Searched +full:vdd +full:- +full:supply (Results 1 – 25 of 511) sorted by relevance
12345678910>>...21
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/regulator/ |
| D | qcom,rpmh-regulator.txt | 3 rpmh-regulator devices support PMIC regulator management via the Voltage
10 enable state of any PMIC peripheral. It is used for clock buffers, low-voltage
25 PM8005: smps1 - smps4
26 PM8009: smps1 - smps2, ldo1 - ldo7
27 PM8150: smps1 - smps10, ldo1 - ldo18
28 PM8150L: smps1 - smps8, ldo1 - ldo11, bob, flash, rgb
29 PM8998: smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
31 PM6150: smps1 - smps5, ldo1 - ldo19
32 PM6150L: smps1 - smps8, ldo1 - ldo11, bob
35 First Level Nodes - PMIC
[all …]
|
| D | regulator-max77620.txt | 3 Device has multiple DCDC(sd[0-3] and LDOs(ldo[0-8]). The input supply
6 sub-node "regulators" which is child node of device node.
14 -------------------
15 The input supply of regulators are the optional properties on the
16 parent device node. The input supply of these regulators are provided
18 in-sd0-supply: Input supply for SD0, INA-SD0 or INB-SD0 pins.
19 in-sd1-supply: Input supply for SD1.
20 in-sd2-supply: Input supply for SD2.
21 in-sd3-supply: Input supply for SD3.
22 in-ldo0-1-supply: Input supply for LDO0 and LDO1.
[all …]
|
| D | st,stm32mp1-pwr-reg.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/regulator/st,stm32mp1-pwr-reg.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Pascal Paillet <p.paillet@st.com>
14 const: st,stm32mp1,pwr-reg
19 vdd-supply:
20 description: Input supply phandle(s) for vdd input
22 vdd_3v3_usbfs-supply:
23 description: Input supply phandle(s) for vdd_3v3_usbfs input
[all …]
|
| /kernel/linux/linux-5.10/arch/arm64/boot/dts/qcom/ |
| D | sm8150-mtp.dts | 1 // SPDX-License-Identifier: BSD-3-Clause
3 * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
7 /dts-v1/;
9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
10 #include <dt-bindings/gpio/gpio.h>
18 compatible = "qcom,sm8150-mtp";
25 stdout-path = "serial0:115200n8";
28 vph_pwr: vph-pwr-regulator {
29 compatible = "regulator-fixed";
30 regulator-name = "vph_pwr";
[all …]
|
| D | sm8250-mtp.dts | 1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
17 compatible = "qcom,sm8250-mtp", "qcom,sm8250";
24 stdout-path = "serial0:115200n8";
27 vph_pwr: vph-pwr-regulator {
28 compatible = "regulator-fixed";
29 regulator-name = "vph_pwr";
30 regulator-min-microvolt = <3700000>;
31 regulator-max-microvolt = <3700000>;
[all …]
|
| D | sdm845-mtp.dts | 1 // SPDX-License-Identifier: GPL-2.0
8 /dts-v1/;
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
16 compatible = "qcom,sdm845-mtp", "qcom,sdm845";
23 stdout-path = "serial0:115200n8";
26 vph_pwr: vph-pwr-regulator {
27 compatible = "regulator-fixed";
28 regulator-name = "vph_pwr";
29 regulator-min-microvolt = <3700000>;
[all …]
|
| D | qrb5165-rb5.dts | 1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
17 compatible = "qcom,qrb5165-rb5", "qcom,sm8250";
24 stdout-path = "serial0:115200n8";
27 dc12v: dc12v-regulator {
28 compatible = "regulator-fixed";
29 regulator-name = "DC12V";
30 regulator-min-microvolt = <12000000>;
[all …]
|
| D | sdm845-db845c.dts | 1 // SPDX-License-Identifier: GPL-2.0
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
10 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
11 #include <dt-bindings/sound/qcom,q6afe.h>
12 #include <dt-bindings/sound/qcom,q6asm.h>
27 stdout-path = "serial0:115200n8";
30 dc12v: dc12v-regulator {
31 compatible = "regulator-fixed";
[all …]
|
| D | sdm845-cheza.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
26 stdout-path = "serial0:115200n8";
30 compatible = "pwm-backlight";
32 enable-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
33 power-supply = <&ppvar_sys>;
34 pinctrl-names = "default";
35 pinctrl-0 = <&ap_edp_bklten>;
[all …]
|
