/kernel/linux/linux-5.10/arch/arm/boot/dts/ |
D | lpc4357-myd-lpc4357.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 3 * MYIR Tech MYD-LPC4357 Development Board with 800x480 7" TFT panel 5 * Copyright (C) 2016-2018 Vladimir Zapolskiy <vz@mleia.com> 8 /dts-v1/; 13 #include <dt-bindings/gpio/gpio.h> 17 compatible = "myir,myd-lpc4357", "nxp,lpc4357"; 20 stdout-path = "serial3:115200n8"; 29 compatible = "gpio-leds"; 30 pinctrl-names = "default"; 31 pinctrl-0 = <&led_pins>; [all …]
|
D | stm32mp15-pinctrl.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 3 * Copyright (C) STMicroelectronics 2017 - All Rights Reserved 6 #include <dt-bindings/pinctrl/stm32-pinfunc.h> 9 adc1_in6_pins_a: adc1-in6-0 { 15 adc12_ain_pins_a: adc12-ain-0 { 24 adc12_ain_pins_b: adc12-ain-1 { 31 adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 { 38 cec_pins_a: cec-0 { 41 bias-disable; 42 drive-open-drain; [all …]
|
D | lpc4357-ea4357-devkit.dts | 9 * Released under the terms of 3-clause BSD License 13 /dts-v1/; 18 #include "dt-bindings/input/input.h" 19 #include "dt-bindings/gpio/gpio.h" 23 compatible = "ea,lpc4357-developers-kit", "nxp,lpc4357", "nxp,lpc4350"; 33 stdout-path = &uart0; 42 compatible = "regulator-fixed"; 43 regulator-name = "3v3-supply"; 44 regulator-min-microvolt = <3300000>; 45 regulator-max-microvolt = <3300000>; [all …]
|
D | lpc4350-hitex-eval.dts | 9 * Released under the terms of 3-clause BSD License 13 /dts-v1/; 18 #include "dt-bindings/input/input.h" 19 #include "dt-bindings/gpio/gpio.h" 23 compatible = "hitex,lpc4350-eval-board", "nxp,lpc4350"; 33 stdout-path = &uart0; 42 compatible = "gpio-keys-polled"; 43 poll-interval = <100>; 97 compatible = "gpio-leds"; 102 linux,default-trigger = "heartbeat"; [all …]
|
D | stm32f7-pinctrl.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 3 * Copyright (C) STMicroelectronics 2017 - All Rights Reserved 7 #include <dt-bindings/pinctrl/stm32-pinfunc.h> 8 #include <dt-bindings/mfd/stm32f7-rcc.h> 12 pinctrl: pin-controller { 13 #address-cells = <1>; 14 #size-cells = <1>; 16 interrupt-parent = <&exti>; 18 pins-are-numbered; 21 gpio-controller; [all …]
|
D | zynq-zc706.dts | 1 // SPDX-License-Identifier: GPL-2.0 3 * Copyright (C) 2011 - 2014 Xilinx 6 /dts-v1/; 7 #include "zynq-7000.dtsi" 11 compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000"; 27 stdout-path = "serial0:115200n8"; 31 compatible = "usb-nop-xceiv"; 32 #phy-cells = <0>; 37 ps-clk-frequency = <33333333>; 42 phy-mode = "rgmii-id"; [all …]
|
D | zynq-zc702.dts | 1 // SPDX-License-Identifier: GPL-2.0 3 * Copyright (C) 2011 - 2014 Xilinx 6 /dts-v1/; 7 #include "zynq-7000.dtsi" 11 compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000"; 27 stdout-path = "serial0:115200n8"; 30 gpio-keys { 31 compatible = "gpio-keys"; 37 wakeup-source; 44 wakeup-source; [all …]
|
D | lpc4337-ciaa.dts | 2 * CIAA NXP LPC4337 (http://www.proyecto-ciaa.com.ar) 4 * Copyright (C) 2015 VanguardiaSur - www.vanguardiasur.com.ar 9 * Released under the terms of 3-clause BSD License 12 /dts-v1/; 17 #include "dt-bindings/gpio/gpio.h" 30 stdout-path = &uart2; 40 enet_rmii_pins: enet-rmii-pins { 44 slew-rate = <1>; 45 bias-disable; 46 input-enable; [all …]
|
D | stm32f4-pinctrl.dtsi | 2 * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com> 4 * This file is dual-licensed: you can use it either under the terms 43 #include <dt-bindings/pinctrl/stm32-pinfunc.h> 44 #include <dt-bindings/mfd/stm32f4-rcc.h> 48 pinctrl: pin-controller { 49 #address-cells = <1>; 50 #size-cells = <1>; 52 interrupt-parent = <&exti>; 54 pins-are-numbered; 57 gpio-controller; [all …]
