Lines Matching refs:with

8 with "Type: Medium Changer" in /proc/scsi/scsi.
10 This is for *real* Jukeboxes.  It is *not* supported to work with
53 I implemented the driver as character device driver with a NetBSD-like
56 should be source code compatible with NetBSD. So if there is any
58 it should work with this driver too.
70 I test and use the driver myself with a 35 slot cdrom jukebox from
71 Grundig.  I got some reports telling it works ok with tape autoloaders
72 (Exabyte, HP and DEC).  Some People use this driver with amanda.  It
73 works fine with small (11 slots) and a huge (4 MOs, 88 slots)
74 magneto-optical Jukebox.  Probably with lots of other changers too, most
80 changer command set should work out-of-the-box with this driver.  If it
88 This is a character device with major number is 86, so use
99      (replace ID with the SCSI-ID of the device)
100   2) boot the kernel with "max_scsi_luns=1" on the command line
107 If you insmod the driver with "insmod debug=1", it will be verbose and
108 prints a lot of stuff to the syslog.  Compiling the kernel with
113 You can display these messages with the dmesg command (or check the
114 logfiles).  If you email me some question because of a problem with the