Lines Matching +full:2 +full:- +full:way
1 0 Unnamed devices (e.g. non-device mounts)
7 2 = /dev/kmem Kernel virtual memory access
11 6 = /dev/core OBSOLETE - replaced by /proc/kcore
18 12 = /dev/oldmem OBSOLETE - replaced by /proc/vmcore
31 2 char Pseudo-TTY masters
37 Pseudo-tty's are named as follows:
40 the 1st through 16th series of 16 pseudo-ttys each, and
44 These are the old-style (BSD) PTY devices; Unix98
49 2 block Floppy disks
52 2 = /dev/fd2 Controller 0, drive 2, autodetect
56 130 = /dev/fd6 Controller 1, drive 2, autodetect
73 12 = /dev/fd?u360 3.5" 360K Double Density(2)
75 120 = /dev/fd?u800 3.5" 800K Double Density(2)
96 (2) Autodetectable format in a Double Density (720K) drive only
106 3 char Pseudo-TTY slaves
112 These are the old-style (BSD) PTY devices; Unix98
115 3 block First MFM, RLL and IDE hard disk/CD-ROM interface
116 0 = /dev/hda Master: whole disk (or CD-ROM)
117 64 = /dev/hdb Slave: whole disk (or CD-ROM)
122 2 = /dev/hd?2 Second partition
126 For Linux/i386, partitions 1-4 are the primary
145 is no longer supported. Use major numbers 2 and 3.
149 because the root filesystem is mounted read-only.
156 2 = /dev/ptmx PTY master multiplex
200 8 block SCSI disk devices (0-15)
207 Partitions are handled in the same way as for IDE
218 64 = /dev/st0m First SCSI tape, mode 2
219 65 = /dev/st1m Second SCSI tape, mode 2
230 192 = /dev/nst0m First SCSI tape, mode 2, no rewind
231 193 = /dev/nst1m Second SCSI tape, mode 2, no rewind
250 10 char Non-serial mice, misc features
252 1 = /dev/psaux PS/2-style mouse port
253 2 = /dev/inportbm Microsoft Inport bus mouse
255 4 = /dev/jbm J-mouse
261 9 = /dev/pc110pad IBM PC-110 digitizer pad
278 141 = /dev/relay16 Berkshire Products ISO-16 relay card
281 144 = /dev/nvram Non-volatile configuration RAM
298 161 = /dev/userdma User-space DMA access
316 179 = /dev/xsvc High-speed shared-mem/semaphore service
319 182 = /dev/perfctr Performance-monitoring counters
329 193 = /dev/d7s SPARC 7-segment display
330 194 = /dev/zkshim Zero-Knowledge network shim control
331 195 = /dev/elographics/e2201 Elographics touchscreen E271-2201
333 197 = /dev/pxa3xx-gcu PXA3xx graphics controller unit driver
337 201 = /dev/button/gulpb Transmeta GULP-B buttons
339 203 = /dev/cuse Cuse (character device in user-space)
350 214 = /dev/watchdogs/2 Third watchdog device
354 218 = /dev/kchuid Inter-process chuid control
365 229 = /dev/fuse Fuse (virtual filesystem in user-space)
368 232 = /dev/kvm Kernel-based virtual machine (hardware virtualization extensions)
369 233 = /dev/kmview View-OS A process with a view
370 234 = /dev/btrfs-control Btrfs control device
372 236 = /dev/mapper/control Device-Mapper control device
373 237 = /dev/loop-control Loopback control device
374 238 = /dev/vhost-net Host kernel accelerator for virtio net