|
D | stm32h743-pinctrl.dtsi | 2 * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com> 4 * This file is dual-licensed: you can use it either under the terms 43 #include <dt-bindings/pinctrl/stm32-pinfunc.h> 47 pin-controller { 48 #address-cells = <1>; 49 #size-cells = <1>; 50 compatible = "st,stm32h743-pinctrl"; 52 interrupt-parent = <&exti>; 54 pins-are-numbered; 57 gpio-controller; [all …]
|
/kernel/linux/linux-5.10/Documentation/devicetree/bindings/pinctrl/ |
D | brcm,bcm11351-pinctrl.txt | 10 - compatible: Must be "brcm,bcm11351-pinctrl" 11 - reg: Base address of the PAD Controller register block and the size 17 compatible = "brcm,bcm11351-pinctrl"; 27 Each pin configuration node is a sub-node of the pin controller node and is a 31 Please refer to the pinctrl-bindings.txt in this directory for details of the 45 details generic pin config properties, please refer to pinctrl-bindings.txt 46 and <include/linux/pinctrl/pinconfig-generic.h>. 54 - pins: Multiple strings. Specifies the name(s) of one or more pins to 59 - function: String. Specifies the pin mux selection. Values 61 - input-schmitt-enable: No arguments. Enable schmitt-trigger mode. [all …]
|
D | nvidia,tegra20-pinmux.txt | 4 - compatible: "nvidia,tegra20-pinmux" 5 - reg: Should contain the register physical address and length for each of 6 the tri-state, mux, pull-up/down, and pad control register sets. 8 Please refer to pinctrl-bindings.txt in this directory for details of the 16 parameters, such as pull-up, tristate, drive strength, etc. 30 Required subnode-properties: 31 - nvidia,pins : An array of strings. Each string contains the name of a pin or 34 Optional subnode-properties: 35 - nvidia,function: A string containing the name of the function to mux to the 38 - nvidia,pull: Integer, representing the pull-down/up to apply to the pin. [all …]
|
D | xlnx,zynq-pinctrl.txt | 4 - compatible: "xlnx,zynq-pinctrl" 5 - syscon: phandle to SLCR 6 - reg: Offset and length of pinctrl space in SLCR 8 Please refer to pinctrl-bindings.txt in this directory for details of the 16 parameters, such as pull-up, slew rate, etc. 25 - groups: A list of pinmux groups. 26 - function: The name of a pinmux function to activate for the specified set 31 - pins: a list of pin names 32 - groups: A list of pinmux groups. 34 The following generic properties as defined in pinctrl-bindings.txt are valid [all …]
|
D | pinctrl-mt6797.txt | 6 - compatible: Value should be one of the following. 7 "mediatek,mt6797-pinctrl", compatible with mt6797 pinctrl. 8 - reg: Should contain address and size for gpio, iocfgl, iocfgb, 10 - reg-names: An array of strings describing the "reg" entries. Must 12 - gpio-controller: Marks the device node as a gpio controller. 13 - #gpio-cells: Should be two. The first cell is the gpio pin number 17 - interrupt-controller: Marks the device node as an interrupt controller. 18 - #interrupt-cells: Should be two. 19 - interrupts : The interrupt outputs from the controller. 21 Please refer to pinctrl-bindings.txt in this directory for details of the [all …]
|
