - STM32 L4 Kconfig: Add some L486 and L496 chips. From Juha Niskanen
15921 - STM32 F7: Adds architecture support for the STM32 F72x and F73x
15923 - STM32 F7: Allow changing voltage output scaling setting and
15924 prevents enabling over-drive mode for low frequencies (STM32 F74xx,
15925 75xx, 76xx, 77xx). From Jussi Kivilinna. Changes replicated for
15930 - STM32 ADC: Added support for ADC's IO_ENABLE_TEMPER_VOLT_CH ioctl
15932 - STM32 Wakeup: Add logic for enabling wakeup pins. From Oleg Evseev.
15933 - STM32 PWR: Adds stm32_pwr_getsbf and stm32_pwr_getwuf functions
15936 - STM32 HRTIM: Sdd support for capture, chopper, deadtime and dump
15938 - STM32 RTC: Canceling an alarm marks it as inactive. From Juha
15940 - STM32 Serial: Add interface to get uart_dev_t by USART number,
15942 - STM32 F33xx ADC: Initial ADC support for the STM32F33XX. From
15944 - STM32 F33xx ADC: Add ADC DMA support to STM32F33 configuration. From
15946 - STM32 L4 ADC: Port analog watchdog ioctl commands from the Motorola
15948 - STM32 L4 ADC: Add option for routing ADC data to DFSDM, fix DFSDM
15950 - STM32 L4 ADC: Add PM hooks from Motorola MDK
15951 - STM32 L4 FLASH: Add function for modifying device option bytes,
15953 - STM32 L4 DFSDM: Add peripheral support for digital filters for
15954 sigma-delta ADCs. Initial version. Timer trigger support is not
15956 - STM32 L4 I2C: Port then STM32 F7 I2C driver to STM32 L4. STM32L4 I2C
15957 driver is in work-in-progress state (plentiful of TODOs and
15958 #warnings) and lags many features found in more up-to-date STM32 I2C
15960 for L4's 'wakeup from stop mode' flag and STM32F7's I2C driver is in
15964 add configuration option for choosing I2C clock source instead of
15965 current hard-coded default. From Jussi Kivilinna.
15966 - STM32 L4 RTC: Add up_rtc_getdatetime_with_subseconds
15967 - STM32 L4 RTC: Change maximum alarm time from 24h to one month. From
15969 - STM32 L4 RTC: Add support for periodic interrupts with
15971 - STM32 L4 SDMMC: Add support for an SDMMC driver. From Miha Vrhovnik.
15972 - STM32 L4 Serial: Suspend serial for Stop mode. From Juha Niskanen.
15973 - STM32 L4 Serial/PM: STM32L4 serial PM interface improvements:
15974 Check rx/tx buffers for pending data in pmprepare. Remove adhoc PM
15980 - STM32F103-Minimum: Add board support for APA102 driver. From Alan
15982 - STM32F103-Minimum: Add ADC support on stm32f103-minimum board.
15984 - STM32F103-Minimum: Add support for LM75 in the stm32f103-minimum
15986 - STM32F103-Minimum: Add an ADPS-9960 example configuration. From
15988 - STM32F103-Minimum: Add board support for MAX7219 LED Matrix
15990 - STM32F103-Minimum: Add USB MSC device initialization to
15991 stm32f103-minimum. From Alan Carvalho de Assis.
15992 - STM32F103-Minimum: Add framebuffer driver initialization for
15993 stm32f103-minimum board. From Alan Carvalho de Assis.
15994 - STM32F103-Minimum: Add Nunchuck board support for
15995 stm32f103-minimum board. From Alan Carvalho de Assis.
15996 - STM32F4 Discovery: Add support for JLX12864G display on STM32F4
15998 - Viewtool-STM32F107: Add support to auto-mount the procfs file system.
15999 - Photon: Support SPI1 and SPI3. From Anthony Merlino.
16000 - STM32F334-DISCO: Add lower half driver for high power LED
16002 - STM32F334-DISCO: Add flash mode support for powerled driver. From
16004 - STM32F334-DISCO: Add powerled example configuration. From Mateusz
16006 - STM32F334-DISCO: Add lower-half driver for SMPS (buck-boost onboard
16008 - Nucleo-F334R8: Add logic for zero latency high priority interrupts
16010 - Nucleo-F334R8: Add highpri example configuration. From Mateusz
16012 - STM32 F4 Discovery: Added support for the LIS3DSH accelerometer on
16014 - STM32 F4 Discovery: ROMFS for STM32F4 Discovery board. From Tomasz
16016 - STM32 F4 Discovery: Add a USB MSC configuration. From Alan Carvalho
16018 - STM32 F4 Discovery: RNDIS support on STM32F4Discovery + DM-STF4BB.
16019 NOTE: MAC address for the host side starts 0xaa. This assignment
16021 - STM32 F4 Discovery: Add STM32F4 Discovery board support for
16023 - STM3240G-EVAL: Add a configuration for testing the Framebuffer
16025 - STM3240G-EVAL: Mount procfs if enabled.
16026 - STM3240G-EVAL: Add support for pdcurses and the pdcurses demo
16028 - Clicker2-STM32: Adds SD card, automount, and syslog file
16030 - Clicker2-STM32: Adds support for USB RNDIS device. From Anthony
16032 - Olimex STM32-H407: Add serial support on the on-board UEXT
16033 connector. Add USART6 for UEXT connector. Add nsh_uext
16035 - Nucleo-F410RB: Add support for the nucleo-F410RB board. From
16036 Gwenhael Goavec-Merou.
16037 - STM32F429i-DISCO: Add framebuffer driver initialization. Add a
16039 - STM32F429i-DISCO: Add logic to auto-mount procfs. Enable procfs in
16041 - STM32F429i-DISCO: Enable support for the STMPE811 touchscreen
16044 - STM32F429i-DISCO: Convert NxWM configuration to use LTDC
16047 - STM32L476-MDK: Add support for the on-board LEDs.
16048 - Nucleo-L496ZG: Add DFSDM initialization. From Juha Niskanen
16049 - Nucleo-L496ZG: Add support for SDMMC driver. From Miha Vrhovnik.
16050 - Nucleo-L496ZG: Enable I2C4 bus with i2ctool in NSH configuration.
16052 - Nucleo-L496ZG: Make HSE on Nucleo-L496ZG default to enable USB.
16054 - Nucleo-F746ZG: Use the serial console over /dev/ttyACM0 by default.
16055 The Nucleo-F746ZG doesn't come with Arduio RS-232 shield, then it is
16059 - Nucleo-144: Adds support for the Nucleo-144 boards with
16064 - z80/include: compiler.h, limits.h, types.h: Update SDCC/z80 files
16065 to include support for long long, inline, __FILE__, and __func__.
16069 - include/: Add stdnoreturn.h. Holds definitions for the C11
16071 - include/netinet/tcp.h: Add trivial standard tcp.h header file.
16072 - libc: Add support for readv() and writev().
16073 - libc: Adds tcflow().
16074 - libc: Add support for sigwait().
16075 - libnx: Changes to allow the font subsystem to be built without
16078 setting for NXFONTs if it can be configured and built independently
16083 - tools/configure.sh: Add special support so that you can start with a
16086 - tools/configure.c: Duplicate new functionaity added to configure.sh.
16087 - tools/configure.sh: This commit adds a -m option for macOS. For
16091 - tools/configure.c: Update functionality to match last change to
16096 - apps/nshlib: mount command no long uses the non-standard OS
16098 when there are no arguments to the mount command.
16099 - apps/nshlib: df command no long uses the non-standard OS interface
16102 - apps/nshlib: The free commands no longer used mallinfo() to get
16114 - apps/examples/fb: Add a simple test for the framebuffer character
16116 - apps/examples/ostest: sem_open() now returns SEM_FAILED in the
16118 - examples/ostest: Extend cancellation test to make sure that
16121 - Added a simple reader example for the LIS3DSH acceleration sensor
16123 - apps/examples/apa102: Add a Rainbow example for APA102 LED Strip.
16125 - apps/examples/flowc: Add a simple test of serial hardware flow
16127 - Add powerled driver example. From Mateusz Szafoni.
16128 - apps/examples/ina219: A simple infinite loop that polls the INA219
16130 - apps/examples/alarm: Add options for reading alarm value and
16132 - Add -n samples to lm75 app and replace Centigrade with Celsius.
16134 - apps/examples/adps9960: Add ADPS-9960 example. From Alan Carvalho
16136 - apps/examples/obd2: Add OBD2 example application. From Alan
16138 - apps/examples/userfs: Add a test case for verifying UserFS.
16139 - apps/examples/smps: Add SMPS driver example. From Mateusz Szafoni.
16140 - apps/examples/pdcurses: Bring in pdcurses demos and make them
16142 - apps/examples/pdcurses: Add a very simple example that just shows
16143 the entire character set (7-bit only). It adapts to the size of
16146 - apps/examples/nunchuck: Add Nunchuck example application. From
16151 - apps/fsutils/mkfatfs: Move mkfatfs from the OS to here.
16155 - apps/netutils/netlib: Add netlib_ipv6adaptor() and
16157 - apps/netutils/netlib: Add helpers for reading the routing table:
16159 - apps/netutils/netlib: Add new utilities netlib_ipv[4|6]router()
16163 - apps/netutils/ftpc: Adds support for IPv6 and fixes various
16168 - apps/canutils/libobd2: Add libobd2 for NuttX. From Alan Carvalho
16173 - graphics/traveler: Convert to use the framebuffer driver.
16174 - apps/graphics/pdcurs34: This commit brings the public domain
16181 - apps/wireless/ieee802154/i8sak: Adds socket interface support. You
16184 - apps/wireless/ieee802154/i8sak: Adds sniffer port option and a few
16186 - apps/wireless/ieee802154/i8sak: Changes 'notif' to 'primitive'
16188 - apps/wireless/ieee802154/i8sak: Channel setting is now saved
16192 - apps/wireless/ieee802154/i8sak: Adds ability to get/set rxonidle
16193 setting for MAC layer. From Anthony Merlino.
16194 - apps/wireless/ieee802154/i8shark: Adds i8shark, a sniffer "adapter"
16201 - apps/system/ping and ping6: This commit removes the ping and ping6
16203 apps/system/ping6 built-in commands. The NSH ping[6] commands had
16205 The apps/system/png and ping6 command uses the sem-standard
16208 * Platform-Specific Support (apps/platform)
16211 ChangeLog for the complete list of bugfixes and for additional, more
16216 - Task Environment Creation: Fix an error in the duplication of the
16222 zero-size partent environment. Noted by Anthony Merlino.
16223 - timer_create(): Fix watchdog resource leak if cannot allocate a new
16225 - OS Internal Functions: Internal OS functions should not return error
16228 is too long to duplicate here (please refer to the ChangeLog for
16230 - OS Internal Functions: Not only should internal OS functions not
16234 ChangeLog for details).
16235 - OS Internal Functions: Create OS internal versions of many
16241 to list here (see the ChangeLog for details).
16242 - Task Exit: task_exithook.c fails to link if signals are disabled
16245 - memalign(): Fix heap corruption caused by using unaligned chunk
16247 corruptions when nodes are shrink further (for example, 24 bytes ->
16249 - SMP: In sched/sched/sched_cpuselect.c, in order to find the cpu
16252 - spinlocks: Disable local interrupts in spin_setbit() and
16255 - atexit()/on_exit(): Clear atexit()/on_exit() function pointer
16262 - tmpfs: Fixed directory unlocking in tmpfs_opendir. From Dmitriy
16264 - fcntl(): fcntl() did not return success fail for F_SETFL. Reported
16266 - tcdrain(): tcdrain() was recently added to the NuttX C library.
16270 point hooks were added. In non-FLAT builds, access via system calls
16272 - FS FAT: Fix hard-fault when listing contents of FAT root. From
16274 - procfs: Correct a problem that was causing an apparent directory to
16277 fs/mount, and fs/usage. Of course, there is no directory fs in this
16281 type file). This was fixed by adding a check for matching lengths.
16284 - procfs: Fix uptime being clse to maximum 32-bit value in certain
16285 config. From Juha Niskanen.
16289 - binfmt/: Don't schedule starthook if there are no constructors.
16293 - LCD: ILI9341 initialize method not permitted to set errno.
16297 - Networking: net/netdev/netdev_ifconfig.c: Was not returning all of
16299 - Networking: In some cases, packets are still not sent behind the
16303 - SIOCGIFCONF and SIOCGLIFCONF IOCTL commands should only report on
16305 - recvfrom(): Fix double leave_cancellation_point on error path.
16307 - send(): Verify that sock descriptor is valid. Fixes assertion when
16309 - sendto(): Remove assert check for null psock and buf input
16311 checked for later in psock_send and psock_sendto. Change null check
16312 for 'buf' so that it is handled same as in recvfrom.c (return
16313 -EINVAL instead of assert). From Jussi Kivilinna.
16314 - sockgetname() files need to include udp/udp.h and tcp/tcp.h or
16317 - dup()/dup2(): There was a reference counting problem in the TCP
16319 underlying dup() and dup2() for sockets. When net_clone() calls
16325 - close(): There was a possible recursion that could eventually
16334 - inet: Add check for protocol before handing out TCP and UDP sockets.
16335 - IP Forwarding: Fixes typo that caused build error when IP
16338 - IP Forwarding: Do not add link layer header size to d_len inside
16340 - TCP Networking: When CONFIG_NET_TCP_WRITE_BUFF=y there is a
16342 configuration, the TCP connection's 'semi-permanent' callback,
16348 - UDP Broadcast: Fix some issues with regard to UDP broadcast
16350 - ICMP: Fix an error in the poll logic. It was assumed that the
16354 - ICMPv6: Fixes several errors preventing icmpv6_radvertise.c from
16357 link-local IP address instead of the address in the netdev
16362 separate prefix from the config. From Sakari Kapanen.
16363 - ICMPV6: icmpv6_input() needs to set d_len to 0 after consuming echo
16365 - ICMPV6: Fix an error in the poll logic. It was assumed that the
16369 - IGMPv2 Send: Fix incoming IGMP checksum calculation. From Louis
16371 - ARP: Fix IGMP Ethernet address computation. From Louis Mayencourt.
16375 - CC1101: CC1101 driver not permitted to set errno.
16376 - 6LoWPAN: Correct an error in uncompressing multicast address.
16377 - 6LoWPAN: Correct a bug in handling uncompressed frames (IPv6
16380 - 6LoWPAN: Fix an endian-ness problem in 6LoWPAN address
16382 - 6LoWPAN: The logic that extracts interface identifier from the IP
16388 - Serial: 16550 UART driver IOCTL method must not set errno; it must
16390 - LIS3DSH: Added the argument parameter (FAR void *arg) to the
16392 definition for ISRs in xcpt_t. Changed the check for working queue
16395 - LIS2DH: Fixes for self-test. From Jussi Kivilinna.
16396 - LIS2DH: Fix use of obsolete dbg macro. From Jussi Kivilinna.
16397 - LIS331DL: LIS331DL driver not permitted to set errno.
16398 - HTS221: Power-on sensor for loading calibration data. From Jussi
16400 - MCP2515: Fix the MCP2515 Bit Rate Prescale calculation. Fix BRP
16401 for SET_BITTIMING ioctl as well. From Alan Carvalho de Assis.
16402 - STMPE811: Fix GPIO operation of STMPE811 driver.
16403 1. STMPE811_GPIO_DIR was defined for register name and later was
16404 redefined to be the pin direction mask for `stmpe811_gpioconfig`.
16408 2. The STMPE811 register GPIO_DIR uses bit value 1 for output and 0
16409 for input, but `stmpe811_gpioconfig` set the opposite.
16413 - BQ2429X: Add BATIO_OPRTN_SYSON for enabling BATFET after SYSOFF.
16418 - Simulation: Serial and console drivers are not permitted to set
16421 * ARMv7-M:
16423 - ARM Stack Check: Fix assert panic when both TLS and interrupt stack
16428 - XMC4 USIC: Kconfig was not selecting XMC4_USIC for USIC1. From Alan
16430 - XMC4 UART: Fix XMC4xxx USIC UART sginal to be high level when in idle.
16432 - XMC4 UART:xmc4_uart_configure() expects the channel# not uartbase as
16434 - XMC4 UART: Enable RX/TX status. From Alan Carvalho de Assis.
16435 - XMC4 UART: The Alternative Receive Interrupt was not being
16440 - XMC4500-Relax: Setup max. freq. 120MHz and setup pull-up to UART
16445 - SAMv7: DAC and ADC drivers are not permitted to set the errno.
16446 - SAMv7: Correct an error in RX DMA setup. From Manish Kumar Sharma.
16447 - SAMv7 USB: It is necessary to disable pre-emption and interrupts
16453 - LPC31xx: Serial and console drivers are not permitted to set
16458 - lpc43xx: lpc43_adc.c was being selected by the build system when
16463 - LPC43xx Ethernet: Fix some backward logic setting full-duplex and
16466 - lpc43xx: UART_RX pins should be configured with input buffers
16471 - STM32 F2: Fixed build for STM32F20XX platforms when
16473 - STM32 F4: Remove ltdc.h and dma2d.h. Those header files in that
16479 - STM32 L4: Build stm32l4_idle.c only if CONFIG_ARCH_IDLE_CUSTOM is
16481 - STM32 F7: Remove ltdc.h and dma2d.h. Those header files in that
16491 - STM32: DAC and ADC drivers are not permitted to set the errno.
16492 - STM32 ADC: Clear pending interrupts. From Mateusz Szafoni.
16493 - STM32 CAN: Lower part of STM32 CAN driver
16504 - STM32 HRTIM: Fix pclk calculation. From Mateusz Szafoni.
16505 - STM32 HRTIM: Fix burst mode prescaler update. From Mateusz Szafoni.
16506 - STM32 (alt) I2C: Ensure proper error handling. Injecting data
16510 - STM32: LTDC and DMA2D drivers are not permitted to set the errno.
16511 - STM32 RTC: Workaround for potential subseconds race condition. In
16513 to lock the values in the higher-order calendar shadow registers
16520 updated. This can result in a non-consistency of the three
16523 - STM32 Serial: Do not stop processing input in SW flow-control
16525 - STM32F33xxx ADC: Add some publicly visible interfaces and some
16527 - STM32F33xxx DMA: Add public interface to handle with DMA
16529 - STM32F33xxx RCC: Fix CAN clock enable. From Mateusz Szafoni.
16530 - stm32 F4 I2C: Ensure proper interrupt handling. Injecting data
16532 continually re-enter the isr with SB not set and BTF and RxNE set.
16535 - STM32 L4 Serial: Do not stop processing input in SW flow-control
16537 - STM32 F7: LTDC and DMA2D drivers are not permitted to set the errno.
16538 - STM32 L4: DAC and ADC drivers are not permitted to set the errno.
16539 - STM32 L4 DAC: Do not configure output pin if it is not used. From
16541 - STM32 L4 RTC, PM: Small fixes to subseconds handling, ADC
16542 power-management hooks
16543 - STM32 F4 RTC: Fix reading alarm value that is more than 24h in
16545 - STM32 L4 RTC: Fix reading alarm value that is more than 24h in
16547 - STM32 L4 TIM: Fix compilation of timers with complementary outputs
16549 - STM32 L4 RCC: Restore backup-registers after backup-domain reset.
16551 - STM32 L4 RTC: Correct RTC_SSR and RTC_TR read ordering. In all
16553 lock the values in the higher-order calendar shadow registers until
16555 don't keep a workaround for a hypothetical race condition (not in
16556 any L4 errata, lets for once assume ST's silicon works as it is
16558 - STM32 L4 RTC: Init mode was never exited because nested locking in
16560 - STM32 L4 RTC: Use backup register magic value instead of INITS
16567 - STM32 L4 RTC: Put back the SSR race condition workaround. ST has
16570 discussion: https://community.st.com/thread/43710-issue-with-rtc-maximum-time-resolution .
16572 - STM32 F7 BBSRAM: Avoid assert in stm32_bbsram_savepanic. If panic
16576 - STM32 F7 I2C: fix I2C_M_NORESTART handling. From Jussi Kivilinna.
16577 - STM32 F7 I2C: Restore bus frequency after I2C reset. Copy
16580 - STM32 F7 RTC: Fix reading alarm value that is more than 24h in
16585 - STM32F334-DISCO: Add missing ram_vectors configuration in linker
16587 - Nucleo-F334R8: Add missing ram_vectors configuration in linker
16589 - Nucleo-F334R8: Add Missing ADC trigger configuration to the highpri
16591 - STM3240G-EVAL: The timer frequencies (BOARD_TIMx_FREQUENCY) are
16596 - STM32F429i-DISCO: The ltdc configuration has been deleted because
16599 removed for the same reason.
16603 - configs/z80sim and xtrs: Serial driver lower halves ioctl methods
16605 - z80 Make.defs: Fixes dependency generation with newest SDCC
16607 - configs/z80sim: Fix a naming problem. Also, don't try to build the
16609 - Z80: Makefile fix for use with current SDCC.
16613 - configs/: All defconfig files that include
16616 - configs/: All NX configuration... Because of recent changes to
16618 for NXFONTs too and need to match the select BPP for NX.
16619 - Build system: Fix CONFIG_BUILD_KERNEL logic directories that have
16620 ubin and kbin subdirectories. Conditional logic was fine for
16626 - libc/stdio: Build the lib_noflush() and lib_snoflush() stubs even
16628 - libc and libnx: When the libraries are built into two libraries, a
16634 - libc/match: Use of exp() vs expf() in logf() caused function to be
16636 - libnx: Fixes a memory leak that is caused because the client message
16639 - sscanf(): Fix sscanf() character conversion (%c): do not add '\0' at
16640 the end as for strings, cause, for example, parsing one character
16642 will overflow one byte variable argument and corrupt memory for
16647 - tools/: configure.sh and configure.c should redirect stdout to
16652 - apps/nshlib/: Avoid truncating the strcmp result in the parser
16653 into a unsigned char variable. nshlib/nsh_netcmds.c: Check for
16655 - apps/nshlib/: Fix resource leak in 'dd' commenad when 'if=' or
16656 'of=' params are repeated in the command line. For example:
16659 - apps/nshlib: This commit eliminates the ping and ping6 commands
16660 from NSH and replaces them with 'built-in' commands at
16663 be removed. The new system/ping and ping6 built-in commands uses
16666 - apps/nshlib: Fix parsing of empty strings when CONFIG_NSH_CMDPARMS
16671 - All configurations that use NXIMAGE or NXHELLO must select
16674 - All configurations that use NXLINES must select NX_MULTIUSER. All
16677 - apps/examples/adc: Fix g_adcstate.count initialization. From
16679 - apps/examples/elf: Remove low-level interfaces and replace with
16681 - apps/examples/nxflat: Remove low-level interfaces and replace with
16683 - examples/ostest: Works around a bug in printf() when cancellation
16687 canceled and this leaves the semaphore in a bad state. No fix for
16689 - apps/examples/nx: The NX example no longer supports single user
16691 - apps/examples/nxtext: The nxtext example no longer supports single
16693 - apps/examples/nxhello now supports only multiuser mode.
16694 - apps/examples/nximage now supports only multiuser mode.
16695 - examples/nxlines: Now supports only multiuser mode.
16699 - apps/netutils/ftpc: Fix some crazy comparisons to determine is a
16704 - apps/system/i2ctool: Fixed i2ctool write operation in `no restart`
16705 mode (flag `-n`). It seems that I2C driver has changed a bit since
16707 `no restart` flag (-n) was passed to it. From Dmitriy Linikov.
16709 NuttX-7.24 Release Notes
16710 ------------------------
16713 and is available for download from the Bitbucket.org website. Note
16714 that release consists of two tarballs: nuttx-7.24.tar.gz and
16715 apps-7.24.tar.gz. These are available from:
16720 Both may be needed (see the top-level nuttx/README.txt file for build
16727 - SMP: Introduce spin_lock_irqsave() and spin_unlock_irqrestore().
16732 - System Timer: Replace critical section APIs with spinlock APIs.
16736 - POSIX Timers: Replace critical section APIs with spin lock APIs in
16737 clock_gettime.c. This change will improve performance for SMP
16738 systems but nothing changes for non-SMP systems. In SMP mode,
16741 - SMP: Introduce spin_lock_wo_note() and spin_unlock_wo_note(). These
16747 - Interrupts: Add a configuration option to show interrupt
16752 - VFS: Add support for truncate() and ftruncate().
16753 - FAT, SmartFS, UserFS, UnionFS, TmpFS, NFS: Add truncate() support.
16754 - FAT. Effectively handles the situation when a new file position is
16761 - HiletGo OLED: Add configuration support for HiletGo SSD1306 OLED.
16762 - lcd/ft80x: This commit adds an FTDI/BridgeTek FT80x GUI driver. It
16768 - 6LoWPAN: Adds configuration options for specifying preloaded
16769 address contexts for compression From Anthony Merlino.
16770 - TCP: Introduce tcp receive window control based on I/O buffer.
16771 NOTE: The algorithm is still experimental but useful for http
16773 - UDP: Add an implementation of UDP write buffering.
16774 - Routing Tables: Adding ftruncate() support eliminates an issue
16775 in file-based routing table management system.
16776 - Telnet: Add support for Telnet character mode From Masayuki
16781 - drivers/input/ft5x06.c: Add a driver for the FT5x06 capacitive,
16782 multi-touch, touchscreen controller.
16783 - drivers/input/ft5x06: Add a polled mode of operation for the FT5x06
16784 in attempt to work around the fact that the LPCXpresso-LPC54628
16785 chose a non-interrupt pin for the FT5x06 interrupt. Driver is still
16787 - drivers/power/bq2429x.c: Add trickle charging mode From Juha
16789 - drivers/sensors: Add support to MAX44009 ambient light sensor.
16791 - drivers/sensors: Added support for LIS3DH accelerometer sensor.
16793 - drivers/eeprom: EEPROM driver for AT24xx compatible EEPROMs.
16798 - sim: Add support for a RAM MTD driver and initialization for use
16800 - sim: Add support for testing NXFFS.
16804 - ARMv7-A, ARMv7-R, ARMv7-M: Add atomic read-add-write and
16805 read-subtract-write functions.
16809 - XMC4xxx: Refactor PLL setup, refactored PLL/CLK config, easier,
16810 checks for correctness, call go_os_start if STACK_COLORIZED, smarter
16811 config of EXTCLK output freq. From David Alessio.
16815 - Add FPU to xmc4 ostest. Remove +x from makefiles, preserve
16821 - SAMD: SAMD External Interrupt Controller (EIC) support From Matt
16823 - SAMD/L: Added Analog Comparator basic initialization From Matt
16825 - SAMD/L: Added FDPLL clock support. Fixed sequence of OSC32K
16827 - SAMD/L: Added loading factory USB calibration data from NVRAM.
16829 - SAMD/L: Added experimental DMA support to SPI driver. spi_exchange()
16830 uses a pair of DMA channels for TX and RX. From Matt Thompson.
16834 - Flip&Click SAM3X: Add board support for the Mikroe Flip&Click
16836 - Flip&Click SAM3X: Adds basic board support for the HiletGo OLED.
16840 - PIC32MZEF: Add architectural support for the PIC32MZEF family.
16844 - Flip&Click PIC32MZ: Adds board support for the Mikroe Flip&Click
16846 - Flip&Click PIC32MZ: Add board support for HiletGo OLED.
16847 - Flip&Click PIC32MZ: Add an nxlines configuration for use in
16852 - LPC43xx: Adapt LPC176x RTC driver for the LPC43xx. From Gintaras
16854 - LPC43xx: Add Windowed Watchdog Timer (WWDT) driver. Tested on
16855 LPC4357 but should be compatible for all LPC43xx MCUs.
16857 - Leverage the LPC54xx SD/MMC back to the LPC43xx (where it came from
16862 - Bambino-200e: Add LPC43 SDMMC board support to Bambino-200E. From
16867 - LPC546xx: Added basic architectural support for the LPC546xx
16872 - LPC546xx: Basic NSH configuration includes support for UARTs,
16874 - LPC546xx: Additional drivers include EMC, I2C, Ethernet
16875 - LPC546xx: Implement GPIO interrupt support.
16876 - LPC546xx: And unverified SPI driver is included.
16877 - LPC546xx: Ported LPC1788 LCD driver to use the LPC54xx pin.
16878 - LPC546xx: Bring in LPC43xx SD/MMC driver from
16879 https://github.com/Smoothieware/smoothie-nuttx/tree/master/nuttx/arch/arm/src/lpc43xx
16880 and adapt for use with the LPC43xx
16881 - LPC546xx: Add DMA driver ported from the LPC43xx GPDMA driver.
16882 - LPC546xx: Bring in WWDT driver from LPC43.
16883 - LPC546xx: Add an RTC driver and a RTC character driver lower half.
16884 - LPC546xx: Add support for a random number generator.
16885 - LPC546xx: Add an Ethernet driver.
16889 - LCXpresso-LPC54628: Added support for the LPCXpresso-LPC54628
16890 board. The initial bring-up used a basic NSH port.
16891 - LCXpresso-LPC54628: On-board SDRAM is also supported
16892 - LCXpresso-LPC54628: Add support for I2C2 and for the I2C tool to
16894 - LCXpresso-LPC54628: Add support for the USER button. Enable the
16896 - LCXpresso-LPC54628: Add the fb configuration for testing the LCD.
16897 - LCXpresso-LPC54628: Add support for the the FT5x06 touchscreen
16900 - LCXpresso-LPC54628: Add an NxWM configuration.
16901 - LCXpresso-LPC54628: Add logic to bring up SDMMC.
16902 - LCXpresso-LPC54628: Add logic to register the RTC character driver
16905 - LCXpresso-LPC54628: Add a netnsh configuration that was be used to
16907 - LCXpresso-LPC54628: Add LittlevGL graphics demo configuration.
16911 - LC823450 SMP improvements: (1) Apply irq_spin APIs to
16913 Modify IRQ control for i2s. Apply irq_spin APIs to
16915 - LC823450: LC823450 http streaming improvements: (1) Use spinlock
16921 - LC823450: Introduce DVFS. This version only supports manual mode
16926 - LC823450: Refactor timer driver. Add MTM timer APIs for DVFS.
16927 Introduce up_rtc_gettime() for CONFIG_RTC_HIRES. Introduce idle
16934 - LC823450-XGEVK: I2S interrupt will be handled on CPU0 with this
16936 balancing for networking with RNDIS. From Masayuki Ishikawa.
16937 - LC823450-XGEVK: Enable SPINLOCK_IRQ and NXPLAYER in rndis. From
16939 - LC823450-XGEVK: LC823450 http streaming improvements: (1) In SMP
16941 (2) Call up_enable_irq() to assign CPU0 for IRQ handling. (3)
16945 - LC823450-XGEVK: Enable DVFS in lc823450_bringup.c. Enable DVFS
16948 - LC823450-XGEVK: Explicitly assign I2S IRQ handling to CPU0. From
16950 - LC823450-XGEVK: Enable RTC_HIRES instead of RTC_DATETIME (audio/
16956 - STM32 F7: Add support for the STM32F72x/73x family. From Bob
16961 - STM32 HRTIM: Add interface to change outputs SET/RST configuration.
16963 - STM32 HRTIM: Add interface to get timer clock frequency,
16966 - STM32 HRTIM: Add interface to set timer frequency, fix slave timers
16969 - STM32 HRTIM: Add repetition support and fix enum overflow From
16971 - STM32 HRTIM: Add HRTIM push-pull mode configuration. From
16973 - STM32 FLASH: Add progmem support for STM32L15XX From Juha Niskanen.
16977 - configs/photon: Adds BOARD_TIMn_FREQUENCY macros From Anthony
16979 - configs/indium-f7: Adds support for the RAF Research Indium-F7
16981 - Rename the configs/stm32f0discovery board directory to
16982 configs/stm32f051-discovery. There are others stm32f0discovery
16985 - configs/stm32f072b-discovery: Adds support for stm32f072b-disco
16988 - configs/stm32f103-minimum: Add AT24 EEPROM support on STM32F103-
16990 - configs/stm32f103-minimum: Add support to BMP180 on BluePill
16991 (stm32f103-minimum) board. From Alan Carvalho de Assis.
16992 - configs/stm32f334-disco: Add buck converter and boost converter
16994 - configs/stm32f103-minimum: Add zerocross support to STM32F103-
16996 - configs/stm32f103-minimum: Add OLED SSD1306 support to
16997 STM332F103-Minimum From Alan Carvalho de Assis.
16998 - configs/stm32f103-minimum: Add board support to MAX6675 Thermocouple
17000 - configs/stm32f746g-disco: Add stm32f746g-disco Ethernet configuration.
17003 - configs/viewtool-stm32f107: Add support for FT80X initialization.
17004 Add ft80x configuration that will eventually be used for testing the
17009 - tools/logparser: Add a tool which will help me to convert git logs
17014 - apps/nshlib: Add support for a truncate command. This will be used
17016 - apps/nshlib: Add support for Telnet character mode. From Masayuki
17018 - apps/nshlib: Add support for '-n' option to the echo command. From
17020 - apps/nshlib: Add irqinfo command.
17024 - apps/examples/userfs: Add truncate() support for userfs.
17025 - apps/examples/lvgldemo: Add lvgldemo example for LittlevGL.
17026 - apps/examples/veml6070: Add VEML6070 Application Example. From
17028 - apps/examples/bmp180: Add BMP180 application example. From Alan
17030 - apps/examples/ft80x: Add a test of the FT80x based on FTDI
17031 SampleApp. Includes tests of GPU primitives and graphics co-
17036 - apps/netutils/netlib: Add default route in netlib_set_dripv4addr().
17041 - apps/graphics/littlevgl: Add littlevgl library. From Alan Carvalho
17043 - apps/graphics/ft80x: Add the FTDU FT80x GUI support library.
17049 - apps/system/nxplayer: Add support for HTTP streaming in nxplayer.
17051 - apps/system/setlogmask: Adds 'setlogmask' application that allows
17054 - apps/system/usbmsc: Added Kconfig options to configure write
17055 protection for each LUN. From Fabio D'Urso.
17056 - system/stackmonitor: Re-design the stack monitor so that it does not
17062 ChangeLog for the complete list of bugfixes and for additional, more
17067 - System Timer: Change the way that the 64-bit time is sampled.
17068 Previously, we disabled interrupts before sampling the 64-bit
17072 disabling interrupts on a different CPU will provide no protection
17074 samples 64-bit timer is sampled twice and if 32-bit rollover was
17075 detected between samples, then loops until there is no rollover.
17076 - POSIX Timers: In SMP mode, running TCB is not always at the head of
17079 - Spinlocks: Add memory barrier operations in spin_unlock(). In ARM
17083 correctly for network streaming aging test. From Masayuki Ishikawa.
17084 - Sporadic Scheduler: Fix compiler error in Sporadic Scheduler when
17086 - Priority Inheritance: Fix some priority inheritance related issues
17087 … noted during review of logic. Also add some REVISIT comments for some issues noted in the design.
17088 - boardctl: Remove the BOARDIOC_TSCTEST_TEARDOWN and
17091 the touchscreen controller as a normal part of its board bring-up.
17093 like any other on-board device.
17094 - configs: CONFIG_MAX_TASKS must be a power of 2.
17095 - SMP: Introduce a new global IRQ clearing logic and tasklist
17103 critical section correctly. For this change,
17104 sched_resumescheduler.c is always necessary for SMP configuration.
17109 sched_cpu_select() during HTTP streaming aging test on LC823450-XGEVK.
17116 - SMP: Fix this_task() to be an atomic operation. In the previous
17124 - SMP: Implements a global scheduler lock capability as part of SMP
17125 support. This allows the scheduler to be locked with no knowledge
17128 is, itself, a non-atomic operation. This global scheduler lock
17130 - SMP: Extend the last global lock change to work with the
17131 LC823450-XGEVK which does not support the atomic fetch add but
17135 - SMP: Fix a infinite recursion problems that a recent changes
17137 with the LC823450 because you can disable inter-processor interrupts
17138 in that architecture; but you cannot in the ARMv7-A/GIC architecture.
17139 - SMP: Remove SMP related logic in sig_dispatch.c. This change
17140 prevents from a deadlock in up_schedulesigaction.c where inter-CPU
17141 signal handling is actually implemented. arch/arm/src/armv7-m: Fix
17142 signal handling for SMP. In previous implementation, signal handling
17143 for SMP was incorrect. Thus, for example, if an inter-CPU signal
17145 change fixes the issues and works for both inter-CPU signal handling
17147 - Tasking: Add nxtask_create(). Kthread_create() and nxtask_create()
17152 - Tasking: Threads started by board bring-up logic should be kernel
17154 - Tasking: Threads started by drivers should be kernel threads, not
17156 - Semaphore Usage: Added ECANCELED condition to DEBUGASSERT's
17159 - errno: Add new internal OS function nxsched_setaffinity() that is
17163 - errno: Internal functions sched_reprioritize() and
17164 sched_setpriority() no longer modify the errno value. Also renamed
17166 - errno: Add new internal OS function nxsched_getscheduler() that is
17170 - errno: Add new internal OS function nxsched_setparam() that is
17174 - errno: Add new internal OS function nxsched_getparam() that is
17180 - errno: wd_start() is an internal OS function and should not set the
17184 - errno: Fix several inappropriate accesses to get_errno() that were
17185 missed in previous changes (some going back to nuttx-7.23). Add new
17190 - errno: binfmt/, configs/, graphics/, libc/, mm/, net/, sched/: OS
17193 - drivers/, fs/ and libc/: OS references to the errno variable should
17198 - FAT: CONFIG_FAT_MAXFNAME may not exceed NAME_MAX (CONFIG_NAME_MAX)
17199 - NFS: Correctly infer file type. The file type is in struct
17202 - NFS: Fix buffer corruption. In case multiple read requests to the
17206 - VFS: reopen() should return NULL when oflags is less than 0, not
17210 - ProcFS: Fix an error in a common function that manages read data.
17211 - drivers/mmcsd: Respect SDIO_CAPS_DMABEFOREWRITE on CMD25. From
17213 - AT24xx: Correct page size for AT24C02 part. From Alexander
17215 - mtd_config.c: Add still more error handling (to detect bad
17218 revert of 4f18b4. Reported-by: Pascal Speck <iktek01@yahoo.com>
17222 - drivers/lcd: Fix the default I2C address of SSD1306 OLED display
17223 (7- vs 8-bit addressing) From Alan Carvalho de Assis.
17224 - drivers/lcd: lcd_framebuffer.c does not need to include board-
17226 - include/lcd: Eliminate a warning from an SSD1306 header file by
17232 - ARP: Fix an error introduced when ICMP and ICMP6 socket support was
17233 added in NuttX-7.3. A gratuitous ARP (or solicitation) was being
17235 - ARP: Fix IGMP multicast address computation on NuttX network stack.
17238 bytes of the given IPv4 address. From Louis Mayencourt.
17239 - ioctl: The existence of the network driver ioctl() method should
17243 - TCP: Write buffering logic should not wait for a free buffer if
17244 the socket was opened non-blocking.
17245 - TCP: Fixed bad return value handling in psock_tcp_send(). send()
17246 expects psock_tcp_send() to return a negated errno value, not -1
17247 with the errno set (GN: I added same change for tcp_send_buffered.c
17250 - TCP: Fixes hardfault when network goes done and network monitoring
17252 - TCP: tcp_send_[un]buffered.c: Check routing table in
17256 - TCP: Generalize Juho Grundstrom's IPv4 change for IPv6 as well.
17257 - UDP: Remove some conditional logic that was true if there is only a
17258 single network device, but not true in the multi-device context.
17259 - UDP: In sendto(), return EHOSTUNREACH if the network is down.
17263 - drivers/pipes: In poll logic, fix off-by-one error in calculation
17265 off-by-one when read index is larger than write index. This causes
17268 - drivers/audio: Improve stability of the WM8776 driver in SMP mode.
17271 - drivers/ioexpander: Fixed build of PCF8574 driver when its
17272 interrupts aren't enabled by config. From Dmitriy Linikov.
17273 - drivers/syslog: Fixes LOG_UPTO macro to include specified log level.
17275 - drivers/sensors: Fix HTS221 sensor reset with BOOT bit From Jussi
17277 - drivers/loop: If we want to open read-only in losetup.c, flags
17279 - drivers/timers/ds3231.c: Correct some debug statements. From
17281 - drivers/sensors/lis2dh: Use realtime clock if monotonic is not
17283 - drivers/i2c and drivers/spi: Fix compile error if
17287 * ARMv7-A:
17289 - Data Cache: Fix cp15_invalidate_dcache. In cases where more than
17292 the .size macro was fixed for both cp15_invalidate_dcache. From
17294 - SMP: Port the signal-related SMP change by Masayuki Ishikawa to the
17295 ARMv7-A family.
17299 - SMP: Port the signal-related SMP change by Masayuki Ishikawa to the
17304 - XMC4xxx: Only setup USB clock when USB PLL is enabled From Alan
17306 - XMC4xxx: Fix USIC_BRG_SCLKCFG definition From Alan Carvalho
17311 - MIPS32: In up_idle, the kludge that was conditionally enabled if
17314 - PIC32MZ: Fix some typos in debug instrumentation in pic32mz-gpio.c;
17315 fix some typos related to UART5 configuration in pic32mz-serial.c.
17319 - SPI: In sam_spibus_initialize(), the pinmux configuration was
17322 - SPI: Fixes g_spi2ops and g_spi2dev using incorrect values From Matt
17324 - SPI: SPI must be disabled before changing the mode bits in CTRLA
17326 - DMA: Fix DMA controller support. From Matt Thompson.
17330 - LPC17xx: Disable LPC17 FDR when not used. If a boot loader set the
17337 - Kinetis: Correct some Ethernet PHY register bit tests for the
17342 - arch/arm/src/LC823450: Add SP_DMB() into lc823450_testset.c.
17346 up_testset() for LC823450. From Masatoshi Tateishi.
17350 - STM32 F3 RCC: A flash wait state configuration. Flash latency must
17354 the board variable STM32_SYSCLK_FREQUENCY. Tested on stm32f334-disco
17355 board. From Gwenhael Goavec-Merou.
17356 - STM32 RTC: Make STM32 usable with an external RTC.
17357 - STM32 SPI: Removed unnecessary (and incorrect) speed limitation.
17359 - STM32 SPI: I have a SPI bus with both Mode 0 and Mode 3 devices
17362 …read. I traced the reason for the lock-up to arm/arm/src/stm32f7/stm32_spi.c function spi_setmode…
17368 - STM32 and STM32 F7: Remove confusing, redundant, and misleading
17372 stm32_bkp.h should only be used for STM32 F1. stm32_rtcc.h should be
17374 - STM32 and STM32 F7: Architecture-specific code is not permitted to
17376 - STM32 F4 I2C: Correct some recent changes to STM32F4 I2C that broke
17378 - STM32 F4 I2C: Corrections to STM32 F4 I2C to restore functionality.
17380 - STM32 F4 I2C: Corrections to STM32 F4 I2C to fix the NORESTART
17382 - STM32 F7: Fixes a bug in multi-block SD-card operations on the
17383 STM32F7 platform. DBLOCKSIZE must be the size of SD-card block, not
17385 - STM32 F7: Fix undefined variable when using USART1 for other
17387 - STM32 F7: Backport RTC alarm setting changes from STM32L4. Most
17391 - STM32 L4 Flash: Change flash programming to use page buffer for
17396 - Nucleo-L432KC: Fix some bogus logic noted by Fanda.
17397 - configs/nucleo-* and configs/stm32l476vg-disco: Fix more
17399 - Nucleo-L432KC: Fixed nucleo-l432kc broken build when
17401 - Nucleo-L432KC: Issue #85: /dev/userleds is not working for
17402 Nucleo-L432KC fixed From Fanda Vacek.
17403 - STM32F429I-Disco: Separate SPI4 from MTD init. I was trying to
17404 attach a non-MTD peripheral to an STM32F429I Discovery Board's SPI4
17409 - STM32F103-Minimum: Remove CONFIG_NX_LCDDRIVER dependence from
17414 - libc/stdio: In dtoa(), up_interrupt_context() is used in a debug
17415 assertion. up_interrupt_context() is not available in the user-mode
17420 - libc/netdb: Fixed parsing of DNS response packets having compressed
17430 - tools/*.c: Add #define _GNU_SOURCE to all C files that call
17432 - tools/cvsparser.c: Add a check to avoid access past the end
17437 - apps/nshlib: Fix compile error when CONFIG_NSH_DISABLESCRIPT is not
17442 - apps/examples/touchscreen: Eliminate BOARDIOC_TSCTEST_SETUP.
17446 - apps/netutils/ftpc: Fix some corner-cases that could cause FTP to
17451 - apps/wireless/ieee802154/i8shark: Fixes special XBee compensation
17454 NuttX-7.25 Release Notes
17455 ------------------------
17458 and is available for download from the Bitbucket.org website. Note
17459 that release consists of two tarballs: nuttx-7.25.tar.gz and
17460 apps-7.25.tar.gz. These are available from:
17465 Both may be needed (see the top-level nuttx/README.txt file for build
17472 - fs/cromfs: Added CROMFS file system. CROMFS is a compressed, in-
17473 memory, read-only file system based on LZF.
17474 - fs/vfs: Added support for checking if a descriptor is a socket in
17479 - drivers/lcd: Remove support for the Nokia6100 LCD. That LCD uses a
17480 9-bit SPI interface (the 9th bit being the command/data bit that is
17483 support from the low-level, MCU SPI driver to manage that 9th bit.
17488 - net/tcp: Added support for TCP Keepalive, add SO_KEEPALIVE socket
17489 option. Added socket options needed to manage TCP-keepalive and TCP
17491 - net/tcp: In tcp_input(), add the logic to detect, decode, and
17492 respond to TCP Keep-Alive packets.
17493 - net/tcp: Extended support for sending to non-blocking tcp sockets.
17495 - net/bluetooth: Added support for AF_BLUETOOTH sockets.
17496 - drivers/net: Added TAP (network bridge) mode to tun.c. In the
17504 - wireless/ieee802154: Added basic MAC support for RX-ENABLE.request
17506 - wireless/ieee802154: Added MAC ackreq flag to TX descriptor for use by
17507 radio driver. The radio layer is responsible for a full "transaction".
17509 responsible for the handling of acks and retransmissions. This commit
17510 simply passes the ackreq meta-data flag along to the radio. Also
17513 - wireless/bluetooth: Bring in the Bluetooth stack from the Intel/
17514 Zephyr arduino101_firmware_source-v1.tar package.
17515 - drivers/bluetooth: Added re-architected version of the Bluetooth
17516 UART driver from the Intel/Zephyr arduino101_firmware_source-v1.tar
17518 - include/nuttx/wireless: Added a setbaud() method to the HCI UART
17521 - wireless/bluetooth and include/nutt/net: Added support for Bluetooth
17523 - drivers/wireless/bluetooth: Added a NULL device to support some very
17525 - drivers/wireless/cc3000: Eliminate support for the CC3000 wireless
17528 - drivers/wireless/ieee80211: Added BCM43428 support. From hhuysqt.
17532 - drivers/1wire: Added 1-wire subsystem and ds28e17 driver From Juha
17534 - drivers/1wire: Added PM hooks and unlink support to sht21 sensor
17535 (allowing hot-swappable I2C bus from 1-wire converter). Unlike most
17539 - drivers/i2c: Added support for the pca9540bdp i2cmultiplexer. From
17541 - drivers/power: Added pm_unregister From Juha Niskanen.
17542 - drivers/power: Added generic upper-half motor driver From Mateusz
17544 - drivers/rgbled: Added support for multichannel PWM (multiple PWM
17546 - drivers/sensors: Added support for Sensirion SHT2x humidity sensor.
17548 - drivers/sensors: Added LSM330 SPI and ADXL372 drivers along with the
17549 - drivers/sensors: Added support for INA3221 power sensor. This has a
17552 - drivers/sensors: Added multiple MAX31855 sensors feature support.
17554 - drivers/wireless/cc1101.c: Driver improvements from from lihaichen.
17555 - progmem interface: Discern r/w and erase page sizes. Introduce new
17558 up_progmem_erasesize for all architectures that already support
17559 progmem, assuming that for those architectures the sizes of both
17564 - configs/sim: Added a configuration that will support some limited
17569 - ARM: All ARM architectures now support CONFIG_ARCH_IDLE_CUSTOM.
17573 - MIPS: All MIPS architectures now support CONFIG_ARCH_IDLE_CUSTOM.
17577 - XMC4: Added SPI support for Infineon XMC45xx microcontroller. From
17582 - XMC4500-Relax: Added board support for SPI. From Alan Carvalho de
17587 - NRF52: Initial support for the NRF52 including UART, Timer, and
17592 - NRF52: Added watchdog timer drivers. Includes significant
17594 - NRF52: Added nRF52 Flash PROGMEM support From Alan Carvalho de
17599 - configs/nrf52-pca10040: Added support for the NRF52-PCA10040 board
17601 - configs/nrf52-pca10040: Added support for starting the watchdog
17603 - configs/nrf52-pca10040: Added a configuration for testing the
17608 - i.MX RT: Brings in basic support for the i.MX RT 1050 'crossover'
17611 credit to Ivan for the kill because he is the one to held on to
17616 - i.MX RT: Added power management hooks.
17617 - i.MX RT: Added eDMA support (unverified).
17618 - i.MX RT: Added Ethernet driver. From Jake Choy.
17619 - i.MX RT: Added cache operations to permit the Ethernet driver to
17620 work with the D-Cache enabled, at least in write-through mode.
17621 Added support for PHY interrupts and PHY IOCTLs.
17625 - IMXRT1050-EVK: Added support for booting from the on board HYPER
17627 - IMXRT1050-EVK: Added logic to support the board's user LED. From
17629 - IMXRT1050-EVK: Added procfs auto-mount support in imxrt_bringup.c.
17631 - IMXRT1050-EVK: Added LIBCXX test configuration.
17632 - IMXRT1050-EVK: Added support for the imxrt1050-evk button. From
17634 - MXRT1050-EVK: Added support for on-board NOR FLASH boot. From
17636 - IMXRT1050-EVK: Disable LED support because pins conflict with PHY.
17638 Added an NSH configuration for testing Ethernet.
17642 - K28F: Added architecture support for the Kinetis K28F.
17646 - SDHC: Make Kinetis SDHC pullups work the same as the STM32 SDIO
17651 - Freedom-K28F. Added support for the Kinetis Freedom-K28F board.
17655 - LPC17xx: Added support for ARMv7-M run time stack checking on NXP
17661 - LPC17xx: Added a configurable option to allow using a part of
17668 - Olimex-LPC1766STK: Remove support for the Nokia6100 LCD. That
17669 LCD uses a 9-bit SPI interface (the 9th bit being the command/data
17675 - configs/bambino-200e: Added support for multiple MAX31855 sensors
17676 to the bambino-200e. From Tiago Almeida.
17680 - arch/or1k/src. Added basic architectural support for the OpenRISK
17686 - configs/or1k. OpenRISK mor1kx Qemu simulation. From Matt Thompson.
17690 - STM32: Added support for the STM32F401xB and STM32F401xC families.
17694 - STM32 HRTIM: Added HRTIM software capture trigger, added software
17697 - STM32 ADC: Added ADC injected channels configuration. From Mateusz
17699 - STM32 HCIUART: Added a Bluetooth HCI UART lower half driver for the
17701 - STM32 HCIUART: Implement the setbaud() method for the STM32 HCI
17703 - STM32 SDIO: Added support for SDIO card to SDIO driver. From
17705 - STM32 SDIO: Added internal pull-up option for SDIO pins. From Alan
17707 - STM32 F2/F4 ADC: Added Vbat measurement to ADC driver for
17710 channel first. For Vbat channel the ioctl cmd is
17713 Moreover, since Vbat input contains a built-in voltage divider, it
17717 - STM32, STM32L4 1WIRE: Added one bit read and write to 1-wire
17718 interface. This is needed for devices that require single bit
17719 timeslot generation and for 1-Wire search algorithm triplets. From
17721 - STM32 F3 SPI: Enable DMA for SPI on stm32f30xxx MCUs. From Michal
17723 - STM32 L4 1WIRE: Ported 1wire driver from STM32. From Juha
17725 - STM32 L4 I2C/SPI/1WIRE: Added PM hooks to I2C, SPI and 1-wire From
17727 - STM32 F7 RTC: Added CONFIG_RTC_PERIODIC support. Also makes the RTC
17729 - STM32 F7 ADC/I2C/SPI: Added PM hooks to ADC, I2C and SPI. From
17734 - Indium-F7: Removed support for the Indium-F7 board. This was done
17735 for two reasons: (1) The board support was just clone of the
17736 Nucleo-144 board support with naming changes. There has been no
17737 support and no further development for the board support. (2) There
17738 does not seem to be any available Indium-F7 board available to the
17741 - Nucleo-L452RE: Added buttons example From Juha Niskanen.
17742 - Nucleo-L476RG: Added support to Nokia LCD PCD8544 on nucleo-l476rg.
17744 - Nucleo-L476RG: Added nxdemo configuration to nucleo-l476rg using
17746 - Olimex-STM32-P407: Added a zmodem test configuration.
17747 - Olimex-STM32-P407: Added the module configuration.
17748 - Photon: Added RGB led support From Anthony Merlino.
17749 - STM32F103-Minimum: Added support for DFU bootloader From Simon
17751 - Spark: Removes Spark board configuration. Still available in the
17752 Obsoleted repository. If there is no CC3000 support, then there is
17753 no purpose in supporting the Spark either.
17754 - STM32F334-Disco: Added buck/boost converter example configuration.
17756 - STM32F4 Discovery: Added support for multiple MAX31855 sensors to the
17758 - STM32F4 Discovery: Added support in bring-up logic to initialize the
17760 - STM32F4 Discovery: Added MAX7219 support to STM32F4Discovery board.
17762 - STM32F4 Discovery: Added board configuration for CS43L22 audio
17764 - STM32F4 Discovery: Added a module configuration for testing the
17767 - STM32F429I-DISCO: Added a LittlevGL configuration for stm32f429i-
17769 - STM32F746G-DISCO. Added clang support to stm32f746g-disco board.
17771 - STM32L1 Discovery: Added support for the STM32L152RCT6 version of
17776 - TMS570: Added support for the TMS570LS3137ZWT. From Ivan Ucherdzhiev.
17780 - configs/tms570ls31x-usb-kit: Added support for the TI Hercules
17785 - CC3200: Remove all support for the CC3200. This was a port that was
17787 with no wireless support?.
17791 - EEPROM: Implements an EEPROM driver in compliance with MTD driver
17792 as provided by NUTTX for TM4C1294. The EEPROM driver currently
17793 supports only two functionalities - read bytes(multiple of 4) and
17795 - FLASH: Implemented Flash CONFIG_MTD_BYTE_WRITE for TM4c1294.
17798 - Serial: Added TERMIOS IOCTL support to the Tiva serial driver.
17803 - CC3200-Launchpad: Remove all support for the CC3200-Launchpad.
17805 partial CC3200-Launchpad board support with no wireless support?.
17809 - libs/: Moved all of the libraries under a common directory called
17811 for now.
17812 - libs/libc/time: Added an implementation of clock().
17813 - libs/libc/lzf: Added a modified version of Marc Alexander Lehmann's
17815 - libs/libc/unistd: Initial, minimal implementation of sysconf().
17818 - libs/libdsp: Added DSP support library. From Mateusz Szafoni.
17819 - include/sys: Added resource.h.
17820 - include/nuttx/video: Add overlay support to framebuffer interface
17825 - tools/gencromfs.c: Added tools/gencromfs.c, a tool that can be used
17827 - tools/mkromfsimg.sh: Include an option in mkromfsimg.sh to ignore
17830 - tools/nxstyle.c: Added check for blank lines before and after single
17832 - tools/sethost.sh: Added support for macOS.
17833 - tools/uncrustify.cfg: An initial cut at an uncrustify C formatting
17839 - Makefile: Added support for nconfig frontend for 'make nconfig'.
17841 - configs/: Added definition of strip to many Make.defs files.
17842 - staging/: Remove fixed lib/ subdirectory and its content. Replace
17846 - tools/: Move all build-related files (except the top-level Makefile)
17847 into the tools/ sub-directory. This really cleans up the top-level
17852 - apps/nshlib: Added the mkfatfs -r option which can be used to
17858 - apps/examples/adxl372_test and lxm330spi_test: Added ADXL372 and
17860 - apps/examples/cc3000: Removed the CC3000 example. From Alan
17862 - apps/examples/cromfs: Added an example of how to build a CROMFS
17864 - apps/examples/elf: Extend the ELF program module demo so that you
17866 - apps/examples/elf: Use strip command to make ELF binaries MUCH
17869 - apps/examples/max31855: Added an example to read multiple max31855
17871 - apps/examples/netloop: Update network loopback example so that it
17873 - apps/examples/nxdemo: Added nxdemo application From Alan Carvalho
17875 - apps/examples/powerled: Added arch initialization.
17876 - apps/examples/uavcan: Removed because apps/canutils/libuavcan is no
17881 - apps/system/lzf: Added the test case from Marc Alexander Lehmann's
17883 - apps/system/embedlog: Support for embedlog data loggin package from
17885 - apps/system/zmodem: Added an option to enable hardware flow control
17887 - apps/system/zmodem: Call tcflush() before closing the serial port.
17893 the buffered Tx data since there is no where it can go. tcflush()
17900 - apps/canutils/libuavcan. Removed! libuavcan has not built for a
17903 the portable POSIX OS interface. No one is maintaining the port so
17904 there is no alternative but to remove it.
17908 - apps/netutils/tftpc: Modified the TFTP client functions to use a
17910 write to arbitrary destination (in my case, a MTD device - for
17911 firmware update). Two new functions are introduced for this, named
17921 - apps/wireless/bluetooth/btsak: Added a Bluetooth debug tool.
17924 ChangeLog for the complete list of bugfixes and for additional, more
17929 - sched/sched: Fix a deadlock in SMP mode. Two months ago, I
17931 protect tasklists in SMP mode. This change works well for HTTP
17932 audio streaming aging test with lc823450-xgevk. However, I found a
17939 net_lock.c for SMP for SMP. From Masayuki Ishikawa.
17940 - sched/sched: Change ordering of round-robin time slice check
17951 - fs/fat: In fs_stat(), when stat'ing the root directory, avoid
17955 - fs/fat: Avoid calculating the bogus directory entry address for
17956 the FAT root directory (since it has no directory entry). This
17957 change should have no effect, other than making the logic clearer.
17959 - fs/mount: Fix wrong size reported by df -h. Reason is that size
17963 - fs/smartfs: Fix a hardfault in SmartFS. Problem occurred when
17966 - fs/vfs: Fix negative errno set in fs_open.c From Michal Lyszczek.
17967 - drivers/mtd: Fixed a W25 driver w25_cacheflush sector bug. From
17969 - drivers/mtd: mtdconfig_register() returned OK instead of -ENOMEM on
17974 - drivers/lcd/ft80x: ACTIVE host command appears to be formatted
17976 be big-ending, BCD. Fix some compile issues when debug features
17978 - drivers/lcd/ft80x: Fix a typo that caused the driver to fail to
17980 - Review all board implementations of board_lcd_initialize(). The
17982 as an 'int' must return a negated errno value on failure and a non-
17986 non-negative.
17990 - net/tcp: Fixed problem with send() return value when using
17992 - net/sixlowpan: Fix a nasty, byte-ordering/endian-ness problem.
17995 - net/sixlowpan: Preserve big-endian (network order) when
17997 - net/sixlowpan: TCP send should have PSH and ACK flags set when
18000 - net/udp: Fix several issues using connected UDP sockets: sendto()
18002 connect UDP sockets instead. recvfrom() is no longer necessary.
18009 - net/udp: Resolve race condition in connection-less UDP sockets with
18010 read-ahead buffering. In connection-mode UDP sockets, a remote
18013 recv() will be accepted. This same mechanism is used for
18014 connection-less UDP sendto: A temporary remote address is written
18017 accept any address. When UDP read-ahead buffering is enabled,
18019 in the connection structure for some time. This can cause read-
18025 is in connection mode or if it is connection-less. This change
18027 connection is always ignored if the UDP socket is not in connection-
18028 mode. No for connection-mode sockets, that remote address behaves as
18029 before. But for connection-less sockets, it is only used by sendto().
18033 - drivers/wiresless/ieee80211: Correct some initialization problems
18035 - drivers/ieee802154/xbee: Added a timeout to send logic to handle
18041 - Per OpenGroup.org, syslog -- and, hence, nonstandard vsyslog, and
18042 debug wrappers -- does not return a value. Rename _vsyslog to
18045 - drivers/leds: Fixes RGB LED issues caused by uninitialized memory
18049 - drivers/sensors/lis2dh: Clear INT1 at SNIOC_WRITE_INT1THRESHOLD
18051 - drivers/sensors/sht21: Changed I2C_TRANSFER return value so that
18054 - drivers/serial: Per Matias Edlund: I recently used the tcflush
18060 - drivers/serial: Added a timeout to uart_tcdrain(). Even if
18065 This is a workaround for that.
18066 - drivers/sensors: Fix APDS9960 work queue BUG found by Kyle Lei.
18071 - arch/sim: Various fixes necessary to build the simulator under
18074 * ARMv7-R:
18076 - ARMv7-R: Corrected several ARMv7-R issues. From Ivan Ucherdzhiev.
18080 - XMC4500-Relax: Call xmc4_spidev_initialize() in xmc4_boot.c. From
18085 - LPC17xx USB: Fix USB device endpoint allocation bookkeeping. From
18087 - LPC17xx USB: Freeing endpoints should be set the same allocations
18089 - LPC17xx USB: Fix loss of RX initiatives. USB bulk endpoints are
18097 - Kinetis USG: USB device fixes: Use correct CONFIG OTG control,
18100 pending asynchronous resume interrupt needed to be re-armed after
18103 - Kinetis Serial: In kinetis_lowputc.c, fix esBRFA calculation
18104 effecting baudrate. Previous BRFA was not cleared and or-ed into
18108 - Kinetis Serial: In kinetis_lowputc.c, fixed parity settings.
18112 called 9-bit or 8-bit Mode Select is a misnomer. 8 bit mode when
18117 - configs/teensy-3.x: Remove CONFIG_USBDEV_DUALSPEED from the usbnsh
18122 - i.MX6: Bring in a few i.MX6 fixes that were committed to similar
18123 files for the i.MX RT.
18127 - STM32 F3: Problem: stm32f30xx hangs waiting for LSE to initialize.
18128 Reason for hang is that operation of setting LSE_ON does not take
18129 effect because there is no clock on PWR peripheral. This is
18134 - STM32 and STM32 L4 1WIRE: In 1wire driver, do not write useless
18136 - STM32 HRTIM: Fixed capture_get function,. From raiden00pl.
18137 - STM32 F3 ADC: Fixed bug in RCC reset logic that resets ADC1
18140 - STM32 Ethernet: In case of PHY failure, usually because of the
18142 in a while loop waiting for readiness, which will never happened.
18146 - STM32 F7 SDMMC: Added support for the second SDMMC device. The
18149 - STM32 Serial: Fix UART glitch when lowputc is enabled. From
18151 - STM32 USB: Skip recipient check for descriptor related
18156 - Tiva ADC: Fix compilation errors on Tiva ADC code when ADC is
18158 - Tiva Serial: Allow building of Tiva platform with no serial
18163 - lib/libc/netdb: Fixed boundary conditions in dns_recv_response().
18165 - libs/libc/modlib: Fixed backward test for an error in
18170 - Makefiles: Eliminate the spurious errors reported by 'make
18172 - Makefile(s): There is a sort command in the 'make savedefconfig'
18175 force LC_ALL=C just for the sort command so that we can all generate
18177 - Makefile(s): The clean_context target needs to invoke a
18180 - LibTargets.mk, tools/Config.mk: Drop executable bit on installed
18186 - apps/examples/ft80x: Fix some size calculations. Added option to
18190 - apps/examples/ft80x: Text is handled by the coprocessor and, hence,
18192 - apps/examples/ft80x: Fix some errors in co-processor demos. Correct
18194 - apps/examples/nsh and posix_spawn: Must not call exec_setsymtab()
18195 directly. That is a non-POSIX internal OS interface.
18196 - apps/examples/ostest: Do not call AIO test without
18198 - apps/examples/smps: Fix typos in Kconfig. All power, voltage,
18199 current values were strings with no default. I assume they should
18201 - apps/examples/smps: Fixes in some printf and in Kconfig From
18203 - apps/system/zmodem: Fix Makefile.host. It was broken when zmodem.h
18209 - apps/system: Applications should use the standard clock() interface,
18211 - apps/system/stackmonitor: Fix comparison between pointer and zero
18216 - apps/netutils/netlib: Various fixes needed to get a clean netlib
18221 - apps/wireless: Applications should use the standard clock()
18224 NuttX-7.26 Release Notes
18225 ------------------------
18228 and is available for download from the Bitbucket.org website. Note
18229 that release consists of two tarballs: nuttx-7.26.tar.gz and
18230 apps-7.26.tar.gz. These are available from:
18235 Both may be needed (see the top-level nuttx/README.txt file for build
18242 - General: Eliminate use of the non-standard type systime_t and
18244 - General: Replace non critical PANIC with DEBUGPANIC to save the
18246 - General: Replace all ASSERT with DEBUGASSERT to save the code
18248 - Initialization: Add option to mount block device for
18250 - clock(): clock_systimer() is no longer a system interface. It has
18256 - clock Utilities: Move clock_timespec_[add|subtract] to
18258 - Binary Loader: Add binfmt_initialize(). All binary formats are
18259 now registered centrally vs. in board-specific logic. This
18261 - Binary Loader: Reference default symtab name to binfmt From anchao.
18262 - mm: Add mm_heapmember function and reimplement kmm_heapmember base
18265 - mm: Add {kumm/kmm}_calloc API. Add calloc API for manage user
18268 - pthreads: Add support static pthread stack. Add standard
18273 - Semaphores: Apply the semaphore wait function
18275 of nxsem_wait() that is uninterruptible and convenient for use.
18277 - Signals: Add default signal action to SIGKILL. From ligd.