375 239 = /dev/uhid User-space I/O driver support for HID subsystem
377 241 = /dev/vhost-vsock Host kernel driver for virtio vsock
380 243-254 Reserved for local use
386 11 char Serial Mux device (Linux/PA-RISC only)
391 11 block SCSI CD-ROM devices
392 0 = /dev/scd0 First SCSI CD-ROM
393 1 = /dev/scd1 Second SCSI CD-ROM
398 12 char QIC-02 tape
399 2 = /dev/ntpqic11 QIC-11, no rewind-on-close
400 3 = /dev/tpqic11 QIC-11, rewind-on-close
401 4 = /dev/ntpqic24 QIC-24, no rewind-on-close
402 5 = /dev/tpqic24 QIC-24, rewind-on-close
403 6 = /dev/ntpqic120 QIC-120, no rewind-on-close
404 7 = /dev/tpqic120 QIC-120, rewind-on-close
405 8 = /dev/ntpqic150 QIC-150, no rewind-on-close
406 9 = /dev/tpqic150 QIC-150, rewind-on-close
408 The device names specified are proposed -- if there
433 2 = /dev/midi00 First MIDI port
435 4 = /dev/audio Sun-compatible digital audio
438 8 = /dev/sequencer2 Sequencer -- alternate device
457 15 block Sony CDU-31A/CDU-33A CD-ROM
458 0 = /dev/sonycd Sony CDU-31a CD-ROM
460 16 char Non-SCSI scanners
463 16 block GoldStar CD-ROM
464 0 = /dev/gscd GoldStar CD-ROM
470 17 block Optics Storage CD-ROM
471 0 = /dev/optcd Optics Storage CD-ROM
473 18 char OBSOLETE (was Chase serial card - alternate devices)
477 18 block Sanyo CD-ROM
478 0 = /dev/sjcd Sanyo CD-ROM
496 20 char Cyclades serial card - alternate devices
501 20 block Hitachi CD-ROM (under development)
502 0 = /dev/hitcd Hitachi CD-ROM
512 device-naming practice.
518 This device is used on the ARM-based Acorn RiscPC.
519 Partitions are handled the same way as for IDE disks
526 22 block Second IDE hard disk/CD-ROM interface
527 0 = /dev/hdc Master: whole disk (or CD-ROM)
528 64 = /dev/hdd Slave: whole disk (or CD-ROM)
530 Partitions are handled the same way as for the first
533 23 char Digiboard serial card - alternate devices
537 23 block Mitsumi proprietary CD-ROM
538 0 = /dev/mcd Mitsumi CD-ROM
547 128 = /dev/ttyE128 Stallion port 0 card 2
548 129 = /dev/ttyE129 Stallion port 1 card 2
553 24 block Sony CDU-535 CD-ROM
554 0 = /dev/cdu535 Sony CDU-535 CD-ROM
556 25 char Stallion serial card - alternate devices
569 25 block First Matsushita (Panasonic/SoundBlaster) CD-ROM
570 0 = /dev/sbpcd0 Panasonic CD-ROM controller 0 unit 0
571 1 = /dev/sbpcd1 Panasonic CD-ROM controller 0 unit 1
572 2 = /dev/sbpcd2 Panasonic CD-ROM controller 0 unit 2
573 3 = /dev/sbpcd3 Panasonic CD-ROM controller 0 unit 3
577 26 block Second Matsushita (Panasonic/SoundBlaster) CD-ROM
578 0 = /dev/sbpcd4 Panasonic CD-ROM controller 1 unit 0
579 1 = /dev/sbpcd5 Panasonic CD-ROM controller 1 unit 1
580 2 = /dev/sbpcd6 Panasonic CD-ROM controller 1 unit 2
581 3 = /dev/sbpcd7 Panasonic CD-ROM controller 1 unit 3
583 27 char QIC-117 tape
584 0 = /dev/qft0 Unit 0, rewind-on-close
