1 /* SPDX-License-Identifier: GPL-2.0-only */ 2 /******************************************************************************* 3 Copyright (C) 2007-2009 STMicroelectronics Ltd 4 5 6 Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> 7 *******************************************************************************/ 8 #ifndef __DWMAC1000_H__ 9 #define __DWMAC1000_H__ 10 11 #include <linux/phy.h> 12 #include "common.h" 13 14 #define GMAC_CONTROL 0x00000000 /* Configuration */ 15 #define GMAC_FRAME_FILTER 0x00000004 /* Frame Filter */ 16 #define GMAC_HASH_HIGH 0x00000008 /* Multicast Hash Table High */ 17 #define GMAC_HASH_LOW 0x0000000c /* Multicast Hash Table Low */ 18 #define GMAC_MII_ADDR 0x00000010 /* MII Address */ 19 #define GMAC_MII_DATA 0x00000014 /* MII Data */ 20 #define GMAC_FLOW_CTRL 0x00000018 /* Flow Control */ 21 #define GMAC_VLAN_TAG 0x0000001c /* VLAN Tag */ 22 #define GMAC_DEBUG 0x00000024 /* GMAC debug register */ 23 #define GMAC_WAKEUP_FILTER 0x00000028 /* Wake-up Frame Filter */ 24 25 #define GMAC_INT_STATUS 0x00000038 /* interrupt status register */ 26 #define GMAC_INT_STATUS_PMT BIT(3) 27 #define GMAC_INT_STATUS_MMCIS BIT(4) 28 #define GMAC_INT_STATUS_MMCRIS BIT(5) 29 #define GMAC_INT_STATUS_MMCTIS BIT(6) 30 #define GMAC_INT_STATUS_MMCCSUM BIT(7) 31 #define GMAC_INT_STATUS_TSTAMP BIT(9) 32 #define GMAC_INT_STATUS_LPIIS BIT(10) 33 34 /* interrupt mask register */ 35 #define GMAC_INT_MASK 0x0000003c 36 #define GMAC_INT_DISABLE_RGMII BIT(0) 37 #define GMAC_INT_DISABLE_PCSLINK BIT(1) 38 #define GMAC_INT_DISABLE_PCSAN BIT(2) 39 #define GMAC_INT_DISABLE_PMT BIT(3) 40 #define GMAC_INT_DISABLE_TIMESTAMP BIT(9) 41 #define GMAC_INT_DISABLE_PCS (GMAC_INT_DISABLE_RGMII | \ 42 GMAC_INT_DISABLE_PCSLINK | \ 43 GMAC_INT_DISABLE_PCSAN) 44 #define GMAC_INT_DEFAULT_MASK (GMAC_INT_DISABLE_TIMESTAMP | \ 45 GMAC_INT_DISABLE_PCS) 46 47 /* PMT Control and Status */ 48 #define GMAC_PMT 0x0000002c 49 enum power_event { 50 pointer_reset = 0x80000000, 51 global_unicast = 0x00000200, 52 wake_up_rx_frame = 0x00000040, 53 magic_frame = 0x00000020, 54 wake_up_frame_en = 0x00000004, 55 magic_pkt_en = 0x00000002, 56 power_down = 0x00000001, 57 }; 58 59 /* Energy Efficient Ethernet (EEE) 60 * 61 * LPI status, timer and control register offset 62 */ 63 #define LPI_CTRL_STATUS 0x0030 64 #define LPI_TIMER_CTRL 0x0034 65 66 /* LPI control and status defines */ 67 #define LPI_CTRL_STATUS_LPITXA 0x00080000 /* Enable LPI TX Automate */ 68 #define LPI_CTRL_STATUS_PLSEN 0x00040000 /* Enable PHY Link Status */ 69 #define LPI_CTRL_STATUS_PLS 0x00020000 /* PHY Link Status */ 70 #define LPI_CTRL_STATUS_LPIEN 0x00010000 /* LPI Enable */ 71 #define LPI_CTRL_STATUS_RLPIST 0x00000200 /* Receive LPI state */ 72 #define LPI_CTRL_STATUS_TLPIST 0x00000100 /* Transmit LPI state */ 73 #define LPI_CTRL_STATUS_RLPIEX 0x00000008 /* Receive LPI Exit */ 74 #define LPI_CTRL_STATUS_RLPIEN 0x00000004 /* Receive LPI Entry */ 75 #define LPI_CTRL_STATUS_TLPIEX 0x00000002 /* Transmit LPI Exit */ 76 #define LPI_CTRL_STATUS_TLPIEN 0x00000001 /* Transmit LPI Entry */ 77 78 /* GMAC HW ADDR regs */ 79 #define GMAC_ADDR_HIGH(reg) ((reg > 15) ? 