• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Driver for Digigram VX soundcards
4  *
5  * Hardware core part
6  *
7  * Copyright (c) 2002 by Takashi Iwai <tiwai@suse.de>
8  */
9 
10 #include <linux/delay.h>
11 #include <linux/slab.h>
12 #include <linux/interrupt.h>
13 #include <linux/init.h>
14 #include <linux/device.h>
15 #include <linux/firmware.h>
16 #include <linux/module.h>
17 #include <linux/io.h>
18 #include <sound/core.h>
19 #include <sound/pcm.h>
20 #include <sound/asoundef.h>
21 #include <sound/info.h>
22 #include <sound/vx_core.h>
23 #include "vx_cmd.h"
24 
25 MODULE_AUTHOR("Takashi Iwai <tiwai@suse.de>");
26 MODULE_DESCRIPTION("Common routines for Digigram VX drivers");
27 MODULE_LICENSE("GPL");
28 
29 
30 /*
31  * vx_check_reg_bit - wait for the specified bit is set/reset on a register
32  * @reg: register to check
33  * @mask: bit mask
34  * @bit: resultant bit to be checked
35  * @time: time-out of loop in msec
36  *
37  * returns zero if a bit matches, or a negative error code.
38  */
snd_vx_check_reg_bit(struct vx_core * chip,int reg,int mask,int bit,int time)39 int snd_vx_check_reg_bit(struct vx_core *chip, int reg, int mask, int bit, int time)
40 {
41 	unsigned long end_time = jiffies + (time * HZ + 999) / 1000;
42 	static const char * const reg_names[VX_REG_MAX] = {
43 		"ICR", "CVR", "ISR", "IVR", "RXH", "RXM", "RXL",
44 		"DMA", "CDSP", "RFREQ", "RUER/V2", "DATA", "MEMIRQ",
45 		"ACQ", "BIT0", "BIT1", "MIC0", "MIC1", "MIC2",
46 		"MIC3", "INTCSR", "CNTRL", "GPIOC",
47 		"LOFREQ", "HIFREQ", "CSUER", "RUER"
48 	};
49 
50 	do {
51 		if ((snd_vx_inb(chip, reg) & mask) == bit)
52 			return 0;
53 		//msleep(10);
54 	} while (time_after_eq(end_time, jiffies));
55 	snd_printd(KERN_DEBUG "vx_check_reg_bit: timeout, reg=%s, mask=0x%x, val=0x%x\n", reg_names[reg], mask, snd_vx_inb(chip, reg));
56 	return -EIO;
57 }
58 
59 EXPORT_SYMBOL(snd_vx_check_reg_bit);
60 
61 /*
62  * vx_send_irq_dsp - set command irq bit
63  * @num: the requested IRQ type, IRQ_XXX
64  *
65  * this triggers the specified IRQ request
66  * returns 0 if successful, or a negative error code.
67  *
68  */
vx_send_irq_dsp(struct vx_core * chip,int num)69 static int vx_send_irq_dsp(struct vx_core *chip, int num)
70 {
71 	int nirq;
72 
73 	/* wait for Hc = 0 */
74 	if (snd_vx_check_reg_bit(chip, VX_CVR, CVR_HC, 0, 200) < 0)
75 		return -EIO;
76 
77 	nirq = num;
78 	if (vx_has_new_dsp(chip))
79 		nirq += VXP_IRQ_OFFSET;
80 	vx_outb(chip, CVR, (nirq >> 1) | CVR_HC);
81 	return 0;
82 }
83 
84 
85 /*
86  * vx_reset_chk - reset CHK bit on ISR
87  *
88  * returns 0 if successful, or a negative error code.
89  */
vx_reset_chk(struct vx_core * chip)90 static int vx_reset_chk(struct vx_core *chip)
91 {
92 	/* Reset irq CHK */
93 	if (vx_send_irq_dsp(chip, IRQ_RESET_CHK) < 0)
94 		return -EIO;
95 	/* Wait until CHK = 0 */
96 	if (vx_check_isr(chip, ISR_CHK, 0, 200) < 0)
97 		return -EIO;
98 	return 0;
99 }
100 
101 /*
102  * vx_transfer_end - terminate message transfer
103  * @cmd: IRQ message to send (IRQ_MESS_XXX_END)
104  *
105  * returns 0 if successful, or a negative error code.