585 1 = /dev/qft1 Unit 1, rewind-on-close
586 2 = /dev/qft2 Unit 2, rewind-on-close
587 3 = /dev/qft3 Unit 3, rewind-on-close
588 4 = /dev/nqft0 Unit 0, no rewind-on-close
589 5 = /dev/nqft1 Unit 1, no rewind-on-close
590 6 = /dev/nqft2 Unit 2, no rewind-on-close
591 7 = /dev/nqft3 Unit 3, no rewind-on-close
592 16 = /dev/zqft0 Unit 0, rewind-on-close, compression
593 17 = /dev/zqft1 Unit 1, rewind-on-close, compression
594 18 = /dev/zqft2 Unit 2, rewind-on-close, compression
595 19 = /dev/zqft3 Unit 3, rewind-on-close, compression
596 20 = /dev/nzqft0 Unit 0, no rewind-on-close, compression
597 21 = /dev/nzqft1 Unit 1, no rewind-on-close, compression
598 22 = /dev/nzqft2 Unit 2, no rewind-on-close, compression
599 23 = /dev/nzqft3 Unit 3, no rewind-on-close, compression
600 32 = /dev/rawqft0 Unit 0, rewind-on-close, no file marks
601 33 = /dev/rawqft1 Unit 1, rewind-on-close, no file marks
602 34 = /dev/rawqft2 Unit 2, rewind-on-close, no file marks
603 35 = /dev/rawqft3 Unit 3, rewind-on-close, no file marks
604 36 = /dev/nrawqft0 Unit 0, no rewind-on-close, no file marks
605 37 = /dev/nrawqft1 Unit 1, no rewind-on-close, no file marks
606 38 = /dev/nrawqft2 Unit 2, no rewind-on-close, no file marks
607 39 = /dev/nrawqft3 Unit 3, no rewind-on-close, no file marks
609 27 block Third Matsushita (Panasonic/SoundBlaster) CD-ROM
610 0 = /dev/sbpcd8 Panasonic CD-ROM controller 2 unit 0
611 1 = /dev/sbpcd9 Panasonic CD-ROM controller 2 unit 1
612 2 = /dev/sbpcd10 Panasonic CD-ROM controller 2 unit 2
613 3 = /dev/sbpcd11 Panasonic CD-ROM controller 2 unit 3
615 28 char Stallion serial card - card programming
618 2 = /dev/staliomem2 Third Stallion card I/O memory
625 28 block Fourth Matsushita (Panasonic/SoundBlaster) CD-ROM
626 0 = /dev/sbpcd12 Panasonic CD-ROM controller 3 unit 0
627 1 = /dev/sbpcd13 Panasonic CD-ROM controller 3 unit 1
628 2 = /dev/sbpcd14 Panasonic CD-ROM controller 3 unit 2
629 3 = /dev/sbpcd15 Panasonic CD-ROM controller 3 unit 3
638 Partitions are handled in the same way as for IDE
648 29 block Aztech/Orchid/Okano/Wearnes CD-ROM
649 0 = /dev/aztcd Aztech CD-ROM
651 30 char iBCS-2 compatibility devices
665 Additionally, iBCS-2 requires the following links:
667 /dev/ip -> /dev/inet/ip
668 /dev/icmp -> /dev/inet/icmp
669 /dev/ggp -> /dev/inet/ggp
670 /dev/ipip -> /dev/inet/ipip
671 /dev/tcp -> /dev/inet/tcp
672 /dev/egp -> /dev/inet/egp
673 /dev/pup -> /dev/inet/pup
674 /dev/udp -> /dev/inet/udp
675 /dev/idp -> /dev/inet/idp
676 /dev/rawip -> /dev/inet/rawip
677 /dev/inet/arp -> /dev/inet/udp
678 /dev/inet/rip -> /dev/inet/udp
679 /dev/nfsd -> /dev/socksys
680 /dev/X0R -> /dev/null (? apparently not required ?)
682 30 block Philips LMS CM-205 CD-ROM
683 0 = /dev/cm205cd Philips LMS CM-205 CD-ROM
686 driver does not work with the CM-205MS CD-ROM.