D | nvidia,tegra210-pinmux.txt | 4 - compatible: "nvidia,tegra210-pinmux" 5 - reg: Should contain a list of base address and size pairs for: 6 - first entry: The APB_MISC_GP_*_PADCTRL registers (pad control) 7 - second entry: The PINMUX_AUX_* registers (pinmux) 9 Please refer to pinctrl-bindings.txt in this directory for details of the 17 parameters, such as pull-up, tristate, drive strength, etc. 33 include/dt-binding/pinctrl/pinctrl-tegra.h. 35 Required subnode-properties: 36 - nvidia,pins : An array of strings. Each string contains the name of a pin or 39 Optional subnode-properties: [all …]
|
D | bitmain,bm1880-pinctrl.txt | 7 - compatible: Should be "bitmain,bm1880-pinctrl" 8 - reg: Offset and length of pinctrl space in SCTRL. 10 Please refer to pinctrl-bindings.txt in this directory for details of the 17 includes pinmux and various pin configuration parameters, such as pull-up, 18 slew rate etc... 24 The following generic properties as defined in pinctrl-bindings.txt are valid 29 - pins: An array of strings, each string containing the name of a pin. 32 MIO0 - MIO111 34 - groups: An array of strings, each string containing the name of a pin 65 - function: An array of strings, each string containing the name of the [all …]
|
/kernel/linux/linux-5.10/include/linux/platform_data/ |
D | ad5755.h | 1 /* SPDX-License-Identifier: GPL-2.0-only */ 70 * struct ad5755_platform_data - AD5755 DAC driver platform data 71 * @ext_dc_dc_compenstation_resistor: Whether an external DC-DC converter 73 * @dc_dc_phase: DC-DC converter phase. 74 * @dc_dc_freq: DC-DC converter frequency. 75 * @dc_dc_maxv: DC-DC maximum allowed boost voltage. 80 * @dac.slew.enable: Whether to enable digital slew. 81 * @dac.slew.rate: Slew rate of the digital slew. 82 * @dac.slew.step_size: Slew step size of the digital slew. 96 enum ad5755_slew_rate rate; member [all …]
|
/kernel/linux/linux-5.10/Documentation/devicetree/bindings/iio/dac/ |
D | ad5755.txt | 1 * Analog Devices AD5755 IIO Multi-Channel DAC Linux Driver 4 - compatible: Has to contain one of the following: 6 adi,ad5755-1 11 - reg: spi chip select number for the device 12 - spi-cpha or spi-cpol: is the only modes that is supported 15 - spi-max-frequency: Definition as per 16 Documentation/devicetree/bindings/spi/spi-bus.txt 19 See include/dt-bindings/iio/ad5755.h 20 - adi,ext-dc-dc-compenstation-resistor: boolean set if the hardware have an 23 - adi,dc-dc-phase: [all …]
|
/kernel/linux/linux-5.10/arch/arm64/boot/dts/hisilicon/ |
D | poplar-pinctrl.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (c) 2016-2018 HiSilicon Technologies Co., Ltd. 8 #include <dt-bindings/pinctrl/hisi.h> 19 emmc_pins_1: emmc-pins-1 { 20 pinctrl-single,pins = < 31 pinctrl-single,bias-pulldown = < 34 pinctrl-single,bias-pullup = < 37 pinctrl-single,slew-rate = < 40 pinctrl-single,drive-strength = < 45 emmc_pins_2: emmc-pins-2 { [all …]
|
/kernel/linux/linux-5.10/drivers/iio/dac/ |
D | ad5755.c | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * AD5755, AD5755-1, AD5757, AD5735, AD5737 Digital to analog converters driver 67 * struct ad5755_chip_info - chip specific information 79 * struct ad5755_state - driver instance specific data 164 st->data[0].d32 = cpu_to_be32((reg << 16) | val); in ad5755_write_unlocked() 166 return spi_write(st->spi, &st->data[0].d8[1], 3); in ad5755_write_unlocked() 182 mutex_lock(&st->lock); in ad5755_write() 184 mutex_unlock(&st->lock); in ad5755_write() 195 mutex_lock(&st->lock); in ad5755_write_ctrl() 197 mutex_unlock(&st->lock); in ad5755_write_ctrl() [all …]