| D | sdm850-lenovo-yoga-c630.dts | 1 // SPDX-License-Identifier: BSD-3-Clause
8 /dts-v1/;
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
12 #include <dt-bindings/sound/qcom,q6afe.h>
13 #include <dt-bindings/sound/qcom,q6asm.h>
19 compatible = "lenovo,yoga-c630", "qcom,sdm845";
27 firmware-name = "qcom/LENOVO/81JL/qcadsp850.mbn";
32 pm8998-rpmh-regulators {
33 compatible = "qcom,pm8998-rpmh-regulators";
[all …]
|
| D | qcs404-evb.dtsi | 1 // SPDX-License-Identifier: GPL-2.0
4 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
17 stdout-path = "serial0";
20 vph_pwr: vph-pwr-regulator {
21 compatible = "regulator-fixed";
22 regulator-name = "vph_pwr";
23 regulator-always-on;
24 regulator-boot-on;
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/sound/ |
| D | qcom,wcd9335.txt | 3 Qualcomm WCD9335 Codec is a standalone Hi-Fi audio codec IC, supports
5 the MSM8996, MSM8976, and MSM8956 chipsets. It has in-built
11 - compatible:
21 - reg
26 - interrupts
28 Value type: <prop-encoded-array>
31 - interrupt-names:
37 - reset-gpios:
42 - slim-ifc-dev:
47 - clocks:
[all …]
|
| D | qcom,wcd934x.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
13 Qualcomm WCD9340/WCD9341 Codec is a standalone Hi-Fi audio codec IC.
14 It has in-built Soundwire controller, pin controller, interrupt mux and
27 reset-gpios:
31 slim-ifc-dev: true
36 clock-names:
39 vdd-buck-supply:
[all …]
|
| D | everest,es7134.txt | 4 - compatible : "everest,es7134" or
7 - VDD-supply : regulator phandle for the VDD supply
8 - PVDD-supply: regulator phandle for the PVDD supply for the es7154
12 i2s_codec: external-codec {
14 VDD-supply = <&vcc_5v>;
|
| D | qcom,msm8916-wcd-analog.txt | 8 - compatible = "qcom,pm8916-wcd-analog-codec";
9 - reg: represents the slave base address provided to the peripheral.
10 - interrupts: List of interrupts in given SPMI peripheral.
11 - interrupt-names: Names specified to above list of interrupts in same
13 "cdc_spk_cnp_int" - Speaker click and pop interrupt.
14 "cdc_spk_clip_int" - Speaker clip interrupt.
15 "cdc_spk_ocp_int" - Speaker over current protect interrupt.
16 "mbhc_ins_rem_det1" - jack insert removal detect interrupt 1.
17 "mbhc_but_rel_det" - button release interrupt.
18 "mbhc_but_press_det" - button press event
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/opp/ |
| D | ti-omap5-opp-supply.txt | 1 Texas Instruments OMAP compatible OPP supply description
9 Also, some supplies may have an associated vbb-supply which is an Adaptive Body
11 to the vdd-supply and clk when making an OPP transition. By supplying two
19 - vdd-supply: phandle to regulator controlling VDD supply
20 - vbb-supply: phandle to regulator controlling Body Bias supply
23 Required Properties for opp-supply node:
24 - compatible: Should be one of:
25 "ti,omap-opp-supply" - basic OPP supply controlling VDD and VBB
26 "ti,omap5-opp-supply" - OMAP5+ optimized voltages in efuse(class0)VDD
28 "ti,omap5-core-opp-supply" - OMAP5+ optimized voltages in efuse(class0) VDD
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/media/ |
| D | samsung-s5c73m3.txt | 2 ------------------------------
4 The S5C73M3 camera ISP supports MIPI CSI-2 and parallel (ITU-R BT.656) video
11 ---------------------
15 - compatible : "samsung,s5c73m3";
16 - reg : I2C slave address of the sensor;
17 - vdd-int-supply : digital power supply (1.2V);
18 - vdda-supply : analog power supply (1.2V);
19 - vdd-reg-supply : regulator input power supply (2.8V);
20 - vddio-host-supply : host I/O power supply (1.8V to 2.8V);
21 - vddio-cis-supply : CIS I/O power supply (1.2V to 1.8V);
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/iio/dac/ |
| D | mcp4725.txt | 4 - compatible: Must be "microchip,mcp4725" or "microchip,mcp4726"
5 - reg: Should contain the DAC I2C address
6 - vdd-supply: Phandle to the Vdd power supply. This supply is used as a
8 mcp4726 if there is no vref-supply specified.