688 31 char MPU-401 MIDI
689 0 = /dev/mpu401data MPU-401 data port
690 1 = /dev/mpu401stat MPU-401 status port
706 The read-write (rw) devices support back-caching
708 devices. The read-only devices (ro) support reading
715 32 block Philips LMS CM-206 CD-ROM
716 0 = /dev/cm206cd Philips LMS CM-206 CD-ROM
718 33 char Specialix serial card - alternate devices
722 33 block Third IDE hard disk/CD-ROM interface
723 0 = /dev/hde Master: whole disk (or CD-ROM)
724 64 = /dev/hdf Slave: whole disk (or CD-ROM)
726 Partitions are handled the same way as for the first
732 2 = /dev/scc2 Second Z8530, first port
740 34 block Fourth IDE hard disk/CD-ROM interface
741 0 = /dev/hdg Master: whole disk (or CD-ROM)
742 64 = /dev/hdh Slave: whole disk (or CD-ROM)
744 Partitions are handled the same way as for the first
750 2 = /dev/midi2 Third MIDI port, kernel timed
778 128 = /dev/nht0 First IDE tape, no rewind-on-close
779 129 = /dev/nht1 Second IDE tape, no rewind-on-close
798 39 char ML-16P experimental I/O board
799 0 = /dev/ml16pa-a0 First card, first analog channel
800 1 = /dev/ml16pa-a1 First card, second analog channel
802 15 = /dev/ml16pa-a15 First card, 16th analog channel
803 16 = /dev/ml16pa-d First card, digital lines
804 17 = /dev/ml16pa-c0 First card, first counter/timer
805 18 = /dev/ml16pa-c1 First card, second counter/timer
806 19 = /dev/ml16pa-c2 First card, third counter/timer
807 32 = /dev/ml16pb-a0 Second card, first analog channel
808 33 = /dev/ml16pb-a1 Second card, second analog channel
810 47 = /dev/ml16pb-a15 Second card, 16th analog channel
811 48 = /dev/ml16pb-d Second card, digital lines
812 49 = /dev/ml16pb-c0 Second card, first counter/timer
813 50 = /dev/ml16pb-c1 Second card, second counter/timer
814 51 = /dev/ml16pb-c2 Second card, third counter/timer
859 44 char isdn4linux virtual modem - alternate devices
871 Partitions are handled in the same way as for IDE
895 Partitions are handled in the same way as for IDE
903 46 block Parallel port ATAPI CD-ROM devices
904 0 = /dev/pcd0 First parallel port ATAPI CD-ROM
905 1 = /dev/pcd1 Second parallel port ATAPI CD-ROM
906 2 = /dev/pcd2 Third parallel port ATAPI CD-ROM
907 3 = /dev/pcd3 Fourth parallel port ATAPI CD-ROM
909 47 char Comtrol Rocketport serial card - alternate devices
916 2 = /dev/pf2 Third parallel port ATAPI disk
938 49 char SDL RISCom serial card - alternate devices
958 51 char Baycom radio modem OR Radio Tech BIM-XXX-RS232 radio modem
973 2 = /dev/dcbri2 Third DataComm card
987 2 = /dev/pd_bdm2 PD BDM interface on lp2
1009 2 = /dev/holter2 Third Holter port
1013 24-hour heart monitoring equipment.