106  * the error code can be VX-specific, retrieved via vx_get_error().
107  * NB: call with mutex held!
108  */
vx_transfer_end(struct vx_core * chip,int cmd)109 static int vx_transfer_end(struct vx_core *chip, int cmd)
110 {
111 	int err;
112 
113 	if ((err = vx_reset_chk(chip)) < 0)
114 		return err;
115 
116 	/* irq MESS_READ/WRITE_END */
117 	if ((err = vx_send_irq_dsp(chip, cmd)) < 0)
118 		return err;
119 
120 	/* Wait CHK = 1 */
121 	if ((err = vx_wait_isr_bit(chip, ISR_CHK)) < 0)
122 		return err;
123 
124 	/* If error, Read RX */
125 	if ((err = vx_inb(chip, ISR)) & ISR_ERR) {
126 		if ((err = vx_wait_for_rx_full(chip)) < 0) {
127 			snd_printd(KERN_DEBUG "transfer_end: error in rx_full\n");
128 			return err;
129 		}
130 		err = vx_inb(chip, RXH) << 16;
131 		err |= vx_inb(chip, RXM) << 8;
132 		err |= vx_inb(chip, RXL);
133 		snd_printd(KERN_DEBUG "transfer_end: error = 0x%x\n", err);
134 		return -(VX_ERR_MASK | err);
135 	}
136 	return 0;
137 }
138 
139 /*
140  * vx_read_status - return the status rmh
141  * @rmh: rmh record to store the status
142  *
143  * returns 0 if successful, or a negative error code.
144  * the error code can be VX-specific, retrieved via vx_get_error().
145  * NB: call with mutex held!
146  */
vx_read_status(struct vx_core * chip,struct vx_rmh * rmh)147 static int vx_read_status(struct vx_core *chip, struct vx_rmh *rmh)
148 {
149 	int i, err, val, size;
150 
151 	/* no read necessary? */
152 	if (rmh->DspStat == RMH_SSIZE_FIXED && rmh->LgStat == 0)
153 		return 0;
154 
155 	/* Wait for RX full (with timeout protection)
156 	 * The first word of status is in RX
157 	 */
158 	err = vx_wait_for_rx_full(chip);
159 	if (err < 0)
160 		return err;
161 
162 	/* Read RX */
163 	val = vx_inb(chip, RXH) << 16;
164 	val |= vx_inb(chip, RXM) << 8;
165 	val |= vx_inb(chip, RXL);
166 
167 	/* If status given by DSP, let's decode its size */
168 	switch (rmh->DspStat) {
169 	case RMH_SSIZE_ARG:
170 		size = val & 0xff;
171 		rmh->Stat[0] = val & 0xffff00;
172 		rmh->LgStat = size + 1;
173 		break;
174 	case RMH_SSIZE_MASK:
175 		/* Let's count the arg numbers from a mask */
176 		rmh->Stat[0] = val;
177 		size = 0;
178 		while (val) {
179 			if (val & 0x01)
180 				size++;
181 			val >>= 1;
182 		}
183 		rmh->LgStat = size + 1;
184 		break;
185 	default:
186 		/* else retrieve the status length given by the driver */
187 		size = rmh->LgStat;
188 		rmh->Stat[0] = val;  /* Val is the status 1st word */
189 		size--;              /* hence adjust remaining length */
190 		break;
191         }
192 
193 	if (size < 1)
194 		return 0;
195 	if (snd_BUG_ON(size >= SIZE_MAX_STATUS))
196 		return -EINVAL;
197 
198 	for (i = 1; i <= size; i++) {
199 		/* trigger an irq MESS_WRITE_NEXT */
200 		err = vx_send_irq_dsp(chip, IRQ_MESS_WRITE_NEXT);
201 		if (err < 0)
202 			return err;
203 		/* Wait for RX full (with timeout protection) */
204 		err = vx_wait_for_rx_full(chip);
205 		if (err < 0)
206 			return err;
207 		rmh->Stat[i] = vx_inb(chip, RXH) << 16;
208 		rmh->Stat[i] |= vx_inb(chip, RXM) <<  8;
209 		rmh->Stat[i] |= vx_inb(chip, RXL);
210 	}
211 
212 	return vx_transfer_end(chip, IRQ_MESS_WRITE_END);
213 }
214 
215 
216 #define MASK_MORE_THAN_1_WORD_COMMAND   0x00008000
217 #define MASK_1_WORD_COMMAND             0x00ff7fff
218 
219 /*
220  * vx_send_msg_nolock - send a DSP message and read back the status
221  * @rmh: the rmh record to send and receive
222  *
223  * returns 0 if successful, or a negative error code.
