1 2 /* SPDX-License-Identifier: GPL-2.0-only */ 3 /* 4 * Copyright 2016 Broadcom 5 */ 6 7 #ifndef _CIPHER_H 8 #define _CIPHER_H 9 10 #include <linux/atomic.h> 11 #include <linux/mailbox/brcm-message.h> 12 #include <linux/mailbox_client.h> 13 #include <crypto/aes.h> 14 #include <crypto/internal/hash.h> 15 #include <crypto/internal/skcipher.h> 16 #include <crypto/aead.h> 17 #include <crypto/arc4.h> 18 #include <crypto/gcm.h> 19 #include <crypto/sha.h> 20 #include <crypto/sha3.h> 21 22 #include "spu.h" 23 #include "spum.h" 24 #include "spu2.h" 25 26 /* Driver supports up to MAX_SPUS SPU blocks */ 27 #define MAX_SPUS 16 28 29 #define ARC4_STATE_SIZE 4 30 31 #define CCM_AES_IV_SIZE 16 32 #define CCM_ESP_IV_SIZE 8 33 #define RFC4543_ICV_SIZE 16 34 35 #define MAX_KEY_SIZE ARC4_MAX_KEY_SIZE 36 #define MAX_IV_SIZE AES_BLOCK_SIZE 37 #define MAX_DIGEST_SIZE SHA3_512_DIGEST_SIZE 38 #define MAX_ASSOC_SIZE 512 39 40 /* size of salt value for AES-GCM-ESP and AES-CCM-ESP */ 41 #define GCM_ESP_SALT_SIZE 4 42 #define CCM_ESP_SALT_SIZE 3 43 #define MAX_SALT_SIZE GCM_ESP_SALT_SIZE 44 #define GCM_ESP_SALT_OFFSET 0 45 #define CCM_ESP_SALT_OFFSET 1 46 47 #define GCM_ESP_DIGESTSIZE 16 48 49 #define MAX_HASH_BLOCK_SIZE SHA512_BLOCK_SIZE 50 51 /* 52 * Maximum number of bytes from a non-final hash request that can be deferred 53 * until more data is available. With new crypto API framework, this 54 * can be no more than one block of data. 55 */ 56 #define HASH_CARRY_MAX MAX_HASH_BLOCK_SIZE 57 58 /* Force at least 4-byte alignment of all SPU message fields */ 59 #define SPU_MSG_ALIGN 4 60 61 /* Number of times to resend mailbox message if mb queue is full */ 62 #define SPU_MB_RETRY_MAX 1000 63 64 /* op_counts[] indexes */ 65 enum op_type { 66 SPU_OP_CIPHER, 67 SPU_OP_HASH, 68 SPU_OP_HMAC, 69 SPU_OP_AEAD, 70 SPU_OP_NUM 71 }; 72 73 enum spu_spu_type { 74 SPU_TYPE_SPUM, 75 SPU_TYPE_SPU2, 76 }; 77 78 /* 79 * SPUM_NS2 and SPUM_NSP are the SPU-M block on Northstar 2 and Northstar Plus, 80 * respectively. 81 */ 82 enum spu_spu_subtype { 83 SPU_SUBTYPE_SPUM_NS2, 84 SPU_SUBTYPE_SPUM_NSP, 85 SPU_SUBTYPE_SPU2_V1, 86 SPU_SUBTYPE_SPU2_V2 87 }; 88 89 struct spu_type_subtype { 90 enum spu_spu_type type; 91 enum spu_spu_subtype subtype; 92 }; 93 94 struct cipher_op { 95 enum spu_cipher_alg alg; 96 enum spu_cipher_mode mode; 97 }; 98 99 struct auth_op { 100 enum hash_alg alg; 101 enum hash_mode mode; 102 }; 103 104 struct iproc_alg_s { 105 u32 type; 106 union { 107 struct skcipher_alg skcipher; 108 struct ahash_alg hash; 109 struct aead_alg aead; 110 } alg; 111 struct cipher_op cipher_info; 112 struct auth_op auth_info; 113 bool auth_first; 114 bool registered; 115 }; 116 117 /* 118 * Buffers for a SPU request/reply message pair. All part of one structure to 119 * allow a single alloc per request. 120 */ 121 struct spu_msg_buf { 122 /* Request message fragments */ 123 124 /* 125 * SPU request message header. For SPU-M, holds MH, EMH, SCTX, BDESC, 126 * and BD header. For SPU2, holds FMD, OMD. 127 */ 128 u8 bcm_spu_req_hdr[ALIGN(SPU2_HEADER_ALLOC_LEN, SPU_MSG_ALIGN)]; 129 130 /* IV or counter. Size to include salt. Also used for XTS tweek. */ 131 u8 iv_ctr[ALIGN(2 * AES_BLOCK_SIZE, SPU_MSG_ALIGN)]; 132 133 /* Hash digest. request and response. */ 134 u8 digest[ALIGN(MAX_DIGEST_SIZE, SPU_MSG_ALIGN)]; 135 136 /* SPU request message padding */ 137 u8 spu_req_pad[ALIGN(SPU_PAD_LEN_MAX, SPU_MSG_ALIGN)]; 138 139 /* SPU-M request message STATUS field */ 140 u8 tx_stat[ALIGN(SPU_TX_STATUS_LEN, SPU_MSG_ALIGN)]; 141 142 /* Response message fragments */ 143 144 /* SPU response message header */ 