1040 56 block Fifth IDE hard disk/CD-ROM interface
1041 0 = /dev/hdi Master: whole disk (or CD-ROM)
1042 64 = /dev/hdj Slave: whole disk (or CD-ROM)
1044 Partitions are handled the same way as for the first
1052 57 block Sixth IDE hard disk/CD-ROM interface
1053 0 = /dev/hdk Master: whole disk (or CD-ROM)
1054 64 = /dev/hdl Slave: whole disk (or CD-ROM)
1056 Partitions are handled the same way as for the first
1059 58 char Hayes ESP serial card - alternate devices
1080 NAMING CONFLICT -- PROPOSED REVISED NAME /dev/rpda0 etc
1082 60-63 char LOCAL/EXPERIMENTAL USE
1084 60-63 block LOCAL/EXPERIMENTAL USE
1095 2 = /dev/scramdisk/2 Second encrypted device
1110 2 = /dev/plink2 Third plink device
1128 65 block SCSI disk devices (16-31)
1135 Partitions are handled in the same way as for IDE
1144 66 block SCSI disk devices (32-47)
1151 Partitions are handled in the same way as for IDE
1160 67 block SCSI disk devices (48-63)
1167 Partitions are handled in the same way as for IDE
1174 2 = /dev/capi20.01 Second CAPI 2.0 application
1181 68 block SCSI disk devices (64-79)
1188 Partitions are handled in the same way as for IDE
1195 69 block SCSI disk devices (80-95)
1202 Partitions are handled in the same way as for IDE
1209 2 = /dev/apslog Logging interface
1215 70 block SCSI disk devices (96-111)
1222 Partitions are handled in the same way as for IDE
1235 128 = /dev/ttyF128 IntelliPort II board 2, port 0
1236 129 = /dev/ttyF129 IntelliPort II board 2, port 1
1238 191 = /dev/ttyF191 IntelliPort II board 2, port 63
1244 71 block SCSI disk devices (112-127)
1251 Partitions are handled in the same way as for IDE
1255 72 char Computone IntelliPort II serial card - alternate devices
1279 Partitions are handled the same way as for Mylex
1283 73 char Computone IntelliPort II serial card - control devices
1288 8 = /dev/ip2ipl2 Loadware device for board 2
1289 9 = /dev/ip2stat2 Status device for board 2
1299 Partitions are handled the same way as for Mylex
1308 Currently for Dolphin Interconnect Solutions' PCI-SCI
1317 Partitions are handled the same way as for Mylex
1334 Partitions are handled the same way as for Mylex
1338 76 char Specialix IO8+ serial card - alternate devices
1351 Partitions are handled the same way as for Mylex
1365 Partitions are handled the same way as for Mylex
1380 Partitions are handled the same way as for Mylex
1384 79 char PAM Software's multimodem boards - alternate devices
1395 Partitions are handled the same way as for Mylex
1408 Partitions are handled in the same way as for IDE
1436 Partitions are handled in the same way as for IDE
1454 Partitions are handled in the same way as for IDE
1460 1 = /dev/mga_vid1 2nd video card
1461 2 = /dev/mga_vid2 3rd video card
1471 Partitions are handled in the same way as for IDE
1485 Partitions are handled in the same way as for IDE
1492 2 = /dev/qcntl1 Second device pushed
1501 Partitions are handled in the same way as for IDE
1516 Partitions are handled in the same way as for IDE
1520 87 char Sony Control-A1 stereo control bus
1531 Partitions are handled in the same way as for IDE
1540 88 block Seventh IDE hard disk/CD-ROM interface
1541 0 = /dev/hdm Master: whole disk (or CD-ROM)
1542 64 = /dev/hdn Slave: whole disk (or CD-ROM)
1544 Partitions are handled the same way as for the first
1548 0 = /dev/i2c-0 First I2C adapter
1549 1 = /dev/i2c-1 Second I2C adapter
1552 89 block Eighth IDE hard disk/CD-ROM interface
1553 0 = /dev/hdo Master: whole disk (or CD-ROM)
1554 64 = /dev/hdp Slave: whole disk (or CD-ROM)
1556 Partitions are handled the same way as for the first
1566 90 block Ninth IDE hard disk/CD-ROM interface
1567 0 = /dev/hdq Master: whole disk (or CD-ROM)
1568 64 = /dev/hdr Slave: whole disk (or CD-ROM)
1570 Partitions are handled the same way as for the first
1573 91 char CAN-Bus devices
1574 0 = /dev/can0 First CAN-Bus controller
1575 1 = /dev/can1 Second CAN-Bus controller
1578 91 block Tenth IDE hard disk/CD-ROM interface
1579 0 = /dev/hds Master: whole disk (or CD-ROM)
1580 64 = /dev/hdt Slave: whole disk (or CD-ROM)