11 - vref-supply: Optional phandle to the Vref power supply. Vref pin is
12 used as a voltage reference when this supply is specified.
13 - microchip,vref-buffered: Boolean to enable buffering of the external
14 Vref pin. This boolean is not valid without the vref-supply. Quoting
25 vdd-supply = <&vdac_vdd>;
32 vdd-supply = <&vdac_vdd>;
[all …]
|
| D | ad7303.txt | 4 - compatible: Must be "adi,ad7303"
5 - reg: SPI chip select number for the device
6 - spi-max-frequency: Max SPI frequency to use (< 30000000)
7 - Vdd-supply: Phandle to the Vdd power supply
10 - REF-supply: Phandle to the external reference voltage supply. This should
12 pin. If the property is not set Vdd/2 is used as the reference voltage.
19 spi-max-frequency = <10000000>;
20 Vdd-supply = <&vdd_supply>;
21 adi,use-external-reference;
22 REF-supply = <&vref_supply>;
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/phy/ |
| D | qcom,usb-hs-28nm.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: "http://devicetree.org/schemas/phy/qcom,usb-hs-28nm.yaml#"
5 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
7 title: Qualcomm Synopsys DesignWare Core 28nm High-Speed PHY
10 - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
13 Qualcomm Low-Speed, Full-Speed, Hi-Speed 28nm USB PHY
18 - qcom,usb-hs-28nm-femtophy
23 "#phy-cells":
28 - description: rpmcc ref clock
[all …]
|
| D | qcom,usb-ss.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: "http://devicetree.org/schemas/phy/qcom,usb-ss.yaml#"
5 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
10 - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
18 - qcom,usb-ss-28nm-phy
23 "#phy-cells":
28 - description: rpmcc clock
29 - description: PHY AHB clock
30 - description: SuperSpeed pipe clock
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/net/wireless/ |
| D | qcom,ath10k.txt | 4 - compatible: Should be one of the following:
6 * "qcom,ipq4019-wifi"
7 * "qcom,wcn3990-wifi"
10 data along with board specific data via "qcom,ath10k-calibration-data".
13 AHB based devices (i.e. ipq4019) uses compatible string "qcom,ipq4019-wifi"
15 "qcom,ath10k-calibration-data"). It uses "qcom,ath10k-pre-calibration-data"
18 In general, entry "qcom,ath10k-pre-calibration-data" and
19 "qcom,ath10k-calibration-data" conflict with each other and only one
22 SNOC based devices (i.e. wcn3990) uses compatible string "qcom,wcn3990-wifi".
24 - reg: Address and length of the register set for the device.
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/display/panel/ |
| D | elida,kd35t133.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
13 - $ref: panel-common.yaml#
20 reset-gpios: true
21 iovcc-supply:
23 vdd-supply:
24 description: regulator that supplies the vdd voltage
27 - compatible
[all …]
|
| /kernel/linux/linux-5.10/arch/arm/boot/dts/ |
| D | ste-href-tvk1281618-r3.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-or-later
6 #include "ste-href-tvk1281618.dtsi"
12 compatible = "st,lsm303dlhc-accel";
13 st,drdy-int-pin = <1>;
15 vdd-supply = <&ab8500_ldo_aux1_reg>;
16 vddio-supply = <&db8500_vsmps2_reg>;
17 interrupt-parent = <&gpio2>;
20 pinctrl-names = "default";
21 pinctrl-0 = <&accel_tvk_mode>;
22 mount-matrix = "0", "-1", "0",
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/iio/imu/ |
| D | invensense,icm42600.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: InvenSense ICM-426xx Inertial Measurement Unit
10 - Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
13 6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis
18 ultra-low-power wake-on-motion support to minimize system power consumption.
20 Other industry-leading features include InvenSense on-chip APEX Motion
25 https://invensense.tdk.com/wp-content/uploads/2020/03/DS-000292-ICM-42605-v1.4.pdf
30 - invensense,icm42600
[all …]
|
12345678910>>...21