Lines Matching +full:codec +full:- +full:gpio5
1 // SPDX-License-Identifier: GPL-2.0
3 * Device Tree Source for the iWave-RZ/G1H Qseven board
9 * SSI-SGTL5000
31 /dts-v1/;
32 #include "r8a7742-iwg21m.dtsi"
35 model = "iWave Systems RainboW-G21D-Qseven board based on RZ/G1H";
46 stdout-path = "serial2:115200n8";
50 compatible = "fixed-clock";
51 #clock-cells = <0>;
52 clock-frequency = <26000000>;
56 compatible = "gpio-leds";
59 label = "sdio-led";
60 gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;
61 linux,default-trigger = "mmc1";
66 compatible = "regulator-fixed";
67 regulator-name = "1P5V";
68 regulator-min-microvolt = <1500000>;
69 regulator-max-microvolt = <1500000>;
70 regulator-always-on;
74 compatible = "simple-audio-card";
75 simple-audio-card,format = "i2s";
76 simple-audio-card,bitclock-master = <&sndcodec>;
77 simple-audio-card,frame-master = <&sndcodec>;
79 sndcpu: simple-audio-card,cpu {
80 sound-dai = <&rcar_sound>;
83 sndcodec: simple-audio-card,codec {
84 sound-dai = <&sgtl5000>;
88 vcc_sdhi2: regulator-vcc-sdhi2 {
89 compatible = "regulator-fixed";
91 regulator-name = "SDHI2 Vcc";
92 regulator-min-microvolt = <3300000>;
93 regulator-max-microvolt = <3300000>;
98 vccq_sdhi2: regulator-vccq-sdhi2 {
99 compatible = "regulator-gpio";
101 regulator-name = "SDHI2 VccQ";
102 regulator-min-microvolt = <1800000>;
103 regulator-max-microvolt = <3300000>;
106 gpios-states = <1>;
112 pinctrl-0 = <&avb_pins>;
113 pinctrl-names = "default";
115 phy-handle = <&phy3>;
116 phy-mode = "gmii";
117 renesas,no-ether-link;
120 phy3: ethernet-phy@3 {
122 micrel,led-mode = <1>;
127 pinctrl-0 = <&i2c2_pins>;
128 pinctrl-names = "default";
131 clock-frequency = <400000>;
133 sgtl5000: codec@a {
135 #sound-dai-cells = <0>;
138 VDDA-supply = <®_3p3v>;
139 VDDIO-supply = <®_3p3v>;
140 VDDD-supply = <®_1p5v>;
145 pinctrl-0 = <&can1_pins>;
146 pinctrl-names = "default";
156 can-trx-en-gpio{
157 gpio-hog;
159 output-low;
160 line-name = "can-trx-en-gpio";
165 pinctrl-0 = <&usb0_pins>;
166 pinctrl-names = "default";
171 pinctrl-0 = <&msiof0_pins>;
172 pinctrl-names = "default";
173 cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
178 compatible = "sst,sst25vf016b", "jedec,spi-nor";
180 spi-max-frequency = <50000000>;
181 m25p,fast-read;
184 compatible = "fixed-partitions";
185 #address-cells = <1>;
186 #size-cells = <1>;
197 pinctrl-0 = <&usb0_pins>;
198 pinctrl-names = "default";
204 pinctrl-0 = <&usb1_pins>;
205 pinctrl-names = "default";
215 clock-frequency = <100000000>;
220 * ON = PCIe X4 (connector-J7)
221 * OFF = mini-PCIe (connector-J26)
260 power-source = <3300>;
266 power-source = <1800>;
286 pinctrl-0 = <&sound_pins>;
287 pinctrl-names = "default";
291 #sound-dai-cells = <0>;
302 timeout-sec = <60>;
307 pinctrl-0 = <&scifa2_pins>;
308 pinctrl-names = "default";
314 pinctrl-0 = <&scifb2_pins>;
315 pinctrl-names = "default";
317 uart-has-rtscts;
322 pinctrl-0 = <&sdhi2_pins>;
323 pinctrl-1 = <&sdhi2_pins_uhs>;
324 pinctrl-names = "default", "state_uhs";
326 vmmc-supply = <&vcc_sdhi2>;
327 vqmmc-supply = <&vccq_sdhi2>;
328 cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
329 wp-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
330 sd-uhs-sdr50;
335 shared-pin;