1582 Partitions are handled the same way as for the first
1592 Partitions are handled in the same way as for IDE
1609 2 = /dev/dasda2 First DASD device, block 2
1613 6 = /dev/dasdb2 Second DASD device, block 2
1620 2 = /dev/ipstate State information log file
1641 2 = /dev/pg2 Third parallel port ATAPI device
1663 98 block User-mode virtual block device
1664 0 = /dev/ubda First user-mode block device
1665 16 = /dev/ubdb Second user-mode block device
1668 Partitions are handled in the same way as for IDE
1672 This device is used by the user-mode virtual kernel port.
1702 2 = /dev/amiraid/ar?p2 Second partition
1714 Partitions are handled in the same way as for IDE
1726 write to <arla-drinkers@stacken.kth.se> or see
1740 Partitions are handled the same way as for Mylex
1744 105 char Comtrol VS-1000 serial controller
1745 0 = /dev/ttyV0 First VS-1000 port
1746 1 = /dev/ttyV1 Second VS-1000 port
1755 Partitions are handled the same way as for Mylex
1759 106 char Comtrol VS-1000 serial controller - alternate devices
1760 0 = /dev/cuv0 First VS-1000 port
1761 1 = /dev/cuv1 Second VS-1000 port
1770 Partitions are handled the same way as for Mylex
1783 Partitions are handled the same way as for Mylex
1796 Partitions are handled the same way as for Mylex
1808 Partitions are handled the same way as for Mylex
1823 Partitions are handled the same way as for Mylex
1835 Partitions are handled the same way as for Mylex
1844 There is currently a device-naming conflict between
1856 Partitions are handled in the same way as for IDE
1860 113 char ISI serial card - alternate devices
1865 113 block IBM iSeries virtual CD-ROM
1866 0 = /dev/iseries/vcda First virtual CD-ROM
1867 1 = /dev/iseries/vcdb Second virtual CD-ROM
1888 2 = /dev/ataraid/d0p2
1896 Partitions are handled in the same way as for IDE
1913 115 block NetWare (NWFS) Devices (0-255)
1926 2 = /dev/nwfs/v2 Third NetWare (NWFS) Logical Volume
1938 2 = /dev/umem/d0p2 Second partition of first board
1948 1 = /dev/cosa0c1 1st board, 2nd channel
1950 16 = /dev/cosa1c0 2nd board, 1st channel
1951 17 = /dev/cosa1c1 2nd board, 2nd channel
1956 The EVMS driver uses a layered, plug-in model to provide
1969 2 = /dev/evms/legacyname2 Second EVMS legacy device
1983 2 = /dev/ica1 IBMCA Device 1
1988 1 = /dev/vnet1 2nd virtual network
1991 120-127 char LOCAL/EXPERIMENTAL USE
1993 120-127 block LOCAL/EXPERIMENTAL USE
1998 128-135 char Unix98 PTY masters
2004 128 block SCSI disk devices (128-143)
2011 Partitions are handled in the same way as for IDE
2015 129 block SCSI disk devices (144-159)
2022 Partitions are handled in the same way as for IDE
2028 130 block SCSI disk devices (160-175)
2035 Partitions are handled in the same way as for IDE
2039 131 block SCSI disk devices (176-191)
2046 Partitions are handled in the same way as for IDE
2050 132 block SCSI disk devices (192-207)
2057 Partitions are handled in the same way as for IDE
2061 133 block SCSI disk devices (208-223)
2068 Partitions are handled in the same way as for IDE
2072 134 block SCSI disk devices (224-239)
2079 Partitions are handled in the same way as for IDE
2083 135 block SCSI disk devices (240-255)
