// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2019 BayLibre, SAS. * Author: Fabien Parent */ #include / { aliases { serial0 = &uart0; ethernet0 = ðernet; }; chosen { stdout-path = "serial0:921600n8"; }; firmware { optee: optee@4fd00000 { compatible = "linaro,optee-tz"; method = "smc"; }; }; gpio-keys { compatible = "gpio-keys"; input-name = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_default>; volume-up { gpios = <&pio 42 GPIO_ACTIVE_LOW>; label = "volume_up"; linux,code = <115>; wakeup-source; debounce-interval = <15>; }; volume-down { gpios = <&pio 43 GPIO_ACTIVE_LOW>; label = "volume_down"; linux,code = <114>; wakeup-source; debounce-interval = <15>; }; }; }; &i2c0 { clock-div = <2>; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; status = "okay"; tca6416: gpio@20 { compatible = "ti,tca6416"; reg = <0x20>; reset-gpios = <&pio 65 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&tca6416_pins>; gpio-controller; #gpio-cells = <2>; eint20_mux_sel0 { gpio-hog; gpios = <0 0>; input; line-name = "eint20_mux_sel0"; }; expcon_mux_sel1 { gpio-hog; gpios = <1 0>; input; line-name = "expcon_mux_sel1"; }; mrg_di_mux_sel2 { gpio-hog; gpios = <2 0>; input; line-name = "mrg_di_mux_sel2"; }; sd_sdio_mux_sel3 { gpio-hog; gpios = <3 0>; input; line-name = "sd_sdio_mux_sel3"; }; sd_sdio_mux_ctrl7 { gpio-hog; gpios = <7 0>; output-low; line-name = "sd_sdio_mux_ctrl7"; }; hw_id0 { gpio-hog; gpios = <8 0>; input; line-name = "hw_id0"; }; hw_id1 { gpio-hog; gpios = <9 0>; input; line-name = "hw_id1"; }; hw_id2 { gpio-hog; gpios = <10 0>; input; line-name = "hw_id2"; }; fg_int_n { gpio-hog; gpios = <11 0>; input; line-name = "fg_int_n"; }; usba_pwr_en { gpio-hog; gpios = <12 0>; output-high; line-name = "usba_pwr_en"; }; wifi_3v3_pg { gpio-hog; gpios = <13 0>; input; line-name = "wifi_3v3_pg"; }; cam_rst { gpio-hog; gpios = <14 0>; output-low; line-name = "cam_rst"; }; cam_pwdn { gpio-hog; gpios = <15 0>; output-low; line-name = "cam_pwdn"; }; }; }; &i2c2 { clock-div = <2>; pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &uart0 { status = "okay"; }; ðernet { pinctrl-names = "default"; pinctrl-0 = <ðernet_pins_default>; phy-handle = <ð_phy>; phy-mode = "rmii"; mac-address = [00 00 00 00 00 00]; status = "okay"; mdio { #address-cells = <1>; #size-cells = <0>; eth_phy: ethernet-phy@0 { reg = <0>; }; }; }; &usb0 { status = "okay"; dr_mode = "peripheral"; usb_con: connector { compatible = "usb-c-connector"; label = "USB-C"; }; }; &usb0_phy { status = "okay"; }; &pio { gpio_keys_default: gpiodefault { pins_cmd_dat { pinmux = , ; bias-pull-up; input-enable; }; }; i2c0_pins_a: i2c0@0 { pins1 { pinmux = , ; bias-disable; }; }; i2c2_pins_a: i2c2@0 { pins1 { pinmux = , ; bias-disable; }; }; tca6416_pins: pinmux_tca6416_pins { gpio_mux_rst_n_pin { pinmux = ; output-high; }; gpio_mux_int_n_pin { pinmux = ; input-enable; bias-pull-up; }; }; ethernet_pins_default: ethernet { pins_ethernet { pinmux = , , , , , , , , , ; }; }; };