224  * the error code can be VX-specific, retrieved via vx_get_error().
225  *
226  * this function doesn't call mutex lock at all.
227  */
vx_send_msg_nolock(struct vx_core * chip,struct vx_rmh * rmh)228 int vx_send_msg_nolock(struct vx_core *chip, struct vx_rmh *rmh)
229 {
230 	int i, err;
231 
232 	if (chip->chip_status & VX_STAT_IS_STALE)
233 		return -EBUSY;
234 
235 	if ((err = vx_reset_chk(chip)) < 0) {
236 		snd_printd(KERN_DEBUG "vx_send_msg: vx_reset_chk error\n");
237 		return err;
238 	}
239 
240 #if 0
241 	printk(KERN_DEBUG "rmh: cmd = 0x%06x, length = %d, stype = %d\n",
242 	       rmh->Cmd[0], rmh->LgCmd, rmh->DspStat);
243 	if (rmh->LgCmd > 1) {
244 		printk(KERN_DEBUG "  ");
245 		for (i = 1; i < rmh->LgCmd; i++)
246 			printk(KERN_CONT "0x%06x ", rmh->Cmd[i]);
247 		printk(KERN_CONT "\n");
248 	}
249 #endif
250 	/* Check bit M is set according to length of the command */
251 	if (rmh->LgCmd > 1)
252 		rmh->Cmd[0] |= MASK_MORE_THAN_1_WORD_COMMAND;
253 	else
254 		rmh->Cmd[0] &= MASK_1_WORD_COMMAND;
255 
256 	/* Wait for TX empty */
257 	if ((err = vx_wait_isr_bit(chip, ISR_TX_EMPTY)) < 0) {
258 		snd_printd(KERN_DEBUG "vx_send_msg: wait tx empty error\n");
259 		return err;
260 	}
261 
262 	/* Write Cmd[0] */
263 	vx_outb(chip, TXH, (rmh->Cmd[0] >> 16) & 0xff);
264 	vx_outb(chip, TXM, (rmh->Cmd[0] >> 8) & 0xff);
265 	vx_outb(chip, TXL, rmh->Cmd[0] & 0xff);
266 
267 	/* Trigger irq MESSAGE */
268 	if ((err = vx_send_irq_dsp(chip, IRQ_MESSAGE)) < 0) {
269 		snd_printd(KERN_DEBUG "vx_send_msg: send IRQ_MESSAGE error\n");
270 		return err;
271 	}
272 
273 	/* Wait for CHK = 1 */
274 	if ((err = vx_wait_isr_bit(chip, ISR_CHK)) < 0)
275 		return err;
276 
277 	/* If error, get error value from RX */
278 	if (vx_inb(chip, ISR) & ISR_ERR) {
279 		if ((err = vx_wait_for_rx_full(chip)) < 0) {
280 			snd_printd(KERN_DEBUG "vx_send_msg: rx_full read error\n");
281 			return err;
282 		}
283 		err = vx_inb(chip, RXH) << 16;
284 		err |= vx_inb(chip, RXM) << 8;
285 		err |= vx_inb(chip, RXL);
286 		snd_printd(KERN_DEBUG "msg got error = 0x%x at cmd[0]\n", err);
287 		err = -(VX_ERR_MASK | err);
288 		return err;
289 	}
290 
291 	/* Send the other words */
292 	if (rmh->LgCmd > 1) {
293 		for (i = 1; i < rmh->LgCmd; i++) {
294 			/* Wait for TX ready */
295 			if ((err = vx_wait_isr_bit(chip, ISR_TX_READY)) < 0) {
296 				snd_printd(KERN_DEBUG "vx_send_msg: tx_ready error\n");
297 				return err;
298 			}
299 
300 			/* Write Cmd[i] */
301 			vx_outb(chip, TXH, (rmh->Cmd[i] >> 16) & 0xff);