|
/kernel/linux/linux-5.10/drivers/net/can/cc770/ |
D | cc770_platform.c | 1 // SPDX-License-Identifier: GPL-2.0-only 10 * in your board-specific code: 29 * interrupt-parent = <&mpic>; 30 * bosch,external-clock-frequency = <16000000>; 53 MODULE_DESCRIPTION("Socket-CAN driver for CC770 on the platform bus"); 61 return ioread8(priv->reg_base + reg); in cc770_platform_read_reg() 67 iowrite8(val, priv->reg_base + reg); in cc770_platform_write_reg() 73 struct device_node *np = pdev->dev.of_node; in cc770_get_of_node_data() 78 prop = of_get_property(np, "bosch,external-clock-frequency", in cc770_get_of_node_data() 84 priv->can.clock.freq = clkext; in cc770_get_of_node_data() [all …]
|
/kernel/linux/linux-5.10/Documentation/devicetree/bindings/phy/ |
D | phy-mtk-xsphy.txt | 1 MediaTek XS-PHY binding 2 -------------------------- 4 The XS-PHY controller supports physical layer functionality for USB3.1 8 - compatible : should be "mediatek,<soc-model>-xsphy", "mediatek,xsphy", 9 soc-model is the name of SoC, such as mt3611 etc; 12 - "mediatek,mt3611-xsphy" 14 - #address-cells, #size-cells : should use the same values as the root node 15 - ranges: must be present 18 - reg : offset and length of register shared by multiple U3 ports, 21 - mediatek,src-ref-clk-mhz : u32, frequency of reference clock for slew rate [all …]
|
D | nvidia,tegra20-usb-phy.txt | 6 - compatible : For Tegra20, must contain "nvidia,tegra20-usb-phy". 7 For Tegra30, must contain "nvidia,tegra30-usb-phy". Otherwise, must contain 8 "nvidia,<chip>-usb-phy" plus at least one of the above, where <chip> is 10 - reg : Defines the following set of registers, in the order listed: 11 - The PHY's own register set. 13 - The register set of the PHY containing the UTMI pad control registers. 14 Present if-and-only-if phy_type == utmi. 15 - phy_type : Should be one of "utmi", "ulpi" or "hsic". 16 - clocks : Defines the clocks listed in the clock-names property. 17 - clock-names : The following clock names must be present: [all …]
|
/kernel/linux/linux-5.10/Documentation/devicetree/bindings/regulator/ |
D | vctrl.txt | 5 -------------------- 6 - compatible : must be "vctrl-regulator". 7 - regulator-min-microvolt : smallest voltage consumers may set 8 - regulator-max-microvolt : largest voltage consumers may set 9 - ctrl-supply : The regulator supplying the control voltage. 10 - ctrl-voltage-range : an array of two integer values describing the range 13 regulator-min/max-microvolt output voltage. 16 -------------------- 17 - ovp-threshold-percent : overvoltage protection (OVP) threshold of the 28 - min-slew-down-rate : Describes how slowly the regulator voltage will decay [all …]
|
/kernel/linux/linux-5.10/Documentation/devicetree/bindings/net/can/ |
D | cc770.txt | 8 - compatible : should be "bosch,cc770" for the CC770 and "intc,82527" 11 - reg : should specify the chip select, address offset and size required 14 - interrupts : property with a value describing the interrupt source 19 - bosch,external-clock-frequency : frequency of the external oscillator 24 - bosch,clock-out-frequency : slock frequency in Hz on the CLKOUT pin. 28 - bosch,slew-rate : slew rate of the CLKOUT signal. If not specified, 31 - bosch,disconnect-rx0-input : see data sheet. 33 - bosch,disconnect-rx1-input : see data sheet. 35 - bosch,disconnect-tx1-output : see data sheet. 37 - bosch,polarity-dominant : see data sheet. [all …]
|