145 u8 spu_resp_hdr[ALIGN(SPU2_HEADER_ALLOC_LEN, SPU_MSG_ALIGN)]; 146 147 /* SPU response message STATUS field padding */ 148 u8 rx_stat_pad[ALIGN(SPU_STAT_PAD_MAX, SPU_MSG_ALIGN)]; 149 150 /* SPU response message STATUS field */ 151 u8 rx_stat[ALIGN(SPU_RX_STATUS_LEN, SPU_MSG_ALIGN)]; 152 153 union { 154 /* Buffers only used for skcipher */ 155 struct { 156 /* 157 * Field used for either SUPDT when RC4 is used 158 * -OR- tweak value when XTS/AES is used 159 */ 160 u8 supdt_tweak[ALIGN(SPU_SUPDT_LEN, SPU_MSG_ALIGN)]; 161 } c; 162 163 /* Buffers only used for aead */ 164 struct { 165 /* SPU response pad for GCM data */ 166 u8 gcmpad[ALIGN(AES_BLOCK_SIZE, SPU_MSG_ALIGN)]; 167 168 /* SPU request msg padding for GCM AAD */ 169 u8 req_aad_pad[ALIGN(SPU_PAD_LEN_MAX, SPU_MSG_ALIGN)]; 170 171 /* SPU response data to be discarded */ 172 u8 resp_aad[ALIGN(MAX_ASSOC_SIZE + MAX_IV_SIZE, 173 SPU_MSG_ALIGN)]; 174 } a; 175 }; 176 }; 177 178 struct iproc_ctx_s { 179 u8 enckey[MAX_KEY_SIZE + ARC4_STATE_SIZE]; 180 unsigned int enckeylen; 181 182 u8 authkey[MAX_KEY_SIZE + ARC4_STATE_SIZE]; 183 unsigned int authkeylen; 184 185 u8 salt[MAX_SALT_SIZE]; 186 unsigned int salt_len; 187 unsigned int salt_offset; 188 u8 iv[MAX_IV_SIZE]; 189 190 unsigned int digestsize; 191 192 struct iproc_alg_s *alg; 193 bool is_esp; 194 195 struct cipher_op cipher; 196 enum spu_cipher_type cipher_type; 197 198 struct auth_op auth; 199 bool auth_first; 200 201 /* 202 * The maximum length in bytes of the payload in a SPU message for this 203 * context. For SPU-M, the payload is the combination of AAD and data. 204 * For SPU2, the payload is just data. A value of SPU_MAX_PAYLOAD_INF 205 * indicates that there is no limit to the length of the SPU message 206 * payload. 207 */ 208 unsigned int max_payload; 209 210 struct crypto_aead *fallback_cipher; 211 212 /* auth_type is determined during processing of request */ 213 214 u8 ipad[MAX_HASH_BLOCK_SIZE]; 215 u8 opad[MAX_HASH_BLOCK_SIZE]; 216 217 /* 218 * Buffer to hold SPU message header template. Template is created at 219 * setkey time for skcipher requests, since most of the fields in the 220 * header are known at that time. At request time, just fill in a few 221 * missing pieces related to length of data in the request and IVs, etc. 222 */ 223 u8 bcm_spu_req_hdr[ALIGN(SPU2_HEADER_ALLOC_LEN, SPU_MSG_ALIGN)]; 224 225 /* Length of SPU request header */ 226 u16 spu_req_hdr_len; 227 228 /* Expected length of SPU response header */ 229 u16 spu_resp_hdr_len; 230 231 /* 232 * shash descriptor - needed to perform incremental hashing in 233 * in software, when hw doesn't support it. 234 */ 235 struct shash_desc *shash; 236 237 bool is_rfc4543; /* RFC 4543 style of GMAC */ 238 }; 239 240 /* state from iproc_reqctx_s necessary for hash state export/import */ 241 struct spu_hash_export_s { 242 unsigned int total_todo; 243 unsigned int total_sent; 244 u8 hash_carry[HASH_CARRY_MAX]; 245 unsigned int hash_carry_len; 246 u8 incr_hash[MAX_DIGEST_SIZE]; 247 bool is_sw_hmac; 248 }; 249 250 struct iproc_reqctx_s { 251 /* general context */ 252 struct crypto_async_request *parent; 253 254 /* only valid after enqueue() */ 255 struct iproc_ctx_s *ctx; 256 257 u8 chan_idx; /* Mailbox channel to be used to submit this request */ 258 259 /* total todo, rx'd, and sent for this request */ 260 unsigned int total_todo; 261 unsigned int total_received; /* only valid for skcipher */ 262 unsigned int total_sent; 263 264 /* 265 * num bytes sent to hw from the src sg in this request. This can differ 266 * from total_sent for incremental hashing. total_sent includes