Lines Matching +full:spi +full:- +full:nand

4 - compatible: "lantiq,pinctrl-xway", (DEPRECATED: Use "lantiq,pinctrl-danube")
5 	      "lantiq,pinctrl-xr9", (DEPRECATED: Use "lantiq,xrx100-pinctrl" or
6 					"lantiq,xrx200-pinctrl")
7 	      "lantiq,pinctrl-ase", (DEPRECATED: Use "lantiq,ase-pinctrl")
8 	      "lantiq,<chip>-pinctrl", where <chip> is:
14 - reg: Should contain the physical address and length of the gpio/pinmux
17 Please refer to pinctrl-bindings.txt in this directory for details of the
25 pull-up and open-drain
40 Required subnode-properties:
41 - lantiq,groups : An array of strings. Each string contains the name of a group.
43 - lantiq,function: A string containing the name of the function to mux to the
51     ebu wait, nand ale, nand cs1, nand cle, spi, spi_cs1, spi_cs2, spi_cs3,
57     spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu
62     ebu clk, ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy,
63     nand rd, spi, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6,
69     spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio, gphy
78     spi, asc, cgu, jtag, exin, stp, gpt, mdio, ephy, dfe
83     ebu wait, nand ale, nand cs1, nand cle, spi_di, spi_do, spi_clk, spi_cs1,
89     spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, dfe
94     ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd,
101     spi, asc, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe
106     ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd,
116     spi, usif, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe, gphy
120     exin0, exin1, exin2, exin4, nand ale, nand cs0, nand cs1, nand cle,
121     nand rdy, nand rd, nand_d0, nand_d1, nand_d2, nand_d3, nand_d4, nand_d5,
122     nand_d6, nand_d7, nand_d1, nand wr, nand wp, nand se, spi_di, spi_do,
128     spi, usif, cgu, exin, stp, ebu, mdio, dfe, ephy
133 Required subnode-properties:
134 - lantiq,pins : An array of strings. Each string contains the name of a pin.
137 Optional subnode-properties:
138 - lantiq,pull: Integer, representing the pull-down/up to apply to the pin.
140 - lantiq,open-drain: Boolean, enables open-drain on the defined pin.
143   Pinconf pins can be referenced via the names io0-io31.
146   Pinconf pins can be referenced via the names io0-io55.
149   Pinconf pins can be referenced via the names io0-io31.
152   Pinconf pins can be referenced via the names io0-io31.
155   Pinconf pins can be referenced via the names io0-io55.
158   Pinconf pins can be referenced via the names io0-io49.
161   Pinconf pins can be referenced via the names io0-io1,io3-io6,io8-io11,
162 						io13-io19,io23-io27,io34-io36,
163 						io42-io43,io48-io61.
167 		compatible = "lantiq,danube-pinctrl";
168 		pinctrl-names = "default";
169 		pinctrl-0 = <&state_default>;
171 		#gpio-cells = <2>;
172 		gpio-controller;
186 				lantiq,open-drain;