2090 Partitions are handled in the same way as for IDE
2094 136-143 char Unix98 PTY slaves
2095 0 = /dev/pts/0 First Unix98 pseudo-TTY
2096 1 = /dev/pts/1 Second Unix98 pseudo-TTY
2177 The SST 5136-DN DeviceNet interface driver has been
2180 144 block Expansion Area #1 for more non-device (e.g. NFS) mounts
2184 145 char SAM9407-based soundcard
2187 2 = /dev/sam0_midi00
2205 145 block Expansion Area #2 for more non-device (e.g. NFS) mounts
2209 146 char SYSTRAM SCRAMNet mirrored-memory network
2214 146 block Expansion Area #3 for more non-device (e.g. NFS) mounts
2233 149 char Technology Concepts serial card - alternate devices
2238 150 char Real-Time Linux FIFOs
2251 2 = /dev/etherd/raw Raw AoE packet monitor
2267 2 = /dev/emd/0p2 Partition 2 on First unit
2272 32 = /dev/emd/2 Third unit
2276 Partitions are handled in the same way as for IDE
2285 155 char Specialix RIO serial card - alternate devices
2295 157 char Specialix RIO serial card - alternate devices
2314 160 block Carmel 8-port SATA Disks on First Controller
2321 64 = /dev/carmel/2 SATA disk 2 whole disk
2325 Partitions are handled in the same way as for IDE
2337 161 block Carmel 8-port SATA Disks on Second Controller
2348 Partitions are handled in the same way as for IDE
2355 2 = /dev/raw/raw2 Second raw I/O device
2362 164 char Chase Research AT/PCI-Fast serial card
2363 0 = /dev/ttyCH0 AT/PCI-Fast board 0, port 0
2365 15 = /dev/ttyCH15 AT/PCI-Fast board 0, port 15
2366 16 = /dev/ttyCH16 AT/PCI-Fast board 1, port 0
2368 31 = /dev/ttyCH31 AT/PCI-Fast board 1, port 15
2369 32 = /dev/ttyCH32 AT/PCI-Fast board 2, port 0
2371 47 = /dev/ttyCH47 AT/PCI-Fast board 2, port 15
2372 48 = /dev/ttyCH48 AT/PCI-Fast board 3, port 0
2374 63 = /dev/ttyCH63 AT/PCI-Fast board 3, port 15
2376 165 char Chase Research AT/PCI-Fast serial card - alternate devices
2386 167 char ACM USB modems - alternate devices
2397 0 = /dev/ecsa8-0 First CSA8000
2398 1 = /dev/ecsa8-1 Second CSA8000
2415 173 char Moxa Intellio serial card - alternate devices
2426 175 char SmartIO serial card - alternate devices
2464 179 char CCube DVXChip-based PCI products
2519 183 char SST 5136-DN DeviceNet interface
2538 http://inter-mezzo.org/index.html
2540 186 char Object-based storage control device
2557 189 char USB serial converters - alternate devices
2572 2 = /dev/profile1 Profiling device for CPU 1
2575 193 char Kernel event-tracing interface
2578 2 = /dev/trace1 Tracing device for CPU 1
2584 2 = /dev/mvideo/frame0 Single compressed frame
2606 2 = /dev/tor/2 Second DS0
2609 49 = /dev/tor/49 First pseudo-channel
2610 50 = /dev/tor/50 Second pseudo-channel
2641 2 = /dev/vx/iod Volume i/o daemon access node
2658 202 char CPU model-specific registers
2670 Partitions are handled in the same way as for IDE
2679 204 char Low-density serial ports
2680 0 = /dev/ttyLU0 LinkUp Systems L72xx UART - port 0
2681 1 = /dev/ttyLU1 LinkUp Systems L72xx UART - port 1
2682 2 = /dev/ttyLU2 LinkUp Systems L72xx UART - port 2
2683 3 = /dev/ttyLU3 LinkUp Systems L72xx UART - port 3
2687 7 = /dev/ttySA2 StrongARM builtin serial port 2
2688 8 = /dev/ttySC0 SCI serial port (SuperH) - port 0
2689 9 = /dev/ttySC1 SCI serial port (SuperH) - port 1