302 			vx_outb(chip, TXM, (rmh->Cmd[i] >> 8) & 0xff);
303 			vx_outb(chip, TXL, rmh->Cmd[i] & 0xff);
304 
305 			/* Trigger irq MESS_READ_NEXT */
306 			if ((err = vx_send_irq_dsp(chip, IRQ_MESS_READ_NEXT)) < 0) {
307 				snd_printd(KERN_DEBUG "vx_send_msg: IRQ_READ_NEXT error\n");
308 				return err;
309 			}
310 		}
311 		/* Wait for TX empty */
312 		if ((err = vx_wait_isr_bit(chip, ISR_TX_READY)) < 0) {
313 			snd_printd(KERN_DEBUG "vx_send_msg: TX_READY error\n");
314 			return err;
315 		}
316 		/* End of transfer */
317 		err = vx_transfer_end(chip, IRQ_MESS_READ_END);
318 		if (err < 0)
319 			return err;
320 	}
321 
322 	return vx_read_status(chip, rmh);
323 }
324 
325 
326 /*
327  * vx_send_msg - send a DSP message with mutex
328  * @rmh: the rmh record to send and receive
329  *
330  * returns 0 if successful, or a negative error code.
331  * see vx_send_msg_nolock().
332  */
vx_send_msg(struct vx_core * chip,struct vx_rmh * rmh)333 int vx_send_msg(struct vx_core *chip, struct vx_rmh *rmh)
334 {
335 	int err;
336 
337 	mutex_lock(&chip->lock);
338 	err = vx_send_msg_nolock(chip, rmh);
339 	mutex_unlock(&chip->lock);
340 	return err;
341 }
342 
343 
344 /*
345  * vx_send_rih_nolock - send an RIH to xilinx
346  * @cmd: the command to send
347  *
348  * returns 0 if successful, or a negative error code.
349  * the error code can be VX-specific, retrieved via vx_get_error().
350  *
351  * this function doesn't call mutex at all.
352  *
353  * unlike RMH, no command is sent to DSP.
354  */
vx_send_rih_nolock(struct vx_core * chip,int cmd)355 int vx_send_rih_nolock(struct vx_core *chip, int cmd)
356 {
357 	int err;
358 
359 	if (chip->chip_status & VX_STAT_IS_STALE)
360 		return -EBUSY;
361 
362 #if 0
363 	printk(KERN_DEBUG "send_rih: cmd = 0x%x\n", cmd);
364 #endif
365 	if ((err = vx_reset_chk(chip)) < 0)
366 		return err;
367 	/* send the IRQ */
368 	if ((err = vx_send_irq_dsp(chip, cmd)) < 0)
369 		return err;
370 	/* Wait CHK = 1 */
371 	if ((err = vx_wait_isr_bit(chip, ISR_CHK)) < 0)
372 		return err;
373 	/* If error, read RX */
374 	if (vx_inb(chip, ISR) & ISR_ERR) {
375 		if ((err = vx_wait_for_rx_full(chip)) < 0)
376 			return err;
377 		err = vx_inb(chip, RXH) << 16;
378 		err |= vx_inb(chip, RXM) << 8;
379 		err |= vx_inb(chip, RXL);
380 		return -(VX_ERR_MASK | err);
381 	}
382 	return 0;
383 }
384 
385 
386 /*
387  * vx_send_rih - send an RIH with mutex
388  * @cmd: the command to send
389  *
390  * see vx_send_rih_nolock().