0x00000800 + (reg - 16) * 8 : \ 80 0x00000040 + (reg * 8)) 81 #define GMAC_ADDR_LOW(reg) ((reg > 15) ? 0x00000804 + (reg - 16) * 8 : \ 82 0x00000044 + (reg * 8)) 83 #define GMAC_MAX_PERFECT_ADDRESSES 1 84 85 #define GMAC_PCS_BASE 0x000000c0 /* PCS register base */ 86 #define GMAC_RGSMIIIS 0x000000d8 /* RGMII/SMII status */ 87 88 /* SGMII/RGMII status register */ 89 #define GMAC_RGSMIIIS_LNKMODE BIT(0) 90 #define GMAC_RGSMIIIS_SPEED GENMASK(2, 1) 91 #define GMAC_RGSMIIIS_SPEED_SHIFT 1 92 #define GMAC_RGSMIIIS_LNKSTS BIT(3) 93 #define GMAC_RGSMIIIS_JABTO BIT(4) 94 #define GMAC_RGSMIIIS_FALSECARDET BIT(5) 95 #define GMAC_RGSMIIIS_SMIDRXS BIT(16) 96 /* LNKMOD */ 97 #define GMAC_RGSMIIIS_LNKMOD_MASK 0x1 98 /* LNKSPEED */ 99 #define GMAC_RGSMIIIS_SPEED_125 0x2 100 #define GMAC_RGSMIIIS_SPEED_25 0x1 101 #define GMAC_RGSMIIIS_SPEED_2_5 0x0 102 103 /* GMAC Configuration defines */ 104 #define GMAC_CONTROL_2K 0x08000000 /* IEEE 802.3as 2K packets */ 105 #define GMAC_CONTROL_TC 0x01000000 /* Transmit Conf. in RGMII/SGMII */ 106 #define GMAC_CONTROL_WD 0x00800000 /* Disable Watchdog on receive */ 107 #define GMAC_CONTROL_JD 0x00400000 /* Jabber disable */ 108 #define GMAC_CONTROL_BE 0x00200000 /* Frame Burst Enable */ 109 #define GMAC_CONTROL_JE 0x00100000 /* Jumbo frame */ 110 enum inter_frame_gap { 111 GMAC_CONTROL_IFG_88 = 0x00040000, 112 GMAC_CONTROL_IFG_80 = 0x00020000, 113 GMAC_CONTROL_IFG_40 = 0x000e0000, 114 }; 115 #define GMAC_CONTROL_DCRS 0x00010000 /* Disable carrier sense */ 116 #define GMAC_CONTROL_PS 0x00008000 /* Port Select 0:GMI 1:MII */ 117 #define GMAC_CONTROL_FES 0x00004000 /* Speed 0:10 1:100 */ 118 #define GMAC_CONTROL_DO 0x00002000 /* Disable Rx Own */ 119 #define GMAC_CONTROL_LM 0x00001000 /* Loop-back mode */ 120 #define GMAC_CONTROL_DM 0x00000800 /* Duplex Mode */ 121 #define GMAC_CONTROL_IPC 0x00000400 /* Checksum Offload */ 122 #define GMAC_CONTROL_DR 0x00000200 /* Disable Retry */ 123 #define GMAC_CONTROL_LUD 0x00000100 /* Link up/down */ 124 #define GMAC_CONTROL_ACS 0x00000080 /* Auto Pad/FCS Stripping */ 125 #define GMAC_CONTROL_DC 0x00000010 /* Deferral Check */ 126 #define GMAC_CONTROL_TE 0x00000008 /* Transmitter Enable */ 127 #define GMAC_CONTROL_RE 0x00000004 /* Receiver Enable */ 128 129 #define GMAC_CORE_INIT (GMAC_CONTROL_JD | GMAC_CONTROL_PS | GMAC_CONTROL_ACS | \ 130 GMAC_CONTROL_BE | GMAC_CONTROL_DCRS) 131 132 /* GMAC Frame Filter defines */ 133 #define GMAC_FRAME_FILTER_PR 0x00000001 /* Promiscuous Mode */ 134 #define GMAC_FRAME_FILTER_HUC 