1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef ASM_CELL_PIC_H 3 #define ASM_CELL_PIC_H 4 #ifdef __KERNEL__ 5 /* 6 * Mapping of IIC pending bits into per-node interrupt numbers. 7 * 8 * Interrupt numbers are in the range 0...0x1ff where the top bit 9 * (0x100) represent the source node. Only 2 nodes are supported with 10 * the current code though it's trivial to extend that if necessary using 11 * higher level bits 12 * 13 * The bottom 8 bits are split into 2 type bits and 6 data bits that 14 * depend on the type: 15 * 16 * 00 (0x00 | data) : normal interrupt. data is (class << 4) | source 17 * 01 (0x40 | data) : IO exception. data is the exception number as 18 * defined by bit numbers in IIC_SR 19 * 10 (0x80 | data) : IPI. data is the IPI number (obtained from the priority) 20 * and node is always 0 (IPIs are per-cpu, their source is 21 * not relevant) 22 * 11 (0xc0 | data) : reserved 23 * 24 * In addition, interrupt number 0x80000000 is defined as always invalid 25 * (that is the node field is expected to never extend to move than 23 bits) 26 * 27 */ 28 29 enum { 30 IIC_IRQ_INVALID = 0x80000000u, 31 IIC_IRQ_NODE_MASK = 0x100, 32 IIC_IRQ_NODE_SHIFT = 8, 33 IIC_IRQ_MAX = 0x1ff, 34 IIC_IRQ_TYPE_MASK = 0xc0, 35 IIC_IRQ_TYPE_NORMAL = 0x00, 36 IIC_IRQ_TYPE_IOEXC = 0x40, 37 IIC_IRQ_TYPE_IPI = 0x80, 38 IIC_IRQ_CLASS_SHIFT = 4, 39 IIC_IRQ_CLASS_0 = 0x00, 40 IIC_IRQ_CLASS_1 = 0x10, 41 IIC_IRQ_CLASS_2 = 0x20, 42 IIC_SOURCE_COUNT = 0x200, 43 44 /* Here are defined the various source/dest units. Avoid using those 45 * definitions if you can, they are mostly here for reference 46 */ 47 IIC_UNIT_SPU_0 = 0x4, 48 IIC_UNIT_SPU_1 = 0x7, 49 IIC_UNIT_SPU_2 = 0x3, 50 IIC_UNIT_SPU_3 = 0x8, 51 IIC_UNIT_SPU_4 = 0x2, 52 IIC_UNIT_SPU_5 = 0x9, 53 IIC_UNIT_SPU_6 = 0x1, 54 IIC_UNIT_SPU_7 = 0xa, 55 IIC_UNIT_IOC_0 = 0x0, 56 IIC_UNIT_IOC_1 = 0xb, 57 IIC_UNIT_THREAD_0 = 0xe, /* target only */ 58 IIC_UNIT_THREAD_1 = 0xf, /* target only */ 59 IIC_UNIT_IIC = 0xe, /* source only (IO exceptions) */ 60 61 /* Base numbers for the external interrupts */ 62 IIC_IRQ_EXT_IOIF0 = 63 IIC_IRQ_TYPE_NORMAL | IIC_IRQ_CLASS_2 | IIC_UNIT_IOC_0, 64 IIC_IRQ_EXT_IOIF1 = 65 IIC_IRQ_TYPE_NORMAL | IIC_IRQ_CLASS_2 | IIC_UNIT_IOC_1, 66 67 /* Base numbers for the IIC_ISR interrupts */ 68 IIC_IRQ_IOEX_TMI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 63, 69 IIC_IRQ_IOEX_PMI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 62, 70 IIC_IRQ_IOEX_ATI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 61, 71 IIC_IRQ_IOEX_MATBFI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 60, 72 IIC_IRQ_IOEX_ELDI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 59, 73 74 /* Which bits in IIC_ISR are edge sensitive */ 75 IIC_ISR_EDGE_MASK = 0x4ul, 76 }; 77 78 extern void iic_init_IRQ(void); 79 extern void iic_message_pass(int cpu, int msg); 80 extern void iic_request_IPIs(void); 81 extern void iic_setup_cpu(void); 82 83 extern u8 iic_get_target_id(int cpu); 84 85 extern void spider_init_IRQ(void); 86 87 extern void iic_set_interrupt_routing(int cpu, int thread, int priority); 88 89 #endif 90 #endif /* ASM_CELL_PIC_H */ 91