391  */
vx_send_rih(struct vx_core * chip,int cmd)392 int vx_send_rih(struct vx_core *chip, int cmd)
393 {
394 	int err;
395 
396 	mutex_lock(&chip->lock);
397 	err = vx_send_rih_nolock(chip, cmd);
398 	mutex_unlock(&chip->lock);
399 	return err;
400 }
401 
402 #define END_OF_RESET_WAIT_TIME		500	/* us */
403 
404 /**
405  * snd_vx_boot_xilinx - boot up the xilinx interface
406  * @chip: VX core instance
407  * @boot: the boot record to load
408  */
snd_vx_load_boot_image(struct vx_core * chip,const struct firmware * boot)409 int snd_vx_load_boot_image(struct vx_core *chip, const struct firmware *boot)
410 {
411 	unsigned int i;
412 	int no_fillup = vx_has_new_dsp(chip);
413 
414 	/* check the length of boot image */
415 	if (boot->size <= 0)
416 		return -EINVAL;
417 	if (boot->size % 3)
418 		return -EINVAL;
419 #if 0
420 	{
421 		/* more strict check */
422 		unsigned int c = ((u32)boot->data[0] << 16) | ((u32)boot->data[1] << 8) | boot->data[2];
423 		if (boot->size != (c + 2) * 3)
424 			return -EINVAL;
425 	}
426 #endif
427 
428 	/* reset dsp */
429 	vx_reset_dsp(chip);
430 
431 	udelay(END_OF_RESET_WAIT_TIME); /* another wait? */
432 
433 	/* download boot strap */
434 	for (i = 0; i < 0x600; i += 3) {
435 		if (i >= boot->size) {
436 			if (no_fillup)
437 				break;
438 			if (vx_wait_isr_bit(chip, ISR_TX_EMPTY) < 0) {
439 				snd_printk(KERN_ERR "dsp boot failed at %d\n", i);
440 				return -EIO;
441 			}
442 			vx_outb(chip, TXH, 0);
443 			vx_outb(chip, TXM, 0);
444 			vx_outb(chip, TXL, 0);
445 		} else {
446 			const unsigned char *image = boot->data + i;
447 			if (vx_wait_isr_bit(chip, ISR_TX_EMPTY) < 0) {
448 				snd_printk(KERN_ERR "dsp boot failed at %d\n", i);
449 				return -EIO;
450 			}
451 			vx_outb(chip, TXH, image[0]);
452 			vx_outb(chip, TXM, image[1]);
453 			vx_outb(chip, TXL, image[2]);
454 		}
455 	}
456 	return 0;
457 }
458 
459 EXPORT_SYMBOL(snd_vx_load_boot_image);
460 
461 /*
462  * vx_test_irq_src - query the source of interrupts
463  *
464  * called from irq handler only
465  */
vx_test_irq_src(struct vx_core * chip,unsigned int * ret)466 static int vx_test_irq_src(struct vx_core *chip, unsigned int *ret)
467 {
468 	int err;
469 
470 	vx_init_rmh(&chip->irq_rmh, CMD_TEST_IT);
471 	mutex_lock(&chip->lock);
472 	err = vx_send_msg_nolock(chip, &chip->irq_rmh);
473 	if (err < 0)
474 		*ret = 0;
475 	else
476 		*ret = chip->irq_rmh.Stat[0];
477 	mutex_unlock(&chip->lock);
478 	return err;
479 }
480 
481 
482 /*
483  * snd_vx_threaded_irq_handler - threaded irq handler
484  */
snd_vx_threaded_irq_handler(int irq,void * dev)485 irqreturn_t snd_vx_threaded_irq_handler(int irq, void *dev)
486 {
487 	struct vx_core *chip = dev;
488 	unsigned int events;
489 
490 	if (chip->chip_status & VX_STAT_IS_STALE)
491 		return IRQ_HANDLED;
492 
493 	if (vx_test_irq_src(chip, &events) < 0)
494 		return IRQ_HANDLED;
495 
496 #if 0
497 	if (events & 0x000800)
498 		printk(KERN_ERR "DSP Stream underrun ! IRQ events = 0x%x\n", events);
499 #endif
500 	// printk(KERN_DEBUG "IRQ events = 0x%x\n", events);
501 
502 	/* We must prevent any application using this DSP
503 	 * and block any further request until the application
504 	 * either unregisters or reloads the DSP
505 	 */
506 	if (events & FATAL_DSP_ERROR) {
507 		snd_printk(KERN_ERR "vx_core: fatal DSP error!!\n");
508 		return IRQ_HANDLED;
509 	}
510 
511 	/* The start on time code conditions are filled (ie the time code
512 	 * received by the board is equal to one of those given to it).