18278 - Signals: Update the signal default action logic to support
18282 - Signals: Default Signal Actions. Change some types to
18284 default signal behaviors on a per-signal basis. I don't think
18285 users are prepared for SIGALRM to terminate the task (which is the
18290 - Signals: Add support for SIGINT in addition to SIGKILL.
18291 - Signals: Add logic and an interface to determine if a signal can
18293 any attempt to catch or ignore such signals (only SIGKILL for now
18295 - Signals: Add support for default signal actions for SIGSTOP,
18298 - Signals: Add nxsig_action() to solve a chicken and egg problem:
18302 - Signals: Add configuration option to selectively enabled/disable
18303 default signal actions for SIGSTOP/SIGSTP/SIGCONT and SIGKILL/SIGINT.
18304 - Signals: If a task/thread was already blocked when
18309 - Signals: Update signal default STOP action. If waitpid was
18312 - IRQs: Monitor the IRQ execution time. This is very useful for
18314 - IRQ Dispatch: Add support interrupt chains in NuttX. IRQ chain is
18318 - Work Queue: Modify high priority work queue to support multiple
18320 - System Calls: Add support for getpeername() and get_sockname()
18322 - System Calls: svcall/sycall logic needs to get the ucontext
18325 - CPU Load Measurement: Support the CPU load measurement using
18327 - Assertions: Change CONFIG_BOARD_RESET_ON_CRASH to
18331 - boardctl(): Add support for board_app_finalinitialize() From ligd.
18332 - Architecture Interface: Add prototype for an architecture-specific
18334 - Architecture Interface: Add the garbage collection hook so each
18337 - Architecture Interface: Add architecture-specific prototypes for
18342 - ProcFS: Add support for a procfs entry that will permit examining
18344 - ProcFS: Add support for proc/self/, a convenient way for getting
18346 - HostFS: Add support for open() append mode From anchao.
18347 - HostFS: Add ftruncate support. From Xiang Xiao.
18348 - HostFS: Remove ARCH_SIM dependence since other architectures
18350 - HostFS: Support remote directory names without a trailing '/'
18352 - HostFS: Add re-try when hostfs mount() fails From ligd.
18353 - NFS: Update NFS client mount to VER3 From zhangyuan7.
18354 - Partitions: Add PTABLE parser fs/partion: Add a partition parser
18356 register_blockpartition for block partition From Xiang Xiao.
18357 - MTD: Add gd25 driver From wangyanjiong.
18358 - MTD: In MTD partitions, copy the partition name to internal
18361 - MTD: Support initialization of an FTL block device with a custom
18363 - MTD: FTL: Reduce size of stack buffer from 64 to a maximum size
18365 - VFS poll(): Send poll() notification when the Tx buffer is flushed
18367 - VFS fstat(): Add file_fstat() function for internal OS use. From
18369 - VFS fcntl(): Add file_fcntl, psock_fcntl, and psock_dupsd for use
18371 - VFS dup2(): Addpsock_dupsd for use within the kernel. From Xiang
18373 - VFS poll(): Add poll use in kernel space. From dongjianli.
18374 - VFS select(): Make select be more consistent with Linux man page:
18376 empty, nfds zero, and a non-NULL timeout as a fairly portable way
18381 - Sockets: Add getpeername() support From ligd.
18382 - sockopt(): Move psock check from [get|set]sockopt to
18384 - getsockname(): Add psock_getsockname function From Xiang Xiao.
18385 - Netlink Sockets: This brings in a fragmentary, experimental
18392 - Interface Indexes: Add driver interface index support. Add
18395 support for if_nametoindex() and if_indextoname(). Includes an
18398 devices from being removed, unregistered and re-installed,
18399 re-registered and keeping the same interface index. From Gregory
18401 - Driver Interface: Add devif_loopback() to check the loopback
18404 re-inject the packet back into the network and the network driver
18406 - Network Devices: Remove all references to CONFIG_NET_USER_DEVFMT.
18414 - Network Devices: Add support for Microchip LAN91C111 driver From
18416 - Network Devices: netdev_findby_ipv[4|6]addr return
18419 - Network Device IOCTLs: Add si_ioctl callback and net_ioctl_arglen
18422 - IPv6: Rename g_ipv6_allzeroaddress with the more meaning
18423 g_ipv6_unspecaddr since the all-zero address is the IPv6
18425 tests for IPv6 multicast with common net_is_addr_mcast() macro.
18427 - ARP: arp_find() now checks if the target IP belongs to one of the
18429 - ARP: Make the function arp_find() thread-safe. It now returns a
18433 - TCP: Re-work of TCP receive window size algorithm. The new logic
18434 is based only on the ability to buffer TCP read-ahead data. From
18436 - UDP: Add support for the UDP_BINDTODEVICE protocol socket option
18438 - Slip: Uncomment the prompt of NET_SLIP_PKTSIZE in Kconfig file.
18440 - USRSOCK: Combine some the duplicated logic. From Xiang Xiao.
18441 - USRSOCK: Optimize option dependence From Xiang Xiao.
18442 - USRSOCK: Add the listen/accept/getpeername/ioctl support From
18447 - Analog DAC: Add driver for digital to analog converter DAC7571.
18448 Nucleo-L422KC: Add support for a connect DAC7571 converter. From
18450 - Audio Interface: Change member samp of apb to pointer so driver
18452 - Audio Interface: Add ioctl cmd 'AUDIOIOC_SETBUFFERINFO' so user
18453 space could config the buffer From ZhongAn.
18454 - Audio Interface: Add hardware format support From anchao.
18455 - I2S Interface: Add i2s_rxchannels and i2s_txchannels methods to
18457 - Audio: Move the I2S character driver to a dedicated folder. From
18459 - Audio: Add audio_i2s device driver. From ZhongAn.
18460 - Audio: Add the composite audio driver From Xiang Xiao.
18461 - Crypto: Move dev_urandom.c into new crypto folder. From Xiang
18463 - GPIO driver: Add gpio_pin_unregister function to GPIO driver
18464 driver/ioexpander: Add pinset struct to GPIO driver for interrupt
18468 - I2C Interface: Add a definition to distinguish a new START of
18469 messages from a repeated start. No lower-half I2C drivers actually
18473 contexts than a repeated start. Add comments to clarify setup for
18475 - I2C: Add the standard speed macros. From dongjiuzhu.
18476 - Leds: Add support to MAX7219 to control 7-segment displays. From
18478 - Power: PM: Add pm_stay and pm_relax function so special apps(e.g.
18481 - Power: PM: Add pm_querystate function From zhuguangqing.
18482 - Power: PM: Don't update the power state in work thread: (1)
18486 - Power: PM: Decrease the power state in the reverse order. Since
18489 - Power: PM: Make power manager service available as soon as
18492 - Power: PM: Add PM_RESTORE to notify driver that device exit WFI
18493 so the driver could restore state. For example, WDT may stop
18496 - Power: PM: Add timer to decrease PM level automatically. From
18498 - PTYs: Add support so that a PTY can poll for both IN/OUT event
18500 - PWM: Move pwm.c into pwm folder From Xiang Xiao.
18501 - RTC Interface: Extend struct rtc_time by adding. From Xiang
18503 - Sensors: Add support for Telair T6713 carbon dioxide sensor. From
18505 - Sensors: Add support for LSM303AGR and LSM6DSL sensors From
18507 - Sensors: Add driver for DHTxx sensor. From Ouss4.
18508 - syslog: Enable a partial, crippled version of syslog_flush();
18511 - syslog: Channel configuration. Decouple SYSLOG_SERIAL_CONSOLE and
18514 - syslog: Support pre-pending a prefix string to log output if
18517 - Serial: Add Ctrl-C/Ctrl-X support. From ligd.
18518 - Serial: Support UART direct write for non console device From
18520 - Serial: It is no longer necessary to restrict Ctrl-C handling to
18524 Ctrl-C logic. Add a signal set in the group structure to keep
18528 dispatch the signal in kernel mode for the default actions. From
18530 - Serial: Integrate new Ctrl-C logic with the ISIG flag in the
18532 - Serial: Use SIGINT instead of SIGKILL when control-C is pressed.
18534 - Serial: Add support for Ctrl-Z. This works just like the
18535 recently added Ctrl-C support except that SIGSTP is sent when the
18536 Ctrl-Z characters is encountered vs. SIGINT. From Gregory Nutt.
18537 - 16550 UART: Add a configuration, analogous to the STM32
18538 configuration option, to suppress the NuttX standard re-ordering
18539 for /dev/ttySN for special case of the 16550 UART.
18540 - 16550 UART: Add CONFIG_SERIAL_UART_ARCH_MMIO option so the a
18543 - 16550 UART: Add stub implementations of DMA-related methods in the
18544 16550 UART v-table. From ligd.
18545 - 16550 UART: Add serial termios handling From anchao.
18546 - 16550 UART: Support 16550 auto hardware flow control
18552 - syslog: Make timestamp output same as linux kernel. It's very
18554 - Timers: Add maxtimeout method to the struct timer_ops_s interface
18556 - Timers: Add a new method to the struct oneshot_operations_s
18559 - Timers: Implement timer arch API on top of timer driver. From
18561 - Timers: Implement alarm arch API on top of oneshot driver
18563 - Timers: Implement RTC arch API on top of RTC driver interface.
18565 - CDC/ECM: Adds USB device support for CDC/ECM From Michael Jung.
18566 - USB Host: Add support for the Maxim M3421E USB host driver. Not
18569 * General Architecture-Specific:
18571 - All architectures: Make sure the up_irq_enable() is available on
18576 - Simulator Configurations: Add dsptest configuration. From Mateusz
18578 - Simulator: In network driver (1) Remove up_comparemac() check for
18585 - ARM (all): Add CONFIG_DEBUG_MEMFAULT to Kconfig. From Masayuki
18587 - ARM: (1) Add semihost support for syslog, (2) Add semihost support
18588 for HostFS From Gregory Nutt.
18590 * ARMv6-M:
18592 - ARMv6-M: Introduce CONFIG_DEBUG_HARDFAULT_INFO to up_hardfault.c
18595 * ARMv7-M:
18597 - ARMv7-M: Removes support for the dedicated vector handling from the
18600 - ARMv7-M: Introduce CONFIG_DEBUG_HARDFAULT_INFO to up_hardfault.c
18602 - ARMv7-M: Implement SYSTICK timer driver From Xiang Xiao.
18603 - Simulator: Add loadable demo for arch sim. From anchao.
18604 - ARMv7-M: Add logic to trigger ARMv7-M interrupts and exceptions.
18606 - ARMv7-M: Add NVIC definitions needed by up_trigger_irq(). From
18609 * ARMv7-R:
18611 - ARMv7-R: Add general interrupt controller. This is based on
18612 ARMv7-A gic controller code. From EunBong Song.
18613 - ARMv7-R: Add invalidate dcache in arm_head.S. From EunBong Song.
18617 - XMC4 GPIO: Add a specific bit encoding to GPIO driver for
18622 - XMC4500-Relax: Add support to MAX6675 on XMC4500-Relax board.
18627 - PIC32MX: Update some PIC32MX configurations so that either the
18632 - SAMD2x/L2x: Rename all usage of samdl/SAMDL to samd2l2/SAMD2L2 to
18633 make room in the name space for samd5e5/SAMD5E5 From Gregory Nutt.
18637 - SAMD5x/E5: Add a port to the SAMD5x/E5x MCU family. From Gregory
18642 - SAMD5x/E5x SPI/I2C: Bring in untested SPI and I2C drivers from
18644 - SAMD5x/E5x DMA: Leverage the SAMD2L2 DMA controller. From Gregory
18646 - SAMD5x/E5x USB: Bring the SAMDL2 USB driver into the SAMD5E5
18651 - Metro M4: Add support for the Adafruit Metro M4 board. From
18653 - Metro M4: Add an option to build the Metro M4 image to run out of
18655 bring-up (having bricked the first Metro M4 due to a bad FLASH
18657 - Metro M4: Add a configuration option to use OSCULP32K instead of
18659 - Metro M4: After some final fixes related to the SERCOM console,
18662 - Metro M4: Verify the CMCC and enable it by default in the NSH
18667 - SAMv7 CAN: Add ability for CAN BUS_OFF autorecovery according
18668 ISO11898-1:2015. With this change we added an ioctl for triggering
18669 the autorecovery sequence for BUS_OFF to the CAN-driver and the
18670 SAMV7 low-level driver. According the datasheet: If the device
18673 by the processor (application), the device will then wait for 129
18687 - i.MXRT RTC: Add support for the i.MXRT RTC. This is code complete
18693 - i.MXRT SNVS: Add trivial SNVS from Rev 1. of the Reference Manual.
18695 - i.MXRT LSPI: IMXRT1050 LPSPI register and bit definitions added.
18697 - i.MXRT Serial: IMXRT1050 LPUART TERMIOS support added. From Ivan
18702 - IMXRT1050-EVK: Add knsh configuration. PROTECTED mode NSH build.
18707 - Kinetis: Add DMA support. From David Sidrane.
18711 - Kinetis: Use circular DMA as an option to augment the RX FIFOs in
18716 - LPC54xx: The LPC54608 can only run at a maximum frequency of
18719 board bootup failed waiting for the PLL to lock. After referring
18720 the driver from NXP, we should turn on power sources for the ext
18724 - LC823450: Add support for mpu and userspace LC823450-XGEVK: Add
18725 kostest PROTECTED build LC823450-XGEVK: Add knsh PROTECTED build
18730 - Lpcxpresso-LPC54628: Update lvgl board config to use the new
18735 - LC823450 Bluetooth: Add lc823450 Bluetooth support. From Masayuki
18737 - LC823450 I2S: Add tx start threshold to lc823450_i2s.c In
18738 addition, lc823450_i2s_send() now accepts byte-aligned stream.
18740 - LC823450 SPI: Add SPI flash driver for lc823450. NOTE: Only bus
18742 - LC823450: Change C-Buffer under-level control. The under-level
18750 - LC823450-XGEVK: Add loopback test for digital MIC on lc823450 via
18752 - LC823450-XGEVK: Add lc832450 elf test. From Masayuki Ishikawa.
18753 - LC823450-XGEVK: Add posix_spawn configuration From Masayuki
18758 - STM32 L4: Add initial support to STM32L4+ chips From Juha Niskanen.
18759 - STM32 H7: A partial port to the STMicro STM32H7 by Simon Laube was
18766 - STM32 F0, F1-F4, F7, L4, H7: Added Single Wire Kconfig variable.
18768 - STM32 DAC: Set OUTEN bit for DAC1CH2 and DAC2CH1 power/motor.
18771 - STM32 F1-F4 ADC: Allow multiple channels without DMA on
18773 - STM32 F1: Add FLASH register definitions for F1 parts that have
18775 - STM32 F2: Added progmem interface support for STM32 F2 From
18777 - STM32 F4: Ports STM32 LTDC and STM32 DMA2D to use the
18779 - STM32 F7: This change ports Marco Krahl's STM32F4 framebuffer
18780 overlays for the LTDC and DMA2D into the STM32F7. That driver was
18782 - STM32 F7: Port input capture from stm32. From Juha Niskanen.
18783 - STM32 F7 FLASH: Ported the STM32 F2/F4 driver to the STM32 F7
18785 - STM32 F7 SDMMC: Add SDIO card support to SDMMC driver. From
18787 - STM32 F7 Serial: Previous logic would invalidate the data cache as
18792 - STM32 F7: Add up_stackcheck.c From Daniel Agar.
18793 - STM32 F7: Port the low-level PM functions to STM32 F7. From Juha
18795 - STM32 L4: STM32L4 has fetchadd and testset From Juha Niskanen.
18796 - STM32 L4: Added custom pin mapping for STM32L4X2XX processors.
18798 - STM32 L4 FLASH: stm32l4xrxx: allow board to override flash wait
18800 - STM32 L4: Some updates to analog peripherals ADC, COMP and DFSDM
18801 for STM32L4XR From Juha Niskanen.
18802 - STM32 L4: Add getstatus and getperiod() method to the timer
18805 - STM32 H7: Remove old references to RXDMA. Add configuration
18806 - STM32 H7: Remove old references to RXDMA. Add configuration
18811 - STM32F103 Minimum: Add blackpill LED support From Russ Webber.
18812 - Viewtool-STM32F107: Add a TCP performance test using
18814 - Viewtool-STM32F107: Add support for the MAX3421E to the
18815 Viewtool-STM32F107 board support From Gregory Nutt.
18816 - STM32F334-DISCO: Use a PID controller from libdsp in the BuckBoost
18818 - STM32F4-Discovery: Remove STM32F4BB dependence from RNDIS; add
18820 - STM32F4-Discovery Add board support for MAX7219 as numeric display
18822 - Olimex-STM32-P407: Add kernel ELF (kelf) configuration. From
18824 - Olimex-STM32-P407: Add a kmodule configuration that can be used
18825 for testing installation of kernel modules in the protected build.
18827 - Olimex-STM32-P407: Add logic to support initialization of the
18831 - Olimex-STM32-P407: Add board support for the DHTxx sensor. From
18833 - STM32F476G-DISCO: Add support for STM32F746G-disco board LCD.
18835 - STM32F476G-DISCO: Add a configuration to build working nxdemo
18837 - STM32F476G-DISCO: Add support for STM32F746G-disco board SDRAM
18838 Changed fb config to use SDRAM. From Marcin Wyrwas.
18839 - STM32F476G-DISCO: Add touchscreen support and a LittlevGL demo for
18840 STM32F746G-DISCO From Marcin Wyrwas.
18841 - Nucleo-L476RG: Add support for an external SPI-driven SD card on
18842 the Nucleo-L476RG. From Gregory Nutt.
18843 - Nucleo-L476RG: Add support for LSM303AGR and LSM6DSL sensors From
18845 - Nucleo-H743ZI: Use Nucleo Virtual console as default console in
18847 - STM32L4R9-DISCO: Add stm32l4r9ai-disco support. From Juha Niskanen.
18848 - B-L475E-IOT01A: Add timer driver support. From Goden Freemans.
18852 - libc endian: Add support for endian.h. From Gregory Nutt.
18853 - libc net: Add inet_aton() From Juha Niskanen.
18854 - libc netdb: Add getaddrinfo() and friends. From Juha Niskanen.
18855 - libc termios: Add lib_cfmakeraw.c From Masayuki Ishikawa.
18856 - libc stdlib: Add implementation of random() and srandom(). From
18858 - libc unistd: Add a crippled version of daemon(). From Gregory Nutt.
18859 - libdsp: All floats with f-sufix libdsp: (1) add precision option
18860 for library, (2) add debug option for library and assertions in
18861 functions, (3) add current samples correction for SVM3, (4) add
18865 - include/nuttx/compiler.h, include/poll.h: Add logic to determine
18868 - include/nuttx/mutex.h: Add inline wrapper functions to more
18870 - include/nuttx/nuttx.h: Added nuttx.h header file which is
18873 - include/queue.h: Add dq_tail marco From zhuguangqing.
18874 - include/stdio.h: Add prototypes for popen() and pclose(). Actual
18876 - include/sys/param.h: Add a dummy sys/param.h header file. This is
18882 - nuttx/tools/kconfig2html.c: Due to new usage, tool needs to be
18885 - nuttx/tools/kconfig2html.c: Update tool to handle tristate types.
18887 - nuttx/tools/Config.mk: Add function CATFILE definition. Currently
18889 - nuttx/tools/Config.mk: Add the recursive wildcard function,
18890 RWILDCARD, to Config.mk. From Gregory Nutt.
18891 - nuttx/tools/testbuild.sh: Add an option to specify the location of
18893 - nuttx/tools/refresh.sh: Add a --prompt option that will let you
18894 use --silent but will prompt before overwriting the original
18896 - nuttx/tools/link.sh. Update link.sh per suggestions by Mark so
18898 - nuttx/tools/mkexport.sh: Save the System.map file and User.map
18901 - nuttx/tools/mkexport.sh: Save the name of the STRIP tool too. From
18903 - nuttx/tools/nxstyle.c: Add capability to detect multiple blank
18905 standard fixes to server .c files for problems found during testing
18907 - apps/tools: Add +x to mksymtab.sh. From Masayuki Ishikawa.
18908 - apps/tools/define.sh and define.bat: Move a copy of define.bat
18910 available for the import build. From Gregory Nutt.
18914 - Apps/ Build System. The apps/ build system has undergone a major
18921 - NuttX/ Build System: This change extends support for the two-pass
18931 application-generated kernel symbol tables. For an example of the
18935 board-specific logic in, say, configs/<board>/src would have to be
18936 included to make use of the application-installed symbol tables.
18938 - Remove CONFIG_ARCH_CALIBRATION. It is awkward to use and no longer
18941 - Build System: With recent changes to apps/ all configurations that
18944 - Build System: Add dynamic application loadable support. From
18946 - Build System: Add configuration CONFIG_ARCH_GNU_NO_WEAKFUNCTIONS
18949 - Kconfig: Move 'option modules' from NSH_FILE_APPS to
18951 - apps/ Build System: Introduce a build system for loadable apps
18952 for nsh. Add 'option modules' to NSH_FILE_APPS so that a user can
18954 - apps/import: Add Makefile.symtab which can be used to compile the
18960 - apps/nshlib: Add parsing support for back-slash quoted
18964 - apps/nshlib: Add inverted logic support in the form of 'if !
18966 - apps/nshlib: Expand reboot and poweroff commands to include a
18968 - apps/nshlib: Add a force flag (-f) to mksmartfs command. SmartFS
18971 - apps/nshlib: NSH prompt string is now configurable. nsh> is
18973 - apps/nshlib: Add control-C support for terminating built-in and
18975 - apps/nshlib: Call BOARDIOC_FINALINIT after start-up script (or
18976 immediately after BOARIOC_INIT is there is no start-up script).
18978 - apps/nshlib: When using waitpid() to wait for a built-in
18981 waited-for task is stopped as well. From Gregory Nutt.
18985 - apps/builtin/Makefile. This commit changes apps/builtin to search
18993 - apps/examples/calib_udelay: Add tool for calibrating
18995 - apps/examples/dhtxx: Example for the DHTxx sensor. From Ouss4.
18996 - apps/examples/dsptest: Add unit test for NuttX DSP library From
18998 - apps/examples/elf: CROMFS and ROMFS configuration currently only
19002 - apps/examples/elf: If the test ELF files are on media in
19006 - apps/examples/fb: Adds example to test framebuffer overlay From
19008 - apps/examples/gps: Add GPS example using MINMEA lib From Alan
19010 - apps/examples/i2sloop: Add i2sloop application. This application
19013 - apps/examples/lvgldemo: Update LVGL to version 5.1.1 From Alan
19015 - apps/examples/module: Add support for CROMFS and for stripping
19017 - apps/examples/module: Add support for automounting removable media.
19018 This involves a wait for the block driver to become available
19020 - apps/examples/module: When built in the PROTECTED or KERNEL
19029 - apps/examples/ostest: Add a small test for SIGSTOP, SIGCONT, and
19031 - apps/examples/popen: Add a test of popen/pclose. From Gregory
19033 - apps/examples/powerled: Add arch initialization. From Mateusz
19035 - apps/examples/tcpblaster: Add TCP performance measurement test.
19040 - apps/system/cle: Usage improvements including command line
19041 history (taken from readline) and support for addition control
19043 - apps/system/i2c: Adapt to rename I2C_M_RESTART->i2C_M_START.
19045 write-read and write-write message sequence. From Gregory Nutt.
19046 - apps/system/i2c: Allow registers besides 0x00 in the dev command.
19048 - apps/system/nsh: Add logic to automatically register an
19051 - apps/system/nsh: The symbol table name and size variable names
19053 - apps/system/nsh: Move apps/examples/nsh to apps/system/nsh. It
19056 - apps/system/nxplayer: Refactor nxplayer.c. Apply
19059 - apps/system/nxplayer: Release buffer before session and release
19061 Remove & for apb->samp reference. It is already a pointer. From Xiang Xiao.
19062 - system/nxplayer/nxplayer.c: Add playraw command From ZhongAn.
19063 - apps/system/nxrecorder: Add nxrecorder application From ZhongAn.
19064 - apps/system/popen: Add an implementation of the standard popen()
19068 - apps/system/system and popen: Adapt so that these can be used in
19072 NSH command. For the case of system(), this change was more
19076 - apps/system/taskset: Add taskset command for SMP systems. This
19078 For example,
19080 nsh> taskset -p 4
19083 nsh> taskset -p 3 4
19086 nsh> taskset -p 1 busyloop &
19089 - apps/system/zmodem: Support -p <path> for rz to change the folder
19090 for the received file. Switch debug output from printf to
19091 syslog. Send the next packet for ZME_ACK in ZMS_SENDING to avoid
19097 - apps/netutils/dhcpc: Activates BINDTODEVICE if available. From
19102 - apps/wireless/i8sak: i8sak daemon now gets shutdown if not in use.
19113 - mkfatfs: Clean up some name BS_ and MBR_ refer to the same record
19115 - mkfatfs: Add definitions for the FAT boot record (FBR). From
19117 - mksmartfs: Add a check to see if the SmartFS is already
19122 - graphics/littlevg/: Update LVGL to version 5.1.1 From Alan
19127 - testing/unity: Add Unity - unit testing library from
19131 ChangeLog for the complete list of bugfixes and for additional, more
19136 - Signals: Signal handlers maybe run with interrupts enabled or
19148 - Signals: Lock the scheduler while while killing the children so
19151 - Groups: Fix a deadlock when loading an ELF From Masayuki Ishikawa.
19152 - Groups: In some circumstances, group_killchildren() could have
19155 - Posix Message Queues: mq_notify() fix - only part of struct copied
19161 - vfork(): vfork operation needs to allocate and copy the task
19166 - IRQ Dispatch: Ensure vector never points to NULL since interrupt
19168 - Work Queue: workqueues don't need set global data to zero since
19172 - Work Queue: Remove work queue polling delay to simplify the code
19174 - syslog: Fix syslog crash on 64bit simulation. From anchao.
19175 - Pipes: Write to a pipe when there are no readers from the pipe
19176 should return -EPIPE. From ligd.
19177 - System Calls: Fix 6th parameter type of posix_spawnp in
19179 - System Calls: Remove unused SYS_nnetsocket from syscall.h. Because
19182 - Binary Loader: Refactor binfmt_exec.c. This change also fixes an
19183 argv issue for CONFIG_SCHED_ONEXIT=n or CONFIG_SCHED_HAVE_PARENT=n
19185 - Binary Loader: Re-architect the way that loadable ELF or NXFLAT
19188 the death-of-child SIGCHLD signal to perform the unload. There are
19195 - ELF Binary Loader: Set priority level to default if parent has no
19200 - Auto-mounter: Ignore return values from work_cancel(). From
19202 - SmartFS: Fixed filesystem corruption when writing to small file
19204 - SmartFS stat(): A previous change added support for checking if a
19206 way that breaks smartfs file-type stat flags. CROMFS is similarly
19209 not a good idea to use NuttX sys/stat.h bit-field values directly
19211 - HostFS: Update duplicated definitions in HOSTFS that must match
19213 - HostFS: Ensure f_type is equal to HOSTFS_MAGIC. From Xiang Xiao.
19214 - ROMFS: Make romfs_devread32 more portable From anchao.
19215 - TmpFS: Correct logic in tmpfs_ioctl() that extracts the priv state
19219 - ProcFS network statistics: Was not handling the output correct for
19221 - ProcFS IRQs: Fix occasional computation error when fracpart >=
19226 - TAP/TUN: Fixed custom tun devname formatting. From Dmitriy Linikov.
19227 - Network Drivers: This change attempts remove some long standard
19230 include the size of the Ethernet header. For clarity, I changed
19231 the naming of most things called MTU to PKTSIZE. For example,
19241 the IP header and TCP header sizes (for the case of TCP). Now it
19242 is derived for the PKTSIZE by subtracting the IP header, the TCP
19246 - netdev: Fix.. Too many calls to net_unlock() From Gregory Nutt.
19247 - IPv6: There are many different checks for IPv6 multicast
19254 - ARP: Fix some backward logic in an if condition. From Gregory
19256 - TCP Re-assembly: Rename CONFIG_TCP_REASSEMBLY to
19263 in any context where IPv4 packets may be reassembled for multiple
19265 - TCP: Set the default TCP MSS to the value required by RFC 879 and
19269 - TCP: Fix a deadlock condition that can occur when (1) all network
19276 while waiting for the IOBs. From Gregory Nutt.
19277 - TCP: Remove g_netstats.tcp.syndrop++ from tcp_data_event() From
19279 - TCP Monitor: Fix net unlock issue when tcp close. This bug could
19281 - UDP: When sending a broadcast (or multicast) packet do not attempt
19283 the locally bound address for these cases to select the correct
19285 - UDP: Restore some legacy behavior that was lost with the
19286 implementation of CONFIG_NET_UDP_BINDTODEVICE: If no device has a
19291 returned. It works find, however, for the legacy case where only a
19293 - UDP: Fix for network byte-order issue when checking if an address
19295 - USRSOCK: Correct of semaphore usage issues. From Gregory Nutt.
19296 - USRSOCK: Fix re-definitions of struct iovec. From ligd.
19297 - ICMP/ICMPv6 Connection: Change the type of id in
19299 - ICMP/ICMPv6: Fix failure to poll ICMP socket issue. From
19304 - XBee: Fixes issue with timeouts. Timeouts were in ticks but
19307 - BCM43xx: Add missing logic to the BCM43xx IEEE 802.11 driver to
19308 poll for more Tx data after the last transfer completes. From
19310 - BCM43xx: Bring in some fixes from the 'Haywire' branch. From
19315 - Audio: Fix compile error in i2schar.c (CONFIG_DEBUG_ASSERTIONS=y)
19317 - Audio I2S: Fix bad NULL pointer check From Juha Niskanen.
19318 - Input: Fixed FT5x06 driver to correctly close (previously it
19320 - MMC/SD: Fix an error that was causing SDIO multiple block
19322 - Sensors: Increases SPI frequency in MAX6675 from 400Khz to 4MHz.
19324 - Sensors: Remove comment references to touchscreens from ADXL345
19326 - Serial: Don't overwrite nwritten unconditionally on UART write
19328 - Serial DMA: Move head/tail pointer reset to uart_recvchars_dma
19331 - Serial DMA: In DMA mode, the use of uart_disablexinit() is
19335 - Serial DMA: Fix typo error in uart_recvchars_dma() From Xiang Xiao.
19336 - 16550 UART: u16550_txempty() should check UART_LSR_TEMT to avoid
19339 * ARMv7-A:
19341 - ARMv7-A (and i.MX6): Add support for per-CPU IRQ and FIQ interrupt
19346 * ARMv7-R:
19348 - ARMv7-R: Fix some wrong configuration of program status
19349 register. PSR_E_BIT bit should be set for big endian system.
19350 PSR_A_BIT bis is set automatically as arm cortex-r4 reference
19352 - ARMv7-R: Fix some wrong MPU register definition. Change
19353 MPU_RBAR_ADDR_MASK and MPU_RACR_TEX_SHIFT mask as arm cortex-r4
19354 reference manual. Region Base Address Register 0-4 bits are
19355 reserved. MPU Region Access control register type 3-5 bits. From
19358 * ARMv7-M:
19360 - ARMv7-M, Cortex F7: Add a configuration to enable workaround for
19364 completes, it takes effect immediately and no exceptions of lower
19373 - ARMv7-M: MPU: mpu_log2regionceil needs take into account the
19375 - ARMv7-M MPU: The prototype of mpu_log2regionfloor() changed; an
19382 - XMC4 SPI: XMC4 SPI was working only for the first transfer From
19387 - SAMv7 MCAN: Correct an error in the BUS_OFF reporting. In case of
19394 - LPC43xx CAN: Fix lpc43 CAN configuration. Configuration settings
19397 - LPC43xx: Make WWDT usable again. LPC43xx WWDT driver was not
19404 - kinetis: USB0 fix interrupt storm on error. The ERROR bit of
19407 - Kinetis: SDHC fix SDIO driver so that DMA works. There were 2
19411 complete. The second problem is that Software Reset For DAT Line
19412 SDHC_SYSCTL[RSTD] clears the bits 24-0 in SDHC_PROTO this looses
19414 - Kinetis: (1) PIT add Lifetime and Chaining, (2) flexcan fix
19416 format with parity fix. The 9-bit data mode is typically used with
19422 - Kinetis: I2C ensure timeout on bus error. The code had a dead
19429 - i.MXRT Ethernet: I finally got the Ethernet CRC32 to work properly
19431 functions for multicast address filtering, (2) Do not reset PHY
19438 - LC823450-XGEVK: Fix parallel build on lc823450-xgevk. This change
19443 - LC823450-XGEVK: Change IOB related params for rndis. Since TCP
19450 - STM32 F7: Fix compile error caused by intentional use of fall
19455 - STM32 F1-F4: Port Bob Feritich's change to STM32 F2 and F4 which
19458 - STM32 F1-F4, STM32 F7, and STM32 L4: The STM32 RTC driver was
19460 correct. For example, if you want to disabled the STM32 RTC and
19466 - STM32 F3 I2C: Fix compile error with I2C reset. From Juha
19468 - STM32 F7 Serial: Fix ioctl TIOCSSINGLEWIRE The TRM notes that UE
19472 before writing HDSEL, then re-enables it if necessary. From Kurt
19474 - STM32 F7 DMA: DMA macros did not account for the increase from 8
19476 - STM32 F7 I2C: I2C reset Configure I2C pins as GPIO output. Pins
19479 - STM32 F7: All of the SDMMC pins were set to 50 MHz, but not the
19483 - STM32 F7: Port Bob Feritich's change to SDMMC2 and to all other
19486 - STM32 F7 SDMMC: Fix data timeout errors with multi-block
19488 - STM32 L4: Corrects some mistakes in pin definitions for the
19492 - STM32 L4: Avoid using redundant CONFIG_STM32L4_STM32L4X2. This is
19496 Also enable ADC for CONFIG_STM32L4_STM32L4X5 (untested, but same
19498 - STM32 H7 Serial: don't include stm32_dma.h From raiden00pl.
19502 - STM32F4-Discovery: Fix pca9635pw LED driver compilation on
19503 STM32F4-Discovery. From Alan Carvalho de Assis.
19504 - STM32F4-Discovery: Krassimir Cheshmedzhiev claims that sys/types.h
19507 - STM32F4-Discovery: Missing EXTERN(_vectors) in linker script.
19509 - Nucleo-L422KC: Fix RAM size; STM31L4x2xx has only 64Kb of RAM.
19510 Remove references to I2C and SDIO: There is no I2C2 or SDIO on the
19512 - Nucleo-L422KC: Fix stm32_userleds. After change LD2 to LD3 in
19514 - Nucleo-L422KC: Fix TIMx clock configuration. Also removes
19517 - Nucleo-L452RE: Fix TIMx clock configuration. This is cloned from
19518 similar change to the Nucleo-L422KC. Also fixes DAC build
19520 - B-L475E-IOT01A: Fix copy paste errors in names:
19521 stm32_bringup->stm32l4_bringup. Noted by Freemans Goden. From
19523 - STM32VL-Discovery: Changed the status LED to be the green one as
19524 mentioned in the README file. Removed the global array for buttons
19525 and replace it with the only button. Improve defconfig for the nsh
19530 - libc audio: Call nxsem_destroy in apb_free. From Xiang Xiao.
19531 - libc netdb: The 'port' argument to the static alloc_ai() function
19535 - libc netdb: Fix a link error in lib_gethostbynamer.c with protected
19539 - libc unistd : Fix backward conditional logic in Kconfig. From
19541 - include/nuttx/compiler.h: Fix warning: __cplusplus is not defined.
19544 - include/nuttx/fs/binfs.h: Fix warning: Type defaults to 'int' in
19546 - include/nuttx/net/ethernet.h: Remove CONFIG_NET_ETHERNET guard
19548 - include/nuttx/semaphore.h: don't include nuttx/fs/fs.h. (1) Avoid
19551 - include/crc64.h: Fix warning: integer constant is too large for
19553 - include/limits.h and include/sys/types.h: Fix warning about
19555 to '-' used whete '_' intended. From Xiang Xiao.
19556 - include/spawn.h: Fix posix_spawnattr_destroy warning: 'the
19558 - include/sys/types: Move wint_t and wctype_t from wchar.h to
19562 - apps/include/netutils/netlib.h: Eliminate a warning about
19567 - Build System: Fix parallel build in making context. This change
19571 - Kconfig files: Fix several errors noted by Alex Denisov in
19573 - apps Build System: Fix an error when building apps/ without
19578 Instead, for this build case, I have not thought of any option but
19580 Also added a top-level target to compile the symbol table. Misc
19583 - apps/Application.mk: If a loadable module is generated the we
19589 - nuttx/tools/Makefile.unix: Was not cleaning up export directory
19591 - apps/tools: Fix an error in mksymtab.sh From Masayuki Ishikawa.
19595 - apps/nshlib: Fix 'while' and 'until' loop condition The loop
19601 - apps/nshlib: I was able to cause an assertion with some typos in
19604 - apps/nshlib: Increase the default configuration for the maximum
19606 This is needed for 'mount' with the -o option. From Xiang Xiao.
19607 - apps/nshlib: Do not dereference NULL 'pstate' in nsh_console.c.
19612 - apps/examples: Remove illegal calls into OS to initialize BINFMT
19615 - apps/examples/nettest: Fix typo: NET_LOOPBACK ->
19617 NET_SETSOCKOPT for preventing compilation error. From EunBong Song.
19618 - apps/examples/ostest: Signal handling tests should use the same
19621 - apps/examples/ostest: Attempt to make the nested signal test
19625 - apps/examples/smps: Fixes in some printf and in Kconfig. From
19630 - apps/system/cu: (1) Protect from possible re-definition of signal
19631 values, (2) Fix CU ctrl-C hand when remote core hang. From ligd.
19632 - apps/system/i2c: Fix a backward comparison in i2c_main.c. Noted
19634 - apps/system/nsh: Fix compile errors with
19636 - apps/system/ping and ping6: Send ID and seqno in network byte
19638 - apps/system/ping and ping6: Change dependency in ping and ping6
19642 - apps/system/system: Add 'const' to make function prototype
19644 - apps/system/zmodem: Fix error "sz_main.o: No such file or
19649 - apps/netutils/ftpc: Fix handling of url-encoded strings From
19651 - apps/netutils/ping: Remove unsupported ping. netutils/ping is not
19652 supported anymore. It's better to remove this folder for
19658 - apps/wireless/wapi: Remove dependency on CONFIG_EXPERIMENTAL from
19663 - apps/gpsutils/minmea: Include wchar.h in minmea.c file to fix
19668 - Remove apps/interpreters/micropthon. There are several reasons
19669 for this. (1) the current version 1.3.8 is very old and no one is
19676 https://bitbucket.org/nuttx/nuttx/issues/104/build-micropython-138-error.
19677 With no one dedicated to the support of micropython, it can no
19680 NuttX-7.27 Release Notes
19681 ------------------------
19684 and is available for download from the Bitbucket.org website. Note
19685 that release consists of two tarballs: nuttx-7.27.tar.gz and
19686 apps-7.27.tar.gz. These are available from:
19691 Both may be needed (see the top-level nuttx/README.txt file for build
19698 - Assertions: Add 'BOARD_ASSERT_RESET_VALUE' in config/Kconfig and
19701 - Assertions: up_registerdump capture the general register if not yet
19704 - Assertions: up_stackdump() dump the full stack if stack overflow the
19706 - binfmt/ and libs/libc: Make exepath_*() more common: Move
19709 - CLOCK: Support CLOCK_MONOTONIC in clock_getres.c. From Xiang Xiao.
19710 - Clock Timekeeping: Use clock_basetime() to initialize
19714 - exit(): Add SCHED_EXIT_KILL_CHILDREN option to kill all child threads
19716 - IOBs: Add an IOB notifier that will notify any registered threads
19720 - Memory Manager: In mm_free(), add DEBUGASSERT()'s to catch memory
19722 - Memory Manager: Add debug option CONFG_MM_FILL_ALLOCATIONS to fill
19724 - sched/signal and syscall/: Add support for pselect() and ppoll()
19726 - Task Groups: group_foreachchild() now iterates in reverse order since
19729 - WDOG Timer: Improve accuracy of wd_gettime() in tickless mode From
19731 - Work Queues: Add a generic notification facility that runs on a work
19733 an event via callbacks. This API is for use within the OS only. From
19738 - FAT: Add CONFIG_FAT_LFN_ALIAS_HASH to speed up creating long
19748 - FAT: Add CONFIG_FAT_LFN_ALIAS_TRAILCHARS alternative format for 8.3
19749 filenames. Traditional format for long filename 8.3 aliases takes
19751 NuttX will instead take first 6-N and last N characters to form the
19752 short name. This is useful for filenames like "datafile12.txt" where
19755 - FAT: if block driver wait seems to be a long one, give time for other
19757 - file_open(): Add file_open() implementation with some fully-function,
19760 - MX25LF25635F: Add support to Macronix MX25LF25635F serial NOR flash
19762 - nx_open(): Add nx_open() which is the same as open() except that it
19764 variable. Change most other, non-controversial calls to open() to
19766 - file_ioctl(): Replace calls to ioctl() in the OS to file_ioctl().
19768 - mount: Add mount() support for file systems that require MTD drivers
19770 - mount: Add support for mounting a file system with either a block or
19772 - MTD FTL: Support BIOC_FLUSH ioctl From Xiang Xiao.
19773 - MTD FTL: Make READAHEAD and WRITEBUFFER work independently of each
19777 - MTD FTL: Allocate eblock only when it's really needed From Xiang Xiao.
19778 - MTD FTL: Add support support unlink operation to avoid the memory
19780 - MTD Partition: Add register_mtdpartition() for MTD partition From
19782 - MTD Partition: Remove the hard code partition name length From Xiang
19784 - MTD Proxy: Make MTD device accessible via a character driver proxy
19786 - ProcFS: Change output of the ProcFS 'env' file so that it looks more
19788 - ProcFS: Add support to provide MLD statistics at /proc/net/mld. From
19790 - ProcFS: Remove MTD ProcFS and mtd_procfsoperations() since we can now
19792 - ProcFS: Add /proc/version support to get version info From iuhaitao.
19793 - ProcFS: Add support for named MTD drivers in the pseudo file system.
19796 - R/W Buffer: Don't queue work to flush write buffer if
19798 - R/W Buffer: Improve the rwb_read/write overlap performance From
19800 - SIM HOSTFS: Support S_IFSOCK, DT_LNK, O_DIRECT and O_SYNC From Xiang
19802 - SPIFFS: Brings in a NuttX port of version 0.3.7 of Peter Anderson's
19807 - Network Configuration Add new configuration CONFIG_NET_MCASTGROUP.
19812 - Network Device: Add notification logic for the case where the network
19814 - Network Device: Rename netdev_dev_lladdrsize() to netdev_lladdrsize()
19817 - ARP: Redesign ARP table aging to simplify the net initialization
19819 - ARP: Check ifname match before sending packet. From Xiang Xiao.
19820 - ARP and ICMPv6: Double the delay time on each iteration for ARP/ICMP
19822 - ICMP/ICMPv6: Add NET_ICMP[v6]_NO_STACK for usrsock case From Xiang
19824 - ICMPv6: Encapsulate the link scope address generation into
19826 - ICMPv6: Remove the coupling between ICMPv6 and Ethernet by moving all
19829 - ICMPv6 MLD: Implement Multicast Listener Discovery (MLD) protocol based
19831 - ICMPv6 MLD: Implement MLDv1 compatibility mode. From Gregory Nutt.
19832 - ICMPv6 MLD: Implement 'Other Querier Present Timer'. This timer is
19833 used to revert to Querier mode if there is no other querier on the
19835 - IGMP: Backport some MLD design improvements/fixes. From Gregory Nutt.
19836 - IPv4 setsockopt(): Add implementation for all IPv4 socket options that
19838 - IPv4/6 Socket Options: Add framework to support IPv4 and IPv6
19842 - ICMPv6 Autoconfiguration: Don't take the network device down when
19846 network be in the "down" state when re-configuring the network
19848 The ICMPv6 logic here runs with the network locked so there can be no
19854 - IPv6 Input: Add logic to skip over the variable number of IPv6
19858 have, at a minimum, a Router Alert Hop-by-hop extension header.
19861 - IPv6 Neighbor: Simplify the neighbor table aging process From Xiang
19863 - IPv6 Neighbor: Simplify neighbor_dumpentry() implementation From
19865 - IPv6 Neighbor: neighbor_lookup() checks if the target IP belongs to
19867 - IPv6 Neighbor: Support neighbor_out() for multiple link layer at the
19869 - IPv6 setsockopt(): Implement the IPV6_JOIN_GROUP and IPV6_LEAVE_GROUP
19871 - TCP: Extend the TCP notification logic logic so that it will report
19873 - SLIP: Add IPv6 support and fix minor issue From Xiang Xiao.
19874 - TCP: Add TCP poll() logic to receive notifications when IOBs are
19876 - TCP: In TCP backlog, add SOMAXCONN definition and implementation per
19878 - TCP/UDP: Extend send()/sendto() logic it also requires that at least
19880 - TCP/UDP: Add notification logic when TCP or UDP read-ahead data is
19882 - TUN: Call ipv[4|6]_input dynamically by checking packet header and
19887 - Broadcom IEEE 802.11: Add capability for Broadcom chips to get
19888 firmware and CLM data from a mounted file system vs. in-memory data
19890 - XBee IEEE 802.15.4: Add support for setting/getting tx power. From
19895 - GPIO: Support multiple registrations of GPIO signal events. From
19897 - INA226: Add INA226 device driver. From Daniel P. Carvalho.
19898 - MAX7219: Support all digits presented in the MAX7219 datasheet. From
19900 - MLX90614: Add support for the Infrared Thermometer MLX90614 From
19902 - RTC Driver: up_rtc_set_lowerhalf call clock_synchronize() for
19904 - SYSLOG: Uncomment the g_syslog_channel->sc_flush call in
19906 - SYSLOG: syslog_initialize initialize dev/syslog too and call syslog
19908 - USB Composite and DFU drivers: Add support for Microsoft OS
19909 descriptors. These Microsoft-only descriptors help in loading the
19913 Windows 10 with dfu-util 0.9 and libusb 1.0.22. On Windows 7 it still
19915 - USB DFU Device: Add DFU Runtime driver for activating boot-loader
19917 - USB RNDIS Device: Account for CONFIG_NET_GUARDSIZE in allocation of
19920 - USB RNDIS Composite Device: Fix strid comparison. Add support for
19925 - PCBLOGIC-PIC32MX: Remove support for the PCB Logic PIC32MX board. I do
19931 - i.MXRT: Added support for the i.MXRT 106x family. From David Sidrane.
19935 - i.MXRT: Add LPI2C driver. From Ivan Ucherdzhiev.
19936 - i.MXRT LPSPI: Add full support for the LPSPI in poll mode; includes a
19937 minor fix for LPI2C.
19938 - i.MXRT USDHC: Initial commit of the i.MXRT SDHC driver working in PIO
19940 - i.MXRT USDHC: Complete the interrupt driven USDHC1 functionality for
19946 - IMXRT1060-EVK: Add support for the IMXRT1060-EVK. From David Sidrane.
19950 - Olimex-LPC1766STK: Add support to initialize a USB HID keyboard. Add
19951 a configuration for testing the HID keyboard. From Gregory Nutt.
19955 - LC823450: MPU support for FLAT build From Masayuki Ishikawa.
19959 - STM32: Add support for STM32F303xD/E. From Mateusz Szafoni.
19960 - STM32 L4: Add initial support for STM32L412 and STM32L422 chips From
19965 - STM32 ADC: Major refactor: Use STM32 ADC IP core version and ADC
19968 core version headers. Configurable sample time supported for all
19969 chips, not just L1. Enable/disable interrupts supported for all
19972 - STM32 PWM: Improvements in STM32 PWM low level driver: Support
19973 complementary outputs, dead-time configuration, output polarity and
19975 - STM32 PWM: Break and lock configuration and some cosmetics From
19977 - STM32 SPI. Enable separate DMA per SPI configuration From Daniel Agar.
19978 - STM32 F7 FLASH: Allow programming OTP blocks through progmem
19980 - STM32 H7 I2C: Add I2C support for STM32H7. From raiden00pl.
19981 - STM32 H7 RCC: Update RCC definitions, add SPI clock configuration and
19983 - STM32 H7 SPI: Add basic SPI support for H7. Enable SYSCFG clock in
19988 - Nucleo-F302R8: Add support for Nucleo-F302R8 board From raiden00pl.
19989 - Nucleo-F302R8: Add PWM support. From Mateusz Szafoni.
19990 - Nucleo-F303ZE: Add basic support for nucleo-f303ze. From Mateusz
19992 - Nucleo-F303ZE: Support for ADC and ADC example. From Mateusz Szafoni.
19993 - Nucleo-L432KC: Added support for AT45DB Serial Flash From Daniel P.
19995 - Nucleo-L432KC: Add support for the INA226. From Daniel P. Carvalho.
19996 - Nucleo-H743ZI: Add NRF24L01 support. From Mateusz Szafoni.
19997 - Olimex-STM32-P407: Add a HID keyboard configuration. From Gregory
19999 - STM32F4-Discovery: Add MLX90614 support for the STM32F4-Discovery
20001 - STM32F429I-DISCO: Add PWM support. From Mateusz Szafoni.
20002 - STM32F429I-DISCO: Support for ADC and ADC example. From Mateusz
20007 - MIPS32 Toolchain.defs: Add toolchain flags for the pinguino toolchain
20010 * RISC-V:
20012 - RISC-V GAP: This commit brings in support for the GAP8 architecture.
20013 The GAP8 is a 1+8-core DSP-like RISC-V MCU. Also included is support
20014 for the Gapuino GAP8 evaluation board. From hhuysqt.
20018 - tools/tesbuild.sh: No longer installs and builds the NxWidgets
20023 - include/net and include/sys: Align the constant values with values in
20026 - include/netdb.h Add NO_ADDRESS definition From zhangyuan7.
20027 - include/netinet/in.h: Adds definitions for IPPROTO_IPV6 socket
20029 struct ipv6-mreq. These changes all follow the opengroup standard for
20031 - include/netinet/in.h: Add IPv4 SOL_IP socket options for symmetry
20034 - include/netinet/in.h: Add other definitions required by
20036 - include/netinet/in.h: Add Linux IP_PKTINFO and IPV6_PKTINFO
20038 - include/nuttx/net/ipv6ext.h: Create header file with all of the
20041 - include/nuttx/net/mld.h: Add MLD header file based on RFC2710 and
20043 - include/sys/socket.h: With increased size of struct sockaddr_in6, the
20048 - libs/libc/misc: Add implementation of CRC8-CCITT. From Alan Carvalho
20050 - libs/libc/modlib: Add per-module library symbol table support. From
20052 - libs/libc/net: Add basic implementation for recvmsg() and sendmsg()
20054 - libs/libc/netdb: A few improvements to getaddrinfo: (1) Use the
20057 - libs/libc/netdb: Make DNS receive timeout configurable. From ligd.
20058 - libs/libc/stdio: Eliminate recursive in conversion functions of
20060 - libs/libc/string: Add some new functions defined in POSIX.1-2017:
20062 - libs/libc/string: Add memrchr() function From Xiang Xiao.
20063 - libs/libc/string: Make strerror() return the string "Success" for
20068 - Makefile.unix/win: Remove deletion of Eclipse project files from make
20070 - apps/Application.mk: Fix some build issues. (1) Unable to found
20073 - apps/Directory.mk: Fix distclean targets. Makefiles were not
20074 removing generated Kconfig files. There was then no way to remove
20080 - apps/nshlib/, apps/examples/: Update to show newer file system
20082 - apps/nshlib: Add support for the 'env' command. From Gregory
20084 - apps/nshlib: Add support for NSH local variables if
20091 - apps/nshlib: If CONFIG_NSH_VARS=y, the NSH 'set' command with no
20097 - apps/examples/gpio: Align with GPIO driver update From wangyanjiong.
20098 - apps/examples/ina226: Added INA226 example From Daniel P. Carvalho.
20099 - apps/examples/mld: Add a test of MLD. Provides a mechanism for some
20100 low-level bring-up of MLD. From Gregory Nutt.
20101 - apps/examples/mlx90614: Add mlx90614 test example From Alan Carvalho
20103 - apps/examples/mlx90614/: Include support to change device address on
20105 - apps/examples/fstest: Adapt the existing fstest example for SPIFFS:
20106 For SPIFFS, add garbage collection and file system integrity IOCTL
20112 - apps/examples/tcpblaster: Add an option to use poll() to pace input
20114 - apps/examples/tcpblaster: Select CONFIG_LIBC_FLOATINGPOINT
20117 - apps/examples/udpblaster: Add option to use poll() on output (only).
20122 - apps/system/ping and apps/system/ping6: Set optind to zero in the
20124 -W <timeout> and -s <size> option. Decouple the output from ping
20126 - apps/system/ping and pings and apps/netutils/ping: Extract icmp ping
20127 and icmpv6 ping6 logic from system/ to C-callable library in
20129 - apps/system/progmem: Remove this utility. It makes illegal direct
20134 - apps/netutils/netlib and apps/examples/igmp: Adapt to use the
20135 corrected, semi-standard version of struct ip_msfilter. From Gregory
20137 - apps/netutils/chat and apps/examples/chat: 'constify' chat variables
20142 - apps/wireless/ieee802154/i8sak: Properly shuts down event thread.
20144 - apps/wireless/ieee802154/i8sak: Fixes i8sak name. Accidentally renamed
20146 - apps/wireless/ieee802154/i8sak: Adds support for getting/setting
20151 - apps/graphics/NxWidgets: Move the NxWidgets repository into the apps/
20157 - apps/graphics/NxWidgets: Add CNxString string + operator and
20161 - apps/graphics/NxWidgets: Add CLabelGrid control for displaying text
20165 ChangeLog for the complete list of bugfixes and for additional, more
20170 - Clock: Remove g_monotonic_basetime and g_clock_monotonic_time since
20174 - Clock: Don't call up_timer_gettime in clock_gettime() and
20177 - Clock Initialization: clock_inittime() needs to be done with
20179 clock_inittime() for external RTC case since the RTC isn't ready yet.
20181 - IOBs: Work around some issues with the IOB throttle semaphore. It
20185 - IOBs: iob_navail() was returning the number of free IOB chain queue
20188 - PM: Use the start time of state btime to calculate thrcnt; remove the
20190 - PM Uninitialization: Fix pm_domain_s.stime un-initialize caused time
20192 - sched_kfree() and sched_ufree(): This patch prevent heap corruption
20194 change forces all de-allocations via sched_kfree() and sched_ufree()
20195 to be delayed. Eliminating the immediate de-allocation prevents the
20196 problem with the the re-entrant semaphore because the deallocation
20199 - sigsuspend(): sigsuspend() shouldn't eat the pending signal but
20201 - task_restart(): Was restarting tasks with all signals set in the
20204 - unsetenv(): Fix and error in unsetenv() when un-setting the last of
20206 - waitpid(): Remove a bad error check. From Gregory Nutt.
20210 - FAT: Fix file data corruption in fat_truncate(). From Petteri Aimonen.
20211 - Partitions: Try MTDIOC_GEOMETRY IOCTL before bops's geometry.
20213 - MTD Progmem: Change up_progmem_npages() to up_progmem_neraseblocks().
20214 page is a unit for read/write operation. eraseblock is a unit for
20220 - R/W Buffer: Fix a lock issue From Xiang Xiao.
20221 - SmartFS: Current sector should have a space for next entry size. If
20226 - 6LoWPAN: Fixes bug in uncompress_addr handling of odd postfix. This
20230 - ARP and ICMPv6: Don't call d_txavail directly since it may point to
20232 - ICMPv6: icmpv6_neighbor() shouldn't use the out of scope
20234 - IPv6 input: Fixes logic in ipv6_input to handle more than ff02::/16
20237 - IPv6 Input: Fix a logic error when the received IPv6 srcaddr is a
20241 - TCP: In TCP recv window calculations, in order to receive data we
20247 - TCP: Fix compiler error and warning when CONFIG_NET_SENDFILE=y From
20249 - TCP Input: Fix recovery when ackseq > unackseq. The comment near
20252 It was changed to the current form in commit f034d84ea1f with no
20255 - TCP Write Buffering: Fix buffer release handling on failed buffer
20257 buffer alloc and tryalloc failed to wrb->wb_iob assertion. From Harri
20259 - TCP/UDP: In the POLLOUT poll logic, request an immediate Tx poll from
20261 - UDP: On a failure to find the destination device, fallback to
20265 - USRSOCK: Revert previous commit to re-allow combination of usrsock
20266 and NuttX TCP/IP stack. For example, in case device has Ethernet and
20270 - USRSOCK accept(): Mark newconn ready before issue accept request to
20276 - Broadcom 802.11 Driver: There were two functions that have a address
20280 - Broadcom 802.11 Driver: Remove incorrect OR condition. Always true.
20282 - NRF24L01: Fix compilation errors. From Mateusz Szafoni.
20286 - ALARM Upper Half: Fix alarm ISR error when no CONFIG_SCHED_TICKLESS
20287 drivers/timers/arch_alarm.c: Use uint64_t to avoid alarm 32-bit
20289 - MAX11802: Fix compilation errors and allow setting PULL and SAMPLE
20291 - S25FL1: During a MTDIOC_GEOMETRY ioctl call, the driver was
20295 - SYSLOG: nx_syslog's return value should include the timestamp length
20297 - SYSLOG: syslog_putc() calls sc_force in idle task even if interrupt
20303 - SYSLOG: Ensure interrupt log doesn't interlace in normal log. Don't
20306 - UART 16550: Fix UART flow control issue. UART_MCR_RTS need be high
20308 - USB RNDIS Device: Fix buffer overrun check in rndis.c. The rndis
20314 * ARMv7-A:
20316 - ARMv7-A: Replicate the same fix was previously committed for the
20317 ARMv7-R. From Gregory Nutt.
20319 * ARMv7-R:
20321 - ARMv7-R: Fix error in cp15_flash_dcache. Change mcrne to mcr for
20324 * ARMv7-M:
20326 - ARMv7-M Interrupts: Correct all ARMv7-M architectures. Interrupts
20328 SET-ENABLE registers has no effect. In order to disable interrupts,
20329 it is necessary to write all ones to the NVIC CLEAR-ENABLE register.
20334 - BCM2708 Serial: Juha Niskanen's fix related to STM32
20340 - Qemu i486: Correct .bss, IDLE stack, heap organization. From Gregory
20345 - LPC43 Ethernet: Fix Ethernet TX_EN pin definitions. TX_EN on LPC43xx
20347 P0.1 was hard-coded for MII and PC.4 was hard-coded for RMII. Also,
20350 - LPC43 Serial: Fix copy-paste error: g_usart1port->g_uart1port. From
20352 - LPC43 SDMMC: Fix the LPC43 family SDMMC card access: Clocks were
20353 wrongly configured, way too fast because there is no primary divider
20357 - LPC43 SDMMC: Corrected a problem in lpc43_dmasendsetup(). There was
20358 no linked DMA descriptor code on the send side. The end result was
20361 - LPC43 SDMMC: With these changes the SDMMC card for LPC43 is now
20364 possible for data to still be in the FIFO (i.e. not have reached the
20365 card) when a next write is requested, so we need to wait for that to
20367 episode to the next, corrupting progress. Multi-descriptor DMA
20372 - Bambino-200E: Correct calculation of SDMMC clock configuration. The
20373 LPC43 has no SDMMC source clock divider. Error noted by Dave
20378 - Kinetis: Remove all attempts to reprioritize interrupts. From Gregory
20383 - Kinetis I2C: I2C On failed reset re-initialization I2C and clocking.
20385 subsequent transfers will not cause a hard-fault due to the clock
20388 - Kinetis Serial: Juha Niskanen's fix related to STM32
20394 - i.MXRT Ethernet: The board would not come up if I ran NuttX from cold.
20396 PHY was coming up in NANDTree mode. This is a mode for testing
20399 - i.MXRT Ethernet: Fix a race condition in setting up the Ethernet Tx
20401 - i.MXRT Ethernet: Corrections for the i.MXRT Ethernet: (1) Now the
20402 Ethernet is completely re-initialized when an error occurs by means of
20404 renegotiated for that case because that is very time consuming and an
20405 error in the Ethernet is no reflection on the state of the PHY
20407 could be moved into the config rather than searching for it which
20408 takes ages, and it's zero anyway for this board (that's the broadcast
20410 so that would be a new board). (3) Allows for the renegotiation of
20411 the PHY to be optional when a reset is needed. If a non-renegotiated
20413 be escalated to a renegotiated one. (4) Only performs a reset for
20418 anyway. (5) Re-loads the multicast table on reset. (6) Adds a bit
20420 - i.MXRT LPI2C: Fixes 2 bugs in the for IMXRT1050: (1) I2C time out and
20423 - i.MXRT LPSRTC: SVNC LPCR register bits 0 & 1 are NOT reserved and
20426 - LPC54 SDMMC: Add support for and SDMMC errata. It appears that now I
20429 - LPC54 SDMMC: Ported Dave Marples fixes LPC43 SDMMC to the LPC54.
20431 - i.MXRT WDOG: Typos in bit definitions, wdog registers are 16 bits,
20437 - i.MXRT: clockconfig bug fix: Fixed logic that was not clearing bits
20445 - IMXRT1050-EVK: Previous committed implemented SPI-based MMC/SD card
20447 implementation of MMC/SD card support using the SDIO-based
20449 and conditions using the SPI-based support on CONFIG_MMCSD_SPI which
20455 - LC823450: Fix up_allocate_heap() in lc823450_allocateheap2.c. For
20458 text area in SRAM. See ld.scripts for details. Also, this change
20463 - EFM32 Serial: Juha Niskanen's fix related to STM32
20466 - EFM32 USB Device: The epin_configure() function used the same eptype
20467 as the TxFIFO number for all endpoints. This should probably be the
20473 - STM32* SPI: Don't rely on SPI_CR1_SPE to determine if peripheral has
20474 been initialized. This change is needed specifically for the case
20480 - STM32 F0, F7, H7, L4 Serial: Fix use of CONFIG_SERIAL_IFLOWCONTROL
20482 - STM32 TIM: Don't use hard-coded UIF interrupt in some functions.
20484 - STM32 (FS/HS), STM32F7, and STM32L4 OTGFS/HS Device: The
20486 for all endpoints. This should probably be the physical EP number,
20488 - STM32 F2: Fixes Kconfig options to include all STM32F20XX processors,
20491 - STM32 F4 DAC: STM32F407VG has only one DAC. NDAC=2 causes
20494 - STM32 F7 Serial: Force invalidation of data cache after DMA re-enable
20495 when returning from low-power mode From Juha Niskanen.
20499 - B-L475E-IOT01A: Correct timer source clock frequencies. From Freemans
20501 - Nucleo-L432KC: Fix SPI pin definitions in board.h. From Daniel P.
20506 - CP0 Definitions: Fix some copy-paste errors that cause malformed
20509 - microMIPS: Reported by Anonymous in Bitbucket Issue #129: When MIPS
20510 port is built for microMIPS and then loaded as an application, the
20514 was built for microMIPS.
20518 - PIC32MZ Startup: In pic32mz-head.S, initialize the global pointer in
20523 - PIC32MZ Serial: Fix a typo in assignment of TTYS0 to UART6 From Ouss4.
20527 - SIM Network Driver: Fix error 'invalid operands to binary &' From
20532 - Fix typographical error in endian.h and resource.h From anchao.
20533 - include/net/if.h: Adds extern "C" guard in include/net/if.h From
20535 - include/netinet/in.h: Per OpenGroup.org, type of sin_port in struct
20538 - include/nuttx: Fix definitions used to access OS functions within the
20542 for the OS but corrects some problems at the user interface. Noted by
20544 - include/nuttx/clock.h: Fix uptime wrong if DEBUG_FEATURES and
20546 - include/nuttx/fs/fs.h: Fix some backward parameters in a new macro
20548 - include/nuttx/fs/fs.h: Register_mtddriver should depend on CONFIG_MTD
20550 - include/sys/socket.h: Renumber the socket types. They must begin at
20551 1, not zero. Socket type zero has a special meaning for some
20552 interfaces. For example, getaddrinfo() uses a socket type of zero to
20553 many any type of socket. The is no standard name for the
20554 any-type-socket, but macOS uses SOCK_UNSPEC. NuttX will do the same.
20557 - libs/libc: Correct some errors in psignal() and stpncpy(). From
20559 - libs/libc/math: Add variable convergence in log() and logf() to avoid
20560 hangs caused by failure to converge for very specific input values.
20563 - libs/libc/stdio: Fix conversion for format specifiers in sscanf() that
20570 - libs/libc/stdio: Remove CONFIG_NOPRINTF_FIELDWIDTH. That option
20573 non-standard. Removing this might break some of the tinier platforms
20574 but it is the best thing to do for long term maintenance for for
20576 - libs/libc/stdio: Update to vsprintf(). This resolves the integer
20577 field width problem if Issue 35 for the cases of integer, long and
20580 - libs/libc/string: Correct the return pointer value from stpncpy() for
20582 - libs/libc/string: Fix strrchr() so that it considers null terminator
20584 - libs/libc/wqueue: Eliminate a race condition noted by Xiang Xiao.
20586 - libs/libnx/nxfonts: Fix kerning of 'I' in Sans17x22 font. From
20588 - libs/libnx/nxfonts: In nxfonts_getfont(), avoid unnecessary warnings
20589 for other whitespace chars also. From Petteri Aimonen.
20590 - libs/libnx/mxmu: NXMU now re-validates window pointer for mouse
20596 - libs/libnx/nxtk: nxtk_bitmapwindow: Fix warning message when bitmap is
20597 fully off-screen. From Petteri Aimonen.
