Lines Matching +full:pinctrl +full:-
1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Copyright 2012 ST-Ericsson AB
6 #include <dt-bindings/interrupt-controller/irq.h>
7 #include <dt-bindings/leds/common.h>
8 #include "ste-href-family-pinctrl.dtsi"
18 pinctrl-names = "default", "sleep";
19 pinctrl-0 = <&u0_a_1_default>;
20 pinctrl-1 = <&u0_a_1_sleep>;
26 pinctrl-names = "default", "sleep";
27 pinctrl-0 = <&u1rxtx_a_1_default>;
28 pinctrl-1 = <&u1rxtx_a_1_sleep>;
32 pinctrl-names = "default", "sleep";
33 pinctrl-0 = <&u2rxtx_c_1_default>;
34 pinctrl-1 = <&u2rxtx_c_1_sleep>;
39 pinctrl-names = "default","sleep";
40 pinctrl-0 = <&i2c0_a_1_default>;
41 pinctrl-1 = <&i2c0_a_1_sleep>;
46 pinctrl-names = "default","sleep";
47 pinctrl-0 = <&i2c1_b_2_default>;
48 pinctrl-1 = <&i2c1_b_2_sleep>;
53 pinctrl-names = "default","sleep";
54 pinctrl-0 = <&i2c2_b_2_default>;
55 pinctrl-1 = <&i2c2_b_2_sleep>;
61 clock-mode = /bits/ 8 <2>;
62 #address-cells = <1>;
63 #size-cells = <0>;
66 led-cur = /bits/ 8 <0x2f>;
67 max-cur = /bits/ 8 <0x5f>;
69 linux,default-trigger = "heartbeat";
73 led-cur = /bits/ 8 <0x2f>;
74 max-cur = /bits/ 8 <0x5f>;
79 led-cur = /bits/ 8 <0x2f>;
80 max-cur = /bits/ 8 <0x5f>;
88 clock-mode = /bits/ 8 <2>;
89 #address-cells = <1>;
90 #size-cells = <0>;
93 led-cur = /bits/ 8 <0x2f>;
94 max-cur = /bits/ 8 <0x5f>;
99 led-cur = /bits/ 8 <0x2f>;
100 max-cur = /bits/ 8 <0x5f>;
105 led-cur = /bits/ 8 <0x2f>;
106 max-cur = /bits/ 8 <0x5f>;
117 pinctrl-names = "default","sleep";
118 pinctrl-0 = <&i2c3_c_2_default>;
119 pinctrl-1 = <&i2c3_c_2_sleep>;
124 vmmci: regulator-gpio {
125 compatible = "regulator-gpio";
127 regulator-min-microvolt = <1800000>;
128 regulator-max-microvolt = <2900000>;
129 regulator-name = "mmci-reg";
130 regulator-type = "voltage";
132 startup-delay-us = <100>;
140 arm,primecell-periphid = <0x10480180>;
141 max-frequency = <100000000>;
142 bus-width = <4>;
143 cap-sd-highspeed;
144 cap-mmc-highspeed;
145 sd-uhs-sdr12;
146 sd-uhs-sdr25;
147 full-pwr-cycle;
148 st,sig-dir-dat0;
149 st,sig-dir-dat2;
150 st,sig-dir-cmd;
151 st,sig-pin-fbclk;
152 vmmc-supply = <&ab8500_ldo_aux3_reg>;
153 vqmmc-supply = <&vmmci>;
154 pinctrl-names = "default", "sleep";
155 pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>;
156 pinctrl-1 = <&mc0_a_1_sleep>;
163 arm,primecell-periphid = <0x10480180>;
164 max-frequency = <100000000>;
165 bus-width = <4>;
166 non-removable;
167 pinctrl-names = "default", "sleep";
168 pinctrl-0 = <&mc1_a_1_default>;
169 pinctrl-1 = <&mc1_a_1_sleep>;
176 arm,primecell-periphid = <0x10480180>;
177 max-frequency = <100000000>;
178 bus-width = <8>;
179 cap-mmc-highspeed;
180 non-removable;
181 vmmc-supply = <&db8500_vsmps2_reg>;
182 pinctrl-names = "default", "sleep";
183 pinctrl-0 = <&mc2_a_1_default>;
184 pinctrl-1 = <&mc2_a_1_sleep>;
189 // On-board eMMC
191 arm,primecell-periphid = <0x10480180>;
192 max-frequency = <100000000>;
193 bus-width = <8>;
194 cap-mmc-highspeed;
195 non-removable;
196 vmmc-supply = <&ab8500_ldo_aux2_reg>;
197 pinctrl-names = "default", "sleep";
198 pinctrl-0 = <&mc4_a_1_default>;
199 pinctrl-1 = <&mc4_a_1_sleep>;
205 pinctrl-names = "default";
206 pinctrl-0 = <&msp0txrxtfstck_a_1_default>;
211 pinctrl-names = "default";
212 pinctrl-0 = <&msp1txrx_a_1_default>;
217 pinctrl-names = "default";
218 pinctrl-0 = <&msp2_a_1_default>;
227 ab8500-gpiocontroller {
231 pinctrl-names = "default", "sleep";
232 pinctrl-0 = <&usb_a_1_default>;
233 pinctrl-1 = <&usb_a_1_sleep>;
236 ab8500-regulators {
238 regulator-name = "V-DISPLAY";
242 regulator-name = "V-eMMC1";
246 regulator-name = "V-MMC-SD";
250 regulator-name = "V-INTCORE";
254 regulator-name = "V-TVOUT";
258 regulator-name = "V-AUD";
262 regulator-name = "V-AMIC1";
266 regulator-name = "V-AMIC2";
270 regulator-name = "V-DMIC";
274 regulator-name = "V-CSI/DSI";
280 pinctrl {
289 pinctrl-names = "default", "sleep";
290 pinctrl-0 = <&lcd_default_mode>;
291 pinctrl-1 = <&lcd_sleep_mode>;