2690 10 = /dev/ttySC2 SCI serial port (SuperH) - port 2
2691 11 = /dev/ttySC3 SCI serial port (SuperH) - port 3
2692 12 = /dev/ttyFW0 Firmware console - port 0
2693 13 = /dev/ttyFW1 Firmware console - port 1
2694 14 = /dev/ttyFW2 Firmware console - port 2
2695 15 = /dev/ttyFW3 Firmware console - port 3
2703 41 = /dev/ttySMX0 Motorola i.MX - port 0
2704 42 = /dev/ttySMX1 Motorola i.MX - port 1
2705 43 = /dev/ttySMX2 Motorola i.MX - port 2
2706 44 = /dev/ttyMM0 Marvell MPSC - port 0 (obsolete unused)
2707 45 = /dev/ttyMM1 Marvell MPSC - port 1 (obsolete unused)
2708 46 = /dev/ttyCPM0 PPC CPM (SCC or SMC) - port 0
2710 47 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 5
2722 148 = /dev/ttyPSC0 PPC PSC - port 0
2724 153 = /dev/ttyPSC5 PPC PSC - port 5
2732 187 = /dev/ttyUL0 Xilinx uartlite - port 0
2734 190 = /dev/ttyUL3 Xilinx uartlite - port 3
2735 191 = /dev/xvc0 Xen virtual console - port 0
2736 192 = /dev/ttyPZ0 pmac_zilog - port 0
2738 195 = /dev/ttyPZ3 pmac_zilog - port 3
2744 207 = /dev/ttySC2 SC26xx serial port 2
2748 211 = /dev/ttyMAX2 MAX3100 serial port 2
2751 205 char Low-density serial ports (alternate device)
2754 2 = /dev/culu2 Callout device for ttyLU2
2787 206 char OnStream SC-x0 tape devices
2794 64 = /dev/osst0m First OnStream SCSI tape, mode 2
2795 65 = /dev/osst1m Second OnStream SCSI tape, mode 2
2813 The OnStream SC-x0 SCSI tapes do not support the
2816 maybe ParPort) versions may be driven via ide-scsi or
2817 usb-storage SCSI emulation and this osst device and
2818 driver as well. The ADR-x0 drives are QIC-157
2824 2 = /dev/cpqhealth/cdt Data Table
2848 2 = /dev/sbei/wan00 WAN device, port 0, board 0
2850 4 = /dev/sbei/wan02 WAN device, port 2, board 0
2854 8 = /dev/sbei/wanc02 WAN clone device, port 2, board 0
2860 14 = /dev/sbei/wan12 WAN device, port 2, board 1
2864 18 = /dev/sbei/wanc12 WAN clone device, port 2, board 1
2878 2 = /dev/dvb/adapter0/sec0 (obsolete/unused)
2884 8 = /dev/dvb/adapter0/osd0 first on-screen-display device of first card
2908 219 char The Logical Company DCI-1300 digital I/O card
2909 0 = /dev/logicalco/dci1300/0 First DCI-1300 card
2910 1 = /dev/logicalco/dci1300/1 Second DCI-1300 card
2916 2 = /dev/myricom/gm1 Second Myrinet GM board
2923 2 = /dev/bus/vme/m2 Third master image
2952 2 = /dev/3270/tty2 Seconds 3270 terminal
2955 228 char IBM 3270 terminal block-mode access
2958 2 = /dev/3270/tub2 Second 3270 terminal
2973 64 = /dev/iseries/vt0m First virtual tape, mode 2
2974 65 = /dev/iseries/vt1m Second virtual tape, mode 2
2985 192 = /dev/iseries/nvt0m First virtual tape, mode 2, no rewind
2986 193 = /dev/iseries/nvt1m Second virtual tape, mode 2, no rewind
3014 2 = /dev/biometric/sensor0/retina first retina sensor on first device
3027 2 = /dev/ipath1 Access specifically to unit 1
3033 234-254 char RESERVED FOR DYNAMIC ASSIGNMENT
3037 240-254 block LOCAL/EXPERIMENTAL USE
3052 ---LARGE MAJORS!!!!!---
3054 256 char Equinox SST multi-port serial boards
3080 258 block ROM/Flash read-only translation layer
3093 260 char OSD (Object-based-device) SCSI Device
3099 384-511 char RESERVED FOR DYNAMIC ASSIGNMENT
3102 once the 234-254 range is full.