previous 267 * init() and update() data. src_sent does not. 268 */ 269 unsigned int src_sent; 270 271 /* 272 * For AEAD requests, start of associated data. This will typically 273 * point to the beginning of the src scatterlist from the request, 274 * since assoc data is at the beginning of the src scatterlist rather 275 * than in its own sg. 276 */ 277 struct scatterlist *assoc; 278 279 /* 280 * scatterlist entry and offset to start of data for next chunk. Crypto 281 * API src scatterlist for AEAD starts with AAD, if present. For first 282 * chunk, src_sg is sg entry at beginning of input data (after AAD). 283 * src_skip begins at the offset in that sg entry where data begins. 284 */ 285 struct scatterlist *src_sg; 286 int src_nents; /* Number of src entries with data */ 287 u32 src_skip; /* bytes of current sg entry already used */ 288 289 /* 290 * Same for destination. For AEAD, if there is AAD, output data must 291 * be written at offset following AAD. 292 */ 293 struct scatterlist *dst_sg; 294 int dst_nents; /* Number of dst entries with data */ 295 u32 dst_skip; /* bytes of current sg entry already written */ 296 297 /* Mailbox message used to send this request to PDC driver */ 298 struct brcm_message mb_mssg; 299 300 bool bd_suppress; /* suppress BD field in SPU response? */ 301 302 /* cipher context */ 303 bool is_encrypt; 304 305 /* 306 * CBC mode: IV. CTR mode: counter. Else empty. Used as a DMA 307 * buffer for AEAD requests. So allocate as DMAable memory. If IV 308 * concatenated with salt, includes the salt. 309 */ 310 u8 *iv_ctr; 311 /* Length of IV or counter, in bytes */ 312 unsigned int iv_ctr_len; 313 314 /* 315 * Hash requests can be of any size, whether initial, update, or final. 316 * A non-final request must be submitted to the SPU as an integral 317 * number of blocks. This may leave data at the end of the request 318 * that is not a full block. Since the request is non-final, it cannot 319 * be padded. So, we write the remainder to this hash_carry buffer and 320 * hold it until the next request arrives. The carry data is then 321 * submitted at the beginning of the data in the next SPU msg. 322 * hash_carry_len is the number of bytes currently in hash_carry. These 323 * fields are only used for ahash requests. 324 */ 325 u8 hash_carry[HASH_CARRY_MAX]; 326 unsigned int hash_carry_len; 327 unsigned int is_final; /* is this the final for the hash op? */ 328 329 /* 330 * Digest from incremental hash is saved here to include in next hash 331 * operation. Cannot be stored in req->result for truncated hashes, 332 * since result may be sized for final digest. Cannot be saved in 333 * msg_buf because that gets deleted between incremental hash ops 334 * and is not saved as part of export(). 335 */ 336 u8 incr_hash[MAX_DIGEST_SIZE]; 337 338 /* hmac context */ 339 bool is_sw_hmac; 340 341 /* aead context */ 342 struct crypto_tfm *old_tfm; 343 crypto_completion_t old_complete; 344 void *old_data; 345 346 gfp_t gfp; 347 348 /* Buffers used to build SPU request and response messages */ 349 struct spu_msg_buf msg_buf; 350 }; 351 352 /* 353 * Structure encapsulates a set of function pointers specific to the type of 354 * SPU hardware running. These functions handling creation and parsing of 355 * SPU request messages and SPU response messages. Includes hardware-specific 356 * values read from device tree. 357 */ 358 struct spu_hw { 359 void (*spu_dump_msg_hdr)(u8 *buf, unsigned int buf_len); 360 u32 (*spu_ctx_max_payload)(enum spu_cipher_alg cipher_alg, 361 enum spu_cipher_mode cipher_mode, 362 unsigned int blocksize); 363 u32 (*spu_payload_length)(u8 *spu_hdr); 364 u16 (*spu_response_hdr_len)(u16 auth_key_len, u16 enc_key_len, 365 bool is_hash); 366 u16 (*spu_hash_pad_len)(enum hash_alg hash_alg, 367 enum hash_mode hash_mode, u32 chunksize, 368 u16 hash_block_size); 369 u32 (*spu_gcm_ccm_pad_len)(enum spu_cipher_mode cipher_mode, 370 unsigned int data_size); 371 u32 (*spu_assoc_resp_len)(enum spu_cipher_mode cipher_mode, 372 unsigned int assoc_len, 373 unsigned int iv_len, bool is_encrypt); 374 u8 (*spu_aead_ivlen)(enum spu_cipher_mode cipher_mode, 375 u16 iv_len); 376 enum hash_type (*spu_hash_type)(u32 src_sent); 377 u32 (*spu_digest_size)(u32 digest_size, enum hash_alg alg, 378 enum hash_type); 379 u32 (*spu_create_request)(u8 *spu_hdr, 380 struct spu_request_opts *req_opts, 381 struct spu_cipher_parms *cipher_parms, 382 struct spu_hash_parms *hash_parms, 383 struct spu_aead_parms *aead_parms, 384 unsigned int data_size); 385 u16 (*spu_cipher_req_init)(u8 *spu_hdr, 386 struct spu_cipher_parms *cipher_parms); 387 void (*spu_cipher_req_finish)(u8 *spu_hdr, 388 u16 spu_req_hdr_len, 389 unsigned int is_inbound, 390 struct spu_cipher_parms *cipher_parms, 391 unsigned int data_size); 392 void (*spu_request_pad)(u8 *pad_start, u32 gcm_padding, 393 u32 hash_pad_len, enum hash_alg auth_alg, 394 enum hash_mode auth_mode, 395 unsigned int total_sent, u32 status_padding); 396 u8 (*spu_xts_tweak_in_payload)(void); 397 u8 (*spu_tx_status_len)(void); 398 u8 (*spu_rx_status_len)(void); 399 int (*spu_status_process)(u8 *statp); 400 void (*spu_ccm_update_iv)(unsigned int digestsize, 401 struct spu_cipher_parms *cipher_parms, 402 unsigned int assoclen, unsigned int chunksize, 403 bool is_encrypt, bool is_esp); 404 u32 (*spu_wordalign_padlen)(u32 data_size); 405 406 /* The base virtual address of the SPU hw registers */ 407 void __iomem *reg_vbase[MAX_SPUS]; 408 409 /* Version of the SPU hardware */ 410 enum spu_spu_type spu_type; 411 412 /* Sub-version of the SPU hardware */ 413 enum spu_spu_subtype spu_subtype; 414 415 /* The number of SPUs on this platform */ 416 u32 num_spu; 417 418 /* The number of SPU channels on this platform */ 419 u32 num_chan; 420 }; 421 422 struct bcm_device_private { 423 struct platform_device *pdev; 424 425 struct spu_hw spu; 426 427 atomic_t session_count; /* number of streams active */ 428 atomic_t stream_count; /* monotonic counter for streamID's */ 429 430 /* Length of BCM header. Set to 0 when hw does not expect BCM HEADER. */ 431 u8 bcm_hdr_len; 432 433 /* The index of the channel to use for the next crypto request */ 434 atomic_t next_chan; 435 436 struct dentry *debugfs_dir; 437 struct dentry *debugfs_stats; 438 439 /* Number of request bytes processed and result bytes returned */ 440 atomic64_t bytes_in; 441 atomic64_t bytes_out; 442 443 /* Number of operations of each type */ 444 atomic_t op_counts[SPU_OP_NUM]; 445 446 atomic_t cipher_cnt[CIPHER_ALG_LAST][CIPHER_MODE_LAST]; 447 atomic_t hash_cnt[HASH_ALG_LAST]; 448 atomic_t hmac_cnt[HASH_ALG_LAST]; 449 atomic_t aead_cnt[AEAD_TYPE_LAST]; 450 451 /* Number of calls to setkey() for each operation type */ 452 atomic_t setkey_cnt[SPU_OP_NUM]; 453 454 /* Number of times request was resubmitted because mb was full */ 455 atomic_t mb_no_spc; 456 457 /* Number of mailbox send failures */ 458 atomic_t mb_send_fail; 459 460 /* Number of ICV check failures for AEAD messages */ 461 atomic_t bad_icv; 462 463 struct mbox_client mcl; 464 465 /* Array of mailbox channel pointers, one for each channel */ 466 struct mbox_chan **mbox; 467 }; 468 469 extern struct bcm_device_private iproc_priv; 470 471 #endif 472