20601 - Fix issue with libcxx build. This was changed multiple times, but
20603 - configs/Makefile and tools/Config.mk: Move single file copy to the
20605 there is no cp or cp does not recognize Windows paths. From Anatol
20607 - tools/Config.mk and tools/Makefile.win: Force use 'cmd' for shell
20609 - tools/Directories.mk: Correct the path to the installed libcxx
20611 - tools/Makefile.win/unix: Staging directory (and its libraries) should
20615 - apps/Directory.mk: If the current directory contains a Kconfig file
20618 - apps/Makefile: Fix Windows native build patch extension. From Anatol
20623 - tools/Config.mk: Fix an error in RWILDCARD implementation From
20625 - tools/configure.c: Add missing '\n' in printf statement
20626 - tools/configure.c: Add missed -g option to getopt() string. From
20628 - tools/configure.c and tools/configure.sh: Fix Windows native
20629 pre-build kconfig-conf incompatibility. From Anatol Ivanov.
20630 - tools/csvparser.h: Extend MAX_PARMSIZE to 256. Fixes this issue:
20632 - tools/link.bat: Fix .fakelink creation. From Anatol Ivanov.
20633 - tools/mkdeps.c: Fix '\0' missing with MinGW. From Anatol Ivanov.
20637 - apps/nshlib: Correct maximum number of arguments that can be provided
20639 - apps/nshlib: Add fflush to nsh_consolewrite(). This resolves this
20642 uses nsh_consolewrite() and that uses fwrite with no fflush. We can
20645 - apps/nshlib: nsh_catfile() should not append '\n' if the last char in
20647 - apps/nshlib: Fix warning g_oldpwd defined but not used
20648 [-Wunused-const-variable] in nsh_envcmds.c. From Xiang Xiao.
20652 - apps/examples/adc/Kconfig: CONFIG_BOARDCTL_ADCTEST does not exist
20654 - apps/examples/webserver/Kconfig: The webserver "app" allows for DHCP
20656 contain EXAMPLES_WEBSERVER_DHCPC config. Based on patch from
20661 - apps/system/hexed: Fix memory leak From zhuyanlin.
20662 - apps/system/i2c: Fix i2c_msg freq initialization problem. Typo
20665 - apps/system/system: Fix warning when passing argument 6 of
20667 [-Wincompatible-pointer-types] From Xiang Xiao.
20671 - Correct some network-related configuration variable names. All *_MTU
20674 - apps/netutils/netlib/netlib_parsehttpurl.c: Correct handling of long
20677 - apps/netutils/codecs: "dst" overflow protection when base64 string
20679 - apps/include/netutils/ipmsfilter.h: Eliminate error generated by bad
20680 pre-processor logic. From Gregory Nutt.
20684 - apps/graphics/NxWidgets: Fix garbage returned when
20689 NuttX-7.28 Release Notes
20690 ------------------------
20693 and is available for download from the Bitbucket.org website. Note
20694 that release consists of two tarballs: nuttx-7.28.tar.gz and
20695 apps-7.28.tar.gz. These are available from:
20700 Both may be needed (see the top-level nuttx/README.txt file for build
20707 - Critical Section Monitor: Adds data collection logic in support of
20708 pre-task monitoring critical sections and pre-emption state. From Gregory
20710 - Critical Section Monitor: Add support for global pre-emption and
20713 - Interrupt Time: Measurement of interrupt handler duration used to
20717 interrupt duration calculation to use the same high-resolution,
20718 platform-specific timer as is used with the Critical Section Monitor.
20720 duration in non-Tickless mode, and (2) in either mode, the interrupt
20722 high-resolution timer and should, therefore, never be any discrepancy
20724 - Context Switching Protection: Add debug assertions before each call
20725 to up_block_task() to assure that there is no attempt to block an
20727 - init Task: Allow the init task priority to be configurable. From
20729 - pthreads: Implement pthread_key_delete(). This involves some minor
20734 - ProcFS: Extended the process ID ProcFS output to show per-thread
20735 maximum time for pre-emption disabled and maximum time within a
20737 - NXFFS: Pass unrecognized IOCTL commands to the contained MTD
20739 - LittleFS: Adds an initial port the ARM mbed littlefs to NuttX. This does
20742 - AT25 MTD Driver: Added support for AT25DF081A serial flash chip.
20744 - MTD Configdata Device: Extends the MTD configdata device with the
20746 1. Configurable option to use named config items instead of enumerated
20749 /dev/config device.
20751 4. Ability to perform "flash_eraseall" on the /dev/config device.
20756 - Telnet Driver: Add NAWS and poll interface to telnet for screen size
20761 - BLE HIC Core: Add second RX work function From Lwazi Dube
20762 - BLE IOCTL Commands: Add SIOCBTCONNECT and SIOCBTDISCONNECT ioctl
20764 - CC2564: Add cc2564 HCI UART driver. From Lwazi Dube
20768 - Sitronix ST7032i: Add support to Alphanumeric Sitronix ST7032i
20770 - NXP TDA19988: This commit brings in a complete, but untested,
20771 implementation of a driver for the TI TDA19988 HDMI Encoder. This encoder
20777 - crypto/aes.c: This change provides an improved AES cipher API in
20778 addition to the existing routines. The reasons for this new API are:
20779 1) better performance, giving the possibility to avoid re-setting-up
20780 the key for each AES block when the same key is used multiple times.
20781 This is important for the current single user of AES, which is
20782 related to storage and FTL. And 2) suitable for simultaneous use of
20785 is no need to change anything else right now. From Sebastien Lorquet
20789 - MMCSD SDIO: The mmcsd_sdio driver makes calls for dcache
20796 invalidate store-into mode dcaches after the DMA transfer. I
20797 have been using SDIO_DMADELYDINVLDT() for several weeks now and
20799 non-cache aligned buffer invalidation errors (for my store-through
20801 for store-into mode dcaches.
20806 - SPI Lower Half Interface: Extend the HW features supported by SPI.
20809 - DS28E17 1-Wire Driver: Optimize I2C write followed by read to same
20811 - LMP92001: Add support for the TI LMP92001 Multi-channle DAC/ADC
20813 - EEPROM Character Driver: Add support to Microchip AT24CM02 From
20815 - Microchip MCP73871: Add support to Microchip MPC73871 Battery Charger.
20817 - MCP7941x: Add support for the Microchip MCP741x external RTC. From Ouss4
20818 - Sensirion SCD30: Driver for Sensirion SCD30 CO2 sensor. From Jussi
20820 - Sensirion SGP30: Driver for Sensirion SCD30 gas sensor. From Jussi
20822 - Sensirion SPS30: Driver for Sensirion SCD30 particulate matter sensor.
20824 - USB CDC/ACM Device: When implemented usb cdc on nrf52840, I found
20827 2. Low-water mask implement issue;
20828 3. Re-flush cdc buffer when enabling
20834 - Configuration System: Allow Penguino for windows for the Windows
20839 - MAX32660: Support for the MAX32660 was added (along with partial
20840 support for other members of the MAX326xx family). The initial port
20842 and UART. Additional untested drivers are complete and ready for
20848 - MAX32550-EVSYS: Basic support for the Maxim Integrated MAC3X660
20850 fully functional. Includes unverified support for an SPI0-based
20855 - SAMD21/L21: Adds a complete ADC header file for SAMD21 and a partially
20856 complete ADC header file for the SAML21. From Alexander Vasiliev
20857 - SAMD21/L21: Export sam_i2c_master_initialize(int bus) to be used by
20858 board config. From Alan Carvalho de Assis
20862 - PIC32MZ I2C: Add support for the I2C bus. From Ouss4
20864 * ARMv7-A
20866 - ARMv7-A MMU: Use TLBIMVA vs TLBIMVAAIS to invalidate the Cortex-A8
20869 * ARMv7-M
20871 - Cortex-M7 Cache: This commit adds a new function
20875 used as a a direct replacement for arch_invalidate_dcache(). From
20877 - ARMv7-M: In the current implementation we only use very high
20878 priority interrupts (levels 0, 0x10 and 0x20 in CORTEX-M speak) but
20883 for interrupts to be defined above (or, indeed, below) them as needed
20884 by the application. This should have no functional effect on
20890 - BCM2708: Remove all support for the BCM2708/2835. This was added
20891 only for support of the RaspberryPi Zero board which was previously
20897 - Raspberry Pi Zero: Remove the partial support for the Raspberry Pi
20904 - Improve LED handling #if~#endif in nrf52_autoleds.c and
20908 Add nrf52-generic
20910 Copy from nrf52-pca10040 to nrf52-generic
20915 - i.MXRT: Add PIT, GPT, and QIMER(TMR) header files From David Sidrane
20916 - i.MXRT: Add FLEXPWM. From David Sidrane
20917 - i.MXRT: Add ADC chip header From David Sidrane
20918 - i.MXRT Build: Include up_systemreset and up_stackcheck.c From David Sidrane
20919 - i.MXRT GPIO: Add GPIO Support Input daisy selection. From David Sidrane
20920 - i.MXRT Serial: Support independent input and output flow control. From
20922 - i.MXRT USB: Use single define for USB pin definitions. From David Sidrane
20923 - IMXRT106X: Add FLEXCAN3 to pinmux header file. From David Sidrane
20927 - IMXRT1050-EVK: GPIO device driver support added and tested by
20932 - LPC23450: Add support for SPI flash boot. Also, remove unnecessary
20933 code for the SPI flash boot. From Masayuki Ishikawa
20937 - LC823450-XGEVK: Add linker script for SPI flash boot. From
20939 - LC823450-XGEVK: Enable NFS client for RNDIS configuration. Also, some
20944 - Critical Section Monitor: Add low level timer support for simulation. From
20949 - Configuration: Simplify ARM core selection logic From Mateusz Szafoni
20950 - Configuration: USB Host is an option. From David Sidrane
20951 - STM32 L0: Brings in initial support for the STM23 L0. From Mateusz
20956 - STM32 ADC: Configurable ADC DMA mode (one shot mode, circular
20958 - STM32 ADC: Start conversion on startup is now possible if TIM
20960 for ADC IPv2 when opening ADC device.
20961 - STM32 DAC: Unified naming for DAC interfaces From Mateusz Szafoni
20962 - STM32 DMA: Add interfaces to interact with high priority DMA
20964 - STM32 DMA: Use STM32 DMA IP core version instead of chip family
20966 - STM32 DMA: Add support for DMA v1 CSELR support. From Mateusz Szafoni
20967 - STM32 HRTIM: Do not enable timers on startup if option from Kconfig
20970 - STM32 PWM: Add timer enable/disable and frequency update to
20971 low-level ops. From Mateusz Szafoni
20972 - STM32 SPI: Implements the new deferred DMA trigger feature. From
20974 - STM32 F0 Build: Rename the stm32f0 directory to stm32f0l0 to make a
20975 space for STM32 L0. Rename files, functions and defines, removing
20978 - STM32 F0 GPIO: Add support for GPIO EXTI. From Mateusz Sfafoni
20979 - STM32 F2 FLASH: stm32_flash_writeprotect() supported the same for
20981 - STM34 F7 DMA: stm32f7 enable separate DMA per SPI configuration
20983 - STM32 F7 QEncoder: Ported the QEncoder from F4 to F7. From Eduard
20985 - STM32 F7 SPI: Port Dave Marples STM32 deferred trigger enhancement
20987 - STM32 H7 SPI: Port Dave Marples STM32 deferred trigger enhancement
20989 - STM32 L4 SPI: Port Dave Marples STM32 deferred trigger enhancement
20994 - B-L072Z-LRWAN1: Add basic support for b-l072z-lrwan1. Nucleo boards
20995 use as default ST LINK MCO as clock input from MCU and for this
20997 - Nucleo-F103RB: Add board support. From Mateusz Szafoni
20998 - Nucleo-F103RB: Add ADC and PWM examples. From Mateusz Szafoni
20999 - Nucleo-F207ZG: Add board support. From Mateusz Szafoni
21000 - Nucleo-F207ZG: Add ADC and PWM examples. From Mateusz Szafoni
21001 - Nucleo-F302R8: Add high priority ADC interrupts example to the
21003 - Nucleo-F334R8: Add support for ADC injected sequence to the 'highpri'
21005 - Nucleo-F334R8: Add example for the SPWM generation (custom STM32 PWM
21007 - Nucleo-F767ZI: Use on board USB UART as default console. Board is powered
21008 by USB which can be used as UART link for upload and console. Previously
21011 - Nucleo-F767ZI: Add ethernet config based on nsh configuration plus
21012 stm32f769i-disco/nsh-ethernet. From Phil Coval
21013 - Nucleo-L073RZ: Add basic support for nucleo-l073rz. Nucleo boards
21014 use as default ST LINK MCO as clock input from MCU and for this
21016 - Nucleo-L152RE: Add board support. From Mateusz Szafoni
21017 - STM32F4 Discovery: Add timing support for the critical section
21019 - STM32F4 Discovery: If the Critical Section Monitor, modify the
21022 - STM32F4 Discovery: Add board support to display ST7032i From Alan
21024 - STM32F4 Discovery: Add loadable application build support in
21026 - STM32F4 Discovery: Update RNDIS configuration: (1) Add NFS and adjusted
21027 stack size for usermain and telnetd client. (2) Add support for loadable
21029 - STM32F4 Discovery: Update nsh configuration: (1) Add
21032 - STM32F429I-DISCO: Add high priority ADC interrupts example to the
21034 - configs/nucleo-l073rz: Support for nrf24l01. From Mateusz Sfafoni
21038 - CC13x0 family and CC13x2/CC26x2: Basic, minimal support was added
21039 for these two chip families. This is a Work-In-Progress: There is
21042 TI ROM-based 'DriverLib'. As a result, the support is not fully code
21043 complete and is totally untested. Support for the CC26x2, which is
21049 - LAUNCHL-CC1312R1: Board support is available for the TI
21050 LAUNCHL-CC1312R1. That board support consists only of an unverified
21051 NSH configuration. The primary purpose of this port for the time
21052 being is simply support the core architecture bring-up.
21056 - AM335x: Adds initial support for the TI AM355x family.
21057 - AM335x: Add minimal wdog logic needed to disable the watchdog timer.
21060 - AM335x: Switch to DMTimer2 for system tick generation. U-Boot does not
21066 - Beaglebone Black: Initial port for BeagleBone Black board support
21067 (TI AM335x family based on Cortex-A8). Includes a basic functional NSH
21072 - LM3S9B92: Add support for LM3S9B92. From Lwazi Dube
21076 - Tiva HCI UART: Port bluetooth HCI uart interface from stm32 to tiva
21081 - TM4C1294-Launchpad: Add IRQBUTTONS support to tm4c1294 launchpad.
21086 - tools/convert-comments.c: Add a tool to convert C++-style comments
21087 to C89 C-style comments. From Gregory Nutt
21088 - tools/detab.c: Add detab.c which will convert all tabs in a file to
21090 - tools/lowhex.c: Add lowhex.c that will convert hexadecimal constants
21092 - tools/mkconfig.c: Add definitions to distinguish between tristate
21094 - tools/nxstyle.c: Add logic to detect long lines. From Gregory Nutt
21095 - tools/nxstyle.c: Add -h for help. From Gregory Nutt
21099 - include/nuttx/lcd/edid.h: Add EDID definitions From Gregory Nutt
21100 - libs/libc/netdb: Make DNS retries configurable From Juha Niskanen
21101 - libs/libc/netdb: Harden query logic against DNS spoofing. This
21102 commit implements most of the RFC 5452 guidelines for making DNS more
21108 - libs/libc/netdb: Support multiple IP addresses per hostname From
21113 - apps/nshlib: Add support to use SLCD as NSH Console From Alan Carvalho de
21115 - apps/nshlib: Add support for CROMFS start-up script. From David Sidrane
21116 - apps/nshlib: Add var expansion in NSH parse. From Daniel Agar
21117 - apps/nshlib: Display built-in apps using multi-column mode like the NSH
21119 - apps/nshlib: In all multi-column help output, calculate an optimal column
21120 width rather than using a hard-coded width that may or may not be
21123 - apps/nshlib: Adds addroute command options for setting default gateway.
21128 - apps/examples/battery: Add Battery Charger Monitor Example From Alan
21133 - apps/system/configdata: Adds an "cfgdata" command which allows
21134 manipulation of the /dev/config items via the command line. One such use
21135 for this utility would be to set a "macaddr" configdata item, etc. The
21136 utility is sort-of like a u-boot env variable edit function:
21138 For instance, to set a "macaddr" when the new CONFIG_MTD_CONFIG_NAMED
21151 You can also display all config items:
21159 - apps/system/critmon: Add a daemon to monitor critical section usage. From
21161 - apps/system/nsh: Set NSH priority if the NSH task was scheduled at a
21163 - apps/system/nxplayer: Introduce CONFIG_NXPLAYER_MAINTHREAD_STACKSIZE. From
21165 - apps/system/termcurses: Addition of termcurses libraries in
21167 - apps/system/vi: New feature additions
21172 2. Standard '~' empty screen line characters for proper identification
21174 3. Moving into insert or append mode now prints '--INSERT--' in the
21179 5. Support for up, down, left, right arrows, page-up, page-down keys in
21182 command repeat value for multiple word moves.
21184 repeat value for multiple word moves.
21193 12. Added support in the 'd'elete and 'y'ank commands for character mode
21195 13. Added support in paste routine for multiple paste using command value
21197 14. Added support for the 'D' and 'C' delete and change to end of line
21199 15. Added support for 's'ubstitute key ('x' followed by insert mode).
21206 17. Support for 'P'aste before current cursor position.
21207 18. Support for '?' reverse search mode.
21208 19. Support for 'J'oin next line with current line command.
21210 21. Command repeat '.' support for commands that modify text.
21211 22. Support in replace / insert mode for arrow keys, PGUP / PGDN, HOME,
21217 26. Implemented '^' goto first non-whitespace on current line, along with
21218 '+' and '-' goto first non-whitespace on next / previous line.
21219 27. Added CR / LF goto first non-whitespace on next line in command
21224 - apps/netutils/webserver: The webserver/httpd app is was broken when script
21226 has been tracked down to the "Content-length" not being available ahead of
21227 time in this case (length of -1 passed to send_headers() ). On the other
21231 Simple solution: Add support for HTTP Chunked Encoding to webserver/httpd.
21233 encoding. When enabled, the implementation will auto-detect the cases where
21243 - apps/wireless/bluetooth/btsak: Add connect and disconnect commands to
21248 - apps/graphics/pdcurs34: Integration of termcurses into pdcurses, plus
21249 pdcurses updates for multi-thread support From Ken Pettit
21250 - apps/graphics/pdcurs34: Adds a configuration option to pdcurses to enable
21251 line-drawing character (ALTCHARSET) when using the short 16-bit chtype.
21252 This is done by limiting the characters to 7-bit ASCII values and using the
21253 8-th bit as the A_ALTCHARSET bit. This allows a significant RAM savings 4K
21254 - 20K depending on terminal size) while still allowing the nicer
21255 line-graphic characters for border drawing. From Ken Pettit
21259 - apps/testing/ostest: Add test for pthread-specific data. From Gregory
21263 ChangeLog for the complete list of bugfixes and for additional, more
21268 - Assertions: Identify the running task correctly when dumping task
21276 - Assertions: Correct duplicated logic from commit
21277 dbf01d12b7321d1b48b68d3b69842a853b049376. Checking for PID == zero
21278 is not a valid way to test for the IDLE task in all configurations!
21280 configurations, there will be a separate IDLE task for each CPU with
21283 mode to find the right stack for the CPU IDLE thread and could still
21285 - Interrupt Prioritization: Remove all driver-specific logic that may
21286 set the interrupt priority to anything but the default. There is no
21290 to be set by board-specific logic. From Gregory Nutt
21291 - Memory Management: Revert "This patch prevent heap corruption as in
21293 results in major memory fragmentation and out-of-memory
21298 - Memory Management: This is a replacement for EunBong Song's reverted
21304 non-running task be trying to get the MM semaphore? I think only in the
21309 - Memory Management: In implementation of calloc(), verify that the number of
21313 - sigtimedwait(): Remove unnecessary disable of pre-emption. From
21315 - _exit(): Update all architecture-specific _exit() implementations
21316 so that they correctly call the scheduler instrumentation layer for
21321 - sched_foreach(): sched_foreach() should not have to hold the
21326 - task_spawn(): Correct description of input parameters to
21331 - crtypo/: This change:
21346 - opendir(): Corrects a problem with opendir() noted by Petteri
21347 Aimonen in Bitbucket Issue 132: "opendir() fails for FAT filesystem
21357 From POSIX specs for opendir(): "A pathname ... that ends with one or
21359 ( '.' ) were appended to the pathname." So for mount points,
21360 opendir() works correctly, but for FAT32 filesystem it fails to open
21364 in NSH (like 'ls -R /') because NSH contains logic to remove trailing
21366 - dup()/dup2(): dup() and dup2() were broken some time back.
21369 - ProcFS: Remove the unnecessary critical section From Xiang Xiao
21370 - CROMFS: Fix hardfault. From David Sidrane
21371 - SmartFS MTD Driver: Fix smart_write_alloc_sector sector size mapping.
21372 Was not correctly calculating the encoded sector size for small (256)
21375 - AT25 MTD Driver: Fixed missing opening parenthesis. From Marc Rosen
21376 - MTD Configdata MTD Driver: Check return value mtdconfig_readbytes().
21378 - S25FL1 MTD Driver: Minor change for the s25fl1 QSPI FLASH driver which
21383 - All network drivers! Change pre-processor logic that selects the
21387 - Socket Clone/Dup: On a failure to start the TCP monitor, the cloned
21391 - ARP: Fix whitespace after ARPHRD_IEEE80211 in ARP header file. From
21393 - 6LoWPAN: Fixes decompression of ipaddr from MAC address. The logic
21396 - 6LoWPAN: Fixes logic surrounding the Universal/Local bit. This bit
21398 bit is bit 1 of the MSB of the EUI-64. It should only be inverted in
21399 cases where there is a full EUI-64. In cases where the IID is derived
21402 https://tools.ietf.org/html/rfc4291#section-2.5.1
21403 https://tools.ietf.org/html/rfc4944#section-6
21404 https://tools.ietf.org/html/rfc2464#section-4
21406 - 6LoWPAN: IEEE802.15.4 stores and uses addresses in little endian
21408 - 6LoWPAN: Address comment regarding avoiding double lookup of address
21410 - 6LoWPAN: Record and restore d_buf on entry/exit of sixlowpan_input.
21415 - 6LoWPAN: sixlowpan_input should always return 0 if the incoming frame was
21417 - TUN Driver: Fixes a problem reported by Masayuki Ishikwawa: Recently I
21422 - Telnet Driver: Add missing logic to set read event flags in poll()
21427 - BLE: Fix uninitialized variables. From Lwazi Dube
21428 - BLE GATT header file: Fix struct name. From Lwazi Dube
21429 - BLE GATT: Remove unnecessary GATT ioctls From Lwazi Dube
21433 - ST7032: Fix seek method. Was not taking into account the offset for the
21434 SEEK_END case. Did not account for negative offsets. On errors, it was
21435 clobbering the filep->f_pos setting. From Gregory Nutt
21436 - PCF8574 Backpack: Fix seek method. Had the same problems as noted for
21441 - Button Upper Half: Fix two bad NULL checks From Juha Niskanen
21442 - PWM Interface: Remove dependency on CONFIG_PWM for the upper-half
21443 PWM header. This allows compilation for the lower-level PWM drivers
21444 even if the upper-half PWM logic is not used. From Mateusz Szafoni
21445 - Various I2C Drivers: In most I2C drivers, correct upper index value
21448 - Battery Gauge: Add missing initialization of semaphore. From Alan
21450 - Batter Charger: Add missing initialization of semaphore. From Alan
21452 - MCP73871: Fix Microchip MCP73871 Battery Charger driver to register
21456 - MCP794xx: Fix MCP794xx driver to wait for OSCRUN and fix tm_year. From
21458 - Numerous files: Fixes usage of CONFIG_BIG_ENDIAN; should be
21461 * ARMv7-A:
21463 - ARMv7-A MMU: Fix end address calculation for mmu_invalidate_region() API
21466 * ARMv7-M:
21468 - ITM: Fix missing space causing macro issues From Alan Carvalho de
21470 - Common Exception Handlers: This commit changes the lazy and non-lazy
21472 on ARMv7-m. If my understanding is correct then these interrupt
21475 would have introduced race conditions for the period of time between
21478 - MPU/Protected Mode Build: Revert "arch/arm/armv7-m: MPU:
21485 That is, the following MUST always be zero: (base & ((1 << l2size) - 1))
21492 - PIC32MX Ethernet: Fix a comparison in a debug assertion. Should be
21497 - PIC32MZ chip.h Header: Add a missing " in an error message. From Ouss4
21501 - PIC32MZ Ethernet: Fix a comparison in a debug assertion. Should be
21506 - SAMD21/L21: Corrects behavior of the I2C_M_NOSTART flag. Also adds
21507 a release a bus on RXNACK and corrects typo priv->flags to msg->flags
21508 as priv->flags is never set. From Alexander Vasiliev
21509 - SAMD21/L21: Fix SAMD2L2 arch to use calibrated oscillator value. Now
21513 - SAMD21/L21 I2C Master: Adds calculation of a timeout and disables
21518 - SAML21-Xplained: Fix removed MAXCOARSESTEP from saml21-xplained board.
21523 - SAMD51/Ex: Alexander Vasiliev's fix to the SAMD21 I2C Master (commit
21529 - SAMV7 Serial: Fix case where TTYS0 is not defined. From Ken Pettit
21533 - MAX326xx: WFI instruction in IDLE loop seems to interfere with
21534 stability. Commented out for now. Needs to be investigated further.
21539 - i.MXRT FLEXPWM: Correct duplicated definitions From David Sidrane
21540 - i.MXRT SERIAL: Fix TTYS0 defined definitions of higher numbered ports
21542 - i.MXRT LPSPI: Removed unused clock, that borked the build. From David
21544 - i.MXRT LPI2C: I2C Reset rework From David Sidrane
21548 - LC823450: Fix up_allocate_heap() in lc823450_allocateheap2.c. This
21551 - LC823450: Fix go_os_start() in lc823450_start.c. I found a bug in
21555 - Other Architectures: Masayuki Ishikawa's change to go_os_start() was
21556 also to all MCU-specific start-up functions that support
21561 - LC823450-XEVK: Fix IOB params in rndis/defconfig. These parameters
21562 work for HTTP audio streaming. From Masayuki Ishikawa
21563 - LC823450-XGEVK: Change RNDIS MAC address assignment in rndis
21565 0xaa for RNDIS host to avoid MAC address conflicts with RNDIS
21570 - LC823450-XGEVK: Fix overlapped memory settings in memory.ld. From
21575 - STM32: Remove redundant STM32 family definitions from chip.h header
21578 - STM32 ADC: There is no DMA CFG bit for the basic IPv1 ADC. From
21580 - STM32 ADC: Refactor adc_reset. It should be easier to maintain this
21582 - STM32 F0 Clocking: Fixes the problem in GPIO port clocks. Only port
21585 - STM32 F7 I2C: I2C out of bounds access on priv->msgv. Error in if
21586 statement. It was checking for msgc > 0. If message count is 1, only
21587 index 0 is valid on priv->msgv. Therefore random values in memory
21589 - STM32 H7 I2C: Applied David Sidrane's I2C fix to the identical logic
21590 for STM32 H7. From Gregory Nutt
21591 - STM32 L4 I2C: Applied David Sidrane's I2C fix to the identical logic
21592 for STM32 L4. From Gregory Nutt
21596 - STM32 ADC: Fix RCC reset logic. From Mateusz Szafoni
21597 - STM32 ADC: Fix compilation errors for chips with one ADV TIM. From
21599 - STM32 DMA: Add missing DMA channel configuration.
21600 - STM32 PWM: STM32 MOE is not being appropriately handled for PWM for
21601 advanced timers. It is only ever reset and so no PWM train is
21604 - STM32 PWM: Fix compilation errors if the upper-half PWM logic is not
21606 - STM32 SPI: STM32F446 & STM32F469 correct PC1 SPI assignments From
21608 - STM32 TIM: Fix compilation error if there is no TIM8. From Mateusz
21610 - STM32 F0: Fix GPIO EXTI lines assignment for STM32 M0. From Mateuz Szafoni
21611 - STM32 F3 I2C: Remove the extra NONE event from the trace dump
21613 - STM32 F4 I2C: Remove the extra NONE event from the trace dump
21615 - STM32 F7 I2C: Use clock_t for ticks instead of uint32_t to hold system
21617 - STM32 L4 I2C: Use clock_t for ticks instead of uint32_t to hold system
21622 - STM32F429I-DISCO: Fix lvgl demo removing STM32_FB_CMAP. From Alan
21624 - STM32VL Discovery: Fix SRAM and FLASH size in the linker script.
21628 - STM32VL Discovery: Fix memory size configuration and documentation.
21631 - Viewtool-STM32F107: Change RNDIS MAC address assignment in rndis
21633 0xaa for RNDIS host to avoid MAC address conflicts with RNDIS
21641 - Tiva LM/TM4C Start-Up: Remove option CONFIG_TIVA_BOARD_CLOCKCONFIG. It is
21646 - Tiva LM/TM4C GPIO Interrupts: Fix tiva gpio interrupts From Lwazi Dube
21647 - Tiva LM/TM4C: Improve GPIO interrupt support by removing unnecessary,
21648 hard-coded per-MCU defines and using the existing Kconfig configuration
21653 - Tiva TM4C Serial: After commit
21655 work - enter key produces garbage characters. This commit fixes the
21656 problem for me. From Lwazi Dube
21660 - include/dsp.h: Fix missing semicolon error in dsp.h From MYAPICI
21661 - include/nuttx/compiler.h: Correct support of C-version-specific features.
21662 Cannot depend on GCC version because -std=c89 may be used on comomand
21666 - libs/libc/stdio: fread() should always set EOF if fewer than the
21672 - sched/irq/Make.defs: Fix warning about irq_csection.o appearing
21677 - tools/gencromfs.c: "gencromfs.c:1171:3: warning: ignoring return
21679 [-Wunused-result]. From David Sidrane
21680 - tools/gencromfs.c: Fix build on macOS. From David Sidrane
21684 - apps/nshlib: Fixes an error in the NSH parser. There was a bug when
21686 command in the script is executed, it sets the vtbl->np.np_redirect flag
21688 the script execution. Then the vtbl->np.np_redirect flag is set when the
21689 'sh' command completes, causing a restore from un-initialized variables,
21690 thus leading to a crash. See the code snippet below for an example test
21696 nsh> mkrd -s 1024 40
21698 nsh> mount -t vfat /dev/ram0 /tmp
21707 - apps/nshlib: Fix buffer overrun when redirected to a file. SAVE_SIZE
21712 - system/system.c: Fixes build error; There is no result variable, use
21714 - apps/system/vi: Bug fixes:
21716 searching for 'nextline'. Fixed.
21732 8. The bottom line of the screen was sometimes being used for document
21733 text and other times for command / find entry. Fixed by reserving
21734 the bottom the bottom line for status / command only.
21747 with a block of characters with breaks as needed for TAB exansion.
21752 13. When in 'ex' or find sub-modes (':' or '/' bottom line modes),
21768 19. Fixed vi_shrinktext so it doesn't allocate a zero-length buffer when
21776 - apps/wireless/bluetooth/btsak: 'bt bnep0 info' outputs a reversed addr. It
21779 - apps/wireless/bluetooth/btsak: Fix some errors in btsak. From Lwazi Dube
21780 - apps/wireless/bluetooth/btsak/btsak_main.c: Fix address parsing. From
21782 - apps/wireless/bluetooth/btsak: Remove unnecessary gatt get commands. From
21784 - apps/wireless/bluetooth/btsak/btsak_scan.c: Fix reversed address. From
21786 - apps/wireless/ieee802154/i8sak: Fixes issues related to re-running
21787 daemon. Releases lock when releasing daemon. Re-sets daemon_shutdown so
21791 NuttX-7.29 Release Notes
21792 ------------------------
21795 and is available for download from the Bitbucket.org website. Note
21796 that release consists of two tarballs: nuttx-7.29.tar.gz and
21797 apps-7.29.tar.gz. These are available from:
21802 Both may be needed (see the top-level nuttx/README.txt file for build
21809 - Configuration: CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to
21810 disable the file system. NuttX with no file system does not make
21811 sense and is no longer supported. From Gregory Nutt.
21812 - Rename most internal OS functions from sched_* to nxsched_* to
21815 - Rename all internal OS functions from task_* to nxtask_* to indicate
21817 - Rename sched_process_timer to nxsched_process_timer. Rename
21820 appropriate names for an internal sched/ function (still many named
21822 - Standardize naming: Rename os_start() to nx_start(), rename os_smp*
21825 - Initialization: Remove the option CONFIG_BOARD_INITTHREAD. Now, if
21830 - Initialization: Add support for CONFIG_BOARD_EARLY_INITIALIZE. If
21831 this option is selected then nx_start() will call a board-provided
21835 - Signal Delivery: Add a flag to the TCB to indicate that we are in a
21838 guaranteed before but when locking of pre-emption during signal
21843 - Signal Handler Security: The architecture-specific signal handler
21847 which more the return address, for example, but does not make the
21849 - Timer Interrupt Procssing: Add a configurable call out to a
21850 user-provided function, 'timer hook', on each timer interrupt. From
21852 - PM Activity: Add pm_staycount() API for get stay numbers. This
21854 - Pthreads: Add support for pthread_mutex_timedlock From Leif Jakob.
21855 - Pthread Spinlocks: Add a very preliminary implementation of the new
21857 - Critical Section Monitor: Remove SCHED_IRQMONITOR_GETTIME to
21860 Don't collect timing info for all other cases. From Xiang Xiao.
21861 - Work Queue Notification: Notifier can now work with either lpwork
21863 - Protected Build: Add add a new field (us_heapend) to struct
21868 - Shared Libraries: Implement dlerror() using strerror(). From Xiang
21870 - Shared Libraries: Add LD_LIBRARY_PATH environment variable
21872 - ELF Loaders: Optimize elf load speed: (1) Don't zero out memory,
21874 - ARM ELF Relocation: Add support for the R_ARM_THM_JUMP11 relocation
21877 - ELF Modules: Add relocation buffer table to reduce filesystem
21879 - ELF Modules: Add symbol buffer table to reduce filesystem access.
21884 - Filesystem Mount: Move the union inode_ops_u i_mtd field into the
21887 - ROMFS: Add support to mount a ROMFS volume using an MTD driver
21889 - LittleFS: VFS wrapper improvement: (1) Support block device
21891 support forceformat and autoformat option, (4) update file->f_pos
21892 and dir->fd_position, (5) remove the internal struct from dir, and
21894 - UnionFS: Support mount of UnionFS from the NSH command line. From
21899 - UsrSock: Add mutual exclusion so that only user can perform a
21901 - UDP: Initialize callback address structure to avoid random values
21906 - SX127x: Initial support for SX127x LoRA radio From Mateusz Szafoni.
21910 - Graphics: Fix a naming collision: Ye olde nx_start that started
21913 - NX Server Startup: Extend nxmu_start() so that receives a display
21918 - Graphics: nx_openwindow() and nxtk_openwindow() now accept an
21920 select a RAM backed, per-window framebuffer. From Gregory Nutt.
21921 - Per-Window Framebuffers: Windows may now be optionally created
21925 of this option is that the application that manages window will no
21937 to use per-window framebuffers.
21941 - Driver Notifications: Support signal notification through
21943 RTC, Joysticsks, buttons, Zero-Crossing, wireless, FT80x, Timer,
21945 - Watchdog Driver: Support auto-monitor service From Gregory Nutt.
21946 - Timer and Alarm Drivers: Implement up_critmon_gettime and
21949 - RTC Driver: Protect the RTC state with a semaphore. From Xiang
21951 - Serial Upper Half: Call pm_activity() when characters are received
21953 - MPU60x0: Initial support for TDK InvenSense MPU6000 and MPU6050
21954 6-axis gyroscope and accelerometers. This commit supports SPI
21956 - EEPROM Driver: Add configurable SPI eeprom frequency. From
21958 - GPIO Driver: Support reading and writing gpio pins using cat and
21960 - MCP2515: Add MCP2515 clock input config to KConfig. From
21962 - MAX7456: Support for the Maxim MAX7456 on-screen-display chip.
21967 - boardctl(): up_testset() can now be accessed by applications via
21972 - boardctl(): Add support for BOARDIOC_NXTERM which can be used to
21974 - boardctl(): Add boardctl() commands to replace direct calls to
21979 - PIC32MZ Timers: Add support for the PIC32MZ timers (driver,
21984 - arch/arm: Move FPU options to a common place and unify the usage
21986 - arch/: Unify the cache interface for all architectures that
21988 - ARMv7-M/A/R: Add a architecture-specific new barriers.h header
21993 * ARMv7-A
21995 - ARMv7-A: Support thumb mode and fix interworking issue. From
21997 - ARMv7-A: Add weak attribute to arm_data_initialize so platform
21999 - ARMv7-A: Add SCR bit definitions. From Xiang Xiao.
22000 - ARMv7-A: Add mmu_l1_map_regions() to remove the code duplication.
22002 - ARMv7-A: Add the initial cortex-a7 architecture support From
22005 * ARMv7-M
22007 - ARMv7-M: stackcheck allow faulting stack calculation to make it to
22012 - SAMD2/L2: Add RS485 support to SAMD2L2 serial. From Alan Carvalho
22017 - Minerva: Add support for the Minerva architecture. From Ramtin
22022 - misoc: Add support for an NSH configuration using the Verilator
22027 - NRF52: 1. Added 52840 family support 2. Use common IRQ and memory
22028 layout header file for 52832 & 52840. From Levin Li.
22032 - NRF52 RNG: 1. added RNG device driver 2. added errdata to correct
22034 event_clear inline api for all driver. From Levin Li.
22038 - i.MXRT XBAR: Add XBAR Support. From David Sidrane.
22039 - i.MXRT USB: Add USB analog header file. From David Sidrane.
22040 - i.MXRT OCOTP: Added OCOTP Support. From David Sidrane.
22041 - i.MXRT LCD: Adds framebuffer support for the i.MXRT 1050.
22042 Includes DCD initialization for SDRAM to provide space for the
22044 3-clause license. From Johannes.
22048 - IMXRT1050-EVK: Adds framebuffer support for the i.MXRT 1050.
22053 - LPC17xx: Add a configuration option to skip over the framebuffer
22058 - Open1788: Add a configuration to test NxTerms in the PROTECTED
22060 - Open1788: Re-arrange PROTECTED mode link map to make more space
22061 for large kernels with debug enabled. From Gregory Nutt.
22062 - Open1788: Add a configuration for testing per-window frame buffers
22067 - LPCXpresso-LPC54628/pwfb: Add per-window framebuffer configuration
22069 - LPCXpresso-LPC54628: Add a configuration for addition per-window
22074 - STM32F0/L0 SPI: Add SPI support for F0. From Mateusz Szafoni.
22075 - STM32 ADC, PWM and TIM: (1) configure injected channels external
22077 context after configuration, (3) support for offset configuration,
22078 and (6) support for advanced timers channel 5 and 6. From Mateusz
22080 - STM32 DFU Mode: Add logic to reboot the STM32 in DFU mode.
22081 Current implementation only works for STM32F2 and F4. From Bill
22083 - STM32F7 LSE: Add configuration of LSE oscillator drive capability
22085 - STM32F7 I2C: Fix another memory access issue on a bus error. From
22087 - STM32F7 TIM: Add OUTTOGGLE mode for STM32f7 timer From Valmantas
22089 - STM32F7 Timer Lower Half: Add timer lowerhalf driver for stm32f7.
22091 - STM32F7 ITM: Add ITM syslog support. From Valmantas Paliksa.
22092 - STM32F7 CAN: Add CAN driver with support for three bxCAN
22094 - STM32F7 QSPI: Add stm32f7 Quad SPI support. From Valmantas Paliksa.
22095 - STM32L4 LSE: Ports Jussi Kivilinna's recent STM32F7 LSE change to
22097 - STM32H7 I2C: Apply David Sidrane's fix for the STM32F7 to the
22099 - STM32H7 DMA: Rename DMA1/2 IRQ names to match those from other
22100 STM32. Add auxiliary definitions. Add DMAMAP definitions for
22102 definitions to match other STM32 ports. Enable clock for MDMA and
22103 BDMA. Rename DMA channel definitions. Separated files for MDMA,
22104 DMA, BDMA and DMAMUX. Add missing definitions for MDMA, BDMA and
22105 DMAMUX. SPI DMA mode. Add base addresses for D1, D2 and D3
22108 - STM32H7 OTG: Initial OTG support for STM32H7 and some minor
22109 improvements. Add support for HSI48 clock. From Mateusz Szafoni.
22110 - STM32H7 Build: Initial support for protected build mode. From
22112 - STM32L4 I2C: Apply David Sidrane's fix for the STM32F7 to the
22117 - B-L072Z-LRWAN1: Add SX127x configuration. From Mateusz Szafoni.
22118 - Nucleo-F091RC: Add support for SX127x radio. From Mateusz Szafoni.
22119 - Nucleo-F091RC: Add SX127x configuration. From Mateusz Szafoni.
22120 - Nucleo-F207ZG: Add support for USB and initialize CDCACM if
22122 - STM32F429I-DISCO: Add an apps/examples/examples/nxhello
22124 - Nucleo-F446RE: Add support for the Nucleo F446RE. From Sebastien
22126 - B-L072Z-LRWAN1: Use HSI as default clock source. From Mateusz
22128 - Nucleo-L073RZ: Add SX127x configuration. From Mateusz Szafoni.
22129 - Nucleo-L073RZ: Port button logic from nucleo-f072 which appears to
22131 - Nucleo-L432KC: Add support for I2C driver initialization. From
22133 - Nucleo-H743ZI: Add support for USB and initialize CDCACM if
22135 - OmnibusF4: Initial support for the OmnibusF4 family of flight
22143 non-upstreamed, bespoke port of NuttX. No code from those resources
22145 - OmnibusF4: Add MAX7546 support. From Bill Gatliff.
22149 - CC1312R1: Code complete and builds successfully. Stalled on
22151 radio interface, but the Cortex-M0 interface is not available with
22156 - LaunchXL-CC1312R1: Add support for on-board LEDs and buttons. The
22157 LauchXL-CC1312R1 NSH Configuration is now fully functional. From
22159 - LaunchXL-CC1310: Clone LED and button support from the
22160 LaunchXL-CC1312R1. The number of LEDs and buttons as well as DIO
22165 - tools/rmcr.c: Add a tool to remove carriage returns and dangline
22167 - tools/nxstyle.c: Can now detect if the C comment closing is not on
22169 - tools/nxstyle.c: Make sure that all files begin with a comment on
22171 - tools/nxstyle.c: Add check for multiple definitions of local
22173 - tools/nxstyle.c: Beef up logic that detects multiple variable
22175 - tools/nxstyle.c: Add capability to detect CamelCase identifiers.
22177 - tools/nxstyle.c: Add logic to detect a blank line following a left
22179 - tools/nxstyle.c: Don't complain about certain lowercase characters
22180 in otherwise uppercase pre-processor identifiers: IPv6, IPv4,
22182 was a bad idea to let the door open a crack for there. While they
22188 - Makefiles: Modify tools/Makefiles to add a "Do not Edit" warning
22193 - lib_vsprintf() (Nano): Add newlib-nano lib_vsfprintf has been
22194 added and is now the default support for the printf family. This
22199 https://salsa.debian.org/electronics-team/toolchains/newlib-nano.
22200 That project is GPL overall, but the newlib-nano printf portions
22203 - lib_vsprintf() (Nano): Added support for long lont types. From
22205 - lib_vsprintf() (Nano): Added hh type modifier (without extending
22207 - lib_vsprintf() (Nano): Adds configurable support for numbered
22209 - lib_vsprintf() (Nano): Cleaned naming and allow for leading zeros
22211 - lib_vsprintf() (Legacy): Add support for %g format which, for
22214 - vscanf(): Moved vscanf logic to lib_sscanf.c Switched to stream
22216 ahead, which isn't suitable for streams, chars already read are
22218 - scanf() and fscanf(): Added scanf and fscanf based on enhanced
22220 - uname(): Add build date and time to uname output (like Linux).
22222 - strsep(): Add strsep BSD/Linux function. From Xiang Xiao.
22223 - netdb: Hostname support no longer depends on CONFIG_NET since the
22224 host name is also useful in the non-network environment.
22226 - netdb: Support the nameserver change notification then we can pass
22228 - include/fixedmath.h: Add macros for conversion between types
22230 - include/limits.h: Define NL_ARGMAX (as well as some of the other
22234 - linclude/limits.h: Add 'range 9 999999' to CONFIG_LIBC_NL_ARGMAX
22235 to Kconfig. Per OpenGroup.org, the minimum value for NL_ARGMAX is
22237 - include/nuttx/lcd/edid.h: Add extended EDID block IDs From
22242 - apps/: Follow up the kernel signal-related change in various files
22244 - apps/: Update for corrected name of standard header file. Should
22246 - apps/: The file system can no longer be disabled. Remove all
22249 - apps/: Remove/replace all conditional logic based on
22253 - apps/: Some updates due to NuttX renaming:
22257 - apps/: Graphics interfaces nx_openwindow() and nxtk_openwindow()
22262 - apps/nshlib/nsh_netinit.c: Update for changes to signal
22267 - apps/examples/ini_dumper: New example program. ini_dumper is
22270 - apps/examples/modbusmaster: Add Simple Modbus master example.
22274 for this commit. From Alan Carvalho de Assis.
22275 - apps/examples/pwfb: Added a test/example at apps/examples/pwfb
22276 that was used for initial testing of the per-window framebuffer
22278 - apps/examples/pwlines: Added another a test/example at
22279 apps/examples/pwlines that was used for further testing of the
22280 per-window framebuffer feature. From Gregory Nutt.
22281 - apps/examples/sx127x: Add sx127x demo From Mateusz Szafoni.
22285 - apps/fsutils/inih: New package. inih (INI Not Invented Here) is a
22291 - apps/netutils/codecs/: Remove the big Base64 stack array. From
22293 - apps/netutils/codecs/: Add base64_[de|en]code_length() API From
22298 - apps/system/cfgdata: Make builtin task stack size and priority
22301 - apps/system/embedlog: Update to version 0.4.0. From Michal Lyszczek.
22302 - apps/system/nxplayer and nxrecorder: Change 'int prio' to
22305 - apps/system/psmq: New package. psmq is publish subscribe message
22307 publish/subscribe way of inter-process communication on top of
22309 - apps/system/zmodem: Switch to the raw mode before transfer and
22315 - apps/testing/: Move all file system tests from examples/ to
22318 - apps/testing/cxxtest: Add a README file. From Gregory Nutt.
22319 - apps/testing/ostest: Add test of pthread_mutex_timedlock() From
22321 - apps/testing/ostest: Fix several errors in the setvbuf() test.
22323 - apps/testing/scanftest: Port of Greg King's scanf test
22328 - apps/tools/check-hash.sh: Add a tool check hash on downloaded
22332 ChangeLog for the complete list of bugfixes and for additional, more
22337 - Signals: Restructure nxsig_deliver() so that the signal handler is
22338 not called with the pre-emption disabled (or, at least no with
22339 pre-emption disabled by nxsig_deliver() itself). From Gregory Nutt.
22340 - Critical Section Monitor: Move up_critmon_* to arch.h avoid the
22342 - Assertions: Architecture-specific assertion logic should dump CPU0
22345 - Message Queues: Change 'int prio' to 'unsigned int prio'.
22350 - Timer Expiration: Fix macro SEC2TICK() 32-bits overflow by using
22352 - Kernel Memory Manager: In mm/kmm_heap/kmm_kernel.c, remove unused,
22354 - User Memory Manager: Ensure all user allocation try sbrk before
22356 - waitid(): Could exit without leaving critical section on some
22358 - IOBs: iob_allocwait() should decrease semcount manually. From
22360 - IOBs: iob_copyin() should wait for each buffer and adjust the
22363 - IOB Notifier: Don't check iob_navail in iob_notifier_setup to
22365 - IOB Debug Dump: Format the whole line before log to avoid the
22367 - SHM: Convert bytes to pages by MM_NPAGES instead of MM_PGALIGNUP
22369 - SHM: shmget() should hould call shm_extend() to allocate the
22371 - Page Allocator: mm/pgalloc: shouldn't just allocate one page
22373 - Granule Allocator: Fix the wrong data in g_1bit_info and make the
22375 - srbk(): Fix a backward conditional test. Should call
22377 - sbrk(): Pass ARCH_HEAP_VEND as maxbreak argument From Xiang Xiao.
22378 - ELF Headers: Move elf related arch function to include/nuttx/elf.h
22385 - ELF Executables: If there is an address environment
22389 - ELF Configuration: Correct libcxx exception handling by
22390 introducing the generic config(CXX_EXCEPTION and CXX_LIBSUPCXX)
22392 - ELF Loaders: Call umm_initialize as soon as possible otherwise
22398 - Crypto AES: After NuttX 7.28 crypto/aes.c would no longer
22403 - open(): Fix not returning failure for block_proxy() call. From
22405 - AIO: aio_cancel() needs to signal caller after success. Also fix
22407 - HostFS: Remove the unnecessary use of host_stat() in
22409 - LittleFS: Fix a minor issue found in code review: (1) Replace
22413 - LittleFS: VFS Lookahead should use bit unit not byte unit. From
22415 - NxFLAT: Correct a double free debug assertion. This occurs when
22421 - NxFLAT: File descriptor leaks when nxflat loading fails. From
22423 - ProcFS: Fix typo in procfs uptime logic. From Sebastien Lorquet.
22427 - Network Configuration: The setup seems to support a network
22431 - Networking: The value ERROR should never be returned from internal
22432 OS functions. That is reserved for returning values to appliations
22435 - Networking: The struct in_addr doesn't have the member sin_addr.
22436 The function lib_lo_ipv6match() is for IPv6. Correct the function
22438 CONFIG_NET_IPv6 for configuration. From Kejun ZHOU.
22439 - TCP (buffered) send: Fix assertion crash when window size is
22441 - ICMP/ICMPv6: Bind icmp callback from device to connection.
22444 - TUN/TAP Driver: Re-order all TUN/TAP driver state data. Not only
22447 causing problems because the network requires 16-bit packet buffer
22448 alignment for uint16_t accesses. This alignment problem was
22450 - TUN/TAP Driver: Packet buffer size should include the configured
22452 allocation size must be an even number of 16-bit values to preserve
22454 - Local Sockets: In local_connect(), initialize lc_result before
22456 - Local Sockets: Fixed deadlock issue by replacing nxsem_wait() with
22462 - NX Graphics: Remove naming associated with the now non-existent
22467 - NxTERM: Remove the nxterm_unregister interface. The correct way
22469 - NxTerm: Needs to clear display initially. Otherwise, garbage from
22472 - Font Cache: Fix a memory leak in the font cache. With a busy
22475 - Graphics: Nothing under graphics/ should set the errno. From
22477 - Graphics: Fix a coordinate system error in nx_filltrapezoid().
22478 When no clipping rectangle is falls, it falls back to use the
22479 entire window as for the clip. However, that window must then then
22485 - boardctl(): Fix compiling error when set
22490 - INA3221: Fix errors in INA3221 register field addresses and
22491 bitfield values. Signed value was losing its signed-ness due to
22492 use of unsigned type for register. From Ken Pettit.
22493 - Serial Upper Half: Initialize OPOST and ONLCR in uart_register.
22495 - Serial Upper Half: Don't reset the circular buffer on close since
22499 - 16550 UART: Fix error: 'g_uart0port' undeclared. From Xiang Xiao.
22500 - 16550 UART: Fix typo for UART1 flow field initialization From
22502 - CDC/ACM HCD: Fixes to the IOCTL method in recovery of UART pointer
22503 and in names of Termios-related field. From xhbm.
22504 - USB Device: Fix type for USBDEV_TRACE_INITIALIDSET in Kconfig.
22506 - TCA64xx: Fix some errors in the TCA64XX driver. From Bruno
22508 - SYSLOG RAMLog: Fix error: Conflicting types for 'ramlog_addchar'
22510 - NRF24L01: Fix uninitialized irq_work which was causing a
22513 - MCP2515: Use kmm_zalloc to allocate device state structure. Fix
22518 - arch/ Common: Remove architecture-specific watchdog.h and
22519 arm-elf.h because they are empty. The arm-elf header file was
22522 - arch/ Common: Move up_pminitialize() after timer_initialize()
22524 - arch/ Common: Align semi-hosting call style with other syscalls in
22525 architecture-specific syscall.h. From Xiang Xiao.
22526 - arch/ Common: Every file that uses serial IOCTLs (TIOC*) must
22529 - arch/ Interfaces: Rename sched_process_cpuload to
22533 * ARMv7-A:
22535 - ARMv7-A MMU: Updating the cp15_wrttb and cp15_wrdacr functions to
22537 generating errors as ARMv7-a expects the MCR/MRC instructions to
22541 - ARMv7-A: Remove inclusion pg_macros.h for armv7-a since this
22543 - ARMv7-A: Guard some assembly files if configuration not selected.
22545 - ARMv7-A GIC: Fix assemble error when including gic.h From Xiang
22547 - ARMv7-A GIC: Don't use GIC_ICDDCR_ENABLEGRP1 for GIC NONSECURE
22550 * ARMv7-R:
22552 - ARMv7-R Syscall: In arch/arm/include/syscall.h, add missing
22553 inclusion of arch/armv7-r/syscall.h for Cortex-R. From Xiang Xiao.
22555 * ARMv7-M:
22557 - ARMv7-M Initialization: As noted by Roland Takacs in Bitbucket
22558 issue 141, there is a compilation error for STM32 if CONFIG_NET and
22566 dependencies on, for example, SPI. However, this is still a proper
22569 - ARMv7-M Configuration: ARCH_HIPRI_INTERRUPT shouldn't select
22574 - ARMv7-M Vector Table: Make the default NVIC_VECTAB_TBLOFF_MASK
22578 - ARMv7-M RAM Vectors: Correct bad NVIC_VECTAB_TBLOFF_MASK
22580 Raised DEBUGASSERT in armv7-m/up_ramvec_initialize.c line: 144.
22585 - ESP32 Timer ISR: Fix backward comparison. From Gregory Nutt.
22586 - ESP32 Serial: Fix some backward arguments. Correct 2-stop bit
22591 - SAMD2/L2 Serial: SAMD2/L2 serial driver. It needs
22596 - SAM3/4 Ethernet: Port Anthony Merlino's SAMv7 fix to similar
22597 Ethernet driver for the SAM3/4. From Gregory Nutt.
22601 - SAMv7 SPI: Fix DMA Tx/Rx timeout issue. From Kevin Liu.
22602 - SAMv7 QSPI: Compile error when set CONFIG_SAMV7_QSPI_DLYBCT.
22604 - SAMv7 Ethernet: The logic for determining the number of queues for
22608 - SAMv7 Ethernet: Fixes rxdesc index logic to handle Buffer Not
22609 Available (BNA) condition. If a SOF is found, but no EOF, don't
22620 - SAMA5Dx Ethernet: Port Anthony Merlino's SAMv7 fix to similar
22621 Ethernet driver for the SAMA5Dx. From Gregory Nutt.
22625 - SAMA5D2-XULT: Move console from FLEXCOM4 to UART1. FLEXCOM4 does
22626 not work for the Arduino serial. UART1 is used with the VCOM
22631 - i.MXRT Clock Configuration: If SDRAM is activated it was only
22638 - i.MXRT GPT: Correct register offsets. From David Sidrane.
22639 - i.MXRT TMR: Fix addressing and restructure using common offset.
22641 - i.MXRT ADC: Error in offset. From David Sidrane.
22645 - Teensy-3.x: Fix a mismatch in types in defconfig. From Gregory
22650 - LPC176x Clock Configuration: The code preserves undocumented
22652 behavior for boards where developers (hopefully) know what values
22654 - LPC17xx Clock Configuration: The enable of EMC clocks has to be
22657 region of SDRAM which is used by system must not be used for heap.
22662 - LPC17xx CAN: The name can_txready clashes with NuttX CAN core
22668 - Open1788: Add missing MPU configuration option. From Gregory Nutt.
22672 - LC823450-XGEVK: Remove -nostdinc to avoid build error From
22677 - STM32: Don't try including stm32_gpio.h from within chip/*.h
22678 header files. Not only is bad style for a layered inclusion
22683 - STM32 PWM: Fix polarity and IDLE state configuration From Mateusz
22685 - STM32 ADC, PWM and TIM: (1) missing T1TRGO2 for JEXTSEL, (2) fix
22686 sample time configuration for channels. The array index for
22688 support for advanced timers channel 5 and 6. From Mateusz Szafoni.
22689 - STM32 Heap: Change 'if CONFIG_STM32_HAVE_CCM' to 'ifdef
22692 - STM32 Oneshot Timer: Fix an error introduced be a previous timer
22694 - STM32 Tickless Mode and Free-Running Timer: Apply Max's
22697 - STM32 PWM: Set CCPxP and CCPxNP bits if polarity is negative.
22700 - STM32F7 Interrupts: Add the missing macro STM32_IRQ_NIRQS used by
22702 - STM32H7 DMA: Fix AHB1 base addresses memory map. From Mateusz
22704 - STM32H7 SysTick: H7 appears to ignore the SysTick CLKSOURCE bit
22709 - B-L072Z-LRWAN1: Fix typo in SPI1 pin definitions. From Mateusz
22711 - STM32F429I-DISCO: Handle multiple calls to the LCD
22713 - STM32F769I-DISCO: Florian R. Hölzlwimmer reports that
22717 - STM32F769I-DISCO: Remove CONFIG_STM32F7_QUADSPI=y from the
22725 - AM335x Serial: Eliminate an error 'TIOCSBRK undeclared. From
22730 - strto*: In alll strto* function family, did't consume single '-'
22732 - getopt(): Add logic to reinitialize the stale context for the
22738 force the state of getopt() to be re-initialized so that it can be
22739 reused. This logic is not full proof (it would fail, for example,
22742 - sscanf(): Initialized the lastc pointer to avoid the checks for
22745 - lib_vsprintf() (Legacy): No precision specifier resulted in
22747 - lib_vsprintf() (Legacy): Correct justification for alternate forms
22749 - lib_vsprintf() (Nano): Add long long support.
22751 Code size for compile without CONFIG_LIBC_LONG_LONG shouldn't be
22753 - lib_vsprintf() (Nano): Remove CONFIG_LIBC_PRINT_MINIMAL. The
22755 for use with NuttX. For example, the output from many NSH commands
22758 - libs/libc/symtab: Remove unused symtab_findorderedbyvalue(). From
22760 - libs/libc/machine/arm: Fix the minor issue in libc arm machine
22763 - libs/libc/libc.csv: Should be locale.h not local.h. From Joao
22765 - libs/libc/libc.csv: Needed logic for correct compilation if not
22767 - libxx: Always include libxx_cxa_guard.cxx in the build for for
22770 - include/stdbool.h: Define bool only when __cplusplus isn't
22772 - include/nuttx/list.h: Added a Linux-compatible list
22774 - include/nuttx/irq.h: Fix enter_critical_section/spin_lock_irqsave
22777 - include/dlfcn.h: Correct naming of standard header file. Should
22779 - include/nuttx/nx/nxmu.h: This header file could be lethal; it
22781 - include/nuttx/compiler.h: Important fix for C++ users.
22784 inline was defined out. Good for C but bad for C++ because C++
22790 - include/nuttx/elf.h: Adds missing extern "C" __cplusplus guard.
22792 - include/poll.h: Remove un-named union from 'struct pollfd'. It
22795 - libs/libc/Makefile, libs/libnx/Makefile, and mm/Makefile: Remove
22796 obj-path MKDEPS option since make dependency target (MT) is not
22798 - include/nuttx/compiler.h: Assume inline support if
22803 - tools/convert-comments.c: Fix an error in handling of a blank C++
22805 - tools/lowhex.c: Fix an initialization problem that was causing
22807 - tools/nxstyle.c: Fix logic that detects if an operator is
22811 - tools/nxstyle.c: Was confusing hex constants with strings staring
22814 - tools/nxstyle.c: Fix logic error that prevent detecion of '/' and
22820 - NSH Console: Fix copy paste errors. Some Kconfig configuration
22822 - nshlib/nsh_timcmds.c: Uninitialized struct tm caused 'date -s' to
22827 - apps/examples/nxterm: Replace direct calls to nxtk_register()
22831 - apps/examples/nxterm: Most configuration options were not
22833 - apps/examples/nxterm: Replace illegal direct calls to
22836 - apps/examples/nxterm: NxWM passed the size of the NxTK sub-window
22842 - apps/graphics/NxWidgets/nxwm: Correct an error in the type of the
22844 - apps/graphics/NxWidgets/nxwm: Replace direct calls to
22849 - apps/graphics/NxWidgets: Replace illegal direct calls to
22855 - apps/modbus/Kconfig: Fix modbus master Kconfig. Modbus Master
22860 - apps/netutils/dhcpc/dhcpc.c: Fix an error for DHCP REQUEST
22861 receiving a NAK.In DHCP Request operation, no need to update
22866 - apps/system/vi/vi.c: Fix an infinite loop bug that can show up in
22868 - apps/system/vi: Condition KEY_CMDMODE_REPEAT with
22871 - apps/system/nxplayer/nxplayer.c: Fix build error when only enable
22873 - apps/system/system/system.c: Correct a path name. From anchao.
22874 - apps/system/taskset: Fix command arguments are not passed. From
22879 - apps/testing/ostest/timedmutex.c: pthread_mutex_timedlock()
22884 - apps/tools/mksymtab.sh: 'export LC_ALL=C' to get the traditional
22887 NuttX-7.30 Release Notes
22888 ------------------------
22891 and is available for download from the Bitbucket.org website. Note
22892 that release consists of two tarballs: nuttx-7.30.tar.gz and
22893 apps-7.30.tar.gz. These are available from:
22898 Both may be needed (see the top-level nuttx/README.txt file for build
22905 - pthreads: Added non-standard pthread_get_stackaddr_np() and
22907 - boardctl(): Add a command to start the VNC server. From Gregory
22909 - Signals: Remove references to CONFIG_DISABLE_SIGNALS in many
22910 files. Signals can no longer be disabled. From Gregory Nutt.
22914 - NRF24L01: Add support for "multicast" TX mode - no waiting for ACK
22919 - NX Graphics: Add new server->client callback to notify the window
22922 - NX Graphics: Implement new interfaces nx_synch() and nxtk_synch().
22928 - NX Graphics: Add support for modal windows. From Gregory Nutt.
22929 - NX Graphics: Implement a software cursor. The cursor behaves
22934 - NX Graphics: Added support for hiding windows. This features is
22943 - NX Graphics: Windows can now be created in the hidden state.
22948 - NX Graphics: Add new NX interfaces to query if a window is hidden
22950 - NxTerm IOCTLs: Replace specific interfaces between boardctl and
22952 - NxTerm: Add a new IOCTL that can be used to inform NxTerm that
22957 - CAN Upper Half: Support multiple readers of the same port From
22959 - MAX7456: Adds a read-only (for now) /dev/osd0/CM interface for
22963 are returned in binary form. Use hexdump, etc. to format them for
22965 - Serial Upper Half: The upper half serial driver configuration
22970 - FUSB303: Add FUSB303 driver From Juha Niskanen.
22974 - PIC32MZ GPIO: Adds support for edge detect mode. Slew Rate was
22975 also added for completeness. From Abdelatif Guettouche.
22979 - SAME70-xplained: Add a configuration for test Twm4Nx using VNC.
22984 - LPC17xx Ethernet: Added support for KSZ8081RNA PHY to LPC17xx
22986 - LPC17xx Ethernet: Added support for Ethernet PHY ioctl() on
22991 - .i.MXRT1020: Gets imx1020 family support started. It is pretty
22995 Moved each of the imxrt family-specific files into its own
23003 - LPC54xx USB FS Host: Bring in the USB FS OHCI driver from LPC17.
23011 - LPCXpresso-LPC54628: Add a Twm4Nx configuration. From Gregory Nutt.
23015 - CXD56xx: Add initial CXD56xx chip driver sources. From Nobuto
23020 - Spresense: Add Spresense board support. This is not the full
23026 - STM32F7 Clocking: Add support for using the HSE in bypass mode,
23028 - STM32F7 Clocking: Added support for TICKLESS mode. From Valmantas
23030 - STM32H7 Backup Domain: Add backup domain control registers. From
23032 - STM32H7 Clocking: Set the STM32H7 default HSI pre-divider to 4.
23035 - STM32H7 Memorymap.: Add the STM32H7 SYSTEM_UID and DEBUGMCU_BASE
23037 - STM32L071x: Add support for STM32L071x. From Mateusz Szafoni.
23041 - STM32 OTGHS Host: Allow VBUS monitoring for the OTG_HS host
23043 - STM32F0/L0 ADC: Initial ADC support for the STM32 M0 From Mateusz
23045 - STM32F0/LO I2C: Port STM32F7 I2C to STM32F0/L0, From Mateusz Szafoni.
23046 - STM32F1 FLASH: As noted by Matias N, the FLASH base address used
23049 - STM32F3 I2C: Port STM32F7 I2C to STM32F3. From Mateusz Szafoni.
23050 - STM32F7 Ethernet.c: Auto-generate Ethernet MAC address from
23052 - STM32F7 FLASH: Add flash block mapping support for progmem. From
23054 - STM32F7 FMC: Updated stm32_fmc.h with more FMC definitions. From
23056 - STM32F7 GPIO: Adds additional pin alternate function for SPI2.
23058 - STM32F7 PWM: Ported the PWM from F4 to F7. From Eduard Niesner.
23059 - STM32F7 SDMMC: Support bypassing the input clock divider on the
23061 to the SDMMC interface with no dividing. From Anthony Merlino.
23062 - STM32F7 SPI: Add SPI DMA threshold configuration. From Valmantas
23064 - STM32F7 UID: Add UID access. From Valmantas Paliksa.
23065 - STM32F7 USB: USB High speed for STM32F7 series From Ramtin Amin.