0x00000002 /* Hash Unicast */ 135 #define GMAC_FRAME_FILTER_HMC 0x00000004 /* Hash Multicast */ 136 #define GMAC_FRAME_FILTER_DAIF 0x00000008 /* DA Inverse Filtering */ 137 #define GMAC_FRAME_FILTER_PM 0x00000010 /* Pass all multicast */ 138 #define GMAC_FRAME_FILTER_DBF 0x00000020 /* Disable Broadcast frames */ 139 #define GMAC_FRAME_FILTER_PCF 0x00000080 /* Pass Control frames */ 140 #define GMAC_FRAME_FILTER_SAIF 0x00000100 /* Inverse Filtering */ 141 #define GMAC_FRAME_FILTER_SAF 0x00000200 /* Source Address Filter */ 142 #define GMAC_FRAME_FILTER_HPF 0x00000400 /* Hash or perfect Filter */ 143 #define GMAC_FRAME_FILTER_RA 0x80000000 /* Receive all mode */ 144 /* GMII ADDR defines */ 145 #define GMAC_MII_ADDR_WRITE 0x00000002 /* MII Write */ 146 #define GMAC_MII_ADDR_BUSY 0x00000001 /* MII Busy */ 147 /* GMAC FLOW CTRL defines */ 148 #define GMAC_FLOW_CTRL_PT_MASK 0xffff0000 /* Pause Time Mask */ 149 #define GMAC_FLOW_CTRL_PT_SHIFT 16 150 #define GMAC_FLOW_CTRL_UP 0x00000008 /* Unicast pause frame enable */ 151 #define GMAC_FLOW_CTRL_RFE 0x00000004 /* Rx Flow Control Enable */ 152 #define GMAC_FLOW_CTRL_TFE 0x00000002 /* Tx Flow Control Enable */ 153 #define GMAC_FLOW_CTRL_FCB_BPA 0x00000001 /* Flow Control Busy ... */ 154 155 /* DEBUG Register defines */ 156 /* MTL TxStatus FIFO */ 157 #define GMAC_DEBUG_TXSTSFSTS BIT(25) /* MTL TxStatus FIFO Full Status */ 158 #define GMAC_DEBUG_TXFSTS BIT(24) /* MTL Tx FIFO Not Empty Status */ 159 #define GMAC_DEBUG_TWCSTS BIT(22) /* MTL Tx FIFO Write Controller */ 160 /* MTL Tx FIFO Read Controller Status */ 161 #define GMAC_DEBUG_TRCSTS_MASK GENMASK(21, 20) 162 #define GMAC_DEBUG_TRCSTS_SHIFT 20 163 #define GMAC_DEBUG_TRCSTS_IDLE 0 164 #define GMAC_DEBUG_TRCSTS_READ 1 165 #define GMAC_DEBUG_TRCSTS_TXW 2 166 #define GMAC_DEBUG_TRCSTS_WRITE 3 167 #define GMAC_DEBUG_TXPAUSED BIT(19) /* MAC Transmitter in PAUSE */ 168 /* MAC Transmit Frame Controller Status */ 169 #define GMAC_DEBUG_TFCSTS_MASK GENMASK(18, 17) 170 #define GMAC_DEBUG_TFCSTS_SHIFT 17 171 #define GMAC_DEBUG_TFCSTS_IDLE 0 172 #define GMAC_DEBUG_TFCSTS_WAIT 1 173 #define GMAC_DEBUG_TFCSTS_GEN_PAUSE 2 174 #define GMAC_DEBUG_TFCSTS_XFER 3 175 /* MAC GMII or MII Transmit Protocol Engine Status */ 176 #define GMAC_DEBUG_TPESTS BIT(16) 177 #define GMAC_DEBUG_RXFSTS_MASK GENMASK(9, 8) /* MTL Rx FIFO Fill-level */ 178 #define GMAC_DEBUG_RXFSTS_SHIFT 8 179 #define GMAC_DEBUG_RXFSTS_EMPTY 0 180 #define GMAC_DEBUG_RXFSTS_BT 1 181 #define GMAC_DEBUG_RXFSTS_AT 2 182 #define GMAC_DEBUG_RXFSTS_FULL 3 183 #define GMAC_DEBUG_RRCSTS_MASK GENMASK(6, 5) /* MTL Rx FIFO Read Controller */ 184 #define GMAC_DEBUG_RRCSTS_SHIFT 5 185 #define GMAC_DEBUG_RRCSTS_IDLE 0 186 #define GMAC_DEBUG_RRCSTS_RDATA 1 187 #define GMAC_DEBUG_RRCSTS_RSTAT 2 188 #define GMAC_DEBUG_RRCSTS_FLUSH 3 189 #define GMAC_DEBUG_RWCSTS BIT(4) /* MTL