513 	 */
514 	if (events & TIME_CODE_EVENT_PENDING) {
515 		; /* so far, nothing to do yet */
516 	}
517 
518 	/* The frequency has changed on the board (UER mode). */
519 	if (events & FREQUENCY_CHANGE_EVENT_PENDING)
520 		vx_change_frequency(chip);
521 
522 	/* update the pcm streams */
523 	vx_pcm_update_intr(chip, events);
524 	return IRQ_HANDLED;
525 }
526 EXPORT_SYMBOL(snd_vx_threaded_irq_handler);
527 
528 /**
529  * snd_vx_irq_handler - interrupt handler
530  * @irq: irq number
531  * @dev: VX core instance
532  */
snd_vx_irq_handler(int irq,void * dev)533 irqreturn_t snd_vx_irq_handler(int irq, void *dev)
534 {
535 	struct vx_core *chip = dev;
536 
537 	if (! (chip->chip_status & VX_STAT_CHIP_INIT) ||
538 	    (chip->chip_status & VX_STAT_IS_STALE))
539 		return IRQ_NONE;
540 	if (! vx_test_and_ack(chip))
541 		return IRQ_WAKE_THREAD;
542 	return IRQ_NONE;
543 }
544 
545 EXPORT_SYMBOL(snd_vx_irq_handler);
546 
547 /*
548  */
vx_reset_board(struct vx_core * chip,int cold_reset)549 static void vx_reset_board(struct vx_core *chip, int cold_reset)
550 {
551 	if (snd_BUG_ON(!chip->ops->reset_board))
552 		return;
553 
554 	/* current source, later sync'ed with target */
555 	chip->audio_source = VX_AUDIO_SRC_LINE;
556 	if (cold_reset) {
557 		chip->audio_source_target = chip->audio_source;
558 		chip->clock_source = INTERNAL_QUARTZ;
559 		chip->clock_mode = VX_CLOCK_MODE_AUTO;
560 		chip->freq = 48000;
561 		chip->uer_detected = VX_UER_MODE_NOT_PRESENT;
562 		chip->uer_bits = SNDRV_PCM_DEFAULT_CON_SPDIF;
563 	}
564 
565 	chip->ops->reset_board(chip, cold_reset);
566 
567 	vx_reset_codec(chip, cold_reset);
568 
569 	vx_set_internal_clock(chip, chip->freq);
570 
571 	/* Reset the DSP */
572 	vx_reset_dsp(chip);
573 
574 	if (vx_is_pcmcia(chip)) {
575 		/* Acknowledge any pending IRQ and reset the MEMIRQ flag. */
576 		vx_test_and_ack(chip);
577 		vx_validate_irq(chip, 1);
578 	}
579 
580 	/* init CBits */
581 	vx_set_iec958_status(chip, chip->uer_bits);
582 }
583 
584 
585 /*
586  * proc interface
587  */
588 
vx_proc_read(struct snd_info_entry * entry,struct snd_info_buffer * buffer)589 static void vx_proc_read(struct snd_info_entry *entry, struct snd_info_buffer *buffer)
590 {
591 	struct vx_core *chip = entry->private_data;
592 	static const char * const audio_src_vxp[] = { "Line", "Mic", "Digital" };
593 	static const char * const audio_src_vx2[] = { "Analog", "Analog", "Digital" };
594 	static const char * const clock_mode[] = { "Auto", "Internal", "External" };
595 	static const char * const clock_src[] = { "Internal", "External" };
596 	static const char * const uer_type[] = { "Consumer", "Professional", "Not Present" };
597 
598 	snd_iprintf(buffer, "%s\n", chip->card->longname);
599 	snd_iprintf(buffer, "Xilinx Firmware: %s\n",
600 		    (chip->chip_status & VX_STAT_XILINX_LOADED) ? "Loaded" : "No");
601 	snd_iprintf(buffer, "Device Initialized: %s\n",
602 		    (chip->chip_status & VX_STAT_DEVICE_INIT) ? "Yes" : "No");
603 	snd_iprintf(buffer, "DSP audio info:");
604 	if (chip->audio_info & VX_AUDIO_INFO_REAL_TIME)
605 		snd_iprintf(buffer, " realtime");
606 	if (chip->audio_info & VX_AUDIO_INFO_OFFLINE)
607 		snd_iprintf(buffer, " offline");
608 	if (chip->audio_info & VX_AUDIO_INFO_MPEG1)
609 		snd_iprintf(buffer, " mpeg1");
610 	if (chip->audio_info & VX_AUDIO_INFO_MPEG2)
611 		snd_iprintf(buffer, " mpeg2");
612 	if (chip->audio_info & VX_AUDIO_INFO_LINEAR_8)
613 		snd_iprintf(buffer, " linear8");
614 	if (chip->audio_info & VX_AUDIO_INFO_LINEAR_16)
615 		snd_iprintf(buffer, " linear16");
616 	if (chip->audio_info & VX_AUDIO_INFO_LINEAR_24)
617 		snd_iprintf(buffer, " linear24");
618 	snd_iprintf(buffer, "\n");
619 	snd_iprintf(buffer, "Input Source: %s\n", vx_is_pcmcia(chip) ?