23066 - STM32H7 Ethernet: Add stm32h7 Ethernet driver. This is the
23067 initial push for the Ethernet driver. The driver has been tested
23069 for example do MAC filtering on HW level, but just receives all
23071 - STM32H7 GPIO: Add the GPIO_ETH_RMII_RXD1 pinmap definition for
23073 - STM32H7 SDMMC: Add STM32H7 SDMMC driver. It is mostly copied
23077 - STM32H7 Timers: Add timer devices driver for STM32H7. This i
23080 - STM32L0 AES: Add support for AES for L0. From Mateusz Szafoni.
23081 - STM32L0 RND: Add support for RND. From Mateusz Szafoni.
23082 - STM32L0 HSI48: Add support for HS148 for L0. Move HSI48 enable
23084 - STM32L4 USB FS Device: Add USB FS device support. From Juha
23086 - STM32L4 HSI48: Port HSI48 from STM32F0/L0 From Juha Niskanen.
23087 - STM32L4 CRS: Port CRS from STM32F0/L0 From Juha Niskanen.
23091 - B-L072Z-LRWAN1: Add ADC example. From Mateusz Szafoni.
23092 - B-L072Z-LRWAN1: Add nxlines_oled example (ssd1306). Add support
23093 for the I2C tool From Mateusz Szafoni.
23094 - Nucleo-144: Added STM32_RCC_DCKCFGR2_DSISRC definition to board.h.
23096 - Nucleo-144: Mount sysfs for ifconfig for f767-netnsh/defconfig.
23099 - Nucleo-144: Add basic PWM support to nucleo-144 board. More PWMs
23101 Tested on Nucleo-F767ZI. From Phil Coval.
23102 - Nucleo-F303ZE: Add nxlines_oled example (ssd1306) From Mateusz
23104 - Nucleo-H743ZI: Enable the FPU. From Jason Harris.
23105 - Nucleo-H743ZI: Add support for I2C devices: ssd1306, pca9635,
23107 - Nucleo-H743ZI: Add default clock configuration for SDMMC for
23108 Nucleo-H743ZI's board.h. From Jukka Laitinen.
23109 - Nucleo-H743ZI: Add the input clock frequency definitions in
23110 board.h for all the drivers. Assumes internal clock source for
23112 - STM32F4 Discovery: Keep c++ global constructor symbols From
23114 - Nucleo-L073RZ: Add MFRC522 support From Mateusz Szafoni.
23115 - OmnibusF4: Add boardctl() reset logic. From Bill Gatliff.
23116 - OmnibusF4: Add board_ioctl() which is needed only if
23119 - STM32L Discovery: Add support for board_late_initialize(), Move
23122 - STM32F103-Minimum: Add PROCFS automount support From Alan
23127 - include/alloca.h: Add alloca.h. Included limited implementation
23128 of alloc() that is only available for GCC versions 3 and above.
23130 - include/cxx/cstdlib: Add std::random() From Gregory Nutt.
23134 - Many locations: Remove references to CONFIG_DISABLE_SIGNALS.
23135 Signals can no longer be disabled. From Gregory Nutt.
23139 - apps/examples/fb: Add some awareness of overlays to
23141 - apps/examples/lvgldemo. Update to Littlevgl 5.3. From Matthew
23143 - apps/examples/pwfb: Extend example to verify software cursors.
23145 - apps/examples/pwfb: Add options to reduce the number of windows.
23151 - apps/netutils/cjson: Support for the current version of cJSON.
23153 - apps/netutils/libcurl4nx: This is an initial commit libcurl4nx.
23158 - apps/netutils/netinit. This commit removes the private network
23162 - apps/netutils/netlib: Add a more flexible version of
23169 - apps/system/spi: I needed a small test tool for spi in the style of
23175 - apps/graphics/twm4nx. This release introduces Twm4Nx. Twm4Nx is a
23177 1.0.10 to NuttX NX windows server. No, a port is not the right
23178 word. It is are-design of TWM from the inside out to work with the
23184 icon management, user-defined macro functions, click-to-type and
23185 pointer-driven keyboard focus, graphic contexts, and user-specified
23194 with minimal resources. For example, no assumption is made about the
23195 availability of a file system; no .twmrc file is used.
23200 missing critical feature is built-in touchscreen calibration.
23202 - apps/graphics/littlevgl. Update to Littlevgl 5.3. From Matthew
23204 - apps/graphics/nxglyphs: Put all NxWidgets and NxWM glyphs into a
23208 - apps/graphics/nxglyphs: Add some new cursor bitmap images. From
23210 - apps/graphics/nxglyphs: Add mkcursor.c. Will auto-generate
23212 - apps/graphics/nxglyphs: Add 16x16 cursor images. 30x30 are kind
23214 - apps/graphics/nxglyphs: Add a new resize cursor image. From
23216 - apps/graphics/nxwm: Separate NxWidgets and NxWM into separate
23219 - apps/graphics/nxwm: Move the NxWM unit test main() to apps/nxwm.
23220 It is no longer a unit test, but the main startup entry point for
23222 - apps/graphics/nxwidgets: Update NX window clients so that they
23225 - apps/graphics/nxwidgets: Add a synchronize method to every window.
23228 - apps/graphics/nxwidgets: Add support for modal windows. From
23230 - apps/graphics/nxwidgets: Add cursor control methods to the
23232 - apps/graphics/nxwidgets: Add a method to CButtonArray that will
23235 - apps/graphics/nxwidgets: Fix a possible deadlock condition when
23236 waiting for window geometry data that will never come. Fixed by
23237 re-requesting geometry data if we don't already have it. From
23239 - apps/graphics/nxwidgets: Add handshake to
23242 - apps/graphics/nxwidgets: CNxTkWindow, CNxWindow, CNxServer: Add
23244 - apps/graphics/nxwidgets: Add methods to all windows to query if a
23248 ChangeLog for the complete list of bugfixes and for additional, more
23253 - Clock Initialization: A recent change broke Tickless mode for all
23260 - pthread Stack Attribute: Fixed pthread_attr_get/setstacksize
23262 - Signals: The abnormal termination signal handler was just calling
23263 exit() conditionally when, for example, Ctrl-C is sent to a task.
23266 logic must wait for cancellation to be re-enabled; If cancellation
23268 for the victim task to enter or exit a cancellation point. From
23270 - Syscall: Added support for munmap() syscall. From Joao Matos.
23271 - Syscall: Fix a warning due to inconsistencies in return type in
23273 - Syscall: Correct an error syscall.csv. Error occurred when
23279 - fs/littlefs/lfs.c: Fix lfs_format bug. In superblock disk root-
23284 - getsockname(): Fix addrlen check in socket debug features.
23288 with CONFIG_DEBUG_FEATURES and with -Werror flag set. From Jukka
23290 - Network Locking: net_lock() and net_restorelock() now return a
23292 value on failure. This return value is only needed for
23293 -ECANCELED. That cancellation indication needs to ripple all the
23296 checking for the return values of net_lock() and net_restorelock()
23298 - PHY Notification Driver: Change sprintf to strncpy in phy_notify.
23301 - 6LoWPAN HC06: Correct an endian-ness problem in HC06 decompression.
23306 - NRF24L01: Don't block in read if file descriptor is O_NONBLOCK.
23311 - NX Graphics: Fix an error in coordinate system usage. Expected
23313 rectangle in window-relative coordinate frame. From Gregory Nutt.
23314 - NX Graphics: Fix an oversight in the implementation of per-window
23316 for all cases ... EXCEPT ONE: When the window is resized to a
23317 larger size, then the newly exposed territory must be drawn for
23319 - NxTK: Fix an error in handling mouse events for framed windows.
23321 The is only for NX windows, but the outside-the-side positions were
23323 - NxTK: Refuse to open a toolbar of height zero or less. From
23325 - Nxglib: Correct bogus logic in nxgl_interesting(). From Gregory
23327 - VNC Server: Fix an error in color conversion. From Gregory Nutt.
23331 - APDS9960: Initial state of allocated structure was not being set.
23333 - MFRC522: In mfrc522_read uid.sak must be different from 0x04 not
23336 - Power: Fix build for battery gauge From Tom Kopriva.
23337 - Syslog: In syslog buffered mode, avoid IOB alloc lock-up with
23345 - USB CDC/ACM Device: This fixes a problem where the host sent a
23354 - USB HID: The usbhid_descriptor_s struct defined in hid.h included
23355 some optional fields that should not be hard-defined as part of
23358 No code on NuttX currently depends on the structure definition
23360 - USB MSC Device: Correct typo "const const" to "const".
23364 - Zerocross Driver: Fix some errors when debug assertions are
23366 - User Leds: Fix ledset validity check in ULEDIOC_SETALL ioctl.
23371 - All board interfaces (those starting with board_) must be defined
23372 in board-specific logic. Otherwise, they cannot be customized for
23374 interface was defined in architecture-specific logic that only
23376 the board_reset() implementation from the architecture-specific
23377 code and re-implements it in the src/ directory of each board that
23380 - Start-up: Remove dependency on CONFIG_ARCH_FPU for inclusion of
23382 - Architecture initialization: up_initialize() needs to know about
23387 - PIC32MZ GPIO: Corrects the gpioirq when mismatch mode is
23390 * ARMv7-A:
23392 - ARMv7-A Build: Fix 'cc1: warning: switch -mcpu=cortex-a7 conflicts
23393 with -march=armv7-a switch' From Xiang Xiao.
23397 - NRF52: Fix compiler error in nrf52832_errdata.c when following
23402 - STM32 Configuration: It seems one option in the timer configuration
23404 - STM32 start-up: Inclusion of nvic.h should not be conditioned on
23406 - STM32H7 Clocking: Fixes for STM32H7 RCC definitions. From Jukka
23411 - STM32F0/L USART: A few fixes for USART. From Mateusz Szafoni.
23412 - STM32F1/F30 FLASH: RCC register access should not be offset by
23414 - STM32F7 CAN: CAN fixes. From Valmantas Paliksa.
23415 - STM32F7 I2C: I2C Interrupt storm fix. I2C track bad state. Now
23418 - STM32F7 OTG: Fixes some macros related to OTGFS/OTGHS preventing
23420 - STM32F7 OTG Device: Correct hard-coded FIFO size that is wrong
23421 for OTG FS. From Ramtin Amin.
23422 - STM32F7 QSPI: Fix QuadSPI interrupts. This commit essentially
23426 offsets From Pierre-Olivier Vauboin.
23427 - STM32H7 I2C: Fix I2C4 compilation for STM32H7. From Jukka
23429 - STM32H7 UART: Fix compilation for UART7, UART8 and I2C4s. From
23431 - STM32L4 USB Device: Add missing PWR USBV enable, correct two USB
23436 - STM32F103-Minimum: USB reset was not working appropriately since
23439 - Nucleo-l476RG: Fix some errors in GPIO logic when debug assertions
23441 - Nucleo-L476RG: Add missing files of BMP180 example for Nucleo-L476RG.
23443 - STM32F103-Minimum GPIO: Fix some errors when debug assertions are
23445 - STM32L4 PWM: Fix register addr, en_bit and resetbit for pwm timers.
23447 - STM32F746G-DISCO: I2C1 config on stm32f746g-disco. Typo in
23452 - include/limits.h: Remove the duplicate TMP_MAX definitions. The
23455 - include/sys/select.h: Fix compiler error when
23457 - include/signal.h: Add commented out definition of the si_addr
23459 - include/unistd.h: Fixed R_OK/X_OK definitions to match POSIX.
23462 - libs/libc/locale: Improved error handling in setlocale(). From Joao
23464 - libs/libc: Fixed return code in uname(). From Joao Matos.
23465 - libs/libc/stdio: Restore support for printing NULL string as
23466 "(null)". Legacy printf supported printing "(null)" in place for
23468 commit restores this functionality for new printf library. From
23473 - apps/examples/pca9635/pca9635_main.c: fix compilation error. From
23478 - Various graphics apps (and apps/examples): If CONFIG_VNCSERVER=y,
23482 - apps/graphics/nxwidgets: CWidgetControl::handleLeftClick now
23486 - apps/graphics/nxwidgets/: NXWidgets::CNxWidgets: Fix some issues
23488 returning false if there was no change in size or position. Many
23494 - apps/system/nxplayer: Fix some logical errors from recent commits.
23497 NuttX-7.31 Release Notes
23498 ------------------------
23501 and is available for download from the Bitbucket.org website. Note
23502 that release consists of two tarballs: nuttx-7.31.tar.gz and
23503 apps-7.31.tar.gz. These are available from:
23508 Both may be needed (see the top-level nuttx/README.txt file for build
23515 - poll(): Removed all references to CONFIG_DISABLE_POLL. The
23516 standard POSIX poll() can no longer be disabled. From Gregory Nutt.
23517 - LWL console: Add support for OpenOCD 'Lightweight Link' protocol
23518 between a target and debugger for use when you need a console but
23524 - Socket Options: Previous change removed some incorrect SO_LINGER
23531 - Telnet Driver: Handle ctrl events (SIGINT, SIGSTP). From
23533 - Telnet Driver: I/O thread now offloads reading from socket
23538 - GS2200M: Add support for Telit GS2200M Wi-Fi module From Masayuki
23540 - GS2200M: Introduce CONFIG_WL_GS2200M_SPI_FREQUENCY. Also, changed
23543 - GS2200M: Add channel parameter for AP mode in gs2200m.c From
23548 - Video Streaming: Add basic Video Stream and Capture implementation
23550 - video/: Create video/ directory to hold non-driver video-related
23552 - EDID: Add some initial EDID logic ported from FreeBSD. From
23554 - EDID: Add logic to sort video modes by how close they are to the
23557 - EDID/Video Modes: Separate EDID and from videomode management.
23559 - EDID/Video Modes: Add debug functions to dump the EDID and
23561 - VESA GTF: Bring VESA Generalized Timing Formula (GTF) from FreeBSD.
23563 - Video Modes: At some additional lookups from FreeBSD. Not
23564 currently used in NuttX so ifdef'ed out for now. From Gregory Nutt.
23565 - tda19988: Now uses the new common videomode structure of
23568 - ILI9340: Add ILI9340 LCD Single Chip Driver. Required LCD driver
23572 - LPM013M091A: Add JDI LPM013M091A LCD Driver. From Alin Jerpelea.
23573 - ISX012: Add support for ISX012 Image sensor. From Alin Jerpelea.
23577 - SPI Interface: Added standard definitions for ADC SPI device ID.
23579 - AK09911/AK09912: Add Asahi AK09911/AK09912 compass sensor over I2C
23581 - AS726X: Add support for AS726X spectral sensor From Fabian Justi.
23582 - BMI160: Add driver support for the Bosch BMI160 Inertial Measurement
23585 - BMP280: Add Bosch BMP280 Barometic pressure sensor connected over
23587 - INA3221: Adds INA3221_I2C_ADDRx macro helpers. From Anthony
23589 - VL53L1x: Added support for VL53L1x TOF sensor. From Juan Flores.
23593 - PIC32MZ DMA: Add DMA support. From Abdelatif Guettouche.
23597 - i.MXRT EHCI: Add i.MXRT EHCI driver. From Dave Marples.
23598 - i.MXRT USDHC: Implements SDIO and Multi-card support for i.MXRT.
23600 - i.MXRT USDHC: Implements USDHC1 & 2 selection on the imxrt. If
23604 - i.MXRT Serial: Add TIOCSINVERT ioctls. From Beat Küng.
23605 - i.MXRT Serial: Implemented RS485 RX/TX switching and RTS/CTS flow
23606 control for the IMXRT family. It has been tested on 1020 but I
23607 don't see any reason for issues on any other family member. From
23612 - Kinetis Serial: Add UART signal inversion support From Beat Küng.
23616 - LPC11xx: Support for the LPCXpresso-LPC1115 and for the LPC1115
23617 architecture in general was removed after NuttX-7.30. The LPC11
23618 port was never really used (to my knowledge) and was no longer
23622 for the architecture. From Gregory Nutt.
23626 - PNEV5180B: Add support for NXP Semiconductors' PN5180 NFC Frontend
23628 the moment there is just support for a minimal nsh configuration via
23630 - PNEV5180B: Add usbnsh configuration. This is basically the same as
23633 - PNEV5180B: Adds NSH configuration with UART0 and eth0 via CDC/ECM
23635 - PNEV5180B: Add new configuration includes a USB Composite Device
23639 - PNEV5180B ROMFS: Auto-mount baked-in ROMFS image. Includes support
23640 for linking a binary ROMFS image into the nuttx executable and for
23641 mounting it during board bring-up. From Michael Jung.
23642 - PNEV5180B PROTECTED: Add PROTECTED mode configuration with
23647 - LPC40xx: Add support for LPC40xx family chips. Renamed LPC17XX to
23650 functions for the LPC17xx family. Added configuration options, chip
23651 definitions, and additional pin functions for the LPC40xx family.
23656 - LPC4088-Devkit: Added board configuration for Embedded Artists
23658 - LPC4088-Quickstart: Added board configurations for Embedded Artists
23663 - LPCXpresso-LPC54628: Enable DATE command in twm4nx1 and twm4nx2
23668 - CXD56xx: Adds (1) the HW pin configuration, (2) GPIO support for
23673 - CXD56xx: Add Package Configuration. The CXD56xx can come in FCBGA
23674 185 pin or WLCSP 100 pin package. For each package we have to pick
23677 - CXD56xx: Add Power Management support From Alin Jerpelea.
23678 - CXD56xx: (1) Add syscontrol, (2) Add the function to change the
23684 - CXD56xx USB: Add basic support for USB connectivity. From Alin
23686 - CXD56xx SDHC: Add SDHCI driver for the CXD56xx. From Alin
23688 - CXD56xx SPI: Add SPI support. From Alin Jerpelea.
23689 - CXD56xx DMA: Add DMA support. From Alin Jerpelea.
23690 - CXD56xx RTC: Add RTC support. From Alin Jerpelea.
23691 - CXD56xx PWM: Add support for PWM. From Alin Jerpelea.
23692 - CXD56xx Power Management: Add Power Management PROCFS support. From
23694 - CXD56xx Timer: Add Timer driver. From Alin Jerpelea.
23695 - CXD56xx Watchdog Timer: Add watchdog timer support. From Alin
23697 - CXD56xx UID: Add support to be able to read the HW UID. From Alin
23699 - CXD56xx I2C: Add I2C support. From Alin Jerpelea.
23700 - CXD56xx I2C: Add I2C character driver support. For testing
23703 Add SPI-based SP card support. From Alin Jerpelea.
23704 - CXD56xx SCU: Add Sensor Control Unit (SCU); Use DMAC for reading
23706 - CXD56xx ADC: Add ADC interface support. From Alin Jerpelea.
23707 - CXD56xx eMMC: Add eMMC support for CXD56xx chip From Alin Jerpelea.
23708 - CXD56xx Camera: Add driver for hardware image processor device to
23711 - CXD56xx CISIF: Add CISIF support to be able to use cameras. From
23713 - CXD56xx GNSS: Add GNSS device, add Geofence Support, add UART0
23719 - Default Configurations: (1) We are using the framework to
23726 - Default Configurations: Add support for RNDIS configuration. From
23728 - RTC: Enable RTC functionality on SPresence board From Alin
23730 - SPI FLASH: Enable SPI Flash arch/arm/src/cdx56xx: (1) Group all
23734 - Add SPI configuration for SPresence board. Enable PWM support on
23739 - Add USERLED for SPresence board. From Alin Jerpelea.
23740 - Enable I2CDEV for SPresence board. Add useful diagnostic LEDs on
23742 - Add support for Tilt GS2200M Wi-Fi module. From Masayuki Ishikawa.
23743 - Remove SPI MMC/SD support and enable ADC support for SPresence
23745 - Enable BMI160_I2C sensor over I2C on SPresence board. From Alin
23747 - Add I2CTOOL support and extend GPIO for future use. Add delay
23748 support for CXD56xx chip. For development is useful to register
23751 - Add use o the CXD56_I2C_DRIVER to register the /dev/i2c character
23754 - Enable UID functionality. To enable the UID functionality for
23757 - Add USBDEV_SETNOTIFYSIG signal ID. Set signal ID for notify USB
23760 - Register the procfs in the NSH configuration. This is a
23764 - Add support for MSC and USB Composite device. Adds usbmsc
23766 template for gpio buttons that can be connected on the external
23768 - LCD: Add support for LPM013M091A LCD, add support for ILI9340
23771 - WiFi: Improve performance for webserver: (1) Enable SPI DMA for
23773 (3) Increase buffer size for sendfile() from 512B to 1KBm abd (4)
23774 Enable sendfile() for webserver. From Masayuki Ishikawa.
23775 - MPY: Add MPY defconfig. From Alin Jerpelea.
23776 - Update defconfigs rndis and wifi: Enable RTC and webserver with
23777 directory listing support. Also, changed start year/month/day for
23779 - Build nuttx.spk images. Enable nuttx.spk binary image that can be
23781 - configs/SPresence: Add entry point for MPY. The entry point is
23782 needed for the downstream projects based on SPresence. From Alin
23784 - Enable internal flash storage for SPresence boards. The SmartFS
23786 - For compatibility with SDK we need to change the USER_ENTRYPOINT
23791 - STM32 Kconfig: Add MEDIUM_DENSITY selection. From Dave Marples.
23792 - STM32 Kconfig: Add the missing STM32 LCD Clock Source Selections.
23794 - STM32G0: Initial support for STM32G0 family. From Mateusz Szafoni.
23795 - STM32F0L0G0: Renamed directories STM32F0L0 to STM32F0L0G0 since
23798 - STM32H7x3: Added ADC pins to pin map. From David Sidrane.
23802 - STM32 PWM: Add support for all PWM modes. Add an interface to
23808 - STM32 FSM/FSCM: Split the STM32 FMC/FSMC functionality. Makes FMC
23813 - STM32F7 DTCM: Add procfs register From Daniel Agar.
23814 - STM32F7 GPIO: Add GPIO driver. Code is inspired from STM32F3-
23815 Discovery and Nucleo-L476RG platforms. Tested on Nucleo-F767ZI.
23817 - STM32F7 Serial: This adds the ability to invert and swap RX/TX on
23819 number, but did not implement it. This is the same as for
23821 - STM32L4 CRS: Make STM32L4 CRS synchronization source board
23823 - STM32L4 HSI48: Enable CRS_CR_CEN with CRS_CR_AUTOTRIMEN. From
23825 - STM32L4 I2C: Add support for 16 and 120 MHz timings. Board can use
23826 HSI16 clock for I2C From Juha Niskanen.
23827 - STM32L4 PWR: Enable PWR peripheral for setting USV. From Jussi
23829 - STM32L4 RCC: Use Range 1 Boost mode if SYSCLK is higher than 80
23831 - STM32L4 Serial: Add TIOCSINVERT and TIOCSSWAP ioctls. From Beat
23833 - STM32H7 ADC: Added ADC Driver, ADC clocking. From David Sidrane.
23834 - STM32H7 Ethernet: Fix typo in define. From Pierre-Olivier Vauboin.
23835 - STM32H7 PWM: Port PWM from STM32 From Mateusz Szafoni.
23836 - STM32H7 QEncoder: Ported the QEncoder from F7 to H7. From Eduard
23838 - STM32H7 Serial: Add TIOCSINVERT and TIOCSSWAP ioctls. Ensure
23843 - Olimex-STM32-E407: Added BMP180 initialization and a configuration
23845 - Olimex-STM32-E407: Add DAC support, add IN219 support, add timer
23847 - Olimex-STM32-E407: Add support for MRF24J40 radio. From Gregory
23849 - Axoloti: Adds initial support for the Axoloti sound/music
23852 - Nucleo-G071RB: Initial support for nucleo-g071rb. From Mateusz
23854 - Nucleo-L432KC: Add new configuration settings for CRS
23856 - Nucleo-L432KC: Add support for testing the ina219 current sensor.
23858 - Nucleo-L452RE: Add new configuration settings for CRS
23860 - Nucleo-144: Add ROMFS support. Image was generated using genromfs
23861 tool. Tested on Nucleo-F767ZI. From Phil Coval.
23862 - Nucleo-144: Add reset feature. Code is derives from STM32F4-
23865 - Nucleo-L476RG: (1) Add I2C tool to board init, (2) Add support for
23867 - Nucleo-L496ZG: Add new configuration settings for CRS
23869 - STM32L476VG-Disco: Add new configuration settings for CRS
23871 - STM32L4R9AI-Disco: Add ksh config, some updates for I2C, SPI and
23873 - Nucleo-H743ZI: Add ADC support. From David Sidrane.
23874 - STM32F769I-Disco PWM: Enable PWM support for stm32f769i-disco
23876 - STM32L-Discovery: Add button support for stm32Ldiscovery. Add
23877 chronometer board config. From Alan Carvalho de Assis.
23881 - AM335x Clock Module: Add clock module registers definition. Switch
23882 to DMTIMER1 for systick. From Petro Karashchenko.
23886 - AM335x CAN, LCD: Add register description files for DCAN and LCD.
23888 - AM355x I2C: Add register description files for I2C (plus various
23890 - AM355x MCSPI: Add register description files for MCSPI. From Petro
23892 - AM355x LCDC: This change brings in an initial LCD driver into the
23894 - AM335x Framebuffers: Add logic to map the framebuffer to a non-cached,
23895 non-buffered memory region. From Gregory Nutt.
23896 - AM335x LCDC: Add logic to get/set the module reference clock. From
23901 - Beaglebone-Black LCD: Add a configuration for bringing up the LCDC
23903 - Beaglebone-Black LCD: Framework (only) for TDA19988 and LCD support
23904 for Beaglebone Black. Can't use TDA19988 yet because there is no I2C
23910 - z16f ZNeo: Add support for the latest 5.2.1 version of the ZDS-II
23915 - Integrate support for the newest eZ80 ZDSII 5.3.0 toolchain. From
23920 - eZ80 RTC: Integrate and verify the RTC driver From Gregory Nutt.
23921 - eZ80 RTC: Add an RTC lower half driver. From Gregory Nutt.
23925 - MakerLisp: Add initial support for the MakerLisp eZ80 board. Ref:
23927 - MakerLisp: Add hooks needed by SPI driver. Move SPI MMC/SD chip
23929 other NuttX architectures. This enables support for multiple
23931 - MakerLisp: Add Smart Flash Programmer project. From Gregory Nutt.
23932 - MakerLisp: Enable Procfs, RTC, SPI-based SD support, task name, NSH
23934 - MakerLisp: Use .ztgt files from MakerLisp SDK. From Gregory Nutt.
23935 - MakerLisp: Add a tiny FLASH-resident loader that will load and
23938 - MakerLisp: Bring in a new configuration to support execution
23940 - MakerLisp: Add an sdboot configuration that will load .hex files
23942 - MakerLisp: Add a linker script to support copying the NuttX image
23944 - MakerLisp: The VGA display controller and keyboard controller come
23946 newlines expance to carriage-return, newline. This change turns that
23951 - include/cxx/cstddef: Add C11++ std::nullptr_t From junmin-kim.
23952 - libc netdb: Implemented the netdb functions getnameinfo(),
23957 - Applied a style sheet to static HTML files. Put the TOC of each
23961 so I had to accommodate for this. I also didn't go into collapsing,
23962 although this could really help for some long TOCs. From Matias N.
23963 - Coding Standard: Add a brief section summarizing the major
23965 stop-gap measure in lieu of having a real C++ coding standard. From
23967 - Coding Standard: Update requirements for indenting C pre-processor
23969 - Coding Standard: Small change discouraging the practice of
23972 - COPYING. Tools in the tools/ directory are not intended for binary
23978 - tools/ocdconsole.py: OCD TCL interface changed after version 0.10
23981 - tools/nxstyle.c: Tool depends on the file under test containing
23984 - tools/nxstyle.c: Bandaid-up logic that detects left brackets on the
23987 - tools/nxstyle.c: No warning for declarations that begin in column 1
23991 - tools/: Add spk binary format. The .spk binary format is used on
23993 binary format set in your config CONFIG_CXD56_BINARY=y. From Alin
23995 - tools/: Add flash_writer for CXD56 boards. This flash writter is
23996 using the xmodem for firmware transfer for flashing please use:
23997 'tools/flash_writer.py -s -c /dev/ttyUSB0 -d -b 115200 -n nuttx.spk'.
24002 - Removed all references to CONFIG_DISABLE_POLL. The standard POSIX
24003 poll() can no longer be disabled. From Gregory Nutt.
24007 - apps/examples/abntcodi: Adds test/demo program for ABNT CODI
24009 - apps/examples/webserver: Update to compile with
24013 - apps/examples/chrono: Add chronometer apps example. From Alan
24018 - apps/netutils/webserver: Add mp3 mime type to httpd.c. From
24020 - apps/netutils/webserver: Add directory listing to httpd. From
24022 - apps/netutils/webserver: Add web server info based on uname().
24027 - apps/wireless/gs2200m: Add usrsock daemon for Tilt GS2200M Wi-Fi
24029 - apps/wireless/gs2200m: Add channel parameter for AP mode. From
24034 - apps/graphics/nxglyphs: Add more modern looking button images for
24036 - apps/graphics/slcd: Adds a CSLcd class that will generate graphic
24038 - apps/graphics/twm4nx: This change adds a calibration screen to
24043 - apps/graphics/twm4nx: Move application-related files into different
24046 - apps/graphics/twm4ndx: Compile out cursor support if we are using a
24048 - apps/graphics/twm4nx: Add an alternative COMPONTEMPORARY theme.
24050 - apps/graphics/twm4nx: Use custom CWidgetStyle to force Icon
24052 - apps/graphics/twm4nx: Add some definitions to support Themes.
24054 - apps/graphics/twm4nx: Add a configuration option to control the
24056 anager no longer relies the default window width; now it
24059 - apps/graphics/tmw4nx: Add a CClock class that implements the
24062 - apps/graphics/twm4nx/README.txt: Add an overview of how to create
24067 - apps/industry/abnt_codi: Adds support for ABNT CODI library. This
24072 ChangeLog for the complete list of bugfixes and for additional, more
24077 - Semaphores: Fix a bad assertion in priority inheritance logic.
24082 - Memory Manager: Fix error that occurs when CONFIG_CPP_HAVE_VARARGS
24086 - System Calls: Adapt the conditional compile logic on when to
24087 include the vfork() syscall proxy and stub to the logic used for
24089 - System Calls: Fixed SYS_mount syscall define when CONFIG_FS_READABLE
24091 - waitpid(): In waitpid, remember to grab the exited child ptr. After
24098 - MMC/SD: Fixes bug where thread gets deadlocked due to recursive call
24101 initialize it, we should not re-register for an insertion event as
24103 register for a removal event and wait for the card to be removed and
24104 re-inserted. From Anthony Merlino.
24108 - UsrSock: Fix debug logs and remove DEBUGASSERT from
24110 first request for usrsockdev_do_request(). However, in a server
24114 - ICMPV6 Autoconfig: Use ntohs() to convert IPv6 address from
24116 - TCP Buffering: Fix TCP buffer send deadlock in iob_copyin() when
24119 - TCP Close: Fix TCP active close in inet_close.c. In previous
24122 happens because the socket closing sequence waits for the
24124 server use-cases, SO_LINGER is not usually set and even in these
24126 in inet_close.c so that it can wait for status.cl_sem regardless
24127 of SO_LINGER. Instead, if SO_LINGERis set, it waits for the
24129 - UDP: Fix C89 compatibility problem. Empty initializers are not
24131 - Telnet: Fix a C89 non-compliance that was breaking the eZ80 build.
24136 - NRF24L01: Fix NRF24L01_NCMDS in ioctl.h. The last one in
24138 - NRF24L01: Fix PIPENO/PKTLEN bitmask in RX FIFO header. In RX FIFO
24147 - Raising Windows: Fix a critical list handling bug in the graphics
24148 system. When a lower-level window was raised while a model window
24153 - Serial: Limit the number of times that the poll semaphore is
24155 - USB Host: Remove duplicate const in USB Host files. From Adam
24157 - USB Host Composite: Class-specific descriptors were not available
24160 This change will copy any class-specific interface descriptors for
24162 finding two interface descriptors back-to-back. From Adam Porter.
24163 - USB Host Composite: The cfgdesc pointer was initialized after the
24168 - USB MSC: Fix usbmsc_exportluns declaration. Fixes the following
24174 - Rename all arch/<family>/src/<chip>/chip directories to
24185 - Default Configurations: Update configurations for changes to
24187 was represented by type long long. That is a problem for
24191 - Default Configurations: Change CONFIG_NSH_MACADDR to
24193 - Default Configurations: Fix mac address settings for RNDIS.
24197 - Default Configurations: Kconfig files should not select
24199 SCHED_LPWORK and SCHED_HPWORK. Selecting it has no effect other
24201 - Linker Scripts: Make sure sections are aligned to 32-bits in all LD
24202 linker scripts. This fixes and issues noted specifically for the
24205 - Linker Scripts: Add . = ALIGN(4); before every .data section,
24211 - configs/Board.mk: Cannot call $(AR) directly. That works only with
24212 GCC. It must, instead use the ARCHIVE command from Config.mk as do
24217 - Fix a copy-paste error. On vfork, the GP register was being set to
24220 - An older commit used CP0 register definitions that were not defined
24228 - PIC32MZ GPIO: Use LAT instead of PORT when writing. From Ouss4.
24232 - SAMD2/L2: Correct TC register bit field definitions used with
24237 - LPC17xx PROTECTED: On the LPC1769 there are two 16 KiB AHB SRAM
24249 view), which is probably why no problems emerged here. Both still
24252 have no hardware to confirm. From Michael Jung.
24256 - LPCXpresso-LPC54628: Modify the TWM configurations to properly
24265 - i.MXRT Serial: Fix serial TIOCSINVERT From David Sidrane.
24266 - i.MXRT USDHC: USDHC Stopgap Fix for build breakage From David
24268 - i.MXRT USDHC: Fix compiler error for CONFIG_IMXRT_USDHC1 &&
24273 - LC823450-XGEVK: Remove CPU assignment for LPWORK. This change will
24274 reduce audio under-run when running dvfs auto mode. From Masayuki
24279 - EFM32 USB Host: Apply Adam Porter's STM32 fix to EFM32 which has
24284 - STM32F1 Pinmap: Fix names for complementary PWM outputs From
24286 - STM32L4: If SRAM3 is used as heap, do not power it off in stop 2
24291 - STM32 ADC: Fix a compilation error when verbose analog debugging is
24292 enabled for the STM32 ADC. not all STM32s have an SQR4 register.
24294 - STM32 PWM: Fix pulse count for the number of counts greater than 128.
24296 - STM32 USB OTG FS/HS Host: In stm32_ctrlout() in the HS and FS host
24301 - STM32L4 USB: Fix USB device PMA accesses. USB PMA accesses are
24302 done as 16-bit words on STM32L4 instead of 32-bit words on STM32L1.
24304 - STM32L4 OTG FS/HS: Fix constant using in comparison to determine
24306 - STM32F7 OTG FS/HS: Fix constant using in comparison to determine
24308 - STM32H7 PWM: Fix pulse count for the number of counts greater than 128.
24310 - STM32H7 Serial: Fix error when SINGLEWIRE or
24312 - STM32H7 SPI: Correct a typo in condition compilation. From
24314 - STM32H7 Timer: Fixed compile errors with TIM13, TIM14, TIM7. From
24316 - STM32H7 USB OTG FS/HS: Fix constant using in comparison to determine
24318 - STM32G0 Serial: Fix STM32G0 error when SINGLEWIRE or SERIALBRK_BSDCOMPAT
24323 - Nucleo-L432KC: Shorten some long lines, fix i2c pinout. From
24325 - STM32L476VG-Disco: Fix an error in defconfig files because a line
24328 - STM32L4R9AI-Disco: Fix an error in defconfig files because a line
24331 - OmnibusF4: Correct naming of a configuration variable for ROMFS.
24333 - Olimex-STM32-E407: Change initialization to match the way it is
24335 - Olimex-STM32-E407 SPI: Add SPI initialization logic. From Juan
24337 - STM32F4-Discovery ROMFS: Missing colon in declaration of local
24339 - STM32F4-Discovery ROMFS: Correct naming of a configuration variable
24340 for ROMFS. From Phil Coval.
24341 - STM32F4-Discovery Build: Fix .ARM.exidx section overlap Source:
24342 …https://stackoverflow.com/questions/30778614/arm-none-eabi-ld-section-arm-exidx-overlaps-section-d…
24344 - STM32F4-Discovery PROTECTED: Fix a problem with undefined symbol
24346 into recursive archive group between --start-group and --end-group.
24349 - Nucleo-H743ZI SPI: Correct typos in function naming. From Jonathan
24354 - AM335x SYSCLK: Add a function to return a frequency of the system
24356 - AM355x CM: Fix a typo in a macro name. From Gregory Nutt.
24357 - AM355x LCD: Fix a few typos. Add things needed by the LCDC driver.
24362 - Tiva Ethernet: Add a workaround for tiva with qemu. With qemu,
24369 - TM4C1294-Launchpad: Fix syntax error in oocd.sh script. From
24374 - z80: up_addregion() must be prototyped in nuttx/mm/mm.h, not
24381 - z80sim: Remove unused function up_earlyserialinit() from serial
24386 - z16f ZNeo: Replicate build changes make for eZ80 and z8 for ZNeo.
24388 - ZNeo compile fixes: Fix misuse of FAR which makes a difference on
24389 this platform. Be consistent in use of WDOG_ID type. ZDS-II doesn't
24390 like auto-conversions of struct wdog_s * to WDOG_ID (which is type
24395 - eZ80: Fix eZ80 compile problems due to New ZDS-II toolchain and
24396 ongoing bit rot due to non-C89 code creeping into the core OS. From
24398 - eZ80: Fix some backward conditional logic in Make.defs. From
24400 - eZ80: Fix a logic error in vector initialization. From Gregory Nutt.
24404 - signal.h: Fix a C89 compliance problem that cause the eZ80 build to
24407 - wqueue.h: Allow definitions even if work queues are not enabled.
24410 - fixedmath.h: Regarding the single precision float to/from fixed
24417 - stdio: Fix long long usage in all of the newer printf-related
24420 - gm_time_r(): Spurious reorganization of a loop in gm_time_r() to
24421 work around and ZDD-II internal compiler error. Might be a little
24424 - Debug: For platforms whose CPP tool does not support a variable
24425 number arguments to pre-processor macros, we may still need to build
24427 For example, __alert() may be needed if CONFIG_ARCH_STACKDUMP is
24432 - tools/nxstyle.c: Fix error in conditional logic that was preventing
24436 - tools/mkexport.sh: The mcu sub-directory chip/ was renamed to
24443 - apps/nshlib: Fix all places where cle() and readline() are used.
24445 value. Checking only for EOF causes failures to be missed (and
24447 - nshlib/nsh_parse.c: Fix a warning about an uninitialized variable
24448 from the ZDS-II compiler. From Gregory Nutt.
24449 - apps/nshlib/nsh_ddcmd.c: Seemingly nonsense change but somehow
24450 works around a compilation error using the ZDS-II toolchain. It
24456 - apps/netutils/netinit: MAC address configuration was represented
24457 by type long long. That is a problem for architectures that do not
24460 - apps/netutils/telnetd/telnetd_daemon.c: Fix a C89 violation that
24462 - apps/netutils/json: Removed. Replaced with apps/netutils/cjson.
24467 - apps/graphics/twm4nx: Fix an uninitialized variable that was
24470 - apps/graphics/twm4nx: Fix a calibration screen startup issue.
24472 - apps/graphics/twm4nx: Revise logic to detect clicks on the
24475 - apps/graphics/twm4nx: Remove some remaining stuff from TWM that
24479 - apps/graphics/twm4ndx: Add a 'critical' bit to the eventID. While
24482 - apps/graphics/twm4nx: CBackground now brings up the main menu if
24486 - apps/graphics/twm4nx: Fix a bug in placement of icons on the
24489 - apps/graphics/twm4nx: Fix some errors found when enabling NX
24491 keyboard drivers need to be opened non-blocking. From Gregory Nutt.
24493 NuttX-8.1 Release Notes
24494 ------------------------
24497 and is available for download from the Bitbucket.org website. Note
24498 that release consists of two tarballs: nuttx-8.1.tar.gz and
24499 apps-8.1.tar.gz. These are available from:
24504 Both may be needed (see the top-level nuttx/README.txt file for build
24508 change to the OS that makes it more-or-less incompatible with preceding
24511 in nuttx-7.31. That directory has been renamed boards/ and now has a
24513 for the most part:
24515 board/ - Holds all board-related information
24516 board/<arch> - Holds board-related information for all boards that use
24517 the same CPU architecture. For example, all ARM-based boards will be
24519 board/<arch>/<chip> - Holds board-related information for all boards
24520 that use the same MCU chip family. For example, all STM32-based
24522 board/<arch>/<chip>/<board> - Holds board-related information for a
24524 nuttx-7.31. So, for example, the STM32F4-Discovery board support that
24527 boards/<arch>/<chip>/<board>/<configs> - All configurations for a
24529 subdirectory. So, continuing the example, the STM32F4-Discovery NSH
24538 This re-organization is the work of Alin Jerpelea. Not only did Alin do
24539 this major directory re-organization, but he ran the code standard
24544 You have to give Alin credit for his effort to take on really big jobs and
24547 A more constrained re-organization of the drivers/ directory was also
24550 for a new set of RF-related drivers.
24553 ---------------------------------------------------
24557 - POSIX Message Queues: Add a test to verify that message queue is
24564 - Signal Notifications: Add configuration option to select either the
24565 high-priority or low-priority work queue for SIG_EVTHREA
24567 - System Calls: In order to support built-in in function in protected
24580 - /etc/passwd and /etc/group: Improve the format of the /etc/passwd
24585 - User/Group IDs: Implement 'real' setuid, getuid, setgid, and getgid
24589 - Debug Output: Add debug macros for contactless. The various
24592 ctls[info|warn|err] macros for the overall contactless subsystem to
24596 - IOB instrumentation. Introduces producer/consumer id to every IOB
24600 - IOB ProcFS: Adding ProcFS support at /proc/iobinfo to show the data
24602 - Versioning: Report GIT information via ProcFS. GIT info reported:
24608 - BinFS: The BinFS file system uses the same built-in library and
24609 built-in arrays as does NSH. The built-in arrays are simple name-
24610 value pairs that map built-in function names with the user-space
24611 entry point. In the FLAT build, the built-in arrays are available
24614 reference to the user-space built-in array. This commit adds those
24616 used by applications to the provide the built-in list reference to
24618 - MMC/SD: Added support for MMC (eMMC) bigger than 2 GB (Tested with
24620 - AT24CSxx: Register a character driver for UUID of AT24CSxx chips.
24623 - Macronix FLASH: Add support for 4-byte addressing on >128Mb
24625 - MX25Rxx: Add support for 512B sectors. From Simon Piriou.
24626 - SST26: Accept the 16MBit Flash when reading the JEDEC-ID at
24631 - IPv4 Options: Now handles reception of IPv4 packets with larger
24632 IPv4 headers containing options. From Gregory Nutt.
24633 - Sockets: Re-order the content of all address-family socket
24635 This permits better use of logic for different address family
24637 - TCP: Make RTO and WAIT_TIME configurable. This fix is not really
24638 correct: TCP RTO really should be calculated dynamically for each
24639 TCP connection: http://sgros.blogspot.com/2012/02/calculating-tcp-rto.html.
24641 - IP Forwarding: Check if interface is up early on when forwarding to
24644 to be sent on each other netdev without regard for whether it is in
24649 - RNDIS: Expose option to change the number of write requests that
24651 - GS2200M: Add UDP support. From Masayuki Ishakawa
24652 - GS2200M: Implement GS2200M_IOC_IFREQ IOCTL command. From Masayuki
24654 - GS2200M: Enable NuttX's DHCP client instead of GS2200M's DHCP
24656 - GS2200M: GS2200M now supports SIOCGIFHWADDR From Masayuki
24661 - IEEE802.15.4 Network Driver: Allow 64-bit prefix to be configurable
24662 when auto-configuring the IPv6 address during bring-up. Previously,
24663 only the link-local prefix fe80::/64 was used. Also, put the
24666 - IEEE 802.15.4 MAC: Adds support for energy detect. Adds support
24667 for energy detect by introducing a new radio call/callback, as the
24670 - IEEE 802.15.4 MAC: Adds support for getting/setting
24671 macMaxFrameRetries via IOCTL. Add get support for rxonidle
24673 - IEEE 802.15.4 MAC: Move the global iobuffer into the macnet struct
24676 - IEEE 802.15.4 MAC: Defer handling of extracting association
24678 - IEEE 802.15.4 Radios: Support dynamic FCS length. Adds
24683 received frame by increasing the iob->io_len by the FCS length.
24685 - Xbee: Support "WR" AT command for writing parameters to non-
24687 - Xbee: Add configuration option for setting the default prefix
24693 - RTC: If the RTC time is successfully set, then update the current
24695 - ADT7320: Add support for the ADT7320 temperature sensor. From
24697 - DAC7554: Add support to the DAC7554 digital-to-analog converter.
24699 - DAT-31R5-SP+: Add support to the DAT-31R5-SP+ digital attenuator.
24701 drivers related to RF peripherals. It also adds support for the
24702 DAT-31R5-SP+ digital attenuator. From Augusto Fraga Giachero.
24703 - ISL29023: Add basic driver of ISL29023 ambient light sensor. The
24707 - SHT3x: Add Sensirion SHT3x driver. From Markus Bernet.
24711 - Simulator Build: Even though the simulation has no "chips", it
24712 needs to have CONFIG_ARCH_CHIP and chip sub-directories. Otherwise,
24718 - PIC32MZ. Make the PLL input clock configurable. From Ouss4.
24720 * ARMv7-M
24722 - Add ARMv7-M setjmp/longjump functions. From David S. Alessio.
24726 - i.MXRT Clocking: Enable TRACE clocks if the divider has been
24731 - i.MXRT QEncoder: Adds quadrature encoder driver for IMXRT. From
24733 - i.MXRT uSDHC: This change completes SDIO support for IMXRT, and
24734 also adds support for WiFi using the AP6212A module based on Simon
24736 DavidS's concern about width setting for USDHC1 and 2. Testing of
24741 interfaces fleshed out and the hardware proven so it can go for pre-
24742 production build. I _think_ there's only Bluetooth and USB-device
24744 - i.MXRT uSDHC: IMXRT uSDHC driver cmd line reset logic modified.
24749 - Kinetis Serial: Add possibility to specify pull-up instead of
24750 open drain for serial single-wire mode. From Beat Küng.
24754 - LPC17xx/40xx Build: Cortex-M system reset is applicable to
24759 - LPC17xx/40xx Ethernet: Follow the procedure listed in the
24767 - Added architecture support for the NXP S32K1xx family. Basic
24773 - S32K1xx eDMA Leverage eDMA logic from i.MXRT to S32K1XX. Appears
24776 - S32K1xx LPUART: Bring in the LPUART from i.MXRT. It is the same
24778 - S32K1xx SysTick: Bring in Cortex-M0+ SysTick and interrupt handling
24779 from samd2l2; bring in Cortex-M4F Systick and interrupt handling
24781 - S32K1xx GPIO: Bring in GPIO logic from Kinetis. Looks like similar
24783 - S32K1xx Ethernet: Unverified port of the i.MXRT Ethernet driver to
24785 - S32K1xx LPSPI and LPI2C: Brings in the LPSPI and LPI2C peripheral
24791 - S32K118EVB. This commit adds initial board support for the NXP
24794 - S32K118EVB: Implement board support for on-board LEDs and buttons.
24795 This is taken from the Freedom-K66f with has the same LED and
24798 - S32K146EVB: Adds initial board support for the S32K146EVB
24802 - S32K146EVB: Add support for execution out of SRAM. This is helpful
24803 for bring-up when you want to avoid putting a lethal image in FLASH.
24805 - S32K148EVB: Add support for the NXP S32K148EVB development board.
24806 Very similar to the S32K146EVB but with more on-chip memory and
24811 - CXD56xx: Migrate CXD56xx common code to the common/ directory:
24813 - CXD56xx: Add SPH. The SPH is used by the ASMP implementation from
24818 - CXD56xx: Add sensors connected to the SCU on Spresense board:
24831 - CXD56xx: Add the sensor initialization for CXD56xx boards in the
24856 - Spresense: Enable SmartFS and UDP support From Masayuki Ishikawa.
24860 - STM32F4 PLLI2S: Add support to enable the I2S Phase Locked Loop on
24865 - STM32 ADC: Add ADC calibration procedure for IP_ADC_V1. Tested on
24869 - STM32 SPI: TI Synchronous Serial Frame Format. The SPI macros on
24872 and add support for it in stm32_spi.c. From Michael Jung.
24873 - STM32 UART: Serial add HW HS on UART 4 & 5. From David Sidrane.
24874 - STM32 PWM: Configure multi-channel duty only if channel specified.
24875 This allows you to update duty cycle for a single channel. From
24877 - STM32F7 Ethernet: Add a timeout on MAC reset From David Sidrane.
24878 - STM32F7 FLASH: Exposes stm32_flash_xxx functions. From Anthony
24880 - STM32F7 PWM: Configure multi-channel duty only if channel specified.
24881 This allows you to update duty cycle for a single channel. From
24883 - STM32F7 UART: Serial add HW HS on UART 4 & 5. From David Sidrane.
24884 - STM32H7 ADC: Fix internal channel numbers. From Markus Bernet.
24885 - STM32H7 BBSRAM: Add BBSRAM support. From David Sidrane.
24886 - STM32H7 DTCM: Port DTCM from F7 From David Sidrane.
24887 - STM32H7 I2C: Select ARCH_HAVE_I2CRESET in configuration. From
24889 - STM32H7 PWM: Configure multi-channel duty only if channel
24890 specified. This allows you to update duty cycle for a single
24892 - STM32H7 RCC: Fix RCC register definitions and typos for ADC/UART.
24894 - STM32H7 RTC: Ported over F7 RTC. From David Sidrane.
24895 - STM32H7 SPI: Allow more clock sources. From David Sidrane.
24896 - STM32H7 UART: Serial add HW HS on UART 4 & 5. From David Sidrane.
24897 - STM32H7 UART: Fix typo in UART8 configuration. From Markus Bernet.
24898 - STM32H7 UID: Ported UID from F7 From David Sidrane.
24899 - STM32L4 PWM: Configure multi-channel duty only if channel specified.
24900 This allows you to update duty cycle for a single channel. From
24902 - STM32L4 UART: Serial add HW HS on UART 4 & 5. From David Sidrane.
24906 - B-L475E-IOT01A: Add mx25rxx memory chip and smartfs support in NSH
24908 - LX_CPU: Add support for the PIKRON LX_CPU board. From Pavel Pisa.
24909 - Nucleo-F303RE: Add basic NSH configuration. From Mateusz Szafoni.
24910 - Nucleo-F303RE: Enable console on UART2 and set entry point to
24912 - Nucleo-H743ZI: Add RTC support. From David Sidrane.
24913 - Nucleo-L432KC: Added GPIO drivers for use with /apps/examples/gpio.
24915 - Nucleo-L432KC: Added Zero Cross sensor to nucleo-l432kc. From
24920 - Tiva: Add support for Tiva TM4C123AH6PM. From Nathan Hartman.
24921 - Tiva Configuration: Modify preprocessor logic to support
24922 configurations with no UART. Now similar to logic for other
24924 - Tiva Interrupts: Add handling for IRQs 128 through 159. From Nathan
24929 - TM4C QEncoder: Reinstate TM4C qencoder driver and expand its
24941 - TM4C1294-Launchpad: Enables /dev/userleds in board bring-up for
24942 tm4c1294-launchpad by calling userled_lower_initialize() in
24947 - Tiva GPTM timers: Implement 16-bit PWM mode. Add
24950 16-bit timer logic. Add tiva_timer16pwm_setperiodduty() to set
24955 flags to enable configuring the 16-bit PWM feature. Extend type of
24956 "flags" in tiva_timer32config_s and tiva_timer16config_s from 8- to
24957 32-bits to allow more flags. From Nathan Hartman.
24961 - Export Build: Export all variables/files to support architecture
24963 - Application Export: This change too build tools allows to export
24964 built-in applications registry into temporarily created directory
24968 print warning but there is no way instruct apps make to not print
24970 - boards/Board.mk: Add support to pass dependency paths. From
24975 - libs/libc/libc.csv: Add some missing C library functions. From
24977 - libs/libc/libc.csv: Add ioctl() to fs_ioctl() wrapper for varidic
24979 - libs/libc/builtin/: Moves shared built-in information out of
24981 with applications. This should permit built-in application in the
24984 - libs/libc/dirent/: Added alphasort() implementation, scandir()
24988 - libs/libc/grp/: Added stubbed implementations of getgrgid,
24994 - libs/libc/machine/arm/armv7-m/: Add Cortex M4F machine optimized
24996 - libs/libc/pwd/: Added stubbed implementations. Added stubbed
25003 - libs/libc/pwd and libs/libc/grp/: Modify to get user/group data
25006 - libs/libc/stdio/: Add support for the size_t integer qualifier 'z'
25009 - libs/libc/unistd.h: Added stubbed implementations of setuid() and
25016 - libs/libc/unistd/: Add getuid() and getgid() stubs to match
25018 - libc/libc/unistd/: Add stubs for geteuid(), getegid(), seteuid(),
25026 - NuttX provides lists of available syscalls and library functions and
25037 mechanisms for library compilation in different kernel protection
25038 modes but tested only flat no-MMU build. The basic assumption is
25039 that this library and libraries providing syscall stubs and C-
25040 library functions are available in user-space context and initial
25043 address space as kernel allows. Simple for flat or protected mode,
25055 - tools/: Change preferred argument of configurations tools to use
25056 ':' as the delimiter between <board-name> and <config-name>. This
25061 delimiter. Update all configuration-related tools to accept ':'
25066 - Makefile: Added support for application-specific export target.
25068 - apps/builtins: Move apps/builtins/builtin_forindex.c to
25070 well. Other changes account for movement of builtin.h from
25076 - apps/examples/uid: Demo used to verify PASSWD and GROUP interfaces.
25078 - apps/examples/webserver/: Initialilze network and run forever only
25079 if not built-in app. Infer from CONFIG_NSH_BUILTIN_APPS if we are a
25080 NSH built-in app or not. If built-in app (CONFIG_NSH_BUILTIN_APPS
25088 - apps/fsutils/passwd: Handle the improved the format of the
25094 - apps/netutils/dhcpc: Add host name support to DHCP client. From
25099 - apps/wireless/ieee802154/i8sak: I8sak improvements: (1) Adds
25100 support for getting/setting maxretries and promsicuous mode from
25104 - apps/wireless/ieee802154/i8sak: Allow setting the endpoint PAN ID.
25106 - apps/wireless/ieee802154/i8sak: Adds support for energy scan result
25108 - apps/wireless/ieee802154/i8shark: Adds support for intentionally
25111 - apps/wireless/ieee802154/libmac: Adds support for getting/setting
25113 - apps/wireless/gs2200m: Add UDP support to the GS2200M driver. From
25115 - apps/wireless/gs2200m: Add DHCP client handling in ioctl_request().
25117 - apps/wireless/gs2200m: ioctl_request() supports SIOCGIFHWADDR.
25121 ---------
25122 Only the most critical bugfixes are listed here (see the ChangeLog for a
25123 more complete list of bugfixes and for additional, more detailed bugfix
25128 - Priority Inheritance: Fix a race in telnet with PRIORITY_INHERITANCE
25131 - Task Groups: Correct some naming. The NuttX task groups have been
25132 using the acronym 'gid' and also the type 'gid_t' for the the task
25133 group ID. That is incorrect. Than naming is reserved for use with
25137 - Task Termination: nxtask_signalparent() in task_exithook.c may
25149 - sched_get_rr_interval(): sched_get_rr_interval() should return
25150 {0,0} if round-robin scheduling is not selected for the task. From
25152 - SMP Type Collision: The non-standard, non-portable type cpu_set_t
25156 occurred. cpu_set_t has an equivalent, non-standard, non-portable
25158 non-standard type to be defined. Who am I to stand in the way of
25162 - Binary Loader: Change some debug macros from berr() to binfo()
25168 - Power Management: Fix g_pmcount 16-bits overflow when
25170 - Timekeeping: Fix cases in time conversion that must be >=
25175 - opendir(): opendir() set errno to a negative value in one error
25177 - SmartFS: Update smartfs smart_scan() function. From Simon Piriou.
25178 - ProcFS: Add missing LF to cpuload procfs output From David Alessio.
25179 - MMC/SD: Copy/paste error fix in the SDIO-based block driver for
25181 - MMC/SD: Correct a misplaced #endif in the SDIO-based driver. From
25186 - Ethernet Configuration: Ethernet packet buffer size cannot be
25188 - TCP RST: Fix outgoing RST packet with wrong ack number. From
25190 - TCP Close: Fix TCP close flow; free the connection after all TCP
25192 - UDP Broadcast: Remove net stack dependency from CONFIG_NET_BROADCAST.
25196 - UDP: Fixes a UDP send copy-paste error in the new SO_LINGER code:
25198 - TCP and UDP: Fix errors in the new implementation of SO_LINGER.
25207 - 6LoWPAN: Removes unnecessary conversions that were happening due to
25208 a misunderstanding of byte ordering with EUI-64. From Anthony
25210 - RNDIS: Fix issue with DEBUGASSERT when using composite device and
25215 - wireless network devices: Attach radio to d_buf before registering
25225 - IEEE 802.15.4 MAC: Fixes issues with extended address. 1) Extended
25226 address should be read-only. 2) Extended address should be placed
25227 in frame in "reverse-canonical" order. The extended address is a
25228 read-only attribute and thus an attempt to write the extended
25231 bring-up time to the radio layer. The MAC layer now pulls in the
25234 reverse-canonical order. This is very confusing in the standard and
25237 committee for suggestions/feedback on the future standard. It isn't
25240 written in reverse-canonical form, meaning the OUI comes last, not
25242 - IEEE 802.15.4 MAC: Frame Version should have been 1, but was being
25244 to build to indicate what is noted in the menu for
25246 - IEEE 802.15.4 MAC: Fixes issue where the txdesc's ackreq flag was
25249 - Xbee: Fix logic to prevent deadlock scenario when there are no
25250 available IOBs From Anthony Merlino (2018-12-21).
25251 - Xbee: Change assumption about destination address mode for incoming
25255 - Xbee: Initialize the short address to the unspecified address and
25256 query for the extended address on initialization. From Anthony
25258 - Xbee: Adds CONFIG_XBEE_LOCKUP_WORKAROUND option and corresponding
25268 - Xbee: Cancel query timeout upon receiving the expected response.
25269 Add protection for race condition that can cause association
25271 - Xbee: Detect lockup and reset XBee in xbee_req_data From Anthony
25273 - Xbee: Fixes one instance of the use of IOBUSER_WIRELESS_MAC802154
25281 - pipes: Use inode reference counter instead of device reference
25288 - SPI Bitbang: Fix build error when the SPI bitbang variable width
25290 - GPIO Lower Half: Remove limitation when pintype >
25295 - Classic ARM7/ARM9: When performing stability test, the application
25304 * ARMv7-A
25306 - ARMv7-A: Fix typo and missing quotation for ARMv7-A. From Oki
25308 - ARMv7-A: Fix double increment in armv7-a's
25310 - ARMv7-A: Fix L2 page table mask for ARMv7-A page allocator. From
25313 * ARMv7-M
25315 - Interrupts. Removes the architecture-common
25317 supported only by ARMv7-M). In the normal course of things,
25320 be shared between interrupt level and non-interrupt level logic.
25336 - ARMv7-M Priorities: In the 'normal' case, the priority of the
25346 - i.MXRT ENC: Fix some errors in register bit definitions. Noted by
25348 - i.MXRT LPI2C: Slave addresses are now correctly shifted when
25356 - PIC32MZ SPI: Fix SPI Mode selection. CKE is the inversion of the
25361 - SAMD2/L2 I2C: Correct time calculation. From Bernd Walter.
25365 - SAM3/4: Add missing DMA configuration Kconfig setting. From Bernd
25370 - LPC17xx/40xx ADC: Only use PCLKSEL0 for ADC on LPC176x family.
25372 - LPC17xx/40xx Ethernet: Set speed back to 10Mbps if 10Mmbps link
25374 - LPC17xx/40xx I2C: Abort I2C transfers if a timeout has occurred.
25378 memory corruption / undefined behavior as priv->msgs points to a
25381 - LPC17xx/40xx I2C: Calculate the appropriate timeout for I2C
25390 - Kinetis I2C: i2c transfer ensure correct result returned.
25397 - LPC17xx/40xx CAN: If BOARD_CCLKSEL_DIVIDER is not equal to 1 on
25400 used for PCLK. This is partially workaround solution. It would
25401 be probably better to define BOARD_PCLK_FREQUENCY even for LPC176x
25407 - LPC17xx/40xx Ethernet: Add missing LPC17_40_PHY_CEMENT_DISABLE
25408 variable to the lpc17xx/40xx Kconfig file. For some reason this
25411 - LPC17xx/40xx Ethernet: Fix the initialization for DP83848x PHYs.
25414 it should wait for the link to be established. From Augusto Fraga
25419 - i.MXRT LPUART: Fix some errors in the LPUART register definition
25421 be imxrt_earlyserialinit(). Remove prototypes for non-existent
25423 - i.MXRT USDHC: uSDHC typo fixes and command transfer error handling
25428 - EFM32 OTG host: Adam Porter's various fixex for STM32 FS/HS
25434 - STM327F Configuration: Kconfig add depends on BBSRAM. From David
25436 - STM32F7 Interrupts: Fix overwritten IRQ enable. System boot order
25441 - STM32H7: Rix BBSRAM name in memory map. From David Sidrane.
25442 - STM32H7: Removed f7 in file path. From David Sidrane.
25446 - STM32H7 BBSRAM: Fix issues causing no writes and hardfaults. From
25448 - STM32H7 BBSRAM: Convince compiler to perform 32 bit write. From
25450 - STM32F7 OTGHS: Fixes bad preprocessor logic preventing USB OTG HS
25452 - STM32 OTGH[FS|HS] Host STM32 host only initiates transfer if
25454 - STM32F7/H7/L4 OTG host: Adam Porter's fix for STM32 FS/HS probably
25457 - STM32/F7/H7/L4: This change was required to get my devices
25458 (CDC-MBIM) to enumerate. Initially the system timed out retrieving
25468 - STM32F7 SDMMC: If there is only one SDMMC it is slot 0 From David
25470 - STM32F7 USART1: USART1_RXDMA is dependent on STM32F7_DMA2 not
25472 - STM32H7 DBGMCU: Memory Map DBGMCU is @ 0x5c001000 From David
25474 - STM32F7 SDMMC: Fix warning when DMA is not enabled. From David
25476 - STM32H7 Ethernet: Fix some errors in Ethernet MAC configuration.
25478 - STM32H7 Ethernet: Correct stm32h7 mac address filtering. Correct
25482 - STM32H7 Ethernet: Correct memory corruption error. The Ethernet
25488 - STM32H7 PWR: Ensure data is flushed on backup domain access
25490 - STM32H7 Serial: Serial fix undefined with TERMIOS From David
25492 - STM32H7 UARTs: Fix UART7/8 typos. Fix bug in ETH_MACQTXFCR
25497 - Multiple STM32 Boards: If CONFIG_SCHED_CRITMONITOR is selected,
25501 - Nucleo-H743ZI: Correct logic that determines if the RTC driver is
25503 - Nucleo-G071RB: Fix linker script to avoid .ARM.exidx section
25505 - Modify all linker scripts (all boards, all architectures) to use
25507 - Nucleo-L432KC ADC: Change analog pins definitions and correct DMA
25512 - Tiva Configuration: Rename TM4C123GH6PMI identifiers to
25514 is no functional difference between these parts: TM4C123GH6PMI7,
25518 PMI. (The PM means 64-LQFP. The I means temperature range -40C to
25519 +85C. It could be T meaning -40C to +105C. The R means it ships in
25521 - Tiva Configuration: Rename TM4C1294NC identifiers to TM4C1294NCPDT.
25522 Rationale: TM4C1294NC is ambiguous: TM4C1294NCPDT is a 128-TQFP,
25523 TM4C1294NCZAD is a 212-NFBGA. The TM4C1294NC part currently
25524 supported by NuttX is the TM4C1294NCPDT used on the TI EK-TM4C1294XL
25525 "Connected LaunchPad" (see configs/tm4c1294-launchpad). To ensure
25528 - Tiva Configuration: Fix TM4C129XNCZAD part number in Kconfig and
25529 identifiers. Rationale: Fully specify that this is the 212-pin BGA
25530 package (ZAD ending) and for consistency with earlier changes to
25536 - Tiva TM4C 1-Wire: Fix wrong description on define TIVA_1WIRE_BASE:
25537 Was "EEPROM and Key Locker" (same as the item above). Now "1-Wire
25538 Master Module." Make DMACTL symbols visible for TM4C123: Remove
25543 - Tiva GPIO Interrupts: LM3S, LM4F, TM4C: Fix GPIO IRQ error, ports
25544 R, S, T. Preprocessor logic for CONFIG_TIVA_GPIOx_IRQS was setting/
25546 gpioport2irq() was missing handling for port T. From Nathan
25548 - Tiva Timers: Fix minor errors in tiva_timerlib.c. Fix incorrect
25550 CONFIG_TIVA_TIMER32_EDGECOUNT -> CONFIG_TIVA_TIMER16_EDGECOUNT,
25551 CONFIG_TIVA_TIMER32_TIMECAP -> CONFIG_TIVA_TIMER16_TIMECAP,
25552 CONFIG_TIVA_TIMER32_PWM -> CONFIG_TIVA_TIMER16_PWM. From Nathan
25554 - Tiva Timers: Fix errors in low-level timer support.
25559 - Tiva Timers: Fix one code error and some comment errors.