Rx FIFO Write Controller Active */ 190 /* MAC Receive Frame Controller FIFO Status */ 191 #define GMAC_DEBUG_RFCFCSTS_MASK GENMASK(2, 1) 192 #define GMAC_DEBUG_RFCFCSTS_SHIFT 1 193 /* MAC GMII or MII Receive Protocol Engine Status */ 194 #define GMAC_DEBUG_RPESTS BIT(0) 195 196 /*--- DMA BLOCK defines ---*/ 197 /* DMA Bus Mode register defines */ 198 #define DMA_BUS_MODE_DA 0x00000002 /* Arbitration scheme */ 199 #define DMA_BUS_MODE_DSL_MASK 0x0000007c /* Descriptor Skip Length */ 200 #define DMA_BUS_MODE_DSL_SHIFT 2 /* (in DWORDS) */ 201 /* Programmable burst length (passed thorugh platform)*/ 202 #define DMA_BUS_MODE_PBL_MASK 0x00003f00 /* Programmable Burst Len */ 203 #define DMA_BUS_MODE_PBL_SHIFT 8 204 #define DMA_BUS_MODE_ATDS 0x00000080 /* Alternate Descriptor Size */ 205 206 enum rx_tx_priority_ratio { 207 double_ratio = 0x00004000, /* 2:1 */ 208 triple_ratio = 0x00008000, /* 3:1 */ 209 quadruple_ratio = 0x0000c000, /* 4:1 */ 210 }; 211 212 #define DMA_BUS_MODE_FB 0x00010000 /* Fixed burst */ 213 #define DMA_BUS_MODE_MB 0x04000000 /* Mixed burst */ 214 #define DMA_BUS_MODE_RPBL_MASK 0x007e0000 /* Rx-Programmable Burst Len */ 215 #define DMA_BUS_MODE_RPBL_SHIFT 17 216 #define DMA_BUS_MODE_USP 0x00800000 217 #define DMA_BUS_MODE_MAXPBL 0x01000000 218 #define DMA_BUS_MODE_AAL 0x02000000 219 220 /* DMA CRS Control and Status Register Mapping */ 221 #define DMA_HOST_TX_DESC 0x00001048 /* Current Host Tx descriptor */ 222 #define DMA_HOST_RX_DESC 0x0000104c /* Current Host Rx descriptor */ 223 /* DMA Bus Mode register defines */ 224 #define DMA_BUS_PR_RATIO_MASK 0x0000c000 /* Rx/Tx priority ratio */ 225 #define DMA_BUS_PR_RATIO_SHIFT 14 226 #define DMA_BUS_FB 0x00010000 /* Fixed Burst */ 227 228 /* DMA operation mode defines (start/stop tx/rx are placed in common header)*/ 229 /* Disable Drop TCP/IP csum error */ 230 #define DMA_CONTROL_DT 0x04000000 231 #define DMA_CONTROL_RSF 0x02000000 /* Receive Store and Forward */ 232 #define DMA_CONTROL_DFF 0x01000000 /* Disaable flushing */ 233 /* Threshold for Activating the FC */ 234 enum rfa { 235 act_full_minus_1 = 0x00800000, 236 act_full_minus_2 = 0x00800200, 237 act_full_minus_3 = 0x00800400, 238 act_full_minus_4 = 0x00800600, 239 }; 240 /* Threshold for Deactivating the FC */ 241 enum rfd { 242 deac_full_minus_1 = 0x00400000, 243 deac_full_minus_2 = 0x00400800, 244 deac_full_minus_3 = 0x00401000, 245 deac_full_minus_4 = 0x00401800, 246 }; 247 #define DMA_CONTROL_TSF 0x00200000 /* Transmit Store and Forward */ 248 249 enum ttc_control { 250 DMA_CONTROL_TTC_64 = 0x00000000, 251 DMA_CONTROL_TTC_128 = 0x00004000, 252 DMA_CONTROL_TTC_192 = 0x00008000, 253 DMA_CONTROL_TTC_256 = 0x0000c000, 254 DMA_CONTROL_TTC_40 = 0x00010000, 255 DMA_CONTROL_TTC_32 = 0x00014000, 256 DMA_CONTROL_TTC_24 = 0x00018000, 257 DMA_CONTROL_TTC_16 = 0x0001c000, 