Lines Matching full:should

7 driver.  It is not complete, any questions you have should be directed to
73 	this function should return TIOCSER_TEMT, otherwise return 0.
74 	If the port does not support this operation, then it should
94 	If the appropriate bit is set, the signal should be driven
95 	active.  If the bit is clear, the signal should be driven
106 	of the outputs should not be returned, since the core keeps
107 	track of their state.  The state information should include:
115 	the port does not support CTS, DCD or DSR, the driver should
117 	not available, the signal should not be indicated as active.
130 	The driver should stop transmitting characters as soon as
150 	close to full, and it should somehow signal that no more characters
151 	should be sent to the serial port.
194 	interrupts should be disabled when the shutdown method is
205 	nonzero, the break signal should be transmitted.  The signal
206 	should be terminated when another call is made with a zero
213 	state.  Enable the port for reception.  It should not activate
224 	effect, and free any interrupt resources.  It should not disable
323 	This function should not be used to grab any resources.
352 	If any fail, no resources should be registered when this function
353 	returns, and it should return -EBUSY on failure.
363 	port->type should be set to the type found, or PORT_UNKNOWN if
367 	which should be probed using standard kernel autoprobing techniques.
394 	this should not request interrupts.
402 	port.  It can and should block until there is space in the TX FIFO.
412 	port.  If data is available, it should be returned; otherwise
413 	the function should return NO_POLL_CHAR immediately.
471 	Locking: port->lock should be held.
479 	drv->port should be NULL, and the per-port structures should be