25566 - z80sim Serial: Fix uart_dev_t initializer: pollfds[] is a array of
25569 - z80sim Interrupts: Missed a name change up_irqinitialize to
25574 - include/netinet/in.h: Rename __pad member to sin_zero in struct
25584 sin_family, sin_addr, and sin_port. It is acceptable for a POSIX-
25586 this is normal for an Internet socket address structure. Almost all
25590 - libs/libc/libc.csv: Correct dependency of setlocale on
25592 - libs/libc/machine/arm/armv7-m: Fix build error for ELF. From
25594 - libs/libc/math.csv: Correct format of some function entries. From
25599 - tools/: Change all occurrences of /bin/(ba)sh in shell scripts to
25604 - apps/nshlib/: As noted by David S. Alessio, 'cat' should not output
25614 correct behavior for 'cat' it may not be the correct behavior for
25620 - apps/system/cle/: ASCII DEL should be treated by Delete-Left. From
25622 - apps/system/i2ctool: (1) Friendlier I2C "knock-knock" uses only
25624 registers, some have only one register and it's not indexed. For
25632 Reg[80]-Reg[8F] and will NAK a read of Reg[0]. (2) Modify get/set
25637 - apps/netutils/dhcpd: Fixes bug where hwaddr was being used instead
25642 address, but then send a ARP request for the IP instead because it
25644 - apps/netutils/netinit/: Remove warnings. Unhook PHY notification
25650 - apps/wireless/ieee802154/i8sak: Fixes conversion from extended
25653 NuttX-8.2 Release Notes
25654 ------------------------
25657 and is available for download from the Bitbucket.org website. Note
25658 that release consists of two tarballs: nuttx-8.2.tar.gz and
25659 apps-8.2.tar.gz. These are available from:
25664 Both may be needed (see the top-level nuttx/README.txt file for build
25668 ---------------------------------------------------
25672 - Signals: Add support for SIGPIPE default action. SIGPIPE uses
25675 - Spinlocks: Remove support for re-entrant spinlocks. They seemed
25677 - Memory Manager: Remove the assumption that one character equals
25679 - Power Management: Historically, the NuttX PM subsystem has
25683 This change decouples that upper activity-based logic from the lower
25685 logic (such as a custom, application-specific state machine). From
25687 - boardctl(): Expose power manager function through boardctl()
25692 - GD25: Add support for a new FLASH vendor. From zhangbo_a.
25693 - GD25: Add support for GD25 device with 256-Mbit capacity. From
25695 - GD25: Add 4-byte address operation for capacity larger than
25696 128-Mbit. From YanLin Zhu.
25697 - GD25: Add gd25_lock/unlock to case: enable 4-bytes address From
25699 - GD5F: Add gigadevice SPI NAND FLASH driver. From YanLin Zhu.
25703 - Networking: Use ntoh() when printing IPv6 addresses so that the
25706 - Netlink: Implement minimal NETLINK_ROUTE socket functionality that
25707 can (for now) be use used to obtain a list of network devices, IPv4
25708 ARP and IPv6 Neighbor tables, and IPv4 and IPv6 routing tables.
25713 - BCM43438A1 Bluetooth: Add support for the BCM43438A1 Bluetooth
25715 - HCIUART Shim: Add a serial 'shim' to allow any regular serial port
25718 - BCM4343x HCIUART: BCM4343x HCIUART support. From Dave Marples.
25719 - BCM43xxx: Move drivers/wireless/ieee80211/ to
25722 - GS2200M: Add reset handler to interface. Add reset and un-reset
25727 - Audio: Add message type to support audio trigger. From anchao.
25731 - Altair: Add support for the altair LTE modem driver. From Alin
25733 - MCP2515: MCP2525 SPI STD-EXT ID fixes. From DisruptiveNL.
25734 - OpenAMP: Brings in the drivers needed to support OpenAMP. These
25743 - Simulator: Add stack coloration feature. From ligd.
25744 - Simulator: Report PM activity on simulated UART. From Matias
25746 - Simulator: Add host ftruncate() support. From chao.an.
25747 - Simulator: Replace all CONFIG_DEV_CONSOLE with USE_DEVCONSOLE for
25750 - Simulator OpenAMP: Support OpenAMP between two simulator
25752 boards/sim/sim/sim/README.txt for more information. From chao.an.
25754 * ARMv7-M
25756 - ARMv7-M: Add BPIALL register address. From Dave Marples.
25757 - ARMv7-M MPU: Add user peripheral helper
25761 - Arduino-M0: Add initial board support for the Arduino M0 which is
25767 - i.MXRT LCD: Add support for LCD. Clean up some LCD-related
25769 - i.MXRT Serial: This change improves the performance of UART serial
25773 - i.MXRT Pin Mux: This change separates out the pinmux and iomux
25774 functions cleanly. For ease of conversion default IOMUX definitions
25776 things: (1) unifies the iomux definitions - previously some pins
25783 - IMXRT1020-EVK: Add support for the MIMXRT1021-EVK board. It
25789 - IMXRT1060-EVK: Add basic LCD support for the board IMXRT1060-EVK.
25791 - IMXRT1060-EVK: Added Littlevgl demo configuration into the
25792 IMXRT1060-EVK board directory. From Fabio Balzano.
25796 - Kinetis Ethernet: Add support for TJA1100 PHY. From David Sidrane.
25800 - S32K1xx: Support configuration and initialization of the flash
25805 - S32K1**EVB: Create a special FLASH section to hold the FLASH
25807 - S32K146EVB: Added configuration script and instructions for using
25808 Thread-Aware OpenOCD for the S32K146 with Eclipse. From Han
25813 - RX65N: Adds a port of to the Renesas RX65N Micro-controller. This
25819 - RSK RX65N-2MB: Add support for the RSK RX65N-2MB board. From
25821 - GR-Rose: Add support for the GR-Rose board. From Anjana.
25825 - CXD56xx CPU FIFO: Add configurations for CPU FIFO elements. From
25827 - CXD56xx Loader: Update loader and gnssfw ver. 17660. From Alin
25829 - CXD56xx SMP: Add support for SMP. To run cxd56xx in SMP mode, new
25832 - CXD56xx SMP: Add IRQ routing for SMP in cxd56_irq.c. In CXD56xx,
25834 APP_DSP (Cortex-M4F) only. This change supports IRQ routing for SMP
25840 - CXD56xx I2C: Add ability to set the i2c frequency to other than just
25842 - CXD56xx SDHCI: Reduce power consumption by stopping SD clock. Re-
25848 - CXD56xx Board Common: Add the Altair LTE modem support on the
25850 - CXD56xx Board Common: Add Spresense Image Processor. Enable support
25851 for accelerated format converter, rotation and so on. using the CXD5602
25853 - Spresense: Add board specific pin configurations of CXD5602 pins to
25855 - Spresense: Add a configuration option to select if an extension
25856 board is attached to the SPresence. If there is no extension board
25857 attached, the SPresense may run in a low-power mode by default (as
25862 - Spresense Camera: Add ISX012 camera initialization and
25864 - Spresense OS test: Enable ostest in rndis/defconfig and
25866 - Spresense: Add --gc-sections to LDFLAGS and add -ffunction-sections
25867 and -fdata-sections to ARCHCFLAGS in scripts/Make.defs. From
25869 - Spresense SMP: Add smp configuration. From Masayuki Ishikawa.
25870 - Spresense SCU: The SCU has to be initialized at bootup on Spresense
25872 definitions. Add configuration for the audio implementation. From
25874 - Spresense: Add audio and board audio control implementation. From
25876 - Spresense: Sdd power_control and audio_tone_generator. Add a simple
25877 way to control the audio buzzer with defined frequency for user-space
25879 - Spresense: Add the optional initialization of GNSS and GEOFENCE at
25881 - Spresense: Add LTE configuration. From Alin Jerpelea.
25882 - Spresense: Enable high current mode for the Spresense Extension
25884 - Spresense: Add lcd examples configuration. This is a configuration
25885 for the basic nx examples From Alin Jerpelea.
25889 - STM32F0/L0/G0: Add support for STM32G070xx family. From Daniel
25891 - STM32F0/L0/G0 Power: Scale dynamic voltage and flash wait states
25894 - STM32L4R5ZI: Add support for the STM32L4R5ZI chip type. From Jussi
25896 - STM32 L4+ DMA: Add DMA support for STM32L4+ series. From Jussi
25898 - STM32 L4 Clocking: Enable "Range 1 boost" mode if any PLL freq
25900 - STM32 L4 LPTIM: Add support for LPTIM timers on the STM32L4 as PWM
25902 - STM32 H7 Progmem: Add FLASH progmem support. From David Sidrane.
25906 - STM32 Serial: Single Wire add pull{up|down|none} via new IOCTL
25908 - STM32 F0/L0/G0 Serial: Single Wire add pull{up|down|none} via
25910 - STM32 F0/L0/G0 PWM: Add PWM support. From Daniel Pereira Volpato.
25911 - STM32 G0 TIM: Support timers available on STM32G070. Includes TIM1
25912 PIOs, TIM driver lower-half. From Daniel Pereira Volpato.
25913 - STM32 F7 Serial: Single Wire add pull{up|down|none} via new IOCTL
25915 - STM32 H7 BBSRAM: Exclude BBSRAM from cacheable when
25918 BBSRAM memory range to non-cacheable. From David Sidrane.
25919 - STM32 H7 SDMMC: Add SDMMC support and IDMA as well as interrupt
25920 driven transmission. Support pull-ups and SDIO. From David Sidrane.
25921 - STM32 H7 Serial: Single Wire add pull{up|down|none} via new IOCTL
25923 - STM32 L4 OTGFS: Enable OTGFS for STM32L4+ series. The OTGFS
25926 - STM32L4 IDLE Loop: (1) Added BEGIN_IDLE()/END_IDLE() to stop call
25931 - STM32 L4 Serial: Single Wire add pull{up|down|none} via new IOCTL
25936 - Nucleo-G070RB: Initial support for board STM32 NUCLEO-G070RB,
25937 including NSH config. Enables PWR peripheral and set SYSCLK to
25939 - Nucleo-G070RB: Enable basic timers. Add TIMx clock frequencies to
25941 - Nucleo-G070RB: Add PWM support and GPIO_TIM3_* mappings. Add a PWM
25943 - Nucleo-G070RB: Add button driver support, Add driver support. Add
25945 - Nucleo-L476RG: Add required definitions if libcxx is enabled. From
25947 - Nucleo-L476RG: Add support for LPTIM timers as PWM outputs. From
25949 - Nucleo-H743ZI: Added GPIO device driver for user-space apps. From
25951 - olimex-stm32-e407: Newer Olimex E407 boards are populated with
25953 - STM32F4-Discovery: Add support for external DS1307 module. From
25955 - STM32F4-Discovery: Add support for MMCSD_SPI. This change works
25958 - STM32F4-Discovery: Add support for gs2200m. Works with mikroe
25963 - TM4C129ENCPDT: Add support for Tiva TM4C129ENCPDT. From Nathan
25968 - TM4C123G-Launchpad: SPI CAN functionality on TM4C123GXL. From
25973 - tools/Config.mk: Eliminate use of the built-in implicit rules.
25975 - tools/Config.mk and Makefile.unix: Support the incremental build
25976 for configuration change. From Xiang Xiao.
25977 - tools/Config.mk: Support the ability to change the CFLAGS for
25979 follows the rule: sourcefile + fixed suffix "_[A|C|CPP|CXX]FLAGS".
25980 For example in apps/examples/hello/Makefile:
25981 $(SRCDIR)/hello_main.c_CFLAGS = -DTEST. From Xiang Xiao.
25982 - Configuration: Auto-select CONFIG_BUILD_LOADABLE when either
25988 - libs/libc: Add CONFIG_MODLIB_SYSTEM_SYMTAB to generate the symbol
25989 table for dlopen/insmod. From Xiang Xiao.
25990 - getdelim() and getline(): Add implementations of the POSIX
25992 defined, getline() cannot be used on platforms that use CR-LF lin
25994 - alarm(), setitimer(), and getitimer(): Implement alarm(),
25999 - tools/mkexport.sh: Copy the essential build script files too and
26000 move Make.defs/gnu-elf.ld into scripts like board folder layout.
26002 - tools/mkexport.sh: Should export full content for FLAT build even
26004 - tools/testbuild.sh: Add an option to select the number of CPUs to
26006 - tools/indent.sh: Add a command line option to suppress reformatting
26010 - tools/nxstyle.c: Add detection of carriage returns. Improve
26012 - tools/nxstyle.c: Add logic to detect if there is a blank line
26014 - tools/nxstyle.c: Eliminate false alarm errors on comments that are
26017 - tools/nxstyle.c: Eliminate false alarms when checking for
26018 alignment of comments to the right of code. Fix check for C++ style
26021 - tools/nxstyle.c: Eliminate false positive 'Invalid character after
26026 - apps/ Build System: Numerous changes for improvements and general
26027 clean-up of the apps/ build system. Too many small and individual
26031 - apps/Application.mk: Support the ability to change the CFLAGS for
26033 follows the rule: sourcefile + fixed suffix "_[A|C|CPP|CXX]FLAGS"
26035 $(SRCDIR)/hello_main.c_CFLAGS = -DTEST
26037 - apps/Application.mk and main.c files: Change builtin's entry point
26044 - apps/examples/audio_rttl: Add a simple RTTL player demo that is
26046 - apps/examples/bmi160: Add bmi160 example app. This app will read
26048 - apps/examples/charger: Simple charger example that will display on
26050 - apps/examples/netlink_route: Add test/example of NETLINK_ROUTE
26055 - apps/nshlib/: Add rptun cmd for boot remote core. From ligd.
26056 - apps.nshlib/: Add a -t option to the arp command which will enable
26058 - apps/nshlib/: Add new NSH command, 'pmconfig'. From ligd.
26062 - apps/system/cle: Add basic color support to the CLE editor.
26064 - apps/system/i2c: While many I2C slave devices have multiple
26066 For example, the I2C bus switch TCA9548A has only a Control
26073 number at Reg[80]-Reg[8F] and will NAK a read of Reg[0]. Modified
26075 - apps/system/i2c: Added a 'dump' command to issue a single
26078 - apps/system/spi: Add options to specify devtype, id for chip
26080 - apps/system/symtab: Remove system/symtab since the same
26082 - apps/system/usrsock_rpmsg: Add rpmsg based usrsock implementation.
26087 - apps/netutils/cjson/: Update default version to 1.7.12. Previous
26090 - apps/netutils/netlib/: Add a function to read the entire ARP table
26092 - apps/netutils/netlib/: Add support for retrieving a snapshot of the
26094 - apps/netutils/netlib/: Add a utility function that will return a
26096 - apps/netutils/netlib/: Add function to retrieve routing tables
26100 ---------
26101 Only the most critical bugfixes are listed here (see the ChangeLog for a
26102 more complete list of bugfixes and for additional, more detailed bugfix
26107 - Signals: Fix undefined reference from sig_default.c to
26110 - waitpid(): Fix a NULL pointer dereference on race without
26112 - WD Timers: Back out a kludge-workaround in wd_start for an SDCC
26115 options and SDCC no longer needs the work-around. From Gregory
26117 - clock_systimespec(): Fix early timespec overflow if using 32 bit
26119 - Spinlocks: spin_trylock handle memory barrier and instrumentation
26121 - Power Management: Fix a problem where a timer cannot start when it
26123 - boardctl(BOARDIOC_MKRD): This change corrects a problem with NSH:
26128 - boardctl(BOARDIOC_ROMDISK): Add support for the new
26134 - SmartFS: Fix O_CREAT without O_TRUNC truncating existing file.
26137 - SmartFS: Honor O_APPEND on writes. Also document pwrite() bug/
26139 - GD25: spi_devid argument was not used in initialization. GD25
26140 driver was always using priv->spi_devid initialized to zero by
26143 - MMC/SD: Set wrbusy after success of all the operations. Any
26146 - MMC/SD: Enter a removed card state On a failure. If we fail to
26149 - MMC/SD (SDIO): Align DMA buffer for MBURST size. From David S.
26154 - Socket close(): Fixed problems noted by Bernd Walter: Eliminate an
26162 - ICMPv6: Dispatch ICMP_POLL to device's callback list too since
26165 - ICMPv6: Decouple autoconfig and ICMPv6 socket to avoid an invalid
26167 - ICMPv6: cmpv6_autoconfig() error handling must not overwrite
26169 - TCP/UDP: Fix a chicken and egg problem by eliminating the check of
26171 1. For buffered TCP/UDP case, if CONFIG_NET_ARP_SEND /
26173 and the table doesn't contain the Ethernet address for the
26177 2. For all other case, the TCP layer or user program should already
26184 - UDP sendto(): Add a check for the device that is polling. In the
26190 - MRF24J40: Correct erroneous isolation of address mode field and
26192 - GS2200M: Add SPI_SELECT() to _read/write_data() in gs2200m.c
26193 - BCM43xx Wireless: In the SDIO interface, the behavior of the DMA
26197 modified this file for the i.MXRT USDHC which does have the
26206 - Various drivers (Cloned logic): On error, memory was freed, but
26207 the error was not returned. It just continued as though no error
26209 - Serial: Fix data corruption when outputting data in SMP mode From
26211 - Serial: serial_io.c used signal numbers, but did not include
26212 signal.h. This has no problems but missing signal definitions have
26214 - Serial DMA: Avoid uart_xmitchars_done() move the tail bigger then
26219 - mkfifo(): mkfifo() should return -1 and set errno on failure From
26221 - RAMLog: Fix ramlog readers never awakened up when using ramlog as
26225 is no point of wasting precious RAM for useless characters. From
26227 - USB CDC/ACM: Fix memory leak of RX failsafe timer. From Juha
26229 - USB HID Keyboard device: Fix keyboard debounce algorithm used when
26231 - USB HID Keyboard: Change default for CONFIG_HIDKBD_POLLUSEC per
26233 - VL53L1X IOCTLs: IOCTL commands for the VL53L1X did not follow the
26235 - syslog: syslog_force does not set errno so do not test against it.
26237 - syslog: Fix assertion that assumes re-opened syslog file is the
26239 for the default syslog device as a recovery action after failed
26244 - Simulator HostFS: Skip '.' and '..' in readdir' From Xiang Xiao.
26245 - Simulator HostFS: Fix warning: 'mapflags' may be used uninitialized
26247 - Simulator Tickless: Correct the calculation of the Tickless timer
26250 - Simulator: Add -m32 to HOSTLDFLAGS if enable CONFIG_SIM_M32. From
26252 - Simulator PM: Fixes compilation for sim target when enabling power
26254 - Simulator Build: Fixes missing recursion into sim board directory
26255 for dependency generation. From Matias N.
26256 - Simulator SIMUART: Remove CONFIG_SIM_UART_DATAPOST for arch/sim.
26260 * ARMv7-A
26262 - ARMv7-A: Apply Masayuki Ishakawa's change for ARMv7-M to this SMP
26265 * ARMv7-M
26267 - ARMv7-M: Fix a deadlock in up_sigdeliver() in SMP mode. In
26270 the following situation. For example, if up_sigdevliver() is in
26280 - SAM4CM: Fix cpustart() implementation. In Cortex-M, offset 0 in
26286 - SAMA5D4-EK: Fix bad conditional compilation for
26292 - i.MXRT WFI: WFI needs to be disabled on i.MXRT. We found the
26293 reason: The imxrt1050 is configured to use SYSTICK for the kernel
26294 timer, but SYSTICK cannot wake up the MCU from low-power modes.
26295 Disable low-power modes on this MCU until we have support for an
26297 had A0 silicon which by default did not enter low-power mode on a
26304 - i.MXRT Serial: TC (Transmission complete) and TDRE (TX Buffer
26306 for unoptimized code everything worked fine, but optimized code got
26312 - IMXRT1020-EVK: Make naming of the LED consistent. In most places
26314 USERLED1. The i.MXRT1020-EVK hardware user guide (HUG) uses the
26321 - TWR-K60N512: Suppress errors related to card detect GPIO
26326 - lpc17xx/40xx I2C: Respect the I2C_M_NOSTART flag. Sending a
26329 - LPC17xx/40xx Ethernet: Use usleep() instead of up_delay() for large
26334 - LPC54 Clocking: Fix PLL settings. For the lpc54628 Rev. E board
26337 inspected the assembly instructions for the libraries used. From
26342 - IMXRT1060-EVK: Fix FT5X06 CTRSTn pin configuration, increased
26343 number of pollwaiters for the FT5X06, tuned resolution during
26348 - LC823450: Fix cpustart() implementation. In Cortex-M, offset 0 in
26351 - LC823450-XGEVK: Fix build error for posix_spawn. From Masayuki
26356 - CXD56xx Assertions: Replace some assertions with error return
26358 - CXD56xx Interrupts: Fix hang-up when error interrupt occurs. From
26360 - CXD56xx Pin Configuration: PIN_AP_CLK is used as a port selector of
26366 - CXD56xx: Remove duplicate NVIC_SYSH redefinitions. The NVIC_SYSH
26371 - CXD56xx SDHCI: Fix initial value of semaphore in sdhci driver.
26376 - Spresense: The SD Card TXS02612 port expander is hosted on the
26382 - STM32 F4 Pin Multiplex: Ethernet pin ETH_RMII_REF_CLK is an input.
26384 - STM32 H7 ADC: Fix typos in ADC register definitions. From Markus
26386 - STM32 H7: Heap allocation, SRAM and SRAM1 are not continuous From
26388 - STM32 H7 CRC: Add the CRC option in KConfig. From Eduard Niesner.
26389 - STM32 H7 RCC: Add PLL3 Support and only enable PLLs if used. From
26391 - STM32 L4x6xx RCC: This fix is needed if HSI clock is selected.
26397 - STM32 USB Host: There was no relationship between
26405 - STM32 SDIO: SDIO Fix system hang on card eject. From David Sidrane.
26406 - STM32 F7 Ethernet: Large Ethernet packet can leads network halt.
26408 - STM32F7 OTGHOST: OTGFS_EPTYPE_INTR should be OTG_EPTYPE_INTR. From
26410 - STM32 F7 SDMMC: SDMMC Fix system hang on card eject. From David
26412 - STM32 L4 Firewall: Correct a test to determine if an address lies
26415 - STM32 H7 Ethernet: Bazooka Joe's fix to the STM32 F7 Ethernet
26418 - STM32 H7 Ethernet: Fix ETH_MACMDIOAR_CR_MASK bit mask. From Markus
26420 - STM32 H7 SDMMC: SDMMC Fix system hang on card eject. From Gregory
26422 - STM32 H7 FLASH: Flash driver BUG fixes. From David Sidrane.
26423 - STM32 H7 TIM: Correct register bit definitions and alternate
26424 functions. Fix other copy-paste definitions. From Daniel Pereira
26426 - STM32 L4 SDMMC: SDMMC Fix system hang on card eject. From David
26431 - STM32F4-Discovery: Fix build error for posix_spawn. From Masayuki
26436 - TIVA IRQs: Fix wrong IRQ vector number. From Nathan Hartman.
26437 - Tiva FLASH: Fix several mistakes in tiva_write(). (1) Fix wrong
26438 use of && when & was intended. (2) Add compile- time warning
26443 preprocessor conditional. Was written to use the 32-word write
26444 buffer only for TM4C1294NCPDT. This buffer is available on all
26452 - Xtensa: Apply Masayuki Ishakawa's change for ARMv7-M to this SMP
26457 - Makefiles: Change ${shell pwd} to $(CURDIR) since pwd doesn't exist
26459 - tools/Makefile.unix: Fix build error when issue 'make -B': "mkdir:
26461 tools/Makefile.unix:269: recipe for target 'staging' failed". From
26463 - All ARM linker scripts: Preface all _ebss definitions with '. =
26466 - MIPS Linker Scripts: The PIC32M* start-up code initializes .bss by
26470 - Top-level Kconfig: Add some protection so that you cannot select an
26471 architecture-specific header file if the architecture does not
26473 - libc Kconfig: Should select the NuttX float.h file automatically
26475 - tools/Makefile.unix: Make COMMON_DIR work with
26477 - tools/ Make fragments: Fix the various minor issue for NUTTXLIBS /
26486 - getcwd(): Remove stray sched_unlock(). Also fixes several typos.
26488 - date(), hostname(): Fix portability issue with date, hostname From
26490 - libs/libxx/Kconfig: Automatically select CONFIG_CLOCK_MONOTONIC when
26491 CONFIG_LIBCXX is selected. Removed hardcoded -DCLOCK_MONOTONIC from
26495 - libs/libxx/Kconfig: CONFIG_LIBC_LOCALE is needed to build libcxx.
26499 - libs/libc/symtab: Move symbol table generation into libc since the
26500 address in symbol table should come from userspace binary for
26502 - libs/libc/ Kconfig files: Disable EXECFUNCS_HAVE_SYMTAB for kernel
26503 build. The symbol table doesn't have any meaning for kernel build
26507 - include/sys/time.h: According to earlier standards, usage of
26516 - tools/configure.sh and configure.c: Do not remove CONFIG_SIM_M32 if
26518 - tools/Directories.mk: Remove FSDIRS/NOFSDIRS related logic/comments
26519 since the file system can no longer be disabled now. From Xiang
26521 - tools/Makefile.host: Add missing binaries from clean target. From
26523 - tools/mkromfsimg.sh: Use sed to add const to ROMFS declarations so
26525 - tools/nxstyle.c: Correct detection of missing blank line following
26530 - Makefiles: Change ${shell pwd} to $(CURDIR) since pwd doesn't exist
26532 - Makefile: Fix warning: jobserver unavailable: using -j1. Add '+' to
26534 - apps/Application.mk: Correct an error in PATH usage. Use of
26539 - tools/mkromfsimg.sh: Use sed to add const to ROMFS declarations so
26544 - apps/examples/mount: Replace illegal call to ramdisk_register()
26546 - apps/examples/nxlines/: Correct nxlines example program name. From
26548 - apps/examples/nxterm/: PROGNAME, PRIORITY, STACKSIZE variable
26551 - apps/examples/romfs: Remove romfs_testdir.h. That file is
26557 - apps/testing/cxxtest/: Fix typo error in testing/cxxtest. From
26559 - apps/testing/unity/: Fix the error when creating Make.dep. From
26564 - apps/nshlib: Remove the inappropriate NSH_BUILTIN_APPS coupling.
26566 - apps/nshlib/: The NSH mkrd command was in violation of the NuttX
26573 the NSH mkrd command into to OS and provide user-space access via
26575 - apps/nshlib/: Replace direct calls to romdisk_register() with
26580 - apps/nshlib/: Add missing NSH_DISABLE_DMESG from Kconfig. From
26585 - apps/system/cle/: This change modifies the cle to use the streams
26590 - apps/system/composite: Remove usb serial loopback test code we can
26592 - apps/system/cu/: (1) Fix early exit. getc(stdin) can return 0 the
26595 priority of cu_listen(). (4) Add support for -h. From David
26597 - apps/system/lzf/: Check the protection by CONFIG_SYSTEM_LZF !=
26600 - apps/system/spi: Correctly parse exch txdata args, if any. Should
26605 - apps/fsutils/passwd/: Use named semaphore by checking
26611 - apps/netutils/cjson/Makefile: Fix the error when creating
26616 - apps/graphics/twm4nx/: Fix a recently introduced error that broke
26618 - apps/graphics/traveler/: Replace direct calls to romdisk_register()
26624 NuttX-9.0.0 Release Notes
26625 -------------------------
26631 - nxsem_wait_uninterruptible() now returns if the task is canceled.
26632 - Fix a bug in pthread_condwait() that was improperly re-initializing the mutex.
26633 …- In sched_setpriority(), fix functions called inside a DEBUGASSERT that were eliminated when asse…
26637 …- The configuration option CONFIG_CAN_PASS_STRUCT is now removed. Previously, it was used (at the…
26640 - Add a post-build function that allows extending the build with CPU/board-specific logic.
26641 - Add build tools to simplify ZDS-II tool usage.
26642 - mkexport.sh: Deal with ARCHSCRIPT containing multiple files.
26643 - Various nxstyle improvements.
26647 - Add support for RISCV-64
26648 - Add support for x86_64 (tested on QEMU)
26649 - Add support for ELF64
26650 - Add a port to the NUCLEO-F429ZI board
26651 - Add support for the STM32H747I-DISCO board
26652 - Add Z20X board support and bootloader to upload code from the W25 flash to SRAM
26653 - Add initial support for Litex with softcore CPU VexRiscV SoC
26654 - Add support for the Digilent ARTY_A7 board to test the Litex port
26655 - Added initial support for Sipeed Maix Bit board with Kendryte K210 processor
26656 - New architectural support: ez80f92
26657 - Flat address x86_64 port of NuttX
26658 - Support to run NuttX on ESP32 QEMU
26659 - Initial support for Sipeed Maix Bit board with Kendryte K210 processor
26660 - Add initial support for Kendryte K210 processor in SMP mode
26661 … - NXP S32K11x (Cortex-M0+) and S32K14x (Cortext-M4F): Add support for NXP automotive boards.
26662 - XMC 4700 (Cortex-M4F)
26664 - ESP32 loadable modules support
26665 - i.MX RT: FLEXIO clock config logic.
26666 - Fix the clock configuration for the i.MX RT family
26667 - i.MX RT: Add ability to run from OCRAM
26668 - SAMA5D27 peripheral support - USB Host working
26669 - z20x: Add W25 bootloader
26670 - i.MX RT: Add USB Device support
26671 - STM32, STM32F7, STM32H7 add SPI DMATHRESHOLD
26672 - Improve the simulator timer
26673 - 64-bit modules on macOS simulator
26674 - z20x: Add XTP2046 SPI support; add timer support
26675 - RX65N RTC Driver added
26676 - NXP Freedom K28F Board SD-Card support
26677 - STM32H7: support SDRAM via FMC peripheral
26678 - LM3S6965-ek: Add PROTECTED build support
26679 … - STM32H7: Added IWDG and WWDG, power management (sleep/stop/standby), WKUP pin configuration
26680 - SAMV71: Add read UID implementation and move flash functions to RAM
26681 - i.MX RT: Fix interrupts storm (serial & I2C)
26682 - Various fixes and cosmetic changes to the CxD56xx architecture
26683 … - Fix SiFive FE310 related code (comments, improve serial irq handling, initial int status)
26684 - Implement QSPI for STM32H7
26685 - Improvements for the nRF52 port: I2C, SPI, GPIO support
26686 - Updates for LPC17xx/40xx serial
26687 - Adds basic support for Microchip SAM E54 Xplained Pro board
26688 - Adds an Ethernet driver for the SAME5x family (based on the SAMA5 GMAC driver)
26689 - Add CDC ECM Ethernet over USB 2.0 High Speed (tested on SAMA5D36-Xplained board)
26690 - Simulator: Reimplement simulator uart on top of serial driver framework
26691 - NXP S32K1XX peripheral clock fixes
26692 - Fix syscall stack alignment on armv7-m
26693 - Fix flash_erase(page) when page >= 256 for STM32L4 family
26694 - Add partial support for the NETLINK poll() operation.
26695 - Add serial DMA support for STM32F7
26696 - Add AM335x Clock Configuration
26697 - Add I2C support for AM335x
26698 - Add configuration to fine tune LPI2C Timeout for iMXRT
26699 - Add CAN support to AM335x
26700 - Add I2C support to STM32F0/L0/G0
26701 - Kinetis LPC SDCard improvements
26702 - Replace the busy polling with work_queue in the ethernet driver of simulator
26703 - Fix Xtensa's SMP support to follow same logic from other SMP archs
26704 - PIC32MZ: SPI transfers can be configured to use DMA.
26705 - PIC32MZ: Implement cache operations.
26708 - New driver for the ADS7828 I2C analog to digital converter
26709 - driver/ioexpander: New driver for PCA9538 I2C I/O expander
26710 - New driver type for battery monitor ICs.
26711 - Driver for the BQ769x0 battery monitor IC.
26712 - Add Support for Quectel EC20 4G LTE Module USB CDC/ACM
26713 - Add QSPI-based Winbond NOR FLASH driver
26715 - Update all the drivers to check return value of nxsem_wait_uninterruptible().
26716 - MCP9844 shutdown mode support
26717 - fcntl: add O_CLOEXEC flag, add O_CLOEXEC/FD_CLOEXEC support
26718 - CDC-ECM Ethernet over USB 2.0 HS
26719 …- smartfs improvements: Handling of duplicate sectors, support fsck to check and repair the smartf…
26720 …- Various fixes for USBDEV driver: Remove unnecessary reset logic, fix descriptor type mismatch wh…
26721 … - Handle size zero in umm_malloc.c and umm_realloc.c, which causes a system freeze in kernel mode.
26722 - Fixed compilation issue with poll fds notification.
26723 - Report POLLHUP and POLLERR in 'revents' regardless the requested 'events' set.
26725 - Telnet: Fix/Refine CTRL+C to work on telnet
26726 - TCP: Fix of faulty TCP sequence increments
26727 - netdb: Fix netdb to query IPv4 and IPv6 addresses regardless the server address type
26728 - Netlink sockets may be set to non-blocking
26729 - Improve TUN and SLIP, refine Control+C Handling in Telnet
26730 - Sockets: Add socket MSG_DONTWAIT support
26731 - Network Loopback Driver: Add a configuration option to control packet size
26732 - Network IOCTLs: Add FIONBIO network IOCTL support
26733 - NFS: Support IPv4 and TCP
26734 - Sockets: Add IP and TCP socket options needed by iperf3
26735 - Netlink: Add support for asynchronous Netlink responses
26736 - TCP: Monitor TCP_POLL/TCP_NEWDATA/TCP_BACKLOG per the request like UDP counterpart
26737 - TCP: Minor design improvement to TCP delayed ACKs
26738 …- DNS IPv4/IPv6 Dual Host Support: When IPv4/IPv6 Dual Stack is enabled, queries both types of add…
26742 - Extend netutils and netinit to work with only Netlink sockets enabled
26743 - Add getprime program to check multi-thread performance
26744 - Improve zmodem send performance
26745 - Add simple HTS221, LSM303 and LSM6DSL examples
26746 - Improve to gs2200m wiki performance
26747 - Improve telnet server and enable it to listen on both IPv4 and IPv6
26748 - Improve ntpclient logic
26749 - Improve wapi to save configuration to file system
26750 - Improve wapi to skip associate if ssid is invalid
26751 - Improve cmd_nfsmount to use IPv4 and IPv6
26752 - Improve ostest for SMP and non-SMP configurations
26753 - Improve UDP to avoid using standard symbols
26754 - Improve dhcpd to include configurable timeout and retry count
26756 - Correct format when printing ARP tablet entries
26757 - Ensure /bin/ping and ping work at the same time
26758 - Correct backward conditional logic in dhcpd_leaseexpired()
26759 - Fix several problems on ftpd
26760 - Fix dhcpd issue reported on Issue #17
26761 - Fix sendmail example to run on a local SMTP server
26762 - Fix buffer overflow on netlib
26763 - Fix compile errors in loopback mode of the tcpblaster
26764 - Fix stack corruption in ELF task test
26765 - Fix errors in NoBlockRecv and BlockRecv tests of usrsocktest
26766 - Fix ipforward IP Header issue for IPv4
26767 - Fix wrongly swapped parity options of CU program
26768 - Fix slcd to avoid using priv->fd before initializing it
26769 - Fix (tcp, udp)blaster to build on macOS
26770 - Correct the buffer type of base64 program
26772 NuttX-9.1.0 Release Notes -------------------------
26776 - PR-977 PR-987 PR-998 PR-995 PR-997 PR-1007 Thread Local Storage (TLS)
26781 - PR-957 PR-947 PR-963 PR-969 Provide nx_ versions of many functions
26783 - PR-965 PR-980 PR-984 ioctl is now always in the variadic form.
26793 were issues with making ioctl calls on 64-bit arch since the
26797 https://github.com/apache/incubator-nuttx/issues/959
26799 - PR-962 PR-964 Add new interface sched_get_stackinfo that simplifies
26800 interfaces for things like TLS
26801 There are some security imposed rules for using this interface
26806 thread as a parent or grandparent or great-grandparent.
26808 - PR-1104 Internal function fs_fsopen() no longer affects errno -
26809 - PR-1123 Move task_init() and task_activate() to be internal functions -
26810 - PR-1140 Add nxtask_uninit() interface
26816 - PR-1134 Add typedef for max_align_t
26817 - PR-1141 Handle custom stack allocations
26818 sched_releasetcb() will normally free the stack allocated for a task.
26819 However, a task with a custom, user-managed stack may be created using
26825 in the the pre-allocated TCB to nxtask_init(). This flag is not used
26830 - Many private architecture interfaces were using 'up_' instead of the
26832 This fix is carried over many PRs such as PR-924. Many files also
26836 - PR-1018 PR-1017 PR-1021 PR-1022 PR-1057 PR-1060 PR-1194 Clean up
26837 internal APIs that were not using the properly naming conventions -
26838 - PR-857 Wrong value for it_interval field in timespec returned by
26839 timer_gettime - PR-902 SMP: On task creation do not clone
26846 - PR-911 Use OS signal functions internally to not reset errno that
26848 - PR-925 sys/stat.h Change the xtime fields to align with POSIX
26852 - PR-939 openamp: Update to 2020.04.0 - PR-953 lib_vsprintf: Fix issue
26854 This function requires traversing the VA_LIST twice. For some
26860 are particularly beneficial for boards.
26863 some modifications to keep your board's build scripts up-to-date with the
26864 rest of NuttX and avoid a broken or defective build. For details, see
26868 - PR-894 openamp and libmetal can now be downloaded and configured by
26869 build system - PR-941 Remove 'u' prefix from userspace library in FLAT
26870 Build so it is the same for all build types - PR-1044 ARM: Remove
26871 support for old redundant gcc toolchains
26873 This removes support for the Codesourcery, Atollic, DevKitArm,
26875 no longer used but they are all equivalent to the standard ARM EABI
26878 - PR-1148 PR-1149 Improve build time especially on non-Linux platforms
26886 - PR-1000 Fix broken support of ZDS-II Toolchain with MSYS
26890 - PR-879 ARMv8-M support - PR-1051 STM32G474 support
26892 - Initial architectural support for the STM32G474 family of
26894 support for the RCC and UART, allowing NuttX to boot to a functional
26897 peripherals are welcome. This adds support for these variants:
26902 - PR-745 The full line of STM32H7 chips are now defined
26903 This adds support for these variants:
26910 - PR-811 i486: Fix corruption of esp register on full context restore
26914 - PR-837 rx65n: Add crashdump support using standby RAM - PR-862
26915 STM32L4: Expose LPTIM timers - PR-868 STM32L4: Extend clock options and
26916 power regulation for based on clock settings
26921 available to use) Option to not enable the main PLL which allows for
26925 - PR-960 STM32: Add support for ADC features EXTSEL and JEXTSEL
26926 - PR-1041 STM32H7: Improve IDMA transfer and cache handling
26931 is no need to mix IDMA and interrupt based transfers; instead, when
26936 - PR-1042 STM32H7: Resolve multiple limitations and bugs with progmem
26937 especailly for partial memory writes
26938 - PR-1045 STM32H7: This gives possibility to send arbitrary number of
26939 bytes from memory to peripheral using DMA also when using write-back
26943 simplex-tx mode), it should not be necessary to align the data
26945 - PR-1103 STM32H7: Resolve clocking and pin configurations bugs that
26947 - PR-1104 STM32H7: Use UUID for Ethernet MAC. This is inline with the
26949 - PR-1110 STM32H7: Use FDCANSEL to determin FDCAN clock source if
26950 possible - PR-1165 STM32H7: SPI transaction appears to be completed
26953 SPI fifo. This is expected, but the exchange should actually wait for
26955 the dma completion event with the SPI TXC event for detecting end of
26958 - PR-1203 PR-1204 STM32H7: Enable support for BDMA and enable it for
26960 - PR-905 x86_64: Resolve linking issue when building with gcc 7 and 9.
26961 - PR-904 x86_64: Resolve compiler aliasing warnings and RNG
26962 pointer cast bug - PR-944 x86_64: Change entrypoint to standard
26964 - PR-971 x86_64: Fix bug in rng implementation using intrinsics
26965 - PR-973 x86_64: Fix crash on boot when XSAVE and SSE/AVX is enabled
26966 - PR-974 x86_64: Add support booting NuttX as a Jailhouse Cell
26967 - PR-919 sim: Add host mmap and perror to allow use of LIBC_MODLIB
26969 - PR-1198 sim: Use correct errno sign with hostfs interface
26970 - PR-932 z16: Updated toolchain to ZDS-II 5.2.2
26971 - PR-970 K210: Add PLL support
26972 - PR-988 K210: Resolve occasional lock in early boot caused by waiting
26974 - PR-1205 K210: Add basic GPIOHS support - PR-1112 tiva: Add up_idle
26975 support - PR-1116 NRF52832: Work around chip eratta for SPI Master 1
26976 Byte transfer anomaly - PR-1130 imxrt: Resolve WFI issue by setting
26978 - PR-1197 cxd56: Fix locking issue in Spresense audio driver causes by
26980 - PR-1221 Add INTx_C macro defintion
26984 - PR-1206 PR-1207 PR-1210 ioctl function should retun ENOTTY when the
26988 - PR-795 PR-1001 Initial NuttX audio driver supporting the Spresense
26990 - PR-975 Support for HDC1008 temperature and humidity sensor
26991 - PR-1201 Support for the CS4344 stereo audio DAC
26992 - PR-1145 Support for the FTDI FT232R USB to Serial converter
26993 - PR-1052 gs2200m: Add max payload size to prevent crashing when
26995 - PR-1090 gs2200m: Fix possible packet queue count overflow seen during
26996 streaming - PR-1127 gs2200m: Resolve possible buffer overrun in packet
26997 parsing - PR-1167 pty: Return correct number of bytes when
27001 - PR-887 PR-888 rptun: Add control for independent control of rx and tx
27003 - PR-917 gs2200m: Receive performance improvement for TCP/UDP
27004 - PR-1032 gs2200m: Add SPI-DMA support to spresense
27005 - PR-1046 gs2200m: Add getsockname() support
27006 - PR-1094 PR-1163 gs2200m: Add flow control support to prevent memory
27008 - PR-1101 gs2200m: Add WPA2-PSK AP mode support, this is now the default
27010 - PR-1115 SPI slave: Improve interface
27015 - PR-1196 Audio: Add support for using ap_buffer_info without
27018 - PR-1222 audio/cxd56: Add audio buffering feature.
27023 - PR-1200 The boards_button_initialize and boards_userled_initialize
27035 - PR-1051 ST Micro B-G474E-DPOW1 Discovery Kit
27036 Initial support for the ST Micro B-G474E-DPOW1 Discovery Kit with
27037 STM32G474RE MCU. Currently there is basic support for booting NuttX to
27041 Virtual COM Port over the same Micro-USB Type B connection used for
27043 - PR-1211 STM32F411-Minimum board (a.k.a. BlackPill)
27044 Initial support for the BlackPill board which is a low cost STM32F411
27048 - PR-949 qemu-intel64: Add nsh configuration for testing QEMU
27050 - PR-966 qemu-i486: Fix issue where console would not accept input
27052 - PR-993 stm32h747i-disco: Add support for FMC SDRAM - PR-1029 maix-bit:
27053 Add knsh configuration for testing Kernel mode under QEMU virtualization
27054 - PR-1056 stm32h747i-disco: Add support for FAT and SD Card via SDMMC
27055 - PR-1070 PR-1086 spresense: Add ftpd/ftpc and nxplayer to wifi and rndis
27057 - PR-1084 imxrt1060-evk: Add dns client and renew command to netnsh
27059 - PR-1113 lm3s6965ek: Use proper sysclock for QEMU
27061 - PR-1229 Add support for the inboard joystick
27062 - PR-1232 Architectural re-organization to the initialization of the
27067 - PR-918 tmpfs: Calling statfs could cause files to be removed
27068 recursively - PR-1142 NFS: Use of uint64_t causes issues with gaps in
27070 - PR-1143 Report correct stats for proxied block and MTD drivers
27073 - PR-793 Allow use of genromfs to geneate ROMFS
27074 - PR-851 Upgrade littlefs to v2.2.1
27075 - PR-1154 FATFS: Do not rewrite the root directory if it has not been
27077 - PR-1120 PR-1118 Fill in file size for mtd and block inode
27080 - PR-807 Netlink: Broadcast link status changes to userspace via
27082 - PR-892 Netdb: Multiple DNS Servers
27083 Adds capability to add multiple nameservers on run-time even when not
27085 setting (no nameserver at all or single predefined nameserver in Kconfig).
27086 This is useful for applications that change their cellular network
27088 - PR-1015 tcp/conn: Request ARP before 3-way handshake
27092 - PR-185 PR-828 nshlib
27097 - PR-236 littlevgl: Add additional config mappings to the library
27098 - PR-264 nxplayer: Add max host and filename for http url
27099 - PR-260 nshlib: Add wget buffer size control with
27101 - PR-243 dhcpd: Add ability for daemon to be cancelled
27102 - PR-238 Remove use the set_errno this is now properly handled by the
27104 - PR-233 hdc1008: Add example application for this driver
27107 - PR-282 netlib: Fix pathlen computation for netlib_parseurl and
27109 - PR-281 webclient: Check return value of netlib_parseurl correctly
27110 - PR-278 webclient: Handle http/https redirection correctly
27111 - PR-277 webclient: Limit the number of http redirects
27112 - PR-198 webclient: Use getaddrinfo() to get IPv4 address on
27114 - PR-268 ftpd: Fix EPSV mode for IPv4
27115 - PR-258 nsh: Always try FILE_APPS even if the command is builtin,
27117 - PR-257 gs2200m: Handle packets over 1500 Bytes, previously would
27119 - PR-221 gs2200m: Server sockets were not properly being released by
27121 - PR-248 dhcpd: Correct option header check length
27122 - PR-176 cu: Handle NULL character correctly
27123 - PR-287 PR-290 examples: Update nxflat and thttpd Makefile's to fix
27126 * Compatibility Concerns -- Changes to Build System:
27128 If you are building NuttX for a custom board, you may need to make
27129 some of the following changes in build-related files for your board:
27136 For example, these lines:
27139 …HWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
27141 …NINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
27149 …RCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS) -pipe
27151 …ARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS) -pipe
27162 To see why, tools/Config.mk assigns a value to KDEFINE such that the
27175 This item pertains only to custom boards that are developed in- tree,
27176 meaning under the NuttX boards/ subdirectory. Out-of-tree boards are
27179 If your custom board directory is in-tree and in a board family that
27196 DEPPATH += --dep-path board
27204 If you forget to do this, 'make' will report an error, "no rule to make
27212 For example, change this line:
27231 For example, change this line:
27243 This option, which resolves to -w when CONFIG_CYGWIN_WINTOOL is
27244 configured, is now appended to INCDIR in tools/Config.mk.
27251 In your custom board's scripts/Make.defs file, It is no longer
27255 - DIRLINK
27256 - DIRUNLINK
27257 - MKDEP
27258 - ASMEXT
27259 - OBJEXT
27260 - LIBEXT
27261 - EXEEXT
27263 These variables have been refactored into tools/Config.mk.
27273 change ${TOPDIR} to $(TOPDIR) for consistency (change curly braces to
27279 * Remove Workaround For Missing $(TOPDIR)/Make.defs
27281 In src/Make.defs or src/Makefile for your custom board or custom apps,
27282 the workaround for missing $(TOPDIR)/.config and/or
27283 $(TOPDIR)/Make.defs is no longer needed. To remove the workaround,
27284 delete the minus sign in front of include .config. This is now handled
27291 -include $(TOPDIR)/Make.defs
27313 # Windows-native toolchains
27314 ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}"
27315 …ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}" -isystem "${shell cyg…
27317 # Linux/Cygwin-native toolchain
27318 ARCHINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include
27319 …ARCHXXINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include -isystem $(TOPDIR)$(DELIM)include$(DELIM)cxx
27326 ARCHINCLUDES += ${shell $(INCDIR) -s "$(CC)" $(TOPDIR)$(DELIM)include}
27327 ARCHXXINCLUDES += ${shell $(INCDIR) -s "$(CC)" $(TOPDIR)$(DELIM)include}
27328 ARCHXXINCLUDES += ${shell $(INCDIR) -s "$(CC)" $(TOPDIR)$(DELIM)include$(DELIM)cxx}
27329 …/Config.mk and resolves to a shell script or batch file that constructs the appropriate command li…
27353 For example, change this:
27356 …ARCHSCRIPT = -T$(TOPDIR)$(DELIM)boards$(DELIM)$(CONFIG_ARCH)$(DELIM)$(CONFIG_ARCH_CHIP)$(DELIM)$(C…
27362 ARCHSCRIPT = -T$(BOARD_DIR)$(DELIM)scripts$(DELIM)$(LDSCRIPT)
27365 You may find the old syntax being used for variables like ARCHSCRIPT,
27368 BOARD_DIR is defined in tools/Config.mk.
27374 NuttX-10.0.0 Release Notes
27375 ------------------------
27385 #1565](https://github.com/apache/incubator-nuttx/pull/1565)). This eliminates
27387 `wd_create()` and `wd_delete()` * wdog timer data structures are no longer
27388 pre-allocated. Now they are allocated by the caller of `wd_start()`. This (1)
27406 `wd_delete()` altogether. Calling `wd_cancel()` with an un-initialized s`truct
27408 of all remaining wdog function calls from. For example, replace a call like `ret
27409 = wd_cancel(priv->wdog)` where `priv->wdog` was type `WDOG_ID` with the call
27410 `ret = wd_cancel(&priv->wdog)`where `priv->wdog` is now type `struct wdog_s`.
27412 * [PR-1877](https://github.com/apache/incubator-nuttx/pull/1877) libc:
27413 Implement "j" modifier for scanf
27415 * [PR-1864](https://github.com/apache/incubator-nuttx/pull/1864) libc: fs: Add
27418 * [PR-1863](https://github.com/apache/incubator-nuttx/pull/1863) libc:
27421 * [PR-1866](https://github.com/apache/incubator-nuttx/pull/1866) libc: uio:
27422 enable `writev()` for sockets
27424 * [PR-1853](https://github.com/apache/incubator-nuttx/pull/1853) libc:
27427 * [PR-1850](https://github.com/apache/incubator-nuttx/pull/1850) Add tool for
27428 parsing the callstack for Trace32
27430 * [PR-1840](https://github.com/apache/incubator-nuttx/pull/1840) Add POLLPRI
27431 for exception condition on the file descriptor
27433 * [PR-1828](https://github.com/apache/incubator-nuttx/pull/1828) Implement
27436 * [PR-1826](https://github.com/apache/incubator-nuttx/pull/1826) libc: Add
27439 * [PR-1824](https://github.com/apache/incubator-nuttx/pull/1824) Implement
27442 * [PR-1821](https://github.com/apache/incubator-nuttx/pull/1821) Implement
27445 * [PR-1818](https://github.com/apache/incubator-nuttx/pull/1818) Implement
27448 * [PR-1779](https://github.com/apache/incubator-nuttx/pull/1779) libc: Minimal
27451 * [PR-1758](https://github.com/apache/incubator-nuttx/pull/1758) mm: Add lock
27454 * [PR-1756](https://github.com/apache/incubator-nuttx/pull/1756) libc:
27457 * [PR-1658](https://github.com/apache/incubator-nuttx/pull/1658) libc: Add
27458 stubs for utimes
27460 * [PR-1615](https://github.com/apache/incubator-nuttx/pull/1615) libc:
27463 * [PR-1611](https://github.com/apache/incubator-nuttx/pull/1611) libc: Allocate
27466 * [PR-1684](https://github.com/apache/incubator-nuttx/pull/1684) Add gdb script
27467 for NuttX thread debugging
27469 * [PR-1607](https://github.com/apache/incubator-nuttx/pull/1607) mm: Implement
27472 * [PR-1606](https://github.com/apache/incubator-nuttx/pull/1606) sched/pthread:
27475 * [PR-1600](https://github.com/apache/incubator-nuttx/pull/1600) Implement
27478 * [PR-1597](https://github.com/apache/incubator-nuttx/pull/1597) sched: Support
27481 * [PR-1596](https://github.com/apache/incubator-nuttx/pull/1596) libc: Replace
27485 * [PR-1517](https://github.com/apache/incubator-nuttx/pull/1517) sched/wdog:
27487 where in the code base. Also bump CONFIG\_MAX\_WDOGPARAMS from 1 to 2 in
27490 * [PR-1486](https://github.com/apache/incubator-nuttx/pull/1486) libc:
27493 * [PR-1567](https://github.com/apache/incubator-nuttx/pull/1567) libc:
27496 * [PR-1411](https://github.com/apache/incubator-nuttx/pull/1411) libxx:
27499 * [PR-1586](https://github.com/apache/incubator-nuttx/pull/1586) libc: Add open
27500 for text (translated) access support
27502 * [PR-1584](https://github.com/apache/incubator-nuttx/pull/1584) libc:
27505 * [PR-1580](https://github.com/apache/incubator-nuttx/pull/1580) libc:
27508 * [PR-1545](https://github.com/apache/incubator-nuttx/pull/1545) sched/wdog: Do
27512 * [PR-1534](https://github.com/apache/incubator-nuttx/pull/1534) sched/wdog:
27515 * [PR-1420](https://github.com/apache/incubator-nuttx/pull/1420) libc: Do not
27516 define localtime\[\_r\] to macro with CONFIG\_LIBC\_LOCALTIME is not defined.
27518 * [PR-1375](https://github.com/apache/incubator-nuttx/pull/1375) libc: Always
27522 * [PR-1371](https://github.com/apache/incubator-nuttx/pull/1371) libc: Improve
27526 * [PR-1369](https://github.com/apache/incubator-nuttx/pull/1369) Initialize the
27530 * [PR-1292](https://github.com/apache/incubator-nuttx/pull/1292) pthread/mutex:
27533 * [PR-1280](https://github.com/apache/incubator-nuttx/pull/1280) libc:
27536 * [PR-1279](https://github.com/apache/incubator-nuttx/pull/1279) libc:
27539 * [PR-1278](https://github.com/apache/incubator-nuttx/pull/1278) libc:
27542 * [PR-1269](https://github.com/apache/incubator-nuttx/pull/1269) cstdlib: Add
27545 * [PR-1264](https://github.com/apache/incubator-nuttx/pull/1264) sched/pthread:
27548 * [PR-1440](https://github.com/apache/incubator-nuttx/pull/1440) libc: Add the
27551 * [PR-1308](https://github.com/apache/incubator-nuttx/pull/1308) libc: Add
27552 support for \_SC\_NPROCESSORS\_CONF/\_SC\_NPROCESSORS\_ONLN to sysconf
27554 * [PR-1305](https://github.com/apache/incubator-nuttx/pull/1305) libc:
27555 Implement WNOHANG for waitpid and waitid
27557 * [PR-1237](https://github.com/apache/incubator-nuttx/pull/1237) libc: Add
27558 minimal support for locale\_t operation: suplocale, freelocale, newlocale,
27561 * [PR-1317](https://github.com/apache/incubator-nuttx/pull/1317) sched/task:
27564 * [PR-1187](https://github.com/apache/incubator-nuttx/pull/1187) sched: Unify
27567 * [PR-2263](https://github.com/apache/incubator-nuttx/pull/2263) libc/stdio:
27570 * [PR-2053](https://github.com/apache/incubator-nuttx/pull/2053) *
27571 [PR-2040](https://github.com/apache/incubator-nuttx/pull/2040) serial/termios:
27576 * [PR-1911](https://github.com/apache/incubator-nuttx/pull/1911) init\_section
27579 * [PR-1889](https://github.com/apache/incubator-nuttx/pull/1889) Fix build
27580 error for ::setbuf if CONFIG\_STDIO\_DISABLE\_BUFFERING is set
27582 * [PR-1619](https://github.com/apache/incubator-nuttx/pull/1619) Fix inverted
27585 * [PR-1595](https://github.com/apache/incubator-nuttx/pull/1595) epoll\_wait()
27588 * [PR-1519](https://github.com/apache/incubator-nuttx/pull/1519) libc: Replace
27592 * [PR-1514](https://github.com/apache/incubator-nuttx/pull/1514) Remove usage
27593 for user-space memalign() from kernel/driver code. Instead use the proper
27596 * [PR-1512](https://github.com/apache/incubator-nuttx/pull/1512) / *
27597 [PR-1510](https://github.com/apache/incubator-nuttx/pull/1510) / *
27598 [PR-1507](https://github.com/apache/incubator-nuttx/pull/1507) Remove usage for
27599 user-space malloc()/zalloc()/free() from kernel/driver code. Instead use the
27602 * [PR-1496](https://github.com/apache/incubator-nuttx/pull/1496) libc: Change
27605 * [PR-1463](https://github.com/apache/incubator-nuttx/pull/146) libc: Replace
27608 * [PR-1365](https://github.com/apache/incubator-nuttx/pull/1365) up\_assert
27611 * [PR-1336](https://github.com/apache/incubator-nuttx/pull/1336) syscall: Fix
27614 * [PR-1289](https://github.com/apache/incubator-nuttx/pull/1289) Clear the
27617 * [PR-1254](https://github.com/apache/incubator-nuttx/pull/1254) libc: mkstemp
27620 * [PR-1311](https://github.com/apache/incubator-nuttx/pull/1311) libc: Move
27623 * [PR-1328](https://github.com/apache/incubator-nuttx/pull/1328) Make sure that
27626 * [PR-1318](https://github.com/apache/incubator-nuttx/pull/1318)
27629 * [PR-2951](https://github.com/apache/incubator-nuttx/pull/2951) sched: Fix
27630 deadlock in nxtask\_exit() for SMP
27632 * [PR-2229](https://github.com/apache/incubator-nuttx/pulls/2229) *
27633 [PR-2298](https://github.com/apache/incubator-nuttx/pulls/2298) *
27634 [PR-2279](https://github.com/apache/incubator-nuttx/pulls/2279) *
27635 [PR-2272](https://github.com/apache/incubator-nuttx/pulls/2272) *
27636 [PR-2264](https://github.com/apache/incubator-nuttx/pulls/2264) *
27637 [PR-1992](https://github.com/apache/incubator-nuttx/pulls/1992) *
27638 [PR-2022](https://github.com/apache/incubator-nuttx/pulls/2022) sched: SMP
27639 fixups that caused locking and removal of some no longer required workarounds
27641 * [PR-1993](https://github.com/apache/incubator-nuttx/pull/1993) libc: Skip
27644 * [PR-1997](https://github.com/apache/incubator-nuttx/pull/1997) libc: Remove
27651 * [PR-1763](https://github.com/apache/incubator-nuttx/pulls/1763) Add
27654 * [PR-1677](https://github.com/apache/incubator-nuttx/pull/1677) Add simulator,
27655 drivers, and contributing instructions for new users
27657 * [PR-1675](https://github.com/apache/incubator-nuttx/pull/1675) Add quickstart
27660 * [PR-1673](https://github.com/apache/incubator-nuttx/pull/1673) Update all the
27664 * [PR-1501](https://github.com/apache/incubator-nuttx/pull/1501) Port all the
27668 * [PR-1433](https://github.com/apache/incubator-nuttx/pull/1433) Convert README
27675 * [PR-1786](https://github.com/apache/incubator-nuttx/pull/1786) Support
27678 * [PR-1396](https://github.com/apache/incubator-nuttx/pull/1396) Make C/C++
27681 * [PR-1682](https://github.com/apache/incubator-nuttx/pull/1682) configure.sh
27682 can now list configurations with "-L" option
27684 * [PR-2023](https://github.com/apache/incubator-nuttx/pull/2023) tools: Remove
27689 * [PR-1713](https://github.com/apache/incubator-nuttx/pull/1713) Fix export
27692 * [PR-1470](https://github.com/apache/incubator-nuttx/pull/1470) Fix Make.dep
27693 not updated by .config changes
27695 * [PR-1345](https://github.com/apache/incubator-nuttx/pull/1786) Enhance export
27699 * [PR-1332](https://github.com/apache/incubator-nuttx/pull/1332) Include
27702 * [PR-1995](https://github.com/apache/incubator-nuttx/pull/1995) Fix issue
27703 where wrong extension was generated for mkconfig in WSL builds
27705 * [PR-1949](https://github.com/apache/incubator-nuttx/pull/1949) Fix issue in
27706 make export where nuttx-names.dat was not being generated
27708 * [PR-1682](https://github.com/apache/incubator-nuttx/pull/1682): Fix issue
27715 * [PR-1847](https://github.com/apache/incubator-nuttx/pull/1847) ARM: Initial
27716 support for ARMV6M to support CortexM0+
27718 * [PR-1397](https://github.com/apache/incubator-nuttx/pull/1379): EOSS3:
27719 Initial support for the QuickLogic EOS S3 SoC
27725 * [PR-1753](https://github.com/apache/incubator-nuttx/pull/1753) cxd56xx: Use
27728 * [PR-1650](https://github.com/apache/incubator-nuttx/pull/1650) cxd56xx: Use
27731 * [PR-1621](https://github.com/apache/incubator-nuttx/pull/1621) cxd56xx: Use
27734 * [PR-1569](https://github.com/apache/incubator-nuttx/pull/1569) cxd56xx: Add
27737 * [PR-1689](https://github.com/apache/incubator-nuttx/pull/1689) cxd56xx: Use
27742 * [PR-1422](https://github.com/apache/incubator-nuttx/pull/1422) ESP32: Add SPI
27745 * [PR-1435](https://github.com/apache/incubator-nuttx/pull/1435) ESP32: Add I2C
27748 * [PR-1491](https://github.com/apache/incubator-nuttx/pull/1491) ESP32: Add SPI
27751 * [PR-1525](https://github.com/apache/incubator-nuttx/pull/1525) ESP32: Add
27754 * [PR-1610](https://github.com/apache/incubator-nuttx/pull/1610) ESP32: Improve
27757 * [PR-1630](https://github.com/apache/incubator-nuttx/pull/1630) ESP32: Add
27758 support for HW RNG
27760 * [PR-1830](https://github.com/apache/incubator-nuttx/pull/1830) ESP32: Add
27761 Power Management of Force-Sleep
27763 * [PR-1754](https://github.com/apache/incubator-nuttx/pull/1754) ESP32: Add
27764 support for external SPIFLASH
27766 * [PR-1613](https://github.com/apache/incubator-nuttx/pull/1613) ESP32: Add
27767 function for switching CPU from 80MHz to 240MHz
27769 PR-1712 ESP32: Add support for external MMCSD card over SPI
27773 * [PR-1868](https://github.com/apache/incubator-nuttx/pull/1868) IMXRT: Add ADC
27778 * [PR-1624](https://github.com/apache/incubator-nuttx/pull/1624) Kinetis:
27779 USBHOST improvements to avoid race condition durring freeing for queue head
27782 PR-1516 Kinetis K28: Add support for USB High Speed Host
27784 PR-1531 Kinetis K28: Add USB state change notifiers in notifier work queue
27786 PR-1456 Kinetis K28: Reworked USB driver for setup out data phase
27792 * [PR-1418](https://github.com/apache/incubator-nuttx/pull/1418) NRF52: Add
27795 * [PR-1432](https://github.com/apache/incubator-nuttx/pull/1422) NRF52: Add
27798 * [PR-1635](https://github.com/apache/incubator-nuttx/pull/1635) NRF52: Add
27799 support for RTC event handling
27801 * [PR-1636](https://github.com/apache/incubator-nuttx/pull/1636) NRF52: Add
27802 support for PPI peripheral
27804 * [PR-1681](https://github.com/apache/incubator-nuttx/pull/1681) NRF52: Add
27805 support for GPIOTE task mode
27807 * [PR-1726](https://github.com/apache/incubator-nuttx/pull/1726) NRF52: Extend
27810 * [PR-1773](https://github.com/apache/incubator-nuttx/pull/1773) NRF52: Add ADC
27813 * [PR-1915](https://github.com/apache/incubator-nuttx/pull/1915) NRF52: Add
27814 serial termios support (no flow control)
27816 * [PR-1907](https://github.com/apache/incubator-nuttx/pull/1907) NRF52: Add
27817 basic error handing for i2c in polling mode to support i2ctool. Still not
27820 * [PR-1839](https://github.com/apache/incubator-nuttx/pull/1839) NRF52: Add
27823 * [PR-1646](https://github.com/apache/incubator-nuttx/pull/1646) NRF52: Better
27826 PR-1685 NRF52: Add ARM system reset support. Add UID support.
27828 PR-1674 NRF52: Add LFCLK/HFCLK support for selecting oscillator sources.
27832 * [PR-1858](https://github.com/apache/incubator-nuttx/pull/1858) RISCV: Add
27833 missing CSR macros listed in RISC-V spec V1.10.
27835 PR-1314 rv32im: Add schedulesigaction.c, SYS\_save\_context handling, skip ECALL
27840 * [PR-1622](https://github.com/apache/incubator-nuttx/pull/1622) RX65N: Add
27843 * [PR-1894](https://github.com/apache/incubator-nuttx/pull/1894) RX65N: Add USB
27846 * [PR-1899](https://github.com/apache/incubator-nuttx/pull/1899) RX65N: Add DTC
27849 PR-1910 RX65N: Add SPI driver support
27853 * [PR-1515](https://github.com/apache/incubator-nuttx/pull/1515) SAMD5E5: Add
27856 * [PR-1574](https://github.com/apache/incubator-nuttx/pull/1574) SAMD5E5: Add
27859 * [PR-1594](https://github.com/apache/incubator-nuttx/pull/1594) SAMD5E5:
27862 * [PR-1816](https://github.com/apache/incubator-nuttx/pull/1816) SAMD5E5: Add
27867 PR-1412 SAMA5D27: Implement system reset to support nsh reboot command
27869 PR-1393 SAMA5D2x: Implement SDMMC peripheral support
27873 PR-1339 S32K: Extend FlexTimer support and add support for PWM
27875 PR-1337 S32K: Allow FlexCAN to use to NETDEV\_LATEINIT to handle the case where
27879 * [PR-1914](https://github.com/apache/incubator-nuttx/pull/1914) SIM: SIGUSR1
27882 * [PR-1859](https://github.com/apache/incubator-nuttx/pull/1859) ESIM: Add
27885 * [PR-1767](https://github.com/apache/incubator-nuttx/pull/1767) SIM: Allow
27886 access to tty interfaces for better termios support
27888 * [PR-1655](https://github.com/apache/incubator-nuttx/pull/1655) SIM: Add
27889 support for Linux HCI Socket as a NuttX BLE adapter. Full NuttX BLE stack can
27892 * [PR-1558](https://github.com/apache/incubator-nuttx/pull/1558) SIM: Add
27893 support for Stack Smashing Protector.
