Lines Matching +full:spi +full:- +full:nand

6 the right in-kernel and userspace APIs/ABIs for the job, and that these
10 - leds-gpio: drivers/leds/leds-gpio.c will handle LEDs connected to  GPIO
13 - ledtrig-gpio: drivers/leds/trigger/ledtrig-gpio.c will provide a LED trigger,
15   (and that LED may in turn use the leds-gpio as per above).
17 - gpio-keys: drivers/input/keyboard/gpio_keys.c is used when your GPIO line
20 - gpio-keys-polled: drivers/input/keyboard/gpio_keys_polled.c is used when your
24 - gpio_mouse: drivers/input/mouse/gpio_mouse.c is used to provide a mouse with
29 - gpio-beeper: drivers/input/misc/gpio-beeper.c is used to provide a beep from
32 - extcon-gpio: drivers/extcon/extcon-gpio.c is used when you need to read an
36 - restart-gpio: drivers/power/reset/gpio-restart.c is used to restart/reboot
40 - poweroff-gpio: drivers/power/reset/gpio-poweroff.c is used to power the
45 - gpio-gate-clock: drivers/clk/clk-gpio.c is used to control a gated clock
48 - i2c-gpio: drivers/i2c/busses/i2c-gpio.c is used to drive an I2C bus
53 - spi_gpio: drivers/spi/spi-gpio.c is used to drive an SPI bus (variable number
55   GPIO hammering (bitbang). It will appear as any other SPI bus on the system
56   and makes it possible to connect drivers for SPI devices on the bus like
57   any other SPI bus driver. For example any MMC/SD card can then be connected
58   to this SPI by using the mmc_spi host from the MMC/SD card subsystem.
60 - w1-gpio: drivers/w1/masters/w1-gpio.c is used to drive a one-wire bus using
64 - gpio-fan: drivers/hwmon/gpio-fan.c is used to control a fan for cooling the
66   presenting all the right in-kernel and sysfs interfaces to make your system
69 - gpio-regulator: drivers/regulator/gpio-regulator.c is used to control a
73 - gpio-wdt: drivers/watchdog/gpio_wdt.c is used to provide a watchdog timer
75   it from 1-to-0-to-1. If that hardware does not receive its "ping"
78 - gpio-nand: drivers/mtd/nand/raw/gpio.c is used to connect a NAND flash chip
80   NAND flash MTD subsystem and provides chip access and partition parsing like
81   any other NAND driving hardware.
83 - ps2-gpio: drivers/input/serio/ps2-gpio.c is used to drive a PS/2 (IBM) serio
88 - cec-gpio: drivers/media/platform/cec-gpio/ is used to interact with a CEC
92 - gpio-charger: drivers/power/supply/gpio-charger.c is used if you need to do
102 MTD NOR flash has add-ons for extra GPIO lines too, though the address bus is
108 speed up your embedded hacking in particular by providing ready-made components.