Lines Matching +full:codec +full:- +full:gpio7
1 // SPDX-License-Identifier: GPL-2.0-or-later
6 /dts-v1/;
7 #include <dt-bindings/gpio/gpio.h>
11 model = "Gateworks Ventana GW5400-A";
12 compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
33 compatible = "gpio-leds";
34 pinctrl-names = "default";
35 pinctrl-0 = <&pinctrl_gpio_leds>;
39 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */
40 default-state = "on";
41 linux,default-trigger = "heartbeat";
46 gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */
47 default-state = "off";
52 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */
53 default-state = "off";
63 compatible = "pps-gpio";
64 pinctrl-names = "default";
65 pinctrl-0 = <&pinctrl_gpio_leds>;
71 compatible = "simple-bus";
72 #address-cells = <1>;
73 #size-cells = <0>;
76 compatible = "regulator-fixed";
78 regulator-name = "1P0V";
79 regulator-min-microvolt = <1000000>;
80 regulator-max-microvolt = <1000000>;
81 regulator-always-on;
85 compatible = "regulator-fixed";
87 regulator-name = "3P3V";
88 regulator-min-microvolt = <3300000>;
89 regulator-max-microvolt = <3300000>;
90 regulator-always-on;
94 compatible = "regulator-fixed";
96 regulator-name = "usb_h1_vbus";
97 regulator-min-microvolt = <5000000>;
98 regulator-max-microvolt = <5000000>;
99 regulator-always-on;
103 compatible = "regulator-fixed";
105 regulator-name = "usb_otg_vbus";
106 regulator-min-microvolt = <5000000>;
107 regulator-max-microvolt = <5000000>;
109 enable-active-high;
114 compatible = "fsl,imx6q-ventana-sgtl5000",
115 "fsl,imx-audio-sgtl5000";
116 model = "sgtl5000-audio";
117 ssi-controller = <&ssi1>;
118 audio-codec = <&codec>;
119 audio-routing =
123 mux-int-port = <1>;
124 mux-ext-port = <4>;
129 pinctrl-names = "default";
130 pinctrl-0 = <&pinctrl_audmux>;
135 cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
136 pinctrl-names = "default";
137 pinctrl-0 = <&pinctrl_ecspi1>;
141 compatible = "sst,w25q256", "jedec,spi-nor";
142 spi-max-frequency = <30000000>;
148 pinctrl-names = "default";
149 pinctrl-0 = <&pinctrl_enet>;
150 phy-mode = "rgmii-id";
151 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
156 ddc-i2c-bus = <&i2c3>;
161 clock-frequency = <100000>;
162 pinctrl-names = "default";
163 pinctrl-0 = <&pinctrl_i2c1>;
193 gpio-controller;
194 #gpio-cells = <2>;
204 clock-frequency = <100000>;
205 pinctrl-names = "default";
206 pinctrl-0 = <&pinctrl_i2c2>;
215 regulator-min-microvolt = <300000>;
216 regulator-max-microvolt = <1875000>;
217 regulator-boot-on;
218 regulator-always-on;
219 regulator-ramp-delay = <6250>;
223 regulator-min-microvolt = <300000>;
224 regulator-max-microvolt = <1875000>;
225 regulator-boot-on;
226 regulator-always-on;
227 regulator-ramp-delay = <6250>;
231 regulator-min-microvolt = <800000>;
232 regulator-max-microvolt = <3950000>;
233 regulator-boot-on;
234 regulator-always-on;
238 regulator-min-microvolt = <400000>;
239 regulator-max-microvolt = <1975000>;
240 regulator-boot-on;
241 regulator-always-on;
245 regulator-min-microvolt = <400000>;
246 regulator-max-microvolt = <1975000>;
247 regulator-boot-on;
248 regulator-always-on;
252 regulator-min-microvolt = <800000>;
253 regulator-max-microvolt = <3300000>;
257 regulator-min-microvolt = <5000000>;
258 regulator-max-microvolt = <5150000>;
262 regulator-min-microvolt = <1000000>;
263 regulator-max-microvolt = <3000000>;
264 regulator-boot-on;
265 regulator-always-on;
269 regulator-boot-on;
270 regulator-always-on;
274 regulator-min-microvolt = <800000>;
275 regulator-max-microvolt = <1550000>;
279 regulator-min-microvolt = <800000>;
280 regulator-max-microvolt = <1550000>;
284 regulator-min-microvolt = <1800000>;
285 regulator-max-microvolt = <3300000>;
289 regulator-min-microvolt = <1800000>;
290 regulator-max-microvolt = <3300000>;
291 regulator-always-on;
295 regulator-min-microvolt = <1800000>;
296 regulator-max-microvolt = <3300000>;
297 regulator-always-on;
301 regulator-min-microvolt = <1800000>;
302 regulator-max-microvolt = <3300000>;
303 regulator-always-on;
310 clock-frequency = <100000>;
311 pinctrl-names = "default";
312 pinctrl-0 = <&pinctrl_i2c3>;
320 codec: sgtl5000@a { label
324 VDDA-supply = <&sw4_reg>;
325 VDDIO-supply = <®_3p3v>;
331 interrupt-parent = <&gpio7>;
333 wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
342 reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
351 pinctrl-names = "default";
352 pinctrl-0 = <&pinctrl_uart1>;
357 pinctrl-names = "default";
358 pinctrl-0 = <&pinctrl_uart2>;
363 pinctrl-names = "default";
364 pinctrl-0 = <&pinctrl_uart5>;
369 vbus-supply = <®_usb_otg_vbus>;
370 pinctrl-names = "default";
371 pinctrl-0 = <&pinctrl_usbotg>;
372 disable-over-current;
377 vbus-supply = <®_usb_h1_vbus>;
382 pinctrl-names = "default";
383 pinctrl-0 = <&pinctrl_usdhc3>;
384 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
385 vmmc-supply = <®_3p3v>;