258 }; 259 #define DMA_CONTROL_TC_TX_MASK 0xfffe3fff 260 261 #define DMA_CONTROL_EFC 0x00000100 262 #define DMA_CONTROL_FEF 0x00000080 263 #define DMA_CONTROL_FUF 0x00000040 264 265 /* Receive flow control activation field 266 * RFA field in DMA control register, bits 23,10:9 267 */ 268 #define DMA_CONTROL_RFA_MASK 0x00800600 269 270 /* Receive flow control deactivation field 271 * RFD field in DMA control register, bits 22,12:11 272 */ 273 #define DMA_CONTROL_RFD_MASK 0x00401800 274 275 /* RFD and RFA fields are encoded as follows 276 * 277 * Bit Field 278 * 0,00 - Full minus 1KB (only valid when rxfifo >= 4KB and EFC enabled) 279 * 0,01 - Full minus 2KB (only valid when rxfifo >= 4KB and EFC enabled) 280 * 0,10 - Full minus 3KB (only valid when rxfifo >= 4KB and EFC enabled) 281 * 0,11 - Full minus 4KB (only valid when rxfifo > 4KB and EFC enabled) 282 * 1,00 - Full minus 5KB (only valid when rxfifo > 8KB and EFC enabled) 283 * 1,01 - Full minus 6KB (only valid when rxfifo > 8KB and EFC enabled) 284 * 1,10 - Full minus 7KB (only valid when rxfifo > 8KB and EFC enabled) 285 * 1,11 - Reserved 286 * 287 * RFD should always be > RFA for a given FIFO size. RFD == RFA may work, 288 * but packet throughput performance may not be as expected. 289 * 290 * Be sure that bit 3 in GMAC Register 6 is set for Unicast Pause frame 291 * detection (IEEE Specification Requirement, Annex 31B, 31B.1, Pause 292 * Description). 293 * 294 * Be sure that DZPA (bit 7 in Flow Control Register, GMAC Register 6), 295 * is set to 0. This allows pause frames with a quanta of 0 to be sent 296 * as an XOFF message to the link peer. 297 */ 298 299 #define RFA_FULL_MINUS_1K 0x00000000 300 #define RFA_FULL_MINUS_2K 0x00000200 301 #define RFA_FULL_MINUS_3K 0x00000400 302 #define RFA_FULL_MINUS_4K 0x00000600 303 #define RFA_FULL_MINUS_5K 0x00800000 304 #define RFA_FULL_MINUS_6K 0x00800200 305 #define RFA_FULL_MINUS_7K 0x00800400 306 307 #define RFD_FULL_MINUS_1K 0x00000000 308 #define RFD_FULL_MINUS_2K 0x00000800 309 #define RFD_FULL_MINUS_3K 0x00001000 310 #define RFD_FULL_MINUS_4K 0x00001800 311 #define RFD_FULL_MINUS_5K 0x00400000 312 #define RFD_FULL_MINUS_6K 0x00400800 313 #define RFD_FULL_MINUS_7K 0x00401000 314 315 enum rtc_control { 316 DMA_CONTROL_RTC_64 = 0x00000000, 317 DMA_CONTROL_RTC_32 = 0x00000008, 318 DMA_CONTROL_RTC_96 = 0x00000010, 319 DMA_CONTROL_RTC_128 = 0x00000018, 320 }; 321 #define DMA_CONTROL_TC_RX_MASK 0xffffffe7 322 323 #define DMA_CONTROL_OSF 0x00000004 /* Operate on second frame */ 324 325 /* MMC registers offset */ 326 #define GMAC_MMC_CTRL 0x100 327 #define GMAC_MMC_RX_INTR 0x104 328 #define GMAC_MMC_TX_INTR 0x108 329 #define GMAC_MMC_RX_CSUM_OFFLOAD 0x208 330 #define GMAC_EXTHASH_BASE 0x500 331 332 extern const struct stmmac_dma_ops dwmac1000_dma_ops; 333 #endif /* __DWMAC1000_H__ */ 334