27895 * [PR-1392](https://github.com/apache/incubator-nuttx/pull/1392) SIM: Make
27898 * [PR-1460](https://github.com/apache/incubator-nuttx/pull/1460) SIM: Call
27903 * [PR-1865](https://github.com/apache/incubator-nuttx/pull/1865) STM32F4: Add
27904 support for STM32F412CE fixing I2C2/I2C3 and USART1 alt
27906 * [PR-1506](https://github.com/apache/incubator-nuttx/pull/1506) STM32: Add
27907 support for single wire UART push/pull mode
27909 * [PR-1572](https://github.com/apache/incubator-nuttx/pull/1572) STM32F2/F4:
27910 Add options for I-Cache and D-Cache to be enabled/disable. Previously they were
27913 * [PR-1287](https://github.com/apache/incubator-nuttx/pull/1286) STM32F7:
27915 STM32F46G-DISCO board
27917 * [PR-1275](https://github.com/apache/incubator-nuttx/pull/1275) STM32: Allow
27920 * [PR-1268](https://github.com/apache/incubator-nuttx/pull/1268) STM32: Add
27921 support for STM32F412 with UART / SPI / CAN / I2C / DMA
27923 * [PR-1250](https://github.com/apache/incubator-nuttx/pull/1250) STM32L4: Add
27924 support for booting into DFU mode
27930 * [PR-1562](https://github.com/apache/incubator-nuttx/pull/1562) ARM: Save
27931 tcb-adj\_stack\_size should be saved without tls overhead
27933 * [PR-1900](https://github.com/apache/incubator-nuttx/pull/1900) ARM: Fix false
27934 reporting for stack usage for unaligned stacks
27938 * [PR-1410](https://github.com/apache/incubator-nuttx/pull/1410) avr: Implement
27939 missing double\_t type, CONFIG\_STACK\_ALIGNMENT, linker emulation flags
27943 * [PR-1930](https://github.com/apache/incubator-nuttx/pull/1930) cxd56xx: Fix
27946 * [PR-1789](https://github.com/apache/incubator-nuttx/pull/1789) cxd56xx: Fix
27949 * [PR-1620](https://github.com/apache/incubator-nuttx/pull/1620) cxd56xx: Fix
27952 * [PR-1253](https://github.com/apache/incubator-nuttx/pull/1253) cxd56xx: Fix
27956 * [PR-1950](https://github.com/apache/incubator-nuttx/pull/1950) cxd56xx: Fix
27961 * [PR-1908](https://github.com/apache/incubator-nuttx/pull/1908) ESP32: Fix
27964 * [PR-1941](https://github.com/apache/incubator-nuttx/pull/1941) ESP32: Fix
27969 * [PR-1527](https://github.com/apache/incubator-nuttx/pull/1527) IMXRT: Fix
27972 * [PR-1455](https://github.com/apache/incubator-nuttx/pull/1455) IMXRT: Fix
27973 auto-negotiation for KSZ8081 PHY
27977 * [PR-1273](https://github.com/apache/incubator-nuttx/pull/1273) Kinetis: Fix
27984 * [PR-1928](https://github.com/apache/incubator-nuttx/pull/1928) NRF52: Fix PPI
27987 * [PR-1885](https://github.com/apache/incubator-nuttx/pull/1885) NRF52: Fix SPI
27990 * [PR-1799](https://github.com/apache/incubator-nuttx/pull/1799) NRF52: Fix
27993 * [PR-1787](https://github.com/apache/incubator-nuttx/pull/1787) NRF52: Fix
27994 base address for SPIM{1,2,3}
27996 * [PR-1777](https://github.com/apache/incubator-nuttx/pull/1777) NRF52: Handle
28000 * [PR-1770](https://github.com/apache/incubator-nuttx/pull/1770) NRF52: Fix bug
28001 where SPI cmddata was not properly mapped for SPIM 0,2,3
28003 #### RISC-V
28005 * [PR-1909](https://github.com/apache/incubator-nuttx/pull/1909) RISC-V: MIE
28006 instead of MPIE register was being used in up\_schedule\_sigaction for storing
28011 * [PR-1903](https://github.com/apache/incubator-nuttx/pull/1903) SIM: Fix
28012 complication issue for WPCAP in Cygwin build
28014 * [PR-1888](https://github.com/apache/incubator-nuttx/pull/1888) SIM: Fix
28015 EOVERFLOW returned when CONFIG\_SIM\_M32 is set
28017 * [PR-1709](https://github.com/apache/incubator-nuttx/pull/1709) SIM: Fix
28018 up\_cpu\_start initialization for macOS with SMP enabled
28022 * [PR-1898](https://github.com/apache/incubator-nuttx/pull/1898) STM32F7: Fixes
28025 * [PR-1841](https://github.com/apache/incubator-nuttx/pull/1841) STM32: Remove
28028 * [PR-1719](https://github.com/apache/incubator-nuttx/pull/1719) STM32:
28031 * [PR-1714](https://github.com/apache/incubator-nuttx/pull/1714) STM32H7: Fix
28034 * [PR-1556](https://github.com/apache/incubator-nuttx/pull/1556) STM32: Fix IO
28037 * [PR-1529](https://github.com/apache/incubator-nuttx/pull/1529) STM32: Fix
28040 * [PR-1561](https://github.com/apache/incubator-nuttx/pull/1561) STM32: Make
28041 sure that core over-drive is enabled for all chips that support it and operating
28043 over-drive not configured.
28045 * [PR-1553](https://github.com/apache/incubator-nuttx/pull/1553) STM32F7: Fix
28048 * [PR-1544](https://github.com/apache/incubator-nuttx/pull/1544) STM32: Make
28052 * [PR-1380](https://github.com/apache/incubator-nuttx/pull/1380) STM32F7: Fix
28056 * [PR-1252](https://github.com/apache/incubator-nuttx/pull/1252) STM32L4: Fix
28059 * [PR-1310](https://github.com/apache/incubator-nuttx/pull/1310) STM32L4:
28062 * [PR-1248](https://github.com/apache/incubator-nuttx/pull/1248) STM32L4: Fix
28066 * [PR-1247](https://github.com/apache/incubator-nuttx/pull/1247) STM32L47x/8x:
28069 * [PR-1246](https://github.com/apache/incubator-nuttx/pull/1246) STM32L4: Fix
28070 issue where clock divider for serial baud rate was not set correctly
28074 * [PR-1912](https://github.com/apache/incubator-nuttx/pull/1912) Fix
28075 up\_interrupt\_contex() in case of SMP - Make sure the operation is atomic in
28082 * [PR-1896](https://github.com/apache/incubator-nuttx/pull/1896) spi\_xx25xx
28085 * [PR-1891](https://github.com/apache/incubator-nuttx/pull/1891) serial: Don't
28088 * [PR-1856](https://github.com/apache/incubator-nuttx/pull/1856) pipe: In case
28089 of empty pipe with no writers, return EOF instead of EAGAIN
28091 * [PR-1836](https://github.com/apache/incubator-nuttx/pull/1836) stmpe811: Fix
28094 * [PR-1741](https://github.com/apache/incubator-nuttx/pull/1741) mmcsd\_sdio:
28097 * [PR-1370](https://github.com/apache/incubator-nuttx/pull/1370) can: Fix
28098 incorrect usage of nxsem\_getvalue which caused fifo->rx\_sem to increase with
28101 * [PR-1452](https://github.com/apache/incubator-nuttx/pull/1452) lcd: Fix
28108 * [PR-1797](https://github.com/apache/incubator-nuttx/pull/1797) leds: WS2812
28111 * [PR-1851](https://github.com/apache/incubator-nuttx/pull/1851) kbd: Add
28112 support for SolderParty BlackBerry Q10 Keyboard
28114 * [PR-1618](https://github.com/apache/incubator-nuttx/pull/1618) BQ27426 fuel
28117 * [PR-1276](https://github.com/apache/incubator-nuttx/pull/1276) Add support
28118 for the ST7735 TFT Controller
28120 * [PR-1233](https://github.com/apache/incubator-nuttx/pull/1233) usbhost: Add
28121 support for CDC-MBIM USB host driver
28125 * [PR-1816](https://github.com/apache/incubator-nuttx/pull/1816) stmpe811: Add
28126 SPI support for touch screen controller
28128 * [PR-1800](https://github.com/apache/incubator-nuttx/pull/1800) vfs: Add
28131 * [PR-1798](https://github.com/apache/incubator-nuttx/pull/1798) mmcsd: Allow
28134 * [PR-1587](https://github.com/apache/incubator-nuttx/pull/1587) BCH: Delay the
28137 * [PR-1577](https://github.com/apache/incubator-nuttx/pull/1577) rwbuffer:
28138 Avoid allocating memory for the temporary erase buffer by the FTL driver
28140 * [PR-1466](https://github.com/apache/incubator-nuttx/pull/1466) Altair Modem:
28142 Fix priority of SPI transfer task is too low, Modify timeout value for RX ready
28144 * [PR-1471](https://github.com/apache/incubator-nuttx/pull/1471) ramlog: Add
28147 * [PR-1547](https://github.com/apache/incubator-nuttx/pull/1547) usbhub: Make
28150 * [PR-1374](https://github.com/apache/incubator-nuttx/pull/1374) gpio: Extend
28151 gpio\_pintype\_e for pulldown/up and opendrain
28153 * [PR-1249](https://github.com/apache/incubator-nuttx/pull/1249) bmp280: Add
28154 support for reading temperature
28156 * [PR-1299](https://github.com/apache/incubator-nuttx/pull/1299) mpu60x0: Add
28157 I2C support for the MPU60x0 sensor driver
28159 * [PR-1325](https://github.com/apache/incubator-nuttx/pull/1325) can: expose
28162 * [PR-1520](https://github.com/apache/incubator-nuttx/pull/1520) note: Move
28165 * [PR-1288](https://github.com/apache/incubator-nuttx/pull/1288) / PR-1449
28166 note: Add sched\_note\_syscall\_enter/leave hooks for syscall instrumentation
28168 * [PR-1259](https://github.com/apache/incubator-nuttx/pull/1259) note: Add
28169 buffering support for syscall instrumentation
28171 * [PR-1256](https://github.com/apache/incubator-nuttx/pull/1256) note: Add
28172 hooks for note driver for interrupt instrumentation
28174 Board Support -------------
28178 * [PR-1618](https://github.com/apache/incubator-nuttx/pull/1618) metro-m4: Add
28179 support for: SmartFS initialization, AT24 EEPROM, GPIO dev, BQ27426 gauge
28182 * [PR-1727](https://github.com/apache/incubator-nuttx/pull/1729) b-g474e-dpow1:
28183 Add support for FLASH bootloader
28185 * [PR-1683](https://github.com/apache/incubator-nuttx/pull/1683) cxd56xx: Add
28188 * [PR-1668](https://github.com/apache/incubator-nuttx/pull/1668) sim: Add new
28189 configuration for SMP
28191 * [PR-1644](https://github.com/apache/incubator-nuttx/pull/1644)
28192 stm32f746g-disco: Move serial console from USART6 to USART1 which is attached
28195 * [PR-1464](https://github.com/apache/incubator-nuttx/pull/1464) cxd56xx: Add
28196 new GNSS functions, support for lower PWM frequency,
28197 CONFIG\_CPUFREQ\_RELEASE\_LOCK, high speed ADC, HPADC input gain configuration,
28200 * [PR-1405](https://github.com/apache/incubator-nuttx/pull/1405)
28203 * [PR-1402](https://github.com/apache/incubator-nuttx/pull/1402) imxrt1060: Add
28206 * [PR-1590](https://github.com/apache/incubator-nuttx/pull/1590) sim: Add
28209 * [PR-1532](https://github.com/apache/incubator-nuttx/pull/1532) sim: Add
28212 * [PR-1335](https://github.com/apache/incubator-nuttx/pull/1335) cxd56xx:
28217 * [PR-1664](https://github.com/apache/incubator-nuttx/pull/1664) NRF52: Add
28218 support for NRF52832 MakerDiary MDK board
28220 * [PR-1633](https://github.com/apache/incubator-nuttx/pull/1633) NRF52: Add
28221 support for Sparkfun NRF52832 Breakout Board
28223 * [PR-1728](https://github.com/apache/incubator-nuttx/pull/1728) SAMA5D27: Add
28224 support for Giant Board
28226 * [PR-1397](https://github.com/apache/incubator-nuttx/pull/1397) EOSS3: Initial
28227 support for the QuickLogic EOS S3 SoC QuickFeather board
28229 * [PR-1268](https://github.com/apache/incubator-nuttx/pull/1268) STM32: Add
28230 support for nucleo-f412zg board
28232 File System -----------
28236 * [PR-1796](https://github.com/apache/incubator-nuttx/pull/1796) vfs: Fix
28239 * [PR-1794](https://github.com/apache/incubator-nuttx/pull/1794) vfs: Fix issue
28242 * [PR-1793](https://github.com/apache/incubator-nuttx/pull/1793) vfs: Make sure
28246 * [PR-1737](https://github.com/apache/incubator-nuttx/pull/1737) vfs: reuse
28249 * [PR-1490](https://github.com/apache/incubator-nuttx/pull/1490) Ensure that
28252 * [PR-1546](https://github.com/apache/incubator-nuttx/pull/1546) ROMFS: Fix
28253 issue with how hard links are followed for ROMFS
28255 * [PR-1442](https://github.com/apache/incubator-nuttx/pull/1442) SmartFS: Fix
28258 * [PR-1431](https://github.com/apache/incubator-nuttx/pull/1431) nxffs: Fix
28261 PR-1295 fs: for setfd correct the return value
28265 * [PR-1554](https://github.com/apache/incubator-nuttx/pull/1554) CROMFS: Add
28266 support for hard links
28268 * [PR-1499](https://github.com/apache/incubator-nuttx/pull/1499) FAT: Add
28269 support for UTF8 long filename
28271 * [PR-1479](https://github.com/apache/incubator-nuttx/pull/1479) vfs: Add file
28274 * [PR-1582](https://github.com/apache/incubator-nuttx/pull/1482) vfs: Add
28277 * [PR-1579](https://github.com/apache/incubator-nuttx/pull/1579) vfs: Do not
28278 check CONFIG\_NFILE\_STREAMS for mkdir/rename/rmdir/fs\_unlink
28280 * [PR-1355](https://github.com/apache/incubator-nuttx/pull/1355) vfs: Implement
28283 * [PR-1323](https://github.com/apache/incubator-nuttx/pull/1323) vfs: Add
28286 Networking ----------
28290 * [PR-1267](https://github.com/apache/incubator-nuttx/pull/1267) SocketCAN:
28293 * [PR-1446](https://github.com/apache/incubator-nuttx/pull/1446) usrsock: Fix
28298 * [PR-1666](https://github.com/apache/incubator-nuttx/pull/1666) Bluetooth:
28303 * [PR-1581](https://github.com/apache/incubator-nuttx/pull/1581) Socket: Add
28306 * [PR-1443](https://github.com/apache/incubator-nuttx/pull/1443) usrsock: Add
28309 * [PR-1238](https://github.com/apache/incubator-nuttx/pull/1238) SocketCAN: Add
28310 support for SocketCAN interface API
28312 Applications ------------
28316 * [PR-409](https://github.com/apache/incubator-nuttx-apps/pull/409) wamr:
28317 Update version to 09-29-2020 that supports NuttX directly and remove patches
28319 * [PR-407](https://github.com/apache/incubator-nuttx-apps/pull/407) ipcfg: Add
28320 IPv4 configuration file access helper
28322 * [PR-406](https://github.com/apache/incubator-nuttx-apps/pull/406) wamr: Add
28323 configs for heap pool and custom name sections
28325 * [PR-404](https://github.com/apache/incubator-nuttx-apps/pull/404) timer: Add
28328 * [PR-403](https://github.com/apache/incubator-nuttx-apps/pull/402)
28331 * [PR-396](https://github.com/apache/incubator-nuttx-apps/pull/396) wamr: Add
28334 * [PR-395](https://github.com/apache/incubator-nuttx-apps/pull/395) dhcpc: Try
28337 * [PR-391](https://github.com/apache/incubator-nuttx-apps/pull/391) wapi: Add
28340 * [PR-390](https://github.com/apache/incubator-nuttx-apps/pull/390) wapi: App
28343 * [PR-387](https://github.com/apache/incubator-nuttx-apps/pull/387) wamr: Add
28344 support for WAMR web assembly interpreter
28346 * [PR-337](https://github.com/apache/incubator-nuttx-apps/pull/337) docs:
28349 * [PR-333](https://github.com/apache/incubator-nuttx-apps/pull/333) webclient:
28350 Add hooks for TLS, extra request headers, PUT method, report status code,
28353 * [PR-329](https://github.com/apache/incubator-nuttx-apps/pull/329) gpio: Add
28354 support for new GPIO pin types
28356 * [PR-317](https://github.com/apache/incubator-nuttx-apps/pull/317) nshlib:
28357 Call symlink if user pass -s for ln command
28359 * [PR-315](https://github.com/apache/incubator-nuttx-apps/pull/315) c++:
28362 * [PR-314](https://github.com/apache/incubator-nuttx-apps/pull/314) camera: Add
28365 * [PR-378](https://github.com/apache/incubator-nuttx-apps/pull/378) wasm3:
28368 * [PR-374](https://github.com/apache/incubator-nuttx-apps/pull/374) bluetooth:
28371 * [PR-373](https://github.com/apache/incubator-nuttx-apps/pull/373) duktape:
28374 * [PR-372](https://github.com/apache/incubator-nuttx-apps/pull/372) quickjs:
28375 Add support for QuickJS interpreter
28377 * [PR-367](https://github.com/apache/incubator-nuttx-apps/pull/367) nsh: Accept
28380 * [PR-365](https://github.com/apache/incubator-nuttx-apps/pull/365) duktape:
28383 * [PR-364](https://github.com/apache/incubator-nuttx-apps/pull/364) cu:
28384 Refactor cu and add support for "-c" to disable \\n to \\r\\n conversion
28386 * [PR-362](https://github.com/apache/incubator-nuttx-apps/pull/362) libuv: Add
28387 support for libuv library
28389 * [PR-352](https://github.com/apache/incubator-nuttx-apps/pull/352) duktape:
28390 Add initial support for duktape
28392 * [PR-346](https://github.com/apache/incubator-nuttx-apps/pull/364) wget:
28393 Enable URL from command line, can be used with ifup, hooks for HTTPS
28395 * [PR-302](https://github.com/apache/incubator-nuttx-apps/pull/302) lvgl: Use
28398 * [PR-300](https://github.com/apache/incubator-nuttx-apps/pull/300) note: Add
28399 support for decoding interrupt and syscall instrumentation
28401 * [PR-299](https://github.com/apache/incubator-nuttx-apps/pull/299) nxrecorder:
28404 * [PR-296](https://github.com/apache/incubator-nuttx-apps/pull/296) bmp280: Add
28405 support for BMP180 to BMP280 application
28407 * [PR-294](https://github.com/apache/incubator-nuttx-apps/pull/294) can: Add
28408 cansend and candump utilities for interacting with SocketCAN
28412 * [PR-411](https://github.com/apache/incubator-nuttx-apps/pull/411) wgetjson:
28415 * [PR-405](https://github.com/apache/incubator-nuttx-apps/pull/405) nxplayer:
28418 * [PR-400](https://github.com/apache/incubator-nuttx-apps/pull/400) dhcpc:
28421 * [PR-399](https://github.com/apache/incubator-nuttx-apps/pull/399) build: Fix
28424 * [PR-393](https://github.com/apache/incubator-nuttx-apps/pull/393) build: Fix
28427 * [PR-392](https://github.com/apache/incubator-nuttx-apps/pull/392) wapi: Make
28430 * [PR-383](https://github.com/apache/incubator-nuttx-apps/pull/383) ntpclient:
28433 * [PR-344](https://github.com/apache/incubator-nuttx-apps/pull/344) gs2200m:
28436 * [PR-335](https://github.com/apache/incubator-nuttx-apps/pull/335) ntp: Fix
28439 * [PR-331](https://github.com/apache/incubator-nuttx-apps/pull/331) telnetd:
28442 * [PR-312](https://github.com/apache/incubator-nuttx-apps/pull/312) build: Make
28445 * [PR-377](https://github.com/apache/incubator-nuttx-apps/pull/377) readline:
28448 * [PR-359](https://github.com/apache/incubator-nuttx-apps/pull/259) nshlib: Fix
28451 * [PR-354](https://github.com/apache/incubator-nuttx-apps/pull/354) dhcpd: Fix
28452 member name for "ds\_pid"
28475 See * [PR-326](https://github.com/apache/incubator-nuttx-apps/pull/326), git
28477 `[deaa6c5b7bf8445b4a300691525f60aa506be0d7](https://github.com/apache/incubator-nuttx-apps/commit/d…
28482 As part of an effort to unify support for uClibc++ and libc++, the C/C++ include
28484 one central place in `tools/Config.mk`. It is no longer necessary to define
28486 repository have been updated, but if you are building NuttX for a custom board
28494 CINCPATH := ${shell $(INCDIR) -s "$(CC)" $(TOPDIR)$(DELIM)include} CXXINCPATH :=
28495 ${shell $(INCDIR) -s "$(CC)" $(TOPDIR)$(DELIM)include$(DELIM)cxx} ARCHINCLUDES
28502 See * [PR-1396](https://github.com/apache/incubator-nuttx/pull/1396), git
28504 #[d32e9c38dfb0659a7f3c0cf586ba1584cd7eb3d6](https://github.com/apache/incubator-nuttx/commit/d32e9c…
28507 See also * [PR-1399](https://github.com/apache/incubator-nuttx/pull/1399), git
28509 #[6abd03d53ff9164fb17ea4aca701a49fbbf751c0](https://github.com/apache/incubator-nuttx/commit/6abd03…
28518 provided by logic in `tools/Config.mk`. Boards included in the NuttX repository
28519 have been updated, but if you are building NuttX for a custom board, you may
28524 HOSTCC = gcc HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
28528 ifeq ($(CONFIG\_WINDOWS\_NATIVE),y)
28529 HOSTCC = mingw32-gcc.exe
28537 definitions will override the ones in tools/Config.mk.
28539 Also, you may override these definitions for a single run by providing them on
28540 the make command line. This is useful if, for example, you wish to build debug
28541 versions of these host binaries: define HOSTCFLAGS with -g on the command line.
28543 See * [PR-1398](https://github.com/apache/incubator-nuttx/pull/1398), git
28545 #[ee875b2a260cb4cc532b8ca303c2515e24c39b4e](https://github.com/apache/incubator-nuttx/commit/ee875b…
28552 the NuttX repository, but if you are building NuttX for a custom board, you may
28559 ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e
28560 's/^gcc version \\(\[0-9\\.\]\\)/\\1/g' -e 's/\[-\\ \].\*//g' -e '1q'}
28561 ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
28563 See * [PR-1344](https://github.com/apache/incubator-nuttx/pull/1344), git
28565 #[f5311de6b42466ab5c6ef299dab0ecc417131bbe](https://github.com/apache/incubator-nuttx/commit/f5311d…
28574 you are building NuttX for a custom board, you may need to update your board's
28579 EXTRA\_LIBPATHS = -L "${shell dirname "$(LIBSUPXX)"}" EXTRA\_LIBS = -lsupc++
28589 See * [PR-1404](https://github.com/apache/incubator-nuttx/pull/1404), git
28591 #[4910d43ab0fc360dbddb1f8a31db2a3ee383b46d](https://github.com/apache/incubator-nuttx/commit/4910d4…
28594 ### Custom Boards May Not Need CC, CXX, CPP, LD, STRIP, AR, NM, OBJCOPY, and
28598 files with copy-paste duplication spanning many hundreds of files. These are now
28601 been updated, but if you are building NuttX for a custom board, you may need to
28605 If you have lines that define `CC`, `CXX`, `CPP`, `LD`, `STRIP`, `AR`, `NM`,
28608 CC = $(CROSSDEV)gcc CXX = $(CROSSDEV)g++ CPP = $(CROSSDEV)gcc -E -P -x c LD =
28609 $(CROSSDEV)ld STRIP = $(CROSSDEV)strip --strip-unneeded AR = $(ARCROSSDEV)ar rcs
28618 from the definitions in `arch/*/src/*/Toolchain.defs`, leave them as-is and they
28621 See * [PR-1426](https://github.com/apache/incubator-nuttx/pull/1426), git
28623 #[b329e2377dd8816f37ad0408279926829efdf85d](https://github.com/apache/incubator-nuttx/commit/b329e2…
28630 NuttX have been updated, but if you are building NuttX for a custom board, you
28633 See * [PR-1439](https://github.com/apache/incubator-nuttx/pull/1439), git
28635 #[5efa93ec26fd8a3fd85b24a2008bb743f96027fb](https://github.com/apache/incubator-nuttx/commit/5efa93…
28638 NuttX-10.1.0 Release Notes
28639 ------------------------
28648 * Symmetric Multi-Processing (SMP) performance improvements and bug fixes.
28650 * Added support for many microcontrollers and boards, and improved support for many existing ones.
28654 * Improved listing of 3rd party licenses used in NuttX (see LICENSE, NOTICE, and DISCLAIMER-WIP fil…
28659 * [#2324](https://github.com/apache/incubator-nuttx/pull/2324) audio: libsamplerate: add initial au…
28660 * [#2820](https://github.com/apache/incubator-nuttx/pull/2820) arch, boards, drivers, include, sche…
28661 * [#2885](https://github.com/apache/incubator-nuttx/pull/2885) Ensure the kernel component don't ca…
28664 * [#1852](https://github.com/apache/incubator-nuttx/pull/1852) sysconf: add _SC_PAGESIZE sysconf su…
28665 …22](https://github.com/apache/incubator-nuttx/pull/1922) sched: nxtask_start should call entry poi…
28666 * [#1994](https://github.com/apache/incubator-nuttx/pull/1994) libc: Don't fclose and fopen file in…
28667 * [#2005](https://github.com/apache/incubator-nuttx/pull/2005) Fix note_syscall_leave_s to avoid un…
28668 * [#2043](https://github.com/apache/incubator-nuttx/pull/2043) sched: Add SCHED_INSTRUMENTATION_HIR…
28669 * [#2044](https://github.com/apache/incubator-nuttx/pull/2044) sched: Add note_syscall args support
28670 * [#2071](https://github.com/apache/incubator-nuttx/pull/2071) pollnotify: we should send poll even…
28671 * [#2076](https://github.com/apache/incubator-nuttx/pull/2076) libc: math: Make this friendly with …
28672 * [#2111](https://github.com/apache/incubator-nuttx/pull/2111) LIBCXX related fixes
28673 * [#2147](https://github.com/apache/incubator-nuttx/pull/2147) sched: Use nx_close() inside OS
28674 …2176](https://github.com/apache/incubator-nuttx/pull/2176) syscall/syscall.csv: Increase number of…
28675 …(https://github.com/apache/incubator-nuttx/pull/2204) sched: irq: Fix enter_critical_section() in …
28676 * [#2218](https://github.com/apache/incubator-nuttx/pull/2218) sched: signal.h: fix compile failed …
28677 * [#2229](https://github.com/apache/incubator-nuttx/pull/2229) sched/sched/sched_waitid.c: Allow WN…
28678 * [#2236](https://github.com/apache/incubator-nuttx/pull/2236) sched/task/task_exithook.c: Remove a…
28679 …ubator-nuttx/pull/2243) libcxx: Update [0001-libcxx-Port-to-NuttX-https-nuttx.apache.org](http://0…
28680 * [#2255](https://github.com/apache/incubator-nuttx/pull/2255) sys/epoll: sync the epoll define wit…
28681 * [#2256](https://github.com/apache/incubator-nuttx/pull/2256) unistd/sched_sporadic: correct the d…
28682 * [#2261](https://github.com/apache/incubator-nuttx/pull/2261) sched/timer: add support of CLOCK_MO…
28683 * [#2262](https://github.com/apache/incubator-nuttx/pull/2262) sched/init: init the default home di…
28684 * [#2285](https://github.com/apache/incubator-nuttx/pull/2285) libc/stdlib: Fix range check in strt…
28685 * [#2326](https://github.com/apache/incubator-nuttx/pull/2326) libc: Enhance getopt function
28686 * [#2407](https://github.com/apache/incubator-nuttx/pull/2407) libc: machine: arch: Support armv8-m…
28687 * [#2418](https://github.com/apache/incubator-nuttx/pull/3447) libc: Change OK/ERROR from macro to …
28688 * [#2420](https://github.com/apache/incubator-nuttx/pull/2420) sched/signal: Remove redundant checks
28689 * [#2437](https://github.com/apache/incubator-nuttx/pull/2765) sched/sched/sched_waitpid.c: Fix ret…
28690 * [#2449](https://github.com/apache/incubator-nuttx/pull/2449) mm/circbuf: fix the problem of divid…
28691 * [#2450](https://github.com/apache/incubator-nuttx/pull/2450) unistd/getopt: remove number of argu…
28692 * [#2451](https://github.com/apache/incubator-nuttx/pull/2451) libc: pthread_mutexattr_getprotocol:…
28693 * [#2455](https://github.com/apache/incubator-nuttx/pull/2455) sched/sched/sched_waitpid.c: Discard…
28694 * [#2475](https://github.com/apache/incubator-nuttx/pull/2475) sched/sched_waitid.c: Fix two bugs w…
28695 * [#2487](https://github.com/apache/incubator-nuttx/pull/2487) sched: clock/time: add CLOCK_BOOTTIM…
28696 * [#2492](https://github.com/apache/incubator-nuttx/pull/2492) procfs: make array const to reduce m…
28697 * [#2494](https://github.com/apache/incubator-nuttx/pull/2494) sched: Fix SMP
28698 * [#2509](https://github.com/apache/incubator-nuttx/pull/2509) libc: net: implement ether_aton/ethe…
28699 * [#2517](https://github.com/apache/incubator-nuttx/pull/2517) sched: spinlock: Introduce SP_WFE() …
28700 * [#2518](https://github.com/apache/incubator-nuttx/pull/2518) sched: Don't forward gettid to getpi…
28701 * [#2530](https://github.com/apache/incubator-nuttx/pull/2530) libc: Implement posix_fallocate
28702 * [#2533](https://github.com/apache/incubator-nuttx/pull/2533) sched: Make the number of queue/sign…
28703 * [#2534](https://github.com/apache/incubator-nuttx/pull/2534) libc: Implement getppid
28704 * [#2538](https://github.com/apache/incubator-nuttx/pull/2538) sched: pthread: Fix potential bugs i…
28705 * [#2574](https://github.com/apache/incubator-nuttx/pull/2574) libc: dumpbuffer: dump buffer enhanc…
28706 …(https://github.com/apache/incubator-nuttx/pull/2580) sched: arch & sched: task: Fix up_exit() and…
28707 * [#2585](https://github.com/apache/incubator-nuttx/pull/2585) libc: netdb: Move hostbuffer out of …
28708 * [#2602](https://github.com/apache/incubator-nuttx/pull/2740) sched: Add include/sys/poll.h
28709 * [#2604](https://github.com/apache/incubator-nuttx/pull/2604) libc: Add b64_ntop and b64_pton impl…
28710 * [#2616](https://github.com/apache/incubator-nuttx/pull/2616) libc/dumpvbuffer: update the vector …
28711 * [#2624](https://github.com/apache/incubator-nuttx/pull/2624) sched: implement the default test-an…
28712 * [#2627](https://github.com/apache/incubator-nuttx/pull/2627) OS internal function should indicate…
28713 * [#2630](https://github.com/apache/incubator-nuttx/pull/2630) libc: net: implement socketpair
28714 * [#2631](https://github.com/apache/incubator-nuttx/pull/2631) sched: mqueue: simplify the mqueue r…
28715 * [#2650](https://github.com/apache/incubator-nuttx/pull/2650) libc: ctype/iscntrl: correct the con…
28716 …tps://github.com/apache/incubator-nuttx/pull/2653) sched: Don't call sched_lock()/unlock() in nx_w…
28717 * [#2668](https://github.com/apache/incubator-nuttx/pull/2668) Kernel module should prefer function…
28718 * [#2675](https://github.com/apache/incubator-nuttx/pull/2675) libc: Add placement new and new[] fu…
28719 * [#2693](https://github.com/apache/incubator-nuttx/pull/2693) libxx: use built-in __aeabi_atexit()…
28720 * [#2694](https://github.com/apache/incubator-nuttx/pull/2694) libc/machine/arch: fix build break i…
28721 * [#2719](https://github.com/apache/incubator-nuttx/pull/2719) sched/task: setup the scheduling pol…
28722 * [#2726](https://github.com/apache/incubator-nuttx/pull/2726) sched: sched: Remove sched_lock/unlo…
28723 * [#2737](https://github.com/apache/incubator-nuttx/pull/2737) sched: task: Fix a potential bug in …
28724 * [#2740](https://github.com/apache/incubator-nuttx/pull/2740) sched/timer: get the previous reload…
28725 * [#2741](https://github.com/apache/incubator-nuttx/pull/2741) libc: unistd/fpathconf: enhance fpat…
28726 * [#2742](https://github.com/apache/incubator-nuttx/pull/2742) libc: pthread/cond: enhance pthread_…
28727 * [#2744](https://github.com/apache/incubator-nuttx/pull/2744) sched: task: Fix comments and label …
28728 * [#2765](https://github.com/apache/incubator-nuttx/pull/2765) sched: pthread: Return get_errno ins…
28729 * [#2767](https://github.com/apache/incubator-nuttx/pull/2767) sched/wqueue/notifier: protect the w…
28730 * [#2797](https://github.com/apache/incubator-nuttx/pull/2797) sched: group: Fix group_kill_childre…
28731 * [#2849](https://github.com/apache/incubator-nuttx/pull/2849) mqueue: Add _MQ_OPEN, _MQ_CLOSE and …
28732 * [#2855](https://github.com/apache/incubator-nuttx/pull/2855) libs: Remove the duplicated _NX_ and…
28733 * [#2865](https://github.com/apache/incubator-nuttx/pull/2865) libc: :machine:risc-v:unifying elf r…
28734 * [#2872](https://github.com/apache/incubator-nuttx/pull/2872) sched: pthread: Fix pthread cmdline …
28735 * [#2881](https://github.com/apache/incubator-nuttx/pull/2881) libc: Move stack check stuff from li…
28736 * [#2904](https://github.com/apache/incubator-nuttx/pull/2904) libc: unistd/getcwd: enhance getcwd …
28737 * [#2906](https://github.com/apache/incubator-nuttx/pull/2906) mm: umm_heap: valloc: support valloc…
28738 * [#2910](https://github.com/apache/incubator-nuttx/pull/2910) libc/hex2bin: fix handling of segmen…
28739 * [#2919](https://github.com/apache/incubator-nuttx/pull/2919) sched: fix fd leak in dlopen
28740 …38](https://github.com/apache/incubator-nuttx/pull/2938) libs: misc: Remove critical section in li…
28741 * [#2942](https://github.com/apache/incubator-nuttx/pull/2492) mtd: progmem: Add up_progmem_read ca…
28742 * [#2946](https://github.com/apache/incubator-nuttx/pull/2946) sched: task: Call nxtask_flushstream…
28743 * [#2960](https://github.com/apache/incubator-nuttx/pull/2960) sched: signal: sigdeliver: fix syste…
28744 * [#2980](https://github.com/apache/incubator-nuttx/pull/2980) include: Add iso646.h for alternativ…
28745 * [#2981](https://github.com/apache/incubator-nuttx/pull/2981) sched: Remove all group id related s…
28746 * [#3033](https://github.com/apache/incubator-nuttx/pull/3033) unistd: Fix getpriority not handling…
28747 * [#3080](https://github.com/apache/incubator-nuttx/pull/3080) sched: semaphore: Remove a redundant…
28748 * [#3083](https://github.com/apache/incubator-nuttx/pull/3083) libc: stdio/lib_clearerr: Did not cl…
28749 * [#3086](https://github.com/apache/incubator-nuttx/pull/3086) mm: improve the memory manager modul…
28750 * [#3111](https://github.com/apache/incubator-nuttx/pull/3111) sched: Sporadic scheduler: Fix time …
28751 * [#3115](https://github.com/apache/incubator-nuttx/pull/3115) libc: time: localtime: fix race cond…
28752 * [#3121](https://github.com/apache/incubator-nuttx/pull/3121) mm/heap: Move semaphore related decl…
28753 * [#3123](https://github.com/apache/incubator-nuttx/pull/3123) sched: pthread: Remove a redundant c…
28754 * [#3131](https://github.com/apache/incubator-nuttx/pull/3131) mm: Minor fix for heap manager
28755 * [#3159](https://github.com/apache/incubator-nuttx/pull/3159) mm: mm_heap: Remove critical section…
28756 * [#3170](https://github.com/apache/incubator-nuttx/pull/3170) libc: Move getopt() variables into T…
28757 * [#3196](https://github.com/apache/incubator-nuttx/pull/3196) sched/signal: Implement SA_NODEFER
28758 * [#3228](https://github.com/apache/incubator-nuttx/pull/3228) mm/mm_heap: fix compile failed when …
28759 … [#3244](https://github.com/apache/incubator-nuttx/pull/3244) libdsp: Improvements for libdsp and …
28760 * [#3247](https://github.com/apache/incubator-nuttx/pull/3247) sched: Move the default Task Stack s…
28761 * [#3251](https://github.com/apache/incubator-nuttx/pull/3251) libc: update pthread_once according …
28762 * [#3253](https://github.com/apache/incubator-nuttx/pull/3253) libc pthread: Fix pthread_rwlock_ini…
28763 * [#3268](https://github.com/apache/incubator-nuttx/pull/3268) libdsp/fixed16: add open-loop handler
28764 * [#3272](https://github.com/apache/incubator-nuttx/pull/3272) libc: Implement getopt_long() and ge…
28765 * [#3280](https://github.com/apache/incubator-nuttx/pull/3280) libc: Correct some getopt() logic
28766 * [#3289](https://github.com/apache/incubator-nuttx/pull/3289) sched: task: Fix to initialize the t…
28767 * [#3294](https://github.com/apache/incubator-nuttx/pull/2418) libc: getopt(): Fix Use of Pointer b…
28768 * [#3299](https://github.com/apache/incubator-nuttx/pull/3299) libc: getopt_common(): Correct handl…
28769 * [#3308](https://github.com/apache/incubator-nuttx/pull/3308) libc: getopt_long(): Add support for…
28770 * [#3445](https://github.com/apache/incubator-nuttx/pull/3445) libc: update stream getoffset to han…
28771 * [#3447](https://github.com/apache/incubator-nuttx/pull/2450) libc: correct zoneinfo genromfs sour…
28776 * [#1834](https://github.com/apache/incubator-nuttx/pull/1834) License/authorship handling scripts
28777 * [#2107](https://github.com/apache/incubator-nuttx/pull/2107) build: Makefile should reference CON…
28778 … [#2392](https://github.com/apache/incubator-nuttx/pull/2392) configure.sh: support custom board b…
28779 * [#2824](https://github.com/apache/incubator-nuttx/pull/2824) build/esp32: Create Flash size confi…
28780 * [#3317](https://github.com/apache/incubator-nuttx/pull/3317) tols: Update python scripts to py3 a…
28783 …ps://github.com/apache/incubator-nuttx/pull/1890) make/expression: improving up asm/C/C++ compile …
28784 * [#1940](https://github.com/apache/incubator-nuttx/pull/1940) cygwin build - path issue fix for Re…
28785 * [#2032](https://github.com/apache/incubator-nuttx/pull/2032) build: Change .external_dummy to dum…
28786 * [#2101](https://github.com/apache/incubator-nuttx/pull/2101) build: Add $(OBJS) and $(BIN) to CLE…
28787 …ttps://github.com/apache/incubator-nuttx/pull/2192) build: Move __NuttX__ definition to tools/[Con…
28788 * [#2221](https://github.com/apache/incubator-nuttx/pull/2221) tools: Avoid messing the final binar…
28789 * [#2335](https://github.com/apache/incubator-nuttx/pull/2335) build: Parallelize depend file gener…
28790 * [#2380](https://github.com/apache/incubator-nuttx/pull/2380) tools: Fix nuttx-gdbinit for armv7-m…
28791 * [#2404](https://github.com/apache/incubator-nuttx/pull/2404) Update checkrelease script to check …
28792 …[#2411](https://github.com/apache/incubator-nuttx/pull/2411) tools: Add 'handle SIGUSR1' to nuttx-…
28793 * [#2432](https://github.com/apache/incubator-nuttx/pull/2432) build system: add missing --obj-path…
28794 * [#2557](https://github.com/apache/incubator-nuttx/pull/2557) tools/version.sh: Fix the version re…
28795 * [#2561](https://github.com/apache/incubator-nuttx/pull/2561) tools: Fix version.sh
28796 …2642](https://github.com/apache/incubator-nuttx/pull/2642) tools/version.sh: Fix the version retri…
28797 * [#2673](https://github.com/apache/incubator-nuttx/pull/2673) tools: esp32: add a gdb script to sh…
28798 * [#2679](https://github.com/apache/incubator-nuttx/pull/2679) tools: esp32: btdecode.sh: Script to…
28799 * [#2701](https://github.com/apache/incubator-nuttx/pull/2701) tools: gdbinit: add support for repo…
28800 * [#2729](https://github.com/apache/incubator-nuttx/pull/2729) tools: esp32: backtrace.gdbscript: A…
28801 * [#2803](https://github.com/apache/incubator-nuttx/pull/2803) tools: esp32: Remove some duplicated…
28802 * [#2882](https://github.com/apache/incubator-nuttx/pull/2882) tools: esp32: refine the QEMU image …
28803 * [#2895](https://github.com/apache/incubator-nuttx/pull/2895) tools: esp32: fix warnings from Shel…
28804 * [#2930](https://github.com/apache/incubator-nuttx/pull/2930) tools: version.sh: If the version is…
28805 * [#2982](https://github.com/apache/incubator-nuttx/pull/2982) tools: nxstyle: Verify relative path…
28806 * [#3004](https://github.com/apache/incubator-nuttx/pull/3004) tools: esp32XX: Delete the Makefile …
28807 * [#3012](https://github.com/apache/incubator-nuttx/pull/3012) tools: esp32xx: Few fixes/improvemen…
28808 * [#3017](https://github.com/apache/incubator-nuttx/pull/3017) tools: esp32: [Config.mk](http://Con…
28809 * [#3094](https://github.com/apache/incubator-nuttx/pull/3094) tools: version.sh: Fix PATCH includi…
28814 * [#1995](https://github.com/apache/incubator-nuttx/pull/1995) arch: Add custom arch chip build sup…
28815 * [#2161](https://github.com/apache/incubator-nuttx/pull/2161) Added Support for more TI Tiva Micro…
28816 * [#2566](https://github.com/apache/incubator-nuttx/pull/2566) arch/risc-v: Add BL602 support
28817 * [#2974](https://github.com/apache/incubator-nuttx/pull/2974) STM32L5 Architecture Support
28818 * [#3001](https://github.com/apache/incubator-nuttx/pull/3001) arch:riscv64:basic porting for C906
28819 * [#3023](https://github.com/apache/incubator-nuttx/pull/3023) Remove nr5m100 and gap8 support
28824 * [#2042](https://github.com/apache/incubator-nuttx/pull/2042) Fix interrupt stack handlings for AR…
28825 * [#2061](https://github.com/apache/incubator-nuttx/pull/2061) Refactor arm interrupt stack related…
28826 …[#2309](https://github.com/apache/incubator-nuttx/pull/2309) Fix armv7-a L2CC and apply the code t…
28827 * [#2876](https://github.com/apache/incubator-nuttx/pull/2876) arm: ARMv6-M vector table offset reg…
28828 * [#2932](https://github.com/apache/incubator-nuttx/pull/2932) arch: armv6-m: Apply armv7-m signal …
28829 * [#2944](https://github.com/apache/incubator-nuttx/pull/2944) armv8-m: Fix EXC_RETURN for non-secu…
28830 * [#2990](https://github.com/apache/incubator-nuttx/pull/2990) arch/armv7-m: Adds dwt helper functi…
28833 * [#2614](https://github.com/apache/incubator-nuttx/pull/2614) bl602: Update register maps and lowe…
28834 * [#2633](https://github.com/apache/incubator-nuttx/pull/2633) BL602: Add support for system reset …
28835 * [#2655](https://github.com/apache/incubator-nuttx/pull/2655) arch/risc-v/bl602 : add pwm onshot w…
28836 * [#2659](https://github.com/apache/incubator-nuttx/pull/2659) arch/risc-v/bl602 : add spiflash(har…
28837 * [#2669](https://github.com/apache/incubator-nuttx/pull/2669) risc-v/bl602 : add gpioirq、 i2c(mast…
28838 * [#2804](https://github.com/apache/incubator-nuttx/pull/2804) arch/risc-v/bl602: spi_master suppor…
28839 * [#2809](https://github.com/apache/incubator-nuttx/pull/2809) arch:risc-v:bl602: enable FPU for th…
28840 * [#2836](https://github.com/apache/incubator-nuttx/pull/2836) :risc-v:bl602:add support for elf fi…
28841 * [#2991](https://github.com/apache/incubator-nuttx/pull/2991) risc-v/bl602: Add wifi and ble suppo…
28844 * [#2750](https://github.com/apache/incubator-nuttx/pull/2750) arch: cxd56xx: Add i2c bitbang lower…
28845 * [#2830](https://github.com/apache/incubator-nuttx/pull/2830) Driver-specific spinlock for cxd56_s…
28848 * [#1893](https://github.com/apache/incubator-nuttx/pull/1893) Add ESP32 WiFi adapter and driver
28849 * [#1942](https://github.com/apache/incubator-nuttx/pull/1942) Implement BASIC reset logic
28850 * [#1945](https://github.com/apache/incubator-nuttx/pull/1945) Added Timer Support
28851 * [#1958](https://github.com/apache/incubator-nuttx/pull/1958) When PSRAM is enabled allow drivers …
28852 * [#1978](https://github.com/apache/incubator-nuttx/pull/1978) Add power management of deep-sleep
28853 * [#2074](https://github.com/apache/incubator-nuttx/pull/2074) Add real-time timer support for WiFi
28854 * [#2138](https://github.com/apache/incubator-nuttx/pull/2138) Add Partition and OTA device
28855 * [#2199](https://github.com/apache/incubator-nuttx/pull/2199) SPI Flash driver uses global sem for…
28856 * [#2224](https://github.com/apache/incubator-nuttx/pull/2224) Add SPI Flash hardware encryption I/…
28857 * [#2234](https://github.com/apache/incubator-nuttx/pull/2234) Include cache workaround to PSRAM
28858 * [#2242](https://github.com/apache/incubator-nuttx/pull/2242) Watchdog support (MWDTs)
28859 * [#2269](https://github.com/apache/incubator-nuttx/pull/2269) Add high memory support to work with…
28860 * [#2294](https://github.com/apache/incubator-nuttx/pull/2294) Refactor ESP32 Wi-Fi driver
28861 * [#2296](https://github.com/apache/incubator-nuttx/pull/2296) added support to automonitor by capt…
28862 * [#2474](https://github.com/apache/incubator-nuttx/pull/2474) Optimize IRAM usage based on esp-idf
28863 * [#2514](https://github.com/apache/incubator-nuttx/pull/2514) allows the rtc wdt to be configured …
28864 * [#2515](https://github.com/apache/incubator-nuttx/pull/2515) Added support for RTC WDT
28865 * [#2550](https://github.com/apache/incubator-nuttx/pull/2550) enables started flag if the wdt was …
28866 * [#2613](https://github.com/apache/incubator-nuttx/pull/2613) Added driver api to reload counter i…
28867 * [#2716](https://github.com/apache/incubator-nuttx/pull/2716) Add AES hardware accelerator driver
28868 * [#2721](https://github.com/apache/incubator-nuttx/pull/2613) Add efuse driver
28869 * [#2831](https://github.com/apache/incubator-nuttx/pull/2831) Writeback PSRAM data when mapping SP…
28870 * [#2840](https://github.com/apache/incubator-nuttx/pull/2840) Add esp32_gpio_matrix_in/out to repl…
28871 * [#2858](https://github.com/apache/incubator-nuttx/pull/2858) Fix a memory leak when discarding a …
28872 * [#2939](https://github.com/apache/incubator-nuttx/pull/2939) Refactor ESP32 WiFi driver to suppor…
28873 * [#2947](https://github.com/apache/incubator-nuttx/pull/2947) esp32_ummap: write back spiram cache…
28874 * [#2965](https://github.com/apache/incubator-nuttx/pull/2965) Add more flash options to esptool
28875 * [#2979](https://github.com/apache/incubator-nuttx/pull/2979) Add support for I2C tracing
28876 * [#2983](https://github.com/apache/incubator-nuttx/pull/2983) Extract memory layout definitions to…
28877 * [#2999](https://github.com/apache/incubator-nuttx/pull/2999) Add WPA2 Enterprise and WPA3 support
28878 * [#3003](https://github.com/apache/incubator-nuttx/pull/3003) Re-organise the different heap regio…
28879 * [#3048](https://github.com/apache/incubator-nuttx/pull/3048) timer driver refactor
28880 * [#3233](https://github.com/apache/incubator-nuttx/pull/3233) Bugfixes and Improvements for SPI DM…
28883 * [#2870](https://github.com/apache/incubator-nuttx/pull/2870) Support for ESP32-C3 GPIO Driver
28884 * [#2875](https://github.com/apache/incubator-nuttx/pull/2875) risc-v/esp32c3: Add support for Main…
28885 * [#2901](https://github.com/apache/incubator-nuttx/pull/2901) esp32c3: Add system reset.
28886 * [#2965](https://github.com/apache/incubator-nuttx/pull/2965) ESP32XX: Add more flash options to e…
28887 * [#3006](https://github.com/apache/incubator-nuttx/pull/3006) esp32-c3: Adds timer driver
28888 * [#3007](https://github.com/apache/incubator-nuttx/pull/3007) risc-v/esp32-c3: complements serial …
28889 * [#3028](https://github.com/apache/incubator-nuttx/pull/3028) ESP32-C3: Add I2C drive
28890 * [#3029](https://github.com/apache/incubator-nuttx/pull/3029) esp32-c3: Adds termios support
28891 * [#3040](https://github.com/apache/incubator-nuttx/pull/3040) riscv/esp32c3: Add ESP32-C3 WLAN net…
28892 * [#3126](https://github.com/apache/incubator-nuttx/pull/3126) risc-v/esp32-c3: Add support to SPI …
28893 * [#3160](https://github.com/apache/incubator-nuttx/pull/3160) riscv/esp32c3: Add standard C atomic…
28896 * [#2595](https://github.com/apache/incubator-nuttx/pull/2595) Add imx_enet driver
28899 * [#2212](https://github.com/apache/incubator-nuttx/pull/2212) imxrt: adds support for WDOG1
28900 * [#2354](https://github.com/apache/incubator-nuttx/pull/2354) imxrt: Added support for DP83825I PHY
28901 * [#2461](https://github.com/apache/incubator-nuttx/pull/2461) imxrt: Added NETDEV_LATEINIT option …
28902 * [#2471](https://github.com/apache/incubator-nuttx/pull/2471) imxrt: Support serial single-wire mo…
28903 * [#2929](https://github.com/apache/incubator-nuttx/pull/2929) imxrt: changes to FlexCAN driver sup…
28906 …(https://github.com/apache/incubator-nuttx/pull/2148) nrf52_wdt: split into low-level API and watc…
28907 * [#2149](https://github.com/apache/incubator-nuttx/pull/2149) nrf52832: add errata mitigation code…
28908 * [#2182](https://github.com/apache/incubator-nuttx/pull/2182) nrf52: support configuring no consol…
28909 * [#2189](https://github.com/apache/incubator-nuttx/pull/2189) nrf52_spi: support unconnected MISO/…
28910 * [#2207](https://github.com/apache/incubator-nuttx/pull/2207) nrf52: add POWER register definition…
28911 * [#2270](https://github.com/apache/incubator-nuttx/pull/2270) nRF52 SPI improvements
28912 * [#2440](https://github.com/apache/incubator-nuttx/pull/2440) nrf52 ADC: minor fixes
28913 * [#2674](https://github.com/apache/incubator-nuttx/pull/2674) nrf52_i2c: add support for I2C_M_NOS…
28914 * [#2705](https://github.com/apache/incubator-nuttx/pull/2705) nrf52: Add a static copy buffer for …
28915 * [#2712](https://github.com/apache/incubator-nuttx/pull/2712) nRF52: support stack coloration
28916 * [#2717](https://github.com/apache/incubator-nuttx/pull/2717) I2C bitbang driver (and nRF52 implem…
28917 * [#2735](https://github.com/apache/incubator-nuttx/pull/2735) nRF52: add support for building Soft…
28918 * [#2756](https://github.com/apache/incubator-nuttx/pull/2756) nrf52: add stackcheck support
28921 * [#2916](https://github.com/apache/incubator-nuttx/pull/2916) rp2040: Raspberry Pi Pico SMP support
28922 * [#2927](https://github.com/apache/incubator-nuttx/pull/2927) rp2040: Fix LDFLAGS for boot stage2
28923 * [#2952](https://github.com/apache/incubator-nuttx/pull/2952) rp2040: Add I2C driver support
28924 * [#2986](https://github.com/apache/incubator-nuttx/pull/2986) rp2040: Add SPI driver support
28925 * [#3002](https://github.com/apache/incubator-nuttx/pull/3002) rp2040: SPI driver DMA transfer supp…
28926 * [#3057](https://github.com/apache/incubator-nuttx/pull/3057) rp2040: Fix SPI halfword DMA transfer
28929 * [#2900](https://github.com/apache/incubator-nuttx/pull/2900) s32k1xx: Support ramfunc
28932 * [#2010](https://github.com/apache/incubator-nuttx/pull/2010) arch/arm/src/stm32h7/stm32_spi.c: fi…
28933 * [#2095](https://github.com/apache/incubator-nuttx/pull/2095) arch: stm32: fix otghs logic to supp…
28934 * [#2177](https://github.com/apache/incubator-nuttx/pull/2177) FLASH waiting cycles are configured …
28935 * [#2180](https://github.com/apache/incubator-nuttx/pull/2180) stm32 - Add register mappings for ST…
28936 … [#2194](https://github.com/apache/incubator-nuttx/pull/2194) stm32 - Add register mappings for ST…
28937 …[#2273](https://github.com/apache/incubator-nuttx/pull/2273) stm32/stm32_spi: Add SPI register def…
28938 * [#2288](https://github.com/apache/incubator-nuttx/pull/2288) stm32: Add DMAMUX register mappings …
28939 …ps://github.com/apache/incubator-nuttx/pull/2325) arch/arm/src/stm32/stm32_serial.c: for flowcontr…
28940 * [#2473](https://github.com/apache/incubator-nuttx/pull/2473) STM32 - Add ADC register definitions…
28941 * [#2477](https://github.com/apache/incubator-nuttx/pull/2477) STM32 FLASH latency is calculated ba…
28942 * [#2985](https://github.com/apache/incubator-nuttx/pull/2985) stm32 Ethernet hardening
28945 * [#2209](https://github.com/apache/incubator-nuttx/pull/2209) stm32f7/stm32_serial.c: fix console …
28946 * [#3489](https://github.com/apache/incubator-nuttx/pull/3489) stm32f7: Freeze tickless timer durin…
28949 * [#2880](https://github.com/apache/incubator-nuttx/pull/2880) stm32h7: add definitions for DAC
28950 * [#2955](https://github.com/apache/incubator-nuttx/pull/2955) stm32h7:Add DBGMCU missing from mast…
28951 * [#2994](https://github.com/apache/incubator-nuttx/pull/2994) stm32h7: Allow custom clock configur…
28952 * [#3143](https://github.com/apache/incubator-nuttx/pull/3143) stm32h7: DMA BDMA does not auto disa…
28953 * [#3207](https://github.com/apache/incubator-nuttx/pull/3207) usbhost: Add usb host tracing string…
28954 * [#3458](https://github.com/apache/incubator-nuttx/pull/3458) stm32h7: Adds stm32_dbgmcu.h to matc…
28955 * [#3461](https://github.com/apache/incubator-nuttx/pull/3461) stm32h7: Expose flash lock, unlock, …
28958 * [#2068](https://github.com/apache/incubator-nuttx/pull/2068) STM32L4: Improvements on ADC driver
28959 * [#2178](https://github.com/apache/incubator-nuttx/pull/2178) STM32L4 ADC driver: extenal event co…
28960 * [#2220](https://github.com/apache/incubator-nuttx/pull/2220) STM32L4 TIMER: Add some helper funct…
28961 * [#2232](https://github.com/apache/incubator-nuttx/pull/2232) STM32L4 ADC: Add injected channel su…
28964 … [#3090](https://github.com/apache/incubator-nuttx/pull/3090) stm32l5: Optional LSE xtal drive str…
28967 * [#2469](https://github.com/apache/incubator-nuttx/pull/2469) USB Host Driver Support
28969 #### Risc-V
28970 * [#2470](https://github.com/apache/incubator-nuttx/pull/2470) risc-v: Introduce basic setjmp suppo…
28971 * [#2918](https://github.com/apache/incubator-nuttx/pull/2918) risc-v: up_sigdeliver missing fpu co…
28974 * [#2928](https://github.com/apache/incubator-nuttx/pull/2928) rv64:add API up_copyfullstate for la…
28975 * [#3018](https://github.com/apache/incubator-nuttx/pull/3018) rv64:c906:enable DP FPU support
28976 * [#3073](https://github.com/apache/incubator-nuttx/pull/3073) rv64:c906:demo protect build without…
28977 * [#3087](https://github.com/apache/incubator-nuttx/pull/3087) rv64: keep the stack to be 16bytes a…
28978 * [#3098](https://github.com/apache/incubator-nuttx/pull/3098) rv64:fix 64bit data type and instruc…
28979 … [#3203](https://github.com/apache/incubator-nuttx/pull/3203) rv64:c906:add risc-v PMP and change …
28982 * [#1933](https://github.com/apache/incubator-nuttx/pull/1933) Add support to PSRAM using SPIRAM in…
28983 * [#2014](https://github.com/apache/incubator-nuttx/pull/2014) Add the optional interrupt stack to …
28984 * [#2352](https://github.com/apache/incubator-nuttx/pull/2352) Print the bakctrace on assertions
28985 * [#2504](https://github.com/apache/incubator-nuttx/pull/2504) Get full backtrace from interrupts.
