Lines Matching +full:dma +full:- +full:channels

1 * DMA40 DMA Controller
4 - compatible: "stericsson,dma40"
5 - reg: Address range of the DMAC registers
6 - reg-names: Names of the above areas to use during resource look-up
7 - interrupt: Should contain the DMAC interrupt number
8 - #dma-cells: must be <3>
9 - memcpy-channels: Channels to be used for memcpy
12 - dma-channels: Number of channels supported by hardware - if not present
14 - disabled-channels: Channels which can not be used
18 	dma: dma-controller@801c0000 {
19 		compatible = "stericsson,db8500-dma40", "stericsson,dma40";
21 		reg-names = "base", "lcpa";
22 		interrupt-parent = <&intc>;
25 		#dma-cells = <2>;
26 		memcpy-channels  = <56 57 58 59 60>;
27 		disabled-channels  = <12>;
28 		dma-channels = <8>;
33 - dmas: Comma separated list of dma channel requests
34 - dma-names: Names of the aforementioned requested channels
37   1. A phandle pointing to the DMA controller
40   3. The DMA request line number (only when 'use fixed channel' is set)
54                 Use DMA request line number when set
72 10: Multi-Channel Display Engine MCDE RX
113 51: memcpy TX (to be used by the DMA driver for memcpy operations)
118 56: memcpy (to be used by the DMA driver for memcpy operations)
119 57: memcpy (to be used by the DMA driver for memcpy operations)
120 58: memcpy (to be used by the DMA driver for memcpy operations)
121 59: memcpy (to be used by the DMA driver for memcpy operations)
122 60: memcpy (to be used by the DMA driver for memcpy operations)
134 		dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
135 		       <&dma 13 0 0x0>; /* Logical - MemToDev */
136 		dma-names = "rx", "rx";