620 		    audio_src_vxp[chip->audio_source] :
621 		    audio_src_vx2[chip->audio_source]);
622 	snd_iprintf(buffer, "Clock Mode: %s\n", clock_mode[chip->clock_mode]);
623 	snd_iprintf(buffer, "Clock Source: %s\n", clock_src[chip->clock_source]);
624 	snd_iprintf(buffer, "Frequency: %d\n", chip->freq);
625 	snd_iprintf(buffer, "Detected Frequency: %d\n", chip->freq_detected);
626 	snd_iprintf(buffer, "Detected UER type: %s\n", uer_type[chip->uer_detected]);
627 	snd_iprintf(buffer, "Min/Max/Cur IBL: %d/%d/%d (granularity=%d)\n",
628 		    chip->ibl.min_size, chip->ibl.max_size, chip->ibl.size,
629 		    chip->ibl.granularity);
630 }
631 
vx_proc_init(struct vx_core * chip)632 static void vx_proc_init(struct vx_core *chip)
633 {
634 	snd_card_ro_proc_new(chip->card, "vx-status", chip, vx_proc_read);
635 }
636 
637 
638 /**
639  * snd_vx_dsp_boot - load the DSP boot
640  * @chip: VX core instance
641  * @boot: firmware data
642  */
snd_vx_dsp_boot(struct vx_core * chip,const struct firmware * boot)643 int snd_vx_dsp_boot(struct vx_core *chip, const struct firmware *boot)
644 {
645 	int err;
646 	int cold_reset = !(chip->chip_status & VX_STAT_DEVICE_INIT);
647 
648 	vx_reset_board(chip, cold_reset);
649 	vx_validate_irq(chip, 0);
650 
651 	if ((err = snd_vx_load_boot_image(chip, boot)) < 0)
652 		return err;
653 	msleep(10);
654 
655 	return 0;
656 }
657 
658 EXPORT_SYMBOL(snd_vx_dsp_boot);
659 
660 /**
661  * snd_vx_dsp_load - load the DSP image
662  * @chip: VX core instance
663  * @dsp: firmware data
664  */
snd_vx_dsp_load(struct vx_core * chip,const struct firmware * dsp)665 int snd_vx_dsp_load(struct vx_core *chip, const struct firmware *dsp)
666 {
667 	unsigned int i;
668 	int err;
669 	unsigned int csum = 0;
670 	const unsigned char *image, *cptr;
671 
672 	if (dsp->size % 3)
673 		return -EINVAL;
674 
675 	vx_toggle_dac_mute(chip, 1);
676 
677 	/* Transfert data buffer from PC to DSP */
678 	for (i = 0; i < dsp->size; i += 3) {
679 		image = dsp->data + i;
680 		/* Wait DSP ready for a new read */
681 		if ((err = vx_wait_isr_bit(chip, ISR_TX_EMPTY)) < 0) {
682 			printk(KERN_ERR
683 			       "dsp loading error at position %d\n", i);
684 			return err;
685 		}
686 		cptr = image;
687 		csum ^= *cptr;
688 		csum = (csum >> 24) | (csum << 8);
689 		vx_outb(chip, TXH, *cptr++);
690 		csum ^= *cptr;
691 		csum = (csum >> 24) | (csum << 8);
692 		vx_outb(chip, TXM, *cptr++);
693 		csum ^= *cptr;
694 		csum = (csum >> 24) | (csum << 8);
695 		vx_outb(chip, TXL, *cptr++);
696 	}
697 	snd_printdd(KERN_DEBUG "checksum = 0x%08x\n", csum);
698 