28986 * [#3015](https://github.com/apache/incubator-nuttx/pull/3015) hostfs: Make host_stat populate st_s…
28990 * [#1904](https://github.com/apache/incubator-nuttx/pull/1904) xtensa: ESP32: Fixed the type of cpu…
28991 * [#1943](https://github.com/apache/incubator-nuttx/pull/1943) xtensa: ESP32: Fix and clean some co…
28992 * [#1947](https://github.com/apache/incubator-nuttx/pull/1947) xtensa: esp32: Fix crash on startup
28993 * [#1948](https://github.com/apache/incubator-nuttx/pull/1948) xtensa: ESP32: Fixes the GPIO's func…
28994 * [#1960](https://github.com/apache/incubator-nuttx/pull/1960) xtensa: xtensa.h: Include sys/types.…
28995 * [#1968](https://github.com/apache/incubator-nuttx/pull/1968) arm: kinetis: freedom-k64f: Declare …
28996 * [#1990](https://github.com/apache/incubator-nuttx/pull/1990) arm: kinetis: flexcan fixed compile …
28997 …#2120](https://github.com/apache/incubator-nuttx/pull/2120) arm: stm32h7: Fix missing 'ret' report…
28998 * [#2159](https://github.com/apache/incubator-nuttx/pull/2159) xtensa: esp32: Fix SPI master DMA RX…
28999 * [#2160](https://github.com/apache/incubator-nuttx/pull/2160) arm: stm32l4/stm32l4_adc.c: fix copy…
29000 * [#2210](https://github.com/apache/incubator-nuttx/pull/2210) arm: stm32/stm32_adc.c: do not allow…
29001 * [#2214](https://github.com/apache/incubator-nuttx/pull/2214) xtensa: esp32: Fix rt-timer issues
29002 * [#2233](https://github.com/apache/incubator-nuttx/pull/2233) xtensa: esp32: Fix the memory region…
29003 * [#2240](https://github.com/apache/incubator-nuttx/pull/2240) arm: nrf52 GPIO/GPIOTE: better expos…
29004 * [#2284](https://github.com/apache/incubator-nuttx/pull/2284) arm: stm32h7/stm32_dmamux.h: Fix err…
29005 * [#2286](https://github.com/apache/incubator-nuttx/pull/2286) arm: stm32f0l0g0/stm32_dmamux.h: Fix…
29006 * [#2287](https://github.com/apache/incubator-nuttx/pull/2287) arm: stm32h7/stm32_dmamux.h: Add mis…
29007 * [#2300](https://github.com/apache/incubator-nuttx/pull/2300) arm: sam34: compile error on SAM34 T…
29008 * [#2316](https://github.com/apache/incubator-nuttx/pull/2844) risc-v: minor fix
29009 * [#2330](https://github.com/apache/incubator-nuttx/pull/2330) xtensa: esp32/esp32_tim.c: Fix build…
29010 * [#2336](https://github.com/apache/incubator-nuttx/pull/2336) arm: stm32l4: correct macros STM32L4…
29011 * [#2344](https://github.com/apache/incubator-nuttx/pull/2344) xtensa: esp32/esp32_gpio.c: Fix GPIO…
29012 * [#2351](https://github.com/apache/incubator-nuttx/pull/2351) xtensa: esp32: Fix issues of force-s…
29013 * [#2355](https://github.com/apache/incubator-nuttx/pull/2355) xtensa: esp32_himem: Fix issue that …
29014 * [#2361](https://github.com/apache/incubator-nuttx/pull/2361) arm: nrf52 GPIO: minor fixes
29015 * [#2364](https://github.com/apache/incubator-nuttx/pull/2364) arm: stm32h7: Fix bug where more tha…
29016 * [#2372](https://github.com/apache/incubator-nuttx/pull/2372) rv64: Fix SCN/PRI.PTR definitions
29017 * [#2373](https://github.com/apache/incubator-nuttx/pull/2373) risc-v: Don't use non existent "save…
29018 * [#2423](https://github.com/apache/incubator-nuttx/pull/2423) xetnsa: Couple of Xtensa fixes
29019 * [#2448](https://github.com/apache/incubator-nuttx/pull/2448) arm: stm32/stm32h7: fix the configur…
29020 * [#2454](https://github.com/apache/incubator-nuttx/pull/2454) xtensa: esp32/esp32-core: Fix #ifdef…
29021 * [#2483](https://github.com/apache/incubator-nuttx/pull/2483) arm: stm32: convert all STM32G47X sp…
29022 * [#2519](https://github.com/apache/incubator-nuttx/pull/2519) arm: imxrt: replace clock_systimespe…
29023 * [#2536](https://github.com/apache/incubator-nuttx/pull/2536) xtensa: esp32: fixes enable int func…
29024 * [#2546](https://github.com/apache/incubator-nuttx/pull/2546) arm: imxrt: imxrt_usdhc.c: fixed no …
29025 …2551](https://github.com/apache/incubator-nuttx/pull/2551) arm: stm32h7x3xx_memorymap.h invalid ad…
29026 * [#2554](https://github.com/apache/incubator-nuttx/pull/2554) xtensa: Esp32 wifi fixes
29027 * [#2555](https://github.com/apache/incubator-nuttx/pull/2555) xtensa: esp32/esp32_spiflash.c: Writ…
29028 * [#2559](https://github.com/apache/incubator-nuttx/pull/2559) risc-v: Remove duplicated declaratio…
29029 * [#2560](https://github.com/apache/incubator-nuttx/pull/2560) risc-v: Move csr.h to common place
29030 * [#2568](https://github.com/apache/incubator-nuttx/pull/2568) risc-v: Move CSR register bit defini…
29031 * [#2569](https://github.com/apache/incubator-nuttx/pull/2569) risc-v: Reuse the common up_schedule…
29032 * [#2570](https://github.com/apache/incubator-nuttx/pull/2570) arm: stm32g4: Fix incorrect FLASH wa…
29033 * [#2573](https://github.com/apache/incubator-nuttx/pull/2573) xtensa: esp32: Bump NAME_MAX where C…
29034 …ps://github.com/apache/incubator-nuttx/pull/2584) xtensa: esp32_wifi_adapter.c: file mode for open…
29035 * [#2589](https://github.com/apache/incubator-nuttx/pull/2589) risc-v: fix redefined CSR_INSTRET
29036 * [#2612](https://github.com/apache/incubator-nuttx/pull/2612) arm: kinetis: S32K/Kinetis: Fix RTC …
29037 * [#2612](https://github.com/apache/incubator-nuttx/pull/2612) arm: S32K/Kinetis: Fix RTC settime p…
29038 * [#2647](https://github.com/apache/incubator-nuttx/pull/2647) xtensa: esp32: Fix ESP32 serial UART…
29039 * [#2666](https://github.com/apache/incubator-nuttx/pull/2666) xtensa: esp32: Fix ESP32 SPI3 slave …
29040 * [#2676](https://github.com/apache/incubator-nuttx/pull/2676) arm: stm32412: Fixes pinmap CAN1
29041 * [#2689](https://github.com/apache/incubator-nuttx/pull/2689) arm: tiva: Fix lm3s_ethernet.c with …
29042 * [#2700](https://github.com/apache/incubator-nuttx/pull/2700) arm: nRF52 various minor fixes
29043 * [#2708](https://github.com/apache/incubator-nuttx/pull/2708) xtensa: esp32: Fix ESP32 I2C driver …
29044 * [#2709](https://github.com/apache/incubator-nuttx/pull/2709) xtensa: esp32: Fix ESP32 SPI driver …
29045 …#2722](https://github.com/apache/incubator-nuttx/pull/2722) arm: stm32f412:Replaced Kludged pinmap…
29046 * [#2725](https://github.com/apache/incubator-nuttx/pull/2725) arm: nRF52: FIX wrong bitmask for DR…
29047 * [#2727](https://github.com/apache/incubator-nuttx/pull/2727) xtensa: esp32_free_cpuint: Fix an as…
29048 * [#2728](https://github.com/apache/incubator-nuttx/pull/2728) xtensa: esp32_dma_init: Fix a dubiou…
29049 * [#2731](https://github.com/apache/incubator-nuttx/pull/2731) xtensa: esp_allocateheap.c: Correct …
29050 * [#2752](https://github.com/apache/incubator-nuttx/pull/2752) xtensa: esp32/esp32_spiflash.c: Fix …
29051 * [#2755](https://github.com/apache/incubator-nuttx/pull/2755) xtensa: esp32: Fix compile errors wi…
29052 * [#2757](https://github.com/apache/incubator-nuttx/pull/2757) xtensa: esp32/esp32_wifi_adapter.c: …
29053 * [#2758](https://github.com/apache/incubator-nuttx/pull/2758) xtensa: Kconfig: Reduce the default …
29054 * [#2759](https://github.com/apache/incubator-nuttx/pull/2759) xtensa: esp32/psram: Fix missing con…
29055 * [#2761](https://github.com/apache/incubator-nuttx/pull/2761) risc-v: Remove unused and undefined …
29056 * [#2763](https://github.com/apache/incubator-nuttx/pull/2763) arm: imx6: Apply the latest imxrt/im…
29057 * [#2771](https://github.com/apache/incubator-nuttx/pull/2771) arm: imx6: Update imx6 enet
29058 * [#2772](https://github.com/apache/incubator-nuttx/pull/2771) arm: imx6 enet with TCP_WRITE_BUFFERS
29059 * [#2777](https://github.com/apache/incubator-nuttx/pull/2777) arm: imx6: Fix a compile error with …
29060 * [#2779](https://github.com/apache/incubator-nuttx/pull/2779) arm: samv7/sam_mcan.c: fix some mism…
29061 * [#2782](https://github.com/apache/incubator-nuttx/pull/2782) arm: nRF52 fixes
29062 * [#2788](https://github.com/apache/incubator-nuttx/pull/2788) risc-v: Don't declare riscv_addregio…
29063 * [#2791](https://github.com/apache/incubator-nuttx/pull/2791) arm: stm32f7/stm32_qspi.c: Fix warni…
29064 * [#2792](https://github.com/apache/incubator-nuttx/pull/2792) arm: [imxrt] Fix FlexCAN tx dropping…
29065 * [#2793](https://github.com/apache/incubator-nuttx/pull/2316) risc-v: Remove nx_start prototype fr…
29066 * [#2795](https://github.com/apache/incubator-nuttx/pull/2795) arm: stm32f412:Corrected Pin count
29067 * [#2796](https://github.com/apache/incubator-nuttx/pull/2796) xtensa: esp32: Fix cache issue detec…
29068 * [#2799](https://github.com/apache/incubator-nuttx/pull/2799) RV64: handle relocation type R_RISCV…
29069 * [#2805](https://github.com/apache/incubator-nuttx/pull/2805) arm: imxrt1060 iperf
29070 * [#2812](https://github.com/apache/incubator-nuttx/pull/2812) xtensa: esp32_spiflash.c: Fix prepro…
29071 * [#2813](https://github.com/apache/incubator-nuttx/pull/2813) xtensa: esp32: Add extern modifier t…
29072 * [#2815](https://github.com/apache/incubator-nuttx/pull/2815) riscv: Fix files names in headers th…
29073 * [#2832](https://github.com/apache/incubator-nuttx/pull/2832) xtensa: esp32: Fix the issue of WiFi…
29074 * [#2844](https://github.com/apache/incubator-nuttx/pull/2844) risc-v: LiteX: Make Arty-A7 example …
29075 * [#2867](https://github.com/apache/incubator-nuttx/pull/2867) arm: lpc17xx_40xx/lpc17_40_i2c.c: Pr…
29076 * [#2886](https://github.com/apache/incubator-nuttx/pull/2886) arm: pic32mz: Chip does not have ANS…
29077 * [#2889](https://github.com/apache/incubator-nuttx/pull/2889) arm: pic32mx7 cannot perform context…
29078 … [#2892](https://github.com/apache/incubator-nuttx/pull/2892) risc-v: esp32-c3: Don't reserve any …
29079 * [#2893](https://github.com/apache/incubator-nuttx/pull/2893) risc-v: esp32-c3: Build serial drive…
29080 * [#2903](https://github.com/apache/incubator-nuttx/pull/2903) xtensa: esp32: xtensa_user: Implemen…
29081 * [#2912](https://github.com/apache/incubator-nuttx/pull/2912) risc-v: esp32-c3: Fix CPU interrupts…
29082 * [#2917](https://github.com/apache/incubator-nuttx/pull/2917) arm: Add 'select ARM_HAVE_WFE_SEV' t…
29083 * [#2920](https://github.com/apache/incubator-nuttx/pull/2920) risc-v: esp32-c3: Configure clock an…
29084 * [#2923](https://github.com/apache/incubator-nuttx/pull/2923) ez80: fix several bugs in emac driver
29085 …/github.com/apache/incubator-nuttx/pull/2931) arm: kinetis: [FlexCAN] Fix TX drop #2792 and correc…
29086 …/github.com/apache/incubator-nuttx/pull/2931) arm: s32k1xx: [FlexCAN] Fix TX drop #2792 and correc…
29087 * [#2943](https://github.com/apache/incubator-nuttx/pull/2943) arm: stm32x7:lse ensure it is started
29088 * [#2951](https://github.com/apache/incubator-nuttx/pull/2951) arm: stm32_wwdg debug log formatting
29089 * [#2967](https://github.com/apache/incubator-nuttx/pull/2967) arm: STM32F7 lse static values direc…
29090 * [#2968](https://github.com/apache/incubator-nuttx/pull/2968) xtensa: esp32: Change I2C SCL defaul…
29091 * [#2972](https://github.com/apache/incubator-nuttx/pull/2972) risc-v: esp32-c3: Fix GPIO pin funct…
29092 * [#2976](https://github.com/apache/incubator-nuttx/pull/2976) xtensa: ESP32: Fix I2C Kconfig bring…
29093 * [#2977](https://github.com/apache/incubator-nuttx/pull/2977) xtensa: ESP32: Fix GPIO pin function…
29094 * [#2996](https://github.com/apache/incubator-nuttx/pull/2996) arm: stm32h747xi: Fix missing IO_CON…
29095 * [#3008](https://github.com/apache/incubator-nuttx/pull/3008) risc-v: esp32-c3: free cpu in case i…
29096 * [#3013](https://github.com/apache/incubator-nuttx/pull/3013) risc-v: bl602:fix bl602_flash_erase …
29097 * [#3034](https://github.com/apache/incubator-nuttx/pull/3034) arm: imx6: Fix an error message in i…
29098 * [#3051](https://github.com/apache/incubator-nuttx/pull/3051) risc-v: Internal functions should be…
29099 * [#3075](https://github.com/apache/incubator-nuttx/pull/3075) arm: Fix syscall number out of swi r…
29100 … [#3079](https://github.com/apache/incubator-nuttx/pull/3079) arm: kinetis: [FlexCAN] Correct rese…
29101 … [#3079](https://github.com/apache/incubator-nuttx/pull/3079) arm: s32k1xx: [FlexCAN] Correct rese…
29102 * [#3088](https://github.com/apache/incubator-nuttx/pull/3088) arm: samv7: Fix sam_putreg() paramet…
29103 * [#3092](https://github.com/apache/incubator-nuttx/pull/3092) xtensa: xtensa: esp32_allocateheap.c…
29104 * [#3116](https://github.com/apache/incubator-nuttx/pull/3116) arm: stm32l5: Enable SPI support and…
29105 …[#3119](https://github.com/apache/incubator-nuttx/pull/2976) xtensa: sp32: Fix buffer size word-al…
29106 * [#3125](https://github.com/apache/incubator-nuttx/pull/3125) risc-v: Internal functions should be…
29107 * [#3130](https://github.com/apache/incubator-nuttx/pull/3145) xtensa: esp32: Fix SPI polling mode …
29108 * [#3135](https://github.com/apache/incubator-nuttx/pull/3135) rv64:c906:colorize the idle stack ar…
29109 * [#3145](https://github.com/apache/incubator-nuttx/pull/3145) xtensa: esp32_part_ioctl: Return -EN…
29110 * [#3162](https://github.com/apache/incubator-nuttx/pull/3162) arm: STM32 USB OTGFSDEV: Fix handlin…
29111 * [#3167](https://github.com/apache/incubator-nuttx/pull/3167) arm: stm32h7:SPI Fix 16 bit SPI mode
29112 * [#3174](https://github.com/apache/incubator-nuttx/pull/3174) arm: Use macro defined swi range in …
29113 * [#3178](https://github.com/apache/incubator-nuttx/pull/3178) arm: tiva:cc13x0_adi3_refsys fix typo
29114 * [#3198](https://github.com/apache/incubator-nuttx/pull/3198) arm: Stm32h7 fix heap clobber
29115 * [#3199](https://github.com/apache/incubator-nuttx/pull/3199) xtensa: ESP32: Fix math for DMA buff…
29116 * [#3200](https://github.com/apache/incubator-nuttx/pull/3200) xtensa: esp32: Fix DMA burst mode be…
29117 * [#3219](https://github.com/apache/incubator-nuttx/pull/3219) risc-v: bl602: fix _heap_start not w…
29118 * [#3220](https://github.com/apache/incubator-nuttx/pull/3220) arm: Fix indexing for stm32h7 usbhos…
29119 * [#3248](https://github.com/apache/incubator-nuttx/pull/3248) xtensa: esp32: remove extra initial …
29120 * [#3283](https://github.com/apache/incubator-nuttx/pull/3283) rv64:add memory clobber to inline as…
29121 * [#3285](https://github.com/apache/incubator-nuttx/pull/3285) arm: Remove .cpu directive from asse…
29122 * [#3293](https://github.com/apache/incubator-nuttx/pull/3293) arm: armv6-m: Remove cpsid and cpsie…
29123 * [#3307](https://github.com/apache/incubator-nuttx/pull/3307) arm: Replace the hardcode syscall nu…
29124 * [#3310](https://github.com/apache/incubator-nuttx/pull/3310) arm: armv8-m: Merge ite instruction …
29125 * [#3311](https://github.com/apache/incubator-nuttx/pull/3311) arm: fix the potential corruption in…
29126 * [#3313](https://github.com/apache/incubator-nuttx/pull/3313) arm: Replace "b lr" or "mov pc, lr" …
29127 * [#3315](https://github.com/apache/incubator-nuttx/pull/3315) arm: Move setjmp/longjmp to libc/mac…
29128 * [#3326](https://github.com/apache/incubator-nuttx/pull/3326) arm: Update the old arm architecture…
29129 * [#3440](https://github.com/apache/incubator-nuttx/pull/3440) arm: Change all spsr_cxsf to spsr
29130 * [#3448](https://github.com/apache/incubator-nuttx/pull/3448) arm: armv7-a: Remove the special pro…
29131 * [#3451](https://github.com/apache/incubator-nuttx/pull/3451) arm: Remove g_irqtmp, g_undeftmp and…
29132 * [#3452](https://github.com/apache/incubator-nuttx/pull/3452) risc-v: esp32-c3: Refactors and fixe…
29133 * [#3457](https://github.com/apache/incubator-nuttx/pull/3457) arm: stm32h7: Actually use the AXI S…
29134 * [#3459](https://github.com/apache/incubator-nuttx/pull/3459) arm: stm32h7: Fixes build error in s…
29135 * [#3473](https://github.com/apache/incubator-nuttx/pull/3473) xtensa: esp32: move common XTAL and …
29136 * [#3486](https://github.com/apache/incubator-nuttx/pull/3486) xtensa: esp32: Improve SPI polling t…
29137 * [#3492](https://github.com/apache/incubator-nuttx/pull/3492) risc-v: riscv_initialize.c: Add teln…
29138 * [#2868](https://github.com/apache/incubator-nuttx/pull/2868) xtensa: Fix xtensa stack coloring
29143 * [#2129](https://github.com/apache/incubator-nuttx/pull/2129) add "nimble" config, to test nimBLE …
29144 …[#2130](https://github.com/apache/incubator-nuttx/pull/2130) rpproxy/rpserver: force use 'CONFIG_S…
29145 * [#2158](https://github.com/apache/incubator-nuttx/pull/2158) linux I2C bus support in sim
29146 * [#2164](https://github.com/apache/incubator-nuttx/pull/2164) add LVGL configuration which uses th…
29147 * [#2198](https://github.com/apache/incubator-nuttx/pull/2198) support LCD emulation over X11; corr…
29148 * [#2579](https://github.com/apache/incubator-nuttx/pull/2579) make it conditional with FS_FAT
29149 * [#2599](https://github.com/apache/incubator-nuttx/pull/2599) names: add writev/readv into name li…
29150 * [#2619](https://github.com/apache/incubator-nuttx/pull/2619) hci: reuse the reserved fields of hc…
29151 * [#2690](https://github.com/apache/incubator-nuttx/pull/2690) support sim vfork
29152 * [#2696](https://github.com/apache/incubator-nuttx/pull/2696) hcitty: add hcitty adapter
29153 * [#2720](https://github.com/apache/incubator-nuttx/pull/2720) board/sim: Support NuttX BLE stack t…
29154 * [#3093](https://github.com/apache/incubator-nuttx/pull/3093) add heap policy and asan logic to su…
29155 * [#3152](https://github.com/apache/incubator-nuttx/pull/3152) add dlsym to [nuttx-names.in](http:/…
29156 * [#3224](https://github.com/apache/incubator-nuttx/pull/3224) boards/sim: remove dsptest configura…
29157 * [#3231](https://github.com/apache/incubator-nuttx/pull/3231) add the simulated lower-half FOC dev…
29158 * [#3478](https://github.com/apache/incubator-nuttx/pull/3478) refactor signal handling
29161 * [#2109](https://github.com/apache/incubator-nuttx/pull/2109) Revert "arch/sim: Make the SIGUSR1 h…
29162 * [#2246](https://github.com/apache/incubator-nuttx/pull/2246) boards/sim/sim/sim/src/sim_touchscre…
29163 * [#2259](https://github.com/apache/incubator-nuttx/pull/2259) boards/sim: add atexit(2) into namin…
29164 * [#2441](https://github.com/apache/incubator-nuttx/pull/2441) sim: fix input handling and add simu…
29165 * [#2597](https://github.com/apache/incubator-nuttx/pull/2597) Revert "board/sim: Remove the too st…
29166 * [#3176](https://github.com/apache/incubator-nuttx/pull/3176) sim: fix signal deliver calling erro…
29167 * [#3205](https://github.com/apache/incubator-nuttx/pull/3205) sim: do not exit simulator on up_ass…
29172 * [#1955](https://github.com/apache/incubator-nuttx/pull/1955) Add documentation for note filters a…
29173 * [#1959](https://github.com/apache/incubator-nuttx/pull/1959) Documentation for the Timer Driver
29174 * [#2268](https://github.com/apache/incubator-nuttx/pull/2268) Documentation for Watchdog Timer Dri…
29175 * [#2334](https://github.com/apache/incubator-nuttx/pull/2334) [CONTRIBUTING.md](http://CONTRIBUTIN…
29176 * [#2408](https://github.com/apache/incubator-nuttx/pull/2408) Documentation: support versioned docs
29177 * [#2543](https://github.com/apache/incubator-nuttx/pull/2543) Documentation: how to use auto monit…
29178 * [#2818](https://github.com/apache/incubator-nuttx/pull/2818) Documentation: introduce hardware pl…
29179 * [#2819](https://github.com/apache/incubator-nuttx/pull/2819) Documentation: document nRF52832 Spa…
29180 * [#3022](https://github.com/apache/incubator-nuttx/pull/3022) hostfs: Document the backends and re…
29181 * [#3127](https://github.com/apache/incubator-nuttx/pull/3127) Documentation: add ESP32 and DevKitC…
29182 * [#3138](https://github.com/apache/incubator-nuttx/pull/3138) Addind CMake based C++ project examp…
29183 * [#3490](https://github.com/apache/incubator-nuttx/pull/3490) Documentation/esp32: Add supported p…
29186 * [#2021](https://github.com/apache/incubator-nuttx/pull/2021) Correct the links in Documentation f…
29187 * [#2024](https://github.com/apache/incubator-nuttx/pull/2024) Fix broken documentation links
29188 * [#2026](https://github.com/apache/incubator-nuttx/pull/2026) Documentation: Remove all tail space…
29189 * [#2027](https://github.com/apache/incubator-nuttx/pull/2027) Documentation: Reorganize some secti…
29190 * [#2031](https://github.com/apache/incubator-nuttx/pull/2031) Documentation/quickstart/debugging.r…
29191 * [#2045](https://github.com/apache/incubator-nuttx/pull/2045) Documentation: Misc fixups for broke…
29192 * [#2051](https://github.com/apache/incubator-nuttx/pull/2051) Documentation/quickstart/debugging: …
29193 * [#2106](https://github.com/apache/incubator-nuttx/pull/2106) documentation: change non-working URL
29194 * [#2329](https://github.com/apache/incubator-nuttx/pull/2329) Documentation/components/drivers/cha…
29195 * [#2362](https://github.com/apache/incubator-nuttx/pull/2362) Documentation improvements
29196 * [#2390](https://github.com/apache/incubator-nuttx/pull/2390) Documentation: improve debugging sec…
29197 * [#2485](https://github.com/apache/incubator-nuttx/pull/2485) Documentaiton: merge quickstart to g…
29198 * [#2563](https://github.com/apache/incubator-nuttx/pull/2563) update Documentation/components/driv…
29199 * [#3144](https://github.com/apache/incubator-nuttx/pull/3144) CI: remove linkcheck when building d…
29200 * [#3180](https://github.com/apache/incubator-nuttx/pull/3180) documentation: improve boardctl() do…
29201 * [#3194](https://github.com/apache/incubator-nuttx/pull/3194) Documentation: add syslog user API a…
29202 * [#3271](https://github.com/apache/incubator-nuttx/pull/3271) docs and comments: Update stale refe…
29203 * [#3470](https://github.com/apache/incubator-nuttx/pull/3470) Documentation: migrate ESP32 README …
29208 * [#1936](https://github.com/apache/incubator-nuttx/pull/1936) note: Add task trace support
29209 * [#1989](https://github.com/apache/incubator-nuttx/pull/1989) sensors: Support fxos8700cq motion I…
29210 * [#2091](https://github.com/apache/incubator-nuttx/pull/2091) usbdev: add Android Debug Bridge dri…
29211 * [#2166](https://github.com/apache/incubator-nuttx/pull/2166) lcd: Add LCD character driver: allow…
29212 * [#2216](https://github.com/apache/incubator-nuttx/pull/2216) rc: support infrared remote control
29213 * [#2282](https://github.com/apache/incubator-nuttx/pull/2282) audio: cxd56: add initial audio SRC …
29214 * [#2301](https://github.com/apache/incubator-nuttx/pull/2301) analog: support for MAX1161X family …
29215 * [#2429](https://github.com/apache/incubator-nuttx/pull/2429) audio: add simple wm8994 codec driver
29216 * [#2628](https://github.com/apache/incubator-nuttx/pull/2628) efuse: Add generic efuse driver for …
29217 * [#2736](https://github.com/apache/incubator-nuttx/pull/2736) console: Add generic support to LWL …
29218 * [#2829](https://github.com/apache/incubator-nuttx/pull/2829) sensor: add fakesensor driver
29219 * [#3230](https://github.com/apache/incubator-nuttx/pull/3230) motor: add generic upper-half driver…
29220 * [#3474](https://github.com/apache/incubator-nuttx/pull/3474) sensors: Adds driver for hyt271 sens…
29223 * [#2036](https://github.com/apache/incubator-nuttx/pull/2036) serial: break from read after closing
29224 * [#2039](https://github.com/apache/incubator-nuttx/pull/2039) sensors: add unified management for …
29225 * [#2070](https://github.com/apache/incubator-nuttx/pull/2070) bluetooth: support HCI/L2CAP sockets…
29226 * [#2139](https://github.com/apache/incubator-nuttx/pull/2139) lcd: Ssd1306 cleanup
29227 * [#2142](https://github.com/apache/incubator-nuttx/pull/2776) note: Add task name record for task …
29228 * [#2146](https://github.com/apache/incubator-nuttx/pull/2146) pipes: nx_pipe syscall takes three p…
29229 * [#2175](https://github.com/apache/incubator-nuttx/pull/2175) wireless: gs2200m: Check disassociat…
29230 * [#2188](https://github.com/apache/incubator-nuttx/pull/2200) lcd_dev: put header in correct locat…
29231 * [#2200](https://github.com/apache/incubator-nuttx/pull/2200) lcd: Minor fixes to ssd1306 i2c driv…
29232 * [#2201](https://github.com/apache/incubator-nuttx/pull/2512) wireless: gs2200m: Add function to g…
29233 * [#2208](https://github.com/apache/incubator-nuttx/pull/2208) lcd: add optional putarea()/getarea(…
29234 * [#2215](https://github.com/apache/incubator-nuttx/pull/2215) sensors: add new feature about senso…
29235 * [#2223](https://github.com/apache/incubator-nuttx/pull/2223) audio: cxd56: cleanup for the sprese…
29236 * [#2315](https://github.com/apache/incubator-nuttx/pull/2370) sensors: add common circular buffer …
29237 * [#2318](https://github.com/apache/incubator-nuttx/pull/2318) sensors: update l3gd20 sensor driver…
29238 * [#2343](https://github.com/apache/incubator-nuttx/pull/2343) serial: Prevent RX stall
29239 * [#2345](https://github.com/apache/incubator-nuttx/pull/2345) mtd/mtd_progmem.c: fix progmem_log2 …
29240 * [#2369](https://github.com/apache/incubator-nuttx/pull/2369) sensors: support custom types of sen…
29241 * [#2370](https://github.com/apache/incubator-nuttx/pull/2370) rc: fix bug about lirc_read
29242 …[#2383](https://github.com/apache/incubator-nuttx/pull/2383) USB: Do not try to print NULL format …
29243 * [#2398](https://github.com/apache/incubator-nuttx/pull/2398) rptun: fix rptun rpmsg_unregister_ca…
29244 * [#2445](https://github.com/apache/incubator-nuttx/pull/2445) audio: Make audio_null play at real …
29245 * [#2488](https://github.com/apache/incubator-nuttx/pull/2488) crypto/arc4random: rename getrandom …
29246 * [#2490](https://github.com/apache/incubator-nuttx/pull/3482) leds: ws2812: make frequency selecti…
29247 * [#2497](https://github.com/apache/incubator-nuttx/pull/2497) crypto/random_pool.c: fix getrandom(…
29248 * [#2508](https://github.com/apache/incubator-nuttx/pull/2508) leds/ws2812: optimize reset bytes
29249 * [#2512](https://github.com/apache/incubator-nuttx/pull/2488) wireless/bluetooth: change the tx th…
29250 * [#2564](https://github.com/apache/incubator-nuttx/pull/2564) audio: uninitialize usermq to NULL w…
29251 * [#2571](https://github.com/apache/incubator-nuttx/pull/2571) bluetooth: Fix bt_buff lifecycle
29252 * [#2607](https://github.com/apache/incubator-nuttx/pull/2607) wireless: bluetooth: minor fix to bl…
29253 * [#2609](https://github.com/apache/incubator-nuttx/pull/2609) wireless: bluetooth: fix minor issue…
29254 * [#2611](https://github.com/apache/incubator-nuttx/pull/2611) wireless/bluetooth: Fix vairous issu…
29255 * [#2617](https://github.com/apache/incubator-nuttx/pull/2617) serial: should include <signal.h> ex…
29256 * [#2621](https://github.com/apache/incubator-nuttx/pull/2621) syslog: Added formatted timestamps i…
29257 * [#2636](https://github.com/apache/incubator-nuttx/pull/2636) pipes: pty shouldn't call nx_pipe an…
29258 * [#2664](https://github.com/apache/incubator-nuttx/pull/2664) can: fix RTR ioctl and support timeo…
29259 * [#2691](https://github.com/apache/incubator-nuttx/pull/2383) wireless: bluetooth: add more hci ev…
29260 * [#2692](https://github.com/apache/incubator-nuttx/pull/2692) syslog: Prepend Process ID to syslog…
29261 * [#2697](https://github.com/apache/incubator-nuttx/pull/2697) syslog: Added printing of log priori…
29262 * [#2698](https://github.com/apache/incubator-nuttx/pull/2698) syslog: Added color output to syslog.
29263 * [#2704](https://github.com/apache/incubator-nuttx/pull/2704) wireless: bluetooth: minor fix for b…
29264 * [#2707](https://github.com/apache/incubator-nuttx/pull/2707) drivers: wireless: Fix ASSERT() in _…
29265 * [#2710](https://github.com/apache/incubator-nuttx/pull/2710) syslog: Re-arranged syslog fields.
29266 * [#2711](https://github.com/apache/incubator-nuttx/pull/2711) sensors: bmp280: minor fixes
29267 * [#2715](https://github.com/apache/incubator-nuttx/pull/2715) sensors: bmp280: convert to sensor i…
29268 * [#2738](https://github.com/apache/incubator-nuttx/pull/2738) wireless: gs2200m: Print error massa…
29269 * [#2747](https://github.com/apache/incubator-nuttx/pull/2747) wireless: gs2200m: Fix _read_data()
29270 * [#2775](https://github.com/apache/incubator-nuttx/pull/2775) mtd: w25qxxxjv.c : W25Q256's sector …
29271 * [#2776](https://github.com/apache/incubator-nuttx/pull/2776) net/encx24j600.c: Correct setting of…
29272 * [#2798](https://github.com/apache/incubator-nuttx/pull/2798) wireless: gs2200m: Change retry cond…
29273 * [#2801](https://github.com/apache/incubator-nuttx/pull/2801) mtd:w25qxxxjv.c: use different prote…
29274 * [#2850](https://github.com/apache/incubator-nuttx/pull/2850) audio: Introduce a driver-specific s…
29275 * [#2907](https://github.com/apache/incubator-nuttx/pull/2711) sensors: driver model update
29276 * [#2950](https://github.com/apache/incubator-nuttx/pull/2950) audio: pcm_decode: add RAW format su…
29277 * [#2961](https://github.com/apache/incubator-nuttx/pull/2961) syslog_rpmsg: fix system crash when …
29278 * [#2989](https://github.com/apache/incubator-nuttx/pull/2989) mmcsd: Fixes race condition in event…
29279 * [#3000](https://github.com/apache/incubator-nuttx/pull/3000) sensors: fakesensor support batch
29280 * [#3020](https://github.com/apache/incubator-nuttx/pull/3020) syslog: add option to prefix process…
29281 * [#3047](https://github.com/apache/incubator-nuttx/pull/3047) mmcsd: Stuck in 1-bit mode, Removed …
29282 * [#3050](https://github.com/apache/incubator-nuttx/pull/3050) syslog: Added support for multiple s…
29283 * [#3110](https://github.com/apache/incubator-nuttx/pull/3110) can: Add CAN FD flags to CAN header
29284 * [#3118](https://github.com/apache/incubator-nuttx/pull/3118) sensors: qencoder.c - Remove bad sni…
29285 * [#3163](https://github.com/apache/incubator-nuttx/pull/3163) USBDEV: RNDIS: Fix occasional discon…
29286 * [#3185](https://github.com/apache/incubator-nuttx/pull/3185) USBDEV RNDIS: Fix unaligned access c…
29287 * [#3195](https://github.com/apache/incubator-nuttx/pull/3195) serial: Don't comment out ws_[x|y]pi…
29288 * [#3201](https://github.com/apache/incubator-nuttx/pull/3201) timers: rtc/rpmsg: support server an…
29289 * [#3214](https://github.com/apache/incubator-nuttx/pull/3214) can: Fix TX ID bits 18-20 of mcp2515…
29290 * [#3215](https://github.com/apache/incubator-nuttx/pull/3215) syslog: Drop extra carriage return f…
29291 * [#3226](https://github.com/apache/incubator-nuttx/pull/3226) syslog: Added multi device support i…
29292 * [#3269](https://github.com/apache/incubator-nuttx/pull/3269) motor: Add support for motor debug m…
29293 * [#3453](https://github.com/apache/incubator-nuttx/pull/3453) syslog: Fix in syslog_intbuffer flus…
29294 * [#3454](https://github.com/apache/incubator-nuttx/pull/3454) syslog: Proper uninit of syslog_devi…
29295 * [#3475](https://github.com/apache/incubator-nuttx/pull/3214) input: Add INPUT_TOUCHSCREEN config
29296 * [#3482](https://github.com/apache/incubator-nuttx/pull/3482) input: Rename config from INPUT clas…
29301 * [#2054](https://github.com/apache/incubator-nuttx/pull/2054) configure.sh: update custom board co…
29302 * [#2463](https://github.com/apache/incubator-nuttx/pull/2463) boards: Added Teensy-4.x BSP
29303 …hub.com/apache/incubator-nuttx/pull/2503) Re-organise ESP32 boards and introduce two more(ESP-WROV…
29304 * [#2506](https://github.com/apache/incubator-nuttx/pull/2506) stm32: add stm32g43x support and nuc…
29305 * [#2838](https://github.com/apache/incubator-nuttx/pull/2838) Add initial support for ESP32-C3 and…
29306 * [#2877](https://github.com/apache/incubator-nuttx/pull/2877) Support for Raspberry Pi Pico
29307 … [#3129](https://github.com/apache/incubator-nuttx/pull/3129) boards/stm32: add initial support fo…
29308 * [#3217](https://github.com/apache/incubator-nuttx/pull/3217) board: Add support for nucleo-h743i2
29309 * [#3234](https://github.com/apache/incubator-nuttx/pull/3234) boards/stm32/common: add support for…
29316 * [#2764](https://github.com/apache/incubator-nuttx/pull/2764) boards: bl602evb flash and debug not…
29319 * [#3027](https://github.com/apache/incubator-nuttx/pull/3027) board:rv64:c906:support the ELF apps
29322 * [#1939](https://github.com/apache/incubator-nuttx/pull/1939) Add cxd56xx intstack for SMP
29323 * [#3016](https://github.com/apache/incubator-nuttx/pull/3016) spresense:rndis_smp
29324 * [#3024](https://github.com/apache/incubator-nuttx/pull/3024) Spesense CPU activity LED support
29325 * [#3084](https://github.com/apache/incubator-nuttx/pull/3084) cxd56_gnss: Add missing include head…
29326 * [#3085](https://github.com/apache/incubator-nuttx/pull/3085) cxd56_cpu1signal: Fix an issue that …
29329 …(https://github.com/apache/incubator-nuttx/pull/2507) boards/arm/stm32: add common and stm32f103-m…
29330 * [#2753](https://github.com/apache/incubator-nuttx/pull/2753) esp32: Enable renew for "wapi" confi…
29331 * [#2864](https://github.com/apache/incubator-nuttx/pull/2864) Add wapi_smp to test Wi-Fi in SMP mo…
29332 * [#2883](https://github.com/apache/incubator-nuttx/pull/2883) This commit implements I2C support f…
29333 * [#2888](https://github.com/apache/incubator-nuttx/pull/2888) This commit enables BMP180 suport fo…
29334 * [#2971](https://github.com/apache/incubator-nuttx/pull/2971) esp32: Add board config to support M…
29335 * [#3071](https://github.com/apache/incubator-nuttx/pull/3071) ESP32: Mount TMPFS on board bring up
29336 * [#3095](https://github.com/apache/incubator-nuttx/pull/3095) ESP32: Allow a BSS section to reside…
29337 * [#3117](https://github.com/apache/incubator-nuttx/pull/3117) xtensa/esp32: Use Polling instead of…
29338 * [#3139](https://github.com/apache/incubator-nuttx/pull/3139) xtensa/esp32: Support esp32 wireless…
29339 * [#3154](https://github.com/apache/incubator-nuttx/pull/3154) ESP32: Add Button support via BOOT b…
29340 * [#3164](https://github.com/apache/incubator-nuttx/pull/3164) xtensa/esp32: Adds oneshot timer dri…
29341 * [#3190](https://github.com/apache/incubator-nuttx/pull/3190) risc-v/esp32c3: Support ESP32-C3 wir…
29342 …](https://github.com/apache/incubator-nuttx/pull/3192) esp32-devkitc: Make nsh the entry-point of …
29343 * [#3211](https://github.com/apache/incubator-nuttx/pull/3211) esp32-devkitc: Add GPIO board support
29344 * [#3270](https://github.com/apache/incubator-nuttx/pull/3270) xtensa/esp32: Refactor register acce…
29345 * [#3303](https://github.com/apache/incubator-nuttx/pull/3303) esp32-devkitc: Add BMP180 sensor sup…
29348 …tps://github.com/apache/incubator-nuttx/pull/2879) risc-v/esp32c3: Enable stdio buffering for esp3…
29349 * [#2897](https://github.com/apache/incubator-nuttx/pull/2897) boards/esp32c3: Add tmpfs mounting w…
29350 * [#3074](https://github.com/apache/incubator-nuttx/pull/3074) esp32c3-devkit: Use nx_mount to avoi…
29351 * [#3261](https://github.com/apache/incubator-nuttx/pull/3261) esp32-c3: Add support to RNG periphe…
29354 * [#2997](https://github.com/apache/incubator-nuttx/pull/2997) boards: sabre-6quad: Add netnsh_smp …
29357 * [#2004](https://github.com/apache/incubator-nuttx/pull/2004) FlexCAN driver for i.MX RT1060 MCU
29358 * [#2526](https://github.com/apache/incubator-nuttx/pull/2526) boards/arm/imxrt/teensy-4.x: CDC-ACM…
29359 * [#2588](https://github.com/apache/incubator-nuttx/pull/2588) teensy-4.x Support for ST7789 contro…
29362 * [#1969](https://github.com/apache/incubator-nuttx/pull/1969) freedom-k64f: Init PWM only if enabl…
29363 * [#1977](https://github.com/apache/incubator-nuttx/pull/1977) freedom-k64f: Support raw binary fir…
29364 * [#1980](https://github.com/apache/incubator-nuttx/pull/1980) freedom-k64f: Add renew DHCP client …
29365 * [#1982](https://github.com/apache/incubator-nuttx/pull/1982) freedom-k64f: Add I2C initial support
29366 * [#1999](https://github.com/apache/incubator-nuttx/pull/1999) freedom-k64f: Register on board sens…
29367 * [#2020](https://github.com/apache/incubator-nuttx/pull/2020) freedom-k64f: Declare k64_i2cdev_ini…
29368 * [#2030](https://github.com/apache/incubator-nuttx/pull/2030) freedom-k64f: Fix k64_buttons.c
29369 * [#2037](https://github.com/apache/incubator-nuttx/pull/2037) freedom-k64f: Add demo configuration
29370 * [#2047](https://github.com/apache/incubator-nuttx/pull/2047) freedom-k64f: Add I2C to demo image
29371 * [#2847](https://github.com/apache/incubator-nuttx/pull/2847) board/freedom-k64f: Add usbdev suppo…
29374 * [#3239](https://github.com/apache/incubator-nuttx/pull/3239) board/arm/lpc17xx_40xx/mbed: Add use…
29377 * [#2706](https://github.com/apache/incubator-nuttx/pull/2706) board/nrf52-feather: Add simple i2c …
29380 * [#2884](https://github.com/apache/incubator-nuttx/pull/2884) Update raspi-pico
29381 …#2894](https://github.com/apache/incubator-nuttx/pull/2894) boards: raspberrypi-pico: Add nshsram …
29382 * [#3014](https://github.com/apache/incubator-nuttx/pull/3014) BMP180 sensor support to RP2040
29383 * [#3021](https://github.com/apache/incubator-nuttx/pull/3021) add INA219 support
29384 * [#3030](https://github.com/apache/incubator-nuttx/pull/3030) boards/raspberrypi-pico: Support ENC…
29385 * [#3067](https://github.com/apache/incubator-nuttx/pull/3067) boards/raspberrypi-pico: Pico Displa…
29388 …4](https://github.com/apache/incubator-nuttx/pull/2464) Added: MT29F2G Nand Flash block driver for…
29391 …ttps://github.com/apache/incubator-nuttx/pull/2433) Add 2.4 Inch TFT LCD Shield ILI9341 for nucleo…
29392 * [#2505](https://github.com/apache/incubator-nuttx/pull/2505) boards/arm/stm32/stm32f103-minimum: …
29393 * [#3053](https://github.com/apache/incubator-nuttx/pull/3053) Nucleo-F446RE: added support for CAN…
29394 … [#3064](https://github.com/apache/incubator-nuttx/pull/3064) boards: refactor for nucleo-f446re a…
29395 * [#3097](https://github.com/apache/incubator-nuttx/pull/3097) Add configuration for testing the Sp…
29396 * [#3222](https://github.com/apache/incubator-nuttx/pull/3222) stm32/stm32_serial: add support for …
29397 * [#3223](https://github.com/apache/incubator-nuttx/pull/3223) stm32/stm32_pwm: add interfaces to a…
29398 * [#3225](https://github.com/apache/incubator-nuttx/pull/3225) stm32/stm32_adc: various improvement…
29399 * [#3232](https://github.com/apache/incubator-nuttx/pull/3232) stm32/stm32_foc.c: add the lower-hal…
29402 * [#2553](https://github.com/apache/incubator-nuttx/pull/2553) boards: stm32f4discovery: Add adb co…
29403 * [#2699](https://github.com/apache/incubator-nuttx/pull/2699) boards/stm32f4discovery: Add a LWL b…
29404 * [#3052](https://github.com/apache/incubator-nuttx/pull/3052) Add support to LCD ST7789 on STM32F4…
29405 * [#3056](https://github.com/apache/incubator-nuttx/pull/3056) Add LCD1602 Backpack to common board
29408 * [#3218](https://github.com/apache/incubator-nuttx/pull/3218) Integration of pysimCoder with NUTTX
29411 * [#2353](https://github.com/apache/incubator-nuttx/pull/2353) Fix of the OTG FS HOST for nucleo-h7…
29414 * [#2009](https://github.com/apache/incubator-nuttx/pull/2842) Added STM32L432KC DAC support
29415 * [#2837](https://github.com/apache/incubator-nuttx/pull/2837) Add missing I2C3 support on nucleo-l…
29416 * [#2842](https://github.com/apache/incubator-nuttx/pull/2842) board: nucleo-l432kc: Add missing i2…
29419 * [#2684](https://github.com/apache/incubator-nuttx/pull/2684) boards: lm3s6965-ek: Add iperf to di…
29424 * [#2558](https://github.com/apache/incubator-nuttx/pull/2558) boards: Remove CINCPATH and CXXINCPA…
29427 * [#2079](https://github.com/apache/incubator-nuttx/pull/2079) Stm32 oled fixes pr
29428 * [#2360](https://github.com/apache/incubator-nuttx/pull/2360) stm32/stm32ldiscovery: modernize boa…
29429 * [#2500](https://github.com/apache/incubator-nuttx/pull/2500) stm32/common: devpath not long enoug…
29432 * [#2193](https://github.com/apache/incubator-nuttx/pull/2193) cxd56xx: Remove HOSTCC and HOSTCFLAG…
29435 * [#2127](https://github.com/apache/incubator-nuttx/pull/2127) esp32: Added Userled support
29436 * [#2802](https://github.com/apache/incubator-nuttx/pull/2802) ESP32: Refactor of POSTBUILD action
29437 * [#3263](https://github.com/apache/incubator-nuttx/pull/3263) esp32: Move the WLAN initialisation …
29438 * [#3288](https://github.com/apache/incubator-nuttx/pull/3288) esp32-wrover-kit: Don't use User GPI…
29439 * [#3442](https://github.com/apache/incubator-nuttx/pull/3442) esp32 boards: BUTTON_BOOT should use…
29444 * [#2598](https://github.com/apache/incubator-nuttx/pull/2598) fs/epoll: add asynchronous epoll con…
29445 * [#2841](https://github.com/apache/incubator-nuttx/pull/2841) fs: procfs meminfo improvements
29446 * [#2957](https://github.com/apache/incubator-nuttx/pull/2957) fs: mqueue: add poll support
29447 * [#3045](https://github.com/apache/incubator-nuttx/pull/3045) fs: Allocate file/socket dynamically
29448 * [#3212](https://github.com/apache/incubator-nuttx/pull/3212) fs/lfs: Update version to 2.4.0
29451 * [#2073](https://github.com/apache/incubator-nuttx/pull/2073) fs: epoll_create: modify return valu…
29452 * [#2260](https://github.com/apache/incubator-nuttx/pull/2260) fs: eventfd: remove the unique minor…
29453 * [#2317](https://github.com/apache/incubator-nuttx/pull/2317) fs: flashback to release all file de…
29454 * [#2339](https://github.com/apache/incubator-nuttx/pull/2339) Revert "fs/nxffs: Fix scan good bloc…
29455 * [#2532](https://github.com/apache/incubator-nuttx/pull/2532) fs/unionfs: remove excessive protect…
29456 * [#2540](https://github.com/apache/incubator-nuttx/pull/2540) fs: Skip call fs_checkfd if fd < 3 i…
29457 * [#2572](https://github.com/apache/incubator-nuttx/pull/2572) fs: spiffs fixes
29458 * [#2606](https://github.com/apache/incubator-nuttx/pull/2606) fs: Fix inode lock at umount2
29459 * [#2618](https://github.com/apache/incubator-nuttx/pull/2618) fs: remove INODE_IS_SPECIAL() use IN…
29460 * [#2638](https://github.com/apache/incubator-nuttx/pull/2618) fs: fs_dupfd2 should return OK if fd…
29461 * [#2639](https://github.com/apache/incubator-nuttx/pull/2639) fs: Let files_allocate return -EMFIL…
29462 * [#2640](https://github.com/apache/incubator-nuttx/pull/2640) fs: Remove _files_close and reuse fi…
29463 * [#2643](https://github.com/apache/incubator-nuttx/pull/2643) fs: Fix the race condition in file_d…
29464 * [#2648](https://github.com/apache/incubator-nuttx/pull/2648) fs: Remove the special hack for pty …
29465 * [#2660](https://github.com/apache/incubator-nuttx/pull/2660) fs: Reimplement file_open to not dep…
29466 * [#2661](https://github.com/apache/incubator-nuttx/pull/2661) fs: file_dup2 shouldn't hold the fil…
29467 * [#2662](https://github.com/apache/incubator-nuttx/pull/2662) fs/inode/fs_files.c: fix DEBUGASSERT…
29468 * [#2667](https://github.com/apache/incubator-nuttx/pull/2667) fs: Make nx_vxxx and file_vxxx as in…
29469 * [#2724](https://github.com/apache/incubator-nuttx/pull/2724) fs/tmpfs: Iterate the entry reversel…
29470 * [#2739](https://github.com/apache/incubator-nuttx/pull/2739) fs/readdir: Must reserve a byte for …
29471 * [#2810](https://github.com/apache/incubator-nuttx/pull/2810) fs: eventfd: Convert the indent unde…
29472 * [#2852](https://github.com/apache/incubator-nuttx/pull/2852) fs: Merge fs_poll into poll_fdsetup
29473 * [#2854](https://github.com/apache/incubator-nuttx/pull/2854) fs: Don't call _NX_SETERRNO in fopen…
29474 * [#2861](https://github.com/apache/incubator-nuttx/pull/2861) fs: change geometry sizes from size_…
29475 * [#2913](https://github.com/apache/incubator-nuttx/pull/2913) fs/lfs: lfs_file_sync() when littlef…
29476 * [#2956](https://github.com/apache/incubator-nuttx/pull/2956) fs/mount: fix mount cmd break out wh…
29477 * [#3042](https://github.com/apache/incubator-nuttx/pull/3042) fs: vfs : Do some adjustments for ep…
29478 * [#3060](https://github.com/apache/incubator-nuttx/pull/3060) fs: find_blockdriver: Don't ferr() o…
29479 * [#3069](https://github.com/apache/incubator-nuttx/pull/3069) fs/mmap: Clarify MAP_PRIVATE depende…
29480 * [#3070](https://github.com/apache/incubator-nuttx/pull/3070) fs/mmap: Return EACCES for incompati…
29481 * [#3105](https://github.com/apache/incubator-nuttx/pull/3105) fs/epoll: correct the return value o…
29482 * [#3137](https://github.com/apache/incubator-nuttx/pull/3137) fs/littlefs: Suppport the duplicatio…
29483 * [#3444](https://github.com/apache/incubator-nuttx/pull/3444) fs/romfs: fix open zero-byte file fa…
29484 * [#3491](https://github.com/apache/incubator-nuttx/pull/3491) fs: vfs: adjust the error code of wr…
29489 * [#2414](https://github.com/apache/incubator-nuttx/pull/2414) net: tcp: implement the fast retrans…
29490 * [#2415](https://github.com/apache/incubator-nuttx/pull/2415) net: gmp: add MULTICAST_TTL support
29491 * [#2417](https://github.com/apache/incubator-nuttx/pull/2417) net: wireless: add country code cont…
29492 * [#2548](https://github.com/apache/incubator-nuttx/pull/2548) net: tcp: optimize TCP handshake per…
29493 * [#2695](https://github.com/apache/incubator-nuttx/pull/2695) netpacket: if_addr: add interface ad…
29494 * [#2899](https://github.com/apache/incubator-nuttx/pull/2899) net: socket: Unify socket into file …
29495 * [#2964](https://github.com/apache/incubator-nuttx/pull/2964) net: socket_rpmsg: add socket rpmsg …
29496 * [#3025](https://github.com/apache/incubator-nuttx/pull/3025) net: Add sendmsg and recvmsg to sysc…
29497 * [#3081](https://github.com/apache/incubator-nuttx/pull/3081) tcp_send_buffered.c: improve tcp wri…
29498 * [#3113](https://github.com/apache/incubator-nuttx/pull/3113) net: usrsock: add send multi-element…
29499 * [#3257](https://github.com/apache/incubator-nuttx/pull/3257) net: tcp: support bind the same port…
29502 * [#1589](https://github.com/apache/incubator-nuttx/pull/1589) net: tcp: fix tcp socket close timeo…
29503 * [#2075](https://github.com/apache/incubator-nuttx/pull/2075) net: TCP-stack fix for stalled tcp s…
29504 * [#2121](https://github.com/apache/incubator-nuttx/pull/2121) net: devif: devif_callback.c: remove…
29505 * [#2257](https://github.com/apache/incubator-nuttx/pull/2257) net: callback: remove the assert che…
29506 * [#2332](https://github.com/apache/incubator-nuttx/pull/2332) net/tcp: Rectified keepalive fix
29507 * [#2412](https://github.com/apache/incubator-nuttx/pull/2413) net/icmp: add sanity check to avoid …
29508 * [#2413](https://github.com/apache/incubator-nuttx/pull/2413) net/tcp: correct the available iobs …
29509 * [#2416](https://github.com/apache/incubator-nuttx/pull/2416) net/tcp: fallback to unthrottle pool…
29510 * [#2421](https://github.com/apache/incubator-nuttx/pull/2421) net/neighbor/neighbor_ethernet_out.c…
29511 * [#2465](https://github.com/apache/incubator-nuttx/pull/2465) net/procfs: handle opendir("/proc/ne…
29512 * [#2466](https://github.com/apache/incubator-nuttx/pull/2466) net/igmp: add sanity check to handle…
29513 * [#2467](https://github.com/apache/incubator-nuttx/pull/2467) net/sockopt: Try usrsock further if …
29514 * [#2489](https://github.com/apache/incubator-nuttx/pull/2489) net: tcp: send the ACK in time after…
29515 * [#2688](https://github.com/apache/incubator-nuttx/pull/2688) net: Remove duplicate forward refere…
29516 * [#2774](https://github.com/apache/incubator-nuttx/pull/2774) net/ip: do not drop the udp packet f…
29517 * [#2811](https://github.com/apache/incubator-nuttx/pull/2811) net/local: Add an option to specify …
29518 * [#2869](https://github.com/apache/incubator-nuttx/pull/2869) netdb.h: Add NI_MAXHOST and NI_MAXSE…
29519 * [#2911](https://github.com/apache/incubator-nuttx/pull/2911) net: fix a few DP83848C and DP83825I…
29520 * [#2959](https://github.com/apache/incubator-nuttx/pull/2959) net: socket: move si_send/recv into …
29521 * [#2978](https://github.com/apache/incubator-nuttx/pull/2978) telnet: fix crash about telnet clien…
29522 * [#3037](https://github.com/apache/incubator-nuttx/pull/3037) Revert "net: tcp: Add DEBUGASSERT() …
29523 * [#3043](https://github.com/apache/incubator-nuttx/pull/3043) net: local: Remove local_send.c sinc…
29524 * [#3044](https://github.com/apache/incubator-nuttx/pull/3044) net: fix local_sendmsg return length
29525 * [#3062](https://github.com/apache/incubator-nuttx/pull/3062) net: tcp_sendfile.c: Remove an unuse…
29526 * [#3099](https://github.com/apache/incubator-nuttx/pull/3099) net: tcp: dup: do not start the tcp …
29527 * [#3100](https://github.com/apache/incubator-nuttx/pull/3100) net: tcp: correct the port byte order
29528 * [#3101](https://github.com/apache/incubator-nuttx/pull/3101) net: arp: add timeout to avoid infin…
29529 * [#3103](https://github.com/apache/incubator-nuttx/pull/3103) net: tcp: reset the connection ref c…
29530 * [#3104](https://github.com/apache/incubator-nuttx/pull/3104) net: dev: check the available addres…
29531 * [#3106](https://github.com/apache/incubator-nuttx/pull/3106) net: if: remove the macro expansion …
29532 * [#3221](https://github.com/apache/incubator-nuttx/pull/3221) net: tcp: tcp_send_buffered.c: Fix n…
29533 * [#3254](https://github.com/apache/incubator-nuttx/pull/3254) net: arp: Fix arp
29534 * [#3319](https://github.com/apache/incubator-nuttx/pull/3319) tcp_netpoll.c: Fix a performance iss…
29544 [PR-1890](https://github.com/apache/incubator-nuttx/pull/1890)
29545 (commit [2caf3a69e3d60ec550980f7ba897c732e7a39df7](https://github.com/apache/incubator-nuttx/pull/1…
29546 attempts to speed up compilation time for concurrent builds by changing
29556 …RCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS) -pipe
29557 …ARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS) -pipe
29559 AFLAGS = $(CFLAGS) -D__ASSEMBLY__
29565 …RCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS) -pipe
29566 …ARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS) -pipe
29568 AFLAGS := $(CFLAGS) -D__ASSEMBLY__
29573 [PR-2192](https://github.com/apache/incubator-nuttx/pull/2192)
29574 (commit [9208176f600d0d04446531909bf05710716a5ee4](https://github.com/apache/incubator-nuttx/commit…
29576 `tools/Config.mk`, so it is no longer necessary to define it in each board's
29585 ARCHDEFINES = -D__NuttX__
29588 Or remove -D__NuttX__ from lines like this:
29591 CXXFLAGS += $(ARCHDEFINES) $(EXTRAFLAGS) -pipe -std=c++11 -D__NuttX__
29594 NuttX-10.2.0 Release Notes
29601 …* [#3708](https://github.com/apache/incubator-nuttx/pull/#3708) openamp: Update to 2020.10.0 offic…
29602 * [#3709](https://github.com/apache/incubator-nuttx/pull/#3709) Update libcxx to 12.0.0 release
29603 …3674](https://github.com/apache/incubator-nuttx/pull/#3674) libc/termios: Implement TCSADRAIN and …
29604 * [#4595](https://github.com/apache/incubator-nuttx/pull/#4595) libc/misc: add lib_glob
29605 * [#4594](https://github.com/apache/incubator-nuttx/pull/#4594) libc/string: add lib_strchrnul
29606 …* [#3672](https://github.com/apache/incubator-nuttx/pull/#3672) include/spawn.h: Add POSIX_SPAWN_S…
29607 …* [#4265](https://github.com/apache/incubator-nuttx/pull/#4265) libc: Support message catalog func…
29608 …* [#3102](https://github.com/apache/incubator-nuttx/pull/#3102) mm/iob: add iob_free_queue() inter…
29609 …* [#3893](https://github.com/apache/incubator-nuttx/pull/#3893) libs/libc/netdb: add dns clear int…
29610 …* [#3959](https://github.com/apache/incubator-nuttx/pull/#3959) libc/time: Implement timegm functi…
29611 * [#3963](https://github.com/apache/incubator-nuttx/pull/#3963) libc/sched: Implement nice API
29612 …* [#3977](https://github.com/apache/incubator-nuttx/pull/#3977) sched: Add kthread_create_with_sta…
29613 …* [#4016](https://github.com/apache/incubator-nuttx/pull/#4016) Add heap & stack check to idle thr…
29614 …* [#4114](https://github.com/apache/incubator-nuttx/pull/#4114) libc/math: Add fmax and fmin funct…
29615 * [#4130](https://github.com/apache/incubator-nuttx/pull/#4130) sys/poll: add POLLRDHUP definition
29616 …* [#4262](https://github.com/apache/incubator-nuttx/pull/#4262) libc: Add the empty nl_langinfo im…
29617 * [#4272](https://github.com/apache/incubator-nuttx/pull/#4272) libc: Implement gettext function
29618 …* [#4432](https://github.com/apache/incubator-nuttx/pull/#4432) libc:machine: add atomic_load/stor…
29619 …* [#4438](https://github.com/apache/incubator-nuttx/pull/#4438) uClibcxx: add weak attribute for n…
29620 * [#3681](https://github.com/apache/incubator-nuttx/pull/#3681) libc: Implement openpty function
29621 …* [#4363](https://github.com/apache/incubator-nuttx/pull/#4363) sched/backtrace: add sched_backtra…
29622 …* [#4374](https://github.com/apache/incubator-nuttx/pull/#4374) libxx: add new low level c++ stand…
29623 …* [#4425](https://github.com/apache/incubator-nuttx/pull/#4425) libc: add common machine atomic op…
29624 …* [#3687](https://github.com/apache/incubator-nuttx/pull/#3687) libc/pwd: Add NSS_BUFLEN_PASSWD ma…
29625 …* [#3970](https://github.com/apache/incubator-nuttx/pull/#3970) libc: Implement fesetround & feget…
29626 …* [#4104](https://github.com/apache/incubator-nuttx/pull/#4104) sched/clock: add nsec range check …
29627 …* [#4518](https://github.com/apache/incubator-nuttx/pull/#4518) getaddrinfo: support AF_LOCAL and …
29628 * [#4595](https://github.com/apache/incubator-nuttx/pull/#4595) libc/misc: add lib_glob
29629 …* [#3985](https://github.com/apache/incubator-nuttx/pull/#3985) mmap: Implement the minial but rea…
29630 …* [#4065](https://github.com/apache/incubator-nuttx/pull/#4065) mm: Add kmm_malloc_size and mm_mal…
29631 * [#4096](https://github.com/apache/incubator-nuttx/pull/#4096) mm: Simplify the semaphore handling
29632 * [#4100](https://github.com/apache/incubator-nuttx/pull/#4100) Implement utime and futimes
29635 …* [#4615](https://github.com/apache/incubator-nuttx/pull/#4615) sched/signal: Correct kill with ca…
29636 …* [#4619](https://github.com/apache/incubator-nuttx/pull/#4619) sched: Fix CPU affinity issues in …
29637 …* [#3626](https://github.com/apache/incubator-nuttx/pull/#3626) libc: Move pthread stuff to usersp…
29638 …73](https://github.com/apache/incubator-nuttx/pull/#3673) libc/pty: Make ptsname[_r] support PSEUD…
29639 …* [#4599](https://github.com/apache/incubator-nuttx/pull/#4599) sched:tcb_s:rearrange sched_priori…
29640 * [#3747](https://github.com/apache/incubator-nuttx/pull/#3747) mm:initialize ensure alignment.
29641 …* [#3962](https://github.com/apache/incubator-nuttx/pull/#3962) sched/task/task_spawn.c: initializ…
29642 …* [#3916](https://github.com/apache/incubator-nuttx/pull/#3916) sched/posix_spawn: Don't insert na…
29643 …* [#3858](https://github.com/apache/incubator-nuttx/pull/#3858) tls: Move pthread key destructor t…
29644 …* [#3719](https://github.com/apache/incubator-nuttx/pull/#3719) group/group_signal: cancel dispatc…
29645 …* [#4453](https://github.com/apache/incubator-nuttx/pull/#4453) libs/libxx: Enforce RTTI for build…
29646 …* [#4450](https://github.com/apache/incubator-nuttx/pull/#4450) libxx:uClibc++: disable new_handle…
29647 …* [#4456](https://github.com/apache/incubator-nuttx/pull/#4456) libc/gettext: Initialize path fiel…
29648 …[#4466](https://github.com/apache/incubator-nuttx/pull/#4466) sched/wdog/wd_start.c: prevent acces…
29649 …* [#4499](https://github.com/apache/incubator-nuttx/pull/#4499) uClibc++:remove typeinfo.cpp that …
29650 …* [#3698](https://github.com/apache/incubator-nuttx/pull/#3698) sched/task: Simplify the syscall h…
29651 …* [#3813](https://github.com/apache/incubator-nuttx/pull/#3813) syscall/syscall.csv: Correct order…
29652 …* [#4020](https://github.com/apache/incubator-nuttx/pull/#4020) SMP should depends on ARCH_INTERRU…
29653 …* [#3957](https://github.com/apache/incubator-nuttx/pull/#3957) sched/wdog: Remove flags field fro…
29654 …* [#3967](https://github.com/apache/incubator-nuttx/pull/#3967) libc/dirname: Handle the consecuti…
29655 …* [#4018](https://github.com/apache/incubator-nuttx/pull/#4018) libs/libc/spawn: fix posix_spawn_f…
29656 …* [#4009](https://github.com/apache/incubator-nuttx/pull/#4009) Move aligned_alloc, posix_memalign…
29657 …* [#4021](https://github.com/apache/incubator-nuttx/pull/#4021) sched/waitpid: handle waitpid wait…
29658 …* [#4026](https://github.com/apache/incubator-nuttx/pull/#4026) sched/idle: disable sched when idl…
29659 …* [#4035](https://github.com/apache/incubator-nuttx/pull/#4035) work_queue: schedule the work queu…
29660 …* [#4048](https://github.com/apache/incubator-nuttx/pull/#4048) libc: Move pthread_key_destructor …
29661 …* [#4057](https://github.com/apache/incubator-nuttx/pull/#4057) libs: libnx: nxfonts: Fix prefix o…
29662 …* [#4109](https://github.com/apache/incubator-nuttx/pull/#4109) libc: Implement ttyname and ttynam…
29663 …* [#4115](https://github.com/apache/incubator-nuttx/pull/#4115) libc/math: Fix calculation error o…
29664 * [#4124](https://github.com/apache/incubator-nuttx/pull/#4124) add #undef for some libc function
29665 …* [#4125](https://github.com/apache/incubator-nuttx/pull/#4125) libc/sysconf: Add MONOTONIC_CLOCK …
29666 …* [#4127](https://github.com/apache/incubator-nuttx/pull/#4127) libc: Increase the function of crc…
29667 …* [#4160](https://github.com/apache/incubator-nuttx/pull/#4160) group/child_status: Dynamically ex…
29668 …* [#4183](https://github.com/apache/incubator-nuttx/pull/#4183) sched/task: Fix wrong return value…
29669 …* [#4226](https://github.com/apache/incubator-nuttx/pull/#4226) syslog: reslove crash because vmov…
29670 …* [#4246](https://github.com/apache/incubator-nuttx/pull/#4246) libc/pthread_barrierattr_destory.c…
29671 …4270](https://github.com/apache/incubator-nuttx/pull/#4270) tzset: avoid taking semaphore in inter…
29672 …* [#4413](https://github.com/apache/incubator-nuttx/pull/#4413) sched/wdog: fix switch_context cau…
29673 …* [#3703](https://github.com/apache/incubator-nuttx/pull/#3703) sched/spawn: Support the stack add…
29674 …* [#4287](https://github.com/apache/incubator-nuttx/pull/#4287) signal: Allow SIG_EVTHREAD selecta…
29675 …* [#4296](https://github.com/apache/incubator-nuttx/pull/#4296) sched: Fix crash on early syslog m…
29676 …* [#4368](https://github.com/apache/incubator-nuttx/pull/#4368) libs/libxx/uClibc++.defs: Download…
29677 …* [#4369](https://github.com/apache/incubator-nuttx/pull/#4369) libs/libxx: Download C++ libraries…
29678 …* [#4382](https://github.com/apache/incubator-nuttx/pull/#4382) sched/backtrace: simplify the assi…
29679 …* [#4377](https://github.com/apache/incubator-nuttx/pull/#4377) task_spawn: release g_spawn_parmse…
29680 * [#4068](https://github.com/apache/incubator-nuttx/pull/#4068) mm: Remove mm_heap_impl_s struct
29681 …* [#4247](https://github.com/apache/incubator-nuttx/pull/#4247) Redirect _l function to non-locale…
29682 * [#4380](https://github.com/apache/incubator-nuttx/pull/#4380) som byteorder modification
29683 …* [#4283](https://github.com/apache/incubator-nuttx/pull/#4283) libc/gettext: Change g_domain to a…
29684 …* [#4512](https://github.com/apache/incubator-nuttx/pull/#4512) lib_vsprintf: Add %pV format suppo…
29685 …* [#4513](https://github.com/apache/incubator-nuttx/pull/#4513) libc/rexec/rexec_af: support remot…
29686 …* [#4516](https://github.com/apache/incubator-nuttx/pull/#4516) lib_fread: return the number of by…
29687 * [#4520](https://github.com/apache/incubator-nuttx/pull/#4520) debug: allow customize EXTRA_FMT
29688 …* [#3978](https://github.com/apache/incubator-nuttx/pull/#3978) Decouple the initialization of the…
29689 …* [#4029](https://github.com/apache/incubator-nuttx/pull/#4029) mm: fix memory corruption when loo…
29690 …* [#4055](https://github.com/apache/incubator-nuttx/pull/#4055) mm: Move the real implementation o…
29691 …* [#4030](https://github.com/apache/incubator-nuttx/pull/#4030) Fix procfs memory corruption when …
29692 * [#4043](https://github.com/apache/incubator-nuttx/pull/#4043) select: fix asan report error
29693 …* [#4519](https://github.com/apache/incubator-nuttx/pull/#4519) errno: use staic errno to replace …
29694 * [#3992](https://github.com/apache/incubator-nuttx/pull/#3992) Refine tls_info_s and task_info_s
29695 * [#4019](https://github.com/apache/incubator-nuttx/pull/#4019) Fix asan report error
29696 …* [#4053](https://github.com/apache/incubator-nuttx/pull/#4053) mm: Move procfs_register_meminfo i…
29697 …* [#4054](https://github.com/apache/incubator-nuttx/pull/#4054) mm: Call memalign in malloc if ARC…
29698 …* [#4454](https://github.com/apache/incubator-nuttx/pull/#4454) user/trap: Set MQ_MAXMSGSIZE to 64…
29699 …* [#3725](https://github.com/apache/incubator-nuttx/pull/#3725) cmd/free: add nused/nfree field in…
29700 …* [#3753](https://github.com/apache/incubator-nuttx/pull/#3753) libelf: fix "nsh: nsh_session: rea…
29701 …* [#3767](https://github.com/apache/incubator-nuttx/pull/#3767) binfmt: Move argv copy into exec_m…
29702 …* [#3764](https://github.com/apache/incubator-nuttx/pull/#3764) binfmt: Rename dump_module to binf…
29703 …* [#4064](https://github.com/apache/incubator-nuttx/pull/#4064) binfmt: Replace all nx_ API with f…
29704 …* [#3928](https://github.com/apache/incubator-nuttx/pull/#3928) binfmt: Handle argv/argv[0] == NUL…
29705 …* [#3867](https://github.com/apache/incubator-nuttx/pull/#3867) TLS: Correct handling of returned …
29706 …* [#4185](https://github.com/apache/incubator-nuttx/pull/#4185) iob_trimhead: fix an integer trunc…
29707 * [#4117](https://github.com/apache/incubator-nuttx/pull/#4117) Dynamically extend Pidhash table
29708 * [#4186](https://github.com/apache/incubator-nuttx/pull/#4186) libc: Implement times function
29709 …* [#3908](https://github.com/apache/incubator-nuttx/pull/#3908) crypto/random_pool.c: Correct inde…
29710 * [#3817](https://github.com/apache/incubator-nuttx/pull/#3817) audio: various fixes
29715 …* [#4525](https://github.com/apache/incubator-nuttx/pull/#4525) mkromfsimg: Add optional rcS file …
29716 …* [#4491](https://github.com/apache/incubator-nuttx/pull/#4491) checkpatch.sh: add check gerrit Ch…
29717 …* [#3716](https://github.com/apache/incubator-nuttx/pull/#3716) tools: Add a bash completion scrip…
29718 …* [#3819](https://github.com/apache/incubator-nuttx/pull/#3819) docker/linux: Add ESP32-S2 toolcha…
29719 …* [#4203](https://github.com/apache/incubator-nuttx/pull/#4203) tools: Add armv7-a support to nutt…
29720 * [#3705](https://github.com/apache/incubator-nuttx/pull/#3705) docker: add ninja-build
29723 …* [#4418](https://github.com/apache/incubator-nuttx/pull/#4418) compiler.h: add __builtin_offsetof…
29724 …* [#3815](https://github.com/apache/incubator-nuttx/pull/#3815) tools/mksyscall: Fix build break o…
29725 …* [#4461](https://github.com/apache/incubator-nuttx/pull/#4461) tools/ci: Minor improvements to CI…
29726 …2](https://github.com/apache/incubator-nuttx/pull/#4492) tools/nxstyle: Fix the check tool incorre…
29727 …](https://github.com/apache/incubator-nuttx/pull/#3710) tools/ci: Rename sim0x.dat to sim-0x.dat t…
29728 …* [#4455](https://github.com/apache/incubator-nuttx/pull/#4455) makefile: let clean_context in dis…
29729 …* [#4423](https://github.com/apache/incubator-nuttx/pull/#4423) board: Enable CONFIG_LIBCXXABI whe…
29730 * [#4196](https://github.com/apache/incubator-nuttx/pull/#4196) tools: Fix nuttx-gdbinit
29739 …* [#4252](https://github.com/apache/incubator-nuttx/pull/#4252) pic32mz: added support for PIC32MZ…
29744 …[#4522](https://github.com/apache/incubator-nuttx/pull/#4522) arch/arm: Add ARCH_CORTEXM55 Kconfig…
29745 …* [#3759](https://github.com/apache/incubator-nuttx/pull/#3759) arm/v7-a/fpu: add VFP-v3 D32 suppo…
29746 …* [#4536](https://github.com/apache/incubator-nuttx/pull/#4536) arch/arm: correct the function nam…
29747 …* [#4410](https://github.com/apache/incubator-nuttx/pull/#4410) arch/arm/assert: enhance the asser…
29748 …* [#4409](https://github.com/apache/incubator-nuttx/pull/#4409) arch/arm/cortex-m: add up_backtrac…
29749 …* [#4405](https://github.com/apache/incubator-nuttx/pull/#4405) arch/armv7: add up_backtrace suppo…
29750 …* [#4385](https://github.com/apache/incubator-nuttx/pull/#4385) arch/armv8-m: Update per the lates…
29751 …* [#4354](https://github.com/apache/incubator-nuttx/pull/#4354) arch/arm: correct the frame pointe…
29752 * [#4205](https://github.com/apache/incubator-nuttx/pull/#4205) arm: add up_secure_irq support
29753 …* [#4176](https://github.com/apache/incubator-nuttx/pull/#4176) ARM: fix CPSR corruption after exc…
29754 …* [#4094](https://github.com/apache/incubator-nuttx/pull/#4094) arch/armv7-a: Remove the special S…
29755 … [#4451](https://github.com/apache/incubator-nuttx/pull/#4451) arch: Replace ar, nm and ld with gc…
29756 * [#4343](https://github.com/apache/incubator-nuttx/pull/#4343) arch/armv8-m: Add SAU support
29757 …* [#4341](https://github.com/apache/incubator-nuttx/pull/#4341) arch/arm: Add NVIC_FPCCR_XXX macro…
29758 … [#4279](https://github.com/apache/incubator-nuttx/pull/#4279) arch/cortex-m: replace arm_switchco…
29759 * [#4106](https://github.com/apache/incubator-nuttx/pull/#4106) arm/setjmp.h:add c++ support
29760 …* [#4013](https://github.com/apache/incubator-nuttx/pull/#4013) arm: fix enable interrupt too earl…
29761 …* [#4483](https://github.com/apache/incubator-nuttx/pull/#4483) Fix compilation of arm protected b…
29762 * [#3879](https://github.com/apache/incubator-nuttx/pull/#3879) arch: Rename xxx_getsp to up_getsp
29763 …* [#4227](https://github.com/apache/incubator-nuttx/pull/#4227) pwm: add option to break the loops…
29764 …* [#4261](https://github.com/apache/incubator-nuttx/pull/#4261) EXC_SECURE and SECURE_STACK just c…
29767 …* [#4557](https://github.com/apache/incubator-nuttx/pull/#4557) arch: cxd56xx: Replace the critica…
29768 …* [#3743](https://github.com/apache/incubator-nuttx/pull/#3743) arch: arm: cxd56xx: Update cxd56xx…
29769 * [#3845](https://github.com/apache/incubator-nuttx/pull/#3845) Fix spresense with elf
29772 * [#4072](https://github.com/apache/incubator-nuttx/pull/#4072) lpc17xx: Added WDT driver.
