Lines Matching +full:- +full:supply
11 - compatible: "rockchip,rk805"
12 - compatible: "rockchip,rk808"
13 - compatible: "rockchip,rk809"
14 - compatible: "rockchip,rk817"
15 - compatible: "rockchip,rk818"
16 - reg: I2C slave address
17 - interrupts: the interrupt outputs of the controller.
18 - #clock-cells: from common clock binding; shall be set to 1 (multiple clock
19 outputs). See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
22 - clock-output-names: From common clock binding to override the
24 - rockchip,system-power-controller: Telling whether or not this pmic is controlling
28 - vcc1-supply: The input supply for DCDC_REG1
29 - vcc2-supply: The input supply for DCDC_REG2
30 - vcc3-supply: The input supply for DCDC_REG3
31 - vcc4-supply: The input supply for DCDC_REG4
32 - vcc5-supply: The input supply for LDO_REG1 and LDO_REG2
33 - vcc6-supply: The input supply for LDO_REG3
36 - vcc1-supply: The input supply for DCDC_REG1
37 - vcc2-supply: The input supply for DCDC_REG2
38 - vcc3-supply: The input supply for DCDC_REG3
39 - vcc4-supply: The input supply for DCDC_REG4
40 - vcc6-supply: The input supply for LDO_REG1 and LDO_REG2
41 - vcc7-supply: The input supply for LDO_REG3 and LDO_REG7
42 - vcc8-supply: The input supply for SWITCH_REG1
43 - vcc9-supply: The input supply for LDO_REG4 and LDO_REG5
44 - vcc10-supply: The input supply for LDO_REG6
45 - vcc11-supply: The input supply for LDO_REG8
46 - vcc12-supply: The input supply for SWITCH_REG2
47 - dvs-gpios: buck1/2 can be controlled by gpio dvs, this is GPIO specifiers
53 - vcc1-supply: The input supply for DCDC_REG1
54 - vcc2-supply: The input supply for DCDC_REG2
55 - vcc3-supply: The input supply for DCDC_REG3
56 - vcc4-supply: The input supply for DCDC_REG4
57 - vcc5-supply: The input supply for LDO_REG1, LDO_REG2, LDO_REG3
58 - vcc6-supply: The input supply for LDO_REG4, LDO_REG5, LDO_REG6
59 - vcc7-supply: The input supply for LDO_REG7, LDO_REG8, LDO_REG9
62 - vcc8-supply: The input supply for SWITCH_REG1
63 - vcc9-supply: The input supply for DCDC_REG5, SWITCH_REG2
66 - vcc8-supply: The input supply for BOOST
67 - vcc9-supply: The input supply for OTG_SWITCH
70 - vcc1-supply: The input supply for DCDC_REG1
71 - vcc2-supply: The input supply for DCDC_REG2
72 - vcc3-supply: The input supply for DCDC_REG3
73 - vcc4-supply: The input supply for DCDC_REG4
74 - boost-supply: The input supply for DCDC_BOOST
75 - vcc6-supply: The input supply for LDO_REG1 and LDO_REG2
76 - vcc7-supply: The input supply for LDO_REG3, LDO_REG5 and LDO_REG7
77 - vcc8-supply: The input supply for LDO_REG4, LDO_REG6 and LDO_REG8
78 - vcc9-supply: The input supply for LDO_REG9 and SWITCH_REG
79 - h_5v-supply: The input supply for HDMI_SWITCH
80 - usb-supply: The input supply for OTG_SWITCH
86 regulator-name {
94 - DCDC_REGn
95 - valid values for n are 1 to 4.
96 - LDO_REGn
97 - valid values for n are 1 to 3
103 - DCDC_REGn
104 - valid values for n are 1 to 4.
105 - LDO_REGn
106 - valid values for n are 1 to 8.
107 - SWITCH_REGn
108 - valid values for n are 1 to 2
114 - DCDC_REGn
115 - valid values for n are 1 to 5 for RK809.
116 - valid values for n are 1 to 4 for RK817.
117 - LDO_REGn
118 - valid values for n are 1 to 9 for RK809.
119 - valid values for n are 1 to 9 for RK817.
120 - SWITCH_REGn
121 - valid values for n are 1 to 2 for RK809.
122 - BOOST for RK817
123 - OTG_SWITCH for RK817
129 - DCDC_REGn
130 - valid values for n are 1 to 4.
131 - LDO_REGn
132 - valid values for n are 1 to 9.
133 - SWITCH_REG
134 - HDMI_SWITCH
135 - OTG_SWITCH
141 - reset
142 - power down
143 - sleep
152 clock-output-names = "xin32k", "rk808-clkout2";
153 interrupt-parent = <&gpio0>;
155 pinctrl-names = "default";
156 pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>;
157 dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>,
160 rockchip,system-power-controller;
161 wakeup-source;
162 #clock-cells = <1>;
164 vcc8-supply = <&vcc_18>;
165 vcc9-supply = <&vcc_io>;
166 vcc10-supply = <&vcc_io>;
167 vcc12-supply = <&vcc_io>;
168 vddio-supply = <&vccio_pmu>;
172 regulator-always-on;
173 regulator-boot-on;
174 regulator-min-microvolt = <750000>;
175 regulator-max-microvolt = <1300000>;
176 regulator-name = "vdd_arm";
180 regulator-always-on;
181 regulator-boot-on;
182 regulator-min-microvolt = <850000>;
183 regulator-max-microvolt = <1250000>;
184 regulator-name = "vdd_gpu";
188 regulator-always-on;
189 regulator-boot-on;
190 regulator-name = "vcc_ddr";
194 regulator-always-on;
195 regulator-boot-on;
196 regulator-min-microvolt = <3300000>;
197 regulator-max-microvolt = <3300000>;
198 regulator-name = "vcc_io";
202 regulator-always-on;
203 regulator-boot-on;
204 regulator-min-microvolt = <3300000>;
205 regulator-max-microvolt = <3300000>;
206 regulator-name = "vccio_pmu";
210 regulator-always-on;
211 regulator-boot-on;
212 regulator-min-microvolt = <3300000>;
213 regulator-max-microvolt = <3300000>;
214 regulator-name = "vcc_tp";
218 regulator-always-on;
219 regulator-boot-on;
220 regulator-min-microvolt = <1000000>;
221 regulator-max-microvolt = <1000000>;
222 regulator-name = "vdd_10";
226 regulator-always-on;
227 regulator-boot-on;
228 regulator-min-microvolt = <1800000>;
229 regulator-max-microvolt = <1800000>;
230 regulator-name = "vcc18_lcd";
234 regulator-always-on;
235 regulator-boot-on;
236 regulator-min-microvolt = <1800000>;
237 regulator-max-microvolt = <3300000>;
238 regulator-name = "vccio_sd";
242 regulator-always-on;
243 regulator-boot-on;
244 regulator-min-microvolt = <1000000>;
245 regulator-max-microvolt = <1000000>;
246 regulator-name = "vdd10_lcd";
250 regulator-always-on;
251 regulator-boot-on;
252 regulator-min-microvolt = <1800000>;
253 regulator-max-microvolt = <1800000>;
254 regulator-name = "vcc_18";
258 regulator-always-on;
259 regulator-boot-on;
260 regulator-min-microvolt = <3300000>;
261 regulator-max-microvolt = <3300000>;
262 regulator-name = "vcca_codec";
266 regulator-always-on;
267 regulator-boot-on;
268 regulator-name = "vcc_wl";
272 regulator-always-on;
273 regulator-boot-on;
274 regulator-name = "vcc_lcd";