699 	msleep(200);
700 
701 	if ((err = vx_wait_isr_bit(chip, ISR_CHK)) < 0)
702 		return err;
703 
704 	vx_toggle_dac_mute(chip, 0);
705 
706 	vx_test_and_ack(chip);
707 	vx_validate_irq(chip, 1);
708 
709 	return 0;
710 }
711 
712 EXPORT_SYMBOL(snd_vx_dsp_load);
713 
714 #ifdef CONFIG_PM
715 /*
716  * suspend
717  */
snd_vx_suspend(struct vx_core * chip)718 int snd_vx_suspend(struct vx_core *chip)
719 {
720 	snd_power_change_state(chip->card, SNDRV_CTL_POWER_D3hot);
721 	chip->chip_status |= VX_STAT_IN_SUSPEND;
722 
723 	return 0;
724 }
725 
726 EXPORT_SYMBOL(snd_vx_suspend);
727 
728 /*
729  * resume
730  */
snd_vx_resume(struct vx_core * chip)731 int snd_vx_resume(struct vx_core *chip)
732 {
733 	int i, err;
734 
735 	chip->chip_status &= ~VX_STAT_CHIP_INIT;
736 
737 	for (i = 0; i < 4; i++) {
738 		if (! chip->firmware[i])
739 			continue;
740 		err = chip->ops->load_dsp(chip, i, chip->firmware[i]);
741 		if (err < 0) {
742 			snd_printk(KERN_ERR "vx: firmware resume error at DSP %d\n", i);
743 			return -EIO;
744 		}
745 	}
746 
747 	chip->chip_status |= VX_STAT_CHIP_INIT;
748 	chip->chip_status &= ~VX_STAT_IN_SUSPEND;
749 
750 	snd_power_change_state(chip->card, SNDRV_CTL_POWER_D0);
751 	return 0;
752 }
753 
754 EXPORT_SYMBOL(snd_vx_resume);
755 #endif
756 
757 /**
758  * snd_vx_create - constructor for struct vx_core
759  * @card: card instance
760  * @hw: hardware specific record
761  * @ops: VX ops pointer
762  * @extra_size: extra byte size to allocate appending to chip
763  *
764  * this function allocates the instance and prepare for the hardware
765  * initialization.
766  *
767  * return the instance pointer if successful, NULL in error.
768  */
snd_vx_create(struct snd_card * card,const struct snd_vx_hardware * hw,const struct snd_vx_ops * ops,int extra_size)769 struct vx_core *snd_vx_create(struct snd_card *card,
770 			      const struct snd_vx_hardware *hw,
771 			      const struct snd_vx_ops *ops,
772 			      int extra_size)
773 {
774 	struct vx_core *chip;
775 
776 	if (snd_BUG_ON(!card || !hw || !ops))
777 		return NULL;
778 
779 	chip = kzalloc(sizeof(*chip) + extra_size, GFP_KERNEL);
780 	if (! chip)
781 		return NULL;
782 	mutex_init(&chip->lock);
783 	chip->irq = -1;
784 	chip->hw = hw;
785 	chip->type = hw->type;
786 	chip->ops = ops;
787 	mutex_init(&chip->mixer_mutex);
788 
789 	chip->card = card;
790 	card->private_data = chip;
791 	strcpy(card->driver, hw->name);
792 	sprintf(card->shortname, "Digigram %s", hw->name);
793 
794 	vx_proc_init(chip);
795 
796 	return chip;
797 }
798 
799 EXPORT_SYMBOL(snd_vx_create);
800