29773 …* [#4316](https://github.com/apache/incubator-nuttx/pull/#4316) lpc17_40: Fixed I2C port sanity ch…
29774 …* [#4148](https://github.com/apache/incubator-nuttx/pull/#4148) lpc17_40: style fix in WDT definit…
29775 * [#4107](https://github.com/apache/incubator-nuttx/pull/#4107) lpc17_40: Fixed progmem driver.
29778 …* [#3761](https://github.com/apache/incubator-nuttx/pull/#3761) ET-STM32 Stamp: An STM32F103RET6 t…
29779 …* [#4350](https://github.com/apache/incubator-nuttx/pull/#4350) arch/arm/src/stm32l4/Kconfig: add …
29780 …* [#4310](https://github.com/apache/incubator-nuttx/pull/#4310) arch/stm32: improvements for qenco…
29781 * [#3752](https://github.com/apache/incubator-nuttx/pull/#3752) Use inttypes stm32fx i2c
29782 * [#4090](https://github.com/apache/incubator-nuttx/pull/#4090) STM32G43XX Analog Comparator
29783 …* [#3942](https://github.com/apache/incubator-nuttx/pull/#3942) Changed the STM32 Analog Comparato…
29784 …* [#3729](https://github.com/apache/incubator-nuttx/pull/#3729) stm32 timers: Prefer GTIM macros a…
29785 * [#4163](https://github.com/apache/incubator-nuttx/pull/#4163) Files for pysimCoder
29786 …* [#4151](https://github.com/apache/incubator-nuttx/pull/#4151) Change DAC driver to support STM32…
29789 …://github.com/apache/incubator-nuttx/pull/#3668) arch/arm/src/stm32l4/hardware/stm32l4xrxx: pinmap…
29790 …* [#4468](https://github.com/apache/incubator-nuttx/pull/#4468) arch/arm/src/stm32l4: fix STM32L4+…
29791 …* [#4501](https://github.com/apache/incubator-nuttx/pull/#4501) arch/arm/src/stm32l4: add control …
29792 …ps://github.com/apache/incubator-nuttx/pull/#4469) arch/arm/src/stm32l4/stm32l4_flash.c: fix FLASH…
29797 …* [#3850](https://github.com/apache/incubator-nuttx/pull/#3850) UCANS32K146 add support for B revi…
29798 * [#4493](https://github.com/apache/incubator-nuttx/pull/#4493) Fix error in s32k118_pinmux.h
29799 …* [#3795](https://github.com/apache/incubator-nuttx/pull/#3795) S32K1XX LSPI Double word up to 64 …
29802 …* [#3777](https://github.com/apache/incubator-nuttx/pull/#3777) arch: imx6: Add termios support to…
29805 …* [#3988](https://github.com/apache/incubator-nuttx/pull/#3988) arch/arm/src/imxrt/imxrt_flexpwm.c…
29806 …* [#4431](https://github.com/apache/incubator-nuttx/pull/#4431) i.MX RT: Changes to FlexCAN driver…
29807 …* [#4285](https://github.com/apache/incubator-nuttx/pull/#4285) arch/arm/src/imxrt/imxrt_flexpwm.c…
29808 …* [#4138](https://github.com/apache/incubator-nuttx/pull/#4138) i.MX RT: added support for Tickles…
29811 * [#4049](https://github.com/apache/incubator-nuttx/pull/#4049) Raspipico smp
29812 …* [#4251](https://github.com/apache/incubator-nuttx/pull/#4251) raspberrypi-pico: add support for …
29813 …* [#4002](https://github.com/apache/incubator-nuttx/pull/#4002) Kinetis Replace DMA with a proper …
29816 * [#4076](https://github.com/apache/incubator-nuttx/pull/#4076) AmebaZ2: Add soc src code
29821 …* [#4331](https://github.com/apache/incubator-nuttx/pull/#4331) arch/arm/stm32h7: dma and serial: …
29822 …* [#4441](https://github.com/apache/incubator-nuttx/pull/#4441) arch/arm/stm32f7/stm32_irq: Fix fo…
29823 …* [#4098](https://github.com/apache/incubator-nuttx/pull/#4098) stm32h7 Ethernet add yield and tim…
29824 …* [#3730](https://github.com/apache/incubator-nuttx/pull/#3730) stm32h7 rcc: Sync h7x7xx and h7x3x…
29825 …* [#3892](https://github.com/apache/incubator-nuttx/pull/#3892) arch/arm/src/stm32h7: qspi use ind…
29826 …* [#3728](https://github.com/apache/incubator-nuttx/pull/#3728) stm32f7: Remove references to BOAR…
29827 …(https://github.com/apache/incubator-nuttx/pull/#3731) stm32/stm32f7 tickless: Fix up_timer_getmas…
29828 * [#3976](https://github.com/apache/incubator-nuttx/pull/#3976) STM32F7 SDMMC fixes
29829 …* [#3924](https://github.com/apache/incubator-nuttx/pull/#3924) stm32h7 fix for adc to handle over…
29832 …* [#4230](https://github.com/apache/incubator-nuttx/pull/#4230) renesas/rx65n: add long type for a…
29833 …* [#3989](https://github.com/apache/incubator-nuttx/pull/#3989) Renesas/RX added setjmp and placeh…
29835 #### Risc-V
29836 …* [#3770](https://github.com/apache/incubator-nuttx/pull/#3770) Add support for PolarFire SoC and …
29837 …* [#3997](https://github.com/apache/incubator-nuttx/pull/#3997) risc-v/bl602: update wifi firmware…
29838 …* [#4381](https://github.com/apache/incubator-nuttx/pull/#4381) arch/riscv/assert: enhance the ass…
29839 …* [#4367](https://github.com/apache/incubator-nuttx/pull/#4367) riscv/backtrace: add up_backtrace …
29840 …* [#4365](https://github.com/apache/incubator-nuttx/pull/#4365) riscv/common: add CURRENT_REGS dec…
29841 …* [#4342](https://github.com/apache/incubator-nuttx/pull/#4342) riscv/bl602: Fix that AP cannot be…
29842 …* [#4335](https://github.com/apache/incubator-nuttx/pull/#4335) arch/bl602：Add bl602 os adapter la…
29843 …* [#4145](https://github.com/apache/incubator-nuttx/pull/#4145) risc-v/bl602: update wifi firmware…
29844 …* [#3849](https://github.com/apache/incubator-nuttx/pull/#3849) risc-v/mpfs: irq fixes, more regis…
29845 …* [#3984](https://github.com/apache/incubator-nuttx/pull/#3984) risc-v/bl602: Support AP and STA a…
29846 …* [#3913](https://github.com/apache/incubator-nuttx/pull/#3913) arch: k210: Fix stack coloring for…
29847 …* [#3757](https://github.com/apache/incubator-nuttx/pull/#3757) riscv: Add inline IRQ process func…
29848 * [#4041](https://github.com/apache/incubator-nuttx/pull/#4041) risc-v/bl602: add efuse driver
29849 * [#4384](https://github.com/apache/incubator-nuttx/pull/#4384) Mpfs core pwm
29850 * [#4507](https://github.com/apache/incubator-nuttx/pull/#4507) various MPFS fixes
29852 #### ESP32-C3
29853 …* [#3853](https://github.com/apache/incubator-nuttx/pull/#3853) arch/risc-v/esp32c3: add esp32c3_m…
29856 * [#3784](https://github.com/apache/incubator-nuttx/pull/#3784) risc-v/bl602: Add RTC driver
29857 * [#4607](https://github.com/apache/incubator-nuttx/pull/#4607) Open ble controller adaptation code
29860 …* [#4280](https://github.com/apache/incubator-nuttx/pull/#4280) arch:xtensa: add new GNU toolchain…
29861 …* [#4478](https://github.com/apache/incubator-nuttx/pull/#4478) arch: xtensa: add xtensa cache sup…
29862 …* [#4547](https://github.com/apache/incubator-nuttx/pull/#4547) arch:xtensa: add full bactrace sup…
29863 …* [#4407](https://github.com/apache/incubator-nuttx/pull/#4407) arch/xtensa/src/common: Use irq_sp…
29864 …* [#4403](https://github.com/apache/incubator-nuttx/pull/#4403) Use driver-specific spinlock for E…
29865 * [#4458](https://github.com/apache/incubator-nuttx/pull/#4458) arch:xtensa: add xtensa mpu support
29866 …* [#3762](https://github.com/apache/incubator-nuttx/pull/#3762) xtensa: #ifdef SYMBOL is always tr…
29869 …* [#4638](https://github.com/apache/incubator-nuttx/pull/#4638) esp32xx_rom.ld: Strongly declare s…
29870 …* [#4417](https://github.com/apache/incubator-nuttx/pull/#4417) arch/esp32: Properly handle GPIO i…
29871 …* [#4234](https://github.com/apache/incubator-nuttx/pull/#4234) espressif/esp32/esp32s2/esp32c3: D…
29874 * [#4447](https://github.com/apache/incubator-nuttx/pull/#4447) Fix x86_64
29877 …* [#4233](https://github.com/apache/incubator-nuttx/pull/#4233) board/ctrl: Add BOARDIOC_BOOT_IMAG…
29878 …* [#4191](https://github.com/apache/incubator-nuttx/pull/#4191) Add BOARDCTL_SWITCH_BOOT to suppor…
29879 …* [#4089](https://github.com/apache/incubator-nuttx/pull/#4089) board/ctrl: add BOARDCTL_UNIQUEKEY…
29882 …* [#3921](https://github.com/apache/incubator-nuttx/pull/#3921) sim: Use cc as linker, which usual…
29883 …* [#4108](https://github.com/apache/incubator-nuttx/pull/#4108) boards/sim: enable nxlooper for al…
29884 * [#4222](https://github.com/apache/incubator-nuttx/pull/#4222) sim/cmdline: save boot cmdline
29885 * [#4209](https://github.com/apache/incubator-nuttx/pull/#4209) Fix sim smp
29886 …* [#4207](https://github.com/apache/incubator-nuttx/pull/#4207) arch: sim: Workaround to make the …
29887 …* [#4167](https://github.com/apache/incubator-nuttx/pull/#4167) arch/sim: The second CPU shouldn't…
29888 …* [#3904](https://github.com/apache/incubator-nuttx/pull/#3904) boards/sim/sim/sim: correct LDLINK…
29889 …* [#4056](https://github.com/apache/incubator-nuttx/pull/#4056) arch/sim: Fix bt and audio simulat…
29890 …* [#4045](https://github.com/apache/incubator-nuttx/pull/#4045) sim/smp: fix smp can't start, caus…
29891 * [#4015](https://github.com/apache/incubator-nuttx/pull/#4015) modify sim clock to PC abs time
29892 …3983](https://github.com/apache/incubator-nuttx/pull/#3983) arch/sim: Implement mm_mallinfo and ma…
29893 …* [#4459](https://github.com/apache/incubator-nuttx/pull/#4459) sim: Inhibit stack protector on st…
29894 …* [#3721](https://github.com/apache/incubator-nuttx/pull/#3721) sim/rptun: support multi(>2) core …
29895 …* [#4306](https://github.com/apache/incubator-nuttx/pull/#4306) boards/sim: Add smartfs profile ex…
29896 * [#4258](https://github.com/apache/incubator-nuttx/pull/#4258) Use exit func iml host_abort.
29897 …* [#3689](https://github.com/apache/incubator-nuttx/pull/#3689) Apps Issue #246: Replace romdisk_r…
29898 …* [#4465](https://github.com/apache/incubator-nuttx/pull/#4465) feature: driver: Add a Linux SPI i…
29903 …[#3634](https://github.com/apache/incubator-nuttx/pull/#3634) Documentation/platforms: added docum…
29904 …* [#4470](https://github.com/apache/incubator-nuttx/pull/#4470) Doc: Add initial documentation to …
29905 …* [#4419](https://github.com/apache/incubator-nuttx/pull/#4419) doc/esp32: Add instructions to use…
29908 …* [#3782](https://github.com/apache/incubator-nuttx/pull/#3782) spi: Improve SPI Slave interface d…
29909 …* [#4390](https://github.com/apache/incubator-nuttx/pull/#4390) Documentation: Update ESP32-C3 sup…
29910 …* [#3702](https://github.com/apache/incubator-nuttx/pull/#3702) Documentation/esp32c3: Fix a coupl…
29911 …* [#4242](https://github.com/apache/incubator-nuttx/pull/#4242) Documentation/bl602: Update some i…
29912 …* [#3662](https://github.com/apache/incubator-nuttx/pull/#3662) Fix some issues on SPI documentati…
29913 …* [#4375](https://github.com/apache/incubator-nuttx/pull/#4375) Documentation/esp32-wrover-kit: up…
29914 …* [#4298](https://github.com/apache/incubator-nuttx/pull/#4298) Doc/FAQ: Add more entries about bo…
29915 …* [#3899](https://github.com/apache/incubator-nuttx/pull/#3899) Documentation: Update kconfig-fron…
29916 * [#4235](https://github.com/apache/incubator-nuttx/pull/#4235) Documentation/: Update ESP32 doc.
29917 …* [#3802](https://github.com/apache/incubator-nuttx/pull/#3802) Doc: Improve documentation to make…
29918 …* [#4564](https://github.com/apache/incubator-nuttx/pull/#4564) Doc: Update download version to 10…
29919 …* [#3700](https://github.com/apache/incubator-nuttx/pull/#3700) Convert ESP32-C3 README to the new…
29920 …* [#4298](https://github.com/apache/incubator-nuttx/pull/#4298) Doc/FAQ: Add more entries about bo…
29921 …* [#4297](https://github.com/apache/incubator-nuttx/pull/#4297) Documentation/FAQ: Why /dev/ttySx …
29926 …* [#3842](https://github.com/apache/incubator-nuttx/pull/#3842) Added automatic log rotation, when…
29927 …* [#3837](https://github.com/apache/incubator-nuttx/pull/#3837) SYSLOG channel add functions retur…
29928 …* [#3848](https://github.com/apache/incubator-nuttx/pull/#3848) Syslog file rotations number is co…
29929 …* [#3808](https://github.com/apache/incubator-nuttx/pull/#3808) Ramlog: recover last crash log fro…
29930 …* [#4614](https://github.com/apache/incubator-nuttx/pull/#4614) input/touch: add io command for to…
29931 …* [#4632](https://github.com/apache/incubator-nuttx/pull/#4632) feat: driver: support double buffe…
29932 …https://github.com/apache/incubator-nuttx/pull/#4650) driver/power: using upper-half structure dir…
29933 …* [#4370](https://github.com/apache/incubator-nuttx/pull/#4370) drivers/sensors/bmp280.c: Correct …
29934 …* [#4243](https://github.com/apache/incubator-nuttx/pull/#4243) drivers/mmcsd:Send cmd0 just once …
29935 …* [#4231](https://github.com/apache/incubator-nuttx/pull/#4231) adc: add ioctl command to get the …
29936 * [#4007](https://github.com/apache/incubator-nuttx/pull/#4007) driver/fakesensor: fix bugs.
29937 …* [#4177](https://github.com/apache/incubator-nuttx/pull/#4177) serial: use Ctrl+? composite key t…
29938 …* [#3851](https://github.com/apache/incubator-nuttx/pull/#3851) spi: Refactor SPI Slave interface …
29939 …095](https://github.com/apache/incubator-nuttx/pull/#4095) drivers/syslog: Avoid prepending proces…
29940 …* [#3990](https://github.com/apache/incubator-nuttx/pull/#3990) drivers: wireless: Fix error handl…
29941 …https://github.com/apache/incubator-nuttx/pull/#3860) drivers: serial: Remove an unnecessary criti…
29942 …* [#3910](https://github.com/apache/incubator-nuttx/pull/#3910) serial/pty: Initialize the termina…
29943 …* [#4110](https://github.com/apache/incubator-nuttx/pull/#4110) bcm43xxx: supported IW_AUTH_CIPHER…
29944 …* [#4131](https://github.com/apache/incubator-nuttx/pull/#4131) drivers/rptun: replace the notific…
29945 …* [#4132](https://github.com/apache/incubator-nuttx/pull/#4132) serial: add ctrl+@ to force crash …
29946 …* [#4156](https://github.com/apache/incubator-nuttx/pull/#4156) Fakesensor: support gps by read ne…
29947 …* [#4225](https://github.com/apache/incubator-nuttx/pull/#4225) sensor: directly return -ENOTSUP w…
29948 …4228](https://github.com/apache/incubator-nuttx/pull/#4228) drivers: wireless: Fix to set the addr…
29949 …* [#4288](https://github.com/apache/incubator-nuttx/pull/#4288) adc: add IOCTL commands ANIOC_RESE…
29950 …* [#4312](https://github.com/apache/incubator-nuttx/pull/#4312) drivers/qencoder: add command to s…
29951 …* [#4652](https://github.com/apache/incubator-nuttx/pull/#4652) driver/sensor: support sensor_ops:…
29952 …* [#3633](https://github.com/apache/incubator-nuttx/pull/#3633) drivers/serial: fix Rx interrupt e…
29953 …* [#4504](https://github.com/apache/incubator-nuttx/pull/#4504) add new interface for fb driver an…
29954 …* [#4554](https://github.com/apache/incubator-nuttx/pull/#4554) drivers/lcd: Add GC9A01 driver and…
29955 …* [#3658](https://github.com/apache/incubator-nuttx/pull/#3658) drivers: move the generic upper-ha…
29956 * [#4397](https://github.com/apache/incubator-nuttx/pull/#4397) Update lm3s6965
29957 …* [#4489](https://github.com/apache/incubator-nuttx/pull/#4489) drivers/mmcsd: Pass the right buff…
29958 …* [#4479](https://github.com/apache/incubator-nuttx/pull/#4479) drivers/sdmmc: Remove rwbuffer to …
29959 …* [#4476](https://github.com/apache/incubator-nuttx/pull/#4476) drivers/mmcsd: Change up_udelay to…
29960 …* [#4474](https://github.com/apache/incubator-nuttx/pull/#4474) drivers/mmcsd: Handle the failure …
29961 …* [#4473](https://github.com/apache/incubator-nuttx/pull/#4473) drivers/mmcsd: Fix the wrong forma…
29962 …* [#3720](https://github.com/apache/incubator-nuttx/pull/#3720) driver/syslog: add CONFIG_SYSLOG_R…
29963 …* [#3864](https://github.com/apache/incubator-nuttx/pull/#3864) Fix ht16k33 driver to support mult…
29964 …* [#3828](https://github.com/apache/incubator-nuttx/pull/#3828) syslog/emerg: fix bug about printi…
29965 …* [#3806](https://github.com/apache/incubator-nuttx/pull/#3806) syslog: fix bug about syslog_defau…
29966 …* [#3936](https://github.com/apache/incubator-nuttx/pull/#3936) syslog/ramlog: Remove the duplicat…
29967 …* [#3907](https://github.com/apache/incubator-nuttx/pull/#3907) serial/pty: Don't return -NOSYS if…
29968 …* [#3742](https://github.com/apache/incubator-nuttx/pull/#3742) drivers/modem/altair: Fix behavior…
29969 …* [#3741](https://github.com/apache/incubator-nuttx/pull/#3741) drivers/mtd/smart.c: Recover the m…
29970 …* [#3736](https://github.com/apache/incubator-nuttx/pull/#3736) drivers/syslog: Remove emergstream…
29971 …* [#3726](https://github.com/apache/incubator-nuttx/pull/#3726) rtc: add config RTC_RPMSG_SERVER, …
29972 …* [#4113](https://github.com/apache/incubator-nuttx/pull/#4113) syslog/ramlog: optimize code and f…
29973 …* [#4111](https://github.com/apache/incubator-nuttx/pull/#4111) syslog/intbuf: force output log wh…
29974 * [#4042](https://github.com/apache/incubator-nuttx/pull/#4042) serial: add ioctl TIOCNOTTY
29975 …* [#4034](https://github.com/apache/incubator-nuttx/pull/#4034) syslog: add CPU id to system when …
29976 …* [#4032](https://github.com/apache/incubator-nuttx/pull/#4032) syslog: fix crash when print local…
29977 …* [#3979](https://github.com/apache/incubator-nuttx/pull/#3979) note: Move up_schednote.c to drive…
29978 …* [#4475](https://github.com/apache/incubator-nuttx/pull/#4475) drivers/mmcsd: Change mmsd_ prefix…
29979 …* [#4415](https://github.com/apache/incubator-nuttx/pull/#4415) Adds driver for msa301 sensore mod…
29980 …* [#4420](https://github.com/apache/incubator-nuttx/pull/#4420) sensor: fix the bug that lsm6dsl s…
29981 …* [#3787](https://github.com/apache/incubator-nuttx/pull/#3787) drivers/spi: Add SPI Slave charact…
29982 …* [#4566](https://github.com/apache/incubator-nuttx/pull/#4566) drivers/syslog: Call up_puts in sy…
29983 …* [#4580](https://github.com/apache/incubator-nuttx/pull/#4580) drivers/syslog: Ensure the buffer …
29984 * [#4302](https://github.com/apache/incubator-nuttx/pull/#4302) Compile fixes in MCP23X17 driver.
29985 * [#4299](https://github.com/apache/incubator-nuttx/pull/#4299) bchlib: Improve error handling
29986 …* [#4345](https://github.com/apache/incubator-nuttx/pull/#4345) mtd: Implement BIOC_PARTINFO for a…
29987 …* [#4248](https://github.com/apache/incubator-nuttx/pull/#4248) mtd: Return MTD Partition Informat…
29988 …* [#4166](https://github.com/apache/incubator-nuttx/pull/#4166) mtd: Add MTDIOC_ERASESTATE command…
29989 …* [#3885](https://github.com/apache/incubator-nuttx/pull/#3885) mtd: Add MTDIOC_FLUSH IOCTL like M…
29990 * [#3722](https://github.com/apache/incubator-nuttx/pull/#3722) lirc: fix bug about lirc_raw_event
29991 …* [#4515](https://github.com/apache/incubator-nuttx/pull/#4515) rptun: add CONFIG_RPTUN_LOADER to …
29992 * [#4223](https://github.com/apache/incubator-nuttx/pull/#4223) rptun: optimize multi-core startup
29993 …* [#4552](https://github.com/apache/incubator-nuttx/pull/#4552) bcm43xxx: abrupt stall of receivin…
29994 …* [#4565](https://github.com/apache/incubator-nuttx/pull/#4565) bcm43xxx: added SDPCM frame pool s…
29995 …#4236](https://github.com/apache/incubator-nuttx/pull/#4236) bcm43xxx: fixed issues with unaligned…
29996 …* [#4567](https://github.com/apache/incubator-nuttx/pull/#4567) lcd/st77xx: change 16 bit cmd send…
29997 * [#4137](https://github.com/apache/incubator-nuttx/pull/#4137) bluetooth: add more OGF definition
29998 * [#4039](https://github.com/apache/incubator-nuttx/pull/#4039) Add putarea() method for st7789
29999 …* [#3754](https://github.com/apache/incubator-nuttx/pull/#3754) wireless/bluetooth: decoupling bt_…
30002 …* [#3727](https://github.com/apache/incubator-nuttx/pull/#3727) Add basic support for MCP23017 I/O…
30003 …* [#3859](https://github.com/apache/incubator-nuttx/pull/#3859) Add Holtek HT16K33 14-segment disp…
30004 …* [#4641](https://github.com/apache/incubator-nuttx/pull/#4641) drivers/mtd/m25px.c: add support f…
30005 * [#4606](https://github.com/apache/incubator-nuttx/pull/#4606) Add support for MT25Q1G SPI NOR
30006 …* [#4373](https://github.com/apache/incubator-nuttx/pull/#4373) Add support for 3-phase Hall effec…
30007 …* [#4490](https://github.com/apache/incubator-nuttx/pull/#4490) add support for power management i…
30018 * [#3833](https://github.com/apache/incubator-nuttx/pull/#3833) Spresense new memorymap
30019 * [#4526](https://github.com/apache/incubator-nuttx/pull/#4526) Rearch video
30020 …#3973](https://github.com/apache/incubator-nuttx/pull/#3973) boards: spresense: Update rndis and r…
30021 …* [#3744](https://github.com/apache/incubator-nuttx/pull/#3744) boards: cxd56xx: Update drivers on…
30024 * [#3733](https://github.com/apache/incubator-nuttx/pull/#3733) imx6 elf support
30027 …2](https://github.com/apache/incubator-nuttx/pull/#3982) boards/arm/imxrt/teensy-4.x: added board …
30028 …* [#3929](https://github.com/apache/incubator-nuttx/pull/#3929) Added encoder support for Teensy 4…
30029 * [#3980](https://github.com/apache/incubator-nuttx/pull/#3980) FlexPWM support for iMXRT MCU
30030 …* [#4581](https://github.com/apache/incubator-nuttx/pull/#4581) Fixed imxrt flexcan driver compila…
30037 …* [#3917](https://github.com/apache/incubator-nuttx/pull/#3917) arm/rp2040:USB device controller s…
30038 …* [#3857](https://github.com/apache/incubator-nuttx/pull/#3857) boards: rp2040: Add user gpio driv…
30039 …* [#3996](https://github.com/apache/incubator-nuttx/pull/#3996) Support for Waveshare Pico-LCD-1.x…
30040 …* [#4086](https://github.com/apache/incubator-nuttx/pull/#4086) Added PCF8574 backpack support to …
30041 * [#4204](https://github.com/apache/incubator-nuttx/pull/#4204) added st7735 LCD based support
30042 * [#4289](https://github.com/apache/incubator-nuttx/pull/#4289) Fixing BMP180 and INA219 in RP2040
30045 …* [#4643](https://github.com/apache/incubator-nuttx/pull/#4643) S32K1xx arch: Add (optional) suppo…
30046 …* [#4634](https://github.com/apache/incubator-nuttx/pull/#4634) S32K1XX arch: gpioread may also be…
30047 * [#4592](https://github.com/apache/incubator-nuttx/pull/#4592) S32K1XX: Add LPI2C slave support
30048 * [#4541](https://github.com/apache/incubator-nuttx/pull/#4541) S32K1XX EVB boards cleanup & update
30049 …* [#4578](https://github.com/apache/incubator-nuttx/pull/#4578) S32K1XXEVB boards: Fix RGB LED out…
30050 * [#4533](https://github.com/apache/incubator-nuttx/pull/#4533) S32k1xx: added PM support
30051 * [#4596](https://github.com/apache/incubator-nuttx/pull/#4596) S32K1XX: Add FlexIO registers
30052 …* [#4508](https://github.com/apache/incubator-nuttx/pull/#4508) s32k1xx: added way to get the rese…
30053 …* [#4560](https://github.com/apache/incubator-nuttx/pull/#4560) RDDRONE-UAVCAN / UCANS32K146 board…
30056 …* [#3732](https://github.com/apache/incubator-nuttx/pull/#3732) board: Add support for Adafruit Ci…
30057 …* [#3840](https://github.com/apache/incubator-nuttx/pull/#3840) Add ST7789 LCD controller support …
30060 …#3944](https://github.com/apache/incubator-nuttx/pull/#3944) boards/arm/stm32/nucleo-f446re: added…
30061 …#3880](https://github.com/apache/incubator-nuttx/pull/#3880) boards/arm/stm32/nucleo-f446re: added…
30062 …* [#3909](https://github.com/apache/incubator-nuttx/pull/#3909) Added basic support for nucleo-g43…
30063 …* [#3922](https://github.com/apache/incubator-nuttx/pull/#3922) Adds PWM example to nucleo-g431kb …
30064 …* [#3914](https://github.com/apache/incubator-nuttx/pull/#3914) boards: added support for EMW3162 …
30065 …* [#3878](https://github.com/apache/incubator-nuttx/pull/#3878) Add FOC support for B-G431-ESC1 bo…
30066 …#3637](https://github.com/apache/incubator-nuttx/pull/#3637) boards/arm/stm32/nucleo-f446re: added…
30067 …* [#3660](https://github.com/apache/incubator-nuttx/pull/#3660) stm32_pwm: improvements for PULSEC…
30068 …* [#4505](https://github.com/apache/incubator-nuttx/pull/#4505) STM32 F4, F7, H7 USB OTG Device En…
30069 …* [#4589](https://github.com/apache/incubator-nuttx/pull/#4589) Fix stm32xx GPIO glitches from con…
30070 …* [#4085](https://github.com/apache/incubator-nuttx/pull/#4085) stm32,stm32f7,stm32h7: supported E…
30071 …* [#4255](https://github.com/apache/incubator-nuttx/pull/#4255) STM32 DAC Driver - Add support to …
30072 …* [#3796](https://github.com/apache/incubator-nuttx/pull/#3796) boards/arm/stm32/nucleo-f412zg/scr…
30073 …* [#4284](https://github.com/apache/incubator-nuttx/pull/#4284) stm32_pmw: fix pwm_stop() function…
30074 * [#4353](https://github.com/apache/incubator-nuttx/pull/#4353) stm32/stm32_serial.c fix issue
30075 …* [#4244](https://github.com/apache/incubator-nuttx/pull/#4244) STM32G4: add support for CORDIC ma…
30076 …* [#4437](https://github.com/apache/incubator-nuttx/pull/#4437) stm32_serial.c: Don't fake a TX in…
30077 …3](https://github.com/apache/incubator-nuttx/pull/#3863) boards/arm/stm32/nucleo-f446re: fixed wro…
30078 …* [#3952](https://github.com/apache/incubator-nuttx/pull/#3952) SDIO IO_RW_EXTENDED command (CMD53…
30079 …* [#4597](https://github.com/apache/incubator-nuttx/pull/#4597) Add LCD backpack support for ESP32…
30082 * [#4534](https://github.com/apache/incubator-nuttx/pull/#4534) STM32L4 LPUART support
30087 …646](https://github.com/apache/incubator-nuttx/pull/#3646) boards/stm32f7: Add i2c and mpu60x0 sup…
30088 …* [#3650](https://github.com/apache/incubator-nuttx/pull/#3650) stm32{H7|F7} Disables/Enabled the …
30089 …* [#3669](https://github.com/apache/incubator-nuttx/pull/#3669) STM32 {F7|H7} Use 250 Ms Data path…
30090 …* [#3651](https://github.com/apache/incubator-nuttx/pull/#3651) Use inttypes in stm32{f7|h7}, Kine…
30091 …* [#4524](https://github.com/apache/incubator-nuttx/pull/#4524) stm32*7/stm32_serial.c: Don't fake…
30092 …* [#4598](https://github.com/apache/incubator-nuttx/pull/#4598) stm32h7:DMA_TRBUFF is DMA_SCR_TRBU…
30095 * [#4190](https://github.com/apache/incubator-nuttx/pull/#4190) kinetis lpserial add RX DMA
30099 * [#3684](https://github.com/apache/incubator-nuttx/pull/) avr32dev1: USART1 RX: Reassign pin
30103 …* [#4264](https://github.com/apache/incubator-nuttx/pull/) boards: added a basic support for chipK…
30105 #### RISC-V
30106 …* [#3846](https://github.com/apache/incubator-nuttx/pull/#3846) risc-v/rv32m1: Basic port to rv32m…
30107 * [#4146](https://github.com/apache/incubator-nuttx/pull/#4146) risc-v/bl602: add boardctl support
30108 …* [#3911](https://github.com/apache/incubator-nuttx/pull/#3911) Add i2c driver to PolarFire SoC an…
30109 …* [#3905](https://github.com/apache/incubator-nuttx/pull/#3905) Add SPI driver to PolarFire SoC an…
30110 * [#3933](https://github.com/apache/incubator-nuttx/pull/#3933) riscv/mpfs: add i2c reset handler
30111 * [#3920](https://github.com/apache/incubator-nuttx/pull/#3920) add dma support for PolarFire SoC
30112 * [#4569](https://github.com/apache/incubator-nuttx/pull/#4569) MPFS emmcsd
30115 …* [#4010](https://github.com/apache/incubator-nuttx/pull/#4010) boards/bl602: Fix uart_nx.c:419: u…
30119 #### ESP32-C3
30120 …* [#3794](https://github.com/apache/incubator-nuttx/pull/#3794) risc-v/esp32c3: Support ESP32-C3 R…
30121 …* [#3883](https://github.com/apache/incubator-nuttx/pull/#3883) risc-v/esp32c3: Support ESP32-C3 R…
30122 …* [#3881](https://github.com/apache/incubator-nuttx/pull/#3881) risc-v/esp32c3: Support ESP32-C3 e…
30123 …* [#3935](https://github.com/apache/incubator-nuttx/pull/#3935) risc-v/esp32c3: Support ESP32-C3 S…
30124 …* [#3882](https://github.com/apache/incubator-nuttx/pull/#3882) riscv/esp32c3: Use the RTC memory …
30125 …* [#3945](https://github.com/apache/incubator-nuttx/pull/#3945) boards/esp32c3: Add romfs configur…
30126 …* [#3925](https://github.com/apache/incubator-nuttx/pull/#3925) risc-v/esp32-c3: Adds I2C polled s…
30127 …* [#3823](https://github.com/apache/incubator-nuttx/pull/#3823) risc-v/esp32-c3: Add support for H…
30128 …* [#3822](https://github.com/apache/incubator-nuttx/pull/#3822) ESP32-C3: Add DMA support for SPI …
30129 …* [#3543](https://github.com/apache/incubator-nuttx/pull/#3543) feat(esp32c3): Support esp32c3 ble…
30130 …* [#3667](https://github.com/apache/incubator-nuttx/pull/#3667) risc-v/esp32c3: Add ESP32-C3 (G)DM…
30131 …* [#4605](https://github.com/apache/incubator-nuttx/pull/#4605) risc-v/esp32-c3: improvements and …
30132 …* [#4611](https://github.com/apache/incubator-nuttx/pull/#4611) ESP32-C3: Add support for booting …
30133 …* [#3656](https://github.com/apache/incubator-nuttx/pull/#3656) risc-v/esp32-c3: Adds freerun wrap…
30134 …* [#4574](https://github.com/apache/incubator-nuttx/pull/#4574) esp32c3-devkit: Add board profile …
30135 …#3810](https://github.com/apache/incubator-nuttx/pull/#3810) risc-v/esp32c3: Fix overwriting of re…
30136 …* [#3797](https://github.com/apache/incubator-nuttx/pull/#3797) ESP32-C3: Add SPI Slave peripheral…
30137 …* [#4568](https://github.com/apache/incubator-nuttx/pull/#4568) boards/esp32c3: add ESP32C3 LCD dr…
30138 * [#4553](https://github.com/apache/incubator-nuttx/pull/#4553) risc-v/esp32c3: fix pwm driver bug
30139 …* [#4500](https://github.com/apache/incubator-nuttx/pull/#4500) risc-v/esp32-c3: refactor the Wi-F…
30140 …* [#3679](https://github.com/apache/incubator-nuttx/pull/#3679) risc-v/esp32c3: Support ESP32-C3 P…
30141 …* [#3766](https://github.com/apache/incubator-nuttx/pull/#3766) riscv/esp32c3: Add ESP32-C3 AES dr…
30142 …* [#3750](https://github.com/apache/incubator-nuttx/pull/#3750) riscv/esp32c3: Support SPI Flash e…
30143 …* [#3735](https://github.com/apache/incubator-nuttx/pull/#3735) riscv/esp32c3: Add ESP32-C3 ADC dr…
30144 …* [#3715](https://github.com/apache/incubator-nuttx/pull/#3715) risc-v/esp32c3: Support ESP32-C3 a…
30145 …* [#4239](https://github.com/apache/incubator-nuttx/pull/#4239) risc-v/esp32-c3: Adds systimer sup…
30146 …* [#3694](https://github.com/apache/incubator-nuttx/pull/#3694) risc-v/esp32c3: Add support for DM…
30147 * [#3697](https://github.com/apache/incubator-nuttx/pull/#3697) riscv/esp32c3: Fix RT timer issues
30148 … [#3906](https://github.com/apache/incubator-nuttx/pull/#3906) risc-v/esp32c3_wifi_adapter.c: Remo…
30149 …* [#3701](https://github.com/apache/incubator-nuttx/pull/#3701) riscv/esp32c3: Add ESP32C3 LEDC(PW…
30150 …* [#3854](https://github.com/apache/incubator-nuttx/pull/#3854) ESP32-C3: Small clean up on IRQ fu…
30151 …* [#4006](https://github.com/apache/incubator-nuttx/pull/#4006) risc-v/esp32c3: Notifies networkin…
30152 …3788](https://github.com/apache/incubator-nuttx/pull/#3788) ESP32-C3: Fix configuration of TX Burs…
30153 …* [#4040](https://github.com/apache/incubator-nuttx/pull/#4040) risc-v/esp32c3: Fix some ESP32-C3 …
30154 …* [#4082](https://github.com/apache/incubator-nuttx/pull/#4082) boards/esp32c3-devkit: Support mou…
30155 …* [#4075](https://github.com/apache/incubator-nuttx/pull/#4075) risc-v/esp32c3: Add board_ioctl an…
30156 …* [#4092](https://github.com/apache/incubator-nuttx/pull/#4092) risc-v/esp32c3: Use onexit to free…
30157 …* [#3971](https://github.com/apache/incubator-nuttx/pull/#3971) boards/riscv/esp32c3: Rename the i…
30158 …* [#4141](https://github.com/apache/incubator-nuttx/pull/#4141) risc-v/esp32-c3: Use systimer 0 to…
30159 …* [#3793](https://github.com/apache/incubator-nuttx/pull/#3793) esp32&esp32c3/wifi: Support specif…
30160 …* [#4162](https://github.com/apache/incubator-nuttx/pull/#4162) risc-v/esp32c3: Fix some ESP32-C3 …
30161 …* [#4169](https://github.com/apache/incubator-nuttx/pull/#4169) risc-v/esp32-c3: Makes output read…
30162 …* [#4314](https://github.com/apache/incubator-nuttx/pull/#4314) risc-v/esp32-c3: Complete the supp…
30165 …0](https://github.com/apache/incubator-nuttx/pull/#4590) [Xtensa/RISC-V] Remove FAR and CODE quali…
30166 …* [#4187](https://github.com/apache/incubator-nuttx/pull/#4187) Fix xtensa_btdump() to look at the…
30167 …* [#4556](https://github.com/apache/incubator-nuttx/pull/#4556) xtensa:backtrace: flush to stack w…
30168 * [#3939](https://github.com/apache/incubator-nuttx/pull/#3939) Fix xtensa
30169 …* [#4531](https://github.com/apache/incubator-nuttx/pull/#4531) xtensa/irq.h: Fixes the routine th…
30170 …* [#4278](https://github.com/apache/incubator-nuttx/pull/#4278) xtensa/common: save sp before over…
30171 …* [#4311](https://github.com/apache/incubator-nuttx/pull/#4311) xtensa:coproc: fix XTENSA_CP_ALLSE…
30172 …* [#3768](https://github.com/apache/incubator-nuttx/pull/#3768) xtensa: Fixes names of architectur…
30175 …* [#3940](https://github.com/apache/incubator-nuttx/pull/#3940) xtensa/esp32: Support ESP32 RTC dr…
30176 …* [#4003](https://github.com/apache/incubator-nuttx/pull/#4003) xtensa/esp32: Adds support for SER…
30177 …* [#3912](https://github.com/apache/incubator-nuttx/pull/#3912) xtensa/esp32: Adds I2C polled supp…
30178 …* [#3803](https://github.com/apache/incubator-nuttx/pull/#3803) Add support to ESP32-S2 and ESP32S…
30179 …* [#3824](https://github.com/apache/incubator-nuttx/pull/#3824) xtensa/esp32-s2: Add support for s…
30180 …* [#4604](https://github.com/apache/incubator-nuttx/pull/#4604) xtensa/esp32: Enable build system …
30181 * [#3642](https://github.com/apache/incubator-nuttx/pull/#3642) xtensa/esp32: several uart fixes
30182 …* [#3648](https://github.com/apache/incubator-nuttx/pull/#3648) tools/esp32/mk_qemu_img.sh: Refact…
30183 …* [#4625](https://github.com/apache/incubator-nuttx/pull/#4625) esp32-c3/esp32-s2: Fix the sequenc…
30184 …* [#4610](https://github.com/apache/incubator-nuttx/pull/#4610) ESP32-S2: Add support for booting …
30185 * [#3678](https://github.com/apache/incubator-nuttx/pull/#3678) xtensa/esp32: Support auto-sleep
30186 … [#4532](https://github.com/apache/incubator-nuttx/pull/#4532) boards/esp32s2-saola-1: Add impleme…
30187 …* [#4275](https://github.com/apache/incubator-nuttx/pull/#4275) xtensa/esp32: Keep track of the CP…
30188 …* [#4295](https://github.com/apache/incubator-nuttx/pull/#4295) xtensa/esp32: Enable boot from Esp…
30189 * [#4315](https://github.com/apache/incubator-nuttx/pull/#4315) xtensa/esp32: Fix issues on RWDT
30190 …* [#4366](https://github.com/apache/incubator-nuttx/pull/#4366) xtensa/esp32: Use IRQ to enable/di…
30191 …* [#4427](https://github.com/apache/incubator-nuttx/pull/#4427) esp32/ttgo_lora_esp32: Add support…
30192 …* [#4388](https://github.com/apache/incubator-nuttx/pull/#4388) esp32: Re-organize the interrupt h…
30193 …* [#4401](https://github.com/apache/incubator-nuttx/pull/#4401) xtensa/esp32-s2: Adds support to t…
30194 …* [#4545](https://github.com/apache/incubator-nuttx/pull/#4545) esp32-wrover: Add support to LCD16…
30195 …* [#4587](https://github.com/apache/incubator-nuttx/pull/#4587) xtensa/esp32-s2: Adds freerun time…
30196 * [#4139](https://github.com/apache/incubator-nuttx/pull/#4139) xtensa/esp32: Fixes termios issue.
30197 …* [#4586](https://github.com/apache/incubator-nuttx/pull/#4586) xtensa/esp32-s2: Adds oneshot devi…
30198 …* [#4570](https://github.com/apache/incubator-nuttx/pull/#4570) esp32_spiflash.c: Correctly disabl…
30199 …* [#4509](https://github.com/apache/incubator-nuttx/pull/#4509) esp32: Add initial support to Blue…
30200 …* [#4411](https://github.com/apache/incubator-nuttx/pull/#4411) esp32/softap: Enable the WPA2 by d…
30201 …4412](https://github.com/apache/incubator-nuttx/pull/#4412) boards/esp32: Add basic support to TTG…
30202 …https://github.com/apache/incubator-nuttx/pull/#4585) xtensa/esp32-s2: Adds support to rt_timer an…
30203 …* [#4170](https://github.com/apache/incubator-nuttx/pull/#4170) xtensa/esp32: Make output readable…
30204 …* [#4195](https://github.com/apache/incubator-nuttx/pull/#4195) esp32_allocateheap.c: Remove the a…
30205 …* [#4232](https://github.com/apache/incubator-nuttx/pull/#4232) xtensa/esp32: Enable configuration…
30206 …* [#4240](https://github.com/apache/incubator-nuttx/pull/#4240) xtensa/esp32: expose SPI2 as a cha…
30207 …* [#4253](https://github.com/apache/incubator-nuttx/pull/#4253) xtensa/esp32: Enable the allocatio…
30208 …* [#4338](https://github.com/apache/incubator-nuttx/pull/#4338) tools/esp32/Config.mk: Allow ESPTO…
30209 …* [#3938](https://github.com/apache/incubator-nuttx/pull/#3938) esp32&esp32c3/wifi: Fix the issues…
30210 …ithub.com/apache/incubator-nuttx/pull/#3969) boards/esp32: Refactor the different linker scripts a…
30211 …* [#3975](https://github.com/apache/incubator-nuttx/pull/#3975) xtensa/esp32: Fix RTC WDT deinitia…
30212 …* [#3987](https://github.com/apache/incubator-nuttx/pull/#3987) tools/esp32/backtrace.gdbscript: d…
30213 …1](https://github.com/apache/incubator-nuttx/pull/#4001) xtensa/esp32: Support to select different…
30214 * [#4073](https://github.com/apache/incubator-nuttx/pull/#4073) xtensa/esp32: Fix uart 2 issue.
30215 …* [#3800](https://github.com/apache/incubator-nuttx/pull/#3800) arch/xtensa/esp32_emac.c: Call phy…
30216 …* [#4157](https://github.com/apache/incubator-nuttx/pull/#4157) boards/esp32: Refactor the linker …
30217 …49](https://github.com/apache/incubator-nuttx/pull/#4249) xtensa/esp32-s2: Adds GPIO board logic t…
30218 …* [#4471](https://github.com/apache/incubator-nuttx/pull/#4471) xtensa/esp32: Wi-Fi board logic re…
30219 …* [#4497](https://github.com/apache/incubator-nuttx/pull/#4497) esp32_serial.c: Don't fake an inte…
30220 …* [#3829](https://github.com/apache/incubator-nuttx/pull/#3829) xtensa/esp32: Fixes support for UA…
30221 …* [#3943](https://github.com/apache/incubator-nuttx/pull/#3943) xtensa/esp32: Adds I2C Bit banging…
30222 …* [#3960](https://github.com/apache/incubator-nuttx/pull/#3960) xtensa/esp32: Refactor the text he…
30223 …* [#4646](https://github.com/apache/incubator-nuttx/pull/#4646) Add example to use BLE and WiFi at…
30228 …* [#3653](https://github.com/apache/incubator-nuttx/pull/#3653) fs:cromf Use inttypes in printing …
30229 …* [#4573](https://github.com/apache/incubator-nuttx/pull/#4573) fs:procfs: add waiting_paging_fill…
30230 …* [#3745](https://github.com/apache/incubator-nuttx/pull/#3745) fs/vfs/fs_select.c: Fix select() t…
30231 …* [#3740](https://github.com/apache/incubator-nuttx/pull/#3740) fs/fat/fat32util.c: Fix calculatio…
30232 …* [#3724](https://github.com/apache/incubator-nuttx/pull/#3724) fs/hostfs: fix bug about getting e…
30233 …* [#3785](https://github.com/apache/incubator-nuttx/pull/#3785) FAT32 fix skipping sectors at comp…
30234 …* [#4171](https://github.com/apache/incubator-nuttx/pull/#4171) fs/tmpfs: Handle the tail '/' corr…
30235 …* [#4539](https://github.com/apache/incubator-nuttx/pull/#4539) vfs/poll: correct the return event…
30236 …* [#3760](https://github.com/apache/incubator-nuttx/pull/#3760) Fix calculation of free clusters a…
30237 * [#4012](https://github.com/apache/incubator-nuttx/pull/#4012) fs: move out nx_close from filelock
30238 …* [#3974](https://github.com/apache/incubator-nuttx/pull/#3974) fs/tmpfs: Fix the memory corruptio…
30239 …* [#3986](https://github.com/apache/incubator-nuttx/pull/#3986) fs: nfs: Reconnect to the NFS serv…
30240 …* [#4031](https://github.com/apache/incubator-nuttx/pull/#4031) fs/fs_dup2: (sanity check )correct…
30241 …* [#4033](https://github.com/apache/incubator-nuttx/pull/#4033) fs/procfs: add StackAlloc field fo…
30242 …* [#4061](https://github.com/apache/incubator-nuttx/pull/#4061) FAT32 kconfig entry to enforce com…
30243 …* [#4079](https://github.com/apache/incubator-nuttx/pull/#4079) fs/procfs: layout the output of me…
30244 …* [#4093](https://github.com/apache/incubator-nuttx/pull/#4093) fs: Move the default ioctl handle …
30245 …* [#4097](https://github.com/apache/incubator-nuttx/pull/#4097) fs: Remove the inernal st_count fi…
30246 …* [#4101](https://github.com/apache/incubator-nuttx/pull/#4101) fs: pseudorename should call inode…
30247 …* [#4118](https://github.com/apache/incubator-nuttx/pull/#4118) fs: Support the root file system a…
30248 …* [#4119](https://github.com/apache/incubator-nuttx/pull/#4119) fs: fstat shouldn't follow the sym…
30249 …* [#4121](https://github.com/apache/incubator-nuttx/pull/#4121) vfs: stat_recursive should return …
30250 …* [#4123](https://github.com/apache/incubator-nuttx/pull/#4123) nuttx: littlefs_close should retur…
30251 …* [#4153](https://github.com/apache/incubator-nuttx/pull/#4153) fs: Add fchstat and chstat callbac…
30252 …* [#4165](https://github.com/apache/incubator-nuttx/pull/#4165) fs: should only apply umask to the…
30253 * [#4174](https://github.com/apache/incubator-nuttx/pull/#4174) Fix nfs and statfs
30254 …* [#4193](https://github.com/apache/incubator-nuttx/pull/#4193) fs: Change off_t and related types…
30255 …* [#4224](https://github.com/apache/incubator-nuttx/pull/#4224) fs/inode: add sanity check for ino…
30256 …* [#4263](https://github.com/apache/incubator-nuttx/pull/#4263) fs: Save umask to tls_task_s for n…
30257 * [#4300](https://github.com/apache/incubator-nuttx/pull/#4300) fs: Add utimens and lutimens
30258 …* [#4307](https://github.com/apache/incubator-nuttx/pull/#4307) fs/userfs: Support fchstat and chs…
30259 …* [#4308](https://github.com/apache/incubator-nuttx/pull/#4308) fs/unionfs: Support fchstat and ch…
30260 …* [#4309](https://github.com/apache/incubator-nuttx/pull/#4309) fs/nfs: Support fchstat and chstat…
30261 …* [#4330](https://github.com/apache/incubator-nuttx/pull/#4330) fs/littlefs: improve littlefs flas…
30262 …* [#4332](https://github.com/apache/incubator-nuttx/pull/#4332) fs: Support 64bit in register_[blo…
30263 * [#4333](https://github.com/apache/incubator-nuttx/pull/#4333) fs/partition: Support BIOC_PARTINFO
30264 …* [#4321](https://github.com/apache/incubator-nuttx/pull/#4321) fs: Remove endsector from partitio…
30265 …0](https://github.com/apache/incubator-nuttx/pull/#3680) fs/eventfd: add EVENT_FD_POLL as a Kconfi…
30266 …* [#4514](https://github.com/apache/incubator-nuttx/pull/#4514) fs/ioctl: using FIOC_FILEPATH inst…
30267 …* [#4511](https://github.com/apache/incubator-nuttx/pull/#4511) inode_getpath: correct get path wh…
30268 …* [#4276](https://github.com/apache/incubator-nuttx/pull/#4276) Fix status register reading in ram…
30269 …* [#4290](https://github.com/apache/incubator-nuttx/pull/#4290) cmd/df: Fix the abnormal output af…
30270 …* [#4133](https://github.com/apache/incubator-nuttx/pull/#4133) profs: Print StackAlloc by procfs_…
30277 …* [#4538](https://github.com/apache/incubator-nuttx/pull/#4538) sys/socket/scm: add more socket me…
30278 * [#4080](https://github.com/apache/incubator-nuttx/pull/#4080) net/socket: add SO_SNDBUF support
30279 * [#4116](https://github.com/apache/incubator-nuttx/pull/#4116) net: Add file_socket function
30280 * [#4135](https://github.com/apache/incubator-nuttx/pull/#4135) net/rpmsg: add multi-iov support
30281 * [#4179](https://github.com/apache/incubator-nuttx/pull/#4179) Update socket rpmsg
30282 …* [#4355](https://github.com/apache/incubator-nuttx/pull/#4355) net/rpmsg: add nonblock connect(2)…
30283 …* [#4356](https://github.com/apache/incubator-nuttx/pull/#4356) net/local: add nonblock connect(2)…
30284 …* [#4357](https://github.com/apache/incubator-nuttx/pull/#4357) net/tcp: add nonblock connect(2) s…
30285 * [#4070](https://github.com/apache/incubator-nuttx/pull/#4070) net/tcp: add window scale support
30286 * [#3926](https://github.com/apache/incubator-nuttx/pull/#3926) net/inet: add support of FIONREAD
30287 …* [#3896](https://github.com/apache/incubator-nuttx/pull/#3896) net/local: add local_nextconn() he…
30288 …* [#3961](https://github.com/apache/incubator-nuttx/pull/#3961) net: Add if_nameindex and if_freen…
30289 * [#4069](https://github.com/apache/incubator-nuttx/pull/#4069) net/socket: add SO_RCVBUF support
30290 …* [#4071](https://github.com/apache/incubator-nuttx/pull/#4071) net/local: add AF_[UNIX|LOCAL] soc…
30291 * [#4540](https://github.com/apache/incubator-nuttx/pull/#4540) net/local: add FIONSPACE support
30292 …* [#4593](https://github.com/apache/incubator-nuttx/pull/#4593) net/local: add socket message cont…
30295 …* [#4602](https://github.com/apache/incubator-nuttx/pull/#4602) net/dup: only start tcp monitor on…
30296 …* [#4649](https://github.com/apache/incubator-nuttx/pull/#4649) net: always compile listen.c and a…
30297 …* [#4603](https://github.com/apache/incubator-nuttx/pull/#4603) [SECURITY]net/tcp: sanity check fo…
30298 …* [#4579](https://github.com/apache/incubator-nuttx/pull/#4579) net/devif/devif_callback.c: made t…
30299 …* [#4433](https://github.com/apache/incubator-nuttx/pull/#4433) net/devif/devif_callback.c: correc…
30300 …* [#3776](https://github.com/apache/incubator-nuttx/pull/#3776) net/dev: link the net device as or…
30301 …* [#3758](https://github.com/apache/incubator-nuttx/pull/#3758) net/tcp/retransmit: recounter the …
30302 …* [#3723](https://github.com/apache/incubator-nuttx/pull/#3723) net: Forward socket option only wh…
30303 …* [#4480](https://github.com/apache/incubator-nuttx/pull/#4480) net: utils: Remove critical sectio…
30304 * [#3707](https://github.com/apache/incubator-nuttx/pull/#3707) Fix NFS over TCP
30305 * [#3818](https://github.com/apache/incubator-nuttx/pull/#3818) tcp: recv window update improvement
30306 …* [#3655](https://github.com/apache/incubator-nuttx/pull/#3655) Attempt to fix race condition repo…
30307 * [#3865](https://github.com/apache/incubator-nuttx/pull/#3865) Fix tcp seq wrap around issues
30308 …* [#3889](https://github.com/apache/incubator-nuttx/pull/#3889) net/dns:fix unaligned access in dn…
30309 …* [#3894](https://github.com/apache/incubator-nuttx/pull/#3894) net/telnet: fix a potential busylo…
30310 …* [#3934](https://github.com/apache/incubator-nuttx/pull/#3934) net/local: Remove all HAVE_LOCAL_P…
30311 …* [#3755](https://github.com/apache/incubator-nuttx/pull/#3755) net/icmp: icmp bug fix and enhance…
30312 …* [#3993](https://github.com/apache/incubator-nuttx/pull/#3993) tcp_reset: Don't copy the peer win…
30313 …* [#3994](https://github.com/apache/incubator-nuttx/pull/#3994) tcp: always responds to keep-alive…
30314 …* [#3995](https://github.com/apache/incubator-nuttx/pull/#3995) fix active close for CONFIG_NET_TC…
30315 …* [#3999](https://github.com/apache/incubator-nuttx/pull/#3999) some follow-up patches for the rec…
30316 …017](https://github.com/apache/incubator-nuttx/pull/#4017) rpmsg_socket: fix rpmsg_socket_device_d…
30317 …* [#4022](https://github.com/apache/incubator-nuttx/pull/#4022) tcp_close: Fix a race with passive…
30318 …* [#3966](https://github.com/apache/incubator-nuttx/pull/#3966) net: Fix: left shift of 1 by 31 pl…
30319 * [#3948](https://github.com/apache/incubator-nuttx/pull/#3948) TCP: simplify readahead
30320 …* [#3114](https://github.com/apache/incubator-nuttx/pull/#3114) usrsock/recv: guarantee all data i…
30321 …* [#3756](https://github.com/apache/incubator-nuttx/pull/#3756) net/tcp: set/get TCP_KEEPINTVL/IDL…
30322 …* [#3895](https://github.com/apache/incubator-nuttx/pull/#3895) net/accept: alloc the accept fd af…
30323 …* [#3937](https://github.com/apache/incubator-nuttx/pull/#3937) dns_recv_response: Fix IPv6 addres…
30324 …* [#4408](https://github.com/apache/incubator-nuttx/pull/#4408) Fix up that local socket will be e…
30325 …* [#4517](https://github.com/apache/incubator-nuttx/pull/#4517) rpmsg_socket: add prefix "rpmsg-so…
30326 …* [#4537](https://github.com/apache/incubator-nuttx/pull/#4537) net/udp: fix buffer release handli…
30327 …* [#4120](https://github.com/apache/incubator-nuttx/pull/#4120) net/tcp: tcp_sendfile need restore…
30328 …* [#4134](https://github.com/apache/incubator-nuttx/pull/#4134) net/tcp: only print the error when…
30329 …[#4142](https://github.com/apache/incubator-nuttx/pull/#4142) tcp_send_buffered: throttle IOB allo…
30330 …* [#4159](https://github.com/apache/incubator-nuttx/pull/#4159) tcp_send_buffered.c: Fix broken re…
30331 …* [#4126](https://github.com/apache/incubator-nuttx/pull/#4126) include/netinet: Add missing IP_TT…
30332 …* [#4197](https://github.com/apache/incubator-nuttx/pull/#4197) local/stream: remove preamble head…
30333 …* [#4273](https://github.com/apache/incubator-nuttx/pull/#4273) tcp: some fixes in snd_wnd process…
30334 …* [#4293](https://github.com/apache/incubator-nuttx/pull/#4293) tcp: make our sequence number a bi…
30335 * [#4257](https://github.com/apache/incubator-nuttx/pull/#4257) Fix a few deadlock in tcp/iob
30336 …* [#4480](https://github.com/apache/incubator-nuttx/pull/#4480) net: utils: Remove critical sectio…
30337 * [#3919](https://github.com/apache/incubator-nuttx/pull/#3919) tcp iob throttling related fixes
30348 |:------------------:| -----------------:|
30366 All in-tree boards have been updated, but users who maintain their own out-of-tree boards will have…
30368 See PR-4266 https://github.com/apache/incubator-nuttx/pull/4266 and PR-4267 https://github.com/apac…
30370 See also PR-820 https://github.com/apache/incubator-nuttx-apps/pull/820 and PR-821 https://github.c…
30379 See PR-4325 https://github.com/apache/incubator-nuttx/pull/4325
30385 …be prefixed with `-Wl,` (dash, capital W, lower-case L, comma). All boards in the NuttX tree have …
30387 The reason for this change is that GNU Binutils 2.36.x has added new error checking on command line…
30394 arm-none-eabi-ld: Error: unable to disambiguate: -nostartfiles (did you mean --nostartfiles ?)
30400 arm-none-eabi-gcc: error: unrecognized command line option '--gc-sections'; did you mean '--data-se…
30410 NXFLATLDFLAGS1 = -r -d -warn-common
30411 NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-secti…
30417 NXFLATLDFLAGS1 = -r -Wl,-d -Wl,-warn-common
30418 NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -Wl,-no-check-s…
30426 USER_LDFLAGS = --undefined=$(ENTRYPT) --entry=$(ENTRYPT) $(USER_LDSCRIPT)
30432 USER_LDFLAGS = -Wl,--undefined=$(ENTRYPT) -Wl,--entry=$(ENTRYPT) $(USER_LDSCRIPT) -nostartfiles -no…
30438 $(Q) $(LD) -o $@ $(USER_LDFLAGS) $(USER_LIBPATHS) $(OBJS) --start-group $(USER_LDLIBS) --end-group …
30444 $(Q) $(LD) -o $@ $(USER_LDFLAGS) $(USER_LIBPATHS) $(OBJS) -Wl,--start-group $(USER_LDLIBS) -Wl,--en…
30447 Depending on your board's customized build scripts, you may need to look out for other `make` varia…
30449 Some variables to look for:
30451 - `ARCHSCRIPT`
30452 - `ARCH_LIBS`
30453 - `CCLINKFLAGS`
30454 - `EXTRALINKCMDS`
30455 - `LDELFFLAGS`
30456 - `LDENDGROUP`
30457 - `LDFLAGS`
30458 - `LDLINKFLAGS`
30459 - `LDMODULEFLAGS`
30460 - `LDSTARTGROUP`
30461 - `NXFLATLDFLAGS1`
30462 - `NXFLATLDFLAGS2`
30463 - `USER_LDFLAGS`
30468 $(Q) $(LD) --entry=__start $(LDFLAGS) $(LIBPATHS) $(EXTRA_LIBPATHS) \
30474 $(LIBPATHS) "-(" $(LDLIBS) "-)" $(LDFLAGS) -Map="$(TOPDIR)$(DELIM)nuttx.map"
30477 In general, any command line options destined for LD must be prefixed with `-Wl,` (dash, capital W,…
30490 EXTRALINKCMDS += -Wl,@$(TOPDIR)/syscall/syscall_wraps.ldcmd
30496 LDFLAGS += -gc-sections
30502 LDFLAGS += -Wl,-gc-sections
30508 $(LIBPATHS) "-(" $(LDLIBS) "-)" $(LDFLAGS) -Map="$(TOPDIR)$(DELIM)nuttx.map"
30514 $(LIBPATHS) "-(" $(LDLIBS) "-)" $(LDFLAGS) -Wl,-Map="$(TOPDIR)$(DELIM)nuttx.map"
30520 NXFLATLDFLAGS1 = -r -d -warn-common
30526 NXFLATLDFLAGS1 = -r -Wl,-d -Wl,-warn-common
30533 LDFLAGS += -Map="${shell cygpath -w $(TOPDIR)/nuttx.map}" --cref
30535 LDFLAGS += -Map=$(TOPDIR)/nuttx.map --cref
30543 LDFLAGS += -Wl,-Map="${shell cygpath -w $(TOPDIR)/nuttx.map}" -Wl,--cref
30545 LDFLAGS += -Wl,-Map=$(TOPDIR)/nuttx.map -Wl,--cref
30566 - https://github.com/apache/incubator-nuttx/commit/45672c269db13f59bdaa417e564837e8bbb6c8c1
30567 * PR-3836 in the NuttX main repository:
30568 - https://github.com/apache/incubator-nuttx/pull/3836
30570 - https://github.com/apache/incubator-nuttx/issues/3209
30571 - https://github.com/apache/incubator-nuttx/issues/3826
30573 - https://sourceware.org/pipermail/binutils/2021-June/116826.html
30574 * Description of -Wl,option in the GCC manual:
30575 - https://gcc.gnu.org/onlinedocs/gcc/Link-Options.html